1

TR SERIESLŌDRILLAD SERIESAERA

Foundation Drilling Equipment Manufacturing

2

3

ABOUT THE COMPANY ...................................................................................................................... 4

TR SERIES ...................................................................................................................................... 6

LŌDRIL ........................................................................................................................................ 12

LAD SERIES .................................................................................................................................. 18

AERA ........................................................................................................................................... 22

TABLE OF CONTENTS

4

99% OF OUR CUSTOM-BUILT FOUNDATION DRILLS ARE STILL IN USE

5

IT ALL STARTS WITH THE FOUNDATION At Bay Shore Systems, we give customers around the world the extra advantage for

extreme and conventional foundation drilling. Since 1978, we’ve custom built tough,

reliable equipment for specialty drilling contractors, utilities and transmission line

companies, and general contractors—and 99 percent of our drills are still in use today.

Our commitmentIf you ask us, there’s no “average job” in construction and excavation. Each one is a new challenge, so it’s not enough to design and manufacture one-size-fits-all products. That’s why we build to your job. Your situation. Your timeframe.

24/7 Service If there’s a problem, our industry-leading service team will help you fix it, 24 hours a day. We’re proud of the fact that 95 percent of all service issues are resolved within 24 hours. Plus, your Product Support Sales Representative is dedicated to making your equipment run as profitably for you as possible by helping you make the right maintenance and service decisions.

Sigalarm authorized distributorTo help you get the most out of your rig, we’re proud to be an authorized distributor for SigalarmTM. It’s a solid state electronic safety system for detecting proximity to energized high-voltage overhead power lines, with both audible and visual warning signals that alert the operator and ground personnel.

95% OF ALL SERVICE ISSUES ARE RESOLVED WITHIN 24 HOURS

6 TR SERIES

7

THE TR SERIES DRILL RIGS BRING POWER, DEPTH AND MORE FLEXIBILITY TO YOUR FLEETEngineered for high performance, reliability and productivity, the powerful TR Series

drills to depths of 100 feet (30 meters) and can be mounted to a truck, track or

excavator depending on the needs of your fleet.

It features comfortable, easy operation and a fully integrated kelly winch. And it’s 100 percent hydraulic with no torque converter and no transmission bringing you consistent operation from hole to hole. Some TR models come with separate side tilt and mast tilt functions to help set your rig quickly and precisely, while others have auto-level function to improve production. Look to TR for:

+ Rock drilling + Battered or raked holes

+ Typical foundation drilling + Power line and utility foundations

Truck mounted: Reduces environmental impact and costs by using truck’s engine. Leads to better visibility and reduced noise. Ease of movement from site to site with a truck base.

Track mounted: Highly efficient, with no outriggers to pull up and reset on every hole. Compact size for one load transport.

Excavator mounted: Full range and pivot of an excavator plus extra reach to get over a hole with a boom.

HYDRAULIC TORQUE UP TO AN UNSTOPPABLE 200,000 FT-LBS (270 KN-M) PLUS DRILLING DEPTHS OF UP TO 100 FEET (30 METERS)

TRUCK MOUNTED TRACK MOUNTED BOOM MOUNTED ALL TERRAIN TRACK MOUNTED

8

TR SERIES SPECS Units TR20 TR40 TR60 TR80 TR110 TR150 TR200

Rotary torque (max)ft-lbs

kN-m

21,500*

30

43,000

60

66,000

90

80,000

110

110,000

150

150,000

200

200,000

270

Kelly line winch pull (first layer, max)

lbs

kN

12,000

53

25,000*

110*

30,000*

130*

30,000*

130*

30,000

130

40,000

180

50,000*

220*

Hole diameter 1in

mm

48

1,200

84

2,100

108

2,700

132

3,300

144

3,600

168

4,200

168

4,200

Drill speed range (LHS) RPM 40/80/140* 40/80/140* 30/60/100 30/60/100 10/45/100 10/30/100 10/30/100

Hole depth (max) 2ft

m

60

18

80

24

80

24

80

24

100

30

80

24

80

24

Truck GVRW x 1000lbs

kg

50

23

60

27–

79

35

110

50– –

Truck GVW x 1000lbs

kg

45

20

50

23–

66

30

92

42– –

Excavator weight class x 1000 3lbs

kg

35-50

15-22

40-65

18-29

50-95

24-45

65-95

29-45

75-100

35-45

100

45

100-145

45-65

Truck mount PTO power (max)HP

kW

200

150

200

150–

245

180

275

205– –

HPU engine power (max)HP

kW

180*

135*

250*

158*

250

158

250

158

300

220

350

260

400

300

*With upgrade1Dependent on ground conditions, tooling and operation2Dependent on configuration 3Excavator modifications may be required or anticipated

Need more options? We’ll custom engineer the right rig for you.

TR Series upgrades

+ Square kelly bar upgrades, with a choice of three grades of material + Kelly winch upgrade to a larger winch for maximum hoisting + Add a service winch to make tool changes quick and convenient + Round, self-locking kellys to increase crowd force in hard drilling conditions

+ Reaction jack in combination with round, self-locking kellys to handle tough rock

+ Power line detector that sounds when you’re close to live overhead lines + Boom modification to maximize the size of the TR you can put on a smaller excavator

+ Telescoping boom to work out further beyond the tracks or increase crowd force and flexibility

+ Quick disconnect to easily remove the TR from the excavator

FIND THE TR SERIES RIG THAT’S RIGHT FOR YOU

9

“ OUR NEW TR RIG IS THE PERFECT COMBINATION OF POWER AND VERSATILITY. TRANSPORT AND SETUP IS EFFICIENT AND ECONOMICAL. PAIRED WITH BAY SHORE’S IMMEDIATE AND ALWAYS AVAILABLE TECHNICAL SUPPORT, IT’S TOUGH TO BEAT.” Andy Shorten, Greg Bair Track Hoe Service

10

11

12

LŌDRIL

13

LOW OVERHEAD DRILLING

THE LŌDRIL GETS YOU THE JOBS YOUR COMPETITORS CAN’T GET The LōDril® is a versatile, powerful excavator-mounted foundation drill for traditional

and extreme jobs.

Its telescoping kelly bars allow you to drill to depths of 90 feet (27 meters) under severe overhead restrictions with a very low profile attachment—even in the most unfriendly conditions. We’ll build your LōDril to the specific requirements of your job—but it’ll take you far beyond that. We’ve built more than 600 LōDrils, and 99 percent of them are still in use today, including the first one! Whether you purchase a new excavator or mount it on an existing one in your fleet, your LōDril will be engineered for the base machine that makes the most sense for you. Look to LōDril for extreme projects like:

+ Inside buildings + Large diameter holes + On slopes

+ On uneven or rough terrain + Over casing + Over obstacles

+ Under bridges + Under power lines

HYDRAULIC TORQUE UP TO 65,000 FT-LBS (95 KN-M) PLUS DRILLING DEPTHS OF UP TO 90 FEET (27 METERS)

ON SLOPE DRILLING DRILLING WITH CASING LONG AUGER DRILLING

OVER OBSTACLE DRILLING UNLEVEL TERRAIN DRILLING

14

LōDril upgrades

+ Kelly bar upgrades, with a choice of three grades of material + Kelly winch upgrade to a larger winch for maximum hoisting + Add a service winch to make tool changes quick and convenient + Round, self-locking kellys to increase crowd force in hard drilling conditions

+ Reaction jack in combination with round, self-locking kellys to handle tough rock

+ Power line detector that sounds when you’re close to live overhead lines + Boom modification to maximize the size of the LōDril you can put on a smaller excavator

+ Telescoping boom to work out further beyond the tracks or increase crowd force and flexibility

+ Quick disconnect to easily remove the LōDril from the excavator

LŌDRIL SPECS Units DH15 DH20 DH30 DH40 DH60

Rotary torque (max) 1ft-lbs

kN-m

15,000

20

21,500

30

30,000

40

43,000

60

66,000

90

Kelly winch line pull (first layer, max)

lbs

kN

8,000

35

12,000

53

18,000

80

25,000*

110*

30,000*

130*

Hole diameter 2in

mm

36

900

48

1,200

60

1,500

84

2,100

108

2,700

Drill speed range (LHS) 3 RPM 30/60/100 30/60/100 40/100/140* 30/60/100 30/60/100

Hole depth (max) 4ft

m

80

24

80

24

80

24

80

24

90

27

Attachment height 4ft

m

9-21

2.7-6.4

10-21

3.0-6.4

16-26

4.9-8.0

14-26

4.3-8.0

17-32

5.2-9.8

Excavator weight class x 1000 5lbs

kg

16-35

7-15

35-50

15-22

50-65

22-29

50-65

22-29

70-95

32-43

FIND THE LŌDRIL RIG THAT’S RIGHT FOR YOU

Need more options? We’ll custom engineer the right rig for you.

*With upgrade1Running torque at low drill speed2Dependent on ground conditions, tooling and operation3Dependent on excavator4LōDril configuration specific5Excavator modifications may be required

15

“ IF YOU WANT TO BE WOWED, THEN YOU NEED TO ADD A LŌDRIL TO YOUR FLEET.” Gene E. Sheedy, President, Midwest Drilling Foundations & Engineering, Inc.

16

17

18

LAD SERIES

19

THE LAD SERIES DRILLS GET YOU INTO TIGHT SPOTS—AND OUT AGAINThe LAD Series was specially designed to bring deep-drilling capabilities to severely

restricted-access jobs.

With attachment heights as short as 6.5 feet (2 meters), these small rigs can drill to depths of 70 feet (21 meters), combined with a wide torque range allowing you to make quick work of tough soil conditions. The LAD Series’ drilling speeds crush the competition’s, maintaining high torque ratings at higher drill speeds, significantly increasing your daily production. Compared with some other limited-access drills on the market, the LAD Series beats them on rotary torque and headroom clearance, too. Look to the LAD Series when the job isn’t easy:

+ Residential foundations + Elevator shafts + Engineered landscape projects

+ Substations + Power lines + Inside buildings

DRILL SPEEDS UP TO 100 RPM, PLUS DRILLING DEPTHS OF UP TO 70 FEET (21 METERS)

20

LAD SERIES SPECS Units LAD50 LAD80 LAD100 LAD250 LAD400

Rotary torque (max)ft-lbs

kN-m

5,000

7

8,000

11

10,000

14

25,000

34

40,000

54

Kelly winch line pull (first layer, max)

lbs

kN

5,000

22

5,000

22

8,000

35

12,000

53

18,000

80

Hole diameter 1in

mm

32

750

36

900

42

1,050

54

1,370

84

2,100

Drill speed range (LHS) RPM 20/60/100 30/60/100 30/60/100 30/60/100 30/60/100

Hole depth (max) 2ft

m

40

12

50

15

70

21

50

15

60

18

Attachment height 2ft

m

8

2.4

6.5

2

8

2.4

9.5

2.9

11

3.4

Excavator weight class x 1000 3lbs

kg

12-16

5.5-7

16-29

7-13

18-31

8-15

31-50

15-22

40-65

18-29

FIND THE LAD SERIES RIG THAT’S RIGHT FOR YOU

Need more options? We’ll custom engineer the right rig for you.

1Dependent on ground conditions, tooling and operation2Dependent on configuration3Excavator modifications may be required or anticipated

21

“ WE HAVE PUT THE LAD100 IN THE TIGHTEST SPACES AND THROUGH THE MOST TREACHEROUS TERRAIN ... THIS RIG HAS COME OUT ON TOP EVERY TIME AND PROVEN ITSELF TO BE THE MOST WIDELY USED AND PROFITABLE RIG WE OWN.” Mike Duffey, Kindness General Contractors, Inc.

22

AERA

23

ONE FLEXIBLE, POWERFUL RIG. MANY APPLICATIONS.The AERA (Articulated Earth Retention Attachment) is an excavator-mounted drilling

rig that will outperform other rigs on everything from wide open spaces to obstacles

to slopes.

Whether you need a long-stroke, single-pass machine, or a short-stroke rig to replace your conventional crawler, the AERA’s unsurpassed mast articulation, in-cab controls for comfort and endless customization options mean productivity and profits for the long haul. The AERA’s versatility can help you tackle a wide variety of profitable projects. Quick between holes and efficient over the hole, the AERA will make you raise your hand for jobs you’ve overlooked in the past. The AERA performs when tackling:

+ Micropiles + Jet grouting + Seismic retrofit

+ Tiebacks + Wick drains + Slope stabilization

+ Soil nails + Geothermal

ROTARY SPEED UP TO 100 RPM PLUS MINIMUM BENCH AS LOW AS 12 FEET (3.5 METERS)

SIDE VIEW TOP VIEWFRONT VIEW

24FIND THE AERA RIG THAT’S RIGHT FOR YOU

AERA SMALL BORE SPECS

Units 1008 1420 1430 1440

Strokeft 8 20 30 40

m 2.5 6 9 12

Minimum benchft 8 11 11 12

m 2.5 3 3 3.5

Feed system*

Type Cylinder Motor Motor Motor

Crowdlbs 6,600 12,000 12,000 12,000

kN 30 50 50 50

Pullbacklbs 6,600 12,000 12,000 12,000

kN 30 50 50 50

Mast scopeft 2 4 4 4

mm 600 1,200 1,200 1,200

Operating dimensions

Dim Aft 17.9 31.3 41.3 51.3

mm 5,455 9,590 12,590 15,635

Dim Bft 11.7 12.5 12.5 13.2

mm 3,565 3,810 3,810 4,025

Dim C degrees 210 210 210 210

Dim D degrees 95 95 95 95

Dim Eft 7.2 9.1 9.1 9.1

mm 2,195 2,775 2,775 2,775

Transport specs

Heightft 10.5 11.5 11.5 11.5

mm 3,200 3,505 3,505 3,505

Lengthft 23.7 35.5 45.5 55.5

mm 7,225 10,820 13,870 16,915

Widthft 8.5 8.5 10.5 11.1

mm 2,590 2,590 3,200 3,385

Weightlbs 35,000 58,000 62,000 66,000

kg 15,900 26,400 28,200 30,000

Excavator class

Weightlbs 20,000 30,000 40,000 40,000

kg 9,100 13,600 20,000 20,000

PowerHP 80 125 140 150

kW 59 57 64 68

25

*Specifications may be limited by excavator engine power

AERA upgrades

+ Rotary head, percussion head or double-head configuration options + Add a rotary off hole slide or rotary off axis swing to make tool installation a breeze

+ Service winch to easily handle tooling + Wide range of clamps, including blocking, breakout and pullback clamps + Inclination/stroke indicator for accurate read-outs so you’ll always produce the appropriate hole

+ Boom modifications to maximize the size of the AERA + Telescoping boom to enhance flexibility + Water pumps to flush or control dust from tooling + Hydraulic chuck for jet grouting + Rod changer to increase the depth capacity + Dual feed system for full mast lower and upper rotary feed control

Need more options? We’ll custom engineer the right rig for you.

AERA SMALL BORE ROTARY SPECS

ROTARY HEAD MODEL Units HS8 HS10 HS12 HS14 HS18

Torque (max)ft-lbs

kN-m

8,000

11

10,000

14

12,000

16

14,000

19

18,000

24

Pressure (max)psi

bar

2,900

200

4,400

300

2,400

165

3,200

220

3,500

240

Speed (max) RPM 100 100 40 60 60

Weightlbs

kg

450

205

600

270

265

120

1,000

455

1,100

500

26

“ WE HAD A PROBLEM WITH OUR RIG ON ITS MAIDEN VOYAGE: WE UNDERESTIMATED THE PRODUCTION OF THE AERA 1440. WE HAD TO MAN UP TO KEEP UP—THIS WAS A GOOD PROBLEM TO HAVE.” Kim Coffey, Beaty Construction, Inc.

28

Send us an emailSales: sales@bayshoresystems.comCustomer service: service@bayshoresystems.com

Stop by for a visitBay Shore Systems, Inc.14206 North Ohio StreetRathdrum, ID 83858bayshoresystems.com

Give us a callToll free (888) 569-3745 Local (208) 687-3311Fax (208) 687-4153New Zealand/Australia +61 408 805 757

24/7 service Toll free (888) 569-3745Local (208) 687-3311After hours (208) 446-4691

US Offices: Dallas, TX | Miami, FL | Atlanta, GA | Boston, MA | Rathdrum, ID (headquarters)

International Office: Sydney, Australia