TREE ACCESSTREE ACCESS© Andrea Giazzi, Corde Access, Switzerland

TREE ACCESSSit harness "TREE ACCESS" +Chest harness "Access Chest”

+Rigid seat "Access Swing" Sizes: 1: S-L, 2: L-XXL (sit and chest parts);

one size fits all (rigid seat)

Weight (size 1): sit harness 1750g,

chest harness 550g, rigid seat 1300g.

P.P.E. Against falls from a height.EN 813 - Sit harnessEN 358 - Belt for work positioningEN 361 - Full body harness

(combined use of Tree Access and Access Chest)Certified for maximum user’s weight of 150kg.

The ultimate tree climbing harness: conceived by tree-climbers, tested by tree-climbers and approved by tree-climbers!

Very comfortable structure, bridge attachment point adjustable in length, ventral atttachment point, possibility to install a EN361 chest part and a rigid seat. Every single detail has been studied to fit all the tree-climbers’ needs.

The “Tree Access” solution consists of a sit harness [A], a chest harness [B] and a rigid seat[C].

*Tree Access, Access Chest and Access Swing are supplied separately, together with instructions for assemblying.

Ref.2162.01

Ref.1962.02

Ref.1963

CERTIFICATIONS

DESCRIPTION

1

A

C

A

B

2

POSSIBLE CONFIGURATIONS

1.

2.

3.

Three different configurations are possible:

Use of the sit harness only, for tree-climbing applications where fall arrest function is not required;

Combination of the chest part with the sit harness. This solution adds two fall arrest attachment points (front and back) suitable for the connection of a shock absorbing lanyard or a fall arrest device;

Connection of rigid seat for best comfort in mid-air prolonged suspensions. Possibility to connect the seat on the buckles of the Tree Access harness, or to apply it directly to the ventral ring of any sit harness by means of two connectors.

1

3

2

TREE ACCESS

A_ Sit harness "TREE ACCESS” - Ref.2162.011 Aluminium alloy bridge ring, d.45 x D.69 m, 30 kN

2 Bridge attachment webbing, double webbing layer for best durability,

25mm wide,30 cm long (25 cm version avaiable as spare part). Certified according EN 813

3 Webbings and side buckles for bridge position adjustment, perfect to adjust

the user’s position, also during suspension. 20 mm wide webbings, aluminium alloy buckles

4 Stainless steel connection rings with hexagonal screws

for replacement of the bridge webbing

5 Textile ventral attachment loop, certified according EN 813. Patented structure.

Also used for the connection of Access Chest

6 Aluminium alloy side rings for work positioning, certified according EN 358

7 New connection system between belt and leg-loops:

the high distance between the two connection webbings is studied for improved comfort in the groin area

8 “Speedy Alu” automatic buckles

9 Aluminium alloy belt buckles, fast adjustable and detachable

10 Patented “Sicura” buckles for fastening the “Access Swing”

11 Polyester belt webbings, 44 mm wide

12 Polyester leg-loops webbings, 33 mm wide

13 Leg-loops webbing reinforcement

14 Triple-layer belt padding: comfortable 3D mesh,

robust intermediate foam, additional rigid foam layer on load areas. Large contact area for pressure distribution.

15 Double density leg-loops padding: stiffer on the back for load support,

softer on the groin area for comfort. 3D mesh inside.Large contact area for pressure distribution

16 Rear leg-loops connection webbings, adjustable in length

17 Buckle for “Access Chest” fastening

18 Webbing loops for fastening of

gear-carabiners “Hub” ref.910 (supplied separately)

19 Several rigid gear loops on the belt, 10kg max

20 One gear ring on each leg-loop, 10kg max

21 Webbing loop for “Access Swing” fastening when not in use

3

TREE ACCESS

B_Chest harness "ACCESS CHEST” - Ref.1962.02

22 Fall arrest aluminium alloy rings (front and back)

certified according EN361, suitable for the connection of a shock absorbing lanyard or a fall arrest device;

23 Polyester webbings, 44 mm wide

24 Aluminium alloy buckles, fast adjustable and detachable

25 Screwgate aluminium alloy connector,

fastened with steel pin in order to avoid rotation.To be connected to “Tree Access”

26 Webbing back connection system to “Tree Access”

27 Triple-layer padding: comfortable 3D mesh, robust intermediate

foam, external protective mesh.

28 Webbing system for chest ascender fastening

4

TREE ACCESS

C_ Rigid seat “ACCESS SWING” - Ref.1963

29 Aluminium alloy structure for best stiffness during suspension.

Double layer padding made by foam covered by breathable 3D mesh.

30 Patented “Sicura” buckles conceived to be

connected directly to the buckles on “Tree Access” or “Access Sit”

31 Webbing loops for the connection of the seat to the ventral

attachment ring of any EN 813 harness by means of two connectors (suggested “Nano 23” ref.1189)

32 Aluminium alloy hook for fastening the seat on

the back of “Access Sit”, when not in use

33 Side gear loops, 10kg max

34 Bottom gear loop, 10kg max

TREE ACCESS

Use with “Tree Access”

Use with any EN 813 harness

5

Spare parts for “TREE ACCESS”

Bridge Webbing:- Ref.2164.01 - 25 cm long

- Ref.2164.02 - 30 cm long (standard)

Bridge aluminium ring:- Ref.2046 - d.34 x D.54 mm, 22 kN

- Ref.2046.01 - d.45 x 54 mm, 30 kN (standard)