Training Courses on BioPAT MFCS/win 3.0, DoE and MVA...

Training Courses on BioPAT® MFCS/win 3.0, DoE and MVA 2013

turning science into solutions

Basi

c Co

urse

Bio

PAT®

MFC

S/w

in 3

.0 –

Use

r Tr

aini

ng

Basic Course BioPAT®

MFCS/win 3.0 User Training

This training is primarily directed towards persons starting with a new BioPAT® MFCS/win system or using BioPAT® MFCS/win for their daily work. The target of the training is to convey handling with the Batch-Management, Sample-Management, Plots and creation of fermentation documentation. Furthermore training for creation of calculations, profiles and using of recipes will be provided. The participants will have notebooks for hands on training.

Topics included: – Introduction into SCADA-System BioPAT® MFCS/win– Shell, Service Control Program– Data storing and Batch Management– Process Visualization with Operator Service Program– Off-line Data Management– Evaluation by Plotting– Reporting of Batches and Data export– Configuration of Variables, Controllers and

Calculations– Update Configuration and Backup Copy– Using S88 Recipes– Help-Documentation

Workshop Information

Course duration

3 days Course date

19 – 21 March 2013 (German) 4 – 6 June 2013 (English) 17 – 19 September 2013 (German) 19 – 21 November 2013 (English) Course fee

¤ 1800 plus VAT Maximum of 8 trainees per training

Adva

nced

Cou

rse

BioP

AT®

MFC

S/w

in 3

.0 –

Man

ager

Tra

inin

g

Advanced Course BioPAT® MFCS/win 3.0 Manager Training

This training is primarily directed towards administrators and experienced users of existing BioPAT® MFCS/win systems. The focus of this advanced training is on extended functionality of the software, e. g. creation of event dependent processes by using the S88 recipe approach. Furthermore comprehensive configuration of the system including integration into network environ-ments is provided. The participants will have notebooks for hands on training.

Topics included:– Overview about BioPAT® MFCS/win and its basic

functions (Operator Service Program, Data Management, Configuration options)

– Configuration of Process Units and Control Units– PID Control and Applications– User Management, 21 CFR Part 11 and Audit Trail– Configuration Reports– Update Configuration and Backup Copy– Maintenance, System Recovery and System Utilities– Processes automation with S88 Recipes– Installation and Uninstallation of MFCS/win

Server | Workstation– MFCS/win Network Structure and Settings– Security Settings– Help-Documentation


Course duration:

4 days Course date

8 –11 April 2013 (German) 25 – 28 November 2013 (English) Course fee


Advanced Course BioPAT® MFCS/win 3.0 Application Training

This advanced training is primarily directed towards power users who want to create own control and feeding strategies inside BioPAT® MFCS/win with recipes and calculations. The target of the training is focused on extended and individualized functionality of BioPAT® MFCS/win, e. g. creation of event depen-dent processes by using the S88 recipe together with complex calculations in BioPAT® MFCS/win.

Topics included:– Integration, Differentiation– MIN, MAX Determination– Moving Average, Timers– If then Else Structures– OUR, CER, RQ Calculation– Exponential Feed– PID Controllers and MFCS PID Control– pO2 Cascade Control (DO Control)– PD Gravimetric Flow Control– Fedbatch Fermentation with Gravimetric Flow

Controllers– Continuous Fermentation with Gravimetric Flow

Controllers– DO-Stat | pH-Stat– kLa | Determination of kLa


Course duration:

3 days Course date

18 – 20 June 2013 (German) 3 – 5 December 2013 (English) Course fee


Adva

nced

Cou

rse

BioP

AT®

MFC

S/w

in 3

.0 –

App

licat

ion

Trai

ning

Basic Course MFCS/win 3.0Crossflow

Basi

c Co

urse

MFC

S/w

in 3

.0 C

ross

flow

This training is primarily directed towards persons starting with a new MFCS/win system or using MFCS/win for their daily work with Crossflow systems.The target of the training is to convey handling with the Batch-Management, Sample-Management, Plots and creation of filtration documentation. Furthermore training for creation of calculations, profiles and using of recipes will be provided. For practical exercises the participants will have training notebooks for direct use.

Topics included: – Crossflow filtration, filtration parameters– Transmembrane pressure, Reynolds number, yield– Introduction into SCADA-System MFCS/win– Shell, Service Control Program– Data storing and batch management– Process visualization with Operator Service Program– Off-line data management– Evaluation by plotting– Reporting of batches and data export– Configuration of variables, controllers and calculations– DCU sequences for filtration processes– Configuration of equipment phases– Update configuration und backup copy– Automatization of filtration processes with S88 recipes


Course duration:

3 days Course date

25 – 27 June 2013 (English) Course fee

¤ 1800 plus VAT Maximum of 8 participants per training

Basic Course MFCS DoE

DoE Design ofExperiments

Nowadays, DoE is one of the most important tech-niques for systematic planning and execution as well as statistical evaluation and modeling of experiments. Advanced by the FDA initiative for Process Analytical Technologies (PAT), the implementation of DoE in the development and design phase of products and pro-cesses is frequently applied. Target of the training is to introduce DoE tools for your cost- and time-saving process optimization.

Topics included:– Basics of Design of Experiment (DoE) methods– Modde 9.1 and MFCS DoE module– Discover optimal operation conditions:

screening, optimization and robustness test– Elimination of insignificant CPPs – Efficient identification of the relationship between

critical quality attributes (CQAs) and critical process parameters (CPPs)

– Objective statistical analysis – Process optimization with DoE for

Fermentation | Cross flow applications


Course duration:

2 days Course date

16 – 17 April 2013 (English) Course fee


Basi

c Co

urse

MFC

S D

oE

Basic Course MFCS MVA

Basi

c Co

urse

MFC

S M

VA

In several cases, different critical process parameters (CPPs) are assumed to be independent of one another. Hence, processes are only analyzed in an univariant way. In fact, these parameters often influence one another and show a high correlation. Certain CPPs cannot be measured directly, but rather result from a combination of multiple parameters. To uncover these correlations, Multivariate Data Analysis (MVA) methods must be applied. Target of the training is to help you transform raw data into valuable information and make decisions quickly and confidently.

Topics included: – Basics in advanced data analysis – Principal Component Analysis (PCA) and Partial Least – Square Regression (PLS)– Simca-P 12 and MFCS MVA Module– Batch Modelling and Evaluation for improved

process understanding– Basis for advanced process control


Course duration:

2 days Course date

24 – 25 September 2013 (English) Course fee

¤ 1400 plus VAT Maximum of 8 participants per training

Basi

c Co

urse

DCU

– U

ser

Trai

ning

Basic Course DCU User Training

This training is primarily directed towards persons starting with a new DCU fermenter system or using DCU fermenter systems for their daily work.The target of the training is to convey handling with the Main-Operation, Calibration-Operation, Controller-Operation and other System-Operation. The participants will have notebooks for hands on training and also will have training with fermenter systems.

Topics included: – Start-Menu „Main”– Calibration (probes, flow, balances)– Control Loops– Parametrisation of Control loops– Setpoint Profiles– Gravimetric Dosing– pO2 Cascade Control – pO2-Gasmix Controller, pO2-Gasflow Ratio

Controller, Oxygen Enrichment– Phases (Sequences)– Alarms– User Management– Trend Display– Logbook Functionality– System Management (Network, Manual Operation)


Course duration:

2 days Course date

Course date on demand Course fee


Organization and Information

ServicesThe participants will have notebooks for hands on training. Documents, refreshments and daily lunch included.

VenueSartorius CollegeOtto-Brenner-Str. 37079 Goettingen

Hotel AccommodationOn request, we will be happy to reserve your hotel accommodations.

TransferAll courses start at 9 am. Transfer to training-site and back to the preferred hotel is included. Our shuttle service from the hotel starts at 8:45 am.

ContactKirsten Ludwig-WiensTraining CenterSartorius Stedim Biotech GmbH37079 Goettingen, Germany

Phone +49.551.308.1173Fax +49.551.308.1293

[email protected]

Cancellations must be in writing and received 20 working days prior to training courses and workshops. If a registered person cannot attend a course the full registration fee is due and payable, they may appoint a substitute to attend.

NEWEXPAND Training and Seminar Catalog 2013 available!

Registration FormFax +49.551.308.1293

Basic Course MFCS/win 3.0 User Training

Advanced Course MFCS/win 3.0 Manager Training

Advanced Course MFCS/win 3.0 Application Training

Basic Course MFCS/win 3.0 Crossflow

Basic Course MFCS DoE

Basic Course MFCS MVA

Basic Course DCU User Training

Course date

Secure yourself the new EXPAND® Training and Seminar Catalog 2013!

Please send me a copy of the EXPAND® Training and Seminar Catalog 2013.

Name

First Name

Title

Company

Department

Company Address

Phone

Fax

E-mail

Hotel Accommodation

Arrival Date

Departure Date

Non-smoking room preferred

Date | Signature

Specifications subject to change without notice. Printed in Germany on paper that has been bleached without any use of chlorine. | W Publication No.: ST-1009-e12094 Order No.: 85032-535-87 Ver. 09 | 2012

Sartorius Stedim Biotech GmbHAugust-Spindler-Strasse 1137079 Goettingen, Germany

Phone +49.551.308.0Fax +49.551.308.3289

www.sartorius-stedim.com

Training Courses on BioPAT MFCS/win 3.0, DoE and MVA...

Documents

Transcript of Training Courses on BioPAT MFCS/win 3.0, DoE and MVA...