TP 65-30/4-A-F-A-BQQE 400Y 50HZ - Lenntech · Printed from Grundfos Product Centre [2018.02.043]...
Transcript of TP 65-30/4-A-F-A-BQQE 400Y 50HZ - Lenntech · Printed from Grundfos Product Centre [2018.02.043]...
GRUNDFOS DATA BOOKLET
TP 65-30/4-A-F-A-BQQE 400Y 50HZ Grundfos Pump 98436173
Thank you for your interest in our productsPlease contact us for more information, or visit our websitehttps://www.lenntech.com/grundfos/TP000/98436173/TP-65-30-4-A-F-A-BQQE.html
[email protected]. +31-15-261.09.00fax. +31-15-261.62.89
BE > THINK > INNOVATE
Printed from Grundfos Product Centre [2018.02.043]
Position Qty. Description1 TP 65-30/4 A-F-A-BQQE
Product No.: 98436173
Single-stage, close-coupled, volute pump with in-line suction and discharge ports of identical diameter.The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can beremoved for maintenance or service while the pump housing remains in the pipework.The pump is fitted with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756.Pipework connection is via PN 6/10 DIN flanges (EN 1092-2 and ISO 7005-2).The pump is fitted with a fan-cooled asynchronous motor.
Further product detailsThe product's minimum efficiency index (MEI) is greater or equal to 0.70. This is by the CommissionRegulation (EU) considered as an indicative benchmark for best-performing water pump available onthe market as from 1 January 2013.
PumpPump housing and pump head are electrocoated to improve the corrosion resistance.Electrocoating includes:1) Alkaline-based cleaning.2) Pretreatment with zinc phosphate coating.3) Cathodic electrocoating (epoxy).4) Curing of paint film at 200-250 °C.
1: Pump housing2: Impeller3: Shaft4: Coupling5: Pump head
The pump housing is provided with a replaceable stainles steel/PTFE neck ring to reduce the amount ofliquid running from the discharge side of the impeller to the suction side. The impeller is secured with asplit cone with nut.
The pump is fitted with an unbalanced rubber bellows seal with torque transmission across the springand around the bellows. Due to the bellows, the seal does not wear the shaft, and the axial movementis not prevented by deposits on the shaft.Primary seal:
- Rotating seal ring material: Silicon carbide (SiC)- Stationary seat material: Silicon carbide (SiC)
This material pairing is used where higher corrosion resistance is required. The high hardness of thismaterial pairing offers good resistance against abrasive particles.Secondary seal material: EPDM (ethylene-propylene rubber)EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.
Printed from Grundfos Product Centre [2018.02.043]
A circulation of liquid through the duct of the air vent screw ensures lubrication and cooling of the shaft seal.
The flanges have tappings for mounting of pressure gauges.
The motor stool forms connection between the pump housing and the motor, and is equipped with amanual air vent screw for venting of the pump housing and the shaft seal chamber. The sealingbetween motor stool and pump housing is an O-ring.The central part of the motor stool is provided with guards for protection against the shaft and coupling.Motor and pump shaft are connected via a rigid two-part coupling.
MotorThe motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN standards.Electrical tolerances comply with IEC 60034.
The motor is flange-mounted with tapped-hole flange (FT).Motor mounting designation in accordance with IEC 60034-7: IM B 14, IM V 18 (Code I) / IM 3601, IM3611 (Code II).
The motor does not incorporate motor protection and must be connected to a motor-protective circuitbreaker which can be manually reset. The motor-protective circuit breaker must be set according to therated current of the motor (I1/1).
Technical data
Liquid:Pumped liquid: WaterLiquid temperature range: -25 .. 120 °CLiquid temperature during operation: 20 °CDensity: 998.2 kg/m³
Technical:Speed for pump data: 1450 rpmRated flow: 21.4 m³/hRated head: 2.01 mActual impeller diameter: 95 mmPrimary shaft seal: BQQECurve tolerance: ISO9906:2012 3B
Materials:Pump housing: Cast iron
EN-JL1040ASTM A48-40 B
Impeller: Stainless steelDIN W.-Nr. 1.4301AISI 304
Installation:Range of ambient temperature: -30 .. 40 °CMaximum operating pressure: 10 barFlange standard: DINPipe connection: DN 65Pump inlet: DN 65Pump outlet: DN 65Pressure rating: PN 6/10Port-to-port length: 340 mmFlange size for motor: FT85
Electrical data:Motor type: 71ARated power - P2: 0.25 kWPower (P2) required by pump: 0.25 kWMains frequency: 50 HzRated voltage: 3 x 220-240D/380-415Y VRated current: 1,48/0,85 AStarting current: 400-440 %
Printed from Grundfos Product Centre [2018.02.043]
Position Qty. DescriptionCos phi - power factor: 0,75-0,65Rated speed: 1400-1420 rpmEfficiency: 61,5% - 68,5%Motor efficiency at full load: 61.5-68.5 %Motor efficiency at 3/4 load: 70 %Motor efficiency at 1/2 load: 63.9 %Number of poles: 4Enclosure class (IEC 34-5): 55 Dust/JettingInsulation class (IEC 85): F
Others:Minimum efficiency index, MEI ≥: 0.70ErP status: EuP Standalone/Prod.Net weight: 33.1 kgGross weight: 36.7 kgShipping volume: 0.16 m³Danish VVS No.: 38 1824.030Norwegian NRF no.: NRF NO 9043572
Printed from Grundfos Product Centre [2018.02.043]
98436173 TP 65-30/4 50 HzH
[m]
0.0
0.5
1.0
1.5
2.0
2.5
3.0
Q [m³/h]0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30
eta[%]
0
20
40
60
80
100
TP 65-30/4, 3*400 V, 50Hz
P[W]
0
50
100
150
200
250
NPSH[m]
0
1
2
3
4
5P1
P2
Printed from Grundfos Product Centre [2018.02.043]
H[m]
0.0
0.5
1.0
1.5
2.0
2.5
3.0
Q [m³/h]0 5 10 15 20 25
eta[%]
0
20
40
60
80
100
TP 65-30/4, 3*400 V, 50Hz
P[W]
0
50
100
150
200
250
NPSH[m]
0
1
2
3
4
5P1
P2
9713
5
423
34065
M16
RP 1/4
109120 120
141
160
170
120 100
DIRECTION OF ROTATION
HIGH VOLTAGEDIRECTION OF ROTATION
LOW VOLTAGE
98.3
169L1
L2L3
L1L2
L3
Description ValueGeneral information:Product name: TP 65-30/4 A-F-A-BQQEProduct No: 98436173EAN number: 5711494970483Technical:Speed for pump data: 1450 rpmRated flow: 21.4 m³/hRated head: 2.01 mHead max: 30 dmActual impeller diameter: 95 mmPrimary shaft seal: BQQECurve tolerance: ISO9906:2012 3BPump version: AModel: AMaterials:Pump housing: Cast iron
EN-JL1040ASTM A48-40 B
Impeller: Stainless steelDIN W.-Nr. 1.4301AISI 304
Material code: AInstallation:Range of ambient temperature: -30 .. 40 °CMaximum operating pressure: 10 barFlange standard: DINConnect code: FPipe connection: DN 65Pump inlet: DN 65Pump outlet: DN 65Pressure rating: PN 6/10Port-to-port length: 340 mmFlange size for motor: FT85Liquid:Pumped liquid: WaterLiquid temperature range: -25 .. 120 °CLiquid temperature during operation: 20 °CDensity: 998.2 kg/m³Electrical data:Motor type: 71ARated power - P2: 0.25 kWPower (P2) required by pump: 0.25 kWMains frequency: 50 HzRated voltage: 3 x 220-240D/380-415Y VRated current: 1,48/0,85 AStarting current: 400-440 %Cos phi - power factor: 0,75-0,65Rated speed: 1400-1420 rpmEfficiency: 61,5% - 68,5%Motor efficiency at full load: 61.5-68.5 %Motor efficiency at 3/4 load: 70 %Motor efficiency at 1/2 load: 63.9 %Number of poles: 4Enclosure class (IEC 34-5): 55 Dust/JettingInsulation class (IEC 85): FMotor protec: NONEMotor No: 86805101Others:Minimum efficiency index, MEI ≥: 0.70ErP status: EuP Standalone/Prod.Net weight: 33.1 kgGross weight: 36.7 kgShipping volume: 0.16 m³Danish VVS No.: 38 1824.030
34065
M16
RP 1/4
109
120120
141
170
120100
Printed from Grundfos Product Centre [2018.02.043]
Description ValueNorwegian NRF no.: NRF NO 9043572
Printed from Grundfos Product Centre [2018.02.043]
98436173 TP 65-30/4 50 Hzcos phi
eta
0.0
0.2
0.4
0.6
0.8
P2 [kW]0 0.02 0.04 0.06 0.08 0.10 0.12 0.14 0.16 0.18 0.20 0.22 0.24 0.26 0.28 0.30
I[A]
0.0
0.2
0.4
0.6
0.8
TP65-30/4 + 71A 0.25 kW 3*400 V, 50 Hz
eta
cos phi
I
n[rpm]
1000
1100
1200
1300
1400
P1[kW]
0.00
0.10
0.20
0.30
0.40n
P1
Printed from Grundfos Product Centre [2018.02.043]
98436173 TP 65-30/4 50 Hz
Note! All units are in [mm] unless others are stated.Disclaimer: This simplified dimensional drawing does not show all details.
9713
5
423
34065
M16
RP 1/4
109120 120
141
160
170
120 100
Printed from Grundfos Product Centre [2018.02.043]
98436173 TP 65-30/4 50 Hz
Note! All units are in [mm] unless others are stated.
DIRECTION OF ROTATION
HIGH VOLTAGEDIRECTION OF ROTATION
LOW VOLTAGE
98.3
169L1
L2L3
L1L2
L3
Disclaimer: The information about the Grundfos pump in this document may be outdated.Data may be subject to alterations without further notice.Please contact us to verify the data above is still accurate/up-to-date.
All information is copyright Grundfos.
[email protected]. +31-15-261.09.00fax. +31-15-261.62.89