Transport Trolleys for Sterile Services - Palmedico · 2017. 2. 24. · 6 Closed transport trolley,...
8
Transport Trolleys for Sterile Services Stay flexible - whether open or closed
Transcript of Transport Trolleys for Sterile Services - Palmedico · 2017. 2. 24. · 6 Closed transport trolley,...
Transport Trolleys for Sterile ServicesStay flexible - whether open or closed
2
Clean design
Trolleys for transporting sterile goods are among
the most important components in the sterile
products circuit. The new range of transport trol-
leys from BLANCO feature interchangeable interi-
ors so that you remain flexible and have the ability
to react quickly and easily to altered transport or
storage requirements.
Flexibility without the need for tools!
The new design transport trolleys from BLANCO
allow you to change from angled support brack-
ets to shelves in seconds without tools. Shelves,
manufactured from stainless steel CNS 18/10 or
angled support brackets can be hooked onto the
internal frame and are adjustable with a spacing
of 175 mm. The brackets offer you the flexibility
to store and transport STU containers, heavy load
extensions or sterile product baskets.
The interior equipment can be
removed and interchanged in seconds
– flexibly for changing the equip-
ment from shelves to angled support
brackets and vice versa.Open design with three
height-adjustable one-piece
shelves
Open design with frame
and eight pairs of height-
adjustable angled support
brackets
Open to your needs
Pins are integrated in the trolley walls
(closed trolleys) and in the trolley frame
(open trolley). These are height adjust-
able to provide full flexibility.
Why decide?
Stay flexible with the interchangeable interior layout
3
Closed design with frame and
nine pairs of height-adjustable
angled support brackets
Closed design with two
height-adjustable one-
piece shelves
Why decide?
Stay flexible with the interchangeable interior layout
Shown with accessories
4
Well protected
Four corner guards offer
sufficient protection against
obstacles.
The trolley for all cases
Closed, single-walled transport trolley for storage
and transport of sterile products.
The stable and self-supporting body is made of
stainless steel and the top and back surfaces are
reinforced for maximum durability. The doors are
double-walled and feature noise insulation. The
trolley is suitable for transporting sterile goods
within the hospital or from building to building.
Outstanding hygiene
The body, made of micro-polished stainless steel is easy to
clean both inside and outside. The doors with all-round
silicone seals and a stop bar, help guarantee dust tight closure
and prevent the contamination of the sterile products.
Well sealed
The all-round seals and the
stop bar guarantee dust-tight
closure.
Held in place
The two vertical handles on
each side enable convenient
handling.
Firmly locked
The standard-equipment
2-point lock holds the doors
closed during transport.
Standard:
• Closed single-walled model made of stainless
steel CNS 18/10, material 1.4301
• Two double-walled hinged doors with all-round
seal and stop bar
• Opening angle of doors: 270°
• Two vertical push handles on each side
• Four corner guards
• 2-point door lock
• Four galvanised heavy duty castors, 160 mm
dia. (not antistatic), two with brakes
Transport Trolleys for Sterile Services
Closed design
5
Closed transport trolley with shelvesWith 2 removable, height-adjustable shelves; max. load per shelf 60 kg, max. trolley capacity 120 kg (6 STU)/ 180 kg (9 STU)
Schematic illustration
Description Dim. (W x D x H)Exterior dim. (mm)Interior dim. (mm)
Empty weight(kg)
Item No.
For holding a maximum of 6 STU sterile product 840 x 785 x 1480636 x 616 x 1130
95 543 131
For holding a maximum of 9 STU sterile product 1170 x 785 x 1480 966 x 616 x 1130
118 543 133
Closed transport trolley with angled support bracketsWith 6 or 9 pairs of height-adjustable angled support brackets (incl. 1 or 2 frame(s) for angled support brackets, 2 or 4 connecting profiles and 1 or 2 fixing profiles for frames), max. load per pair of angled support brackets 20 kg, max. trolley capacity 120 kg (6 STU)/ 180 kg (9 STU)
Schematic illustration
Description Dim. (W x D x H)Exterior dim. (mm)Interior dim. (mm)
Empty weight(kg)
Item No.
For holding a maximum of 6 STU sterile product 840 x 785 x 1480636 x 616 x 1130
103 543 132
For holding a maximum of 9 STU sterile product 1170 x 785 x 1480 966 x 616 x 1130
131 543 134
Firmly locked
The optional door locks allow free access and protect
against accidents caused by open doors.
Firmly closed
An ergonomic twist handle in the right-hand door closes
the hinged doors. Also available in a lockable version as an
option.
Transport Trolleys for Sterile Services
Closed design
6
Closed transport trolley, fully welded, with shelvesWith 2 removable, height-adjustable shelves; max. load per shelf 60 kg, max. trolley capacity 120 kg (6 STU)/ 180 kg (9 STU)
Schematic illustration
Description Dim. (W x D x H)Exterior dim. (mm)Interior dim. (mm)
Empty weight(kg)
Item No.
For holding a maximum of 6 STU sterile product 850 x 780 x 1490664 x 634 x 1130
107 543 194
For holding a maximum of 9 STU sterile product 1180 x 780 x 1490 994 x 634 x 1130
132 543 196
Closed transport trolley, fully welded, with angled support bracketsWith 6 or 9 pairs of height-adjustable angled support brackets (incl. 1 or 2 frame(s) for angled support brackets, 2 or 4 connecting profiles for frames), max. load per pair of angled support brackets 60 kg, max. trolley capacity 120 kg (6 STU)/ 180 kg (9 STU)
Schematic illustration
Description Dim. (W x D x H)Exterior dim. (mm)Interior dim. (mm)
Empty weight(kg)
Item No.
For holding a maximum of 6 STU sterile product 850 x 780 x 1490664 x 634 x 1130
113 543 195
For holding a maximum of 9 STU sterile product 1180 x 780 x 1495 994 x 634 x 1130
144 543 197
The trolley for cleaning in washing
systems
The closed and fully welded model is
similar to the standard closed trolley
but is full welded for improved dura-
bility and hygiene. The body is made
of stainless steel CNS 18/10 and the
trolley is suitable for use in washing
machines. It is also suitable for use
within a building or for transport from
one building to another.
Standard:
• Closed fully-welded model made of
stainless steel CNS 18/10, material
1.4301
• Two double-walled hinged doors
with all-round seal and stop bar
• Opening angle of doors: 270°
• Two vertical push handles on each
side
• Four corner guards
• 2-point door lock
• Four galvanised heavy duty castors,
160 mm dia. (not antistatic, not suit-
able for washing systems), two with
brakes. Castors suitable for wash-
ing systems as accessories (ref.
MC0357)
Transport Trolleys for Sterile Services
Closed and fully-welded model
7
Open sterile-products transport trolley with shelvesWith 2 height-adjustable shelves (max. load 60 kg per shelf)
Schematic illustration
Description Dim. (W x D x H)Exterior dim. (mm)
Empty weight(kg)
Item No.
For holding a maximum of 6 STU sterile product (for a maximum of 3 small shelves of 679 x 564 x 30 mm each)
760 x 695 x 1397 38 543 137
For holding a maximum of 9 STU sterile product(for a maximum of 3 large shelves of 1009 x 564 x 30 mm each)
1090 x 695 x 1397 50 543 139
Open sterile-products transport trolley with angled support brackets With 6 or 9 pairs of height-adjustable angled support brackets (incl. 1 or 2 frame(s) for angled support brackets) (max. load 20 kg per pair of angled support brackets)
Schematic illustration
Description Dim. (W x D x H)Exterior dim. (mm)
Empty weight(kg)
Item No.
For holding a maximum of 6 STU sterile product 760 x 695 x 1397 37 543 138
For holding a maximum of 9 STU sterile product 1090 x 695 x 1397 51 543 140
The trolley for use on wards
The open transport trolleys are intended for tem-
porary storage of sterile products on the ward or
within a department. Thanks to the four swivel cas-
tors, the trolleys are extremely easy to manoeuvre.
Integrated wall guards protect against damage to
the trolley or other surfaces and the square section
stainless steel frame is very easy to clean.
Standard:
• Open, single-walled, 25 x 25 mm square-tube
frame design made of stainless steel CNS
18/10, material 1.4301
• Four antistatic swivel castors (125 mm dia.)
with round wall guards, two with brakes
Transport Trolleys for Sterile Services
Closed and fully-welded model
Transport Trolleys for Sterile Services
Open model
Description Dim. (W x D x H) (mm) Item No.
1 Small shelf, single-walled, for entire trolley width, stainless steel CNS 18/10 679 x 564 x 30 353 471
Closed shelf, stainless steel CNS 18/10 308 x 559 x 30 600 778
Perforated shelf, stainless steel CNS 18/10 308 x 559 x 30 600 777
2 Support angles 60 x 590 x 50 542 889
3 Frame for support angles 25 x 618 x 1147 353 479
Connecting profile for frame (2 pieces) 353 513
Fixing profile for frame 353 503
– Heavy-load extension: for hooking into pins for STU inner frame, STU shelf or STU sterile product transport trolley
292 x 600 542 529
– 4 swivel castors, stainless steel CNS 18/10, suitable for washing systems, 160 mm dia.,not antistatic
MC0357
– All-round bumper rail MC0353
– 4 corner guards with 4 middle buffers MC0351
– Door lock, 255° MC0355
4 Card holder 215 x 5 x 130 353 846
5 Lead-sealing device 542 966
– Lock MC0356
– Ground cable MC0350
_ Steering castors on request
We will be happy to discuss your special requests. m
1120
2/01
-11
/ HG
G
SA
P 1
93 2
84
S
ubje
ct t
o ch
ange
s. C
olou
rs m
ay v
ary.
Accessories
1 2 3 4 5
Your medical technology system supplier.
Because quality is the best instrument.
BLANCO Professional GmbH + Co KG
MEDICAL
P. O. Box 13 10
75033 Oberderdingen
Germany
Phone +49 7045 44-81900
Fax +49 7045 44-81135
www.blanco-professional.com
Your Specialist Dealer
1 2 3 4 5
