TRILUX INDOOR - proljus.se

T·200

Only by applying new methods can you reach new goals.Accentuation and general lighting combined in a single lighting system – that is the tubular track series T·200. Flexible cardanic spotlights allow for focussed lighting of objects, small or large, while slender translucent modules provide a uniform general lighting. With four different light-active systems, the T·200 series opens up a wide variety of new lighting design and accentuation paths – and an exceptionally large scope for creative lighting solutions.

Light in motionSystems for accent lighting must allow flexible adaptation to new lighting tasks. T·200 spot-lights are an exemplary solution that offers optimum scope for movement due to the cardanic suspension technology.

Wiring passage in tubular tracksThe tubular tracks of the T·200 system are open towards the ceiling and can easily be equipped with through-wiring sets. Separate switching of luminaire and spotlight modules can be simply acheived by use of separate mains cables within the tubular tracks.

Aesthetics and functionalityThe slender translucent modules offer attrac-tive photometrics: optical system, adapter units and T·200 tubular tracks form an integrated whole. The progressive design is effectively enhanced by the colours of the system components.

∅90

166498

166

∅90 ∅90

166676166

∅90

166

∅90

239

102

∅90

166320

C0- C180

C0- C180

5951/QT50 ET 5952/QT50 ET 5953/QT50 ET

5952/QT50 ET5951/QT50 ET 5953/QT50 ET

T·200Spotlight modules for low-voltage halogen lamps, with highly-specular reflector, beam angle 10°or specular facetted reflector, beam angle 8°

6 5 4 d a

Application Low-voltage spotlight modules for tubular track system T·200. For brilliant accent lighting in sales areas, showrooms, reception halls, conference rooms, corridors, hotels, and restaurants.

Reflectors 5951··· For low-voltage halogen lamps 12 V, 20 to 50 W, socket GY6.35, preferably with axial filament. Highly-specular reflector made of anodised aluminium, beam angle 10°.

5951 HO··· For low-voltage halogen lamps 12 V, 35 to 50 W, socket GY6.35, preferably with axial filament. With highly-specular reflector made of anodised aluminium, with specular facetted surface, beam angle 8°.

Luminaire body Silver-grey, similar to RAL 9006. Consisting of aluminium swivel frame and aluminium reflector housing as well as end adapter elements in aluminium/plastic material with integral electronic transformer. Reflector housing can be pivoted in two planes. 5951··· Single module. 5952··· Double module. 5953··· Triple module.

Electrical connection Luminaires supplied ready for connection, with three terminals for mains connection within the rod and for further wiring. Wiring of the rod system to be carried out by the installer.

Control gear option With electronic transformer. Dimming is possible when combined with phase-chop dimmers to be provided by the client.

IP20 0.2 Joule 850 °C

595···/QT50

595··· HO/QT90

166572

∅130

166

∅130

102

239

166394

∅130

166750

∅130

166

∅130

166

∅130

5951/QT90 ET 5952/QT90 ET 5953/QT90 ET

5951 HO/QT90 ET 5952 HO/QT90 ET 5953 HO/QT90 ET

Reference TOC Lamps Minimum distance ≈kg Lamp W m 5951/QT50 ET 12 216 40 1 x QT12, 50 0.80 1.25952/QT50 ET 12 224 40 2 x QT12, 50 0.80 1.75953/QT50 ET 12 228 40 3 x QT12, 50 0.80 2.2 5951 HO/QT90 ET 12 223 40 1 x QT12 max. 100 1.00 1.45952 HO/QT90 ET 12 227 40 2 x QT12 max. 100 1.00 2.25953 HO/QT90 ET 12 231 40 3 x QT12 max. 100 1.00 3.0

Accessories ······························· 86Lamp characteristics ···············525

C0- C180

30 ° 10°

C0- C180

5951 HO/QT150 5952 HO/QT150 5953 HO/QT150

5952 HO/QT1505951 HO/QT150 5953 HO/QT150

T·200Spotlight modules for mains-voltage halogen lamps, with semi-specular reflector, beam angle 33°or mains-voltage halogen reflector lamps, beam angle 10°/30°

6 5 4 d a

Recommended areasMains-voltage modules for tubular track system T·200. ···QT150··· For illuminating larger surfaces in sales areas, showrooms, reception halls, conference rooms, corridors, hotels, restau-rants.···QPAR75··· For sales areas, showrooms, reception halls, conference rooms, corridors, hotels, restaurants.

Reflectors/Lamps···QT150··· For mains-voltage halogen lamps 230 V, 60 to 150 W, socket E27, preferably with semi-specular encapsulated bulb. Semi-specular reflector made of anodised alumini-um, beam angle 33°. ···QPAR75··· For mains-voltage halogen lamps 75 W with PAR reflector, socket E27, beam angle 10° or 30°.

Luminaire body Silver-grey, similar to RAL 9006. Consisting of aluminium swivel frame and aluminium reflector housing as well as minimised end adapter elements in aluminium/plastic material. Reflector housing can be pivoted in two planes. 5951··· Single module. 5952··· Double module. 5953··· Triple module.


Control gear option No electronic equipment required, lamp operates directly on mains voltage.

IP20 0.2 Joule 850 °C

···HO/QT150

···HO/QPAR75

118

239

166320

∅130

166676

∅130

166

∅130 ∅130

166166498

∅130

166

∅130

5951 HO/QPAR75 5952 HO/QPAR75 5953 HO/QPAR75

5953 HO/QPAR755952 HO/QPAR755951 HO/QPAR75

Reference TOC Lamps Minimum distance ≈kg Lamp W m 5951 HO/QT150 12 222 10 1 x QT32 max. 150 0.30 1.45952 HO/QT150 12 226 10 2 x QT32 max. 150 0.30 2.35953 HO/QT150 12 230 10 3 x QT32 max. 150 0.30 3.0 5951 HO/QPAR75 12 221 10 1 x QPAR75 0.45 1.45952 HO/QPAR75 12 225 10 2 x QPAR75 0.45 2.25953 HO/QPAR75 12 229 10 3 x QPAR75 0.45 3.0


145

239

366520

∅130

C0- C180

C0- C180

5951 HO/HIT··· 5951 HO/HST···

5951···HO/HIT··· 5951···HO/HST···

T·200Spotlight modules for high-pressure lamps with facetted reflector HIT, beam angle 13°, or with semi-specular reflector HST, beam angle 33°

6 5 4 d a

Reference TOC Lamps Minimum distance ≈kg Lamp W m 5951 HO/HIT35 K 12 217 02 1 x HIT35 0.35 3.35951 HO/HIT70 K 12 218 02 1 x HIT70 0.80 3.5 5951 HO/HST50 K 12 220 02 1 x HST50 0.35 3.45951 HO/HST100 K 12 219 02 1 x HST100 0.80 4.3

Application High-pressure lamp modules for tubular track system T·200. For economic accent lighting in sales areas, showrooms, reception halls, conference rooms, corridors, hotels, and res-taurants.

Reflector HIT For metal halide lamps 35 W or 70 W, preferably in ceramic version, socket G12. Highly-specular reflector made of anodised aluminium, with facetted brilliant surface and integrated safety glass with UV protection. Beam angle 13°.

Reflector HST For high-pressure sodium vapour lamps 50 W or 100 W, socket PG12-1, in version with improved colour rendering. Semi-specular reflector made of anodised aluminium, beam angle 33°.

Luminaire body Silver-grey, similar to RAL 9006. Consisting of aluminium swivel frame and aluminium reflector housing as well as end adapter elements in aluminium/plastic material. Re-flector housing can be pivoted in two planes.


Control gear option With inductive ballast, parallel-compensated.

IP20 0.2 Joule 850 °C

5951···HIT···

5951···HST···

64

239

224450

95

64

239

224376

95

C0- C180

C0- C180

5961 RSV/QTDE150 5961 RPX/TCD26 E50°

5961 RSV/QTDE150 5961 RPX/TCD26 E

T·200Compact adjustable modules with cross-blade louvre RSV for halogen lampsor with highly-specular louvre RPX for compact fluorescent lamps

6 5 4 d a

Reference TOC Lamps Minimum distance ≈kg Lamp W m 5961 RSV/QTDE150 12 239 10 1 x QT-DE150 0.20 1.05961 RPX/TCD26 E 12 238 04 1 x TC-DEL26 0.20 1.3

Application Direct adjustable modules for tubular track system T·200. For accent lighting effects in sales areas, showrooms, reception halls, conference rooms, corridors, hotels, and res-taurants.

Louvre ···RSV··· Semi-specular louvre with graduated concave profile cross blades made of anodised aluminium, for narrow/wide-angle light distri-bution. ···RPX··· Micro-segmented, highly-specular louvre made of reflection-intensifying alumin-ium.

Luminaire body Silver-grey, similar to RAL 9006, consisting of adjustable louvre module in compact version, manoeuvrability ±50° for accent lighting effects, and end adapter elements in aluminium/plas-tic material.


Control gear option ···QTDE150 For mains-voltage halogen lamp 150 W, socket R7s, no electronic equipment required, lamp operates directly on mains voltage.

···TCD26 E With electronic control gear for compact fluorescent lamp TC-D 26 W.


IP20 2 Joule 850 °C ···RPX···

5961 RSV/QTDE150UTE: 0.49 B + 0.00 TDIN 5040: A60CIBSE: BZ 3/1.25/BZ 2NBN L 14-002: BZ 2

5961 RPX/TCD26 EUTE: 0.35 B + 0.00 TDIN 5040: A50CIBSE: BZ 1NBN L 14-002: BZ 2/1.5/BZ 1/4/BZ 2

594/24W, 894/39W

C0- C180 C0- C180

5961 RPX···

5961 RPX···

T·200Adjustable modules with highly-specular parabolic louvre RPXfor T5 fluorescent lamps

6 5 4 d a

Reference TOC Lamps L ≈kg W mm 5961 RPX/24 E 12 234 04 1 x 24 890 1.75961 RPX/39 E 12 237 04 1 x 39 1190 2.15961 RPX/2x24 E 12 235 04 2 x 24 890 1.85961 RPX/2x39 E 12 236 04 2 x 39 1190 2.3

Application Direct/indirect adjustable modules for tubular track system T·200. For accent lighting of ex-pansive surfaces in sales areas, showrooms, reception halls, conference rooms, corridors, hotels, and restaurants.

Louvre RPX Micro-segmented, highly-specular louvre made of reflection-intensifying aluminium.

Luminaire body Silver-grey, similar to RAL 9006, consisting of adjustable louvre module in compact version, manoeuvrability ±50° for accent lighting effects, and end adapter elements in aluminium/plastic material.


Control gear option With electronic control gear.

IP20 2.0 Joule 850 °C

5961 RPX/39EUTE: 0.36 B + 0.59 TDIN 5040: D62CIBSE: BZ 2NBN L 14-002:BZ 2/.8/BZ 1

632/24W, 932/39W

C0- C180

5971 PST···

5971 PST···

Reference TOC Lamps L ≈kg W mm 5971 PST/24 E 12 241 04 1 x 24 930 1.45971 PST/39 E 12 242 04 1 x 39 1230 1.6


Recommended areasTranslucent modules for tubular track system T·200. For increased lighting comfort in sales areas, showrooms, conference rooms as well as in offices, banks and service counter areas.

Double-reflection system PSTTranslucent module, consisting of primary reflector with enveloping primary diffuser. Primary reflector made of reflection-intensify-ing aluminium, with slot perforation, primary diffuser made of translucent PLEXIGLAS. The ceiling surface acts as a secondary reflector and thus creates a comfortable luminance contrast.

Luminaire bodyConsisting of chromed brass fixings for trans-lucent module and end adapter elements in aluminium/plastic material.


Control gear option With electronic control gear.

6 5 4 d a IP20 0.5 Joule 650 °C

T·200Translucent modules with double-reflection system PST for T5 fluorescent lamps

5971 PST/39 EUTE: 0.20 J + 0.64 TDIN 5040: D22CIBSE: BZ 7/.75/BZ 6/1/BZ 7/4/BZ 8NBN L 14-002:BZ 7/1.5/BZ 8

C0- C180

C0- C180

C0- C180

5931 RSX···

T·200Luminaires with semi-specular louvre RSX, highly-specular louvre RPXor with task-area louvre AD for T5 fluorescent lamps

6 5 d 4 a IP20 2.0 Joule 850 °C

5941 AD/2x54 EUTE: 0.12 D + 0.78 TDIN 5040: D23CIBSE: BZ 4/1/BZ 3NBN L 14-002:BZ 4/.8/BZ 3

5931 RPX/2x35 EUTE: 0.38 B + 0.55 TDIN 5040: C53CIBSE: BZ 2/2/BZ 1NBN L 14-002:BZ 2/3/BZ 1/4/BZ 2

5931 RPX/35 EUTE: 0.36 B + 0.59 TDIN 5040: D62CIBSE: BZ 2NBN L 14-002:BZ 2/.8/BZ 1

Recommended areasLouvre luminaires with direct/indirect light distribution for T·200 tubular track system, for offices, sales areas, showrooms and financial institutions, especially recommended for VDU workstations.···AD··· For task area lighting of single or twin-desk workstations.

Optical systemSuitable for VDU applications in accordance with EN 12464-1 due to low luminance L ≤ 1000 cd/m2 at critical angles above 65° in all planes. Louvre retention by means of spring-tensioned clips, providing earth continuity. Louvre can be lowered and hung from either side without tools.···RSX··· Direct/indirect light distribution. Micro-segmented parabolic louvre made of made of reflection-intensifying, semi-specular aluminium with a surface purity of 99.99 %.···RPX··· Direct/indirect light distribution. Micro-segmented parabolic louvre made of made of reflection-intensifying, highly-specular aluminium with a surface purity of 99.99 %. ···AD··· Special task-area louvre for increased contrast rendering. Direct/indirect louvre made of reflection-intensifying, highly-specular aluminium with a surface purity of 99.99 %.

Luminaire body Sheet steel, silver-grey, similar to RAL 9006, in slender profile design. With integral end caps in die-cast aluminium and integrated fixing brackets.

Electrical connectionSupplied ready for connection, with three or five (···ED) terminals for mains connection within the rod system and for further wiring. Wiring of the rod system to be performed by the client.

Control gear optionsVersions ···/14/24···, ···/28/54··· and ···/35/49/80··· in Multi-Lamp technology allow operation of T5 lamps with different wattages.···E With electronic control gear.···ED With dimmable electronic control gear with 1-10 V interface.

5931 RSX/RPX···, 5941 AD···

5941 AD···5931 RPX···


Reference TOC Control gear options Lamps L ≈kg ···E ···ED W mm 5931 RSX/28/54··· 40 723··· ···04 ···05 1 x 28/54 1230 3.25931 RSX/35/49/80··· 33 996··· ···04 ···05 1 x 35/49/80 1530 3.75931 RSX/2x28/54··· 51 688··· ···04 ···05 2 x 28/54 1230 3.55931 RSX/2x35/49··· 51 689··· ···04 ···05 2 x 35/49 1530 4.05931 RSX/2x80··· 51 690··· ···04 ···05 2 x 80 1530 4.0 5931 RPX/28/54··· 33 958··· ···04 ···05 1 x 28/54 1230 3.25931 RPX/35/49/80··· 33 982··· ···04 ···05 1 x 35/49/80 1530 3.75931 RPX/2x28/54··· 33 970··· ···04 ···05 2 x 28/54 1230 3.55931 RPX/2x35/49··· 33 977··· ···04 ···05 2 x 35/49 1530 4.05931RPX/2x80··· 51 687··· ···04 ···05 2 x 80 1530 4.0 5941 AD/2x14/24··· 51 676··· ···04 ···05 2 x 14/24 630 4.95941 AD/2x28/54··· 49 695··· ···04 ···05 2 x 28/54 1230 5.45941AD/2x35/49··· 51 691··· ···04 ···05 2 x 35/49 1530 6.35941 AD/2x80··· 12 215··· ···04 ···05 2 x 80 1530 6.3

c

fi

bb

The trunking rods form a wiring channel forthrough-wiring on site. The wiring is madeusing commercial light plastic-sheathedcables. The luminaires placed on the tubulartrack system are connected within the rods bymeans of the through-wiring. For this purpose, each luminaire has a connection terminallocated outside the end cap.

The jointed connectors allow the corners tobe continuously adjustable, between angles of90° and 270°. The resulting different rodlengths depending on the respective adjustedangle are indicated in the table below.

RodsAluminium, naturally anodised, ¶ 28 mm.

05930/I/35 1 pair, 1800 mm 21 738 0005930/II/35 1 pair, 3200 mm 21 740 0005930/III/35 1 pair, 4800 mm 21 742 00

Rod closure1 piece., to close the upper side of the rods05930/···/35. Plastic, light-grey, 1600 mmlong, to be snapped into the rods without tools. Cut to length on site, if necessary.

05930 AP 21 745 00

05900 A* 21 725 0005900 AN* 21 726 00Suitable to accommodate a ceiling fixing unit for the wire suspensions 05930 S···.

Ceiling rose1 piece, to connect the mains cable in case of ceiling outlets.

Feeding tube (not illustrated)1 piece, 1700 mm long, to be shortened on site.

05302 ZR 21 618 00

Fixing aid1 pair, to allow precise premounting of rod pairs.

05930 MH 21 751 00

End caps1 pair, to close the rod ends 05930/···/35.Chrome-plated plastic end caps, snapped into place without tools.

Connector1 pair, to be inserted in rods without tools05930/···/35. Straight aluminium internalconnector.

Distance module (not illustrated)1 piece, necessary, if rod sections greaterthan 2000 mm are not equipped with luminaires.

Suspension distances max. 1500 mm.Load max. 6.5 kg.A suspension distance of max. 2000 mmis only permissible, if the length of eachluminaire between the wire suspensionsis at least 800 mm.

05930 E 21 746 0005930 K 21 749 00

05930 AM 21 744 00

Angle Distancefi b/mm c/mm90° 200 283100° 168 261110° 140 244120° 115 231130° 93 221140° 73 213150° 54 207160° 35 203170° 17 201180° 0 200

Wall adapter1 pair, to fix rods to walls without tools05930/···/35. Chrome-plated plastic walladapter, snapped on to rods without tools,with entry for mains cable.

05930 WA 21 756 00

T·200Mounting instructions and accessories

Wire suspensions1 pair, for suspension heights of up to 1.5 m,for continuous height adjustment without tools.

* Incoming cables not included in scope of deli-very; they must be provided by the contractor.

Jointed connector1 pair, chrome finish, continuously adjustable,from 90° to 270°. With 5-core wiring 1.5 mm2.

Node adapters1 piece, die-cast aluminium, structured finish, steel-grey. For the connection of rods 05930/···/35 to nodes 05900 SV or 05900 PV.

Overhead reflectorsSheet steel, photometrically effective surface,white, exterior surface silver-grey. Easy attach-ment to luminaire body and potential equalisa-tion by means of screw connection.···DR··· Closed version.···DG··· Perforated version.

Node1 piece, consisting of: 1 node for up to four connections, angles continuously adjustable between 90° and 270°, coated in aluminium paint.

Overhead reflectorsPolycarbonate, white. Designed to convert adjustable modules into luminaires with a predominantly downward light output. To be attached without tools.

05930 GK 21 747 00

Jointed connector with wire suspension1 pair, as 05930 GK, but with continuouslyadjustable wire suspension, for suspensionlengths of up to 1.5 m.

05930 GKS 21 748 00

05931 DR/28 21 761 00For luminaires 5931···28 W.05931 DR/35 21 762 00For luminaires 5931···35 W.05931 DG/28 21 759 00For luminaires 5931···28 W.05931 DG/35 21 760 00For luminaires 5931···35 W.

05960 DR/24 21 763 00For 596···RPX/24 E.05960 DR/39 21 764 00For 596···RPX/39 E.

05930 SV 21 755 00For 2-point fixing.05930 S 21 753 00As 05930 SV, but with step-free adjustment by means of a screwdriver.

05930 KA 21 750 00 05900 PV, with pendant suspension 29 228 001 pendant rod steel, chromed, ¶ 13 mm, 800 mm long, with vernier clip, suspension length can be shortened on site, ceiling rose, chromed.05900 SV, with wire suspension 29 227 001 steel wire, ¶ 2 mm, for suspension lengthsof up to 1.5 m, 1 ceiling element with screwfix.

TRILUX säljs i Sverige genom:

PROLJUS ABKyrkogatan 18570 03 VRIGSTAD

[email protected]

Björn Celé[email protected] 05 63

Johan Celé[email protected] 29 63

TRILUX INDOOR - proljus.se

Documents

Transcript of TRILUX INDOOR - proljus.se