Quick Training of Troops Explained

&

Creating Large Queues of Troops Explained

We all run out of troops sometimes and there are some ways to replenish your

troops. Of course You can Revive wounded troops and although this is not costly

for troops like Scouts, Archers etc, the time needed for reviving goes up when

doing Hcav, Catas and Siege Troops Like Catas, Ballistas ( Rams).

If you have a lot of speed ups, some people will go that way, but if not , you

actually have to train them again. That is of course the troops you can train, rare

troops can only be obtained in chest, boxes, promotions, gifts etc. And of course

you can open some troop boxes from inventory.

But sometimes when you have been busy on the battlefield you need to retrain ,

catas, ballistas, Hcav etc. ( and you can’t revive or open troopboxes)

Let us discuss a few options that are available when you need to replenish faster

some much needed (trainable troops)

Of course you should always be training in as much cities as possible either

concentrating on your most used troop or use cities to train a diversity of troops

like,

City 1 - Hcav,

City 2 - Catas

City 3 – Catas,

Etc etc

This to replenish your losses and keep your stock of fighting troops available.

But not everybody can let his computer run 24/7 and let the scripts handle the

training.

And thus sometimes it’s needed to create troops fast and with some dedication

this is possible.

And since with dedication almost everything is possible, we will cover as well

how to create large queues of troops.

For this training we need to check and set up a few things.

1) Troop training speed

2) Increased Population

Both are subject to caps, so you need to reach the Caps as close as possible, be

equal or higher. Depending on your cards etc

In this case 3778 TTs is

close to cap & Population

buff is higher then cap.

A Quick Replenish; By training this way you will be trading some resources & troops for speed and

the quick availability of troops that you need. In this scenario, we do Heavy Cav.

With above TTS of 3778% and Population buff of 131,25% ( which is over cap of

75%)

Goto Bot , then POPULATON tab.

I will train the Hcav in city 1 ( for this tutorial) and I will be dismissing SCOUTS to

get Idle Population, which will be boosted by the TR card, giving me more Idle

Population. ( scouts were the only troop available to dismiss)

This is a dropdown box which gives you the option to

choose which troop to dismiss. The options are Supply Troop (ST) , Militia (MM)

,Scouts, Pike , Swords, Archers.

You use the troop you have the most of, I use in this tutorial scouts as I have a lot

of them. But if you have a lot of the other troops as mentioned here above, then

use those. Make sure you have a few millions of those troops you will be using in

the City where you will be training.

Now that I have selected SCOUTS to be dismissed for Idle population.

I will click Dismiss button.

By dismissing the scouts, I now have :

Above Idle population, that can be used to train what I need.

I will Now go to the TRAIN tab in bot and set it up.

I selected my city 1 to train Heavy Cavalry. The Auto Train function will start

filling up the Queue and use the idle population we had created above for Hcav

Training.

Now we go back to the Population tab

Every time the dismiss button becomes black ( available), we click it and it will

dismiss troops, auto train will pick up the idle pop and starts filling the available

queues in that city.( If the button is greyed out, we can’t use it temporarily)

When all Queues are filled then goto TOOLS.

In Tools we goto TRAIN tab.

Here you can see the filled Queues of Hcav.

In the city tab you can now use a speed up on the queue and you will quickly

have the troops you need, do it a few times, or dedicate a few hours and you can

build up a lot of troops in a short time.

A Bigger Replenish; Basically the same method as we used above. As you saw I had full Queues of

Hcav,

For this Tutorial to continue, I went first back to TRAIN in BOT and turned it OFF.

Now I goto POPULATION tab in BOT

And click to delete all queues.

This will create a massive idle population, by deleting several queues at once.

As you see I have now over a Million Idle Population.

I will Now Switch the TRAIN tab in BOT to make me Swords.

Now I have swords in training, and the reason I did is that it takes 5hours + to

finish. This will put a “block” in the Queues so that they will not run out quickly.

IN TRAIN in BOT tab I will set to Supply Troops for example, to be trained.

Now I go Back to POPULATION tab and I repeat the Process of dismissing scouts

And now the queues after the first queue of swords get filled up with Supply

Troops. When all Queues are filled go to TRAIN tab in TOOLS.

Here you see the Queues in place.

You want to manually remove the all the supply troop queues by clicking the

X in front of each queue. ( If you were doing this in population tab, via delete

queues, you would be deleting the first queue too)

Till you have this.

Auto Train kicks in and makes more supply troops.

Now go back to POPULATION tab in bot and repeat the process of dismissing

scouts. Till your Queues are full again.

And manually delete again as described above

Untill you slowly slowly start filling up large queues of troops.

You can delete the larger queues and now train Bigger batches of the troops you

need and want.

You can then use speed ups or tutelages to finish that queue

For Tutorial purposes we used an example of using a surplus of scouts and

converting them to a troop we needed urgently, This way you “Sacrifice”

some scouts and resources for the troop or troops you needed.

This method is of course faster then waiting for your cities to normally train

them.

If you are a multitasker, and you have a lot of the dismissible troops, like

ST, MM, Pike, Swords, Archers, you can do this with several cities at the

same time.

When done, and you have what you need, then you can let all your cities

train supply troops or MM or Scouts. They are fast and cheap.

Once you have accumulated a lot of supply troops, MM, or scouts, you can

use them to convert them quickly into the troops you need, like we

explained in this tutorial. (Only then with cheap supply troops, but your

choice to create scouts if you don’t want supply troops. And some people use

big quantities of scouts as well in defending, there is always a use for them)

You can use the ST, MM or scouts also for a Tournament and use the

Tournament mode in the POPULATION tab.

It does exactly as the description says.

In General you will need cities with 10-12 Barracks, as each Barack gives

you 1 queue. If you have a city with only 4 Barracks and the rest cottages,

you will only have 4 queues. So Try to balance your cities out in a mix with

barracks and cottages, to have enough queues and enough population.

You can create with these methods enormous queues with a bit of

dedication. ( & sacrificing troops and resources.)

REMEMBER: you will only get back half the resources and half the

population when you dismiss a queue. For example: 12 queues x 100,000

troops = 1.2 million troops , when removed from barracks it will give you a

idle population of 600,000.

Enormous queues as described here above , that are possible to create is

what some players do, and they keep removing them and “grow” them

until these are huge queues of troops. They release these huge queues in

general as Swordsmen , during tournaments ( for might purposes) in the

“Classic Tournaments of Might” ( TR might doesn’t count in these

tournaments)

When you are going for these huge queues, then TUTELAGES are very

handy as they can bring down these queues from weeks to a matter of days

or hours.

In the game there are 3 kinds of tutelages

1. Lancelot’s Tutelage , reduces total train time by 30%

2. Arthur’s Tutelage , reduces total train time by 50%

3. Merlin’s Tutelage , reduces total train time by 70%

: Sharing is knowledge, and a lot of players are not sharing. Yes it

gives you and edge, or advantage, but it leaves also many people clueless. The

objective of these tutorials, is to teach, learn, educate players so ALL players have

a better under understanding of the game. The more players participate, the

better the overall experience is for all players. More attacking and defending

means “lively” domains full of activity.

Thanks to Dutch for aiding in tutorial