Training Course
description
Transcript of Training Course
-
Pro/Piping
Basic Training
-ASHISH A. SHAH -TEJAS B. SHAH
-
CONTENTS OF THE TRAINING:
1. Pro/piping introduction
2. Line stocks
3. Routing techniques
4. Modifying pipelines
5. Fittings
6. Piping information and drawings
-
MODULE 1 - INTRODUCTION
-
vPRO/PIPING INTRODUCTION
Optional module
Available in assembly mode only
Go to Application/Piping
Rigid/Flexible pipes
Parameter associativity.
-
DIFFERENT TERMINOLOGIES
Pipeline: An assembly feature consisting of line segments that represent the centerline of the pipe.
Pipeline parameters: Parameters that define information such as fluid type, flow direction, pressure, etc.
Fitting: A part that you assemble at the location where a pipe joins another pipe, is terminated, or is clamped.
Line stock: A list of parameters that define the size and shape of the material used to create a pipe.
-
Regular Model Tree Model Tree in piping view
-
MODULE 2 - LINE STOCKS
-
vLINE STOCKS(*.STK)
For new line stock creation
Read/Write option
Edit option
-
Defines Name, material and grade of the pipe.
Defines shape and x-section type of the pipe.
Defines pipe and corner types.
Size parameters.
Default value\value\..
-
Different design rule parameters and User-defined parameters.
-
MODULE 3 - ROUTING
-
vROUTING TECHNIQUES
Route menu options:
Pipe environment control
EZRouter
To pnt/port
Extend
Follow
Connect
Branch
-
MODULE 4 - MODIFYING PIPELINES
-
vMODIFYING PIPELINES
Modifying corner type
Modifying parameters
Modifying flow direction
Modifying line stock
Modifying Flex shape
-
SQUARE MITER
DIFFERENT CORNER TYPES
DIAGONAL MITER
BEND FITTING
-
Modification of parameters Modification of line stock
-
FLOW DIRECTION CHANGE
-
FIXED LENGTH/FREE LENGTH INTERCHANGE
-
MODULE 5 - FITTINGS
-
FITTINGS
ADDING FITTINGS
TYPES OF FITTINGS
FITTINGS AND COMPONENTS
-
ADDING FITTINGS
A fitting is an assembly component, typically a part, that you add to the piping system to perform a specific function.
Essentiality of Entry Ports and Datum Points for assembling
Pro/LIBRARY_ACCESS license
Fittings in a piping system can be placed using piping functionality, or conventional assembly techniques
-
There are three types of Fittings:
TYPES OF FITTINGS
CORNER FITTINGS END FITTINGS INTERNAL, or
STRAIGHT FITTINGS
-
FITTINGS PLACEMENT TECHNIQUES
Allow the system to orient it along the pipeline
Insert it at a pipe end (End Fittings)
Insert it at a corner of a pipeline (Corner Fittings)
Insert it at a selected point and break the pipe at the entry ports (Straight break Fittings)
-
MANIPULATING FITTINGS AFTER PLACEMENT
Delete it from a pipeline
Change its orientation
Flip its ends 180 degrees
Twist it along the positive z-axis, and specify a value for rotation
Align the x-axis of an entry port with a selected edge
Align the y-axis of an entry port with a selected edge
Replace one fitting with another one
-
FITTINGS AND COMPONENTS
Line Assemblies
A line assembly is an inseparable piping assembly that is designed, ordered and tracked by the customer as a single unit.
Note: All pipelines should be routed within a line assembly
-
PIPING COMPONENTS All piping components should be assembled into the piping assembly.
The best way to locate piping components is to define datum geometry in the piping skeleton and mate the components to the skeleton.
-
EXTRACTING A MODEL An extracted model is a combination of different fittings and pipes that is documented as a single entity.
The extracted model has a .prt extension, but only one feature (a merge), regardless of the number of components it references.
After you select parts to include in the extract model, you can create a drawing of it.
-
MODULE SUMMARY
A fitting library is a family table.
Fitting parts require entry ports and typically a datum point, in order to be considered fittings.
Fittings can be placed with conventional assembly techniques or the special insert fittings.
Using insert fittings gives you the ability to replace, flip and twist fittings.
An extract model is merge of fittings and solid pipes.
-
MODULE 6 Piping Information and Drawings
-
Generating Piping bend location information
Generating Piping machine location information
Using Pro/REPORT functionality in a table format to retrieve Bill of Materials information into a drawing
PIPING INFORMATION & DRAWINGS
-
Using the Info option in the PIPING menu, various types of information can be generated about a piping assembly in the following ways :
Obtain the length of a selected pipeline, segment, or line stock
Create bend machine and bend location tables
Generate a Bill of Materials
For a selected pipeline, obtain the name of the working assembly, pipeline, and current line stock
For a selected pipeline, obtain the name of the working assembly, pipeline, and current line stock, as well as the material, diameter, length, and wall thickness of the pipe
Check for line stock parameter violations
OBTAINING ENGINEERING INFORMATION
-
CREATING PIPE DRAWINGS
Drawings can be created for:
The entire assembly including pipelines
The solid pipes themselves
Extract models of pipelines and fittings
Various Pro/REPORT tables with engineering information
-
CHECKING FOR VIOLATIONS
To identify the violations that have been imposed upon existing pipes, you can perform a Check Pipe using parameters entered into the LINESTOCK dialog box.
Pro/PipingSlide Number 2Slide Number 3Slide Number 4Slide Number 5Slide Number 6Slide Number 7Slide Number 8Slide Number 9Slide Number 10Slide Number 11Slide Number 12Slide Number 13Slide Number 14Slide Number 15Slide Number 16Slide Number 17Slide Number 18Slide Number 19Slide Number 20Slide Number 21Slide Number 22Slide Number 23Slide Number 24Slide Number 25Slide Number 26Slide Number 27Slide Number 28Slide Number 29Slide Number 30Slide Number 31Slide Number 32Slide Number 33Slide Number 34