TPC Integration P. Colas (thanks to D. Attié, M. Carty, M. Riallot, LC-TPC…) TPC layout(s)...
-
Upload
marcus-stafford -
Category
Documents
-
view
219 -
download
2
Transcript of TPC Integration P. Colas (thanks to D. Attié, M. Carty, M. Riallot, LC-TPC…) TPC layout(s)...
![Page 1: TPC Integration P. Colas (thanks to D. Attié, M. Carty, M. Riallot, LC-TPC…) TPC layout(s) Services Power dissipation Endplate thickness and cost Mechanical.](https://reader035.fdocuments.net/reader035/viewer/2022081520/5697bfdf1a28abf838cb2c50/html5/thumbnails/1.jpg)
TPC Integration
P. Colas(thanks to D. Attié, M. Carty, M. Riallot, LC-TPC…)
TPC layout(s)ServicesPower dissipationEndplate thickness and costMechanical deformations
Some work started for and after the LOI for a possible realistic design and for preparation of tools in view of integration.
![Page 2: TPC Integration P. Colas (thanks to D. Attié, M. Carty, M. Riallot, LC-TPC…) TPC layout(s) Services Power dissipation Endplate thickness and cost Mechanical.](https://reader035.fdocuments.net/reader035/viewer/2022081520/5697bfdf1a28abf838cb2c50/html5/thumbnails/2.jpg)
TPC integration
• VeryVery
GEMMicromegas
2
Resistive foil necessaryBulk process avoids framesOne high voltage3x7 mm pads (or thinner at small R)
Options: 2 GEMs, 3 GEMsFrames, at least in RFour or Six high voltages1x5 mm pads
Both technologies being successfully tested in the EUDET facility at DESY. Technology has a serious impact on realistic design and integration.Still many R&D open questions : ion feedback, electronics,…
27/01/2010
![Page 3: TPC Integration P. Colas (thanks to D. Attié, M. Carty, M. Riallot, LC-TPC…) TPC layout(s) Services Power dissipation Endplate thickness and cost Mechanical.](https://reader035.fdocuments.net/reader035/viewer/2022081520/5697bfdf1a28abf838cb2c50/html5/thumbnails/3.jpg)
ILC-TPCContinuous 3D tracking in a large gaseous volume with O(100) space points.
ILC-TPC (ILD concept)
Large prototype being tested at DESY
27/01/2010 3TPC integration
![Page 4: TPC Integration P. Colas (thanks to D. Attié, M. Carty, M. Riallot, LC-TPC…) TPC layout(s) Services Power dissipation Endplate thickness and cost Mechanical.](https://reader035.fdocuments.net/reader035/viewer/2022081520/5697bfdf1a28abf838cb2c50/html5/thumbnails/4.jpg)
About 3200 readout channelsALTRO-based electronics
(made at CERN)
27/01/2010 4TPC integration
About 2000 readout channelsAFTER-based electronics
(made in Saclay)
GEMMicromegas
![Page 5: TPC Integration P. Colas (thanks to D. Attié, M. Carty, M. Riallot, LC-TPC…) TPC layout(s) Services Power dissipation Endplate thickness and cost Mechanical.](https://reader035.fdocuments.net/reader035/viewer/2022081520/5697bfdf1a28abf838cb2c50/html5/thumbnails/5.jpg)
27/01/2010 TPC integration 5
DOUBLE GEMMicromegas
‘Bulk’ technology (CERN-Saclay) with resistive anode (Carleton)
New 100 micron GEM (plasma-etched in Japan) stretched from 2 sides.
![Page 6: TPC Integration P. Colas (thanks to D. Attié, M. Carty, M. Riallot, LC-TPC…) TPC layout(s) Services Power dissipation Endplate thickness and cost Mechanical.](https://reader035.fdocuments.net/reader035/viewer/2022081520/5697bfdf1a28abf838cb2c50/html5/thumbnails/6.jpg)
27/01/2010 6TPC integration
DOUBLE GEMMicromegas
4-layer routing (CERN) and 6-layer routing (Saclay)24x72 pads, 2.7-3.2 mm x 7 mm
8-layer routing28x176-192 pads, 1.1 mm x 5.6 mm
![Page 7: TPC Integration P. Colas (thanks to D. Attié, M. Carty, M. Riallot, LC-TPC…) TPC layout(s) Services Power dissipation Endplate thickness and cost Mechanical.](https://reader035.fdocuments.net/reader035/viewer/2022081520/5697bfdf1a28abf838cb2c50/html5/thumbnails/7.jpg)
Endplate panels
Dimensions from ‘after-Cambridge’Panel height 336 mmPanel width : from 278 to 454About 6800 pads per panel
27/01/2010 7TPC integration
![Page 8: TPC Integration P. Colas (thanks to D. Attié, M. Carty, M. Riallot, LC-TPC…) TPC layout(s) Services Power dissipation Endplate thickness and cost Mechanical.](https://reader035.fdocuments.net/reader035/viewer/2022081520/5697bfdf1a28abf838cb2c50/html5/thumbnails/8.jpg)
27/01/2010 8TPC integration
![Page 9: TPC Integration P. Colas (thanks to D. Attié, M. Carty, M. Riallot, LC-TPC…) TPC layout(s) Services Power dissipation Endplate thickness and cost Mechanical.](https://reader035.fdocuments.net/reader035/viewer/2022081520/5697bfdf1a28abf838cb2c50/html5/thumbnails/9.jpg)
27/01/2010 9TPC integration
![Page 10: TPC Integration P. Colas (thanks to D. Attié, M. Carty, M. Riallot, LC-TPC…) TPC layout(s) Services Power dissipation Endplate thickness and cost Mechanical.](https://reader035.fdocuments.net/reader035/viewer/2022081520/5697bfdf1a28abf838cb2c50/html5/thumbnails/10.jpg)
Total weight 400kg per side (with Al)
A design with 3 wheels also exists
27/01/2010 10TPC integration
![Page 11: TPC Integration P. Colas (thanks to D. Attié, M. Carty, M. Riallot, LC-TPC…) TPC layout(s) Services Power dissipation Endplate thickness and cost Mechanical.](https://reader035.fdocuments.net/reader035/viewer/2022081520/5697bfdf1a28abf838cb2c50/html5/thumbnails/11.jpg)
Micromegas 7-Module project
• A complete project including software (alignment of the modules), integrated readout, training for a pre-serie, tests and characterization in the T2K lab at CERN. Very close to a real ILC Micromegas TPC (80 modules, 4 times larger, for each side)
• Electronics development (at Saclay, with a very significant contribution from Canada):FEC, FEM, Backend.
27/01/2010 11TPC integration
![Page 12: TPC Integration P. Colas (thanks to D. Attié, M. Carty, M. Riallot, LC-TPC…) TPC layout(s) Services Power dissipation Endplate thickness and cost Mechanical.](https://reader035.fdocuments.net/reader035/viewer/2022081520/5697bfdf1a28abf838cb2c50/html5/thumbnails/12.jpg)
27/01/2010 12TPC integration
Front End Card
Same as T2K (4 AFTER chips, 4x72 channels) but much less space
In T2K, FECs are perpendicular to the pad planeLot of space is taken by the protection (double diodes, decoupling capacitors and series resistors) : may be useless for ILC (Resistive foil protects). Tests are being performed to optimize these protections.Also lots of space taken by chip packaging (silicon is 7x7mm instead of 20x20 for the packagingADC (one per card, 4 chips) can be moved to the FEM (one for all 24 chips)
Con
nect
ors
to t
he d
etec
tor
Con
nect
or t
o th
e F
EM
![Page 13: TPC Integration P. Colas (thanks to D. Attié, M. Carty, M. Riallot, LC-TPC…) TPC layout(s) Services Power dissipation Endplate thickness and cost Mechanical.](https://reader035.fdocuments.net/reader035/viewer/2022081520/5697bfdf1a28abf838cb2c50/html5/thumbnails/13.jpg)
27/01/2010 13TPC integration
Front End Cards
![Page 14: TPC Integration P. Colas (thanks to D. Attié, M. Carty, M. Riallot, LC-TPC…) TPC layout(s) Services Power dissipation Endplate thickness and cost Mechanical.](https://reader035.fdocuments.net/reader035/viewer/2022081520/5697bfdf1a28abf838cb2c50/html5/thumbnails/14.jpg)
27/01/2010 TPC integration 14
Front End Cards
Minimal space: remove most of the protections, use naked chips wire-bonded on the FEC, transfer power regulation and ADC to the mezzanine module card.
![Page 15: TPC Integration P. Colas (thanks to D. Attié, M. Carty, M. Riallot, LC-TPC…) TPC layout(s) Services Power dissipation Endplate thickness and cost Mechanical.](https://reader035.fdocuments.net/reader035/viewer/2022081520/5697bfdf1a28abf838cb2c50/html5/thumbnails/15.jpg)
27/01/2010 15TPC integration
Front End Card
1 AFTER wafer purchased (300 good chips)Make 60 cards (36 good needed) Sent to ‘debugging’ and dicing end of this month.
Bond chips (de-bonding possible). Chips can be tested only on cards. Repair cards with one dead chip.
![Page 16: TPC Integration P. Colas (thanks to D. Attié, M. Carty, M. Riallot, LC-TPC…) TPC layout(s) Services Power dissipation Endplate thickness and cost Mechanical.](https://reader035.fdocuments.net/reader035/viewer/2022081520/5697bfdf1a28abf838cb2c50/html5/thumbnails/16.jpg)
27/01/2010 16TPC integration
Front End Mezzanine
30 pinsconnector
30 pinsconnector
30 pinsconnector
30 pinsconnector
30 pinsconnector
30 pinsconnector
30 pinsconnector
30 pinsconnector
30 pinsconnector
30 pinsconnector
30 pinsconnector
30 pinsconnector
FPGAXilinx V5
ADC
SRAM
Opticalconnector
Test Pulser
XilinxProm
One per module, 1728 channels.Gathers signals from 6 FECs and sends it to the Back End through an optical link
![Page 17: TPC Integration P. Colas (thanks to D. Attié, M. Carty, M. Riallot, LC-TPC…) TPC layout(s) Services Power dissipation Endplate thickness and cost Mechanical.](https://reader035.fdocuments.net/reader035/viewer/2022081520/5697bfdf1a28abf838cb2c50/html5/thumbnails/17.jpg)
27/01/2010 TPC integration 17
Front End Mezzanine
![Page 18: TPC Integration P. Colas (thanks to D. Attié, M. Carty, M. Riallot, LC-TPC…) TPC layout(s) Services Power dissipation Endplate thickness and cost Mechanical.](https://reader035.fdocuments.net/reader035/viewer/2022081520/5697bfdf1a28abf838cb2c50/html5/thumbnails/18.jpg)
27/01/2010 TPC integration 18
![Page 19: TPC Integration P. Colas (thanks to D. Attié, M. Carty, M. Riallot, LC-TPC…) TPC layout(s) Services Power dissipation Endplate thickness and cost Mechanical.](https://reader035.fdocuments.net/reader035/viewer/2022081520/5697bfdf1a28abf838cb2c50/html5/thumbnails/19.jpg)
27/01/2010 TPC integration 19
80 modules each side.For each module (6800 channels) : 1 HV cable1 double optical fibre1 low-voltage 32A cable160 W to remove (becomes negligeable is power pulsing can be fully implemented.
![Page 20: TPC Integration P. Colas (thanks to D. Attié, M. Carty, M. Riallot, LC-TPC…) TPC layout(s) Services Power dissipation Endplate thickness and cost Mechanical.](https://reader035.fdocuments.net/reader035/viewer/2022081520/5697bfdf1a28abf838cb2c50/html5/thumbnails/20.jpg)
TPC Support
27/01/201020TPC integration
4 configurations
Case 1
Case 3
Case 2
Case 4
![Page 21: TPC Integration P. Colas (thanks to D. Attié, M. Carty, M. Riallot, LC-TPC…) TPC layout(s) Services Power dissipation Endplate thickness and cost Mechanical.](https://reader035.fdocuments.net/reader035/viewer/2022081520/5697bfdf1a28abf838cb2c50/html5/thumbnails/21.jpg)
TPC V1 - ∆P= 0 – Results
27/01/2010 21TPC integration
Case 1
Case 3
Case 2
Case 4
![Page 22: TPC Integration P. Colas (thanks to D. Attié, M. Carty, M. Riallot, LC-TPC…) TPC layout(s) Services Power dissipation Endplate thickness and cost Mechanical.](https://reader035.fdocuments.net/reader035/viewer/2022081520/5697bfdf1a28abf838cb2c50/html5/thumbnails/22.jpg)
TPC V1 - ∆P= 10 – Results
27/01/201022TPC integration
Case 1
Case 3
Case 2
Case 4
![Page 23: TPC Integration P. Colas (thanks to D. Attié, M. Carty, M. Riallot, LC-TPC…) TPC layout(s) Services Power dissipation Endplate thickness and cost Mechanical.](https://reader035.fdocuments.net/reader035/viewer/2022081520/5697bfdf1a28abf838cb2c50/html5/thumbnails/23.jpg)
TPC V1 vs V2
27/01/2010 23TPC integration
Deflection (mm)∆P = 0 mbar ∆P = 10 mbar
Case 1V1 0.2 0.45V2 0.18 0.42∆ -10% -7%
Case 2V1 0.13 0.43V2 0.13 0.4∆ 0% -7%
Case 3V1 0.13 0.4V2 0.13 0.36∆ 0% -10%
Case 4V1 0.09 0.21V2 0.09 0.21∆ 0% 0%
Dé
form
atio
n V
1 -
∆P
= 0
mb
ar
Dé
form
atio
n V
2 -
∆P
= 0
mb
ar
![Page 24: TPC Integration P. Colas (thanks to D. Attié, M. Carty, M. Riallot, LC-TPC…) TPC layout(s) Services Power dissipation Endplate thickness and cost Mechanical.](https://reader035.fdocuments.net/reader035/viewer/2022081520/5697bfdf1a28abf838cb2c50/html5/thumbnails/24.jpg)
CONCLUSIONS
27/01/2010 24TPC integration
A realistic design for the TPC is being worked on. It is very technology-dependent and still open questions need R&D (ion backflow, electronics).The work will be pursued with tools being prepared (M. Carty, R. Volkerborn, AIDA DESY-Saclay?)
The Micromegas 7-module project should demonstrate the possibility of reading out the PCB with 30 mm - thick electronics, making a 100 mm endplate space possible.
The bottleneck is now bringing Low-Voltage and removing heat (correlated problems).