TRANS-LUX PTS-9000 SERIES STRETCHERS - Bryton Corp · 2018. 3. 14. · Maintenance Parts Guide...

11
Maintenance Parts Guide TRANS-LUX PTS-9000 SERIES STRETCHERS Read and understand all of the instructions and safety information in this manual before operating this product. MAN_0003 2018 © 2018 Bryton Corporation TRANS-LUX STRETCHERS Maintenance - Parts

Transcript of TRANS-LUX PTS-9000 SERIES STRETCHERS - Bryton Corp · 2018. 3. 14. · Maintenance Parts Guide...

  • Maintenance Parts Guide TRANS-LUX PTS-9000 SERIES STRETCHERS

    Read and understand all of the instructions and safetyinformation in this manual before operating this product.

    MAN_0003 2018© 2018 Bryton Corporation

    TRANS-LUX STRETCHERS Maintenance - Parts

  • 2 3

    Maintenance Parts Guide

    8-1 Caster & Fifth Wheel Assembly

    Item Part No. Part Name Qty.BF 350-05-99 Base Frame 1B2 350-03-02 Skate Board 1B6 350-03-28 Bushing 2B7 350-03-27 Bushing 2B8 350-03-39 Ground Chain 1L 350-03-12 Lever 4P 350-02-46 Hole Plug 4Q 350-03-50 Hex Screw 4QQ 350-03-56 Hex Head, Cap Screw 6QT 350-02-56 Thin Head, Cap Screw 2R6 350-05-21 Hex Head, Cap Screw 1R11 350-05-26 5" Wheel 1RR 350-03-38 8" Wheel Assy 4

    TRANS-LUX 9600TRAUMA TRANS-LUX 9400

    EMERGENCY

    TRANS-LUX 9200 TRANSPORT

    TABLE OF CONTENTS

    8-1 Caster & Fifth Wheel Assembly 38-2 Brake Rod Assembly 48-3 Side Control Litter Up/Down Assembly 58-4 Hydraulic Assembly (PTS-9200, PTS-9400, and PTS-9600) 6-78-5 Electric Up/Down Litter Control Assembly (PTS-9800 Electric Model) 8-98-6 Electric Up/Down Litter Control Assembly (PTS-9800 Electric Model) 10-118-7 Litter Assembly with Knee Gatch 12-138-8 Litter Assembly 14-15Preventative Maintenance Record 16-17

    See DETAIL A

    See DETAIL B Fig 8-1

    R11

    R2

    RF

    R8R7

    R6B6

    DETAIL A

    Q

    RR

    QQ

    QT

    P

    L

    RR

    Q

    P

    L

    DETAIL B

    QQ

    QQ

    TRANS-LUX 9800 ELECTRIC

  • 4 5

    Maintenance Parts Guide

    Item Part No. Part Name Qty.B7 350-03-27 Bushing 2I 350-03-69 Brake Pedal 2II 350-03-49 Slotted Spring Pin 2J 350-03-10 Brake Bar A 2K 350-03-11 Brake Bar B 2L 350-03-12 Lever 4M 350-03-13 Control Arm 2M1 350-02-41 Screw, Control Arm Set 2M2 350-03-91 Slotted Spring Pin 2R1 350-05-16 Support Bracket 1T 350-03-35 Brake Rod 1T1 Open Hole 2T2 350-03-16 Sleeve 2T3 350-03-68 Washer, PE 2

    Item Part No. Part Name Qty.B6 350-03-28 Bushing, self lubricating 2BF 350-05-99 Base Frame 1D 350-03-04 Piston Link Welding 1D1 350-03-51 Hex hd, Cap Screw 1D2 350-03-52 Hex hd, Cap Screw 1E 350-03-05 Up Pedal Rod 1F 350-03-06 Mounting Bracket 1F1 350-03-21 Bushing, self lubricating 2G 350-03-07 Pedal Shaft 1G1 350-03-36 Clasper 2H 350-03-34 Fwd/Aft Down Pedal Rod 2H2 350-03-42 Fwd/Aft Down Pedal 2H1 350-03-46 Up Pedal 2K 350-03-75 Bracket 1L 350-03-76 Bracket 1M 350-03-77 Support Plate 1N5 350-03-57 Hex hd, Cap Screw 1N6 350-03-58 Hex hd, Cap Screw 1R 350-03-37 Slotting 2V 350-03-22 Spring 1W1 350-03-31 Release Rod A 1W2 350-03-32 Release Rod b 1Z 350-03-70 Bracket 1

    8-3 Side Control Litter Up/Down Assembly8-2 Brake Rod Assembly

    T

    I

    M2

    II

    M

    Support Weldment

    Support Weldment

    Support Weldment

    B7Fig 8-2

    J

    L

    K

    T2

    Base Frame

    L

    R1

    M1

    T1

    W1

    D

    X

    D1

    D2

    N1

    Fig 8-3

    H1

    G

    F

    B6

    S

    BF

    BF

    Z

    F1

    R BF

    E

    BF

    W2L

    L2

    Y

    N2

    N5

    H

    N6

  • 6 7

    Maintenance Parts Guide

    8-4 Hydraulic Assembly (PTS-9200-9400-9600 Only)

    Item Part No. Part Name Qty.A 350-02-01 Litter Support Bracket 2B 350-02-02 Lock support 2D 350-02-04 Cylinder cover 2E 350-02-05 Base hood 1F 350-02-06 Support plate 2G 350-02-07 Hydraulic pump 2G1 350-02-10 Internal wrenching screw 8H 350-02-08 Internal wrenching screw 2H2 223+06-25 Internal wrenching screw 4H4 212+06-15 Pan head, cap screw 4L 350-01-25 The Movable IV Pole 1L1 350-01-27 I.V, Pole rest 2M 350-02-11 Shape support 2U 350-02-12 Shape support 2

    Fi g 8- 4

    E

    M

    U

    G

    A

    B

    H

    U

    M

    D

    D

    G1

    G

    LL1

    B

    H1

    F

    H2

    H4

    H4

    H2

  • 8 9

    Maintenance Parts Guide

    8-5 Electric Up/Down Litter Control Assembly (Electric Models Only)

    Item Part No. Part Name Qty.A 480-02-01 Litter support bracket (head end) 1B 480-02-02 Litter support bracket (foot end) 1B8 480-03-39 Ground Chain 1C 480-02-06 Support plate 2D 480-02-05 Base hood 1E 480-02-16 Actuator 2E1 480-02-28 Screw for Actuator to hat section 12H 480-02-09 Screw 8K 480-01-25 The Movable IV Pole 1K1 480-01-27 The Plastic Anchor for The IV Pole 2M 480-02-18 hat section 2M1 480-02-29 Screw for hat section to Base frame 16

    Fig 8-5

    E

    D

    E

    E1

    CA

    HOpen Hole

    Open Hole

    BH

    B8

    K

    K1

    M

    M1

    E1

  • 10 11

    Maintenance Parts Guide

    8-6 Electric Up/Down Litter Control Assembly (Electric Models Only)

    Item Part No. Part Name Qty.A1 350-01-02 Mattress 1B1 350-01-04 The Frame of The Backrest Section 1B2 350-01-05 Handle cover 2C2 350-01-07 The Frame of Thigh Section 1C3 350-01-08 The Frame of The Shank Section 1D1 350-01-10 The Frame of The Backrest Section 1E1 350-01-12 The Board of The Abdominal Section 1E2 350-01-13 The Board of The Thigh Section 1E3 350-01-14 The Board of The Shank Section 1F 350-01-15 The snubber for The backrest 2F1 350-01-16 The snubber for The Knee Crooked 2F2 350-02-16 The Adjusted Bar for The shank 2

    GG 350-01-18 The Handle control for The Backrest Board (F) 1

    G1 350-01-19 The Handle control for The Knee Crooked (F1) 1

    J 350-01-24 The Permancnt IV Pole 1J1 350-01-26 The Plastic Anchor for The IV Pole 1K 350-01-22 Folding The Push Bar 2K1 350-01-23 The Plastic Anchor for The folding push bar 2M 350-01-20 Foot Auxiliary Push Bar 1MA 350-01-28 The Instrument Tray Assembly 1

    M1 350-01-21 Foot Auxiliary Push Bar [Instrument Tray use] 1

    M2 350-01-30 The Frame of The Instrument 1M3 350-01-31 The Magnetic Strip 2M4 350-01-32 The Steel Slice 2M5 350-01-33 The Swing Bolster 2M6 350-01-29 The Translucent 1NA 350-01-34 The X-Ray Cassette Holder Assembly 1N1 350-01-35 The X-Ray Frame 1N2 350-01-36 The X-Ray cassette Tray 1N3 350-01-37 The Cape of The Frame 4N4 350-01-38 The Screw for Fixing The Plastic Toggle 4N5 350-01-39 The Plastic Toggle 4N6 350-01-40 The Screws for Fixed 2OA 350-01-41 The Oxygen Tank Holder 1P1 350-01-42 The Rectangle Plastic Cover 4P 350-01-43 The Round Plastic Cover 2QA 350-01-70 The case history Tray Assembly 1R 350-01-44 The Protected Bumper Assembly 4S 350-01-46 The Plastic Anchor for The Siderails 2T 350-01-47 The Collapsible Siderails 2U 350-01-49 The Protective Strip 2U2 350-02-77 CE plate 1U3 350-02-79 bar code 1V 350-01-75 Electronic health scale Assembly 1Z 350-04-95 Litter Base Frame 1

    D1

    E1

    Fig 8-6

    E2

    E3

    Z

    A1

    S

    B1

    M1

    M2

    M3

    M4

    MA

    M6M5

    F2

    C3

    C2

    F1

    NOTE: MA, OA & QA are Optional Accessories

    T

    M1

    Q3

    Q2

    Q1

    QA

    B2

    F

    GG

    N2

    N1

    N3

    N5

    N6

    N4

    R

    G1

    H

    P1

    Z

    UH

    J1

    P1

    M

    P

    V

    H2

    H2

    P

    J

    U2

    U3

    OA

  • 12 13

    Maintenance Parts Guide

    8-7 Litter Assembly with Knee Gatch

    Item Part No. Part Name Qty.A 350-01-01 Mattress 1B 350-01-09 The Board of The Backrest Section 1B1 350-01-03 The frame of The Backrest Section 1B2 350-01-05 Handle cover 2C2 350-01-07 The frame of thigh section 1C3 350-01-08 The frame of the shank section 1E1 350-01-12 The Board of the abdominal section 1E2 350-01-13 The Board of The Thigh Section 1E3 350-01-14 The Board of The Shank Section 1F 350-01-15 The snubber for The backrest 2F1 350-01-16 The snubber for The Knee Crooked 2G 350-01-17 The Adjusted Bar for The Backrest Board 1H 350-02-08 Internal wrenching screw 2H2 223+06-25 Internal wrenching screw 4H4 212+06-15 Pan head, cap screw 4J 350-01-24 The Permanent IV Pole 1J1 350-01-26 The Plastic Anchor for The IV Pole 1

    M 350-01-20 Foot Auxiliary Push Bar [no Instrument Tray use] 1

    MA 350-01-28 The Instrument Tray Assembly 1

    M1 350-01-21 Foot Auxiliary Push Bar [Instrument Tray use] 1

    M2 350-01-30 The Frame of The Instrument 1M3 350-01-31 The Magnetic Strip 2M4 350-01-32 The Steel Slice 2M5 350-01-33 The Swing Bolster 2M6 350-01-29 The Translucent 1OA 350-01-41 The Oxygen Tank Holder 1P 350-01-22 Folding The Push Bar 2P1 350-01-23 The Plastic Anchor for The folding push bar 2P2 350-01-42 The Rectangle Plastic Cover 2P3 350-01-43 The Round Plastic Cover 2R 350-01-44g The Protected Bumpers (color ; gray) 4S 350-01-46 The Anchor for The Siderails 2T1 350-03-47 The Collapsible Siderail [LH] 1T2 350-03-48 The Collapsible Siderail [RH] 1T5 223+08-35 Internal wrenching screw 20V 350-01-50 The Crank for E200i (for Knee Crooked ) 1WA 350-01-52 The Board of The Head Section 1Z 350-04-93 Litter Base Frame 1

    B1

    B

    R

    Fig 8-7

    AG

    F

    WA

    NOTE: MA, OA & WA are Optional Accessories

    HZ1

    T2

    T1

    M

    M1

    M2

    M3

    M 4

    MA

    M6M5

    S

    T3

    OA

    J1P1

    P

    J

    H2

    B2

    T5

    E1

    E2

    E3

    C2

    C3

    Z

    F1

    Z2

    HH2

    P2V

    P3

  • 14 15

    Maintenance Parts Guide

    8-8 Litter Assembly

    Item Part No. Part Name Qty.A 350-01-01 Mattress 1B 350-01-09 The Board of The Backrest Section 1B1 350-01-03 The frame of The Backrest Section 1B2 350-01-05 Handle cover 2E 350-01-11 The Board of The Abdominal Section 1F 350-01-15 The snubber for The backrest 2G 350-01-17 The Adjusted Bar for The Backrest Board 1H 223+10-35 Internal wrenching screw (AFT) 1H1 226+10-35 Hex head, cap screw (FWD) 1H2 223+06-25 Internal wrenching screw 4H4 212+06-15 Pan head, cap screw 4J 350-01-24 The Permanent IV Pole 1J1 350-01-26 The Plastic Anchor for The IV Pole 1

    M 350-01-20 Foot Auxiliary Push Bar [no Instrument Tray use] 1

    MA 350-01-28 The Instrument Tray Assembly 1OA 350-01-41 The Oxygen Tank Holder 1P 350-01-22 Folding The Push Bar 2P1 350-01-23 The Plastic Anchor for The folding push bar 2P2 350-01-42 The Rectangle Plastic Cover 2P3 350-01-43 The Round Plastic Cover 2

    R 350-01-44r The Protected Bumper Assembly (color : red) 4

    S 350-01-46 The Anchor for The Siderails 2T1 350-03-47 The Collapsible Siderail [LH] 1T2 350-03-48 The Collapsible Siderail [RH] 1T3 350-03-49L The Bracket for Siderail 5T4 350-03-49R The Bracket for Siderail 5T5 223+08-35 Internal wrenching screw 20U2 350-02-79 Bar code 1U3 350-02-77 CE plate 1WA 350-01-52 The Board of The Head Section,Assembly 1Z 350-03-92 Litter Base Frame 1Z1 350-01-77 L rack 1Z2 350-01-78 U rack 1ZA 350-01-79 M rack (Optional) 1

    B1

    B

    R

    P3

    Fig 8-8

    E

    H1

    Z

    AG

    F

    WA

    NOTE: MA, OA, WA & ZA are Optional Accessories

    H Z1

    Z2

    U2

    U3

    T2

    T1

    M

    M1

    M2

    M3

    M4

    MA

    M6M5

    CR

    S

    T3

    OA

    J1P1

    ZA

    P

    J

    P2

    H2

    H2

    B2

    T5

  • 16 17

    Maintenance Parts Guide

    Preventative Maintenance RecordPreventative Maintenance Record

    Personnel Trained Daily Operation Safety Instruction Cleaning Procedures

    Personnel Trained Daily Operation Safety Instruction Cleaning Procedures

    Date of Weekly Inspection Date of Monthly Inspection Date of Semi-Annual Testing

    Date of Weekly Inspection Date of Monthly Inspection Date of Semi-Annual Testing

    For your convenience, here is a simple chart to use to note which personnel have been trained to safely use and maintain the Trans-Lux Stretcher.

    For your convenience, here is a simple chart to use to note which personnel have been trained to safely use and maintain the Trans-Lux Stretcher.

  • 18 19

    Maintenance Parts Guide

    Notes______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

    Notes______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

  • Warranty Information

    All products manufactured by Bryton Corp will carry a limited lifetime guarantee against product craftsmanship, one year labor and two year parts guarantee. The factory will service all units without cost to the buyer for one year from shipment. After the one year period, replacement of a defective part (labor) will be at buyer’s expense. We will exchange all defective parts at no cost to the buyer for a period of two years from shipment. All defective parts must be returned within 30 days to ensure proper credit. An RMA from Bryton Corp must be obtained prior to items return.

    To place an order, contact our customer service department at 800-567-9500 or 317-334-8700 or by email at [email protected]

    www.brytoncorp.com • 1-800-567-9500

    © 2

    018

    Bry

    ton

    Cor

    pora

    tion