TRIMBLE CERTIFIED TRAINING Total Station … DETAILS: § Total Station Calibrations, Adjustments, &...

1
COURSE DETAILS: § Total Station Calibrations, Adjustments, & Parts § Trimble Access Job & Survey Style Settings § Station Setup & Resection Tips & Procedures § Trimble VISION Functions § Point Stakeout § Traversing & Traverse Adjustments § Cover the Various Measurement Methods TRIMBLE CERTIFIED TRAINING Total Station Surveying ANCHORAGE, AK October 27, 2016 * Please make sure you have received registration confirmation from us BEFORE attending class. Class size is limited & classes fill up fast, so register TODAY ! Or Register on our website, at: www.frontierprecision.com SESSION DETAILS: LOCATION: 5701 Silverado Way, Unit J | Anchorage, AK 99518 TIME: 8:00 a.m. – 5:00 p.m. [Class starts at 8:15 a.m.] COST: $350.00 / Per Student DURATION: 1-Day (Lunch IS included.) WANT MORE INFORMATION? CONTACT: Andrew Munson, Applied Geospatial Engineer 5480 West 60th Avenue, Unit A, Arvada, CO 80003 andrew@frontierprecision.com 720.214.3500 or 800.652.1522 [Toll Free] 720.214.3503 [Fax] www.frontierprecision.com This one day session will cover working hands-on with Trimble S Series Robotic Total Stations & Access. Authorized Certified Trainer

Transcript of TRIMBLE CERTIFIED TRAINING Total Station … DETAILS: § Total Station Calibrations, Adjustments, &...

COURSE DETAILS:

§ Total Station Calibrations, Adjustments, & Parts

§ Trimble Access Job & Survey Style Settings

§ Station Setup & Resection Tips & Procedures

§ Trimble VISION Functions

§ Point Stakeout

§ Traversing & Traverse Adjustments

§ Cover the Various Measurement Methods

TRIMBLE CERTIFIED TRAINING

Total Station SurveyingANCHORAGE, AK

October 27, 2016

* Please make sure you have received registration confirmation from us BEFORE attending class.

REGISTRATION CLOSES OCTOBER 14TH!

Class size is limited& classes fill up fast, so

register TODAY !

Or Register on our website, at: www.frontierprecision.com

SESSION DETAILS:LOCATION: 5701 Silverado Way, Unit J | Anchorage, AK 99518

TIME: 8:00 a.m. – 5:00 p.m. [Class starts at 8:15 a.m.] COST: $350.00 / Per Student

DURATION: 1-Day (Lunch IS included.)

WANT MORE INFORMATION? CONTACT:Andrew Munson, Applied Geospatial Engineer

5480 West 60th Avenue, Unit A, Arvada, CO [email protected]

720.214.3500 or 800.652.1522 [Toll Free]720.214.3503 [Fax]

www.frontierprecision.com

PRE-REGISTRATION IS REQUIRED!

This one day session will cover working hands-on with Trimble S Series Robotic Total Stations & Access.

Authorized Certified Trainer