LITTLETOWNThe Train Station

Instructions Booklet

Assembly instructions

Cut lines

Mountain fold

Valley fold

glue spot

small hangar part 1

map of Littletown’s train stationtree tree

main building train station

benc

h

lampost

stairs

platform train station

grass

Note: Glue these two parts first to the roof edges before gluing the roof to the top of the house.

little edge

CAUTION• Use caution

when using scissors or a hobby knife.

• Glue, scissors, and other tools should be kept out of the reach of younger children.

LITTLETOWN1 - Small Hangar

Tip: Always try out the pieces before gluing to check where they fit or if they need some adjusment.

Cut lines

Mountain fold

Valley fold

glue spot

small hangar part 1

map of Littletown’s train stationtree tree

main building train stationpart 2be

nch

lampost

stairs

platform train station

grass

Note: First glue part 3 to part 1, then glue on part 2. (See photo.)

edge

This building has a few complex parts to assemble, so take your time and don’t worry if it doesn’t turn out perfectly. Your work will improve as you gain experience.Have fun and enjoy building your model.

Assembly instructions

LITTLETOWN2 - Train Station

Building

newspaper pages (See photo for a suggestion of where to glue.)

More Assembly Tips• Write the number of

each part on the back before cutting it out. This ensures keeping track of parts even after cutting them out. This is especially helpful in the case of small parts.

• Take your time to cut each piece out carefully.

• When gluing the 2 sides of a character or similar part, use glue stick instead of white glue to prevent the warping of the paper due to the large area to be glued.

• Always try out the parts to be glue before applying the glue. This helps in understanding how the parts fit together, and to notice if any adjustements are needed.

• And remember, there is no hurry, take your time, and don’t feel shy about asking another for help if a piece is difficult to assemble. Experience will come with practice and soon you will be capable of assembling complex models.

step 1

step 2

step 3

step 4

Hello!

3 - Train StationPlatform and AccessoiriesAssembly instructions

Cut lines

Mountain fold

Valley fold

glue spot

small hangar part 1

map of Littletown’s train station

main building train stationpart 2

benc

hlampost

stairs

platform train station part 3

grass

edge

This model has a few complex parts to assemble, so take your time and don’t worry if it doesn’t turn out perfectly. Your work will improve as you gain experience.Have fun and enjoy building your model.

grass

LITTLETOWN

Form three triangles and glue them under the platform to add extra strength to support the two buildings of the train station.

Glue the sign against the edge

Glue the lamposts on the floor of the platform and up against the edges to add extra strength.