Training Program PATRONS on Short Term Training …ghrce.raisoni.net/sttp/all etrx.pdf · Prof.K....
Transcript of Training Program PATRONS on Short Term Training …ghrce.raisoni.net/sttp/all etrx.pdf · Prof.K....
-
Short Term Training Program
on
Advanced Controller & Its Application to Engineering
System
(01
st to 05
th June 2015)
Under
TEQIP-II
Organized By
Department of Electronics Engineering
G. H. Raisoni College of Engineering, Nagpur
G. H. Raisoni College of Engineering, Nagpur (An Autonomous Institution under UGC Act 1956 &
Affiliated to Rashtrasant Tukadoji Maharaj Nagpur University, Nagpur)
CRPF Gate No.3, Digdoh Hills, Hingana Road, Nagpur-16.
-
List of Resource Persons for Short Term Training Program[STTP] is given as;
Sr.Nos. Name of Resource Persons Institute Details
1 Dr.D.V.Padole Professor,Electronics Dept. G.H.Raisoni College of Engg
2 Prof.S.D.Giripunje Professor,Electronics Dept. G.H.Raisoni College of Engg
3 Prof.S.V.Bhalerao Professor,Electronics Dept. G.H.Raisoni College of Engg
4 Prof.P.M.Ghutke Professor,Electronics Dept. G.H.Raisoni College of Engg
5 Prof.B.B.Sayankar Professor,Electronics Dept. G.H.Raisoni College of Engg
6 Prof.W.V.Patil Professor,Electronics Dept. G.H.Raisoni College of Engg
7 Prof.P.H.Rangaree Professor,Electronics Dept. G.H.Raisoni College of Engg
8 Prof.S.N.Joshi Professor,Electronics Dept. G.H.Raisoni College of Engg
9 Prof.K.N.Dekate Professor,Electronics Dept. G.H.Raisoni College of Engg
10 Prof.N.Y.Wavahare Professor,Electronics Dept. G.H.Raisoni College of Engg
11 Prof. Ravi Tiwari Professor,Electronics Dept. G.H.Raisoni College of Engg
12 Prof. R. S. Agrwal Professor,Electronics Dept. G.H.Raisoni College of Engg
List of Committee Members is given as;
Sr.Nos. Name of Resource Persons Responsibility
1 Prof. S.V.Bhalerao Coordinator
2 Prof. R. Tiwari Co- Coordinator
3 Prof. N.Y.Wavahare Catering , STTP kit
4 Prof. R.S. Agrwal Catering
5 Prof. S. N. Joshi
Inauguration
6 Prof.T. G. Deotale
Registration
7 Prof. M. M. Pathan Documentation (Certificate, Banners, TAG)
-
Date: 01/ 06/ 2015 Technical
Session
Time Experts / Resource
Persons
STTP Session Contents
9:30 AM-
10:00 AM
Inauguration of STTP
Session-I:
10:00 AM-
11:00 AM
Dr.D.V.Padole Expert Lecture on Recent Trend in
Microcontroller & Microprocessor
11:00 AM-
11:15 AM
High Tea break
Session-
II:
11:15 AM-
1:00 PM
Prof.S.V.Bhalerao
Prof.R.Tiwari Module-I: Arduino Flatform 1] Introduction to open-source Arduino Software
(IDE) Design software platform
2] Exploring the Arduino Board and the IDE.
3] Working with Functions, Libraries & other in-
build Utilities.
1:00 PM
2:00 PM
Lunch Break
Session-
III:
2:00 PM
5:00 PM
Prof.S.V.Bhalerao
Prof.R.Tiwari Module-II: Arduino Basic Programming 1)Perform Arduino uno serial programming (like
multiplication of numbers, binary conversion ).
2)Perform interfacing of LED patterns, Seven
segment, LCD JXD 16x2, Electronic Die with
Arduino uno on breadboard.
Date: 02/ 03/ 2015
Session-I:
10:00 AM-
11:00 AM
Prof.S.V.Bhalerao
Prof.R.Tiwari Module-III: Arduino Advanced Programming I] Perform sensor interfacing (like PIR, pressure,
dry electrode , TMP35, gas sensor , Ultrasonic
sensor)with Arduino Atmega & display on LCD. 2] Interfacing of Graphics Display (120x64) and
generate different patterns On it.
11:00 AM-
11:15 AM
High Tea break
Session-
II:
11:15 AM-
1:00 PM
Prof.S.V.Bhalerao
Prof.R.Tiwari Module-IV: PROCESSING SOFTWARE I] Introduction of PROCESSING Software
Platform.
II] Perform Different sensor Interfacing and
graphical parametric analysis on Processing
Software using Arduino Atmega.
1:00 PM 2:00 PM
Lunch Break
Session-
III:
2:00 PM
5:00 PM
Prof.S.V.Bhalerao
Prof.R.Tiwari
Case Study I: Demonstrate Brain Sensor[EEG]
interface with Arduino IDE Platform Case Study II: Interface and implement of
Ultrasonic sensor for distance detection.
Case StudyIII: Interface Bluetooth to
communicate mobile GUI Interface
-
Case Study IV: Interface Arduino Atmega with
Relay Board.
Date: 03/ 06/ 2015 Session-I:
10:00 AM-
11:00 AM
Prof.P.H.Rangaree Introduction to DSP based system:
1] Expert Lecture on DSP Processor
2]Introduction, Basic examples on different
operations of DSP,Design of digital filters
11:00 AM-
11:15 AM
High Tea break
Session-
II:
11:15 AM-
1:00 PM
Prof.N.Wyavahare
Prof.R.S.Agrwal Introduction to TI MSP-430 Micro-processor:
1] Introduction to Code Composer Studio V 4.0
Software (IDE) Design platform
2] Exploring the TI MSP-430 and the IDE.
3] Working with Functions, Libraries & other in-
build Utilities.
1:00 PM
2:00 PM
Lunch Break
Session-
III:
2:00 PM
3:00 PM
Prof.N.Wyavahare
Prof.R.S.Agrwal Module-V: Basic Programming:
1] Perform Basic assembly & C -Programming as Arithmetics & Logical operation, timer, interrupt,
ADC & DAC operation.
2] Perform interfacing of LED patterns, sensors
with ADC and joystick Hardware.
3] Perform interfacing of Graphical LCD. 03:00 PM-
03:15 PM
High Tea break
Session-
IV:
3:15 PM
5:00 PM
Prof.N.Wyavahare
Prof.R.S.Agrwal 1] Case Study I:Assignment-I
2] Case Study II: Assignment-II
Date: 04/ 06/ 2015
Session-I:
10:00 AM-
11:00 AM
Prof. K. N. Dekate
Prof.P.M.Ghutke Module-VI: Intel Galileo Gen 2 Development Board
1] Introduction to open-source Intel Software
(IDE) Design software platform
2] Exploring the Galileo Board and the IDE.
3] Working with Functions, Libraries & other in-
build Utilities.
11:00 AM-
11:15 AM
High Tea break
Session-
II:
11:15AM
1:00 PM
Prof. K. N. Dekate
Prof.P.M.Ghutke Module-VII: Arduino Basic Programming 1) Perform Galileo Gen 2 serial programming (like
multiplication of numbers, binary conversion ).
2) Perform interfacing of LED patterns, Seven
segment, LCD JXD 16x2, Electronic Die with
Galileo Gen 2 on breadboard.
1:00PM
2:00PM
Lunch Break
-
Session-
III:
2:00 PM
5:00 PM
Prof. K. N. Dekate
Prof.P.M.Ghutke Module-VIII: Galileo Board Advanced Programming
I] Perform sensor interfacing (like PIR, pressure,
dry electrode , TMP35, gas sensor , Ultrasonic
sensor)with Galileo & display on LCD. 2] Interfacing of Graphics Display (120x64) and
generate different patterns On it.
Date: 05/ 06/ 2015 Session-I:
10:00 AM-
11:00 AM
Prof.S.V.Bhalerao
Prof.R.Tiwari Module-IX: Advanced Software Interface:
Case Study -I: Interface Arduino UNO board
with MATLAB & Display Parametric
graphical Analysis on it.
Case Study -II: Interface Intel Galileo Gen 2 Development Board with Processing Software.
11:00 AM-
11:15 AM
High Tea break
Session-
II:
11:15 AM
1:00 AM
Prof.S.V.Bhalerao
Prof.R.Tiwari Case Study -I: Application development
session for participants
1:00 PM
2:00 PM
Lunch Break
Session-
III:
2:00 PM
4:00 PM
Prof.S.V.Bhalerao
Prof.R.Tiwari Case Study -II: Assignment III
4:00 PM-
5:00 PM
Prof.S.N.Joshi
Prof.T.G.Deotale
Valedictory Function
-
The details of schedule with technical sessions are given below.
Date:01/06/2015 Technical
Session
Time Experts / Resource
Persons
Session Contents
Session-I:
10:00AM-
10:30AM
Dr.D.V.Padole Expert Lecture on Arduino uno
Development board (ATMEGA 328).
10:30 AM-
10:45 AM
Practical setup for next session
Session-II:
10:45 AM- 1:00
PM
Prof.S.V.Bhalerao
Mr.Abhijeet Bhagat
1)Arduino uno programming and use of
serial communication port (like
multiplication of numbers, binary
conversion ).
2)Arduino uno with breadboard and LEDs
(making some practical like LED glow with
pattern).
3)Electronic Die using arduino uno
4)Interfacing of seven segment display with
arduino uno. 1:00PM
2:00PM
Lunch Break
Session-
III:
2:00PM-3.50PM Prof.S.V.Bhalerao
Mr.Abhijeet Bhagat
5) interfacing of 16x2 lcd module with
arduino uno.
6)Showing alphanumeric message on
16X2 LCD.
7) Interfacing of Graphics Display
(120x64) and generate different patterns
On it.
8) Interfacing of TMP35, gas sensor
with arduino uno and output from 16X2
LCD.
3:50PM-4:00PM Break
Session-IV 4:00PM-5:00PM Prof.S.V.Bhalerao
Mr.Abhijeet Bhagat
Case Study 1: Interface and implement
of Ultrasonic sensor for distance
detection
Case Study 2: Interface stepper motor to
control mechanical movement in robot
Case Study 3: Interface obstacle sensor ,
IR sensor with arduino uno and
Implementation in applications.
-
5:00PM-5:30PM Valedictory Function
Dr. P.R.Bajaj Dr.S.S.Dorle Prof.S.V.Bhalerao
Director HOD,ETRX Co-ordinator
-
Dear Sir/ Madam
With great pleasure we would like to inform you that,
STTP under TEQIP-II on Interdisciplinary Approach to Various Applications in
Lab view from 25th May 2015 to 29th May 2015 is going to be organized by Department
of Electronics Engineering, G. H. Raisoni College of Engineering, Nagpur.
THEME:
Advance technique may in include Labview and its application for the
design in virtually without doing actual exhaustive coding like c-Programming.
By the use of Labview all engineering aspect we can design. About Micro
controller base communication application which gives interconnections within
the user generated wireless sensor network. Use of advance controller's board
gives better connectivity for user applications. For the testing and simulation of
network modules you can get flexibility level with use of NS-II programming. All
these can base on advance controller design like MSP430 to achieve
comprehensive system design environment all need to interconnects through c-
base programming, generation of hex file and specific level of programming
using universal burner through which you can program language, built-in
engineering-specific libraries of software functions and hardware interfaces and
data analysis, visualization, and sharing features by using Embedded Wireless
Communication & Application.
The aim is to promote research and developmental activities.
This STTP would help to gain hands on experience with on tools by providing a
vision to trade ideas with care annoying technical sessions and appropriate laboratory
session for all the applicants.
Registration Process:
Last date of registration : 23rd May 2015
Workshop date : 25th - 29th May 2015
Faculty from Academic Institutions : Rs. 2000/-
Industry personnel : Rs. 2500/-
Payment of fees should be made through local pay order or demand draft drawn in favor of
The Director, G. H. Raisoni College of Engineering, Nagpur, payable at Nagpur.
Further, we sincerely request you to kindly give wide publicity to the event among
your colleagues and motivate them to attend the workshop. The information brochure and
registration form is attached herewith.
We look forward for your gracious presence.
Thanking you,
Yours sincerely.
-
Schedule for Short Term Training Program on
Interdisciplinary Approach to Various Applications in Lab view Under
TEQIP - II
25th May to 29th May 2015
Day 1 Day 2 Day 3 Day 4 Day 5
Introduction to
Graphical Programming
(10:30 to 11:30 am)
Introduction to NI myRIO
(10:30AM to 11:30AM)
Guest lecture on
Wireless Communication
with Advance topics
(10:30AM to 11:30AM)
Guest Lecture on
Embedded System &
Advanced Topic
(10:30AM to 11:30AM)
Guest lecture on
NS-II software Platform.
(10:30AM to 11:30AM)
Tea Break
(11:30AM to 11:45AM)
HandsOn training on NI
LabVIEW
(11:45AM to 2:30PM )
Demo on NI myRIO
(Real Time & FPGA)
(11:45AM to 2:30PM )
Lecture on
Wireless Sensor &
Application
(11:45AM to 2:30PM )
Introduction to
Advanced Controller &
Application
(11:45AM to 2:30PM )
Introduction to
Advanced Topic & Open
ended Project
(11:45AM to 2:30PM )
Lunch Break
(2:30PM to 3:15PM)
HandsOn training on NI
LabVIEW
(3:15PM to 4:30PM)
Introduction & Demo on
NI USRP
(3:15PM to 4:30PM)
Hands on Practice on
Open ended Project on
Wireless Communication
(3:15PM to 4:30PM)
Hands on Practice on
Controller Boards
(3:15PM to 4:30PM)
Valedictory Program
(3:15PM to 4:30PM)
Questions and Answer Session
(4:30PM to 5:00PM)
Feedback Session
(4:30PM to 4:45PM)
By ARAV Technologies & Department of Electronics Engineering
-
Short Term Training Program on
Free/Open Source Software Under
TEQIP - II
01st 05
th June 2015
REGISTRATION FORM
Full Name: _________________________________
Designation________________________________
Organization:_______________________________
Affiliation & Address:
__________________________________________
__________________________________________
Category: Industry / Faculty / Student
Phone:______________ FAX:__________________
Mobile: ___________________________________
Email:_____________________________________
Amount : Rs:_________
Please find enclosed Cheque/ Demand Draft:
No.:_________________Dated: ________________
Drawn in favor of Director, GHRCE, Nagpur
Bank________________________________________
Accommodation Required: YES / NO
Date- Signature of the applicant
The applicant will be permitted to attend the program, if
selected.
Signature & Seal of Head of Organization
(Xerox additional Copies of this form, if needed)
PATRONS: Hon. Shri Sunil Raisoni, Chairman RGI
Hon. Smt. Shobha Raisoni, MD, RGI
RESEARCH ADVISORY COMMITTEE:
Dr. P. R. Bajaj, Director
Dr. P. S. Deshpande, Chair Nagpur ACM Chapter
Dr. P. B. Nagarnaik, Deputy Director
Dr. A. Y. Deshmukh, Deputy Director
Dr. S. S. Dorle, Training Coordinator
Dr. U. S. Wankhade, Dean R&D
Dr. S. S. Salankar, Dean Students
Prof. A. Thomas, Dean PG
Prof. K. D. Joshi, Dean Industry Relations
HEAD OF DEPARTMENT:
Dr. L.G. Malik
Cordinator:
Prof. S.U Nimbhorkar, Assistant Professor
9881713143
Co-cordinator: ---
--
--
Workshop Time: 10.00 am to 5.00 pm
ADDRESS FOR CORRESPONDENCE:
Department of Computer Science & Engg.
G.H. Raisoni College of Engineering
Digdoh Hill, Hingna Road, Nagpur- 16
Tel. 07104-235220 / 235390/ 236383
Fax: 07104-232560
Short Term Training Program on
Free/Open Source Software
1st Juneto 5
th June 2015
Under
TEQIP - II
01st 05
th June 2015
Organized by
Department of Computer Science &
Engineering
In Association with
ACM Nagpur Chapter GHR Labs & Research Center
G. H. Raisoni College of Engineering, Nagpur (An Autonomous Institute under UGC Act 1956)
CRPF Gate No.3, Digdoh Hills,
Hingna Road, Nagpur- 16
http://ghrce.raisoni.net/
Important Dates Last Date of Registration: 25 May 2015
Notification of Acceptance by E-mail: 28th
May 2015
-
VISION:
To achieve excellent standards of quality education by keeping
pace with rapidly changing technologies and to create technical
manpower of global standards with capabilities of accepting
new challenges.
OUR INSTITUTE:
G.H. Raisoni College of Engineering Nagpur (GHRCE) is the
flagship institute of Raisoni Group of Institutions (RGI). It is a
premier research institute in Central India which has set many
benchmarks in very short span of a decade. It is conferred with
Autonomous Status under UGC Act 1956. It is accredited by
NAAC with A grade. It has received NBA Accreditation &
Reaccreditations for upper span of 5 years for most of courses.
It has Received World Bank Assistance under TEQIP-I Project
and TEQIP-II Project. The Academics is backed up with 7 UG,
14 PG and MBA, MCA programmes along with 7 doctoral
programmes. It has hosted series of IEEE International
Conferences (ICETET) in India and Abroad. Institute has
started International Journal on Emerging Trends in
Engineering & Technology (IJETET). GHRCE has been
identified as member of National Knowledge Functional Hub
(NKFH)-a joint initiative of Higher Education of FICCI.
DEPARTMENT:
Computer Science & Engineering (CSE) Computer science is
the study of the theoretical foundations of information and
computation and of practical techniques for their
implementation and application in computer systems.
Computer Engineers invent algorithmic processes that create,
describe, and transform information and formulate suitable
abstractions to model complex systems. Computer science has
many sub-fields; some, such as computational complexity
theory, study the properties of computational problems, while
others, such as computer graphics, emphasize the computation
of specific results.
THEME:
Free/Open Source Software (FOSS) is radically transforming
how software is being developed by different communities in
diverse disciplines. FOSS is amenable to technological
advances, socio-technical innovations, and systematic empirical
studies that can emerge from research in the Computer Science
community and beyond. We seek to articulate both multi-
disciplinary and inter-disciplinary perspectives on how and
why FOSS has become such a source of technology-centered
global transformation and what the future may hold. We need
to identify key research problems and experimental studies
going forward, along with the requisite research infrastructure
and shared data repositories needed to support this research.
We also need to identify future roles that Computer Science can
play in fostering, sustaining, and expanding the ongoing
development of FOSS as a realm of technology development
and use, as an engine of innovation in other scientific and
cultural disciplines, and as a socio-technical movement that has
Computer Science at its core.
CONTENTS:
Day 1:Open Source Software : Introduction to Open
source, Introduction to Ubuntu ,Installation, Open
source software for numerical computation
Day 2: Mathematical tool: Downloading and
Installation of Scilab, Electronic design automation
(EDA)tool, Downloading and Installation of
OSCAD
Day 3: Network Security tools: wire shark ,Nmap ,
Introduction Software testing open source tool, Speech
(synthesis and recognition)software
Day 4: Introduction to Moodle , A-view , Weka
Day 5: Introduction Integrated Library Management
Software:koha,Dspace ,Joomla Open Source Software:
an overview
Resource Person: Faculties from Reputed Engineering
Colleges and Industries
IMPORTANT DATES:
Registration on or before: 25 May 2015
Workshop dates: 01st 05
th June 2015
REGISTRATION:
Registration of delegates can be made in advance by
remitting the registration fee as indicated below along with
the registration form. Registration fee per participant is
given below.
Faculty from Academic Institutions - Rs. 2,000/-
Industry personnel - Rs. 2,500/-
Remittance of fees, should be made through local pay order or
demand draft drawn in favor of The Director, G. H. Raisoni
College of Engineering, Nagpur, payable at Nagpur.
ACCOMMODATION: Assistance for accommodation will be provided by college.
FOR FURTHER DETAILS: Prof. Sonali Nimbhorkar, Coordinator
Email ID [email protected]
Mobile No 9881713143
ABOUT NAGPUR:
The City of Nagpur, popularly known as Orange City has been
in lime light due to the ambitious project multi modal
International Cargo hub and Airport (MIHAN) which offers
great scope for the regions development in terms of investment
and job opportunities. Nagpur has large number of central and
state government offices, educational institutions up-coming
software companies and is surrounded by a number of large and
reputed industrial estates, and several tourist spots such as
Ramtek, Sevagram and the pench and Tadoba tiger forest
reserves. The airport and the railway station is just 10 km away
from the institute.
-
G H Raisoni College of Engineering, Nagpur (An Autonomous Institute under UGC Act 1956, Affiliated to RTMNU, Accredited by NAAC and NBA)
TEQIP II Sponsored STTP on Free/Open Source Software
1st to 5
th June 2015
Program Schedule
Session I
10am to 11:30am
High
Tea
11:30a
m to
11:40a
m
Session II
11:40am to 1:10pm
Lunch
1:10pm
to 2pm
Session III
2pm to 3:30pm
High Tea
3:30pm
to
3:40pm
Session IV
3:40pm to 5:10pm
Day-1
01/06/2015
Keynote on
Introduction to
Open source.
What is Open Source
Software (OSS) &
Why?
Introduction to Ubuntu
,Installation
Open source software
for numerical
computation
Day-2
02/06/2015
Mathematical tool:
Downloading and
Installation of Scilab
Electronic design
automation (EDA)tool
Downloading and
Installation of OSCAD
Introduction to
OSCAD
Day-3
03/06/2015
Network Security
tools: wire shark
,Nmap
Hands on practice
Introduction Software
testing open source tool
Speech (synthesis
and
recognition)software
Day-4
04/06/2015
Introduction to
Moodle
Introduction A-view
software
Introduction Weka(data
Mining tool)
Hands on Practice
Day-5
05/06/2015 Introduction
Integrated Library
Management
Software:koha,Ds
pace
Joomla Open Source
Software: an overview
Valedictory Function