Training by Airbus · • Three-engine ferry flight • Technical flight familiarisation • Fleet...

Training by AirbusReaching new horizons together

Services by AirbusTraining

Training by AirbusReaching new horizons togetherSafety & QualityOEM expertiseFleet-wide experience

Innovat ionActive learningKnowledge, skills & attitude

ProximityCost-effective solutions

Value creationWorldwide

04 Airbus Training Network06 Flight Training10 Flight Operations Training12 Cabin Crew Training16 Maintenance Training20 Structure Training22 e-Training26 Training Solutions

Training Contents

003Training by Airbus

Training

Training in aviation faces new challenges every day. Proximity, technology, competitiveness, training for the individual and extended partnerships are the new horizons for today and tomorrow. As the leading aircraft manufacturer, we are taking a proactive initiative to reach these new horizons together with our new services offer.

Philippe MhunHead of Customer Services

Training by Airbus004

AIRBUS TRAINING NETWORK_

01. ATC* Europe - Toulouse (France) Flight Training Approvals: CAAC (A380 and A300-600 only), EASA, FAA (A350 only), RFCAA Maintenance Training Approvals: CAAC / CASA / EASA / UAE GCAA / RFCAA

02. ATC* Europe - Hamburg (Germany) Maintenance Training Approvals: EASA / UAE GCAA / RFCAA

03. Beijing (China) Flight Training Approvals: CAAC / EASA Maintenance Training Approvals: CAAC / EASA

04. Bangalore (India) Maintenance Training Approvals: EASA / Director General of Civil Aviation (DGCA)

05. New Delhi (India) Flight Training Approvals: EASA

06. Dubai (UAE) Flight Training Approvals: EASA / UAE GCAA

07. Miami (U.S.A.) Flight Training Approvals: Brazilian Civil Aviation Authority (ANAC) EASA / FAA / Mexican Civil Aviation Authority (DGAC) Maintenance Training Approvals: EASA / Mexican Civil Aviation Authority (DGAC)

08. Mexico Flight Training Approvals: FAA / Mexican Civil Aviation Authority (DGAC)

09. Singapore (AATC, SIAEC) (AATC) Flight Training Approvals: EASA / CAAS (SIAEC) Maintenance Training Approval: EASA

10. Jakarta (Indonesia) Flight Training Approval: EASA (GMF) Maintenance Training Approvals: EASA

11. Campinas (Sao Paolo) Flight Training Approval: Brazilian Civil Aviation Authority (ANAC)

12. Buenos Aires (ARG) Maintenance Training Approval

13. Tunis (TAR) Maintenance Training Approval

14. Bangkok (THA) Maintenance Training Approval

Reaching new horizons together

15. Ho Chi Minh (Saigon) Flight Training Centre in progress

16. Hong Kong (HAECO) Maintenance Training Approval (EASA)

11

12

7

8

Training by Airbus 005

AIRBUS TRAINING NETWORK_

*Airbus Training Centre. Further approvals can be provided upon request

Your training: where you need it, when you need it, how you need it.

15. Ho Chi Minh (Saigon) Flight Training Centre in progress

16. Hong Kong (HAECO) Maintenance Training Approval (EASA)

1

2

13 3

14415

1656

9

10


Basic pilot training• Entry Level Training Jet Familiarisation• Entry Level Training - Multi Crew Cockpit

Jet Familiarisation• Base flight training or zero flight

time training (ZFTT)• Type Rating (standard transition training)• Reduced Type Rating course

(Cross Crew Qualification)• A330 to A350 Difference course• A320 Same Type Rating

Familiarisation briefing

Extended pilot training• ETOPS (Extended Twin Operations)• UPRT and UPRT recurrent e-Training

for Flight crew• LVO (Low Visibility Operations)• HUD (Head up Display) Course• Command course• Recurrent/Refresher Training• Airbus Crew Resource Management• Maintenance Course for Pilots• Familiarisation courses & briefings:

(ROPS; FMS2: FANS A+/B+; FLS; Sharklet Familiarisation briefing; AP/FD TCAS; HUD L4/5 Familiarisation briefing)

• FlySmart with Airbus for flight crew

FLIGHT TRAINING BY AIRBUS_


Expert pilot training• Three-engine ferry flight• Technical flight familiarisation• Fleet technical pilot

Instructor training• Type rating instructor• Type rating instructor extension• Cross Instructor Qualification (CIQ)

Initial Operating Experience (IOE) also named

• Line Flying Under Supervision (LIFUS)

Examiner training

These courses exist in e-TrainingFLIGHT TRAINING BY AIRBUS

_


Airbus Cockpit Experience (ACE) trainer*

Optimised learning environment

Sound balance between theory and practice

Evidence-based training

Commonality by design Airbus’ uniqueness• Pioneering use of fly-by-wire technology• Standardised flight deck layouts and common systems• Consistent pilot aircraft interface• Similar aircraft flying and handling procedures• Same process and crew discipline for abnormal

and emergency procedures• Competency-based A320 modular flight

training (Nov 2017)

WE STRIVE TO INNOVATE IN TRAINING CONCEPTS AND TECHNOLOGIES_

* Presently available for A350XWB & under development for A320 & A330


Full Flight Simulator (FFS)Airbus Pilot Transition (APT) trainer

Our priority: your knowledge, skills and attitude excellence• Airbus training standards• Focus on “need to know”• Highly qualified and experienced instructors• Fleet-wide knowledge and worldwide

in-service experience• Human factors

Benefits Pilots trained on one type of

aircraft feel equally comfortable with any of the others

Greater scheduling flexibility

Optimised crew management

* Presently available for A350XWB & under development for A320 & A330


FLIGHT OPERATIONS TRAINING BY AIRBUS_

These courses exist in e-Training


Line personnel• Dispatcher course• Load Control Transition Course

Performance training courses• Basic Performance Engineer Course

• Aircraft Systems briefing

• Advanced Performance Engineer Course

• Weight and Balance Engineer Course

• FlySmart with Airbus Administrator Course

• Getting to Grips with aircraft performance course

Safety• FDA Safety Analyst

• Threat and Error Management

• Operator SMS course

Documentation & Procedures• Administration of Flight Ops Manuals

• A350 / A380 ECAM Customisation Course

• Administration of Flight Ops manuals including XML Authoring e-Training course

Aircraft manufacturer expertise Higher payload

Increased engine life

Faster turnaround times

Simplified processes

Extensive knowledge of the aircraft


Cabin Crew courses• Type Specific Cabin Crew training• Train the Trainer course

(Airbus Cabin Crew Instructor Course)• Cabin Crew Enhanced FAP

(Flight Attendant Panel) module course• Type Specific Cabin training

for A320 Family Corporate Jet• Crew Resource Management

(Human factors)• Initial Operating Experience (IOE)• A330 to A350 difference course

for cabin crew

Unequalled realism through optimised tools• Cabin Emergency

Evacuation Trainer (CEET) Door trainers Emergency Slide and raft Emergency equipment

• FAP trainer (Flight Attendant Panel)• Aircraft visit• Virtual Cabin• Virtual Handset trainer

(only for A350 XWB and A380)*

Continuous support to develop and update your own training programmes and operating manuals*These training devices are also available individually for specific aircraft types

CABIN CREW TRAINING BY AIRBUS_

CommunicationBehaviour managementAssertiveness

SafetySafe learning environmentReduced practice on aircraft

Active learningOperations

CABIN CREW TRAINING BY AIRBUS_

Practice to reduce training on real aircraft. Successful aircraft Entry-Into-Service




Cabin Knowledge Modules (theoretical training)

Available via our e-Training Library*

FAP trainer** (Flight Attendant Panel)

To practise and gain experience using a virtual FA

* *These training devices are also available individually for specific aircraft types* Available via the e-Training platform as standalone for A350XWB only

CABIN TRAINING SUITE_

These courses exist in e-Training Library


Cabin training package, at your home base

Significant savings in course development and update, time spent training on aircraft

"Learning by doing" approach supported by virtual and interactive tools

Combined and balanced theoretical and practical training

Virtual CabinInteractive tool for aircraft and cabin familiarisation

Virtual Handset trainerEnables interaction with the communication system (only for A350 XWB and A380

• Cabin Training Suite is an instructor-led onsite solution developed for successful Entry-Into-Service and maintaining skills and competencies.

• Airbus Cabin Crew Training media can be used by the airline in a large range of training courses:

Initial training for aircraft type specific

Difference courses Recurrent training Refresher training

* *These training devices are also available individually for specific aircraft types


Type training• Base Maintenance Certifying Engineer• Type Training Maintenance

Mechanical (B1)• Type Training Maintenance

Avionics (B2)• Type Training Maintenance

Mechanical + Avionics (B1+B2)• Difference Training

(Cross Maintenance Qualification)• A380/A350 New Technology

Specialised courses• Engine Run-Up/Taxiing• Electrical Wiring Interconnection

System (EWIS) • Fuel Tank Inerting System (FTIS) • Optical Fiber Inter System• Oxygen basic• Hydraulic Maintenances Practices• Aircraft Rigging • ETOPS Maintenance• CAT II / CAT III • Troubleshooting • A380 Supplemental Cooling System

MAINTENANCE TRAINING BY AIRBUS_




Recurrent trainingA320 Maintenance Recurrent

Initial Operating ExperienceAirbus support your aircraft Entry-Into-Service by sending experienced instructors at your facilities

Non-approved courses• General Familiarisation • Executive General familiarisation • Line Mechanics course• Cargo loading• Ground handling• Cabin Interior & Emergency Equipment • Ramp and transit


ACT appreciations on skills and competences*

Faster fault identification and ease in routine tasks

Decrease in maintenance errors and components’ damages

* Survey answered by 15 customers, representing 281 trainees having followed an ACT course with Airbus

AIRBUS COMPETENCE TRAINING (ACT) _

Active learning• Active participation of the trainee

throughout the course• Learning-by-doing by interactively operating

inside simulated aircraft and cockpit

Operationally-oriented training• Servicing, tests and troubleshooting

maintenance tasks conducted by the trainee through realistic operational scenarios

• Practical sessions with actual digital aircraft documentation: Airn@v

• Access to different aircraft type training with one classroom layout

Bringing the aircraft into the classroom Establish an efficient learning experience combining advanced theory and comprehensive practical exercises

A concept approved by Airworthiness Authorities

Reduces practical training on aircraft by 50%

Significant savings Reduced practice on aircraftImproving Operat ional Rel iabi l i ty

Stress reductionSafe learning environment

Human FactorsBetter communicationFocus on the "need to know"


ACT appreciations on skills and competences*

Decrease in maintenance errors and components’ damages

Optimisation in technical documentation usage

Decrease of inappropriate removals

Improved accuracy in problem solving and troubleshooting tasks

Increase safety awareness

Concept approved by the Airworthiness Authorities

AIRBUS COMPETENCE TRAINING (ACT) _


In-house structure coursesNew composite repair shop facilities in Toulouse (France) and Beijing (China) training centres have been set up allowing the best practices of composite structure repair.

On-site courses structure tool kitStructure trainings are widely practical and hands-on training oriented, covering composite repair, fastener installation removal and damage assessment. Structure repair training kits have been developed accordingly thanks to Airbus’ training experts.

021

Metallic courses• SRM Familiarisation

for damage assessment• Structure Repair Manual (SRM)• Structure Maintenance and Repair • Fuel Leaks Detection and Repair • Fastener and cold expansion • Corrosion Control • A380 Glare Repair • Metallic Structure Repair engineering• Fatigue and Damage Tolerance

Composite courses• Basic Composite Repair

for technicians • Advanced Composite Repair

for technicians• Composite Repair engineering • Radome Repair for technicians • Composite Repair for technician

Equipment adapted to each different training course FLEXIBILITY

Customised training solutions by domain, target population, MRO and airline operational organisation

Safe release of the aircraft after repair

STRUCTURE TRAININGBY AIRBUS _


Benefits Online access to Airbus educational content at highest standards, and OEM-backed data

Self-paced study for better knowledge retention

Access at any time, from any location and device

Efficient Learning Management System (LMS) with advanced features

Possibility to edit Airbus declaration of attendance at course completion

e-TRAINING BY AIRBUS _


Shaping the future of distance learning• Extended online courses portfolio • Focus on Recurrent Training with the introduction of e-Training libraries• New platform for effective and enjoyable learning experience

e-TRAINING BY AIRBUS _


• Systems familiarisation courses and briefings:

ROPS familiarisation course FMS2 familiarisation course FANS A+ familiarisation course FANS B+ familiarisation course FLS familiarisation course Sharklet familiarisation briefing HUD L4/5 familiarisation briefing AP/FD TCAS familiarisation course

• A320 Same Type rating Familiarisation briefing

• UPRT Recurrent e-Training for flight crew

• N-Flysmart e-Training course for Flight crew

• eQRH e-Training course for Flight crew

Flight e-Training courses Maintenance e-Training courses• EWIS (Electrical Wiring

Interconnection Systems) • FTIS (Fuel Tank Inerting System) • A350/A380 New Technology • General Familiarisation • Human Factors • Optical Fiber Inter System (OFIS)

e-Training libraries• A320 Maintenance Recurrent

e-Training library• A320 e-Systems Knowledge

Library for flight crew• A300-600 and A310-300

e-Systems Knowledge Library for flight crew

• A350 Cabin Knowledge Modules (CKM)


Digitalized modules to refresh on Avionics, Airframe & Powerplant, up to EASA level 3. Instructor-led videos to support self-study, developed with experienced Airbus instructors Guided practical exercises for troubleshooting preparation

Cabin Crew e-Training coursesA330 to A350 difference course for cabin crew

Flight Operations e-Training courses• Aircraft Systems briefing• XML Authoring e-Training course

(as part of Administration of Flight Ops Manuals for Flight Ops Engineer course)

Innovative learning media for Maintenance TrainingThe A320 Maintenance Recurrent e-Training library gives access to a comprehensive set of media to address your recurrent training and ensure continuous support to your maintenance personnel during operations.




ACT Suite Maintenance package

on training domain

ACE Suite Flight package

on training domain

Cabin Training Suite

on training domain

ACE Suite*

ACT Suite

Cabin Training Suite

A350 XWB

A320

A320

A330

A330

A340 A350

A350

A380

*Under development for A330, A320


Operational benefits• Enhanced safety and fleet

operational reliability• Optimised performance thanks

to Airbus fleet-wide experience• Airbus, a reference towards

Airworthiness Authorities

Uncompromised quality• Knowledge sharing and on-the-job

coaching by Airbus experts• Service designed to fit with

your environment and strategy• Direct access to Airbus latest

training media

Business efficiency• Reduced travel and living expenses • Minimised spending and headcount

required for training development and approvals

• Optimised human capital management

From strategy to implementation, let’s build together your training solution• To address your initial and recurrent

training needs • To bring Airbus training standards

in your organisation• To turn a traditional cost into

a competitive advantage

Airbus Flight, Maintenance and Cabin Training solutions• Airbus courseware, concepts

and technology• Instructors sourcing and

standardisation

CUSTOMISED SOLUTIONS _

For more information, please contact your Key Account Manager or:[email protected]

AIRBUS S.A.S. 31707 Blagnac Cedex, France © AIRBUS S.A.S. 2017 - All rights reserved, Airbus, its logo and the product names are registered trademarks.April, 2017. Concept design by Airbus Multi Media Support. 20170744. Photos by Airbus.Printed in France by Airbus Print Centre.Confidential and proprietary document. This document and all information contained herein is the sole property of AIRBUS S.A.S. No intellectual property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced or disclosed to a third party without the express written consent of AIRBUS S.A.S. This document and its content shall not be usedfor any purpose other than that for which it is supplied. The statements made herein do not constitute an offer.They are based on the mentioned assumptionsand are expressed in good faith. Where the supporting grounds for these statements are not shown, AIRBUS S.A.S. will be pleased to explain the basis thereof.This brochure is printed on Triple Star Satin.This paper is produced in factories that are accredited EMAS and certified ISO 9001-14001, PEFC and FSC CoC. It is produced using pulp that has been whitened without either chlorine or acid. The paper is entirely recyclable and is produced from trees grown in sustainable forest resources.The printer, Airbus Print Centre (France 31707),is engaged in a waste management and recycling programme for all resulting by-products.

Training by Airbus · • Three-engine ferry flight • Technical flight familiarisation • Fleet...

Documents

Transcript of Training by Airbus · • Three-engine ferry flight • Technical flight familiarisation • Fleet...