TraceTek TT-TS12 touch screen controller

TraceTek TT-TS12, Touch Screen Control PanelMaking Leak Detection Systems Simple and Easy to Use

TT-TS12 TOUCH SCREEN CONTROL PANEL - PROPRIETARY

PENTAIR

THIS WEBINAR


• Mute your phones and don’t put the call on hold.

• Hold you questions to the end. Last 15 minutes reserved for Q/A

• Attendee voice will be muted until Q/A session

• Use panel on your right hand screen to communicate to moderator / presenter

TT-TS12 TOUCH SCREEN CONTROL PANEL - PROPRIETARYPENTAIR

Agenda

• TT-TS12 Interface Overview

• Responding to Alarms

• TT-TS12 Hardware and Connectivity

PENTAIR

PREVIOUS INTERFACE SYSTEMS

• Push button arrow style

• Requires menu structure memorization

• Tedious to navigate

• Limited Information Displayed


PENTAIR

USER FRIENDLY

• Touch Screen Systems

• Visual Data

• Image Intensive

• Intuitive


PENTAIR

NEW TT-TS12 TOUCH SCREEN INTERFACE

• 12” Color Touch Screen Display

• Large, Readable Format

• Big Touch Targets

•Maximum Information


PENTAIR

NEW TT-TS12 TOUCH SCREEN INTERFACE

• Local & Remote Alarms

• USB Interface

• Suitable for Industrial Environments


PENTAIR TT-TS12 TOUCH SCREEN CONTROL PANEL - PROPRIETARY

KEY APPLICATIONS – COMMERCIAL

Multiple SIMs and Complex plans

Distributed Water Leak Detection

Commercial Buildings

Water Leak Detection Data

Centers

Monitoring of Overhead HVAC

Piping

PENTAIR

KEY APPLICATIONS – INDUSTRIAL

Central Access & Information Point


Airport Fueling Systems

Tank Farms & Terminals

Above Ground Racked Piping


TT-TS12 Simple, Easy, Intuitive, Informative

PENTAIR

TT-TS12 TOUCH SCREEN INTERFACE• TT-TS12 is the Central Alarm Panel for

Medium to Large TraceTek Systems

• TT-TS12 Simultaneously:–Monitors a network of external

interface devices

– Displays status and leak detection to the user

–Maintains communication with host systems or remote viewing sites

• The TT-TS12 is designed for a control room or office environment– Sensor cable and probes can be

installed in hazardous areas but the TT-TS12 panel itself is installed in ordinary areas


PENTAIR

THE MAIN SCREEN

“All Green” is a quick indicator for a “normal” system

Main Screen

System Time and Date

Navigation Buttons

Summary Relay Status for Buzzer, Master Leak Relay and Trouble Relay

Polling Indicator - should always be scrolling to indicate that the TS12 is scanning for new data

Alarm Counter:Summarizes all events currently active anywhere on the system. All zero entries indicates a completely normal system

• TT-TS12 TOUCH SCREEN CONTROL PANEL - PROPRIETARY

Help Button

PENTAIR

MAIN SCREEN OVERVIEW – SIMPLE, INFORMATIVE

One Glance and You Know


• Instant Indication of System Status

• Polling Bar -- System Activity Indication

• Overall Status – Relay and System Data

• Navigation Buttons --Launch Pad to Other Resources

PENTAIR

STATUS BUTTON – CURRENT STATUS FOR ANY CHANNEL IS DISPLAYED

Simple gestures and buttons allow for intuitive navigation


• Basic Operating Information Displayed by Circuit

• Reset a Circuit Alarm Here

• Access to all Events for That Circuit– Simple gestures used to scroll

through events– Events can be sorted

• Additional Information Accessible on Other Tabs– Leak Map Event Details– SIM Details Delete Events

PENTAIR

LEAK MAP – LEAK LOCATION DISPLAYED

Immediate Recognition of Leak Location and Criticality


• Site Drawing or Image Can Be Uploaded

• Mapped Cable Locations Displayed

• Zoom Feature Available

• Alarm Location Displayed When Present– Provides Immediate Indication of Leak

Location– Intuitive Knowledge, Not a “Number”

• No More Lost or Misplaced Paper Maps

PENTAIR

SIM DETAILS – CIRCUIT OPERATING PARAMETERS

Circuit Health and Status at a Glance


• All Circuit Data Displayed

• Alarm Thresholds Indicated

• Useful for Troubleshooting

PENTAIR

SIM EVENTS – DETAILS FOR EACH EVENT

Historical Database of the System


• All Event Details Accessible

• Delete Events Requires Password

PENTAIR

EVENTS BUTTON – A LIST OF ALL EVENTS

Historical Database of the System


• Up to 5000 events are logged internally (and the log can be easily exported to USB stick when required)

• Filtered by Event Type if desired

• Sorted by first to last or last to first

• To see events for a specific channel, select the Status Display and the channel number of interest


SETUP BUTTON – PROGRAMMING the TT-TS12 and SIMS

• Provides Access to the Different Functional Areas

• Minimizes Navigation Steps

• Password Protected

PENTAIR

SIM SET-UP – BASIC SCREEN

Most Installations Only Need These Settings


• Circuit Naming

• Sensitivity Settings

• Relay Assignments

• Alarm Criteria

PENTAIR

SIM SETUP – MAPPING SCREEN

Graphic Mapping Display Provides Immediate Understanding of Leak Location


• Upload Image

• Set Leak Mapping Locations

PENTAIR

SIM SETUP – REGIONS SCREEN

Text Identifier for Different Areas in the Circuit - Displayed on Events Log


• Name Regions

• Assign Leak Location Distances

• Assign Alarm Relays for Remote Indication

• Assign Latching or Non-Latching Relay Operation

PENTAIR

SIM SETUP – SIM UTILITY AND ADVANCED SCREENS


• MODbus Address Assigned in the Utility Screen

• Advanced Settings Available for Troubleshooting or Special Operations–Not required for

Normal Operations

PENTAIR

SETUP – SYSTEM SCREENS

Touching Any White Box Allows Editing


PENTAIR

SETUP – ADDITIONAL SYSTEM SCREENS


• Comm Port Settings

• Clock Settings

• Password–Set Passwords–Two Access Levels

• Maintenance–View Notes–Calibrate Screen–Clear Events List–Exit the System

PENTAIR

SETUP – DEVICE NETWORK SCREENS

Indicates Devices on the Network, Where Assigned and Sets SIM MODbus Address


PENTAIR

SETUP – MAIL AND REMOTE DISPLAY

Complete Notification and Remote Access Options


• Email or Text Options

• Select What Alarms are Communicated

• Multiple Contacts Possible

• Account Setting Screen for IT Setup

• Remote Display Access

PENTAIR

HELP BUTTON

Help is Included


• Complete User Manual Available


TT-TS12 Responding to Alarms

PENTAIR

WHEN AN ALARM OCCURS …• Note the red bar for channel #11

– Also a red Acknowledge Button has appeared in the lower right corner of the Main Screen

– The Buzzer and Leak relay icons have switched to a red background

– The System summary is showing one active leak event

• Touch Acknowledge to silence the buzzer

• Touch the red bar at the top of the screen to investigate what is going on with SIM Channel #11

Any new event pops to the top of page one of the Main Screen

Main Screen



STATUS SCREEN FOR SIM #11 WITH AN ACTIVE LEAK

• Leak detected at 10 feet along the sensor cable (distances are measured outward from the SIM)

• Also note that the list of recent events has been updated to indicate the current active leak event as Event #552)

Leak location can be displayed in Feet or Meters

Status Screen


LEAK LOCATION PROJECTED ONTO REFERENCE GRAPHIC• Leak Map Tab Displays Leak Location

• The red icon indicates the location of the detected leak, superimposed on the background image.

• Image makes sense even to an untrained operator

Since the cable position and mapping references are loaded into the system during commissioning, there is no risk of a lost map or missing documentation

Leak Map Screen (with an active leak)


TT-TS12 Hardware and Connectivity

PENTAIR

TT-TS12 AT THE CENTER OF THE TRACETEK SYSTEM

NRM Multiple Relays

Host Outputs

Modbus RTU –Modbus TCP –

Email/SMS Notification –VNC Remote Viewing –

SIM-1 SIM-1A SIM-2

Wireless Nodes

ADAM 4069 Relay Output

ADAM 4015 Relay Input

Device Network


PENTAIR

STANDARD PANELS HAVE SPACE FOR 1 TO 4 TT-SIMS

Key components available as individual items or can be assembled into custom panels in any configuration

• Standard panels are ready for quick delivery and include from one to four TTSIM-1 or TTSIM-1A sensor interface modules

• A panel without any SIMs is available in a “display only” configuration (when all SIMs are mounted in remote enclosures)


PENTAIR

TT-TS12 GENERAL CAPABILITIES – DEVICE NETWORK

• Device Network can monitor and control up to 255 Modbus Slave devices:– Sensor Interface Modules: TTSIM-1, TTSIM-1A, TTSIM-2• Various sensor cables • Probes• Float Switches, Pressure Switches, similar “contact closure” type devices

– Emerson/Rosemount Smart Gateway with Type 702-61 Mesh transmitters• Up to 100 hazardous area ‘wireless mesh’ sensor cables and probes

– Relay Output Devices• ADAM-4069 Module - Default output devices used for summary relay signals and buzzer

control plus additional user programmable relays• Additional ADAM-4069 Modules – Adds additional user programmable relays in blocks of 8 at a

time• TT-NRM - WAGO based output relays in blocks of 2 to 32 per block, up to an additional 320

user programmable relays

– Relay Input Devices • ADAM-4015- Modules for connecting up to 10 digital inputs (dry contact signals)


PENTAIR

TT-TS12 GENERAL CAPABILITIES – HOST INTERFACES

• Designed to Interface with other Building or Process Control Systems

• Fits Into a Centralized Control and Monitoring Architecture

• Supports Standard Interfaces– Ethernet– RS-485

• Supports Standard Protocols–Modbus RTU–Modbus TCP

– Email/SMS Notification

– VNC Remote Viewing



TT-TS12 KEY FEATURES SUMMARY

• Intuitive touch screen operation makes setting up and operating your leak detection system intuitive and straightforward

• Detected leaks are visually displayed in their proper location, superimposed on a background graphic that assist operators with rapid recondition of the situation and the leak location to +/- 1 meter accuracy

• Event History available for up to 5000 events with archiving capability

• Scalable system allows for expansion without additional interface expense

• Wide variety of up-link possibilities for interface to host system BMS, PLC, SCADA and similar facility wide monitoring and alarm management systems


PROMOTION


PROMOTE IT!

ONLINE–Web: upgrade web pages on pentairthermal.com – UK, FR, DE – Pay-Per-Click Google campaign: water leak detection in data center– Press release to 3 portal sites: datacenterknowledge.com, …, …

OFFLINE– Press release to media in UK, FR, DE by December 2014–Datasheet, Installation & Operation manual in UK, FR, DE by Nov 12


Offer TS-12 as upgrade to TTDM-128 in existing installations

• Do you have a database of existing (TT-DM) installations?

• We can create email template which you can forward this installed base.

• What do you think?


QUESTIONS?


THANK [email protected]

[email protected]

www.pentairthermal.com

TraceTek TT-TS12 touch screen controller

Technology

Transcript of TraceTek TT-TS12 touch screen controller