WELDED-STYLE (S) OR FLANGED CONNECTION (B) ROTATING UNION

TP 1100 S / TP 1100 B

1100

S/B

SER

IES TP 1100 S / TP 1100 B

For positioning use or non-continuous slow rotation processes.

• Welded-style (TP 1100 S) or flanged connection (TP 1100 B) as standard.

• Composite type U facial sealing system.

• Standard sizes available: 1" to 24" (other dimensions on request).

• Field of application: arms for fluid transfer operations, articulated equipment and transfer of sludge.

• Positioning in rotation is ensured by double row ball bearing allowing higher resistance to external tension loads.

OPERATING CONDITIONS

Adjustable rotating union union that can be combined with other external parts

(piping, flanges, elbows...)

• Available in 2 distinct materials : carbon steel and type 316L stainless steel.

WELDED-STYLE (S) OR FLANGED CONNECTION (B)ROTATING UNION

• Leakage detector next to main seal, grease fitting and vent hole as standard.

PRODUCT REFERENCE MATERIAL SIZE

BAR

RESISTANCE TO EXTERNAL TENSION

LOADS

TP 1100 STP 1100 B

Carbon steel

1" to 2"1/2 40 bar (580 Psi) max.

120°C (248°F) max.

15 RPM max. NON-

CONTINOUOUS ROTATION

• Chemicals • Gas

• Hydrocarbon • Non abrasive liquid

On request :• Abrasive liquid

• Vacuum

Good

3" to 6" 30 bar (435 Psi) max.

8" to 10" 15 bar (218 Psi) max.

12" to 16" 10 bar (145 Psi) max.

18" to 24" 3 bar (44 Psi) max.

Type 316L stainless

steel

1" to 2"1/2 30 bar (435 Psi) max.

120°C (248°F) max.

15 RPM max. NON-

CONTINOUOUS ROTATION

3" to 6" 20 bar (290 Psi) max.

8" to 10" 10 bar (145 Psi) max.

12" to 24" 2 bar (29 Psi) max.

Other applications on request

+

SIZE AND WEIGHT

SERVICING

N° PART1 Shaft

2 Housing

3 Flanges

4 Balls

5 Main seal

6 O ring

7 Grease fitting

8 Ball cap

9 Screw

NPS ØA ØB C ØD C' ØD' G FLANGE PN10 /PN16

WEIGHT (NO FLANGES)

WEIGHT (FLANGES)

25 27 59 85 33 161 115 4 x Ø14 CDD 85 0,9 kg 2,7 kg

32 35 68 85 42 165 140 4 x Ø18 CDD 100 1,1 kg 4,6 kg

40 41 78 92 48 176 150 4 x Ø18 CDD110 1,6 kg 5,6 kg

50 52 90 92 60 182 165 4 x Ø18 CDD 125 2 kg 6,8 kg

65 63 103 94 73 184 185 4 x Ø18 CDD 145 2,6 kg 8,7 kg

80 78 119 96 89 196 200 8 x Ø18 CDD 160 3,2 kg 10,6 kg

100 102 144 96 114 200 220 8 x Ø18 CDD 180 4,1 kg 12,6 kg

125 128 175 101 141 211 250 8 x Ø18 CDD 210 6,1 kg 16,8 kg

150 154 202 101 168 211 285 8 x Ø22 CDD 240 7,4 kg 23,2 kg

200 203 253 111 219 235 340 8 x Ø22 / 12 x Ø22 CDD 295 10,5 kg 33 kg

250 254 313 117 273 257 405 12 x Ø22 / 12 x Ø26 CDD 350 / 355 15,8 kg 51,2 kg

300 305 363 122 324 278 460 12 x Ø22 / 12 x Ø26 CDD 400 / 410 19,3 kg 65,9 kg

350 333 405 142 355 396 533 16 x Ø22 / 16 x Ø26 CDD 460 / 470 30,2 kg 128 kg

400 381 456 147 406 401 597 16 x Ø26 / 16 x Ø30 CDD 515 / 525 38,1 kg 162 kg

450 429 507 152 457 431 635 20 x Ø26 / 20 x Ø30 CDD 565 / 585 47,4 kg 195 kg

500 478 558 167 508 456 698 20 x Ø26 / 20 x Ø33 CDD 620 / 650 58,6 kg 243 kg

600 574 659 172 609 476 813 20 x Ø30 / 20 x Ø36 CDD 725 / 770 77,5 kg 337 kg

3275984613

PACQUET rotating unions are greased, tested and ready for use when they leave the factory. The rotating unions coming without grease fittings are lubricated for life. Servicing merely consists in routine inspections checking for potential leaks. When the rotating unions are supplied with grease fittings, we highly recommend to use high quality ball-bearing grease (ORAPI ® NANO LUBRICANT 201). Greasing frequency depends on rotational speed, temperature and general operating conditions.

Our products are machined and assembled with the highest precision. Inadequate installation, misuse or poor servicing may cause premature wear of the seals and/or bearings. Sealing is achieved using components liable to wearing. Regular inspection is necessary to take action as soon as signs of leakage occur. Please do not keep on using a leaking rotating union.Further information on our products guarantee and conditions of use is available on our website.

USE INSTRUCTIONS

You can download your operating and instruction manual from our website: www.raccordtournant-pacquet.com

For any further information, please contact us.

Sizes in millimeters

PACQUET RACCORD TOURNANTRoute de Rexpoëde - 59122 KILLEM (FRANCE)

Phone : +33 (0)3 28 68 86 86 contact@prt.pacquet.eu - www.raccordtournant-pacquet.com

Groupe PACQUET INDUSTRIE

SERIES RESISTANCE

TO EXTERNAL TENSION

LOADS

THR

EAD

ED

TP 500All

non-abrasive(vacuum on

request)

1/2" - 3/4" 1"

(others on request)

Up to12 bar

(174 Psi)

Positioning or non-continuous

slow rotation

80°C(176°F) Good

TP 1000All

non-abrasive(vacuum on

request)

1/4" to 4"(others on request)

Up to 30 bar

(435 Psi)

Non-continuous slow rotation

180°C(356°F) Good

TP 1000PLUS

All (abrasive and

vacuum on request)

1/4" to 4"(others on request)

Up to 150 bar

(2175 Psi)

Non-continuous moderate speed

(continuous rotation subject to

conditions)

140°C(284°F) High

TP 1000HP

All (abrasive and

vacuum on request)

1/4" to 4"(others on request)

Up to 320 bar

(4641 Psi)

Non-continuousslow rotation

(continuous rotation subject to

conditions)

60°C(140°F) High

TP 2000All

(abrasive and vacuum on

request)

1/4" to 2"(others on request)

Up to 350 bar

(5076 Psi)

Positioning or non-continuous

slow rotation

80°C(176°F) High

TP 3000All

(except vacuum and

gas)

1/2" to 3"(others on request)

Up to 60 bar

(870 Psi)

High-speed rotation

(up to 1600 RPM)

80°C(176°F) Good

WEL

DED

FLA

NG

ED

TP 1100 F Liquid foodstuffs

SMS25 to SMS104

(others on request)

Up to 40 bar

(580 Psi)

Positioning or non-continuous

slow rotation

120°C(248°F) Good

TP 1100 S TP 1100 B

All (abrasive and

vacuum on request)

1" to 24"(others on request)

Up to 40 bar

(580 Psi)

Non-continuous slow rotation

120°C(248°F) Good

TP 1900 S TP 1900 B

All (abrasive and

vacuum on request)

2" to 8"(others on request)

Up to 60 bar

(870 Psi)

Non-continuousslow rotation

(continuous rotation - please contact us)

120°C(248°F) High

CUST

OM

SO

LUTI

ON

S TP 6000 Hydraulic fluid On request

300 bar (4351 Psi) and over

High-speed rotation

(up to 1600 RPM)

80°C(176°F) Good

TP 8000All

(except abrasive)

On request Defined by application

Defined by application

Defined by application

Altered by used material

Available in anodised aluminium, carbon steel + anticorrosion coating, type 316L stainless steel or martensitic stainless steel - see our products references.Materials, sealing system and union size can alter maximum operating conditions.Sizes and data are for reference only and are subject to change. For any specific request, please contact us.Sizes in millimeters.Temperature, pressure and speed are all independent criteria. Please do not cumulate maximum operating conditions.

SIZE

BAR