TOTAL EDEN PLUMBING CATALOGUE · TOTAL EDEN PLUMBING CATALOGUE ... Cast Iron Water Fittings 74 ......

TOTAL EDEN PLUMBING CATALOGUE• Fire Protection Systems

• Drainage Systems

• Commercial Hot Water Systems

• Acoustic Lagging

• Gas Piping Systems

• Stormwater Pipe and Fittings

• PVC Pressure Pipe and Fittings

• Industrial Piping Systems

• Valves

• Poly Pipe and Fittings

• Electrical

WWW.TOTALEDEN.COM.AUBringing Water to Life1300 654 040

PLUMBING CATALOGUETELEPHONE 1300 65 40 40 3

DRAINAGE SYSTEMS

PLUMBING CATALOGUETELEPHONE 1300 65 40 40

CONTENTSFIRE PROTECTION 2Blazemaster cPVC Fire Sprinkler System 3

DRAINAGE SYSTEMS 6Valsir Triplus Acoustic Drainage Systems 7

Valsir HDPE Drainage Systems 13

Butt-head PVC Fittings 20

PVC DWV Pipe and Fittings 24

Clips and Saddles 29

Non Pressure Solvent Cement and Primers 30

Consumables 30

SewerPRO and SewerMAX Pipe 31

Vortex Flow - Inserts for Sewer Odour and Corrosion Control 31

HOT & COLD WATER AND GAS SYSTEMS 32Copper Pipe and Fittings 32

Copper Press-Fit Fittings 34

Commercial Hot Water Units 40

STORMWATER SYSTEMS 41Valsir Rainplus Siphonic System 42

PVC Stormwater Pipe and Fittings 44


Consumables 47

BlackMAX and StormPRO Pipe and Fittings 48

Drain Pipe and Fittings 49

Pits and Drains 50

Drainage and Rain Water Outlets 51

PVC PRESSURE PIPE AND FITTINGS 64PVC Pressure Pipe 65

PVC Pressure Fittings 66


Solvent Cements, Primers and Consumables 73

WATERMAIN PRESSURE PIPE AND FITTINGS 74PVC Watermain Pressure Pipe 74

Cast Iron Water Fittings 74

INDUSTRIAL PIPING SYSTEMS 77SCH 80 - Industrial Grey PVC Pipe and Fittings 78

Corzan cPVC Industrial Pipe and Fittings 82

Ipex Double Containment System 86


Industrial Hose 87

Butt-Head Camlocks 88

PP Camlocks 94

PP Threaded Fittings 95

PP Barbed Fittings 97

Tank Outlets and Gaskets 98

Pressure Solvent Cement, Primers and Consumables 99

VALVES 100Plastic Valves 101

FIP Plastic Valves 103

Metal Valves 108

POLY PRESSURE PIPE AND FITTINGS 109PE Pressure Pipe - Coils 110

PE Pressure Pipe - Straight Lengths 111

PE80 Gas Pipe 111

Plasson Electrofusion Fittings 112

Plasson Compression Fittings - Metric 112

Tapping Saddles - Mechanical 119

Imperial / Rural Poly Pipe and Fittings 120

PE Buttweld Fittings - PN16, SDR11 122

PE Buttweld Fittings - PN10, SDR17 123

ELECTRICAL PRODUCTS 128Conduit and Fittings 129

Solvent Cements, Primers and Consumables 131

WATER TANKS 133Metal and Plastic Water Tanks 133

PUMPS 134Pumps - Domestic, Commercial and Industrial 134

TABLES AND CONVERSIONS 135Relevant Tables and Dimensions 135

PLUMBING CATALOGUE TOTALEDEN.COM.AU2

FIRE PROTECTION

Ease of jointing on-site provides unmatched flexibilityLight weight – effortless installation and handling on-siteEliminates scaling and corrosion for long lasting performance even in salt air environments Low flame and smoke characteristicsMinimal maintenance costsMinimal tool investment generates increased cost savingsUL/LPC fire tested and listed

FIRE SPRINKLER SYSTEMS

BLAZEMASTER® CPVC FIRE SPRINKLER SYSTEMSBlazeMaster cPVC fire sprinkler pipe and fittings is an easy-to-use alternative to traditional metal fire sprinkler systems. Utilising its cold weld joining system, there's no need for threading machines or oxy acetylene welders meaning BlazeMaster cPVC is ideal for those tough-to-get-at areas in new and retrofit applications. BlazeMaster's flexibility allows for quick, quiet and clean installation.

From a long-term reliability standpoint, BlazeMaster cPVC pipe and fittings also offers corrosion resistance (including resistance to Microbiologically Influenced Corrosion/MIC), superior hydraulics, high heat tolerances and lower flame and smoke characteristics.

Benefits of using Blazemaster cPVC:

Approved by Australian Standards: AS2118.9 - 1995 Section 7 and AS4118.2.1 - 1995 Section 5 for residential, domestic and light hazard fire sprinkler systems.

Pegasus Resort Hotel406 unit high risedevelopment.Broadbeach, Gold Coast.

Blazemaster usedthroughout.

Circle on Cavil67 and 47 storey residentialtowers - Surfers Paradise,Queensland.

Blazemaster usedthroughout.


FIRE PROTECTION

CAT 10 45O ELBOWSDESCRIPTION CODE

20MM 100405659

25MM 100405660

32MM 100405661

40MM 100405662

50MM 100405663

65MM 100405664

CAT 6 END CAPSDESCRIPTION CODE

20MM 100401526

25MM 100401527

32MM 100401528

40MM 100401529

50MM 100401530

65MM 100401531

CAT 7 COUPLINGSDESCRIPTION CODE

20MM 100403686

25MM 100403687

32MM 100403688

40MM 100403689

50MM 100403690

65MM 100403691

CAT 8 REDUCING COUPLINGSDESCRIPTION CODE

25MM x 20MM 100403975

32MM x 25MM 100403976

40MM x 25MM 100403977

40MM x 32MM 100403978

50MM x 40MM 100403979

BLAZEMASTER CPVC FIRE SPRINKLER SYSTEMPIPE - 4.5M LENGTHS

DESCRIPTION BOX QTYS CODE

20MM 28 100414321

25MM 15 100414322

32MM 10 100414323

40MM 7 100414324

50MM 5 100414325

65MM 3 100414326

FI SOCKETS - NPTDESCRIPTION CODE

20MM x 3/4" 100419513

25MM x 1" 100419520

32MM x 1 1/4" 100419521

40MM x 1 1/2" 100419522

50MM x 2" 100419523

FI SOCKETS - BSPDESCRIPTION CODE

25MM x 1" 100419516

32MM x 1 1/4" 100419517

40MM x 1 1/2" 100419518

50MM x 2" 100419519

FI SPRINKLER HEAD SOCKETSDESCRIPTION CODE

20MM x 1/2" - NPT 100419514

25MM x 1/2" - NPT 100419524

25MM x 3/4" - NPT 100419515

CAT 5 REDUCING BUSHESDESCRIPTION CODE

25MM x 20MM 100400541

32MM x 20MM 100400542

32MM x 25MM 100400543

40MM x 20MM 100400544

40MM x 25MM 100400545

40MM x 32MM 100400546

50MM x 20MM 100400547

50MM x 25MM 100400548

50MM x 32MM 100400549

50MM x 40MM 100400550

65MM x 50MM 100400551

GROOVED ADAPTORSDESCRIPTION CODE

50MM 100397746

40MM 100398087


FIRE PROTECTION

BARREL UNIONDESCRIPTION CODE

25MM 100398771

FIRE COLLARS TO SUIT BLAZEMASTERDESCRIPTION CODE

UNICOLLAR - SUITS 25MM BM 100407021

FLANGED FC40 - 32MM BM 100407025




BLAZEMASTER CPVC FIRE SPRINKLER SYSTEMCAT 13 90O ELBOWS

DESCRIPTION CODE

20MM 100405879

25MM 100405880

32MM 100405881

40MM 100405882

50MM 100405883

65MM 100405884

CAT 19 TEESDESCRIPTION CODE

20MM 100422657

25MM 100422658

32MM 100422659

40MM 100422660

50MM 100422661

65MM 100422662

REDUCING TEESDESCRIPTION CODE

25MM x 20MM-C x 20MM 100423292

25MM x 25MM-C x 20MM 100423293

32MM x 25MM-C x 25MM 100423295

32MM x 32MM-C x 20MM 100423294

32MM x 32MM-C x 25MM 100423296

40MM x 40MM-C x 20MM 100423297

40MM x 40MM-C x 25MM 100423298

40MM x 40MM-C x 32MM 100423299

50MM x 50MM-C x 20MM 100423300

50MM x 50MM-C x 25MM 100423301

50MM x 50MM-C x 32MM 100423302

50MM x 50MM-C x 40MM 100423303

65MM x 65MM-C x 50MM 100423304

CROSSESDESCRIPTION CODE

20MM 100404305

25MM 100404306

32MM 100404307

40MM 100404308

50MM 100404309

CAT 16 FLANGESDESCRIPTION CODE

40MM CLASS 125/150 100407261

50MM CLASS 125/150 100407262

SPRINKLER HEAD TEESDESCRIPTION CODE

20MM x 20MM x 1/2" - NPT 100423339

25MM x 20MM x 1/2" - NPT 100423340

25MM x 25MM x 1/2" - NPT 100423341

32MM x 32MM x 1/2" - NPT 100423342

40MM x 40MM x 1/2" - NPT 100423343

50MM x 50MM x 1/2" - NPT 100423344

90O SPRINKLER HEAD ELBOWSDESCRIPTION CODE

20MM x 1/2" 100406032

25MM x 1/2" 100406034

25MM x 3/4" 100406033

32MM x 1/2" 100406035


FIRE PROTECTION

ACCESSORIESDESCRIPTION CODE

DYNASET KNOCK IN x 50 100405381

KNOCK-IN ANCHORS M5 x 33 100411835

KNOCK-IN ANCHORS M5 x 25 2521995

PTFE TAPE 15MM x 6.6M BLAZEMASTER

100493842

THREAD SEALANT BLUE SEAL 473ML

100493843

SADDLES & CLIPS - GALVANISEDDESCRIPTION CODE

20MM SADDLE UL 100421400





to 20MM CLIP SIDE MOUNT UL 100421405

25MM CLIP SIDE MOUNT UL 100421406




25MM NUT CLIP UL FOR CPVC 100421406




BLAZEMASTER CPVC FIRE SPRINKLER SYSTEMDE-BURRING TOOLS

DESCRIPTION CODE

12MM - 40MM 100423617

40MM - 75MM 100423618

PIPE CUTTERDESCRIPTION CODE

6MM - 67MM 100414266

WHEEL TO SUIT CUTTER 100426644

1 STEP CPVC SOLVENT CEMENTDESCRIPTION CODE

473ML 100420259

976ML 100420260

FIRE STOP SEALANTDESCRIPTION CODE

3M 3000WT FIRESTOP SEALANT 300ML TUBE

100429334

600ML SAUSAGE 100467130

RESIDENTIAL VALVE & CABINETSDESCRIPTION CODE

TOTALEDEN.COM.AUPLUMBING CATALOGUE6

DRAINAGE SYSTEMS

DRAINAGE SYSTEMS

• Valsir Triplus Acoustic Drainage System

• Valsir HDPE Drainage System

• Drain Waste & Vent (DWV) Pipe and Fittings

• Clips and Accessories

• Non Pressure Solvent Cements and Primers

• SewerPRO Polypropylene Corrugated Pipe: 150-900mm

• SewerMAX Polypropylene Corrugated Pipe: 225-600mm

PVC Drain Waste & Vent (DWV) non pressure pipes and fittings are available in diameters ranging from 40mm to 375mm. Total Eden stock the full range of pipes, fittings and accessories which cover most requirements and are suitable for use in residential, commercial and industrial applications.

Total Eden is the exclusive Australian distributor of Valsir Triplus, HDPE and Poly pipe fittings; which are suited to sanitary and trade waste plumbing applications. These specialised systems are at the forefront of current technology with unique properties that cover most drainage applications presented in today’s commercial buildings.

Many architects, hydraulic engineers, builders and commercial plumbers are choosing Valsir Triplus and HDPE as a way of delivering higher quality results than conventional systems can deliver.

We provide drainage solutions for a variety of applications including extreme temperatures, chemicals, laboratory, food industry, sewer waste and greasy/acid/alkali applications. So whatever your requirements, we have it covered.


DRAINAGE SYSTEMS

Cert No: WMK25784AS/NZS 7671 : 2010



TOTALEDEN.COM.AUPLUMBING CATALOGUE

TRIPLUS - THE LATEST IN ACOUSTIC DRAINAGEThe most effective way to meet the Building Code of Australia’s strict requirements for sound insulation standards for habitable rooms.

Triplus is a triple layered polypropylene acoustic piping system for soundproofing in waste and drainage applications. It is ideally suited to high rise buildings requiring the National Construction Code’s minimum noise levels. It is lightweight and has a simple push fit rubber ring joint system that enables quick and safe installation.

The benefits of Triplus include:• Acoustically inherent sound insulating properties - no lagging required.• Suitable for hot water discharges up to 95°C.• Suitable for a range of chemicals and greasy waste - PH values between 2 and 12.• Push Fit Rubber Ring Joint - requires no solvents or welding in the joining process.• Faster installation times compared to traditional lagging methods.• Lightweight - effortless installation and handling on site.• Triplus is available in diameters ranging from 40 to 160mm with a comprehensive range

of fittings including bends, traps, junctions, vent branches and anti-vibration clips. Triplus acoustic performance will not change for the life of the building, giving engineers and devel-opers peace of mind well beyond construction.

• Triplus is manufactured from 'green friendly' polypropylene and is ideal for 'Green Star' buildings.

Valsir Triplus is exclusive to Total Eden - For enquiries contact our Customer Service on 1300 65 40 40.


DRAINAGE SYSTEMS

87O BENDSDESCRIPTION CODE

40MM 100399946

50MM 100399947

75MM 100399948

110MM 100399943

160MM 100403344

87O SWEEP BENDSDESCRIPTION CODE

40MM 100508941

50MM 100508942

75MM 100508943

110MM 100508944


40MM 100399930

50MM 100399931

75MM 100399932

110MM 100399929


40MM 100399936

50MM 100399937

75MM 100399938

110MM 100399933

160MM 100399934


40MM 100399926

50MM 100399927

75MM 100399928

110MM 100399925

160MM 100403346

TRIPLUS - THE LATEST IN ACOUSTIC DRAINAGENote: Triplus sizing is the OD measurement

TRIPLUS PIPE - 3M, 1M, 0.5M, 0.25M AND 0.15M LENGTHS

DESCRIPTION CODE

40MM x 3M 100414913

50MM x 3M 100414917

75MM x 3M 100414921

110MM x 3M 100414899

160MM x 3M 100414908

40MM x 1M 100414914

50MM x 1M 100414918

75MM x 1M 100414923

110MM x 1M 100414901

160MM x 1M 100414909

40MM x 0.5M 100414911

50MM x 0.5M 100414915

75MM x 0.5M 100414919

110MM x 0.5M 100414897

160MM x 0.5M 100414906

40MM x 0.25M 100414912

50MM x 0.25M 100414916

75MM x 0.25M 100414920

110MM x 0.25M 100414898

160MM x 0.25M 100414907

75MM x 0.15M 100414922

110MM x 0.15M 100414900


DRAINAGE SYSTEMS

45O JUNCTION DOUBLEDESCRIPTION CODE

110MM 100410718


87O REDUCING JUNCTIONSDESCRIPTION CODE

75MM - 50MM 100410803

110MM - 50MM 100410798

110MM - 75MM 100410799

160MM - 110MM 100410800

160MM - 125MM 100410801

87O JUNCTIONSDESCRIPTION CODE

40MM - 40MM 100410846

50MM - 50MM 100410847

75MM - 75MM 100410848

110MM - 110MM 100410844

160MM - 160MM 100410845

87O SWEEP JUNCTIONSDESCRIPTION CODE

110MM 100525475

87O SWEEP JUNCTION DOUBLEDESCRIPTION CODE

110MM 100525473

PAN COLLARDESCRIPTION CODE

100MM 10040366

FLOOR WASTE GULLYDESCRIPTION CODE

110MM x 75MM

50MM x 50MM

100407648

45O JUNCTIONSDESCRIPTION CODE

40MM - 40MM 100410841

50MM - 50MM 100410842

75MM - 75MM 100410843

110MM - 110MM 100410838

160MM - 160MM 100410839

45O REDUCING JUNCTIONSDESCRIPTION CODE

75MM - 50MM 100410797

110MM - 50MM 100410792

110MM - 75MM 100410793

160MM - 110MM 100410794

160MM - 125MM 100410795


DRAINAGE SYSTEMS

ECCENTRIC REDUCERSDESCRIPTION CODE

50MM - 40MM 100417718

75MM - 50MM 100417719

110MM - 50MM 100417713

110MM - 75MM 100417714

160MM - 110MM 100417715

160MM - 125MM 100417716

END CAPDESCRIPTION CODE

40MM 100419618

50MM 100419619

75MM 100419620

110MM 100419616

160MM 100419617

END CAP - RETAINING CLIP TRIPLUSDESCRIPTION CODE

110MM 100406730

LEVEL INV TAPERSDESCRIPTION CODE

110MM - 75MM 100601615

75MM – 50MM 100601614

SIPHON TRAPDESCRIPTION CODE

110MM 100404773

COUPLINGSDESCRIPTION CODE

40MM 100419459

50MM 100419460

75MM 100419461

110MM 100419456

160MM 100419457

VENTILLATION BRANCH DESCRIPTION CODE

110MM - RIGHT 100400367

110MM - LEFT 100493848

110MM - CENTRE 100493849

110MM - CENTRE LEFT 100493850

110MM - CENTRE RIGHT 100393851

SLIP COUPLINGS - WITHOUT CENTRE STOPDESCRIPTION CODE

40MM 100420128

50MM 100420129

75MM 100420130

110MM 100420127

160MM 100403346



DRAINAGE SYSTEMS

PVC ADAPTORSDESCRIPTION CODE

40MM x 40MM 100398195

50MM x 50MM 100398196

75MM x 65MM 100398197

TRANSITION GROMMETDESCRIPTION CODE

Triplus 50mm x OD 46/55 100409036

Triplus 50mm x OD 36/40 100409035

TRANSITION GROMMETDESCRIPTION CODE

Triplus 50mm x OD 46/55 100409036

Triplus 50mm x OD 36/40 100409035

FOUR WAY RISERDESCRIPTION CODE

110MM X 50MM 100418121

RUBBER ADAPTORSDESCRIPTION CODE

40MM 100403833

40MM x 32MM 100398198

50MM 100403834

50MM x 63MM 100398078

80MM 100403836

100MM 100403826


INSPECTION PIECESDESCRIPTION CODE

50MM 100414045

75MM 100414046

110MM 100414042

160MM 100414043


DRAINAGE SYSTEMS

TRIPLUS - THE LATEST IN ACOUSTIC DRAINAGENote: Triplus sizing is the OD measurementNote: Triplus sizing is the OD measurement

To minimise noise levels in waste and drainage systems, not only should the system be properly designed and the waste circuit mounted correctly, but it is also important to choose a system with an elevated soundproofing performance.

Valsir’s Triplus piping systems challenge the traditional approach of acoustic lagging and allow waste systems to be installed that guarantee excellent sound proofing performance.

These systems meet the National Construction Code (NCC) 2013 (Building Code of Australia – BCA) acoustic requirements (Rw + Ctr 40) for habitable rooms – when tested without acoustic lagging and using an industry standard ceiling structure (13mm plasterboard and 75mm R1.5 insulation batt).

The Triplus piping system has recently been tested by the CSIRO (Report MA151/R1 June 2013) and appraised by Day Design – Consulting Acoustical Engineers (Report 5116-1.2L July 2013).

ACOUSTIC PERFORMANCETRIPLUS PIPE WITHOUT LAGGING

FIRE COLLARS TO SUIT TRIPLUSDESCRIPTION CODE

SNAP 40-50MM 100407012

SNAP 65-110MM 100407013

SNAP 150MM 100407011

SNAP 50MM FLOOR WASTE 100407016

SNAP 65-100MM FLOOR WASTE 100407017

PROMASTOP UNICOLLAR WALL 100407043

PROMASEAL FC150 WALL - 150MM 100407024

SPARE RUBBER RINGSDESCRIPTION CODE

40MM 100418061

50MM 100418062

75MM 100418063

110MM 100418065

160MM 100418066

ADAPTOR - TRIPLUS TO SILEREDESCRIPTION CODE

58mm Silere x Triplus 50mm 100397504

78mm Silere x Triplus 75mm 100397511

50mm Triplus x Silere 58mm 100397502

75mm + Triplus x Silere 78mm 100397510

PIPE CLIPS WITH ANITI-VIBRATION RUBBER LININGDESCRIPTION CODE

40MM M10 FIXED/SLIDING 100414161





ALL THREAD ROD AND FIXINGSDESCRIPTION CODE

10MM X 3M THREADED ROD 100418459

DYNASET / KNOCK-IN 10MM 100405381

PURLIN HANGER M-10 HD 1004171787

BEVELLING TOOL & ACCESSORIESDESCRIPTION CODE

PIPE BEVELLING TOOL 100414060

BEVELLING TOOL REPLACEMENT BLADES

100399098

BEVELLING TOOL REPLACEMENT PLATES [BOTH]

100415713

LUBRICANTDESCRIPTION CODE

250ML 100411647

1LT 100411653


DRAINAGE SYSTEMSDRAINAGE SYSTEMSDRAINAGE SYSTEMS


VALSIR® HDPE DRAINAGE SYSTEMHigh Density Polyethylene waste pipe and fittings for sanitary and tradewaste applications.

Total Eden is committed to supplying the very best products to its customers and isproudly the exclusive Australian distributor for Valsir HDPE drainage pipe and fittings.

Suitable for “Butt” or “Electrofusion” welding, Valsir HDPE is available in a range of sizes from 50mm to 315mm diameter making it suitable for sanitary, trade and laboratory waste as well as stormwater discharge in domestic, commercial and industrial applications.

Able to handle hot water discharge up to 95º C, Valsir HDPE has an operating PH range of 0 to 14 making it ideal for acid and alkali chemical applications. Operating within these limits will ensure Valsir HDPE will not corrode during the lifetime of the building. All Valsir HDPE pipes are annealed to ensure stability in product dimensions.

Valsir HDPE pipe and fittings are environmentally friendly and suitable for above andbelow ground applications.

South MelbourneLifestyle Centre

Contractor:Tullamarine PlumbingValsir HDPE used throughout

DRAINAGE SYSTEMSDRAINAGE SYSTEMS


DRAINAGE SYSTEMS

HDPE PIPE - 5M STANDARD LENGTHS 15O & 30O BENDS

ELECTROFUSION COUPLINGS

45O BENDS

90O BENDS

88.5O BENDS

HDPE DRAINAGE SYSTEM - PIPE SIZE EQUIVALENCE

CAP ADAPTORS

VALSIR HDPE DRAINAGE SYSTEMS

32MM

40MM

50MM

56MM

63MM

75MM

90MM

110MM

125MM

160MM

200MM - SDR33

250MM - SDR33

315MM - SDR33

200MM - SDR26

250MM - SDR26

315MM - SDR26

110MM - 15º

110MM - 30º

40MM

50MM

56MM

63MM

75MM

90MM

110MM

125MM

160MM

200MM

250MM

315MM

32MM

40MM

50MM

56MM

63MM

75MM

90MM

110MM

125MM

160MM

200MM

250MM*

315MM*

40MM

50MM

56MM

63MM

75MM

90MM

110MM

125MM

160MM

200MM*

250MM*

315MM*

32MM

40MM

50MM

56MM

63MM

75MM

90MM

110MM

110MM - SWEEP

125MM

160MM

56MM

75MM

100414291

100414297

100414292

100414293

100414294

100414295

100414296

100414285

100414286

100414287

100414288

100414289

100414290

100414984

100414985

100414986

100399331

100399397

100403607

100403608

100403609

100403610

100403611

100403612

100403601

100403602

100403603

100403604

100403605

100403606

100399489

100399490

100399425

100399426

100399427

100399428

100399429

100399419

100399420

100399421

100399422

100399423

100399424

100399696

100399697

100399698

100399699

100399700

100399701

100399636

100399695

100399637

100399632

100399633

100399634

100399612

4330170

100399576

100399577

100399578

100399579

100399580

100399573

100399883

100399574

100399575

100404224

100404225

DESCRIPTION DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE CODE

CODE

CODE

CODE

CODE

CODE

Note: Valsir HDPE sizing is the OD measurement

* Denotes wide radius segemented bend

* Denotes wide radius segemented bend


DRAINAGE SYSTEMS

45O REDUCING JUNCTIONS


50MM X 40MM

56MM X 50MM

63MM X 50MM

63MM X 56MM

75MM X 40MM

75MM X 50MM

75MM X 56MM

75MM X 63MM

90MM X 40MM

90MM X 50MM

90MM X 56MM

90MM X 63MM

90MM X 75MM

110MM X 40MM

110MM X 50MM

110MM X 56MM

110MM X 63MM

110MM X 75MM

110MM X 90MM

125MM X 40MM

125MM X 50MM

125MM X 56MM

125MM X 63MM

125MM X 75MM

125MM X 90MM

125MM X 110MM

160MM X 40MM

160MM X 50MM

160MM X 56MM

160MM X 63MM

160MM X 75MM

160MM X 90MM

160MM X 110MM

160MM X 125MM

200MM X 40MM

200MM X 50MM

200MM X 56MM

200MM X 63MM

200MM X 75MM

200MM X 90MM

200MM X 110MM

200MM X 125MM

200MM X 160MM

250MM X 40MM

250MM X 50MM

250MM X 56MM

250MM X 63MM

250MM X 75MM

250MM X 90MM

250MM X 110MM

250MM X 125MM

250MM X 160MM

250MM X 200MM

315MM X 40MM

315MM X 50MM

315MM X 56MM

315MM X 63MM

315MM X 75MM

315MM X 90MM

315MM X 110MM

315MM X 125MM

315MM X 160MM

315MM X 200MM

315MM X 250MM

100410599

100410600

100410743

100410744

4330310

100410745

100410538

100410601

100410602

100410746

100410747

100410748

100410749

100410589

100410725

100410726

100410727

100410728

100410729

100410590

100410591

100410592

100410593

100410730

100410731

100410732

4330720

100410608

100410609

100410610

100410594

100410611

100410530

100410733

100410612

100410613

100410614

100410615

100410617

100410616

100410734

100410595

100410735

100410619

100410618

4330850

100410620

100410621

100410622

100410737

100410596

100410738

100410736

4330890

100410623

4330910

100410624

100410625

100410626

100410741

100410597

100410742

100410739

100410740

DESCRIPTION

DESCRIPTION

CODE

CODE

VALSIR HDPE DRAINAGE SYSTEMSNote: Valsir HDPE sizing is the OD measurement

45O EQUAL JUNCTIONS [OB]

40MM

50MM

56MM

63MM

75MM

90MM

110MM

125MM

160MM

200MM

250MM

315MM

100410598

100410534

100410535

100410536

100410537

100410539

100410527

100410528

100410529

100410531

100410532

100410533

DESCRIPTION CODE

88.5O JUNCTIONS & SWEEP JUNCTION

50MM

56MM

63MM

75MM

90MM

110MM

110MM - SWEEP

125MM

160MM

200MM

250MM

315MM

100410682

100410683

100410684

100410685

100410686

100410679

100410813

100410680

100410681

100410676

100410677

100410678

DESCRIPTION CODE


DRAINAGE SYSTEMS

45O DOUBLE JUNCTION

ECCENTRIC REDUCERS


110MM X 110MM

50MM X 40MM

63MM X 40MM

56MM X 50MM

63MM X 50MM

63MM X 56MM

75MM X 50MM

75MM X 56MM

75MM X 63MM

90MM X 40MM

90MM X 50MM

90MM X 56MM

90MM X 63MM

90MM X 75MM

110MM X 50MM

110MM X 56MM

110MM X 63MM

110MM X 75MM

125MM X 56MM

110MM X 90MM

125MM X 50MM

125MM X 63MM

125MM X 75MM

125MM X 90MM

125MM X 110MM

160MM X 110MM

160MM X 125MM

200MM X 125MM

100410540

100417657

100417658

100417680

100417697

100417681

100417682

100417683

100417684

100417659

100417685

100417688

100417686

100417687

100417667

100417668

100417669

100417670

100417672

100417666

100417671

100417673

100417674

100417675

100417676

100417677

100417678

100417679

DESCRIPTION

DESCRIPTION

CODE

CODE


LONG ECCENTRIC REDUCERS - LIT IN PIPE REDUCING ADAPTORS

CONCENTRIC REDUCERS

RING SEAL SOCKETS - INC PLUG - BUTT WELD ONLY

EXPANSION SOCKETS

160MM X 110MM

200MM X 110MM

200MM X 160MM

250MM X 200MM

315MM X 200MM

315MM X 250MM

100MM X 56MM

110MM X 50MM COPPER

110MM X 50MM FLEXI FIN

56MM X 50MM

63MM X 50MM

63MM X 56MM

75MM X 63MM

90MM X 63MM

90MM X 75MM

110MM X 50MM

110MM X 56MM

110MM X 63MM

110MM X 75MM

110MM X 90MM

160MM X 110MM

50MM

56MM

63MM

75MM

90MM

110MM

160MM

40MM

50MM

56MM

63MM

75MM

90MM

110MM

125MM

160MM

200MM

250MM

315MM

100417660

100417661

100417662

100417663

100417664

100417665

100417768

100417769

100417767

100417497

100417490

100417498

100417499

100417500

100417501

100417491

100417492

100417493

100417494

100417495

100417496

100419686

100419687

100419688

100419689

100419690

100419684

100419685

100406878

100419470

100419471

100419472

100419473

100419474

100419465

100419466

100419467

100406877

100419468

100419469


DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE CODE

CODE

CODE

CODE


DRAINAGE SYSTEMS

THREADED END CAPS & SLEEVES

BLANK ENDS

CAP & SEALS

ACCESS PIPE - SCREW CAP


50MM

56MM

63MM

75MM

110MM

50MM

56MM

63MM

75MM

110MM

160MM

50MM

56MM

63MM

75MM

110MM

50MM

56MM

63MM

75MM

90MM

110MM

160MM

200MM

250MM

315MM

100406757

100406758

100406759

100406760

100406756

100406660

100406661

100406662

100406663

100406658

100406659

100406752

100406753

100406754

100406755

100406751

100414037

100414038

100414039

100414040

100414041

100414032

100414033

100414034

100414035

100414036

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE


FOUR WAY RISERS

PUDDLE FLANGE

FIXED PALAZZI TRAPS

FIXED TRAP

ADJUSTABLE TRAPS

WC PAN COLLAR - RRJ

90 X 75 X 75 X 75 X 75MM

110 X 56 X 50 X 56 X 50MM

110 X 56 X 56 X 56 X 56MM

110 X 63 X 63 X 63 X 63MM

110MM

90MM X 75MM

110MM X 63MM

110MM X 75MM

110MM

110MM X 110MM

50MM X 50MM

50MM X 56MM

110MM

90MM X 80MM

433 0480

100418115

100418116

100418117

100407412

100415432

100423910

100423911

100423897

100423879

100423871

100423872

100403042

100413938

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

CODE

CODE DISCONNECTOR TRAP - FIXED

110MM 100423882

DESCRIPTION CODE


DRAINAGE SYSTEMS

DISCONNECTOR TRAP

P TRAPS - FIXED

CAP AND LININGS

RUBBER ADAPTORS PVC & COPPER

ADAPTORS PVC & COPPER


110MM - INCLUDES NUT

50MM

56MM

50MM X 1 1/2”

50MM X 1 1/2” - EXTENDED

LINING

40MM PVC X 63MM HDPE

40MM COPP X 50MM HDPE


40MM PVC X 50MM HDPE


50MM COPP X 50MM HDPE*

50MM PVC X 56MM HDPE*





WHITE

100MM PVC X 110MM HDPE*

100423881

100423903

100423904

100401775

100401771

100398080

100398078

100398079

100397628

100397627

100419686

100419687

100397629

100397630

100397631

100397632

100419684

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

CODE

* Standard Ring Seal Socket


ADAPTORS - FI & MI

VENTILATION BRANCHES

SLAB REPAIR ADAPTORS

STUB FLANGE ADAPTORS - SDR26

50MM X 1 1/2” - FEMALE

50MM X 1 1/2” - MALE

56MM X 2” - FEMALE

56MM X 2” - MALE

63MM X 2” - FEMALE

63MM X 2” - MALE

75MM X 2 1/2” - FEMALE

75MM X 2 1/2” - MALE

110MM

160MM

56MM

110MM

75MM

110MM

160MM

100398184

100398188

100398185

100398189

100398186

100398190

100398187

100398191

100424786

100424787

100409516

433 0560

100398144

100421241

100421242

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

BACKING RINGS - GALVANISED

75MM TABLE E

75MM TABLE D

110MM TABLE E

110MM TABLE D

160MM TABLE E

160MM TABLE D

100398610

100398605

100398615

100398585

100398622

100398587

DESCRIPTION CODE


DRAINAGE SYSTEMS

ELECTROFUSION MACHINES

LEADS

PLUGS

HAND BUTT WELDING PLATE 230V

PIPE CUTTERS AND TOOLS

LUBRICANT & WIPES

POWER SUPPLY

BUTT WELDING MACHINES


40MM - 160MM - MUSTANG

50MM - 315MM - UNVERSAL

50MM - 160MM - MUSTANG

50MM - 315MM - UNIVERSAL

50MM - 160MM - YELLOW

200MM - 315MM - BLUE

50MM - 160MM

PIPE CUTTER 50MM - 140MM

PIPE SCRAPER

SCRAPING KNIFE

PIPE BEVELLER 50MM -160MM

250ML TUBE

WIPES

CORD WITH PLUG - 240V,

15 AMP

50MM - 160MM - VALSIR

PRATICA

90MM - 315MM - VALSIR MAXI

100426594

100426595

100411321

100402012

100415644

100415487

100426598

100414262

100414958

100411206

100414060

100411647

100426660

100409518

100426592

100426590

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE

Information provided as a guide only, please refer to manufacturers website for technical specifications & information. www.valsir.it



DRAINAGE SYSTEMS


DRAINAGE SYSTEMS

88° BEN – M&FDESCRIPTION CODE

40MM 100462564

50MM 100462565

65MM 100462566

100MM 100399609


DRAINAGE SYSTEMS

Acoustic Supplies Pty Ltd | 28 Norton Street Randwick NSW 2031 AustraliaSales Enquiries +61 0414 281 800 General Enquiries +61 0427 922 733

Facsimile +61 2 9326 4893 Email [email protected] Web ww w.acousticsupplies.com

© 2016 Acoustic Supplies Pty Ltd | 100% Australian Owned Company

VIBRALAG TM | Acoustic LaggingVibralag is a time and cost e�ective solution for treating noisy waste, supply and storm water pipes. It has been designed to meet and exceed the acoustic requirements of the Building Code of Australia ( BCA) when coupled with standard riser and building systems.

The product is a composite of three layers of di�erent materials, each serving their own very speci�c purposes:• The aluminium foil on the outside provides the desired

�re and �ame resistance rating.• The heavy and �exible barium loaded rubber

composite middle core, provides the ‘limp mass’ in trapping the noise.

• The inner layer of convoluted foam is for ‘mass-decoupling’ the limp mass from the noise radiating pipe wall and also bene�ts by absorbing the noise being trapped inside the lagging.

Vibralag is available in two weights: 5 kg/m 2 and 8 kg/m 2

INSTALLATION GUIDE Vibralag is supplied in rolls. The standard length of each roll is 4m long and 1m wide. Aluminium ducting tape is recommended to be used on all laps and joints. The table below is a conservative coverage guide for commonly used pipe sizes. This calculation is based on a minimum of 25mm lapping, plus cutting wastages.

Pipe Diameter One Roll Lags (Lineal Metres)

50mm Approx. 12m

100mm Approx. 8m

150mm Approx. 6m

200mm Approx. 4 m

VIBRALAG ACOUSTIC LAGGINGDESCRIPTION CODE

40MM x 40MM 100398195

50MM x 50MM 100398196

75MM x 65MM 100398197

Quieter plumbing through waterpipe insulationVIBRALAG™

Acoustic LaggingVIBRALAG™ | ACOUSTIC LAGGINGVibralag is a time and cost effective solution for treating noisy waste, supply and storm water pipes. It has been designed to meet and exceed the acoustic requirements of the Building Code of Australia (BCA) when coupled with standard riser and building systems.

The product is a composite of three layers of different materials, each serving their own very specific purposes:

• The aluminium foil on the outside provides the desired fire and flame resistance rating.• The heavy and flexible barium loaded rubber composite middle core, provides the ‘limp mass’

in trapping the noise.• The inner layer of convoluted foam is for ‘massdecoupling’ the limp mass from the noise radiating

pipe wall and also benefits by absorbing the noise being trapped inside the lagging.

Vibralag is available in two weights: 5kg/m2 and 8kg/m2 (on request). Generally, the heavier the lagging material the better they perform. In most cases, the 5kg/m2 Vibralag is sufficient.

BENEFITS• Effective sound absorption and attenuation.• Easy to use and install.• Material easy to cut to size with basic cutting tools.• Time and cost effective solution to aid compliance with the BCA.• Versatile range of environmental applications.

INSTALLATION GUIDEVibralag is supplied in rolls. The standard length of each roll is 4m long and 1m wide. Aluminium ducting tape is recommended to be used on all laps and joints. The table to the left is a conservative coverage guide for commonly used pipe sizes. This calculation is based on a minimum of 25mm lapping, plus cutting wastages.

Acoustic Supplies Pty Ltd | 28 Norton Street Randwick NSW 2031 AustraliaSales Enquiries +61 0414 281 800 General Enquiries +61 0427 922 733

Facsimile +61 2 9326 4893 Email [email protected] Web ww w.acousticsupplies.com

© 2016 Acoustic Supplies Pty Ltd | 100% Australian Owned Company

VIBRALAG TM | Acoustic LaggingVibralag is a time and cost e�ective solution for treating noisy waste, supply and storm water pipes. It has been designed to meet and exceed the acoustic requirements of the Building Code of Australia ( BCA) when coupled with standard riser and building systems.

The product is a composite of three layers of di�erent materials, each serving their own very speci�c purposes:• The aluminium foil on the outside provides the desired

�re and �ame resistance rating.• The heavy and �exible barium loaded rubber

composite middle core, provides the ‘limp mass’ in trapping the noise.

• The inner layer of convoluted foam is for ‘mass-decoupling’ the limp mass from the noise radiating pipe wall and also bene�ts by absorbing the noise being trapped inside the lagging.

Vibralag is available in two weights: 5 kg/m 2 and 8 kg/m 2

INSTALLATION GUIDE Vibralag is supplied in rolls. The standard length of each roll is 4m long and 1m wide. Aluminium ducting tape is recommended to be used on all laps and joints. The table below is a conservative coverage guide for commonly used pipe sizes. This calculation is based on a minimum of 25mm lapping, plus cutting wastages.

Pipe Diameter One Roll Lags (Lineal Metres)

50mm Approx. 12m

100mm Approx. 8m

150mm Approx. 6m

200mm Approx. 4 m

PIPE DIAMETER ONE ROLL LAGS (lineal metres of pipe)

50mm Approx. 12m

100mm Approx. 8m

150mm Approx. 6m

200mm Approx. 4m


DRAINAGE SYSTEMS

PIPE - 6M LENGTHS - SWJ

SN6 PIPE - 6M LENGTHS - SWJ

SN8 PIPE - 3M LENGTHS - SWJ

SN8 PIPE - 3M LENGTHS - RRJ

PLAIN COUPLINGS

REPAIR COUPLINGS

FI COUPLINGS

MI COUPLINGS

5O BENDS

15O BENDS

PVC DWV PIPE AND FITTINGS

40MM

50MM

65MM

80MM

100MM

150MM

225MM

300MM

100MM - SLOTTED

150MM - SEH

150MM - SEH - SLOTTED

225MM - SEH

150MM - SEH

225MM - SEH

40MM

50MM

65MM

80MM

100MM

150MM

225MM

100MM - SLIP

150MM - SLIP

100MM - 2 PART

150MM - 2 PART

40MM X 1 1/2”

50MM X 2”

40MM X 1 1/2”

50MM X 2”

100MM X 4”

100MM F+F

150MM F+F

100MM M+F

100MM F+F

100MM M+F

150MM F+F

225MM F+F

150MM F+F

100403568

100403569

100403570

100403571

100403565

100403566

100403567

100404196

100403586

100403583

100403584

100403552

100403554

100403551

100403553

100403547

100399550

100399551

100399553

100399318

100399329

100399319

100399320

100399330

100414302

100414303

100414304

100414305

100414311

100414306

100414307

100414308

100415001

100414301

327 3913

100414313

100414309

100414310

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE


DRAINAGE SYSTEMS

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE

60O BENDS

30O BENDS

45O BENDS

85O BENDS

85O BENDS (CONTINUED)

45O JUNCTIONS “OB”

45O REDUCERS

85O REDUCERS

85O JUNCTIONS


100MM M+F

100MM F+F

100MM M+F

150MM F+F

225MM F+F

40MM F+F

40MM M+F

50MM F+F

50MM M+F

65MM F+F

65MM M+F

80MM F+F

100MM F+F

100MM M+F

100MM F+F - IO

100MM F+F - ACCESS

150MM F+F

150MM M+F

225MM F+F

300MM F+F

40MM F+F

40MM F+F IO

50MM F+F

50MM M+F

50MM F+F IO

65MM F+F

65MM M+F

80MM F+F

100MM F+F

100MM M+F

100MM F+F - IO

100MM F+F - REAR ACCESS

100MM F+F - STD. ACCESS

150MM F+F

150MM M+F

225MM F+F

300MM F+F

40MM F+F

50MM F+F

100MM F+F

150MM F+F

225MM F+F

100MM F+F - RH ACCESS

100MM F+F - LH ACCESS

100MM X 50MM F+F

100MM X 65MM F+F

150MM X 100MM F+F

225MM X 100MM F+F

225MM X 150MM F+F

300MM X 150MM F+F

150MM X 100MM F+F

225MM X 100MM F+F

225MM X 150MM F+F

40MM F+F

40MM F+F - IO

50MM F+F

50MM F+F - IO

65MM F+F

80MM F+F

100MM F+F

100MM M+F

100MM F+F - IO

100MM F+F - REAR ACCESS

150MM F+F

225MM F+F

100399556

100399393

100399396

100399394

479 0035

100399464

100399478

100399465

100399479

100399466

100399480

100399467

100399459

100399475

100399468

100399474

100399460

100399476

100399461

100399462

100399593

100399598

100399594

100399607

100399599

100399595

100399330

100399596

100399589

100399603

100399597

100399667

100399668

100399590

100399604

100399665

100399666

100410556

100410557

100410548

100410550

100410553

100410569

100410568

100410825

100410826

100410827

100410828

100410829

100410831

100410833

100410834

100410835

100410816

100410689

100410817

100410821

100410818

100410819

100410814

100410823

100410820

100410822

100410815

100410824

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE


DRAINAGE SYSTEMS

CODE

CODE

CODE

CODE

CODE

CODE

85O RISER JUNCTION - M+F

87O RISER JUNCTION - M+F

TEST OPENINGS

LEVEL INVERT TAPERS - LIT

ECCENTRIC SOCKET REDUCERS

ECCENTRIC PIPE REDUCERS

FI ADAPTORS

MI ADAPTORS

THREADED CAPS

DUST CAPS

PUSH ON CAPS


100MM X 50MM X 50MM X

50MM X 40MM

80MM X 50MM X 40MM X 40MM X 40MM

65MM F+F

100MM F+F

100MM F+F WITH EXP COUPLING

100MM M+F

150MM F+F

50MM X 40MM65MM X 40MM65MM X 50MM80MM X 40MM80MM X 50MM80MM X 65MM100MM X 50MM100MM X 65MM100MM X 80MM150MM X 100MM225MM X 100MM225MM X 150MM300MM X 100MM300MM X 150MM300MM X 225MM

50MM X 40MM65MM X 40MM65MM X 50MM80MM X 50MM100MM X 40MM100MM X 50MM100MM X 65MM100MM X 80MM150MM X 100MM

100MM X 40MM

100MM X 50MM

100MM X 90MM - SW

40MM X 1 1/2”

50MM X 2”

40MM X 1 1/2”

50MM X 2”

100MM

150MM

40MM

90MM

100MM

40MM

50MM

65MM

80MM

100MM

150MM

225MM

300MM

100418119

100418120

100423985

100423988

100423983

100423989

100423984

100423728100423729100423730100423731100423732100423733100423722100423723100423724100423725 4802354100423726 4790240100423719100423734

100417637100417692100417638100419645100417633100417634100417635100417636100417689

100417783

100417631

100414888

100397645

100397646

100397648

100397649

100401750

100401751

100401497

100401502

100401496

100401655

100401656

100401657

100401658

100401652

100401653

100401654

100401659

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE

100418118

100MM X 100MM X 50MM X 50MM X 40 X 40


DRAINAGE SYSTEMS

CODE

FLOOR & LEAK CONTROL FLANGES

ACCESS COUPLINGS

SLAB REPAIR COUPLINGS

EXPANSION COUPLINGS

VENT COWLES

FLAP VALVES

REFLUX VALVE

PAN COLLARS

MANHOLE COUPLINGS - RRJ

SWIVEL JOINTS

FLEXIBLE RUBBER CONNECTORS


40MM

50MM

65MM

100MM

100MM PUDDLE FLANGE

100MM PUDDLE FLANGE

100MM

150MM

40MM M+F40MM FLANGED50MM M+F50MM FLANGED65MM FLANGED80MM FLANGED100MM M+F100MM FLANGED150MM M+F

50MM F+RRS65MM F+RRS100MM F+RRS100MM F+F ASSEMBLY150MM F+F ASSEMBLY

50MM

65MM

100MM

50MM

100MM

150MM

100MM

150MM

225MM

100MM - MALE

100MM - ADJUSTABLE

100MM M+F

150MM M+F

150MM M+F - SEH

225MM M+F

300MM M+F

100MM

40MM - PVC

50MM - PVC

65MM - PVC

80MM - PVC

100MM - PVC

150MM - PVC

300MM PVC 100MM PVC - 100MM EARTHENWARE ADAPTOR150MM PVC - 150MM EARTHENWARE ADAPTOR225MM PVC - 225MM EARTHENWARE ADAPTOR

100407253

100407254

100407255

100407252

100417072

100407409

100403454

100403455

100404204100397661100404205100397662100397663100397664100404203100397660100397657

100403561100403575100403564100403563100403577

100424791

100404255

100424789

100425977

100425976

100425979

100426271

100426272

100403041

100403038

100403589

100403587

100404165

100403581

100410863

100403833

100403834

100403835

100403836

100403248

100403249

100403195 100403196 100403244 100403245

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE


DRAINAGE SYSTEMS

CODE

CODE

CODE

CODE

CODE

P TRAPS

COMBINED S&P TRAPS

ADJUSTABLE DISCONNECTOR TRAP

BOX GULLY

BOLTED SCREW TRAPS

FLOOR GULLY P TRAPS

GRATES

PLUG & WASHERS

WEATHERING APRON

TEST PLUG

AIR ADMITTANCE DEVICE

SOCKET ADAPTORS


40MM

50MM

40MM

50MM

100MM

65 X 50 X 40 X 40MM

100MM

150MM

80MM X 65MM

100MM X 50MM

100MM X 65MM

100MM - FINISHING COLLAR100MM - FINISHING COLLAR LONG SPIGOT100MM - FINISHING COLLAR & GRATE50MM - PLAIN ROUND GRATE SOCKET125MM - DOMED DT GRATE125MM - SHORT FLAT DT GRATE

40MM - PLUG & WASHER FIXED

50MM - PLUG & WASHER FIXED

50MM

50MM

50MM STUDOR VENT`

100MM SOCKET X EARTHERN-WARE SOCKET100MM SOCKET X EARTHERN-WARE SPIGOT150MM SPIGOT X EARTHERN-WARE SOCKET150MM SPIGOT X EARTHERN-WARE SPIGOT

100423907

100423901

100423890

100423891

100423892

100399980

100423875

100423883

100409425

100409421

100409422

100403024 100403027 100403029 100419462100409046100409053

100415652

100411665

100398369

100423998

100424800

100397656 100397641 100397666 100397667

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE

S TRAPS

40MM

50MM

100423912

100423913

DESCRIPTION CODE


DRAINAGE SYSTEMS

DWV PIPE SADDLES - GALVANISED - NYLON COATED

DWV STAND-OFF SADDLES - GAL - NYLON COATED

DWV PEAR CLIPS

DWV PIPE CLIPS - NYLON COATED - WHITE

DWV EXPANSION PIPE CLIPS - GREY

DWV WELDED NUT CLIPS - 10MM NUT - COATED

HOOP BAND STRAPPING - GALVANISED

ALL THREAD ROD

FIXINGS

CLIPS & SADDLES

40MM

50MM

65MM

80MM

100MM

40MM

50MM

100MM

110MM - DWV & SW

150MM - DWV & SW

40MM

50MM

65MM

80MM

100MM

150MM - DWV & SW

40MM

50MM

65MM

80MM - SUITS 90MM SW

100MM

40MM

50MM

65MM

80MM

100MM

25MM X 0.8MM X 15M

10MM X 3M

DYNASET / KNOCK-IN 10MM

PURLIN HANGER M-10 HD

100418924

100418925

100418926

100418927

100418923

#N/A

100400306

#N/A

480 6000

480 6005

100414105

100402754

100402755

100414106

100402749

100414088

100414107

#N/A

100414109

100414110

100414108

100414191

100414194

100414197

100414200

100414177

100421227

100418459

100405381

100417187

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE


DRAINAGE SYSTEMS

SOLVENT CEMENTS - TYPE N

DUCT & TEFLON TAPES

SPOT MARKING PAINT

WARNING TAPE

PRIMING FLUIDS

SILICONES & LUBRICANTS

NON PRESSURE SOLVENT CEMENT AND PRIMERS

CONSUMABLES

125ML - BLUE

250ML - BLUE

250ML - CLEAR

500ML - BLUE

500ML - CLEAR

1LT - BLUE

4LT - BLUE

4LT - CLEAR

20LT - CLEAR

DUCT TAPE

10M X 12MM TEFLON TAPE

10M X 12MM TEFLON TAPE,

PINK

RED

YELLOW

WHITE

FLURO PINK

BLUE

300M X 150MM - SEWER -

BLACK - DETECTABLE

250ML - RED

250ML - CLEAR

500ML - RED

500ML - CLEAR

1LT - RED

4LT - RED

4LT - CLEAR

300G SILICONE SEALANT -

CLEAR NEUTRAL CURE

370G HIGH JOINT MOVEMENT

SILICONE - CHARCOAL

1LT 2 PART FERROPREE

EPOXY JOINING COMPOUND

500ML RRJ LUBRICANT

1LT RRJ LUBRICANT

100420283

100420285

100420288

100420287

100420289

100420284

100420286

100420279

100420258

100422272

308 1640

480 5665

100413930

100413931

100413927

100413933

100413928

100422312

100416981

100416976

100416983

100416978

100416980

100416982

100416977

480 5680

480 5695

100406847

330 0884

100411653

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

CODE

CODE

SHOVELS & SPADES - 5MM FIBREGLASS HANDLES

TRENCHING SHOVEL

PLUMBERS SHOVEL

GARDEN SPADE

100419330

100419318

100420315

DESCRIPTION CODE


DRAINAGE SYSTEMS

HOW VORTEX FLOW CAN SAVE MONEY

BUILT-TO-SPEC FOR ANY SIZE

VORTEX FLOW - INSERTS FOR SEWER ODOUR AND CORROSION CONTROL

SN10 SEWERPRO PIPE - 3M LENGTHS - RRJ SN10 SEWERMAX PIPE - 3M LENGTHS - RRJ

SEWERPRO AND SEWERMAX PIPE

150MM

225MM

300MM

375MM

450MM

525MM

600MM

750MM

900MM

225MM

300MM

375MM

450MM

525MM

600MM - 2.76M LENGTHS

480 2070

480 2075

480 2080

100414988

100414989

480 2095

480 2100

480 2105

480 2110

460 5372

460 5373

460 5374

460 5375

460 5376

460 5377


For a full range of StormPro Fittings see page 46.

CODE CODE

REDUCED CORROSION EXTENDS SEWER LIFEHydrogen sulfide (H2S) emissions from forcemain discharges can literally eat through a concrete drop manhole. By oxidizing dissolved H2s, a Vortex Flow Insert in a municipal sewer drop can significantly reduce concrete and metal corrosion, extending sewer life and saving the municipality money.

ELIMINATES ODOUR TREATMENT COSTSBy increasing dissolved oxygen levels in wastewater and oxidizing sulfides and other odorous compounds, the use of a Vortex Flow Insert in a drop structure eliminates the need for costly chemical injection, high-maintenance biofilters and air scrubbers.

IMPROVES WASTE WATER QUALITYBecause a Vortex drop structure reduces the odorous and corrosive elements in the flow, a Vortex Flow Insert, installed upstream of a treatment plant, can actually improve wastewater quality prior to treatment, reducing treatment costs at sewage plants.

REDUCED MAINTENANCE COSTSThe use of a Vortex drop structure eliminates the corrosion ofconcrete and metal sewer components, dramatically reducingmunicipal maintenance costs of manholes and sewers.

Manholes, chambers and pumping stations are built in a variety of sizes. For that reason, Ipex custom designs and custom builds everyVortex Flow Insert.

Ipex VFIs are sized based on peak flow that the unit is required to handle. The insert can be installed in a standard manhole without restricting access for maintenance.


HOT & COLD WATER SYSTEMS AND GAS SYSTEMSHOT & COLD WATER SYSTEMS AND GAS SYSTEMS

COPPER TUBE TYPE B - 6 METRE LENGTHS

ANNEALED COPPER TUBE - 18 METRE LENGTHS

COPPER PIPE AND FITTINGS

12.7MM X 0.91MM HHS X 6M


25.4MM X 1.22MM HDS X 6M







127.0MM x 1.63M WT DN125

152.4MM x 2.03M WT DN150

203.2MM x 2.03M WT DN200


15.88MM OD X 1.02MM WT X 18M

19.05MM OD X 1.02MM WT X 18M

100461058

100461060

100461071

100461072

100461073

100461074

100461075

100461076

100461078

100461079

100461080

100461081

100461082

100461083

100461084

DESCRIPTION CODE

DESCRIPTION CODE

45O BEND F+F

90O BEND SHORT RADIUS F+F

25MM

32MM

40MM

50MM

65MM

80MM

100MM

125MM

150MM

25MM

32MM

40MM

50MM

65MM

80MM

100MM

125MM

150MM

100399842

100399825

100399826

100399827

100399828

100399829

100399819

100399820

100399821

100399842

100399847

100399848

100399849

100399850

100399851

100399843

100399845

100399846

DESCRIPTION CODE

DESCRIPTION CODE

90O ELBOW F+F CAPILLARY

15MM

20MM

25MM

100401514

100401516

100401517

DESCRIPTION CODE

REDUCING TEE

20MM X 20MM X 15MM-C



20MM X 20MM-C X 15MM





100423160

100423164

100423165

100423159

100423162

100423163

100423158

100423161

DESCRIPTION CODETEE EQUAL F+F

15MM

20MM

25MM

32MM

40MM

50MM

65MM

80MM

100MM

100422715

100401743

100422723

100422724

100422728

100422733

100422739

100422752

100422704

DESCRIPTION CODE


HOT & COLD WATER SYSTEMS AND GAS SYSTEMS

CAP

SILVER SOLDER STICKS

15MM

20MM

25MM

32MM

40MM

50MM

65MM

80MM

100MM

15% SILVER - 2.4MM X 750MM

5% SILVER - 3MM X 750MM

2% SILVER - 3MM X 750MM

100401557

100401559

100401561

100401562

100401563

100401564

100401565

100401566

100401554

100420240

100420245

100420243

DESCRIPTION CODE

DESCRIPTION CODE

REDUCER M+F

JOINER F+F

COPPER PIPE AND FITTINGS

20MM X 15MM

25MM X 20MM

32MM X 20MM

32MM X 25MM

40MM X 20MM

40MM X 25MM

40MM X 32MM

50MM X 20MM

50MM X 25MM

50MM X 32MM

50MM X 40MM

65MM X 40MM

65MM X 50MM

80MM X 40MM

80MM X 50MM

80MM X 65MM

100MM X 50MM

100MM X 65MM

100MM X 80MM

15MM

20MM

25MM

32MM

40MM

50MM

65MM

80MM

100MM

100417746

100417749

100417751

100401704

100417753

100417754

100417755

100417756

100417757

100417758

100417759

100417761

100417762

100417763

100417764

100417765

100417735

100417736

100417737

100410905

100410907

100410909

100410910

100410911

100410912

100410913

100410914

100410902

DESCRIPTION CODE

DESCRIPTION CODE



Please refer to pages 148 and 149 for the Tool Compatibility Chart

COUPLING CRIMP - WATER & GAS

DESCRIPTION - WATER CODE DESCRIPTION - GAS CODE

15MM 100481056 DN15 100498688

20MM 100481057 DN20 100498689

25MM 100481058 DN25 100498690

32MM 100481059 DN32 100498691

40MM 100481060 DN40 100498692

50MM 100481171 DN50 100498693

65MM 100481172

80MM 100481173

100MM 100481174

SLIP COUPLING CRIMP - WATER & GAS


15MM 100481175 DN15 100498694

20MM 100481176 DN20 100498695

25MM 100481177 DN25 100498696

32MM 100481178 DN32 100498697

40MM 100481179 DN40 100498698

50MM 100481180 DN50 100498699

65MM 100481181

80MM 100481182

100MM 100481183

SPIGOT REDUCER - WATER & GAS


20 X 15MM 100481258 DN20 X DN15 100498700

25 X 15MM 100481259 DN25 X DN15 100498701

25 X 20MM 100481260 DN25 X DN20 100498702

32 X 20MM 100481261 DN32 X DN20 100498703

32 X 25MM 100481262 DN32 X DN25 100498704

40 X 25MM 100481263 DN40 X DN25 100498705

40 X 32MM 100481264 DN40 X DN32 100498706

50 X 32MM 100481265 DN50 X DN32 100498707

50 X 40MM 100481266 DN50 X DN40 100498708

65 X 50MM 100481267

80 X 50MM 100481268

80 X 65MM 100481269

100 X 50MM 100481270

100 X 65MM 100481271

100 X 80MM 100481272

COPPER PRESS-FIT FITTINGSCOPPER




END CAP COPPER CRIMP - WATER & GAS


15MM 100481227 DN15 100498709

20MM 100481228 DN20 100498710

25MM 100481229 DN25 100498711

32MM 100481230 DN32 100498712

40MM 100481231 DN40 100498713

50MM 100481232 DN50 100498714

65MM 100481233

80MM 100481234

100MM 100481235

45 DEGREE ELBOW BEND F/F - WATER & GAS


20MM 100481219 DN20 100498727

25MM 100481220 DN25 100498728

32MM 100481221 DN32 100498729

40MM 100481222 DN40 100498730

50MM 100481223 DN50 100498731

65MM 100481224

80MM 100481225

100MM 100481226

SOCKET REDUCER - WATER & GAS


20 X 15MM 100481236 DN20 X DN15 100498715

25 X 15MM 100481237 DN25 X DN15 100498716

25 X 20MM 100481238 DN25 X DN20 100498717

32 X 20MM 100481239 DN32 X DN20 100498718

32 X 25MM 100481240 DN32 X DN25 100498719

40 X 20MM 100481241 DN40 X DN20 100498720

40 X 25MM 100481242 DN40 X DN25 100498721

40 X 32MM 100481243 DN40 X DN32 100498722

50 X 20MM 100481244 DN50 X DN20 100498723

50 X 25MM 100481245 DN50 X DN25 100498724

50 X 32MM 100481246 DN50 X DN32 100498725

50 X 40MM 100481247 DN50 X DN40 100498726

65 X 25MM 100481248

65 X 32MM 100481249

65 X 40MM 100481250

65 X 50MM 100481251

80 X 40MM 100481252

80 X 50MM 100481253

80 X 65MM 100481254

100 X 50MM 100481255

100 X 65MM 100481256

100 X 80MM 100481257





F1 90 DEGREE BEND WALL FIX - WATER & GAS


15 X 15MM FI BSP 100481275 DN15 X BSP 1/2IN 100498751


90 DEGREE ELBOW BEND F/F - WATER & GAS


15MM 100481204 DN15 100498732

20MM 100481205 DN20 100498733

25MM 100481206 DN25 100498734

32MM 100481207 DN32 100498735

40MM 100481208 DN40 100498736

50MM 100481209 DN50 100498737

65MM 100481210

80MM 100481211

100MM 100481212

90 DEGREE BEND M/F - WATER & GAS


15MM 100481213 DN15 100498738

20MM 100481214 DN20 100498739

25MM 100481215 DN25 100498740

32MM 100481216 DN32 100498741

40MM 100481217 DN40 100498742

50MM 100481218 DN50 100498743


F1 ADAPTOR - WATER & GAS



20 X 20MM FI BSP 100481291 DN20 S BSP 3/4IN 100498778




TEE REDUCED - WATER & GAS


20 X 15 X 15MM 100481194 DN20 X 15BR X DN15 100498762

20 X 15 X 20MM 100481193 DN20 X 15BR X DN20 100498763

20 X 20 X 15MM 100481195 DN20 X 20BR X DN15 100498764

25 X 15 X 25MM 100481196 DN25 X 15BR X DN25 100498765

25 X 20 X 25MM 100481197 DN25 X 20BR X DN25 100498766

32 X 25 X 32MM 100481198 DN32 X 25BR X DN32 100498767

40 X 32 X 40MM 100481199 DN40 X 32BR X DN40 100498768

50 X 40 X 50MM 100481200 DN50 X 40BR X DN50 100498769

65 X 50 X 65MM 100481201

80 X 65 X 80MM 100481202

100 X 80 X 100MM 100481203

ADAPTOR PEX PRESSED - WATER & GAS


15 X 15MM 100481286 DN15 X PEX DN16 100498774

20 X 20MM 100481287 DN20 X PEX DN20 100498775

DN25 X PEX DN25 100498776


TEE EQUAL - WATER & GAS


15MM 100481184 DN15 100498756

20MM 100481185 DN20 100498757

25MM 100481186 DN25 100498758

32MM 100481187 DN32 100498759

40MM 100481188 DN40 100498760

50MM 100481189 DN50 100498761

65MM 100481190

80MM 100481191

100MM 100481192

M1 90 DEGREE BEND - WATER & GAS


20 X 20MM MI BSP 100481274 DN20 X BSP 3/4IN 100498749

*BR = Branch




M1 90 DEGREE BEND WALL FIX – WATER & GAS – 85MM THREAD



COPPER PRESS-FIT FITTINGSM1 UNION - WATER & GAS




25 X 25MM MI BSP 100481280 DN25 X BSP 1IN 100498792

32 X 32MM MI BSP 100481281 DN32 X BSP 1 1/4IN 100498793



COPPER

FLARED UNION - WATER

DESCRIPTION - WATER CODE

15 X 15MM FI BSP 100481284

20 X 20MM FI BSP 100481285

F1 90 DEGREE BEND - WATER


20 X 20MM FI BSP 100481273

ADAPTOR PEX AXIAL - WATER


15 X 15MM 100481288

20 X 20MM 100481289




COPPER PRESS-FIT FITTINGSCOPPERM1 ADAPTOR -WATER & GAS









DN50 X BSP 2IN 100498789



COMMERCIAL HOT WATER UNITS

Are you looking for a continuous flow hot water system for your next commercialproject?We have dealer access to Australia's leading manufacturers' and we offer competitive pricing and dependable customer service.

• Heavy duty continuous flow units.

• Minimum 5 star energy rating - meaning reduced gas consumption.

• Manifold packs that allow for multiple units to be plumbed together.

• Indoor and outdoor models available.

Commercial continuous flow water heaters provide a consistent outlet temperature atall times, giving users peace of mind that hot water is available when they need it.

For the range of models available or to discuss your commercial hot water systemrequirements contact Total Eden today - no job is too big or too small.



STORMWATER SYSTEMS

• Valsir® Rainplus® Siphonic System

• Stormwater Pipe: 75mm - 150mm

• Standard Stormwater Fittings: 75mm - 375mm

• Butthead Stormwater Fittings: 150mm - 300mm

• Clips and Accessories

• Non Pressure Solvent Cements and Primers

• BlackMAX™ PP Corrugated Pipe & Fittings: 150 - 900mm

• StormPRO® PP Corrugated Pipe & Fittings: 150 - 900mm

• Drain Pipe and Fittings

• Pits, Drains, Rainwater Outlets, Grates and Cleanouts

Valsir Rainplus is a syphonic rainwater drainage system designed to guaranteemaximum drainage performance with the lowest levels of water accumulation onthe roof of medium to large size buildings. Using the building height as the drivingforce combined with the negative pressure generated inside the pipes, Rainplusmaximises water drainage speed and therefore drainage efficiency.

PVC stormwater pipes and fittings are available in sizes ranging from 75mm to375mm diameter. Total Eden stocks a full range of pipes and fittings including 200mmOD pipe that provides the installer with another option when 160mm diameter pipedoes not meet the hydraulic flow requirements of the project. Butt-head is Total Eden'sown quality brand of moulded and fabricated PVC stormwater fittings.

StormPRO and BlackMAX are twin walled corrugated polypropylene pipe andfittings for large bore stormwater applications. Both products are a cost effectivenon corroding alternative to traditional metal and concrete rigid pipe materials.These pipes have a wall profile structure which provides high ring stiffness (SN8)ensuring these products can readily withstand both installation and service loads.

Premium Commercial Pits, Drains, Grates and Cleanouts by leading manufacturersalso make up part of Total Eden’s stormwater and drainage product range.The range includes floor drains, wastes, cleanouts and rainwater outlets all of whichare ideal for commercial and municipal environments.


STORMWATER SYSTEMS


STORMWATER SYSTEMS

VALSIR® RAINPLUS® Siphonic roof drainage systemValsir Rainplus features the most up to date technology in rainwater drainage for roofs of medium to large buildings. The system uses the building height as the driving force to generate high speed flow rates thus maximising drainage efficiency. Rainplus allows the entire flow of water to be directed to any part of the building, enabling the most modern rainwater harvesting systems to be installed.

Rainplus advantages:• Economical - compared to conventional downpipe systems, Rainplus allows for a

reduction in pipe diameter and the number of downpipes needed, reducing installation costs by up to 30%.

• Space saving - no fall needed on collector pipes.• High performance - increased velocity and drainage over conventional systems.• Time and labour saving - less pipes means shorter install times.• Increased design flexibility - complete control over downpipe location.

The Rainplus siphonic system is made up of special roof outlets that are designed and tested according to ASME A112.6.9 and EN1253. These outlets are connected to Valsir HDPE pipe and fittings which are sized in order to work under negative pressures, at high flow rates and with a full bore. This is possible thanks to the special configuration of the Rainplus roof outlets which prevent air from entering the pipe when the design rainfall intensity value is reached.

For further information or to request a brochure please contact your Total Eden representative.


STORMWATER SYSTEMSSTORMWATER SYSTEMS

SIPHONIC OUTLET - COMPLETE SCREWS

PLATES

SEALS

OVERFLOW KITS

RAINPLUS OUTLETS - STRAIGHT SPIGOT

RAINPLUS OUTLETS - 90O CURVED SPIGOT

ANTI-LEAF GRATING

ADAPTOR

VALSIR RAINPLUS SIPHONIC SYSTEM

40MM - 110MM

1 - 65LT PER SECOND

40MM - 110MM

SUIT RAIN PLUS OUTLETS

320MM X 320MM - FOR

INSTALLATION IN GUTTERS

520MM X 520MM - GAL - FOR

WATERPROOF COVERINGS

FOR METAL PLATES

FOR 56MM OUTLET

FOR 110MM OUTLET

56MM - 180MM - ROUND

S/S FLANGE

56MM - 420MM - SQUARE

S/S FLANGE

56MM - 180MM - ROUND

S/S FLANGE

56MM - 420MM - SQUARE

S/S FLANGE

40MM - 110MM - SUITS 110MM

RAIN PLUS OUTLET

40MM - 110MM - SUITS 110MM

RAINPLUS OUTLET

100413814

100418890

100411938

100411939

100420104

100413384

100413383

100407475

100407477

100407474

100407478

100398349

100397743


DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE For a full range of pipe and fittings to suit Rainplus outlets see Valsir HDPE section - pages 13.

Refer to manufacturers’ website for technical specifications and infromation. www.valsir.it


STORMWATER SYSTEMS

PVC STORMWATER PIPE AND FITTINGSPLAIN PIPE - 6M LENGTHS - SWJ

SLOTTED PIPE - 6M LENGTHS - SWJ

15O BEND

45O JUNCTIONS

87O & 90O JUNCTIONS


45O BENDS

90O BENDS

22O BEND

75MM

90MM

150MM

175MM [200MM OD]

225MM

300MM

375MM

90MM

90MM F+F

90MM F+F

150MM F+F

150MM F+F - BUTTHEAD




75MM F+F

90MM F+F

150MM F+F





150 X 100MM F+F - BUTTHEAD







300 X 225MM F+F - BUTTHEAD75MM F+F

90MM F+F

90MM M+F

150MM F+F

150MM M+F





90MM F+F

150MM F+F





90MM F+F

100414951

100414952

100414944

100414945

100414946

100414947

100414948

100414954

100399338

100410639

100410604

100410605

100410607

100410637

100410638

100422787

100410696

100410693

100410667

100410668

100410669

100410695

100410606

100410768

100410769

100410770

100410771

100410773

100410774

100410772100399532

100399536

100399541

100399533

100399524

100399492

100399493

100399494

100399495

100399753

100399750

100399678

100399679

100399680

100399681

100399391

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE


STORMWATER SYSTEMS


COUPLINGS

THREADED CAPS

PUSH-ON CAP

SLIP COUPLINGS - RRJ

THREADED COUPLING

REDUCING COUPLINGS

PVC STORMWATER FITTINGS







75MM

150MM - BUTTHEAD

175MM - BUTTHEAD

225MM - BUTTHEAD

300MM - BUTTHEAD

90MM

75MM

90MM

150MM

300MM

175MM - BUTTHEAD

225MM - BUTTHEAD

300MM - BUTTHEAD

90MM

225MM - BUTTHEAD - GREY

300MM - BUTTHEAD - GREY

90MM

100MM X 90MM

100MM X 90MM M+F

100410778

100410779

100410780

100410782

100410783

100410781

100404161

100404249

100458301

100404250

100404251

100401752

100401664

100401660

3279035

100401662

100401666

100401661

100401667

100404197

100404194

100404195

100404162

100417842

100404117

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

CODE

CODE

CODE

SOCKET REDUCERS

REDUCERS - M+F

100MM X 90MM

150MM X 100MM

175 X 150MM - FLAT - BUTTHEAD

175 X 150MM - LIT - BUTTHEAD









100419670

254 0120

100400618

100411512

100400619

100417780

100417778

100411513

100417779

100411514

100423772

100417782

DESCRIPTION

DESCRIPTION

CODE

CODE

ACCESS CAP & COUPLINGS - LUGGED - SWJ

225MM - BUTTHEAD

MOULDED GREY

300MM - BUTTHEAD

MOULDED GREY

100401420

100401422

DESCRIPTION CODE


STORMWATER SYSTEMS

IN-LINE REFLUX VALVE

NUT AND CLIP - M10

FLEXIBLE JOINER

GRATES - POLYPROPYLENE

GUTTER POPS - PVC

PIPE CLIPS

PEAR CLIPS

DOWNPIPE ADAPTORS

150MM

225MM

150MM - NYLON COATED

175MM - ZINC COATED



90MM

150MM

90MM - MULTI FIT

40MM

50MM

90MM

75MM

90MM

90MM - NYLON COATED WHITE

100MM

150MM - WHITE

100MM

150MM

100MM PRESSURE X 100MM

DWV - ROUND ADAPTOR

90MMØ X 100MM X 50MM -

RECTANGLE ADAPT

90MMØ X 100MM X 80MM -

RECTANGLE ADAPTOR

90MMØ X 100MM X 100MM -

SQUARE ADAPTOR

150MMØ X 150MM X 100MM -

RECTANGLE ADAPTOR

150MMØ X 150MM X 150MM -

SQUARE ADAPTOR

90MM X 40MM X 50MM X 65MM X

75MM - MULTI ROUND ADAPT

90MM X 50MM - ROUND

ADAPTOR

100426152

100426272

100402764

100402765

100402766

100402767

100410916

100403249

100409073

100409405

100409404

100409408

100414102

100414103

100418928

100414104

100414088

480 6000

480 6005

100397635

100397607

100397609

100397610

100397618

100397619

100398100

100397621

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE

PVC STORMWATER FITTINGS

CLIPS AND SADDLES

ALL THREAD ROD AND FIXINGS

10MM X 3M THREADED ROD



100418459

100405381

100417187

DESCRIPTION CODE


STORMWATER SYSTEMS

WARNING TAPES


PRIMING FLUIDS

DUCT & TEFLON TAPES


SPOT MARKING PAINT

100M X 80MM - RECYCLED -

LILAC - NON DETECTABLE


LILAC - NON DETECTABLE


LILAC - DETECTABLE


LILAC - DETECTABLE

100M X 80MM - RAINWATER -

GREEN - NON DETECTABLE

300M X 150MM - SEWER -

BLACK - DETECTABLE

100M X 150MM - POTABLE -

BLUE - DETECTABLE

125ML - BLUE

250ML - BLUE

250ML - CLEAR

500ML - BLUE

500ML - CLEAR

1LT - BLUE

4LT - BLUE

4LT - CLEAR

20LT - CLEAR

250ML - RED

250ML - CLEAR

500ML - RED

500ML - CLEAR

1LT - RED

4LT - RED

4LT - CLEAR

DUCT TAPE


10M X 12MM TEFLON TAPE PINK


CLEAR NEUTRAL CURE


SILICONE - CHARCOAL

1LT 2 PART FERROPREE

EPOXY JOINING COMPOUND

500ML RRJ LUBRICANT

1LT RRJ LUBRICANT

RED

YELLOW

WHITE

FLURO PINK

BLUE

BLACK

452 3645

480 5560

480 5565

480 5580

100422319

100422312

100422315

100420283

100420285

100420288

100420287

100420289

100420284

100420286

100420279

100420258

100416981

100416976

100416983

100416978

100416980

100416982

100416977

100422272

308 1640

480 5665

480 5680

480 5695

100406847

330 0884

100411653

100413930

100413931

100413927

100413933

100413928

992 0797

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

CODE

CODE

CONSUMABLES


TRENCHING SHOVEL

PLUMBERS SHOVEL

GARDEN SPADE

100419330

100419318

100420315

DESCRIPTION CODE


STORMWATER SYSTEMS

SN8 BLACKMAX CORRUGATED PIPE - 6M - RRJ

SN8 STORMPRO CORRUGATED PIPE - 6M - RRJ

45O STORMPRO BENDS - SN10 - RRJ

90O STORMPRO BENDS - SN10 - RRJ

45O STORMPRO JUNCTIONS - SN10 - RRJ

45O STORMPRO REDUCING JUNCTIONS - SN10 - RRJ

STORMPRO ADAPTORS

STORMPRO HOLE SAW

225MM

300MM

375MM

450MM

525MM

600MM

150MM

225MM

300MM

375MM

450MM

525MM

600MM

750MM

900MM

150MM

300MM

150MM

300MM

150MM

225MM X 150MM

300MM X 150MM

225MM PVC X PRO - SWJ

225MM PVC X PRO - RRJ

100MM

150MM

100414062

4605350

100414064

100414061

100414065

100414066

100415030

100415031

100415032

100415033

100415034

100415035

100415036

100415037

100415038

100399543

2310040

231 0020

100399763

100410652

100410653

100410654

100398023

100397997

100409672

100409673

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE

BLACKMAX PIPE / STORMPRO PIPE AND FITTINGS

Other fittings are available on request. Contact your TOTAL EDEN sales representative for further information.


STORMWATER SYSTEMS

SLOTTED CORRUGATED DRAIN PIPE - CLS400



UNSLOTTED CORRUGATED DRAIN PIPE - CLS400

45O Y JUNCTION

ADAPTOR

90O T JUNCTION

CROSSNYLON FILTER SOCKS

COUPLINGS

CAP

50MM X 10M

50MM X 20M

50MM X 20M + NYLON SOCK

50MM X 200M

65MM X 10M

65MM X 20M


65MM X 200M


100MM X 10M

100MM X 20M


100MM X 100M


160MM X 20M

160MM X 60M

160MM X 60M - WITH NYLON

SOCK

100MM X 100M

100MM X 100M - WITH NYLON

SOCK

50MM X 20M

50MM X 200M

65MM X 20M

100MM X 20M

100MM X 100M

100MM

100MM X 90MM - F+M

100MM

100MM100MM X 20M

160MM X 60M - RTA

100MM - TO SUIT CLS400

100MM - TO SUIT CLS1000

100MM

4523250

100405227

100405235

100405226

4524795

100405229

100405236

100405228

3274015

4613585

100405223

100405232

100405224

100405233

4804540

2530020

9223913

100405230

100405237

100405240

4554745

100405241

100405239

4554770

100427015

100398150

100422569

4607400 4613195

4804560

100403538

100403539

100406675

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTIONDESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE CODE

CODE

CODE

DRAIN PIPE AND FITTINGS


STORMWATER SYSTEMS

PITS AND DRAINSEVERDRAIN PITS - POLY

EVERDRAIN PIT EXTENSIONS - POLY

PRECAST CONCRETE ELECTRICAL PIT

ALL STORM PITS AND GRATES

POLYCRETE PIT - P90

GRATE AND FRAMES

EVERDRAIN GRATES TO SUIT PITS

200MM X 200MM - WITH

ALUMINIUM GRATE

200MM X 200MM

300MM X 300MM

450MM X 450MM

600MM X 600MM

300MM X 300MM X 450MM

450MM X 450MM

600MM X 600MM

900MM X 900MM

X 900MM DEEP

225MM

300MM

900MM X 900MM

X 600MM DEEP

450MM X 450MM - LIGHT DUTY

450MM X 450MM - HEAVY DUTY



600MM X 600MM - EXTRA HEAVY



600MM X 900MM - EXTRA HEAVY

200MM - POLY

200MM X 200MM - ALUMINIUM

300MM - ALUMINIUM

300MM - GALVANISED

450MM - GALVANISED

600MM - GALVANISED

4805070

100415349

100415350

100415351

100415352

4805080

100415341

100415342

256 0200

100415356

100415357

256 0210

256 0080

256 0090

256 0100

256 0110

256 0120

256 0130

256 0140

256 0150

100409066

9062015

100409083

4805055

100409063

100409062

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CONCEALED INFILL COVERS

DUCTILE COVERS

CONCRETE FLUSH OUT RISER

SUBSOIL BATTER OUTLETS

SUBSOIL DRAINAGE PIT & COVER - CONCRETE S1


- CLASS B


- CLASS D

900MM X 900MM - ELECTRICAL

- CLASS B

900MM X 900MM - COMMS -

CLASS B

CONCRETE FLUSH OUT

RISER

100MM

SINGLE - VIC ROADS

APPROVED

DOUBLE - VIC ROADS

APPROVED

600MM - PIT - S1 TYPE

COVER - S1 TYPE

PIT & COVER - S1 TYPE

2560160

2560170

2560180

2560190

100418158

2560240

2560000

2560010

3322456

3322458

100415355

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

CODE

Other sizes are available on request.



STORMWATER SYSTEMS


STORMWATER SYSTEMSSTORMWATER SYSTEMS


DRAINAGE AND RAINWATER OUTLETS Premium commercial drains, grates and cleanouts.

with the lowest levels of water accumulation on Galvin Engineering floor drains, wastes, cleanouts and rainwater outlets are ideal for commercial and municipal environments. Manufactured from heavy duty materials including grade 316 stainless steel, they are hard-wearing, reliable and have been designed with end-user flexibility in mind.

The new Slip-Safe® and Safe-Cell® ranges are designed to maximise safety in areas such as commercial bathrooms, public swimming pools and correctional centres where there is a higher risk of injury.

Galvin Engineering products have a strong reputation for quality and reliability and have been used in some of Australia’s most recognised buildings and organisations including the Sydney Opera House, Hungry Jacks Restaurants and Coles Supermarkets.

Manufactured to exacting AS1589 standards, Galvin Engineering products are approved for floor drain grates and bolted cleanouts. Total Eden stock a comprehensive range of commercial drainage, rainwater outlets and associated products. We are also leaders in providing product solutions across a range of plumbing and drainage applications.

For further information on Total Edens commercial grade drainage products please contact your representative.


STORMWATER SYSTEMS

COMMERCIAL FLOOR WASTES & SLIP-SAFE CLEANOUTSROUND FLOOR DRAIN GRATE & BOLTED CLEANOUT ASSEMBLIES

SQUARE FLOOR DRAIN GRATE ASSEMBLIES

GRATE - PUSH IN

GRATE - PUSH IN

CLEANOUT - PUSH IN

GRATE - SCREW IN

GRATE - SCREW IN

GRATE CODE CLEANOUT CODE TOP(A)

OUTLET(B)

DEPTH(C)

HEIGHT(D)

CONNECTION TYPE316 ST ST

100405179 100 50 25 53 PVC

100405181 67710X 100 80 25 45 PVC

100405180 100 80 46 56 Thread

100405183 100402796 150 100 25 53 PVC/HDPE/Cu

100405182 150 100 40 63 Thread

100405184 100402798 200 150 30 57 PVC/HDPE

316 ST STCODE

TOP(A)

OUTLET(B)

DEPTH(C)

HEIGHT(D)

CONNECTION TYPE

100405185 100 50 25 50 PVC

100405187 100 80 25 47 PVC

100405186 100 80 40 60 Thread

100405188 150 100 25 57 PVC/HDPE/Cu

100405189 150 100 40 66 Thread

100405190 200 100 25 67 PVC/HDPE/Cu

100405191 200 100 40 76 Thread

100405192 200 150 40 69 Thread

100405193 300 100 25 92 PVC/HDPE/Cu

100405194 300 150 25 92 PVC/HDPE

100405195 300 150 40 84 Thread

All dimensional measurements are in millimetres



STORMWATER SYSTEMS



COMMERCIAL FLOOR WASTES & SLIP-SAFE CLEANOUTSVINYL FLOOR DRAIN GRATE & BOLTED CLEANOUT ASSEMBLIES

SPECIALISED CLEANOUT

VINYL GRATE - PUSH IN

CP INSPECTION COVER

VINYL CLEANOUT - PUSH IN

CP Inspection Cover - Square 150 x 100 (Coles / BiLo)- Brass Inspection Cover designed for supermarkets- 100mm flush removable bayonet lid- 4 x 5mm countersunk screw holes

VINYL GRATE - SCREW IN VINYL CLEANOUT - SCREW IN

GRATE CODE CLEANOUT CODE TOP(A)

OUTLET(B)

DEPTH(C)

HEIGHT(D)

CONNECTION TYPE316 ST ST 316 ST ST

303172X 100 50 25 68 PVC

303176X 69457X 100 80 25 53 PVC

303198XP 69468XP 150 100 25 60 ABS Body PVC/HDPE/Cu

303198X 69468X 150 100 25 64 PVC/HDPE/Cu

303149X 69408X 150 100 40 73 Thread

303164X 200 150 40 77 Thread

303200 69475X 200 150 40 77 PVC/HDPE

BSCODE

CPCODE

TOP(A)

OUTLET(B)

DEPTH(C)

HEIGHT(D)

CONNECTION TYPE

67050C 60755C 150 100 21 24 Cu

67050P 67055P 150 100 21 24 PVC/HPDE


STORMWATER SYSTEMS

FLOOR DRAIN COMBINATIONSVERTICAL DRAIN COMBINATIONS - STANDARD BODY

VERTICAL DRAIN COMBINATIONS - MULTI-PURPOSE

GRATE - ROUND

GRATE - ROUND

GRATE - SQUARE

GRATE - SQUARE

GRATE - VINYL

GRATE - VINYL

CODE GRATESTYLE

GRATEMATERIAL

BODYMATERIAL

TOP(A)

OUTLET(B)

BODY HEIGHT (C)

GRATE HEIGHT (D)

ADJ(E)

CONNECTION TYPE

DV2S04RX Round 316 St St CI 100 50 81 27 48 PVC/HDPE

DV3S04RX Round 316 St St CI 100 80 81 27 48 PVC

DV4S06RX Round 316 St St CI 150 100 92 35 58 PVC/HDPE

DV4S06VX Vinyl 316 St St CI 150 100 92 35 58 PVC/HDPE

DV2S04SX Square 316 St St CI 100 50 81 27 48 PVC/HDPE

DV3S04SX Square 316 St St CI 100 80 81 27 48 PVC



CODE GRATESTYLE

GRATEMATERIAL

BODYMATERIAL

TOP(A)

OUTLET(B)

BODY HEIGHT (C)

MIN GRATE HEIGHT (D)

MAX ADJ(E)

CONNECTION TYPE

DE4S06RX Round 316 St St DI 150 100 100 30 25 PVC/HDPE

DE4S06VX Vinyl 316 St St DI 150 100 100 40 25 PVC/HDPE

DE6S08VX Vinyl 316 St St DI 200 150 98 45 25 PVC/HDPE

DE4S06SX Square 316 St St DI 150 100 100 35 25 PVC/HDPE








STORMWATER SYSTEMS

FLOOR TRAP COMBINATIONSBUCKET TRAP COMBINATIONS - SINGLE STRAINER - STANDARD BODY

BUCKET TRAP COMBINATIONS - SINGLE STRAINER - MULTI-PURPOSE

GRATE - ROUND

GRATE - ROUND

GRATE - SQUARE

GRATE - SQUARE

GRATE - VINYL

GRATE - VINYL

CODE GRATESTYLE

GRATEMATERIAL

BODYMATERIAL

TOP(A)

OUTLET(B)

BODY HEIGHT (C)

GRATE HEIGHT (D)

ADJ(E)

CONNECTION TYPE

DB4S06RX Round 316 St St CI 150 100 92 34 60 PVC/HDPE

DB4S06VX Vinyl 316 St St CI 150 100 92 34 60 PVC/HDPE

DB4S06SX Square 316 St St CI 150 100 92 34 60 PVC/HDPE

DB4S08SX Square 316 St St CI 200 100 92 34 60 PVC/HDPE

CODE GRATESTYLE

GRATEMATERIAL

BODYMATERIAL

TOP(A)

OUTLET(B)

BODY HEIGHT (C)

GRATE HEIGHT (D)

ADJ(E)

CONNECTION TYPE

DEB4S06RX Round 316 St St CI 150 100 100 30 25 PVC/HDPE

DEB4S06VX Vinyl 316 St St CI 150 100 100 40 25 PVC/HDPE



DEB4S06SX Square 316 St St CI 150 100 100 35 25 PVC/HDPE

DEB4S08SX Square 316 St St CI 200 100 100 45 25 PVC/HDPE




STORMWATER SYSTEMS

FLOOR TRAP COMBINATIONSBUCKET TRAP COMBINATIONS - DUAL STRAINER - DEEP BODY

GRATE - VINYL GRATE - SQUARE



BUCKET TRAP COMBINATIONS - DUAL STRAINER - MULTI-PURPOSE

GRATE - SQUARE

CODE GRATESTYLE

GRATEMATERIAL

BODYMATERIAL

TOP(A)

OUTLET(B)

BODY HEIGHT (C)

GRATE HEIGHT (D)

ADJ(E)

CONNECTION TYPE

DB4D08VX Vinyl 316 St St CI 200 100 235 34 60 PVC/HDPE

DB4D08SX Square 316 St St CI 200 100 235 34 60 PVC/HDPE

DB4D12SX Square 316 St St CI 300 100 235 34 60 PVC/HDPE

CODE GRATESTYLE

GRATEMATERIAL

BODYMATERIAL

TOP(A)

OUTLET(B)

BODY HEIGHT (C)

GRATE HEIGHT (D)

ADJ(E)

CONNECTION TYPE

DEB4D08SX Square 316 St St CI 200 100 100 40 25 PVC/HDPE

DEB4D12SX Square 316 St St CI 300 100 100 65 25 PVC/HDPE


STORMWATER SYSTEMS

FLOOR DRAIN & FLOOR TRAP COMBINATIONSINDUSTRIAL WASTE COMBINATIONS - DUAL STRAINER

SINGLE STRAINER

SINGLE STRAINER

SINGLE STRAINERDUAL STRAINER

DUAL STRAINER

DUAL STRAINER

GRATE - ROUND

GRATE - VINYL

GRATE - SQUARE


CODE GRATE STYLE MATERIAL TOP(A)

OUTLET(B)

DEPTH (C)

HEIGHT (D)

(E)

CONNECTION TYPE

100409070 ROUND - Single Strainer 316 St St 150 100 25 28 92 PVC/HDPE/Cu

100409069 ROUND - Dual Strainer 316 St St 150 100 25 28 114 PVC/HDPE/Cu

100409085 VINYL - Single Strainer 316 St St 150 100 25 42 96 PVC/HDPE/Cu

100409084 VINYL - Dual Strainer 316 St St 150 100 25 42 114 PVC/HDPE/Cu

100409080 SQUARE - Single Strainer 316 St St 150 100 25 34 95 PVC/HDPE/Cu

100409079 SQUARE - Dual Strainer 316 St St 150 100 25 34 114 PVC/HDPE/Cu

100409081 SQUARE - Dual Strainer 316 St St 200 100 25 34 114 PVC/HDPE/Cu


STORMWATER SYSTEMS

HORIZONTAL DRAIN COMBINATIONSHORIZONTAL DRAIN COMBINATIONS - BALCONY BODY (NON CLAMP RING)

HORIZONTAL DRAIN COMBINATIONS - BALCONY BODY (WITHCLAMP RING)

GRATE - ROUND

GRATE - ROUND

GRATE - SQUARE

GRATE - SQUARE



CODE GRATESTYLE

GRATEMATERIAL

BODYMATERIAL

TOP(A)

OUTLET(B)

BODY HEIGHT (C)

GRATE HEIGHT (D)

ADJ(E)

CONNECTION TYPE

DH2B04RX Round 316 St St CI 100 50 75 21 35 PVC/HDPE

DH2B04SX Square 316 St St CI 100 50 75 21 35 PVC/HDPE

CODE GRATESTYLE

GRATEMATERIAL

BODYMATERIAL

TOP(A)

OUTLET(B)

BODY HEIGHT (C)

GRATE HEIGHT (D)

ADJ(E)

CONNECTION TYPE

DH2S04RX Round 316 St St CI 100 50 107 25 50 PVC/HDPE

DH4S06RX Round 316 St St CI 150 100 170 31 62 PVC/HDPE

DH2S04SX Square 316 St St CI 100 50 107 25 50 PVC/HDPE

DH4S06SX Square 316 St St CI 150 100 170 31 62 PVC/HDPE


STORMWATER SYSTEMS

PLANTER BOX COMBINATIONS & ACCESSORIESSTAINLESS STEEL STRAINER BASKETS PLANTER BOX ASSEMBLIES



CODE FLANG DIAMETER (L)

LENGTH(J)

BASKET DIAMETER (K)

STRAINER BASKET

100400387 100 125 75

100400388 150 165 125

SECONDARY STRAINER BASKET

100400385 134 125 90

100400386 165 165 140

SECONDARY STRAINER DISC

100421136 183 N/A N/A

CODE TOP(A)

OUTLET(B)

BODYWIDTH

(C)

BOX DRAIN

HEIGHT (D)

ADJ(E)

WIDTH(C)

CONNECT.TYPE

DV3S03P 80 80 81 550 40 PVC

DV4S04P 100 100 92 550 40 PVC/HDPE

STRAINER BASKET

SECONDARY STRAINER BASKET SECONDARY STRAINE DISC

FEMALE PVC CONNECTORMALE PVC CONNECTOR

PVC Connector 50FI BSP X 50PVCPVC Connector 80FI BSP X 80PVCPVC Connector 100FI BSP X 100PVC PVC Connector 150FI BSP X 150PVC

PVC Connector 50 MI BSP X 50PVCPVC Connector 80 MI BSP X 80PVCPVC Connector 100 MI BSP X 100PVCPVC Connector 150 MI BSP X 150PVC

100405177 100405178 100405175 100405176

100403369 100403370 100403368 100397915

DESCRIPTIONDESCRIPTION CODE CODE


STORMWATER SYSTEMS

MULTI-PURPOSE VERTICAL RAIN WATER OUTLETS



FLAT VERTICAL ROOF OUTLET - WITHOUT MEMBRANE DOMED VERTICAL ROOF OUTLET - WITH MEMBRANEAND CLAMP RING

FLAT VERTICAL ROOF OUTLET - WITH MEMBRANE AND CLAMP RING

CLAMP RING STYLE - FLAT OR DOMED GRATE PUDDLE FLANGE STYLE - FLAT OR DOMED GRATE

CODE GRATEMATERIAL

BODYMATERIAL A B C D CONNECT.

TYPE285007 DI DI 245 100 260 100 PVC/HDPE

285021 DI DI 245 150 270 98 PVC/HDPE

CODE GRATEMATERIAL

BODYMATERIAL A B C D CONNECTION

TYPEFLAT GRATE

282608 AL CI 50 250 105 Thread

282616 AL CI 80 250 135 Thread

DOMED GRATE

282483 AL CI 50 250 105 65 Thread

282491 AL CI 80 250 135 65 Thread

CODE GRATEMATERIAL

BODYMATERIAL A B C D E F CONNECT.

TYPE285205 DI DI 223 100 260 100 240 75 PVC/HDPE

285219 DI DI 223 150 270 98 240 75 PVC/HDPE

CODE GRATEMATERIAL

BODYMATERIAL A B C D E F CONNECT.

TYPEFLAT GRATE

282889 AL CI 50 250 105 58 215 Thread

282897 AL CI 80 250 135 58 215 Thread

DOMED GRATE

282764 AL CI 50 250 105 65 58 215 Thread

282772 AL CI 80 250 135 65 58 215 Thread

CODE GRATEMATERIAL

BODYMATERIAL A B C D E CONNECT.

TYPE285101 DI DI 224 100 260 100 240 PVC/HDPE

285115 DI DI 224 150 270 98 240 PVC/HDPE

90o RAIN WATER OUTLET COMBINATIONS


STORMWATER SYSTEMS

STANDARD VERTICAL RAIN WATER OUTLETS

All dimensional measurements are in millimetresAll dimensional measurements are in millimetres


CLAMP RING STYLE - FLAT OR DOMED GRATE

INTEGRAL MEMBRANE STYLE - FLAT OR DOMED GRATE

PUDDLE FLANGE STYLE - FLAT OR DOMED GRATE

CODE SIZE GRATEMATERIAL

BODYMATERIAL

A(NOM) B C D CONNECTION

TYPEFLAT GRATE

279976 50 AL CI 50 245 95 PVC/HDPE

280107 80 AL CI 80 245 90 PVC

DOMED GRATE

279950 50 AL CI 50 245 95 65 PVC/HDPE

280081 80 AL CI 80 245 90 65 PVC


BODYMATERIAL

A(NOM) B C D E F CONNECTION

TYPEFLAT GRATE

280016 50 AL CI 50 245 95 55 215 PVC/HDPE

280149 80 AL CI 80 245 90 55 215 PVC

DOMED GRATE

279992 50 AL CI 50 245 95 65 55 215 PVC/HDPE

280123 80 AL CI 80 245 90 65 55 215 PVC


BODYMATERIAL

A(NOM) B C D E F CONNECTION

TYPEFLAT GRATE

280057 50 AL CI 50 245 95 68 215 PVC/HDPE

280180 80 AL CI 80 245 90 68 215 PVC

DOMED GRATE

280032 50 AL CI 50 245 95 65 68 215 PVC/HDPE

280164 80 AL CI 80 245 90 65 68 215 PVC


STORMWATER SYSTEMS

SIDE VIEW TOPVIEW

CODE GRATEMATERIAL

BODYMATERIAL A B C D E

(NOM) F CONNECTION TYPE

100405212 304 St St CI 50 150 69 104 58.5 10 Thread

100405210 304 St St CI 80 205 120 145 120 10 Thread

100405211 304 St St CI 100 280 162 190 120 10 Thread

283031 304 St St CI 150 277 162 190 112 10 Thread

PARAPET STYLE RAIN WATER OUTLET

SAFE-CELL PRISON FLOOR WASTES


CODE GRATE STYLE MATERIAL TOP(A)

OUTLET(B)

DEPTH(C)

HEIGHT(D)

CONNECTION TYPE

303077 CRR - VINYL NI BZ 100 80 40 63 THREAD

303070X CRR - STANDARD 55304 100 80 40 40 THREAD

303077X CRR - VINYL 55304 100 80 40 61 THREAD

303079X CRR - VINYL 55304 150 100 40 73 THREAD


CRR - VINYL STYLE GRATE CRR - STANDARD STYLE GRATE


STORMWATER SYSTEMS

STAINLESS STEEL DRAINAGE (ALDI SPEC)

TUNDISH COVER (ALDI SPEC)

CLEANOUT (ALDI SPEC)

FLOOR WASTE (ALDI SPEC)

CLEANER SINK (ALDI SPEC)

FLOOR SUMP (ALDI SPEC)

150MM - STAINLESS STEEL



600MM X 600MM- S/S

300MM STAINLESS STEEL

100402235

100402238

100402236

100419377

100402237

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

CODE


PVC PRESSURE PIPE AND FITTINGS


PVC Pressure Pipe SWJ: 15mm - 300mm

PVC Pressure Pipe RRJ: 50mm - 375mm

PVC Moulded Pressure Fittings: 15mm - 375mm

Clips and Saddles

Pressure Solvent Cements & Primers

Total Eden supply PVC S1 Solvent Weld Joint (SWJ) pressure pipe and fittings from 15mm to 375mm and are available in PN ratings 6, 9, 12 and 18. PVC SWJ pressure pipe is light weight with excellent hydraulic flow.

PVC S1 Rubber Ring Joint (RRJ) pipes are available from 50mm to 375mm with PN ratings of 6, 9 and 12. PVC RRJ pressure pipe is suitable for industrial process pipelines, potable water, pool and spa, air conditioning and waste water treatment plants.

Total Eden's own range of BUTT-HEAD pressure fittings are a cost-effective alternative without sacrificing quality. Butt-head fittings offer a full range of bushes, couplings, elbows, sockets, tees and unions from 15mm to 150mm enabling complete installation for most applications. All Butt-head pressure fittings 100mm and smaller are rated to PN18 while 150mm fittings are rated PN12.




Slotted and Threaded PVC Pressure Pipe are available on request.

PVC PRESSURE PIPEPN6 uPVC PIPE - 6M LENGTHS - SWJ

PN9 uPVC PIPE - 6M LENGTHS - SWJ



PN6 PVC PIPE - 6M LENGTHS - RRJ



40MM

50MM

80MM

100MM

150MM

200MM

25MM

32MM

40MM

50MM

80MM

100MM

125MM

150MM

200MM

20MM

25MM

32MM

40MM

50MM

65MM

80MM

100MM

125MM

150MM

155MM

200MM

225MM

250MM

300MM

15MM

20MM

25MM

32MM

40MM

50MM

65MM

80MM

100MM

125MM

150MM

200MM

80MM

100MM

150MM

200MM

250MM

300MM

375MM

80MM

100MM

150MM

200MM

250MM

300MM

50MM

80MM

100MM

150MM

200MM

225MM

250MM

300MM

100415077

100415078

100415079

100415075

100415076

100414865

100415087

100415088

100415089

100415090

100415091

100415081

100415082

100415083

100415085

100415054

100414856

100414857

100414858

100415058

100414860

100415059

100415048

100415049

100415050

100414057

100415052

100415055

100415056

100415057

100415060

100415061

100415062

100415063

100415064

100415065

100415066

100415067

100414863

100415092

100414864

100415093

100415074

100415068

100415069

100415070

100415072

100415073

4554805

100415080

100414650

100414866

100414867

100414651

100414652

100414089

100414855

100414851

100414646

100414647

100458193

100414648

100414854

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

CODE

CODE

CODE




PVC PRESSURE FITTINGSCAT 2 MI ADAPTORS - PN18

CAT 3 FI ADAPTORS

CAT 5 REDUCING BUSHES

CAT 6 CAPS

15MM X 1/2” 20MM X 1/2” 20MM X 3/4” 25MM X 3/4” 25MM X 1” 32MM X 1 1/4” 40MM X 3/4” 40MM X 1” 40MM X 1 1/2” 50MM X 1 1/2” 50MM X 2” 80MM X 3” - PN15

15MM X 1/4” - NPT - SCH4015MM X 3/8” - NPT - SCH4015MM X 1/2” - PN1820MM X 1/2”- PN1820MM X 3/4” - PN1825MM X 1/2”- NPT - SCH4025MM X 3/4” - NPT - SCH4025MM X 1” - PN1832MM X 1/2” - PN1832MM X 1” - NPT - SCH4032MM X 1 1/4” - PN1840MM X 1/2” - NPT - SCH4040MM X 3/4” - PN1840MM X 1” - PN1840MM X 1 1/4” - PN1840MM X 1 1/2” - PN1850MM X 1/2” - NPT - SCH4050MM X 3/4” - NPT - SCH4050MM X 1” - PN1850MM X 2” - PN1880MM X 3” - PN15100MM X 4” - PN15

20MM X 15MM - PN18

25MM X 15MM - PN18

25MM X 20MM - PN18

32MM X 15MM - SCH40

32MM X 20MM - PN18

32MM X 25MM - PN18

40MM X 15MM - SCH40

40MM X 20MM - SCH40

40MM X 25MM - PN18

40MM X 32MM - PN18

50MM X 15MM - SCH40

50MM X 20MM - SCH40

50MM X 25MM - PN18

50MM X 32MM - SCH40

50MM X 40MM - PN18

65MM X 50MM - PN18

80MM X 25MM - SCH40

80MM X 40MM - SCH40

80MM X 50MM - PN18

100MM X 50MM - PN18

100MM X 80MM - PN18

150MM X 100MM - PN18

200MM [225MM OD] X 150MM

[160MM OD] - PN9*

225MM [250MM OD] X 150MM

[160MM OD] - PN10*

225MM [250MM OD] X 200MM

[225MM OD] - PN10*

250MM [280MM OD] X 150MM

[160MM OD] - PN10*

250MM [280MM OD] X 200MM

[225MM OD] - PN10*

250MM [280MM OD] X 225MM

[250MM OD] - PN10*

300MM [315MM OD] X 150MM

[160MM OD] - PN8*

300MM [315MM OD] X 200MM

[225MM OD] - PN8*

300MM [315MM OD] X 225MM

[250MM OD] - PN8*

300MM [315MM OD] X 250MM

[280MM OD] - PN8*

375MM [400MM OD] X 225MM

[250MM OD] - PN5*

375MM [400MM OD] X 250MM

[280MM OD] - PN5*

375MM [400MM OD] X 300MM

[315MM OD] - PN5*

15MM - PN1820MM - PN1825MM - PN1832MM - PN1840MM - PN1850MM - PN1865MM - PN1880MM - PN15100MM - PN15125MM - PN18 - DIN150MM - PN18155MM - SCH80195MM - SCH80200MM - PN10*

100426436100403893100426437100398216100426438100398218100398224100398225100426439100398232100426440100426442

100397735100397734100397693100397733100397694100397698100397736100397696100397701100397700100397699100397708100397704100397705100397707100397702100397740100397739100397710100397709100397712100397692

100400789

100400791

100400790

100400780

100400713

100400792

100400782

100400704

100400793

100400794

100400785

100400706

100400795

100400784

100400796

100400797

100400698

100400709

100400798

100400786

100400787

100400788

100400672

100400677

100400678

100400679

100400680

100400681

100400687

100400684

100400685

100400686

100400702

100400689

100400690

100401684100401685100401686100401687100401688100401689100401682100401683100401679100401680100401681100401767100401694100401671

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

* Denotes gap filling solvent cement must be used.

NOTE: Fittings 155mm and above are grey in colour.



PVC PRESSURE FITTINGSCAT 7 COUPLINGS

CAT 10 45O ELBOWS

CAT 8 REDUCING COUPLINGS

15MM - PN18

20MM - PN18

25MM - PN18

32MM - PN18

40MM - PN18

50MM - PN18

65MM - PN18

80MM - PN15

100MM - PN18

125MM - PN6 - FABRICATED

150MM - PN18

155MM - SCH80

195MM - SCH80

200MM [225MM OD] - PN10*

225MM [250MM OD] - PN10*

250MM [280MM OD] - PN10*

300MM [315MM OD] - PN8*

375MM [400MM OD] - PN5*

15MM - PN18

20MM - PN18

25MM - PN18

32MM - PN18

40MM - PN18

50MM - PN18

65MM PN15

80MM - PN15

65MM - PN18

100MM - PN15

125MM - PN6 - FABRICATED

150MM - PN18

155MM - SCH80

195MM - SCH80

200MM [225MM OD] - PN10*

225MM [250MM OD] - PN10*

250MM [280MM OD] - PN10*

300MM [315MM OD] - PN8*

20MM X 15MM - PN18

25MM X 15MM - PN18

25MM X 20MM - PN18

32MM X 20MM - PN18

32MM X 25MM - PN18

40MM X 15MM - PN18

40MM X 20MM - PN18

40MM X 25MM - PN18

40MM X 32MM - PN18

50MM X 25MM - PN18

50MM X 32MM - PN18

50MM X 40MM - PN18

65MM X 50MM - PN18

80MM X 50MM - PN15

80MM X 65MM - PN15

100MM X 50MM - PN15

100MM X 80MM - PN15

125MM X 100MM - PN18

150MM X 100MM - PN18

155MM X 100MM - SCH80

200MM [225MM OD] X 150MM

[160MM OD] - PN10*

225MM [250MM OD] X 200MM

[225MM OD] - PN10*

250MM [280MM OD] X 200MM

[225MM OD] - PN10*

250MM [280MM OD] X 225MM

[250MM OD] - PN10*

300MM [315MM OD] X 150MM

[160MM OD] - PN8*

300MM [315MM OD] X 200MM

[225MM OD] - PN8*

300MM [315MM OD] X 225MM

[250MM OD] - PN8*

300MM [315MM OD] X 250MM

[280MM OD] - PN8*

375MM [400MM OD] X 250MM

[280MM OD] - PN8*

375MM [400MM OD] X 300MM

[315MM OD] - PN5*

100403892

100403893

100403894

100403895

100403896

100403897

100403890

100403891

100403888

100403886

100403889

100403903

100403914

100403887

100403898

100403877

100403901

100403900

100405740

100405741

100405742

100405743

100405744

100405745

100405738

100405739

100405738

100405723

100405737

4800985

4800990

100405720

100405746

100405721

100405749

100405748

100404051

100404054

100404053

100404055

100404056

100404060

100404057

100404058

100404059

100404061

100404062

100404063

100404064

100404065

100404066

100404067

100404068

100404069

100404070

100400734

100404023

100404028

100404030

100404029

100404072

100404034

100404035

100404073

100404039

100404071

DESCRIPTION

DESCRIPTION

DESCRIPTION CODE

CODE

CODE





PVC PRESSURE FITTINGS



CAT 13 90O ELBOWS

CAT 15 FI ELBOWS - PN18

180O RADIUS BENDS - SCH40

CAT 16 FULL FACE FLANGES

CAT 16 LOOSE RING FLANGES - GREY

90O SPIGOT X SOCKET STREET ELBOWS - SCH40

45O SPIGOT X SOCKET STREET ELBOWS - SCH40

MOULDED CROSSES - SCH40

15MM - PN1820MM X 15MM - PN1820MM - PN1825MM X 15MM - PN1825MM X 20MM - PN1825MM - PN1832MM - PN1840MM - PN1850MM - PN1865MM - PN1880MM - PN15100MM - PN15125MM - PN6 - FABRICATED150MM - PN18155MM - SCH80195MM - SCH80200MM [225MM OD] - PN10*225MM [250MM OD] - PN10*250MM [280MM OD] - PN10*300MM [315MM OD] - PN8*375MM [400MM OD] - PN5*

15MM X 1/2”20MM X 1/2”20MM X 3/4”25MM X 1/2”25MM X 3/4”25MM X 1”32MM X 1 1/4”40MM X 1 1/2”

40MM50MM

25MM - PN1832MM - PN1840MM - PN1850MM - PN1865MM - PN1880MM - PN15100MM - PN15125MM - PN15150MM - PN15

80MM - ANSI 150, TABLE D/E - SCH80100MM - ANSI 150, TABLE D/E - SCH80150MM [160MM OD] - ANSI 150, DIN 10, TABLE D/E200MM [225MM OD] - ANSI 150, DIN 10, TABLE D/E* - PN10225MM [250MM OD] - ANSI 150, DIN 10 TABLE E* - PN10250MM [280MM OD] - ANSI 150, DIN 10, TABLE E* - PN8300MM [315MM OD] - DIN 10, - PN8

15MM20MM25MM32MM40MM50MM

25MM40MM50MM

15MM20MM25MM32MM40MM50MM80MM100MM100MM X 50MM

100405992100406545100405993100405999100406533100405994100405995100405996100405997100405990100405991100405988100405974100405989100406065 4569275100405939100405972100405978100406001100406000

100406214100406216100406215100406218100406217100406219100406220100406221

100399873100399882

100407427100407428100407429100407430100407431100407432100407423100407510100407424

100407538 100407532 100407512 100407535 100407515 100407540 100407561

100406564100406565100406566100406567100406568100406569

100406560100406561100406562

100404328100404329100404330100404331100404332100404333100404334100404327100404343

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE



PVC PRESSURE FITTINGSSTUB FLANGE & LOOSE RING - GREY

375MM [400MM OD] STUB FLANGE - PN6*375MM [400MM OD] LOOSE RING - DIN 10

100407482 100407483

DESCRIPTION CODE



NOTE: Stainless Steel Backing Rings are also available

(Reducing Tees continued on following page)

CAT 16A GALVANISED BACKING RINGS

CAT 18 FI SOCKETS

CAT 17 MI SOCKETS

CAT 16B - 3MM NEOPRENE FULL FACED GASKETS

CAT 19 STRAIGHT TEES

CAT 19 REDUCING TEES

25MM - TABLE D32MM - TABLE D40MM - TABLE D50MM - TABLE D65MM - TABLE D80MM - TABLE D/E 100MM - TABLE D125MM - TABLE D150MM - TABLE D195MM / 200MM - TABLE E225MM / 250MM - TABLE E300MM - TABLE E

15MM X 1/2” - PN1820MM X 1/2” - NPT - SCH4020MM X 3/4” - PN1825MM X 1/2” - PN1825MM X 3/4” - NPT - SCH4025MM X 1” - PN1832MM X 1 1/4” - PN1840MM X 1 1/2” - PN1850MM X 2” - PN1880MM X 3” - PN15100MM X 4” - PN15

15MM X 1/2” - PN1815MM X 3/4” - NPT - SCH4020MM X 1/2” - NPT - SCH4020MM X 3/4” - PN1820MM X 1”- NPT - SCH4025MM X 3/4” - NPT - SCH4025MM X 1” - PN1832MM X 1 1/4” - PN1840MM X 1 1/2” - PN1850MM X 2” - PN1865MM X 2 1/2” - PN1880MM X 3” - PN15100MM X 4” - PN15

15MM - TABLE D/E20MM - TABLE D/E25MM - TABLE D/E32MM - TABLE D/E40MM - TABLE D/E50MM - TABLE D/E65MM - TABLE D/E80MM - TABLE D/E100MM - TABLE E125MM - TABLE D/E150MM - TABLE D/E195MM / 200MM - TABLE D/E225MM / 250MM - TABLE E250MM - TABLE D250MM - TABLE E300MM - TABLE D/E375MM - DIN 10

15MM - PN1820MM - PN1825MM - PN1832MM - PN1840MM - PN1850MM - PN1865MM - PN1880MM - PN15100MM - PN15125MM - PN6 - FABRICATED150MM - PN18155MM - SCH80195MM - SCH80200MM [225MM OD] - PN10*225MM [250MM OD] - PN10*250MM [280MM OD]- PN10*300MM [315MM OD] - PN8*375MM [400MM OD] - PN5*

20MM X 15MM - PN1825MM X 15MM - PN1825MM X 20MM - PN1832MM X 15MM - PN1832MM X 20MM - PN1832MM X 25MM - PN1840MM X 15MM - PN1840MM X 20MM - PN1840MM X 25MM - PN1840MM X 32MM - PN1850MM X 15MM - PN1850MM X 20MM - PN1850MM X 25MM - PN1850MM X 32MM - PN1850MM X 40MM - PN18

100398560100398608100407149100398566100398567100398568100398548100398652100398640100398641100398651100398563

100419498100419494100419499100419481100419482100419500100419501100419502100419503100419504100419497

100419741100419603100419726100419742100419737100419738100419743100419744100419745100419746100419747100419748100419740

100407366100407368100407369100407371100407372100407373100407374100407375100407364100409243100407365100407367100407377100409242100407378100407370 480 1150

100423059100423060100423061100423062100423063100423064100423057100423058100423055100423023100423056 3271645 3271654100423016100423017100423071100423074100423073

100423237100423229100423238100423230100423239100423240100423243100423241100423242100423231100423049100423244100423245100423232100423246

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

CODE

CODE






CAT 21 FI TEES - PN18

CAT 22 BARREL UNIONS - SWJ

CAT 23 SCREWED PLUGS - PN18

CAT 24 SCREWED BUSHES

90O SIDE OUTLET ELBOWS - THREADED

BULLHEAD TEE

CAT 19 REDUCING TEES (CONTINUED)

15MM X 1/2” 20MM X 1/2” 20MM X 3/4” 25MM X 1/2” 25MM X 3/4” 25MM X 1” 32MM X 1/2” 32MM X 3/4” 32MM X 1” 40MM X 1/2” 40MM X 3/4” 40MM X 1” 50MM X 1/2” - NPT - SCH4050MM X 3/4” 50MM X 1”

15MM - PN1820MM - PN1825MM - PN1832MM - PN1840MM - PN1850MM - PN1865MM - PN1280MM - PN12100MM - PN12

1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 3” 4”

3/8” X 1/4” - NPT - SCH401/2” X 1/4” - NPT - SCH401/2” X 3/8” - NPT - SCH403/4” X 1/4” - NPT - SCH403/4 X 1/2” - NPT - SCH403/4” X 3/8” - NPT - SCH403/4” X 1/2” - PN181” X 1/2” - NPT - SCH401” X 3/4” - PN18

20MM X 1/2” - NPT - SCH4025MM X 1/2” - NPT - SCH40

25MM X 25MM X 40MM - PN18

65MM X 50MM - PN1880MM X 25MM - PN1580MM X 40MM - PN1580MM X 50MM - PN15100MM X 25MM - PN15100MM X 50MM - PN15100MM X 80MM - PN15150MM X 100MM - PN18200MM [225MM OD] X 150MM [160MM OD] - PN10*250MM [280MM OD] X 150MM [160MM OD] - PN10*250MM [280MM OD] X 200MM [225MM OD] - PN10*300MM [315MM OD] X 150MM [160MM OD] - PN8*300MM [315MM OD] X 200MM [225MM OD] - PN8*375MM [400MM OD] X 300MM [315MM OD] - PN5*

100422642100422644100422643100422646100422645100422647100422648100422631100422649100422651100422650100422652100422640100422653100422654

100398786100398787100398788100398789100398790100398791100398795100398793100398785

100415611100415612100415613100415606100415607100415608100415609100415601

100400839100400836100400835100400838 100403833100400837100400833100400840100400834

100406132100406133

100422379

100423247100423248100423249100423250100423020100423234100423235100423236 100423252 100423251 100423253 100423255 100423256 100423254

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION CODE

CODE

CODE

CODE

CODE

CODE

CODE




DESCRIPTION CODE

DESCRIPTION CODE

DESCRIPTION CODE

DESCRIPTION CODE

DESCRIPTION CODE

DESCRIPTION CODE



AIR VENTURI TEES

COMPRESSION COUPLINGS

RUBBER VIBRATION / EXPANSION JOINTS - FLANGED

FI PLASTIC TAPPING SADDLES FOR PVC PIPE

EASY-FIX COUPLINGS SOCKET X SPIGOT

MAXIFIT COMPRESSION COUPLINGS

20MM X 25MM X 20MM - SCH4040MM X 40MM X 20MM - SCH40

15MM20MM25MM32MM40MM50MM80MM100MM

1 1/4” - TABLE D/E1 1/2” - TABLE D/E2” - TABLE D/E2 1/2” - TABLE D/E3” - TABLE D/E4” - TABLE D/E5” - TABLE D/E6” - TABLE D/E8” - TABLE D/E10” - TABLE D/E12” - TABLE D/E

40MM X 3/4”40MM X 1”50MM X 3/4”50MM X 1”80MM X 3/4”80MM X 1”80MM X 1 1/2”80MM X 2” 100MM X 3/4” 100MM X 1” 100MM X 1 1/2” 100MM X 2” 150MM X 3/4” 150MM X 1” 150MM X 1 1/2” 150MM X 2” 155MM X 1” 155MM X 2” 195MM X 2” 200MM X 2”

20MM 25MM 32MM 40MM 50MM 80MM 100MM

80MM - SUITS OD 88.1MM - 102.4MM100MM - SUITS OD 110MM - 127MM150MM - SUITS OD 159MM - 181MM200MM - SUITS OD 218MM - 235MM225MM - SUITS OD 242MM - 262MM250MM - SUITS OD 272MM - 289MM300MM - SUITS OD 315MM - 349MM

100422376100422377

100403484100403485100403486100403487100403488100403489100403490100403483

100289848100289850100406865100406866100406867 100406868100406864100406869100406870100406871100406872

4806065100422046100422012100422047 4814985100422048100422049100422050 2620340100422037 4806075100422039 2620350100422041 2620360100422040100422203100422204100422205100422045

100404132100404133100404134100404135100404136100404137100404130

9144552 100404239 9172415 100404247 9172417 9144534 480 6050



DESCRIPTION CODE

DESCRIPTION CODE

DESCRIPTION CODE

DESCRIPTION CODE

DESCRIPTION CODE

CLIPS AND SADDLES SUITED TO PRESSURE PIPEPIPE CLIPS - POLYPROPYLENE

PC PIPE CLIPS - POLYPROPYLENE

PIPE CLIPS - GALVANISED - NYLON COATED

GAVANISED SADDLES

WELDED NUT CLIPS - COATED - 10MM NUT

32MM40MM50MM80MM100MM150MM225MM250MM300MM375MM

1/2”3/4”1”1 1/4”1 1/2”2”3”

15MM20MM25MM32MM40MM50MM100MM

15MM - NYLON COATED20MM20MM - NYLON COATED25MM25MM - NYLON COATED32MM - NYLON COATED40MM40MM - NYLON COATED40MM - NYLON COATED - BROWN40MM - NYLON COATED - BLACK50MM50MM - NYLON COATED

20MM 25MM 32MM 40MM 50MM 65MM 80MM 100MM 150MM 225MM

100414132100414133100418947100414134100414122100414131100414135 262 0010 480 5795 480 5800

100414124100414123100414126100414127100414128100414129100414130

100414137100414138100414139100414140100402770100414141 480 5845

100414963100418938100414964100418939100414965100414966100418941100414968 4805941100414969100418942100414967

100414182100414185100414187100414189100414192100414195100414199100414175100414179100414184

ALL THREAD ROD

FIXINGS

10MM X 3M



100418459

100405381

100417187

DESCRIPTION

DESCRIPTION

CODE

CODE



PVC PRESSURE PIPE AND FITTINGSPVC PRESSURE PIPE AND FITTINGS

DESCRIPTION CODE

DESCRIPTION CODE

DESCRIPTION CODE

DESCRIPTION CODE

DESCRIPTION CODE

DESCRIPTION CODE

SOLVENT CEMENTS, PRIMERS AND CONSUMABLESPRESSURE SOLVENT CEMENTS - TYPE P

NON PRESSURE SOLVENT CEMENTS - TYPE N

PRIMING FLUIDS

LARGE BORE GAP FILLING SOLVENT CEMENTS

LARGE BORE PRIMING FLUID

CONSUMABLES

125ML - GREEN250ML - GREEN500ML - GREEN500ML - CLEAR1LT - GREEN4LT - GREEN4LT - CLEAR

125ML - BLUE250ML - BLUE250ML - CLEAR500ML - BLUE500ML - CLEAR1LT - BLUE4LT - BLUE4LT - CLEAR20LT - CLEAR

250ML - RED250ML - CLEAR500ML - RED500ML - CLEAR1LT - RED4LT - RED4LT - CLEAR

1LT - CLEAR*4LT - CLEAR*

1LT - PURPLE*

DUCT TAPE

10M X 12MM - TEFLON TAPE


PINK

300G SILICONE SEALANT

CLEAR NEUTRAL CURE


SILICONE - CHARCOAL

1LT 2 PART FERROPREE EPOXY

JOINING COMPOUND

500ML RRJ LUBRICANT

1LT RRJ LUBRICANT

100420291100420293100420295100420290100420292100420294100420280

100420283100420285100420288100420287100420289100420284100420286100420279100420258

100416981100416976100416983100416978100416980100416982100416977

100402018100402019

100416975

100422272

3081640

4805665

4805680

4805695

100406847

3300884

100411653

* Used on fittings 200mm and above.

* Used on fittings 200mm and above.

74

WATERMAIN PRESSURE PIPE AND FITTINGSWATERMAIN PRESSURE PIPE AND FITTINGS

PVC BLUE WATERMAIN PRESSURE PIPE - RRJ - 6M

90O BEND - FLANGE X FLANGE

90O BEND - SOCKET X FLANGE

TEES - SOCKET X SOCKET

11.25O BEND - SOCKET X SOCKET

22.5O BEND - SOCKET X SOCKET

45O BEND - SOCKET X SOCKET

90O BEND - SOCKET X SOCKET

PVC PRESSURE PIPE

CAST IRON WATER FITTINGS

100MM - PN16

100MM - PN18

100MM - PN20

150MM - PN16

150MM - PN18

150MM - PN20

200MM - PN12

200MM - PN16

200MM - PN18

200MM - PN20

100MM

150MM

200MM

100MM X 80MM + HYDRANT

100MM + WASHOUT

150MM

100MM

150MM

200MM

250MM

100MM

150MM

200MM

250MM

100MM

150MM

200MM

250MM

100MM

150MM

200MM

250MM

100MM X 100MM

150MM X 100MM

150MM X 150MM

200MM X 100MM

200MM X 150MM

200MM X 200MM

250MM X 100MM

250MM X 150MM

250MM X 200MM

250MM X 250MM

100414070

100414073

100414076

100414071

100414074

100414077

3273450

100414072

100414075

5300010

100399739

100399684

100399642

100407434

100399956

100399955

100399312

100399309

100399300

100399301

100399380

100399376

100399353

100399378

100399450

100399451

100399452

100399438

100399658

100399659

100399647

100399762

100423356

100422496

100423357

100422487

100423329

100423328

100423331

100423332

100423330

100423327

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE

75

WATERMAIN PRESSURE PIPE AND FITTINGS

TEES - FLANGE X FLANGE

HYDRANT TEES - SOCKET X FLANGE

CONNECTORS - SOCKET X FLANGE

SPRING HYDRANTS

SWASH HYDRANTS

BLANK FLANGES

READYTAP 4 WAY CONNECTORS

CAPS - SOCKET

TAPERS - SOCKET X SOCKET

HYDRANT RISERS - FLANGE X FLANGETEES - SOCKET X FLANGE

100MM X 100MM

150MM X 100MM

150MM X 150MM

100MM X 80MM

150MM X 80MM

200MM X 80MM

250MM X 80MM

100MM

150MM

200MM

250MM

80MM

100MM

80MM

100MM

80MM

100MM

150MM

100MM X 50MM - TAPPED

80MM X 50MM - TAPPED

100M X 20MM

150M X 20MM

100MM

150MM

200MM

250MM

150MM X 100MM

200MM X 100MM

200MM X 150MM

250MM X 100MM

250MM X 150MM

250MM X 200MM

80MM X 100MM

80MM X 150MM

80MM X 225MM

80MM X 300MM

80MM X 375MM

80MM X 450MM

100MM X 100MM

100MM X 150MM

100MM X 225MM

100MM X 300MM

100MM X 450MM

100MM X 600MM

100MM X 100MM

150MM X 100MM

200MM X 100MM

200MM X 150MM

250MM X 100MM

250MM X 150MM

250MM X 250MM

100422444

100422664

100422663

100422563

100422769

100422770

100422771

100403190

100403191

100403192

100403352

100420630

100420629

100421591

100421590

100407163

100407159

100407160

100407169

100407167

100403329

100403330

100401714

100401492

100401476

100401477

100422261

100417872

100417873

100423679

100417875

100417874

100418243

100418244

100418239

100418238

100418240

100418241

100418236

100418237

100407383

100407382

100418235

100418233

100423334

100423336

100423323

100423324

100423325

100422483

100422470

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION


CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE CODE


76

WATERMAIN PRESSURE PIPE AND FITTINGS

MULTIFIT GIBAULTS - SS BOLTS

TAPPING SADDLES

109MM - 127MM

159MM - 182MM

100MM X 25MM

100MM X 32MM

100MM X 40MM

100MM X 50MM

150MM X 25MM

150MM X 32MM

150MM X 40MM

150MM X 50MM

100404239

9172415

100422028

100422029

100421985

100422030

100422034

100422035

100422036

100422032

DESCRIPTION

DESCRIPTION

CODE

CODE


Please Note: 225mm, 300mm and 375mm diameter fittings are also available. Please contact your sales representative for pricing and availability.

R/S SLUICE VALVES - ANTI CLOCKWISE VALVES

100MM - SOCKETED

150MM - SOCKETED

100MM - FLANGED - TABLE D

150MM - FLANGED - TABLE D

100426327

100426328

100426310

100426312

DESCRIPTION CODE


INDUSTRIAL PIPING SYSTEMSINDUSTRIAL PIPING SYSTEMS

Schedule 80 grey PVC pipe and fittings have high impact strength and moderate heat tolerance making it suitable for a variety of applications including water treatment, manufacturing, food processing and commercial pool construction.

Corzan cPVC industrial piping systems offer superior resistance to corrosive chemicals, high temperatures and harsh application conditions making it the perfect choice for the process industry where highly corrosive chemicals are routinely used.

Corzan systems consistently achieve a higher level of performance than other metallic and non-metallic materials by providing a longer service life, lower maintenance costs and improved process utilisation.

Total Eden also offer offer a range of double containment systems for use where safety and environmental issues are a concern. The Ipex® Guardian™ system and Ipex® Clear Guard™ fail safe system are pre-tested and considered unmatched in the industry.

Where visual monitoring of fluid flow is required, clear rigid PVC pressure pipe provides a versatile option because it is non-contaminating, resists corrosion as well as bacterial and biological activity.

Total Eden is also a supplier of refrigeration pipe, industrial hose, camlocks and polypropylene fittings.

INDUSTRIAL PIPING SYSTEMS

• Schedule 80 Grey PVC Pressure Pipe and Fittings

• Corzan® CPVC Pipe and Fittings - Schedule 80

• Ipex® Double Containment Systems

• Clear PVC Pressure Pipe

• Refrigeration Pipe - SWJ

• Clips and Saddles

• Industrial Hose

• Polypropylene Camlocks

• Polypropylene Threaded Fittings Polypropylene Barbed Fittings

• Polypropylene Tank Outlets

• Pressure Solvent Cements, Primers and Consumables



SCH80 INDUSTRIAL GREY PVC PIPE AND FITTINGSuPVC PIPE - 5.8M LENGTHS

COUPLINGS

REDUCING COUPLINGS

MI COUPLINGS - NPT

FI COUPLINGS - NPT

45O ELBOWS

90O ELBOWS

1/2”3/4”1”1 1/4”1 1/2”2”2 1/2”3”4”6”8”10”12”

1/2”

3/4”

1”

1 1/4”

1 1/2”

2”

2 1/2”

3”

4”

6”

8”

10”

12”

3/4” X 1/2”

1” X 1/2”

1” X 3/4”

1 1/4” X 3/4”

1 1/4” X 1”

1 1/2” X 3/4”

1 1/2” X 1”

1 1/2” X 1 1/4”

2” X 1”

2” X 1 1/2”

2 1/2” X 1 1/2”

2 1/2” X 2”

3” X 1 1/2”

3” X 2”

3” X 2 1/2”

4” X 2”

4” X 2 1/2”

4” X 3”

6” X 4”

8” X 6”

1/2” X 1/2”3/4” X 3/4”1” X 1”1 1/4” X 1 1/4”1 1/2” X 1 1/2”2” X 2”2 1/2” X 2 1/2”3” X 3”4” X 4”

1/2” X 1/2”3/4” X 3/4”1” X 1”1 1/4” X 1 1/4”1 1/2” X 1 1/2”2” X 2”2 1/2” X 2 1/2”3” X 3”4” X 4”

1/2”3/4”1”1 1/4”1 1/2”2”2 1/2”3”4”6”8”10”12”

1/2”3/4”1”1 1/4”1 1/2”2”2 1/2”3”4”6”8”10”12”

100415096100415101100415099100415098100415097100415100100414877100415102100415103100415105100414881100414874 221 0020

100403904

100403911

100403909

100403907

100403906

100419711

100403910

100403912

100403913

100403903

100403914

100403905

100403908

100404086

100404080

100404081

100404079

100404078

100404077

100404076

100404075

100404085

100404084

100404082

100404083

100404087

100404089

100404088

100404091

100404090

100404092

100404093

100404094

100419751100419756100419754100419753100419752100419755100419749100398118100419750

100398007100398012100398009100419507100398008100398011100398010100398013100398014

100405774100405780100405777100405776100405775100405779100405778100405781100405782100405752100405753100405750100405751

100406057100406062100406060100406059100406058100406061100406010100406063100406064100406065100406012100406008100406009

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

CODE

CODE

CODE



SCH80 INDUSTRIAL GREY PVC PIPE AND FITTINGSFI ADAPTORS - NPT

MI ADAPTORS - NPT

TEES

REDUCING TEES

BARREL UNIONS - SWJ

REDUCING BUSHES

1/2” X 1/2”

3/4” X 3/4”

1” X 1”

1 1/4” X 1 1/4”

1 1/2” X 1 1/2”

2” X 2”

3”

4”

1/2” X 1/2”

3/4” X 3/4”

1” X 1”

1 1/4” X 1 1/4”

1 1/2” X 1 1/2”

2” X 2”

1/2”

3/4”

1”

1 1/4”

1 1/2”

2”

2 1/2”

3”

4”

6”

8”

10”

12”

3/4” X 1/2”

1” X 1/2”

1” X 3/4”

1 1/2” X 3/4”

1-1/2” X 1”

2” X 1/2”

2” X 3/4”

2” X 1”

2” X 1-1/2”

3” X 2”

4” X 2”

4” X 3”

6” X 3”

6” X 4”

1/2” - EPDM

1/2” - FKM

3/4” - EPDM

3/4” - FKM

1” - EPDM

1” - FKM

1 1/4” - EPDM

1 1/4” - FKM

1 1/2” - EPDM

1 1/2” - FKM

2” - EPDM

2” - FKM

3” - EPDM

3” - FKM

3/4” X 1/2”

1” X 1/2”

1” X 3/4”

1 1/4” X 1/2”

1 1/4” X 3/4”

1 1/4” X 1”

1 1/2” X 1/2”

1 1/2” X 3/4”

1 1/2” X 1”

1 1/2” X 1 1/4”

2” X 1/2”

2” X 3/4”

2” X 1”

2” X 1 1/4”

2” X 1 1/2”

2 1/2” X 1 1/4”

2 1/2” X 1 1/2”

2 1/2” X 2”

3” X 1”

3” X 1 1/2”

3” X 2”

3” X 2 1/2”

4” X 2”

4” X 2 1/2”

4” X 3”

6” X 2”

6” X 4”

8” X 6”

10” X 6”

10” X 8”

12” X 8”

12” X 10”

100398015

100398020

100398018

100398017

100398016

100398019

100398021

100398022

100398206

100398005

100398002

100398000

100397983

100398003

100423080

100423083

100423091

100423081

100423090

100423082

100423377

100423084

100423085

100423093

100423086

100423076

100423077

100423265

100423259

100423260

100423258

100423257

100423261

100423264

100423263

100423262

100423267

100423268

100423269

100423272

100423270

100398814

100398802

100398819

100398807

100398817

100398805

100398816

100398804

100398815

100398803

100398818

100398806

100398820

100398808

100400926

100400714

100400928

100400718

100400719

100400823

100400717

100400710

100400924

100400923

100400725

100400727

100400919

100400918

100400925

100400723

100400722

100400724

100400728

100400700

100400927

100400729

100400921

100400730

100400731

100400732

100400733

100400734

100400715

100400716

100400721

100400720

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

CODE

CODE



SCH80 INDUSTRIAL GREY PVC PIPE AND FITTINGSNIPPLE - BSP

TOE NIPPLE - BSP

ADAPTOR TAKE OFF SPIGOT MI - BSP - SCH40

ADAPTOR SPIGOT FI - BSP - SCH40

ADAPTOR SOCKET FI - BSP - SCH40

1/2” X 2”3/4” X 2”1” X 2”1 1/4” X 2”1 1/2” X 3 1/2”2” X 3 1/2”3” X 5”4” X 6”

1/2” X 2”3/4” X 2”1” X 3”1 1/4” X 3 1/2”1 1/2” X 3 1/2”2” X 3 1/2”3” X 5”4” X 6”

1/2” (SCH40)

3/4” (SCH40)

1” (SCH40)

1 1/2” (SCH40)

2” (SCH40)

1” (SCH40)

1 1/2” (SCH40)

2” (SCH40)

1” (SCH40)

1 1/2” (SCH40)

2” (SCH40)

100412947100412953100412951100412950100412949100412952100412955100412956

100413108100413113100413111100413110100413109100413112100413114100413115

100398146

100398149

100397979

100398147

100398148

100398124

100398123

100398125

100398113

100398111

100398115

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

CODE

45O WYE JUNCTION

EXPANSION JOINT - 6” TRAVEL - EPDM

90O CROSS

CAPS

1 1/2”

2”

3”

4”

6”

6” X 4”

1”

1 1/2”

2”

3”

4”

1/2”

3/4”

1”

1 1/4”

1 1/2”

2”

3”

4”

1/2”

3/4”

1”

1 1/4”

1 1/2”

2”

2 1/2”

3”

4”

6”

8”

100410851

100410853

100410854

100410855

100410856

100410857

100410871

100410870

100410872

100410873

100410874

100404335

100404340

100404338

100404337

100404336

100404339

100404341

100404342

100401759

100401764

100401761

100401691

100401760

100401763

100401762

100401765

100401766

100401767

100401693

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

ADAPTOR SOCKET MI - BSP - SCH40

1” (SCH40)

1 1/2” (SCH40)

2” (SCH40)

3” (SCH40)

4” (SCH40)

100398112

100398110

100398114

100398116

100398117

DESCRIPTION CODE



SCH80 INDUSTRIAL GREY PVC PIPE AND FITTINGSFLANGE GASKETS - ANSI 150

1/2” - EPDM

1/2” - VITON

3/4” - EPDM

3/4” - VITON

1” - EPDM

1” - VITON

1 1/4” - EPDM

1 1/4” - VITON

1 1/2” - EPDM

1 1/2” - VITON

2” - EPDM

2” - VITON

2 1/2” - EPDM

2 1/2” - VITON

3” - EPDM

3” - VITON

4” - EPDM

4” - VITON

6” - EPDM

6” - VITON

8” - EPDM

8” - VITON

100407303

100407314

100407309

100407320

100407306

100407317

100407305

100407316

100407304

100407315

100407308

100407319

100407307

100407318

100407310

100407321

100407311

100407322

100407312

100407323

100407313

100407324

DESCRIPTION CODE

Note: See flange tables on page 140 for technical specifications.

WELD-ON PRIMING FLUID FOR CPVC & PVC

473ML - P70

976ML - P70

100416984

100416985

DESCRIPTION CODE

WELD-ON CEMENT FOR PVC - SCH80

473ML - 711 GREY

976ML - 711 GREY

100420269

100420270

DESCRIPTION CODE

VAN STONE FLANGES - PVC - ANSI 150

BLIND FLANGES - PVC - ANSI

1/2”

3/4”

1”

1 1/4

1 1/2”

2”

2 1/2”

3”

4”

5”

6”

8”

8” SPIGOT

10”

12”

1/2”

3/4”

1”

1 1/4”

1 1/2”

2”

2 1/2”

3”

4”

6”

8”

100407555

100407560

100407558

100407557

100407556

100407559

100407544

100407545

100407546

100407547

100407548

100407539

100407554

100407542

100407543

100407198

100407204

100407201

100407200

100407199

100407203

100407202

100407205

100407206

100407183

100407184

DESCRIPTION

DESCRIPTION

CODE

CODE



CORZAN® CPVC INDUSTRIAL PIPING SYSTEMSCorzan cPVC industrial systems offer superior resistance to corrosive chemicals, high temperatures and abbrasive application conditions – a necessity in industries where harsh, highly corrosive chemicals are routinely used.

It's Corzan cPVC's perfect balance of qualities including excellent hydraulic capability, good abrasion resistance and lower thermal conductivity along with its chemical resistance that produce longer service life, lower maintenance costs and reduced downtime.

Ideal applications include:• Metal finishing• Pulp and paper• Water and waste treatment • Chemical processing • Semi-conductors • Chlorine / alkali industries

Corzan industrial systems have set new standards for performance in both pipe and fittings meeting a new cell classification (24448) as defined by ASTM D1784 standards. Proving it to have the highest impact resistance and heat distortion temperature (HDT) of any cPVC compound available. What's more, recent performance testing of Corzan cPVC fittings demonstrated a greater resistance to creep at elevated temperatures when compared to those manufactured from generic cPVC compounds.

No industrial system, metallic or non-metallic, performs better than one made from Corzan cPVC pipe and fittings. That's why Corzan cPVC is the system of choice for today's most discerning process engineers. To find out more please contact your Total Eden representative.



CORZAN CPVC PIPE AND FITTINGS - SCH 80PIPE - 5.8M LENGTHS

COUPLINGS

REDUCING COUPLINGS

FI COUPLINGS - NPT

MI COUPLINGS - NPT

45O ELBOWS

1/2”

3/4”

1”

1 1/4”

1 1/2”

2”

2 1/2”

3”

4”

6”

8”

10”

12”

1/2”

3/4”

1”

1 1/4”

1 1/2”

2”

2 1/2”

3”

4”

6”

8”

10”

12”

3/4” X 1/2”

1” X 1/2”

1” X 3/4”

1 1/4” X 3/4”

1 1/4” X 1”

1 1/2” X 1”

1 1/2” X 1 1/4”

2” X 1”

2” X 1 1/4”

2” X 1 1/2”

2 1/2” X 2”

3” X 2”

4” X 2”

4’ X 3”

6” X 4”

8” X 6”

1/2”

3/4”

1”

1 1/4”

1 1/2”

2”

2 1/2”

3”

4”

1/2”

3/4”

1”

1 1/4”

1 1/2”

2”

2 1/2”

3”

4”

1/2”

3/4”

1”

1 1/4”

1 1/2”

2”

2 1/2”

3”

4”

6”

8”

10”

12”

100414247

100414255

100414252

100414250

100414249

100414254

100414253

100414256

100414257

100414258

100414259

100414248

100414251

100403509

100403527

100403518

100403514

100403511

100403523

100403521

100403529

100403531

100403534

100403536

100403510

100403517

100403528

100403519

100403520

100403516

100403515

100403513

100403512

100403526

100403525

100403524

100403522

100403530

100403532

100403533

100403535

100403537

100397580

100397592

100397586

100397584

100397582

100397590

100397588

100397594

100397596

100397579

100397591

100397585

100397583

100397581

100397589

100397587

100397593

100397595

100405615

100405623

100405620

100405618

100405617

100405622

100405621

100405624

100405625

100405626

100405627

100405616

100405619

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

CODE

CODE



CORZAN CPVC PIPE AND FITTINGS - SCH 8090O ELBOWS

TEES

REDUCING TEES

THREADED PLUGS - NPT

CAPS

REDUCING BUSHES

1/2”

3/4”

1”

1 1/4”

1 1/2”

2”

2 1/2”

3”

4”

6”

8”

10”

12”

1/2”

3/4”

1”

1 1/4”

1 1/2”

2”

2 1/2”

3”

4”

6”

8”

10”

12”

3/4” X 1/2”

1” X 1/2”

1” X 3/4”

1 1/2” X 3/4”

1 1/2” X 1”

2” X 1”

2” X 1 1/2”

3” X 2”

4” X 2”

4” X 3”

6” X 4”

3/4”

1”

1 1/4”

1 1/2”

2”

2-1/2”

3”

4”

1/2”

3/4”

1”

1 1/4”

1 1/2”

2”

2 1/2”

3”

4”

6”

3/4” X 1/2”1” X 3/4”1” X 1/2”1 1/4” X 1/2”1 1/4” X 3/4”1 1/4” X 1”1 1/2” X 1/2” 1/2”1 1/2” X 3/41 1/2” X 1”1 1/2” X 1 1/4”2” X 1/2”2” X 3/4”2” X 1”2” X 1 1/4”2” X 1 1/2”2 1/2” X 1”2 1/2” X 1 1/2”2 1/2” X 2”3” 1 1/2”3” X 2”3” X 2 1/2”4” X 2”4” X 3”6” X 4”8” X 6”10” X 6”10” X 8”12” X 8”12” X 10”

100405830

100405838

100405835

100405833

100405832

100405837

100405836

100405839

100405840

100405841

100405842

100405831

100405834

100422518

100422532

100422525

100422524

100422521

100422529

100422528

100422534

100422536

100422539

100422541

100422520

100422519

100422533

100422526

100422527

100422523

100422522

100422531

100422530

100422535

100422537

100422538

100422540

100415630

100415627

100415626

100415625

100415629

100415628

100415631

100415632

100401482

100401488

100401485

100401484

100401483

100401487

100401486

100401489

100401490

100401491

100400529100400519100400518100400513100400515100400514100400509100400512100400511100400510100400524100400528100400527100400526100400525100400521100400520100400522100400530100400532100400531100400533100400534100400535100400536100400507100400508100400517100400516

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

CODE

CODE



CORZAN CPVC PIPE AND FITTINGS - SCH 80BLIND FLANGES VAN STONE FLANGES

WEBB BLIND FLANGES

BARREL UNIONS - FKM

FULL FACED FLANGES

1/2”

3/4”

1”

1 1/4”

1 1/2”

2”

2 1/2”

3”

4”

6”

8”

1/2”

3/4”

1”

1 1/4”

1 1/2”

2”

2 1/2”

3”

4”

6”

8”

2”

3”

4”

6”

1/2” - FKM

3/4” - FKM

1” - FKM

1 1/4” - FKM

1 1/2” - FKM

2” - FKM

2 1/2” - FKM

3” - FKM

4” - FKM

1/2”

3/4”

1”

1 1/4”

1 1/2”

2”

2 1/2”

3”

4”

6”

8”

100407176

100407181

100407179

100407178

100407177

1101620

100407180

1101640

1101650

1101660

100407182

100407517

100407524

100407521

100407520

100407519

100407523

100407522

100407525

100407526

100407527

100407528

100407220

100407221

100407222

100407223

100398760

100398766

100398763

100398762

100398761

100398765

100398764

100398767

100398768

100407265

100407271

100407268

100407267

100407266

100407270

100407269

100407272

100407273

100407274

100407275


DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE CODE

CODE

CODE

CODE

WELD-ON CEMENT FOR CPVC - SCH80


473ML - 724 - GREY -

CHEMICAL APPLICATION

976ML - 724 - GREY -


473ML - P70

976ML - P70

100420275

100420276

100416984

100416985

DESCRIPTION

DESCRIPTION

CODE

CODE




IPEX® DOUBLE CONTAINMENT SYSTEMSSafety and environmental issues such as groundwater contamination have long been serious concerns for industry. With the enormous cost of litigation and contaminant clean up, increasingly stringent corporate guidelines and legal regulations, the importance of fail-safe double containment systems becomes abundantly clear.

Total Eden offer a large range of double containment systems from Ipex, a leading North American supplier of thermoplastic piping systems. Ipex have been designing and fabricating double containment systems for over 25 years including;

• Guardian™ system. Made from PVC and Corzan® CPVC, these systems offer a complete selection of pre-tested modular components that are considered unmatched in the industry. Installed using its patented Centra-Lok™ design, Guardian reduces the number of joints in a system by as much as 60%.

• Clear Guard™ is a fail-safe, pressure rated clear containment system which allows for easy detection of leaks eliminating the risk associated with piping aggressive chemicals overhead. Clear-Guard utilises Guardian’s patented Centra lock fitting design.

Ipex double containment fittings are available in clear or “cost-saving” opaque.

These and many more configurations of double containment are available from Total Eden,for further information please contact your local Total Eden representative.



CLIPS AND SADDLES

REINFORCED SUCTION HOSE - PVC - GREY - PER M

COMMERCIAL WASHDOWN HOSE

CLEAR VINYL TUBE - PER M

INDUSTRIAL HOSE


12.5MM X 20M12.5MM X 100M20MM X 20M20MM X 100M25MM X 20M25MM X 100M

3MM [ID]

5MM [ID]

6MM [ID]

8MM [ID]

10MM [ID]

16MM [ID]

25MM [ID]

32MM [ID]

40MM [ID]

50MM [ID]

100409951100409952100409953100409954100409955100409956100409948100409950

100409992100409992100409993100409993100409994100409994

100424071

100424074

100424075

100424076

100424065

100424067

100424069

100424070

100424072

100424073

DESCRIPTION

DESCRIPTION

DESCRIPTION CODE

CODE

CODE

DESCRIPTION CODE

DESCRIPTION CODE

DESCRIPTION CODE

DESCRIPTION CODE

DESCRIPTION CODE

PIPE CLIPS - POLYPROPYLENE

PC PIPE CLIPS - POLYPROPYLENE

PIPE CLIPS - GALVANISED - NYLON COATED

GAVANISED SADDLES

WELDED NUT CLIPS - COATED - 10MM NUT

1 1/4”1 1/2”2”3”4”6”

1/2”3/4”1”1 1/4”1 1/2”2”3”

1/2”3/4”1”1 1/4”1 1/2”2”4”

1/2” - NYLON COATED3/4”3/4” - NYLON COATED1”1” - NYLON COATED1 1/4” - NYLON COATED1 1/2”1 1/2” - NYLON COATED1 1/2” - NYLON COATED - BROWN1 1/2” - NYLON COATED - BLACK2”2” - NYLON COATED

3/4”1”1 1/4”1 1/2”2”2 1/2”3”4”

100414132100414133100418947100414134100414122 262 0125

100414124100414123100414126100414127100414128100414129100414130

100414137100414138100414139100414140100402770100414141 480 5845

100414963100418938100414964100418939100414965100414966100418941100414968 4805935100414969100418942100414967

100414182100414185100414187100414189100414192100414195100414199100414175

ALL THREAD ROD AND FIXINGS

10MM X 3M THREADED ROD



100418459

100405381

100417187

DESCRIPTION CODE


INDUSTRIAL PIPING SYSTEMSCAMLOCKS



MALE X FEMALE BSP - TYPE A

FEMALE X MI BSP - TYPE B

FEMALE X HOSE BARB - TYPE C

FEMALE X FI BSP - TYPE D

MALE X HOSE BARB - TYPE E

MALE X MI BSP - TYPE F

MALE DUST PLUG - TYPE A

FEMALE DUST CAP - TYPE B

POLYPROPYLENE CAMLOCKS

3/4” X 3/4”

1” X 1”

1 1/4” X 1 1/4”

1 1/2” X 1 1/2”

2” X 2”

2” X FI NW50 THREAD

3” X 3”

3/4” X 3/4”

1” X 1”

1 1/4” X 1 1/4”

1 1/2” X 1 1/2”

2” X 2”

3” X 3”

3/4” X 3/4”

1” X 1”

1 1/4” X 1 1/4”

1 1/2” X 1 1/2”

2” X 2”

3” X 3”

3/4” X 3/4”

1”X 1”

1 1/4” X 1 1/4”

1 1/2” X 1 1/2”

2” X 2”

3” X 3”

3/4” X 3/4”

1” X 1”

1 1/4” X 1 1/4”

1 1/2” X 1 1/4”

1 1/2” X 1 1/2”

2” X 2”

3” X 3”

3/4” X 3/4”

1” X 1”

1 1/4” X 1 1/4”

1 1/2” X 1 1/2”

2” X 2”

3” X 3”

3/4”

1”

1 1/2”

2”

3”

3/4”

1”

1 1/4”

1 1/2”

2”

3”

100401194

100401195

100401196

100401197

100401198

100401055

100401199

100401165

100401166

100401167

100401168

100401169

100401170

100401117

100401118

100401119

100401120

100401121

100401122

100401135

100401136

100401137

100401138

100401139

100401140

100401176

100401177

100401178

3510762

100401179

100401180

100401181

100401230

100401231

100401232

100401233

100401234

100401235

100401104

100401105

100401107

100401108

100401109

100401082

100401083

100401084

100401085

100401086

100401087

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE



90O F+F ELBOWS

90O M+F ELBOWS

F+F COUPLINGS

F+F REDUCING COUPLINGS

M+F REDUCING COUPLINGS

REDUCING BUSHES

POLYPROPYLENE THREADED FITTINGS

1/2”

3/4”

1”

1 1/4”

1 1/2”

2”

2 1/2”

3”

4”

1/2”

3/4”

1”

1/2”

3/4”

1”

1 1/4”

1 1/2”

2”

2 1/2”

3”

4”

3/4” X 1/2”

1” X 3/4”

1 1/4” X 1”

1 1/2” X 1 1/4”

2” X 1 1/2”

2 1/2” X 2”

3” X 2”

3” X 2 1/2”

4” X 3”

3/4” X 1”

1” X 3/4”

3/4” X 1/2”

1” X 3/8”

1” X 1/2”

1” X 3/4”

1 1/4” X 1/2”

1 1/4” X 3/4”

1 1/4” X 1”

1 1/2” X 1/2”

1 1/2” X 3/4”

1 1/2” X 1”

1 1/2” X 1 1/4”

2” X 1/2”

2” X 3/4”

2” X 1”

2” X 1 1/4”

2” X 1 1/2”

2 1/2” X 1 1/2”

2 1/2” X 2”

3” X 1”

3” X 1 1/2”

3” X 2”

3” X 2 1/2”

4” X 2”

4” X 3”

100406416

100406417

100406418

100406419

100406420

100406421

100406389

100406390

100406388

100406422

100406423

100406424

3420000

100419622

100419623

100419624

100419625

100419626

100419627

100419628

100419708

100419649

7540197

100419651

100419654

100419658

100419661

100419662

100419663

100419660

100397791

100397948

100400647

100154665

100400650

100400648

100400653

100400651

100400652

100400657

100400654

100400655

100400656

100400662

100400658

100400659

100400660

100400661

100400664

100400665

100400666

100400670

100400667

100400668

100400640

100400642

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

CODE

CODE

CAPS

1/2”

3/4”

1”

1 1/4”

1 1/2”

2”

2 1/2”

3”

4”

100401627

100401628

100401629

100401630

100401631

100401632

100401636

100401635

100401634

DESCRIPTION CODE



HEX NIPPLES

REDUCING HEX NIPPLES

TEES

THREADED PLUGS

FI BARREL UNION - VITON SEAL

FI FULL FACED FLANGES - UNDRILLED

POLYPROPYLENE THREADED FITTINGS

1/2”

3/4”

1”

1 1/4”

1 1/2”

2”

2 1/2”

3”

4”

3/4” X 1/2”

1” X 1/2”

1” X 3/4”

1 1/4” X 1”

1 1/2” X 1”

1 1/2” X 1 1/4”

2” X 1 1/2”

2 1/2” X 2”

3” X 2”

3” X 2 1/2”

4” X 3”

1/2”

3/4”

1”

1 1/4”

1 1/2”

2”

2 1/2”

3”

4”

1/2”

3/4”

1”

1 1/4”

1 1/2”

2”

2 1/2”

3”

4”

1/2”

3/4”

1”

1 1/4”

1 1/2”

2”

1/2”

3/4”

1”

1 1/4”

1 1/2”

2”

3”

4”

100412932

100412933

100412935

100412936

100412938

100412939

100412941

100412943

100412930

100413051

100413054

100413052

100413056

100413059

100413060

100413065

100413071

100413068

100413069

100413049

100422967

100422968

100422969

100422970

100422971

100422972

100422975

100422976

100422974

100415578

100415579

100415580

100415581

100415582

100415583

100415586

100415587

100415585

100398779

100398780

100398781

100398782

100398783

451 0435

100407419

100407420

100407421

100407506

100407507

100407508

100407509

100407505

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

CODE

CODE



MI END CONNECTORS

TEES

FI TEES

ELBOWS

JOINERS

MI THREAD - ELBOWS

POLYPROPYLENE BARBED FITTINGS

1/2”

3/4”

1”

1 1/4”

1 1/2”

2”

3”

1/2”

3/4”

1”

1 1/4”

1 1/2”

2”

1 1/4

1 1/2

1/2”

3/4”

1”

1 1/4”

1 1/2”

2”

1/2”

3/4”

1”

1 1/4”

1 1/2”

2”

3”

1/2”

3/4”

1”

1 1/4”

1 1/2”

2”

100405058

100405059

100405060

100405065

100405070

100405073

100405076

100422955

100422956

100422958

100422960

100422962

100422964

480 9555

100422965

100406403

100406404

100406406

100406408

100406410

100406412

100410970

100410971

100410972

100410973

100410974

100410975

455 9710

100406402

100406405

100406407

100406409

100406411

100406413

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION CODE

CODE

CODE

CODE

CODE

CODE



M+F POLYPROPYLENE THREADED TANK OUTLETS

CORRUGATED GASKET KIT - SUITS PP TANK OUTLETS

DRUM OUTLET THREADED ADAPTORS

FLAT GASKETS - SUIT PP TANK OUTLETS - EPDM

MULTI SEAL TANK OUTLETS

TANK OUTLETS

1/2”

3/4”

1”

1 1/4”

1 1/2”

2”

11/2” - 1”

1 1/4” - 2”

FI BUTTRESSS TO 2” FI BSP

MI BUTTRESSS TO 2” FI BSP

1/2”

1”

1 1/4”

1 1/2”

2”

15MM - ALCRYN - SUITS 21MM OD PRESSURE PIPE20MM - ALCRYN - SUITS 27MM OD PRESSURE PIPE25MM - ALCRYN - SUITS 33MM OD PRESSURE PIPE32MM - ALCRYN - SUITS 42MM OD PRESSURE PIPE40MM - ALCRYN - SUITS 48MM OD PRESSURE PIPE50MM - EPDM - SUITS 56MM OD DWV PIPE50MM - ALCRYN - SUITS 60MM OD PRESSURE PIPE80MM - ALCRYN - SUITS 89MM OD PRESSURE PIPE100MM - EPDM - SUITS 110MM OD DWV PIPE100MM - ALCRYN - SUITS 114MM OD PRESSURE PIPE150MM - ALCRYN - SUITS 160MM OD PRESSURE PIPE

100413838

100413839

100413840

100413841

100413842

100413843

100409251

100409250

100397914

100397786

100409178

100409180

100409181

100409177

100409182

100419913 100419914 100419915 100419916 100419917 100419921 100419918 100419919 100419920 100419911 100419912

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION CODE

CODE

CODE

CODE

CODE

SCH40 CLEAR PVC PRESSURE PIPE - 3M LENGTHS REFRIGERATION PIPE SWJ - 4M LENGTHS

CLEAR RIGID AND REFRIGERATION PIPE

15MM*20MM*25MM*32MM*40MM*50MM*80MM*100MM*155MM^195MM^

15MM*

20MM*

25MM*

100414204100414206100414207100414208100414209100414210100414211100414202100414203100414205

100414890

100414891

100414892

DESCRIPTION DESCRIPTION CODE CODE

* Bundles of 20 Lengths. Bundles are plastic wrapped to keep pipe clean.

For compatible fittings with refrigeration pipe see the AS1477 BUTT-HEAD range on pages 66.

* Suits AS1477 BUTT-HEAD PVC fittings - See pages 66.

^ Suits US standard PVC imperial fittings - See Sch80 fittings on on pages 68.




PRESSURE SOLVENT CEMENTS AND PRIMERSWELD-ON CEMENT FOR PVC - SCH80

WELD-ON CEMENT FOR CPVC - SCH80


SOLVENT CEMENTS - TYPE P

PRIMING FLUIDS

LARGE BORE GAP FILLING SOLVENT CEMENTS

LARGE BORE PRIMING FLUID

CONSUMABLES

473ML - 711 GREY

976ML - 711 GREY

473ML - 724 - GREY -


976ML - 724 - GREY -


473ML - P70

976ML - P70

125ML - GREEN

250ML - GREEN

500ML - GREEN

500ML - CLEAR

1LT - GREEN

4LT - GREEN

4LT - CLEAR

250ML - RED

250ML - CLEAR

500ML - RED

500ML - CLEAR

1LT - RED

4LT - RED

4LT - CLEAR

1LT - CLEAR*

4LT - CLEAR*

1LT - PURPLE*

DUCT TAPE


10M X 12MM - TEFLON TAPE,

PINK


CLEAR NEUTRAL CURE


SILICONE - CHARCOAL

1LT 2 PART FERROPREE EPOXY

JOINING COMPOUND

500ML RRJ LUBRICANT

1LT RRJ LUBRICANT

100420269

100420270

100420275

100420276

100416984

100416985

100420291

100420293

100420295

100420290

100420292

100420294

100420280

100416981

100416976

100416983

100416978

100416980

100416982

100416977

100402018

100402019

100416975

100422272

3081640

4805665

4805680

4805695

100406847

3300884

100411653

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE

* Must be used on fittings 200mm or larger.

* Must be used on fittings 200mm or larger.


VALVESVALVES

3PLUMBING CATALOGUETELEPHONE 1300 65 40 40

VALVES

• Compact Ball Valves

• Union Ball Valves

• Butterfly Valves

• Sliding Gate Valves

• Ball Check Valves

• Swing Check Valves

• Rotary Valves

• FIP Valves

Total Eden has considerable expertise in the supply of water management solutions for our customers, and valves play an important part in the management and control of water flow, water pressure and water quality in piping systems. We supply specialised commercial and industrial strength plastic and metal valves for a variety of applications. Whether it's commercial or domestic pool construction, water treatment plants, irrigation or a range of applications within the chemical industry, we have a valve to suit the application.

Our extensive valve range comes from some of the leading domestic and international valve manufacturers ensuring peace of mind well beyond installation.

Compact Ball Valves: For pool, spa, irrigation, commercial and industrial applications.Available in diameters from 15mm to 50mm in SWJ and ½” to 4” in FI thread.

Union Ball Valves: PVC and polypropylene valves for commercial and industrial applications. Available in diameters ranging from ½” to 6”. EPDM or viton seals.

Butterfly Valves: PVC and cast iron valves for commercial and industrial applications.Available in diameters ranging from 50mm to 300mm. Gear operated or lever type.

Sliding Gate Valves: PVC valves for both non-pressure or pressure applications. Available in diameters ranging from 40mm to 150mm. PVC valve body, santoprene seals and corrosion resistant shaft.

Ball Check Valves: Suitable for commercial and industrial applications. PVC or polypropylene body in diameters from ½” to 6”. EPDM or viton seat.

Swing Check Valves: Suitable for commercial and industrial applications. PVC body in diameters ranging from 25mm to 100mm.

Rotary Valves: 2-way and 3-way full bore rotary valves, ideal for pool and spa applications.


VALVES

PLASTIC VALVESSH COMPACT BALL VALVES - PVC - SWJ SH KTN BALL VALVES - PVC - FI THREAD

SH BUTTERFLY VALVE - PVC - LEVER TYPESH COMPACT BALL VALVES - PVC - FI THREAD

SAFTEY BLOCK TRUE UNION BALL VALVES - PVC - FI THD

SH SAFTEY BLOCK TRUE UNION BALL VALVES - PVC - SWJ

15MM

20MM

25MM

32MM

40MM

50MM

1/2”

3/4”

1”

1 1/4”

1 1/2”

2”

50MM - TABLE D

80MM - TABLE D

100MM - TABLE D

150MM - TABLE D

200MM - TABLE D

1/2”

3/4”

1”

1 1/4”

1 1/2”

2”

3”

4”

1/2”

3/4”

1”

1 1/4”

1 1/2”

2”

3”

4”

1/2”

3/4”

1”

1 1/4”

1 1/2”

2”

3”

4”

100425445

100425446

100425447

100425448

100425450

100425449

100425435

100425436

100425437

100425438

100425439

100425440

100424907

100424908

100424905

100424906

100424910

100425427

100425428

100425429

100425430

100425431

100425432

100425271

100425270

100426291

100426292

100426293

100426294

100426295

100426296

100426297

100426306

100426299

100426300

100426301

100426302

100426303

100426304

100426305

100426298



DESCRIPTION

DESCRIPTION

CODE CODE

CODE CODE

CODE

CODE

Construction: Body - uPVC, Seat - Teflon, Seal - EPDM.

Construction: Body - uPVC, Seat - Teflon, Seal - EPDM.

Construction: Stem - uPVC, Ball - uPVC, Body - uPVC, Seat - EPDM, Stem “O” Ring - EPDM, Cap - ABS, Handle - ABS.

Construction: Body - uPVC, Seat - EPDM, Stem “O” Ring - EPDM, Cap - ABS, Handle - ABS.

Construction: Body - uPVC, Seat - EPDM, Stem “O” Ring - EPDM, Cap - ABS, Handle - ABS.

Construction: Stem - uPVC, Ball - uPVC, Body - uPVC, Seat - EPDM, Stem “O” Ring - EPDM, Cap - ABS, Handle - ABS. SH BUTTERFLY VALVE - PVC - GEARED

WAFER CHECK VALVES - PVC

200MM - TABLE E

250MM - TABLE E

300MM - TABLE E

50MM

80MM

100MM

150MM

200MM

250MM

315MM

100425016

100425017

100425018

5250070

100426477

4811115

100426478

5250120

100425699

5250170

DESCRIPTION

DESCRIPTION

CODE

CODE

Construction: Body - uPVC, Disc - PP, Seat - EPDM.

Construction: Body - uPVC, Seat - EPDM.

SH BALL CHECK VALVES - PP

3” - FLANGED - TABLE D

4” - FLANGED - TABLE D

4811180

4811185

DESCRIPTION CODE

Construction: Body - PP, Seat - Viton.


VALVES

SLIDING GATE VALVES - SWJ - SANTOPRENE SEAL

40MM - PVC - MAX 45 PSI40MM - ABS - 3 PIECE50MM - PVC - MAX 40 PSI50MM - PVC - 3 PIECE80MM - PVC - MAX 30 PSI80MM - ABS - SPIGOT X SPIGOT - BLACK90MM - PVC - MAX 20 PSI - SUITS 90MM SW90MM - PNEUMATIC - PLASTIC PADDLE90MM - PNEUMATIC - S/S PADDLE100MM - PVC - MAX 20 PSI100MM - PNEUMATIC - DWV110MM - PVC - MAX 15 PSI - SUITS 100MM DWV150MM - PVC - MAX 15 PSI160MM - PNEUMATIC - S/S PADDLEPVC HANDLE TO SUIT 40MM - 50MMØMETAL HANDLE TO SUIT 40MM - 110MMØ90MM SEAL4” SEAL SUITS 100MM & 110MM6” & 8” SEAL

100426124100426128100426125100426126100426127 100426130 100426118 4576536 4576537100426119 4576538 100426123100426129 4576539 100409623 100409621100419834 6162808 6162810

DESCRIPTION CODE

PLASTIC VALVES

SH BALL CHECK VALVES - PVC - FLANGED

SH BALL CHECK VALVES - PP - FI THREAD

TOP INSPECTION SWING CHECK VALVES - PVC

FOOT VALVES - POLY

TRUE UNION CHECK VALVES - PVC - SWJ

FULL BORE ROTORY VALVES - PVC

SWING CHECK VALVES - PVC - SWJ

SH BALL CHECK VALVES - PVC - FI THREAD

4”- TABLE D

6” - TABLE D

1/2”

3/4”

1”

1 1/4”

1 1/2”

2”

40MM - FULL FLOW

40MM FULL FLOW AIR - SOFT

SPRING

50MM - FULL FLOW

3”

4”

6”

8”

10”

12”

40MM

40MM - CLEAR BODY

50MM

40MM 2-WAY

50MM 2-WAY

40MM 3-WAY

50MM 3-WAY

25MM

32MM

40MM

40MM - CLEAR BODY

50MM

80MM

100MM

1/2”

3/4”

1”

1 1/4”

1 1/2”

2”

3”

4”

5250090

4811135

100425258

100425259

4811162

100425260

100425261

4811175

100425663

100425690

100425664

5250180

100426080

5250200

4609350

9983406

4609351

100425696

100425697

100425698

100424837

100424838

100424846

100424847

100425685

100425695

100425687

100425694

100425688

100425689

100425684

100425265

100425266

4811025

100425267

100425268

100425263

100425264

100425262

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE


Construction: Body - PP, Seat - Viton.

Ideal for Pools & Spas



VALVES

Established in 1954 FIP is Europe’s largest manufacturer of thermoplastic valves for pressure application pipelines. With over 50 years of design and manufacturing experience FIP manufactures lightweight, long life, low maintenance valves that will save you time and money. FIP compounds, most of which are engineered and developed within the FIP factory, are reliable, durable and resistant to corrosion. Utilising materials such as; UPVC, Corzan® C-PVC, PP, PVDF, ABS, FIP have a valve to suit various chemical resistance and temperature resistance requirements.

®FIP VALVES

FIP Valves are ideal for the following applications;

• Pulp and paper manufacturing

• Water and waste treatment

• De-ionised water lines

• Chemical processing

• Industrial processing

• Chlorine / alkali industries

• Hot corrosive fluids

• Swimming pools

Total Eden supplies a full range of FIP valves in both manual and actuated options.

For further information please contact your Total Eden representative.


VALVES

FIP PLASTIC VALVESBALL VALVE - VKD - PVC EPDM - SWJ

BALL VALVE - VKD - CPVC FPM - SWJ

BALL VALVE - VKD - PVC EPDM - BSP

BALL VALVE - VEE - PVC EPDM - SWJ

BALL VALVE - VEE - PVC EPDM - BSP

3 WAY BALL VALVE - L PORT - TKD - PVC EPDM - SWJ

3 WAY BALL VALVE - L PORT - TKD - CPVC FPM - SWJ

3 WAY BALL VALVE - T PORT - TKD - PVC EPDM - SWJ

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

2-1/2”

3”

4”

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

2-1/2”

3”

4”

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

100425355

100425361

100425358

100425357

100425356

100425360

100425359

100425362

100425363

100425332

1200925

1200930

100425334

100425333

100425336

100425335

100425337

100425338

100425349

100425354

100425352

100425351

100425350

100425353

100425298

100425303

100425301

100425300

100425299

100425302

100425290

100425296

100425293

100425292

100425291

100425295

100425098

100425099

100425096

100425134

100425133

100425097

100425086

100425087

100425084

100425126

100425125

100425085

100425102

100425103

100425100

100425136

100425135

100425101

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE

Construction:Body- PVC-U, Seal- EPDM, Seat- PTFENote: Locking device sold seperately.

Construction:Body- PVC-C, Seal- FPM, Seat- PTFENote: Locking device sold seperately.


Construction:Body- PVC-U, Seal- EPDM, Seat- PE

Construction:Body- PVC-U, Seal- EPDM, Seat- PE


Construction:Body- PVC-C, Seal- FPM, Seat- PTFENote: Locking device sold seperately.



VALVES

FIP PLASTIC VALVES3 WAY BALL VALVE - T PORT - TKD - CPVC FPM - SWJ

DIAPHRAGM VALVE - VM - CPVC FPM FPM - SWJ

DIAPHRAGM VALVE - VM - PVC EPDM - SWJ

DIAPHRAGM VALVE - VM - PVC FPM - SWJ

DIAPHRAGM VALVE - VM - PVC PTFE - SWJ

ANGLE SEAT VALVE - VV - PVC EPDM/PE - SWJ

BUTTERFLY VALVE - FE WAFER - PVC EPDM

BUTTERFLY VALVE - FE - PVC EPDM - WITH GEAR BOX

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

1-1/2”

2”

2-1/2”

3”

4”

6”

8”

10” (Table D/E)

12” (Table D/E)

100425090

100425091

100425088

100425128

100425127

100425089

100425781

100425786

100425784

100425783

100425782

100425785

100425811

100425816

100425814

100425813

100425812

100425815

100425841

100425846

100425844

100425843

100425842

100425845

100425871

100425874

100425872

1201325

1201330

100425873

100425899

100425904

100425902

100425901

100425900

100425903

100424884

100424889

100424887

100424886

100424885

100424888

100425012

100424916

100424915

100424917

100424918

100424920

100424921

100424922

100424923

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE

Construction:Body - PVC-C, Seal - FPM, Seat - PTFENote: Locking device sold seperately.

Construction: Body - PVC-C Diaphragm - FPM, O Ring - FPM

Construction: Body - PVC-U, Diaphragm - EPDM, O Ring - EPDM

Construction: Body - PVC-U, Diaphragm - FPM, O Ring - FPM

Construction: Body - PVC-U, Diaphragm - PTFE

Construction: Body - PVC-U, Seals - EPDM/PE

Construction: Body- PVC-U, Disc- PVC-U, Stem -Zinc Plated Steel Seal-EPDM

Construction: Body- PVC-U, Disc- PVC-U, Stem -Zinc Plated Steel, Seal-EPDM


VALVES

FIP PLASTIC VALVESANGLE SEAT CHECK VALVE - PVC EPDM - BSP

BALL CHECK VALVE - SXE - PVC EPDM - SWJ

BALL CHECK VALVE - SXE - PVC EPDM - BSP

BALL CHECK VALVE - SXE - CPVC FPM - SWJ

BUTTERFLY VALVE - FK - PVC EPDM - TABLE D/E

BUTTERFLY VALVE - FK - CPVC FPM - LUGGED ANSI

BUTTERFLY VALVE - FK - CPVC FPM - TABLE D/E

BUTTERFLY VALVE - FK - PVC EPDM - WITH GEAR BOX

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

2-1/2”- TO SUIT SWJ

3”

4”

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

1-1/2”

2”

2-1/2”

3”

4”

5”

6”

8”

2-1/2”

3”

4”

5”

6”

8”

10”

12”

2-1/2”

3”

4”

5”

6”

8”

10”

12”

10” (Table D/E)

12” (Table D/E)

100425529

100425534

100425532

100425531

100425530

100425533

100425537

100425535

100425536

100425220

100425223

100425221

100425243

100425242

100425222

100425216

100425219

100425217

100425241

100425240

100425218

100425209

1200775

100425210

100425237

100425236

100425211

100424966

100424968

100424967

100424969

100424973

100424970

100424971

100424972

100424940

100424941

100424942

100424943

100424944

100424945

100424938

100424939

100424946

100424947

100424948

100424949

100424950

100424951

100424952

100424953

100424974

100424975

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE

Construction: Body - PVC-U, Seal - EPDM

Construction: Body - PVC-U, Seals - EPDM

Construction: Body - PVC-U, Seal - EPDM

Construction: Body - PVC-C, Seal - FPM

Construction: Body - PP-GR, Disc- PVC-U, Stem-Stainless Steel, Seal-EPDM

Construction: Body - PP-GR, Disc- PVC-C, Stem-Stainless Steel, Seal-FPM

Construction: Body - PP-GR, Disc- PVC-C, Stem-Stainless Steel, Seal-FPM

Construction: Body - PP-GR, Disc- PVC-U, Stem-Stainless Steel, Seal-EPDM


VALVES

FIP PLASTIC VALVESSWING CHECK VALVE WAFER - CR - PVC

END CONNECTORS - FIP VALVE SPARE PARTS

SCREENS TO SUIT SEDAMENT STRAINERS - PVC & PP

SEDIMENT STRAINER - RV - CLEAR - SWJ - 35 MESH

SEDIMENT STRAINER - RV - CPVC - SWJ - 30 MESH

2”

2-1/2”

3”

4”

5”

6”

8”

10”

12”

1/2” PVC BSP - RV, VKD, TKD, VV, SV3/4” PVC BSP - RV, VKD, TKD, VV, SV1” PVC BSP - RV, VKD, TKD, VV, SV1-1/4” PVC BSP - RV, VKD, TKD, VV, SV1-1/2” PVC BSP - RV, VKD, TKD, VV, SV2” PVC BSP - RV, VKD, TKD, VV, SV2-1/2” PVC BSP - RV, VKD, TKD, VV, SV 3” PVC BSP - SUITS VKD4” PVC BSP - SUITS VKD 1/2” PVC NPT - SUITS VKD, TKD, VV, SV3/4” PVC NPT - SUITS VKD, TKD, VV, SV1” PVC NPT - SUITS VKD, TKD, VV, SV1-1/4” PVC NPT - SUITS VKD, TKD, VV, SV1-1/2” PVC NPT - SUITS VKD, TKD, VV, SV2” PVC NPT - SUITS VKD, TKD, VV, SV 1/2” PVC BSP - CM, VM, MK, DM, FS, FC3/4” PVC BSP - CM, VM, MK, DM, FS, FC1” PVC BSP - CM, VM, MK, DM, FS, FC1-1/4” PVC BSP - CM, VM, MK, DM, FS, FC1-1/2” PVC BSP - CM, VM, MK, DM, FS, FC2” PVC BSP - CM, VM, MK, DM, FS, FC 1/2” PVC NPT - CM, VM, MK, DM, FS, FC3/4” PVC NPT - CM, VM, MK, DM, FS, FC1” PVC NPT - CM, VM, MK, DM, FS, FC1-1/4” PVC NPT - CM, VM, MK, DM, FS, FC1-1/2” PVC NPT - CM, VM, MK, DM, FS, FC2” PVC NPT - CM, VM, MK, DM, FS, FC 1/2” CPVC NPT - VKD, TKD, VXE, SXE, RV3/4” CPVC NPT - VKD, TKD, VXE, SXE, RV1” CPVC NPT - VKD, TKD, VXE, SXE, RV1-1/4” CPVC NPT - VKD, TKD, VXE, SXE, RV1-1/2” CPVC NPT - VKD, TKD, VXE, SXE, RV2” CPVC NPT - VKD, TKD, VXE, SXE, RV

18 MESH - PVC TO SUIT 1/2” RV

18 MESH - PVC TO SUIT 3/4” RV

18 MESH - PVC TO SUIT 1” RV

18 MESH - PVC TO SUIT 1-1/4” RV

18 MESH - PVC TO SUIT 1-1/2” RV

18 MESH - PVC TO SUIT 2” RV

30 MESH - PP TO SUIT 1/2” RV

30 MESH - PP TO SUIT 3/4” RV

30 MESH - PP TO SUIT 1” RV

30 MESH - PP TO SUIT 1-1/4” RV

30 MESH - PP TO SUIT 1-1/2” RV

30 MESH - PP TO SUIT 2” RV

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

100425676

100425675

100425677

100425678

100425679

100425680

100425681

100425673

100425674

100403231100403236100403234100403233100403232100403235100403220

100403209100403210

100403211100403216100403214100403213100403212100403215

100403207100403225100403223100403222100403221100403224

100403208100403230100403228100403227100403226100403229

100403201100403206100403204100403203100403202100403205

100418710

100418715

100418713

100418712

100418711

100418714

100418704

100418709

100418707

100418706

100418705

100418708

100421187

100421188

100421178

100421190

100421189

100421179

100421180

100421185

100421183

100421182

100421181

100421184

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

CODE

Construction:Body - PVC-U, Seal - EPDM

Construction:Body - PVC-U, Seal - EPDM

Construction:Body - PVC-C, Seal - FPM

SCREENS TO SUIT SEDAMENT STRAINERS - CONT.

O RING KITS - EPDM AND FPM

35 MESH - PVC TO SUIT 1/2” RV35 MESH - PVC TO SUIT 3/4” RV35 MESH - PVC TO SUIT 1” RV35 MESH - PVC TO SUIT 1-1/4” RV35 MESH - PVC TO SUIT 1-1/2” RV35 MESH - PVC TO SUIT 2” RV

1/2” EPDM - SUITS VKD3/4” EPDM - SUITS VKD1” EPDM - SUITS VKD1-1/4” EPDM - SUITS VKD1-1/2” EPDM - SUITS VKD2” EPDM - SUITS VKD 1/2” FPM - SUITS VKD3/4” FPM - SUITS VKD1” FPM - SUITS VKD1-1/4” FPM - SUITS VKD1-1/2” FPM - SUITS VKD2” FPM - SUITS VKD

100418716100418721100418719100418718100418717100418720

100413693100413691100413690100413689100413692100413694 100413699100413697100413696100413695100413698

DESCRIPTION

DESCRIPTION

CODE

CODE


VALVES

METAL VALVESBALL VALVES - BRASS

GATE VALVES - TESTED - BRASS

FOOT VALVES - FLANGED GAVLANISED

GATE VALVES - UNTESTED - BRASS

WSSE WAFER BUTTERFLY VALVES - CAST IRON - 1400KPA

WSSE LUGGED BUTTERFLY VALVES - CAST IRON - 1400KPA

SPRING CHECK VALVES - BSP - BRASS

WAFER CHECK VALVES - CAST IRON / STAINLESS STEEL

RUBBER VIBRATION / EXPANSION JOINTS - FLANGED

1/2”

3/4”

1”

1 1/4”

1 1/2”

2”

1”

3/4”

1 1/2”

2”

3”

80MM

100MM

150MM

250MM

1/2”

3/4”

1”

1 1/4”

1 1/2”

2”

3”

4”

50MM - LEVER

65MM - LEVER

80MM - LEVER

100MM - LEVER

125MM - LEVER

150MM - LEVER

200MM - LEVER

250MM - LEVER

300MM - LEVER

100MM - LEVER

150MM - LEVER

200MM - LEVER

250MM - LEVER

1/2”

3/4”

1”

1 1/4”

1 1/2”

2”

2 1/2”

3”

4”

50MM

65MM

80MM

100MM

125MM

150MM

200MM

250MM

300MM

1 1/4” - TABLE D/E

1 1/2” - TABLE D/E

2” - TABLE D/E

2 1/2” - TABLE D/E

3” - TABLE D/E

4” - TABLE D/E

5” - TABLE D/E

6” - TABLE D/E

8” - TABLE D/E

10” - TABLE D/E

12” - TABLE D/E

100425188

100425189

100425190

100425191

100425192

100425193

100426092

100426091

100426094

100426095

100426096

100426078

100426072

100426074

100426076

100426098

100426111

100426099

100426100

100426101

100426102

100426104

100426097

100425046

100425047

100425048

100425042

4578250

100425043

4578260

100425045

4578270

100425024

100425027

100425025

100287063

100426418

100426419

100426420

100426421

100426422

100426423

100426424

100426425

100426416

100426476

100425703

100425563

100425700

5250260

100425560

100425561

100425701

5250270

452 8465

452 8470

480 9205

457 5030

480 9215

480 9220

457 5045

457 5050

480 9235

480 9240

457 5065

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE

Features: Dimensions to BS 5155 - Lever and gear operation. Construction: Epoxy coated cast iron body, Seat - EPDM,

Disc - SS, Stem - SS,

Features: Dimensions to BS 5155 - Lever and gear operation.

Construction: Body - Epoxy coated cast iron, Seat - EPDM, Disc - SS, Stem - SS.


POLY PRESSURE PIPE AND FITTINGSPOLY PRESSURE PIPE AND FITTINGS

Polyethylene pipe for pressure applications is available in diameters from 16mm to 2000mm with a range of identification colours (yellow, blue and lilac) co-extruded as stripes to allow the service application to be readily identified. Polyethylene pipe is an extremely flexible material that features high impact strength, chemical and corrosion resistance and provides many installation advantages over other materials.

Available in straight lengths and coils polyethylene pipe is complemented by Plasson and Fusion electrofusion and Plasson compression fittings.

Electrofusion fittings use heat welding provided by an electrical current, the material melts progressively and causes the pipe surface to melt and fuse with the fitting. Once cooled, a perfect cohesion of the fitting and pipe joint is achieved. A major advantage of electrofusion fittings is ability to carry a full axil load without the need for external clamping or anchoring.

Polyethylene piping systems using electrofusion fittings are the ideal solution for general water supply, sewerage, wastewater, gas distribution, slurry lines and submerged pipelines in industrial, chemical or mining applications.

PE100 buttweld pressure fittings produce a solid joint with the pipe giving end users confidence in the longevity of the piping system because joints will not decay over time. Total Eden can supply buttweld fittings from 25mm to 1200mm in diameter.

Compression fittings are an easy connection system for water supply and compressed air applications; tapping saddles are also available to suit metric polyethylene pipe.

POLY PRESSURE PIPE AND FITTINGS

• Polyethylene Pressure Pipe

• Polyethylene Gas Pipe

• Plasson® Polyethylene Electrofusion Fittings

• Plasson® Metric Compression Fittings

• Tapping Saddles - Mechanical

• Imperial/Rural Polyethylene Pipe and Fittings

• Polyethylene Buttweld Fittings

• Pipe Clips



POLYETHYLENE PIPE - 25 METRE COILS






POLYETHYLENE PRESSURE PIPE - COILS

20MM - PN12.5

25MM - PN12.5

32MM - PN12.5

16MM - PN12.5

20MM - PN12.5

20MM - PN16

25MM - PN12.5

25MM - PN12.5 - LILAC

25MM - PN16

32MM - PN12.5


32MM - PN16

40MM - PN12.5

40MM - PN16

40MM - PN16 - LILAC

50MM - PN12.5


50MM - PN16

50MM - PN16 - LILAC

63MM - PN12.5

63MM - PN16

25MM - PN16

32MM - PN12.5

32MM - PN16

40MM - PN16

50MM - PN16

63MM - PN8

63MM - PN12.5

63MM - PN16


75MM - PN10

75MM - PN12.5

75MM - PN16

90MM - PN8

90MM - PN10

90MM - PN12.5


110MM - PN10

110MM - PN12.5

110MM - PN16


40MM - PN8

40MM - PN10

40MM - PN12.5

40MM - PN16

50MM - PN8

50MM - PN12.5


50MM - PN16

16MM - PN12.5

16MM - PN16

20MM - PN12.5

20MM - PN16

25MM - PN12.5

25MM - PN16

25MM - PN16 - LILAC

32MM - PN8

32MM - PN10


32MM - PN12.5


32MM - PN16

32MM - PN16 - LILAC

100208458

100414501

100414509

100414494

100414496

100414568

100414502

100414481

100414575

100414511

100414512

100414578

100414514

100414582

4000130

100414520

100414521

100414587

4000180

100414526

4000230

3283260

4806153

100414579

100414583

4000190

100414625

100414527

100414590

100414528

100414472

3283579

4554480

4626382

100414474

100414532

100414533

100414453

100414486

4000370

100414518

100414618

100414465

100414516

100414584

100414621

100414523

100414524

100414588

100414493

100414560

100414495

4000030

100414500

100414572

100414573

100414606

100414464

100414574

100414506

100414507

100414577

4515110

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

CODE

CODE

Note: Pipe coils are black with blue line unless otherwise indicated.



POLYETHYLENE PIPE - 6 METRE STRAIGHT POLYETHYLENE PIPE - 12 METRE STRAIGHT

POLYETHYLENE PRESSURE PIPE - STRAIGHT LENGTHS

25MM - PN12.5 - BLUE32MM - PN12.5 - BLUE32MM - PN16 - BLACK40MM - PN12.5 - BLUE40MM - PN16 - BLACK50MM - PN12.5 - BLUE50MM - PN16 - BLACK63MM - PN12.5 - BLACK63MM - PN16 - BLUE63MM - PN16 - BLACK75MM - PN12.5 - BLUE75MM - PN16 - BLUE90MM - PN12.5 - BLUE90MM - PN16 - BLUE90MM - PN16 - BLACK110MM - PN12.5 - BLUE110MM - PN16 - BLACK110MM - PN16 - LILAC110MM - PN16 - RED125MM - PN16 - LILAC125MM - PN12.5 - BLUE125MM - PN16 - BLACK125MM - PN16 - BLUE125MM - PN16 - RED160MM - PN16 - BLUE180MM - PN16 - BLACK180MM - PN16 - BLACK

63MM - PN16 - BLACK63MM - PN16 - BLUE75MM - PN16 - BLACK75MM - PN16 - LILAC90MM - PN12.5 - BLUE90MM - PN16 - BLACK90MM - PN16 - LILAC110MM - PN10 - BLACK110MM - PN12.5 - BLUE110MM - PN16 - BLUE110MM - PN16 - BLACK110MM - PN20 - BLACK125MM - PN16 - BLACK125MM - PN16 - RED140MM - PN16 - BLACK160MM - PN6.3 - BLACK160MM - PN12.5 - BLUE160MM - PN16 - BLACK160MM - PN20 - BLACK180MM - PN16 - BLACK200MM - PN12.5 - BLUE200MM - PN16 - BLACK

100414504 4000480100414580100414519100414585100414525100414589100414530100414591100414592100414485100414593100414535100414595100414596100414478100414551100414538100414552100414540100414491100414556100414555100414557100414559100414564 4814080

4000580 4000585 4806225 4000620 4806230100414594 4000690100414455100414488 4000730100414549 4000750100414553100414554 4000910 4605455 4410511100414558100414598100414562 4001025100414567


PIPE - SDR11 PIPE - SDR17

WARNING TAPE

16MM X 100M20MM X 100M20MM X 200M32MM X 50M32MM X 100M40MM X 50M40MM X 100M40MM X 150M50MM X 7M50MM X 100M63MM X 100M90MM X 7M110MM X 6M110MM X 12M125MM X 12M160MM X 12M180MM X 12M

16MM X 400M

25MM X 200M

100M X 150MM - GAS -

DETECTABLE

4020000 4020020 4020030100414697100414698 4020070 4020080 4020090 4020100 4020110100414398100414700100414696 4020140 4020150 4020160 4020170

4020010

4020040

2605777


DESCRIPTION CODE

PE80 GAS PIPE




PLASSON® ELECTROFUSION FITTINGSPolyethylene electrofusion system for pressure and waste applications

Electrofusion is where a fitting with built in metal winding is heated by an electric current. The material melts progressively and causes the pipe surface to melt and fuse with the fitting. After cooling, a perfect cohesion of the fitting and pipe joint is obtained.

Total Eden supply a wide range of Plasson electrofusion fittings which are designed with utomatic weld time recognition, one weld voltage and do not require temperature compensation across their operating range. Once the welding machine is operating the weld is performed automatically, welding terminals include identification devices to monitor weld time and all aspects of the weld are controlled over all climatic conditions and voltages.

In conjunction with electrofusion we also supply a full range of buttweld fittings for large diameter applications.

Total Eden can supply the right tools for successful electrofusion installation including control boxes, scrapers, clamps and cleaning products. A full range of polyethylene pipe to suit Plasson electrofusion fittings is also available.



COUPLINGS - PN16

LIGHTFIT COUPLINGS - PN10

22.5O ELBOWS - PN16

45O ELBOWS - PN16END CAPS - PN16

REDUCING COUPLINGS - PN16

PLASSON ELECTROFUSION FITTINGS

20MM

25MM

32MM

40MM

50MM

63MM

75MM

90MM

110MM

125MM

140MM

160MM

180MM

200MM

225MM

250MM

280MM

315MM

355MM

400MM

110MM

125MM

160MM

200MM

250MM

315MM

400MM

450MM

500MM

560MM

90MM

100MM

125MM

160MM

180MM

32MM

40MM

50MM

63MM

75MM

90MM

110MM

125MM

140MM

160MM

180MM

200MM

225MM

250MM

20MM25MM32MM40MM50MM63MM75MM90MM110MM125MM140MM160MM180MM200MM225MM250MM

20MM X 16MM

25MM X 20MM

32MM X 20MM

32MM X 25MM

40MM X 32MM

50MM X 32MM

50MM X 40MM

63MM X 32MM

63MM X 40MM

63MM X 50MM

75MM X 63MM

90MM X 50MM

90MM X 63MM

110MM X 63MM

110MM X 90MM

125MM X 90MM

125MM X 110MM

160MM X 90MM

160MM X 110MM

160MM X 125MM

180MM X 125MM

100403643

100403648

100403654

100403658

100403660

100403662

100403664

100403666

100403631

100403633

100403635

100403637

100403639

100403641

100403644

100403646

100403650

100403652

4503680

100403657

100403615

100403616

100403617

100403619

100403621

100403623

100403625

100403626

4503687

4503688

100405573

100405574

100405575

4300130

100405576

100405648

100405650

100405652

100405654

100405656

100405658

100405637

100405639

100405640

100405642

100405644

100405645

100405646

100405647

4300060 4300070100406690100406692 4806495100406695100406697100406699100406680100406682 4300080100406684100406685 4300100 4300110100406687

4300010

100403955

4300020

100403958

100403960

100403961

100403963

100403965

100403967

100403969

100403970

100403972

100403973

100403942

100403945

100403947

100403948

4300040

100403950

100403951

100403953

DESCRIPTION

DESCRIPTION

DESCRIPTION


DESCRIPTION CODE

CODE

CODE

CODE CODE

CODE



90O ELBOWS - PN16

180O GEOTHERMAL ELBOWS - PN16

MI ADAPTORS - PN16

MI ADAPTORS - BRASS - PN16

FI ADAPTORS - BRASS - PN16

FI COUPLINGS - BRASS OUTLET - PN16

MI COUPLINGS - BRASS OUTLET - PN16


20MM

25MM

32MM

40MM

50MM

63MM

75MM

90MM

110MM

125MM

140MM

160MM

180MM

200MM

225MM

250MM

25MM

32MM

40MM

25MM X 3/4’’

32MM X 1’’

40MM X 1’’

40MM X 1 1/4’’

40MM X 1 1/2’’

50MM X 1 1/2’’

63MM X 1 1/2’’

63MM X 2’’

20MM X 1/2’’

25MM X 3/4’’

32MM X 1’’

32MM X 1 1/4’’

40MM X 2’’

50MM X 1’’

63MM X 1 1/2’’

75MM X 2’’

25MM X 3/4’’

32MM X 1’’

50MM X 1 1/2’’

50MM X 2’’

20MM X 1/2”

25MM X 3/4”

32MM X 3/4”

32MM X 1”

40MM X 1”

40MM X 1 1/4”

40MM X 1 1/2”

50MM X 1 1/2”

50MM X 2”

63MM X 2”

25MM X 3/4”

32MM X 1”

32MM X 1 1/4”

32MM X 1 1/2”

40MM X 1”

40MM X 1 1/4”

40MM X 1 1/2”

40MM X 2”

50MM X 1”

50MM X 1 1/2”

50MM X 2”

63MM X 1 1/2”

63MM X 2”

75MM X 2”

75MM X 2 1/2”

100405861

100405865

100405867

100405869

100405871

100405873

100405875

100405877

100405853

100405855

100384891

100405857

100405859

100405860

100405862

100405863

100405572

4300240

4300250

4300690

100397676

4300700

4300710

4503173

100397672

4503185

100397677

4300730

100397668

4300750

4300760

4300780

4300790

100397673

100397675

4300820

100397669

100397671

100397670

100423800

100423804

100423805

100423808

100423816

100423812

100423811

100423820

100423818

100423824

100423803

100423807

100423806

4300870

100423814

100423813

100423810

100423809

4300880

100423819

100423817

100423825

100423823

100423829

100423828

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

CODE

CODE

CODE



STUB FLANGES - ELONGATED - PN16

TEES - PN16

REDUCING TEES - PN16

FI TRANSITION SADDLES - PN16

BRANCH SADDLES - WITH UNDERPART - PN16


25MM - SPIGOT32MM - SPIGOT40MM - SPIGOT50MM - SPIGOT63MM - SPIGOT90MM - SPIGOT110MM - SPIGOT125MM - SPIGOT140MM - SPIGOT160MM - SPIGOT180MM - SPIGOT200MM - SPIGOT225MM - SPIGOT250MM - SPIGOT280MM - SPIGOT315MM - SPIGOT355MM - SPIGOT400MM - SPIGOT

20MM25MM32MM40MM50MM63MM75MM90MM110MM125MM160MM180MM

32MM X 20MM32MM X 25MM40MM X 20MM40MM X 25MM40MM X 32MM50MM X 20MM50MM X 25MM50MM X 32MM50MM X 40MM63MM X 32MM63MM X 40MM63MM X 50MM90MM X 63MM110MM X 63MM110MM X 90MM125MM X 63MM125MM X 90MM125MM X 110MM160MM X 110MM180MM X 90MM180MM X 125MM200MM X 90MM

63MM X 1 1/4” - BRASS

75MM X 1 1/4” - BRASS

90MM X 2” - BRASS

110MM X 2” - BRASS




63MM X 32MM

63MM X 40MM

63MM X 63MM

75MM X 32MM

75MM X 40MM

75MM X 63MM

90MM X 32MM

90MM X 40MM

90MM X 50MM

90MM X 63MM

110MM X 32MM

110MM X 40MM

110MM X 50MM

110MM X 63MM

125MM X 32MM

125MM X 40MM

125MM X 50MM

125MM X 63MM

140MM X 32MM

140MM X 63MM

160MM X 32MM

160MM X 63MM

160MM X 110MM

180MM X 32MM

180MM X 63MM

180MM X 110MM

180MM X 125MM

200MM X 63MM

225MM X 63MM

250MM X 63MM

4300610 4806615100421304100421305100421306100421308100421292100421293100421294 9331880 4300660 4360970 4360980100421299 4361000 4361010 4361020 4361030

4300930100422586100422588100422589100422591100422593100422595100422597100422577100422579100422581100422583

4503960100423181 4503970100423182100423183100423184100423185100423186100423187100423188100423190100423191100423193100423167100423169 4301010100423172100423173100423176100423178100423180 4301030

4301100

4301110

4806740

100422132

100423855

4806750

4301150

4806755

4342260

100400357

4806760

100400358

100400359

4301190

4301200

4301210

100400360

2191810

4301230

4301240

100400352

100400353

4301260

100400354

100400355

4301280

4301290

4301300

4301310

4301320

4301330

100400356

2191852

4301340

4342180

4342190

4503845

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

CODE



END PLUGS

90O FI ELBOWS - BRASS OUTLET - PN16

BACKING RINGS - GALVANISED - TABLE E TO SUIT PE

BACKING RINGS - GALVANISED - TABLE D TO SUIT PE

BACKING RINGS STAINLESS STEEL* - TABLE D TO SUIT PE

ELECTROFUSION ACCESSORIES


20MM

25MM

50MM

63MM

75MM

90MM

110MM

125MM

140MM

160MM

180MM

200MM

225MM

250MM

25MM X 3/4”

32MM X 1”

40MM X 1”

50MM X 1 1/4”

50MM X 1 1/2”

50MM X 2”

63MM X 1 1/2”

63MM X 2”

20MM PIPE - 1/2” FLANGE

25MM PIPE - 3/4” FLANGE

32MM PIPE - 1” FLANGE

40MM PIPE - 1 1/4” FLANGE





















75MM PIPE 2 1/2” FLANGE-ANSI



110MM PIPE - 4” FLANGE - ANSI





160MM PIPE - 6” FLANGE - ANSI

















MONOMATIC E/F WELDERMONOMATIC E/F WELDER - RENTALDIGIMATIC E/F WELDERDIGIMATIC E/F WELDER WITH DATA & USB WIPES110MM - 315MM ROTATIONAL PIPE CUTTER - 40MM DEPTH75MM - 315MM - RITMO MECHANICAL PIPE SCRAPER

4301040

4503850

100406773

100406771

4301060

100406772

100406766

100406767

4301070

100406768

4301080

4806736

4806737

100406769

4300560

100423838

4806595

4300570

4300590

4806605

4300600

100423842

4301590

100398639

4301620

100398631

100398600

100398609

100398610

100398633

100398615

100398617

4301750

100398620

100398622

100398623

100398625

100398627

100398628

4301670

100398630

4301680

4806795

100398599

100398603

100398605

4320000

100398612

100398585

4320010

100398586

100398543

4806815

100398587

4320030

100398588

100398557

4320050

100398592

4806830

100398594

4320053

4806845

100407595

100407596

100407597

4301710

100407598

100407593

100407594

4301760

100426593 100409602 4301580 4301610100426660 4320380 4320390

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

CODE

CODE

* Grade 316 Stainless Steel



COUPLINGS

REDUCING COUPLINGS

FI ADAPTORS

MI ADAPTORS

PLASSON COMPRESSION FITTINGS - METRIC

16MM X 16MM

20MM X 20MM

25MM X 25MM

32MM X 32MM

40MM X 40MM

50MM X 50MM

63MM X 63MM

75MM X 75MM

90MM X 90MM

110MM X 110MM

125MM X 125MM

160MM X 160MM

20MM X 16MM

25MM X 16MM

25MM X 20MM

32MM X 20MM

32MM X 25MM

40MM X 25MM

40MM X 32MM

50MM X 25MM

50MM X 32MM

50MM X 40MM

63MM X 25MM

63MM X 32MM

63MM X 40MM

63MM X 50MM

75MM X 50MM

75MM X 63MM

90MM X 63MM

90MM X 75MM

110MM X 90MM

16MM X 1/2”

16MM X 3/4”

20MM X 1/2”

20MM X 3/4”

20MM X 1”

25MM X 3/4”

25MM X 1”

32MM X 3/4”

32MM X 1”

32MM X 1 1/4”

40MM X 1”

40MM X 1 1/4”

40MM X 1 1/2”

50MM X 1 1/4”

50MM X 1 1/2”

50MM X 2”

63MM X 1 1/2”

63MM X 2”

75MM X 2”

75MM X 2 1/2”

90MM X 2”

90MM X 3”

90MM X 4”

110MM X 3”

110MM X 4”

16MM X 1/2”

16MM X 3/4”

20MM X 1/2”

20MM X 3/4”

20MM X 1”

25MM X 1/2”

25MM X 3/4”

25MM X 1”

32MM X 3/4”

32MM X 1”

32MM X 1 1/4”

32MM X 1 1/2”

40MM X 1”

40MM X 1 1/4”

40MM X 1 1/2”

40MM X 2”

50MM X 1”

50MM X 1 1/4”

50MM X 1 1/2”

50MM X 2”

63MM X 1 1/4”

63MM X 1 1/2”

63MM X 2”

63MM X 2 1/2”

75MM X 2”

75MM X 2 1/2”

75MM X 3”

90MM X 2”

90MM X 2 1/2”

90MM X 3”

90MM X 4”

110MM X 2”

110MM X 3”

110MM X 4”

100403753

100403754

100403756

100403758

100403760

100403762

100403766

100403767

100403769

100403771

4505355

3374255

100403982

100403985

100403983

100403986

100403987

100403989

100403992

100403764

100403993

100403994

4564320

100403996

100403997

100403998

100404000

100404002

100404003

100404004

100403980

100397804

100397802

100397812

100397806

100397810

100397819

100397814

100397828

100397831

100397824

100397839

100397842

100397835

100397851

100397853

100397846

100397858

100397860

100397866

100397870

100397874

100397877

100397881

100397797

100397799

100397805

100397803

100397813

100397808

100397811

100397823

100397820

100397816

100397829

100397832

100397826

100397834

100397840

100397843

100397837

100397845

100397850

100397852

100397855

100397848

100397857

100397859

100397862

100397864

100397868

100397865

100397872

100397876

3373991

100397879

100397882

3373101

100397798

100397800

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

Plasson compression fittings are an easy connection system for water supply and compressed air applications.



90O ELBOWS

90O MI ELBOWS

90O FI ELBOWS

FI WALLPLATE ELBOWS

TEES


16MM 20MM 25MM 32MM 40MM 50MM 63MM 75MM 90MM 110MM

20MM X 1/2”20MM X 3/4”25MM X 1/2”25MM X 3/4”25MM X 1”32MM X 1”32MM X 1 1/4”40MM X 1”40MM X 1 1/2”50MM X 1”50MM X 1 1/4” 50MM X 1 1/2”63MM X 2”75MM X 2 1/2”75MM X 3”90MM X 3”110MM X 4”

16MM X 1/2”20MM X 1/2”20MM X 3/4”25MM X 3/4”25MM X 1”32MM X 3/4”32MM X 1”32MM X 1 1/4”40MM X 1”40MM X 1 1/4” 40MM X 1 1/2”40MM X 2”50MM X 1”50MM X 1 1/4”50MM X 1 1/2”50MM X 2”63MM X 1 1/4”63MM X 1 1/2”63MM X 2”75MM X 2”75MM X 2 1/2”75MM X 3”

16MM X 1/2”

20MM X 1/2”

25MM X 3/4”

16MM

20MM

25MM

32MM

40MM

50MM

63MM

75MM

90MM

110MM

100406294100406295100406300100406307100406312100406319100406325100406328100406333100406292

100406299100406297100406306100406304100406302100406311100406281100406316100406314100406287 4564425100406324100406327 4564450100406331100406334 3673485

100406293100406298100406296100406303100406301100406309100406310100406308100406315100406317100406313 3573482100406321100406322100406323100406320100406288100406289100406326100406329 3373453100406330

100406337

100406338

100406339

100422818

100422821

100422825

100422829

100422833

100422837

100422840

100422844

100422848

100422816

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

CODE

FI TEES

16MM X 1/2”16MM X 3/4”20MM X 16MM X 3/4”20MM X 1/2”20MM X 3/4”25MM X 20MM X 3/4”25MM X 1/2”25MM X 3/4”25MM X 1”25MM X 1 1/4”32MM X 25MM X 1”32MM X 3/4”32MM X 1”32MM X 1 1/4” 32MM X 1 1/2” 40MM X 1”40MM X 1 1/4”40MM X 1 1/2”40MM X 2”50MM X 1 1/2”50MM X 2”63MM X 1 1/4”63MM X 1 1/2”63MM X 2”75MM X 2”75MM X 2 1/2”75MM X 3”90MM X 3”

100422820100422819100422824100422823100422822 4210240100422828100422827100422826 4564800100423218100422831100422832100422830 4564805100422805100422836100422834 4564815100422839100422838100422841100422842100422843100422845100422846100422847100422849

DESCRIPTION CODE



POLY TO COPPER TEES

END PIECES

TAPPING SADDLES WITH REINFORCED RING TAPPINGS SADDLES WITH REINFORCED RING - CONT.

POLY TO COPPER CONNECTORS

POLY TO COPPER ELBOWS

POLY TO COPPER KITS

TAPPING SADDLES - SUIT METRIC PE PIPE

25MM POLY X 15MM COPPER



25MM X 1/2”32MM X 1/2” 32MM X 3/4” 40MM X 3/4” 40MM X 1” 50MM X 1/2” 50MM X 3/4” 50MM X 1” 50MM X 1 1/4” 63MM X 3/4” 63MM X 1” 63MM X 1 1/4” 63MM X 1 1/2” 75MM X 3/4”

75MM X 1” 75MM X 1 1/2” 75MM X 2” 90MM X 3/4” 90MM X 1 1/2” 140MM X 2” 140MM X 3” 160MM X 1 1/2”250MM X 2” 250MM X 3” 250MM X 4” 315MM X 3”









4210130

100423859

100406776100406777100406778100406779100406780100406782100406783100406774

100422111100422116100422115100422117 4564600100422190100422118100422188 4564617100422119100422120 4564630100422121100422122

100422123100422124100422125 4806445100422127100422207 4564690100422098100422108100422109100422110 4564770

100423786

100423831

100423789

100403185

100423848

100406340

100402964

100402965

DESCRIPTION

DESCRIPTION


DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE CODE

CODE

CODE

CODE

REDUCING TEES

25MM X 25MM X 20MM

32MM X 32MM X 25MM

40MM X 40MM X 32MM

50MM X 50MM X 25MM

50MM X 50MM X 32MM

50MM X 50MM X 40MM

63MM X 63MM X 32MM

63MM X 63MM X 40MM

63MM X 63MM X 50MM

75MM X 75MM X 63MM

100423203

100423204

100423207

100423209

100423210

100423211

100423213

100423214

100423215

100423217

DESCRIPTION CODE




90O ELBOWS

COUPLINGS

FI ADAPTOR

MI ADAPTOR

90O FI ELBOWS

90O MI ELBOWS

3/4”1”1 1/4”1 1/2”2”

3/4” X 3/4”1” X 1”1 1/4” X 1 1/4”1 1/2” X 1 1/2”2” X 2”

3/4” X 1/2”3/4” X 3/4”3/4” X 1”1” X 3/4”1” X 1”1 1/4” X 3/4”1 1/4” X 1”1 1/4” X 1 1/4”1 1/2” X 1”1 1/2” X 1 1/4”1 1/2” X 1 1/2”2” X 1 1/4”2” X 1 1/2”2” X 2”

3/4” X 1/2”3/4” X 3/4”3/4” X 1”1” X 1/2”1” X 3/4”1” X 1”1 1/4” X 3/4”1 1/4” X 1”1 1/4” X 1 1/4”1 1/4” X 1 1/2”1 1/2” X 1”1 1/2” X 1 1/4”1 1/2” X 1 1/2”1 1/2” X 2”2” X 1”2” X 1 1/4”2” X 1 1/2”2” X 2”

3/4” X 1/2” 3/4” X 3/4” 1” X 3/4” 1” X 1” 1 1/4” X 3/4” 1 1/4” X 1” 1 1/4” X 1 1/4” 1 1/2” X 1” 1 1/2” X 1 1/4” 1 1/2” X 1 1/2” 1 1/2” X 2” 2” X 1” 2” X 1 1/4” 2” X 1 1/2” 2” X 2”

3/4” X 1/2”3/4” X 3/4”1” X 1/2”1” X 3/4”1” X 1”1 1/4” X 1”1 1/4” X 1 1/4”1 1/2” X 1”1 1/2” X 1 1/4”1 1/2” X 1 1/2”2” X 1”2” X 1 1/4”2” X 1 1/2”

100406527100406517100406511100406505100406522

100403927100403923100403921100403919100403925

4563780100398069 4210020100398049100398053100398038100398040100398043100398029100385529100398027 4806335100398060100398064

100398068100398071100398073100398048100398052100398055100398039100398042100398045100398047 4603110100398032100398034100398036100398057100398059100398063100398066

100406528100406529100406518100406520100406512100406513100406515100406507100406509100406510 4516400100406531 4603125100406524100406526

4806345100406530 3422174100406519100406521100406514100406516100406508100406504100406506 4210040100406523100406525

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

CODE

CODE

IMPERIAL / RURAL POLYETHYLENE PIPE

1/2” X 300M

3/4” X 200M

1” X 200M

1 1/4” X 150M

1 1/2” X 150M

1 1/2” X 300M

2” X 100M

2” X 200M

2 1/2” X 100M

3” X 100M

4806080

100414942

100414934

100414931

100414929

4625180

100414938

100414939

4806087

100414943

DESCRIPTION CODE

IMPERIAL / RURAL POLY PIPE AND FITTINGS



REDUCING COUPLINGS

FI TEES

MI TEES

END PLUGS

TEES REDUCING TEES

3/4” X 16MM1” X 16MM1” X 3/4”1 1/4” X 3/4”1 1/4” X 1”1 1/2” X 1”1 1/2” X 1 1/4”2” X 1”2” X 1 1/4” 2” X 1 1/2”

3/4” X 1/2”3/4” X 3/4”1” X 3/4” X 3/4”1” X 1/2”1” X 3/4”1” X 1”1” X 1 1/4” 1 1/4” X 1” X 1”1 1/4” X 3/4”1 1/4” X 1”1 1/4” X 1 1/4”1 1/4” X 1 1/2”1 1/2” X 1”1 1/2” X 1 1/4”1 1/2” X 1 1/2”1 1/2” X 2”2” X 1 1/2”2” X 2”

3/4” X 1/2”3/4” X 3/4”1” X 1/2”1” X 3/4”1 1/4” X 1”1 1/2” X 1 1/4”1 1/2” X 1 1/2”2” X 1 1/2”

1”1 1/4”1 1/2”2”

3/4”1”1 1/4”1 1/2”2”

1” X 3/4”1 1/4” X 1” 1 1/2” X 1 1/4”2” X 1”2” X 1 1/4”2” X 1 1/2”

4563845 4210000100404104100404103100404101100404100100404099100404109100404108100404106

100423130100423129 4210050100423113100423116100423118 4210060 4210070100423104100423106100423108100423110100423097100423098100423100 4210080100423123100423125

100423131100422793100423114100423117100423107 4806390100423101100423124

100415502100415501100415500100415503

100423127100423111100423102100423095100423120

100423278100423276100423273100423282100423281100423279

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION


CODE

CODE

CODE

CODE

CODE CODE

IMPERIAL / RURAL POLY PIPE AND FITTINGS



PE100 BUTTWELD PRESSURE FITTINGS - PN16, SDR1145O BENDS - LONG RADIUS - LONG SPIGOT

90O BENDS - LONG RADIUS - LONG SPIGOT

45O ELBOWS - SHORT SPIGOT

45O ELBOWS - LONG SPIGOT

90O BENDS - SHORT SPIGOT90O ELBOWS - LONG SPIGOT

90MM110MM125MM140MM160MM180MM200MM225MM250MM280MM315MM355MM400MM450MM500MM560MM630MM


25MM32MM40MM50MM63MM75MM90MM110MM140MM160MM180MM200MM225MM




43601704360180436019043602004360210436022043602304360240436025043602604360270436028043602904360300436031043603204360330

43600004360010436002043600304360040436005043600604360070436008043600904360100436011043601204360130436014043601504360160

4362840436285043628604362870436288043628904362900436291043629204362930436294043629504362960

43605104360520436053043605404360550436056043605704360580436059043606004360610436062043606304360640436065043606604360670

43618604361870436188043618904361900436191043619204361930436194043619504361960436197043619804361990436200043620104362020

43603404360350436036043603704360380436039043604004360410436042043604304360440436045043604604360470436048043604904360500

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION


CODE

CODE

CODE

CODE

CODE CODE

Suitable for Buttwelding and ElectrofusionSuitable for Buttwelding and Electrofusion

Suitable for Buttwelding and Electrofusion


Suitable for Buttwelding only




PE100 BUTTWELD PRESSURE FITTINGS - PN16, SDR11

TEES - LONG SPIGOT

STUB FLANGES - SHORT SPIGOT

CAPS - LONG SPIGOT

STUB FLANGES - LONG SPIGOT

25MM32MM40MM50MM63MM75MM90MM110MM125MM140MM160MM180MM200MM225MM250MM280MM315MM355MM400MM

250MM280MM315MM355MM400MM450MM500MM560MM630MM710MM



4360680 4360690 4360700 4360710 4360720 4360730 4360740 4360750 4360760 4360770 4360780 4360790100422948 4360800100422950 4360810 4360820 4360830 4360840

4361040436105043610604361070436108043610904361100436111043611204361130

4361670 4361680 4361690 4361700 4361710 4361720 4361730100401624100401625 4361760 4361770 4361780 4361790 4361800100401626 4361820 4361830 4361840 4361850

100421300 4360860 4360870 4360880 4360890 4360900 4360910 4360920 4360930 4360940100421295 4360960 4360970 4360980100421299 4361000 4361010 4361020 4361030

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE





TEES - SHORT SPIGOT


43629704362980436299043630004363010436302043630304363040436305043630604363070436308043630904363100436311043631204363130

DESCRIPTION CODE

90O ELBOWS - SHORT SPIGOT

25MM32MM40MM50MM63MM75MM90MM110MM125MM140MM160MM180MM200MM225MM

43627004362710436272043627304362740436275043627604362770436278043627904362800436281043628204362830

DESCRIPTION CODE





PE100 BUTTWELD PRESSURE FITTINGS - PN16, SDR11REDUCERS - LONG SPIGOT REDUCERS - SHORT SPIGOT

32MM - 25MM40MM - 20MM40MM - 25MM40MM - 32MM50MM - 25MM50MM - 32MM50MM - 40MM63MM - 32MM63MM - 40MM63MM - 50MM75MM - 50MM75MM - 63MM90MM - 50MM90MM - 63MM90MM - 75MM110MM - 63MM110MM - 75MM110MM - 90MM125MM - 63MM125MM - 75MM125MM - 90MM125MM - 110MM140MM - 90MM140MM - 110MM140MM - 125MM160MM - 90MM160MM - 110MM160MM - 125MM160MM - 140MM180MM - 125MM180MM - 160MM200MM - 125MM200MM - 160MM225MM - 110MM225MM - 160MM225MM - 180MM250MM - 160MM250MM - 180MM250MM - 200MM250MM - 225MM280MM - 180MM280MM - 200MM280MM - 225MM280MM - 250MM315MM - 225MM315MM - 250MM315MM - 280MM355MM - 250MM355MM - 280MM355MM - 315MM400MM - 280MM400MM - 315MM400MM - 355MM

32MM - 25MM40MM - 25MM40MM - 32MM50MM - 25MM50MM - 32MM50MM - 40MM63MM - 32MM63MM - 40MM63MM - 50MM75MM - 40MM75MM - 50MM75MM - 63MM90MM - 50MM90MM - 63MM90MM - 75MM110MM - 50MM110MM - 63MM110MM - 75MM110MM - 90MM125MM - 63MM125MM - 75MM125MM - 90MM125MM - 110MM140MM - 75MM140MM - 90MM140MM - 110MM140MM - 125MM160MM - 90MM160MM - 110MM160MM - 125MM160MM - 140MM180MM - 90MM180MM - 110MM180MM - 125MM180MM - 140MM180MM - 160MM200MM - 125MM200MM - 140MM200MM - 160MM200MM - 180MM225MM - 110MM225MM - 140MM225MM - 160MM225MM - 180MM225MM - 200MM250MM - 160MM250MM - 180MM250MM - 200MM250MM - 225MM280MM - 200MM280MM - 225MM280MM - 250MM315MM - 200MM315MM - 225MM315MM - 250MM315MM - 280MM355MM - 250MM355MM - 280MM355MM - 315MM400MM - 280MM400MM - 315MM400MM - 355MM450MM - 400MM500MM - 450MM560MM - 500MM630MM - 500MM630MM - 560MM

43611404361150436116043611704361180436119043612004361210436122043612304361240436125043612604361270436128043612904361300436131043613204361330436134043613504361360436137043613804361390436140043614104361420436143043614404361450436146043614704361480436149043615004361510436152043615304361540436155043615604361570436158043615904361600436161043616204361630436164043616504361660

4362030436204043620504362060436207043620804362090436210043621104362120436213043621404362150436216043621704362180436219043622004362210436222043622304362240436225043622604362270436228043622904362300436231043623204362330436234043623504362360436237043623804362390436240043624104362420436243043624404362450436246043624704362480436249043625004362510436252043625304362540436255043625604362570436258043625904362600436261043626204362630436264043626504362660436267043626804362690






PE100 BUTTWELD PRESSURE FITTINGS - PN10, SDR1745O BENDS - LONG RADIUS - LONG SPIGOT


90O BENDS - SHORT SPIGOT


45O ELBOWS - SHORT SPIGOT90O BENDS - LONG RADIUS - LONG SPIGOT

90MM 110MM 125MM 140MM 160MM 180MM 200MM 225MM 250MM 280MM 315MM 355MM 400MM 450MM 500MM 560MM 630MM

63MM

75MM

90MM

110MM

125MM

140MM

160MM

180MM

200MM

225MM

250MM

280MM

315MM

50MM63MM75MM90MM110MM125MM140MM160MM180MM200MM225MM250MM280MM315MM

63MM

75MM

90MM

110MM

125MM

140MM

160MM

180MM

200MM

225MM

250MM

280MM

315MM

75MM

90MM

110MM

140MM

160MM

180MM

200MM

225MM


43633104363320436333043633404363350436336043633704363380436339043634004363410436342043634304363440436345043634604363470

4363480

4363490

4363500

4363510

4363520

4363530

4363540

4363550

4363560

4363570

4363580

4363590

4363600

43645404364550436456043645704364580436459043646004364610436462043646304364640436465043646604364670

4363610

4363620

4363630

4363640

4363650

4363660

4363670

4363680

4363690

4363700

4363710

4363720

4363730

4364770

4364780

4364790

4364800

4364810

4364820

4364830

4364840

43631404363150436316043631704363180436319043632004363210436322043632304363240436325043632604363270436328043632904363300

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION


CODE

CODE

CODE

CODE

CODE CODE









PE100 BUTTWELD PRESSURE FITTINGS - PN10, SDR1790O ELBOWS - SHORT SPIGOT

TEES - LONG SPIGOT

TEES - SHORT SPIGOT

STUB FLANGES - LONG SPIGOT

STUB FLANGES - SHORT SPIGOT

CAPS - LONG SPIGOT

75MM

90MM

110MM

125MM

140MM

160MM

180MM

200MM

225MM

63MM

75MM

90MM

110MM

125MM

140MM

160MM

180MM

200MM

225MM

250MM

280MM

315MM

50MM

63MM

75MM

90MM

110MM

125MM

140MM

160MM

180MM

200MM

225MM

250MM

280MM

315MM

63MM

75MM

90MM

110MM

125MM

140MM

160MM

180MM

200MM

225MM

250MM

280MM

315MM

355MM

400MM

355MM

400MM

450MM

500MM

560MM

630MM

710MM

800MM

900MM

1000MM

63MM

75MM

90MM

110MM

125MM

140MM

160MM

180MM

200MM

225MM

250MM

280MM

315MM

355MM

400MM

4364680

4364690

4364700

4364710

4364720

4364730

4364740

4364750

4364760

4363740

4363750

4363760

4363770

4363780

4363790

4363800

4363810

4363820

4363830

4363840

4363850

4363860

4364850

4364860

4364870

4364880

4364890

4364900

4364910

4364920

4364930

4364940

4364950

4364960

4364970

4364980

4363870

4363880

4363890

4363900

4363910

4363920

4363930

4363940

4363950

4363960

4363970

4363980

4363990

4364000

4364010

4364020

4364030

4364040

4364050

4364060

4364070

4364080

4364090

4364100

4364110

4365610

4365620

4365630

4365640

4365650

4365660

4365670

4365680

4365690

4365700

4365710

4365720

4365730

4365740

4365750

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

CODE

CODE









PE100 BUTTWELD PRESSURE FITTINGS - PN10, SDR17REDUCERS - LONG SPIGOT REDUCERS - SHORT SPIGOT

75MM - 63MM90MM - 50MM90MM - 63MM90MM - 75MM110MM - 63MM110MM - 75MM110MM - 90MM125MM - 63MM125MM - 75MM125MM - 90MM125MM - 110MM140MM - 90MM140MM - 110MM140MM - 125MM160MM - 90MM160MM - 110MM160MM - 125MM160MM - 140MM180MM - 125MM180MM - 160MM200MM - 125MM200MM - 160MM225MM - 110MM225MM - 160MM225MM - 180MM250MM - 160MM250MM - 180MM250MM - 200MM250MM - 225MM280MM - 180MM280MM - 200MM280MM - 225MM280MM - 250MM315MM - 225MM315MM - 250MM315MM - 280MM355MM - 250MM355MM - 280MM355MM - 315MM400MM - 280MM400MM - 315MM400MM - 355MM

50MM - 40MM63MM - 32MM63MM - 40MM63MM - 50MM75MM - 40MM75MM - 50MM75MM - 63MM90MM - 50MM90MM - 63MM90MM - 75MM110MM - 50MM110MM - 63MM110MM - 75MM110MM - 90MM125MM - 63MM125MM - 75MM125MM - 90MM125MM - 110MM140MM - 75MM140MM - 90MM140MM - 110MM140MM - 125MM160MM - 90MM160MM - 110MM160MM - 125MM160MM - 140MM180MM - 90MM180MM - 110MM180MM - 125MM180MM - 140MM180MM - 160MM200MM - 125MM200MM - 140MM200MM - 160MM200MM - 180MM225MM - 110MM225MM - 140MM225MM - 160MM225MM - 180MM225MM - 200MM250MM - 160MM250MM - 180MM250MM - 200MM250MM - 225MM280MM - 200MM280MM - 225MM280MM - 250MM315MM - 200MM315MM - 225MM315MM - 250MM315MM - 280MM355MM - 250MM355MM - 280MM355MM - 315MM400MM - 280MM400MM - 315MM400MM - 355MM450MM - 400MM500MM - 450MM560MM - 500MM630MM - 500MM630MM - 560MM

4364120 4364130 4364140 4364150100417544 4364170100417545 4364190 4364200 4364210 4364220 4364230 4364240 4364250100417546 4364270 4364280100417549100417550 4364310 4364320 4364330 4364340100417552100417553100417554 4364380 4364390 4364400 4364410 4364420 4364430 4364440 4364450 4364460100417556 4364480 4364490 4364500 4364510 4364520 4364530

43649904365000436501043650204365030436504043650504365060436507043650804365090436510043651104365120436513043651404365150436516043651704365180436519043652004365210436522043652304365240436525043652604365270436528043652904365300436531043653204365330436534043653504365360436537043653804365390436540043654104365420436543043654404365450436546043654704365480436549043655004365510436552043655304365540436555043655604365570436558043655904365600





ELECTRICALELECTRICAL

ELECTRICAL PRODUCTSPVC electrical conduits are designed to protect cables in a range of buried and above ground installations.

Total Eden distributes PVC conduit along with a range of PVC fittings to complement the full range of conduit direct to plumbing, civil, road making and commercial electrical contractors. In addition heavy duty cable cover is available for the protection of high voltage conduits.

PVC conduits for electrical cables are manufactured to AS2053 and available in sizes from 16mm though to 150mm.


ELECTRICAL

HEAVY DUTY ORANGE CONDUIT SOLID WALL - 4M

HEAVY DUTY ORANGE CONDUIT - FOAM CORE - 4M

HEAVY DUTY ORANGE CONDUIT - CORFLO - 6M

MEDIUM DUTY GREY CONDUIT - 4M LENGTHS

FLEXIBLE GREY ELECTRICAL CONDUIT

LIGHT DUTY ORANGE CONDUIT - 6M LENGTHS

PE BORE CONDUIT - ORANGE ELECTRICAL

22O ELECTRICAL SWEEP BENDS


CONDUIT AND FITTINGS

20MM

25MM

32MM

40MM

50MM

63MM

80MM

100MM

125MM

150MM

100MM

125MM

150MM

100MM

125MM

150MM

16MM

20MM

25MM

32MM

40MM

50MM

20MM X 20M

20MM X 50M

25MM X 20M

25MM X 50M

80MM

100MM

125MM

63MM X 140M

110MM X 100M

125MM X 100M

140MM X 60M

140MM X 100M

180MM X 12M

50MM - 300MM RADIUS

63MM - 300MM RADIUS

80MM - 380MM RADIUS

100MM - 450MM RADIUS



20MM - 150MM RADIUS

25MM - 150MM RADIUS

32MM - 225MM RADIUS

40MM - 300MM RADIUS

50MM - 300MM RADIUS

63MM - 300MM RADIUS

80MM - 380MM RADIUS




100403106

100403107

100403108

100403109

100403110

100403111

100403112

100403103

100403115

100403105

100403102

100403104

100403114

100403101

2570015

2570020

100403116

100403118

100403119

100403120

100403121

100403122

2570060

2570070

2570080

100403099

3284051

100403126

100403127

2580000

100403095

2580020

100403096

2580040

2580050

100399344

100399345

100399346

100399370

100399347

100399349

100399409

100399410

100399412

100399510

100399413

100399511

100399414

100399512

100399513

100399514

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE


20MM - 150MM RADIUS

25MM - 150MM RADIUS

32MM - 225MM RADIUS

40MM - 300MM RADIUS

50MM - 300MM RADIUS

63MM - 300MM RADIUS

80MM - 380MM RADIUS




100399620

100399621

100399622

100399726

100399727

100399728

100399702

100399729

100399730

100399731

DESCRIPTION CODE


ELECTRICAL

HEAVY DUTY ELECTRICAL COUPLINGS

HEAVY DUTY ELECTRICAL SLIP COUPLINGS

HEAVY DUTY REDUCERS

BELL MOUTHS - ELECTRICAL

ADAPTORS

PIT BUSHES - ELECTRICAL

HEAVY DUTY ELECTRICAL END CAPS

POLY DUST CAPS TO SUIT ELECTRICAL CONDUIT

CABLE COVERS

ELECTRICAL WARNING TAPES

ROPE AND PULL CORD

CONDUIT AND FITTINGS

20MM

25MM

32MM

40MM

50MM

63MM

80MM

100MM

125MM

150MM

40MM

50MM

63MM

80MM

100MM

125MM

150MM

63MM - 50MM

100MM - 63MM

125MM - 100MM

150MM - 100MM

150MM - 125MM

40MM

50MM

63MM

80MM

100MM

125MM

150MM

110MM PE TO 100MM PVC





32MM

50MM

100MM

32MM

40MM

50MM

63MM

80MM

100MM

125MM

150MM

40MM

50MM

63MM

80MM

100MM

125MM

150MM

25M X 150MM X 5MM

25M X 200MM X 5MM

20M X 300MM X 5MM

500M X 150MM - NON DETECT

250M X 100MM - DETECTABLE

300M X 150MM - DETECTABLE

3MM - JETLINE CONDUIT PULL

CORD

3MM X 1000M - 0.9KN TELSTRA

ROPE - ORANGE

6MM X 400M - 5.9KN TELSTRA

ROPE - BLUE & YELLOW

100403496

100403497

100403499

100403723

100403724

100403725

8890061

100403720

100403721

100403722

2570100

2570110

2570120

2570130

100404186

100404187

100404188

100404012

100404008

100404009

100404010

100404011

2560300

2560305

2560310

2560315

100398911

2560325

2560330

100397939

100397969

100397940

100397941

100397942

100415323

100415324

100415322

100401594

100401595

100401596

100401521

100401522

100401591

100401592

100401593

100405291

2580440

2580450

100405292

100405289

100401501

100405290

4583972

100401872

4583974

100422317

100422307

100422321

100410464

4805505

100418518

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE


ELECTRICAL


DUCT & TEFLON TAPES

SPOT MARKING PAINT

PRIMING FLUIDS



NON PRESSURE SOLVENT CEMENT AND PRIMERS

CONSUMABLES

125ML - BLUE

250ML - BLUE

250ML - CLEAR

500ML - BLUE

500ML - CLEAR

1LT - BLUE

4LT - BLUE

4LT - CLEAR

20LT - CLEAR

DUCT TAPE


10M X 12MM TEFLON TAPE,

PINK

RED

YELLOW

WHITE

FLURO PINK

BLUE

BLACK

250ML - RED

250ML - CLEAR

500ML - RED

500ML - CLEAR

1LT - RED

4LT - RED

4LT - CLEAR


CLEAR NEUTRAL CURE

TRENCHING SHOVEL

PLUMBERS SHOVEL

GARDEN SPADE

100420283

100420285

100420288

100420287

100420289

100420284

100420286

100420279

100420258

100422272

3081640

4805665

100413930

100413931

100413927

100413933

100413928

9920797

100416981

100416976

100416983

100416978

100416980

100416982

100416977

4805680

100419330

100419318

100420315

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

CODE

CODE

CODE

CODE

CODE

CODE

PLUMBING CATALOGUE TOTALEDEN.COM.AUPLUMBING CATALOGUE TOTALEDEN.COM.AU132

PLASTIC WELDERS


DRADER® INJECTIWELDRepair, fabricate and prototype with Drader's high quality plastic welds.

Drader's unique Injectiweld system is known around the world for its high quality welds and ease of use. The patented Injectiweld process injects high pressure molten weld rod below the surface of the plastic creating a very strong bond. The Drader Injectiweld is capable of producing strong inconspicuous welds as small as 1.5mm.

The Injectiweld is ideal for bonding thermoplastics such as polyethylene, polypropylene,polycarbonate, polyamides, ABS and polystyrene.

Drader Injectiweld at a glance:• Strong welds - over 95% bond strength, very close to virgin material• Portable - ideal for onsite repairs• Compact - one handed use allows you to reach confined space easily• No oxidation - does not use hot air• Interchangeable welding tips - to best suit your needs• Custom welding rods - get an exact colour and material match

Total Eden is proudly the Australasian distributor and service agent for the Drader Injectiweld. For Drader sales and service please call us on 1300 65 40 40.

PLUMBING CATALOGUETELEPHONE 1300 65 40 40 133PLUMBING CATALOGUE TOTALEDEN.COM.AU

WATER TANKS

PLUMBING CATALOGUE TOTALEDEN.COM.AUPLUMBING CATALOGUETELEPHONE 1300 65 40 40

3PLUMBING CATALOGUETELEPHONE 1300 65 40 40

WATER TANKSTotal Eden has been providing rainwater harvesting solutions for over 20 years and has access to all the major brands of metal and polyethylene tanks across Australia.

We boast the personnel with the skills and experience to design a complete water tank system tailored to your budget and specific needs:

Drader Injectiweld at a glance:• Tanks for water reclamation and re-use for industrial and warehouse developments• Comprehensive systems for fire protection purposes• Large scale rural and commercial water storage tanks• Complete range of slim-line tanks for domestic and commercial use• Pumps, hose kits, pipe, rainwater harvesting controllers and accessories

Plastic rainwater tanks range from 330 litres 45,000 litres. Metal corrugated water tanks range in size up to 250,000 litres and come in zincalume or the full range of Colorbond® colours. Flat panel metal tanks for large scale applications range from 10 - 1,000 kilolitres.Whatever your water collection needs, contact us for the best service, advice and supply - nationwide.


TABLES AND CONVERSIONSPUMPS


15

20

25

32

40

50

65

80

100

125

150

155

175

195

200

225

250

300

375

48.25

60.35

75.35

88.90

114.30

140.20

160.25

168.25

200.25

219.10

225.30

250.35

280.40

315.45

400.50

45.2

56.8

71.0

83.7

107.8

132.2

151.3

158.7

190.1

206.7

213.8

237.7

266.2

299.5

380.3

1.53

1.78

2.18

2.60

3.25

4.00

4.47

4.78

5.08

6.20

5.75

6.33

7.10

7.97

10.10

1.9

2.8

4.3

6.1

10.0

15.1

20.0

22.0

29.0

38.0

35.0

44.0

55.0

69.0

113.0

33.55

42.25

48.25

60.35

75.35

88.90

114.30

140.20

160.25

168.25

200.25

219.10

225.30

250.35

280.40

315.45

400.50

30.5

38.5

44.1

55.2

68.9

81.3

104.6

128.4

146.9

154.2

185.2

200.8

208.5

231.7

259.4

292.0

370.7

1.53

1.88

2.08

2.58

3.22

3.80

4.85

5.90

6.68

7.03

7.53

9.15

8.40

9.33

10.50

11.73

14.90

1.3

2.0

2.6

4.2

6.4

8.8

14.7

22.3

29.0

31.0

42.0

56.0

51.0

63.0

80.0

101.0

166.0

26.75

33.55

42.25

48.25

60.35

75.35

88.90

114.30

140.20

160.25

168.25

200.25

219.10

225.30

250.35

280.40

315.45

400.50

23.7

29.8

37.5

42.8

53.7

67.0

79.0

101.7

124.9

142.7

149.9

180.6

195.2

203.1

225.8

252.9

284.5

361.2

1.53

1.88

2.38

2.73

3.33

4.18

4.95

6.30

7.65

8.78

9.18

9.83

11.95

11.10

12.28

13.75

15.48

19.65

1.0

1.6

2.6

3.4

5.3

8.2

11.5

20.0

28.5

38.0

40.0

55.0

72.0

67.0

82.0

104.0

133.0

216.0

21.35

26.75

33.55

42.25

48.25

60.35

75.35

88.90

114.30

140.20

160.25

168.25

200.25

219.10

225.30

250.35

280.40

315.45

400.50

17.8

22.4

28.1

35.4

40.5

50.5

63.2

74.6

96.0

117.7

134.7

141.4

171.5

184.2

192.9

214.4

240.1

270.2

343.0

1.78

2.18

2.73

3.43

3.88

4.93

6.08

7.15

9.15

11.25

12.78

13.43

14.38

17.45

16.20

17.98

20.15

22.63

28.75

0.9

1.5

2.3

3.7

4.8

7.6

12.8

16.2

27.0

44.6

58.0

60.0

78.0

112.0

95.0

118.0

149.0

190.0

310.0

½”

”

”

”

”

”

”

”

”

”

”

”

1”

1 ”

1 ½”

2”

2 ½”

3”

4”

5

6

6

7

8

8

9

10

12

15

UPVC PRESSURE PIPE DIMENSIONS AS/NZS 1477 SERIES 1 - 6 METRE LENGTHS

PN6PIPESIZE

MEANBORE DI

MMMM INCHES

MEANODMM

34

14

PN9 PN12 PN18

MEANWALLMM

MASSKG/6MLENGTH

MEANBORE DI

MM

MEANODMM

MEANWALLMM

MASSKG/6MLENGTH

MEANBORE DI

MM

MEANODMM

MEANWALLMM

MASSKG/6MLENGTH

MEANBORE DI

MM

MEANODMM

MEANWALLMM

MASSKG/6MLENGTH

PVC SCHEDULE 80 PIPE DIMENSIONS CLEAR PVC SCHEDULE 40 PIPE DIMENSIONS

PIPESIZE

15

20

25

32

40

50

65

80

100

155

195

250

300

350

400

450

500

600

SCHEDULE 80 PIPEPIPESIZE

MEANBORE DI

MMMM

MEANODMM

½”

”

”

”

”

”

”

”

”

”

”

1”

1 ”

1 ½”

2”

2 ½”

3”

4”

6

8

10

12

14

16

18

20

24

INCHES

34

14

MEANWALLMM

MASSKG/5.8MLENGTH

PIPESIZE

21.34

26.67

33.40

42.16

48.26

60.33

73.03

88.90

114.30

168.28

219.08

273.05

323.85

355.60

406.40

457.20

508.00

609.60

13.84

18.88

24.30

32.50

38.14

49.22

58.98

73.66

97.18

146.34

193.68

242.98

289.00

317.50

363.58

406.76

452.48

544.02

3.75

3.90

4.55

4.83

5.06

5.56

7.03

7.62

8.56

10.97

12.70

15.04

17.43

19.05

21.41

25.22

27.76

32.79

1.85

2.51

3.69

5.10

6.19

8.56

12.35

17.49

25.56

46.22

74.14

109.92

151.24

181.41

233.25

291.83

357.11

506.63

15

20

25

32

40

50

65

80

100

125

155

195

250

300

350

400

CLEAR SCHEDULE 40 PIPEPIPESIZE

MEANBORE DI

MMMM

MEANODMM

½”

”

”

6”

”

”

”

”

”

1”

1 ”

1 ½”

2”

2 ½”

3”

4”

5

8

10

12

14

16

INCHES

34

14

MEANWALLMM

MASSKG/3MLENGTH

PIPESIZE

21.34

26.67

33.40

42.16

48.26

60.33

73.03

88.90

114.30

141.30

168.28

219.08

273.05

323.85

355.60

406.40

15.76

20.96

26.64

35.08

40.94

52.48

62.68

77.92

102.26

128.20

154.08

202.74

254.51

303.23

333.40

381.00

2.79

2.86

3.38

3.54

3.66

3.93

5.18

5.49

6.02

6.55

7.10

8.17

9.27

10.31

11.10

12.70

0.77

1.02

1.50

2.03

2.42

3.24

5.11

6.70

9.53

12.29

16.80

25.29

35.85

47.40

53.10

69.44


AS/NZS 1477 - PVC Pipe and Fittings for pressure applications

PUMPSTotal Eden is ideally positioned to deliver quality pumps and pump sets to suit applications large and small. With over 20 years advising customers across Australia of the right solution for their pumping needs.

Whether it is in the commercial building services area, commercial swimming pools and resorts, water supply and waste water services, rainwater harvesting or industrial pumping applications, the Trade Direct Team at Total Eden are your ideal partner.

We understand the diversity of applications and work with all the major manufacturers to ensure the best possible solution for you and your clients. We invest in our people so you can be assured they have the expertise and skills to ensure we provide the right solution every time. Together with our ability to supply a wide range

of pipes and fittings, water treatment and filtration you have the ideal supplier for fully integrated and innovative water management systems.

• Jet Pumps• Horizontal Multi Stage Pumps• Vertical Multi Stage Pumps• ISO Spec Pumps• Submersible Pumps• Submersible Grinders & Cutters• Submersible Slurry Pumps• Circulation Pumps - Hot water

• Borehole Pumps• Solar Pumping Systems• Dosing Pumps• Pump Control Systems• Pump Sets• Sanitary Pumps• Transfer Pumps• In-line booster Pumps

For further information on our complete range of pumps, contact your Total Eden sales representative.


TABLES AND CONVERSIONSTABLES AND CONVERSIONSPUMPS

15

20

25

32

40

50

65

80

100

125

150

155

175

195

200

225

250

300

375

48.25

60.35

75.35

88.90

114.30

140.20

160.25

168.25

200.25

219.10

225.30

250.35

280.40

315.45

400.50

45.2

56.8

71.0

83.7

107.8

132.2

151.3

158.7

190.1

206.7

213.8

237.7

266.2

299.5

380.3

1.53

1.78

2.18

2.60

3.25

4.00

4.47

4.78

5.08

6.20

5.75

6.33

7.10

7.97

10.10

1.9

2.8

4.3

6.1

10.0

15.1

20.0

22.0

29.0

38.0

35.0

44.0

55.0

69.0

113.0

33.55

42.25

48.25

60.35

75.35

88.90

114.30

140.20

160.25

168.25

200.25

219.10

225.30

250.35

280.40

315.45

400.50

30.5

38.5

44.1

55.2

68.9

81.3

104.6

128.4

146.9

154.2

185.2

200.8

208.5

231.7

259.4

292.0

370.7

1.53

1.88

2.08

2.58

3.22

3.80

4.85

5.90

6.68

7.03

7.53

9.15

8.40

9.33

10.50

11.73

14.90

1.3

2.0

2.6

4.2

6.4

8.8

14.7

22.3

29.0

31.0

42.0

56.0

51.0

63.0

80.0

101.0

166.0

26.75

33.55

42.25

48.25

60.35

75.35

88.90

114.30

140.20

160.25

168.25

200.25

219.10

225.30

250.35

280.40

315.45

400.50

23.7

29.8

37.5

42.8

53.7

67.0

79.0

101.7

124.9

142.7

149.9

180.6

195.2

203.1

225.8

252.9

284.5

361.2

1.53

1.88

2.38

2.73

3.33

4.18

4.95

6.30

7.65

8.78

9.18

9.83

11.95

11.10

12.28

13.75

15.48

19.65

1.0

1.6

2.6

3.4

5.3

8.2

11.5

20.0

28.5

38.0

40.0

55.0

72.0

67.0

82.0

104.0

133.0

216.0

21.35

26.75

33.55

42.25

48.25

60.35

75.35

88.90

114.30

140.20

160.25

168.25

200.25

219.10

225.30

250.35

280.40

315.45

400.50

17.8

22.4

28.1

35.4

40.5

50.5

63.2

74.6

96.0

117.7

134.7

141.4

171.5

184.2

192.9

214.4

240.1

270.2

343.0

1.78

2.18

2.73

3.43

3.88

4.93

6.08

7.15

9.15

11.25

12.78

13.43

14.38

17.45

16.20

17.98

20.15

22.63

28.75

0.9

1.5

2.3

3.7

4.8

7.6

12.8

16.2

27.0

44.6

58.0

60.0

78.0

112.0

95.0

118.0

149.0

190.0

310.0

½”

”

”

”

”

”

”

”

”

”

”

”

1”

1 ”

1 ½”

2”

2 ½”

3”

4”

5

6

6

7

8

8

9

10

12

15

UPVC PRESSURE PIPE DIMENSIONS AS/NZS 1477 SERIES 1 - 6 METRE LENGTHS

PN6PIPESIZE

MEANBORE DI

MMMM INCHES

MEANODMM

34

14

PN9 PN12 PN18

MEANWALLMM

MASSKG/6MLENGTH

MEANBORE DI

MM

MEANODMM

MEANWALLMM

MASSKG/6MLENGTH

MEANBORE DI

MM

MEANODMM

MEANWALLMM

MASSKG/6MLENGTH

MEANBORE DI

MM

MEANODMM

MEANWALLMM

MASSKG/6MLENGTH

PVC SCHEDULE 80 PIPE DIMENSIONS CLEAR PVC SCHEDULE 40 PIPE DIMENSIONS

PIPESIZE

15

20

25

32

40

50

65

80

100

155

195

250

300

350

400

450

500

600

SCHEDULE 80 PIPEPIPESIZE

MEANBORE DI

MMMM

MEANODMM

½”

”

”

”

”

”

”

”

”

”

”

1”

1 ”

1 ½”

2”

2 ½”

3”

4”

6

8

10

12

14

16

18

20

24

INCHES

34

14

MEANWALLMM

MASSKG/5.8MLENGTH

PIPESIZE

21.34

26.67

33.40

42.16

48.26

60.33

73.03

88.90

114.30

168.28

219.08

273.05

323.85

355.60

406.40

457.20

508.00

609.60

13.84

18.88

24.30

32.50

38.14

49.22

58.98

73.66

97.18

146.34

193.68

242.98

289.00

317.50

363.58

406.76

452.48

544.02

3.75

3.90

4.55

4.83

5.06

5.56

7.03

7.62

8.56

10.97

12.70

15.04

17.43

19.05

21.41

25.22

27.76

32.79

1.85

2.51

3.69

5.10

6.19

8.56

12.35

17.49

25.56

46.22

74.14

109.92

151.24

181.41

233.25

291.83

357.11

506.63

15

20

25

32

40

50

65

80

100

125

155

195

250

300

350

400

CLEAR SCHEDULE 40 PIPEPIPESIZE

MEANBORE DI

MMMM

MEANODMM

½”

”

”

6”

”

”

”

”

”

1”

1 ”

1 ½”

2”

2 ½”

3”

4”

5

8

10

12

14

16

INCHES

34

14

MEANWALLMM

MASSKG/3MLENGTH

PIPESIZE

21.34

26.67

33.40

42.16

48.26

60.33

73.03

88.90

114.30

141.30

168.28

219.08

273.05

323.85

355.60

406.40

15.76

20.96

26.64

35.08

40.94

52.48

62.68

77.92

102.26

128.20

154.08

202.74

254.51

303.23

333.40

381.00

2.79

2.86

3.38

3.54

3.66

3.93

5.18

5.49

6.02

6.55

7.10

8.17

9.27

10.31

11.10

12.70

0.77

1.02

1.50

2.03

2.42

3.24

5.11

6.70

9.53

12.29

16.80

25.29

35.85

47.40

53.10

69.44


AS/NZS 1477 - PVC Pipe and Fittings for pressure applications


TABLES AND CONVERSIONS

32

40

50

65

80

100

150

225

300

375

35.8

43.0

56.0

69.0

82.0

160.0

250.0

315.0

400.0

32.0

39.0

51.6

63.6

76.2

151.6

236.8

298.2

378.8

1.9

2.0

2.2

2.7

2.9

4.2

6.6

8.4

10.6

1.95

2.45

3.53

5.34

6.9

18.10

42.69

70.90

MMMEAN

BORE DIMM

MEANODMM

MEANWALLMM

MASSKG/6MLENGTH

MEANBORE DI

MM

MEANODMM

MEANWALLMM

MASSKG/6MLENGTH

MEANBORE DI

MM

MEANODMM

MEANWALLMM

MASSKG/6MLENGTH

MEANBORE DI

MM

MEANODMM

MEANWALLMM

MASSKG/6MLENGTH

110.0 104.0 3.0 9.52

160.0

250.0

315.0

400.0

149.6

233.6

296.6

373.6

5.2

8.2

9.2

13.2

55.10

88.20

110.0 102.2 3.9

AS1260 - PVC-U pipes and fittings for drain, waste and vent applications

75

90

90 SLOTTED

150

175

225

300

375

MEANBORE DI

MMMM

MEANODMM

MEANWALLMM

MASSKG/6MLENGTH

75

90

90

160

200

250

315

400

71.8

86.2

86.2

153.6

192.8

239.0

303.0

384.2

1.6

1.9

1.9

3.2

3.6

5.5

6.0

7.9

3.40

4.70

4.70

14.40

15.99

33.74

56.90

86.40

UPVC STORMWATER PIPE DIMENSIONS AS/NZS 1254


AS/NZS 1254 - PVC-u Pipe and Fittings for storm water and surface water applications

UPVC DWV PIPE DIMENSIONS AS1260

SN4 / SHPIPESIZE SN6 SN8/SEH SN10

6 METRE STORMWATER PIPEPIPESIZE

STANDARD DIMENSION RATIOS [SDR] FOR SERIES 1 METRIC PE PIPES - AS/NZS4130

MATERIAL PRESSURE

PE80 /SDR:

PE100 /SDR:

PN3.2

41

PN4

33

41

PN6.3

21

26

PN8

17

21

PN10

13.6

17

PN12.5

11

13.6

PN16

9

11

PN20

7.4

9

PN25

7.4

AS/NZS4130 - General Pressure Pipe, Straight Lengths. OD/Wall = SDR.

PE METRIC PIPE - AS/NZS 4130

MMMEAN

BORE DIMM

MEANODMM

MEANWALLMM

MASSKG/6MLENGTH

MEANBORE DI

MM

MEANODMM

MEANWALLMM

MASSKG/6MLENGTH

MEANBORE DI

MM

MEANODMM

MEANWALLMM

MASSKG/6MLENGTH

MEANBORE DI

MM

MEANODMM

MEANWALLMM

MASSKG/6MLENGTH

PIPE

SIZE

PE100 PN8 / PE80 PN6.3

SDR 21

PE100 PN10 / PE80 PN8

SDR 17

PE100 PN12.5 / PE80 PN10

SDR 13.6

PE100 PN16 / PE80 PN12.5

SDR 11

16

20

25

32

40

50

63

75

90

110

125

140

160

180

200

225

250

280

315

355

400

450

500

32.00

40.00

50.00

63.00

75.00

90.00

110.00

125.00

140.00

160.00

180.00

200.00

225.00

250.00

280.00

315.00

355.00

400.00

450.00

500.00

28.80

36.20

45.20

57.00

67.80

81.40

99.40

113.00

126.60

144.60

162.80

180.80

203.40

226.20

253.20

285.00

321.20

361.80

407.00

452.20

1.60

1.90

2.40

3.00

3.60

4.30

5.30

6.00

6.70

7.70

8.60

9.60

10.80

11.90

13.40

15.00

16.90

19.10

21.50

23.90

0.88

1.31

2.07

3.26

4.65

6.67

10.04

12.92

16.16

21.22

26.68

33.08

41.86

51.27

64.64

81.43

103.40

131.65

166.71

205.91

25.00

32.00

40.00

50.00

63.00

75.00

90.00

110.00

125.00

140.00

160.00

180.00

200.00

225.00

250.00

280.00

315.00

355.00

400.00

450.00

500.00

21.80

28.20

35.20

44.00

55.40

66.00

79.20

96.80

110.20

123.40

141.00

158.60

176.20

198.20

220.40

246.80

277.60

312.80

352.60

396.60

440.80

1.60

1.90

2.40

3.00

3.80

4.50

5.40

6.60

7.40

8.30

9.50

10.70

11.90

13.40

14.80

16.60

18.70

21.10

23.70

26.70

29.60

0.68

1.04

1.63

2.55

4.07

5.74

8.27

12.35

15.75

19.78

25.87

32.78

40.51

51.31

62.99

79.12

100.27

127.49

161.38

204.52

251.96

20.00

25.00

32.00

40.00

50.00

63.00

75.00

90.00

110.00

125.00

140.00

160.00

180.00

200.00

225.00

250.00

280.00

315.00

355.00

400.00

450.00

500.00

16.80

21.20

27.20

34.00

42.60

53.60

64.00

76.80

93.80

106.60

119.40

136.40

153.40

170.60

191.80

213.20

238.80

268.60

302.80

341.20

383.80

426.40

1.60

1.90

2.40

3.00

3.70

4.70

5.50

6.60

8.10

9.20

10.30

11.80

13.30

14.70

16.60

18.40

20.60

23.20

26.10

29.40

33.10

36.80

0.53

0.79

1.28

2.01

3.10

4.96

6.92

9.96

14.93

19.28

24.17

5.27

40.12

49.29

62.60

77.11

96.70

122.50

155.34

197.17

249.71

308.45

16.00

20.00

25.00

32.00

40.00

50.00

63.00

75.00

90.00

110.00

125.00

140.00

160.00

180.00

200.00

225.00

250.00

280.00

315.00

355.00

400.00

450.00

500.00

12.80

16.20

20.40

26.20

32.60

40.80

51.40

61.40

73.60

90.00

102.20

114.60

130.80

147.20

163.60

184.00

204.60

229.20

257.80

290.60

327.40

368.20

409.20

1.60

1.90

2.30

2.90

3.70

4.60

5.80

6.80

8.20

10.00

11.40

12.70

14.60

16.40

18.20

20.50

22.70

25.40

28.60

32.20

36.30

40.90

45.40

0.45

0.62

0.95

1.53

2.43

3.78

6.01

8.39

12.14

18.10

23.44

29.26

38.41

48.55

59.87

75.86

93.37

117.02

148.22

188.09

238.90

302.78

373.47

RURAL POLY PIPE DIMENSIONS: RURAL - AS2698.2 (CLASS B), IMPERIAL - CLASS C & D (ASK119)

12.7

19.0

25.4

31.6

38.0

50.8

PIPESIZE

CLASS D - 1200 kPa (173 PSI)(NO LONGER MANUFACTURED)

CLASS C - 900 kPa (130 PSI)(NO LONGER MANUFACTURED)

RURAL B - 600 kPa (87 PSI)

BORE MM WALL THICKNESS MMNOMINAL

½”

”

1”

1 ”

1 ½”

2”

34

14

BORE MM WALL THICKNESS MM BORE MM WALL THICKNESS MM

1.7

1.7

1.7

2.1

2.5

3.4

12.7

19.0

25.4

31.6

38.0

50.8

1.7

1.9

2.6

3.3

3.9

5.2

12.7

19.0

25.4

31.6

38.0

50.8

1.8

2.7

3.5

4.4

5.3

7.1



TABLES AND CONVERSIONSTABLES AND CONVERSIONS

32

40

50

65

80

100

150

225

300

375

35.8

43.0

56.0

69.0

82.0

160.0

250.0

315.0

400.0

32.0

39.0

51.6

63.6

76.2

151.6

236.8

298.2

378.8

1.9

2.0

2.2

2.7

2.9

4.2

6.6

8.4

10.6

1.95

2.45

3.53

5.34

6.9

18.10

42.69

70.90

MMMEAN

BORE DIMM

MEANODMM

MEANWALLMM

MASSKG/6MLENGTH

MEANBORE DI

MM

MEANODMM

MEANWALLMM

MASSKG/6MLENGTH

MEANBORE DI

MM

MEANODMM

MEANWALLMM

MASSKG/6MLENGTH

MEANBORE DI

MM

MEANODMM

MEANWALLMM

MASSKG/6MLENGTH

110.0 104.0 3.0 9.52

160.0

250.0

315.0

400.0

149.6

233.6

296.6

373.6

5.2

8.2

9.2

13.2

55.10

88.20

110.0 102.2 3.9

AS1260 - PVC-U pipes and fittings for drain, waste and vent applications

75

90

90 SLOTTED

150

175

225

300

375

MEANBORE DI

MMMM

MEANODMM

MEANWALLMM

MASSKG/6MLENGTH

75

90

90

160

200

250

315

400

71.8

86.2

86.2

153.6

192.8

239.0

303.0

384.2

1.6

1.9

1.9

3.2

3.6

5.5

6.0

7.9

3.40

4.70

4.70

14.40

15.99

33.74

56.90

86.40

UPVC STORMWATER PIPE DIMENSIONS AS/NZS 1254


AS/NZS 1254 - PVC-u Pipe and Fittings for storm water and surface water applications

UPVC DWV PIPE DIMENSIONS AS1260

SN4 / SHPIPESIZE SN6 SN8/SEH SN10

6 METRE STORMWATER PIPEPIPESIZE

STANDARD DIMENSION RATIOS [SDR] FOR SERIES 1 METRIC PE PIPES - AS/NZS4130

MATERIAL PRESSURE

PE80 /SDR:

PE100 /SDR:

PN3.2

41

PN4

33

41

PN6.3

21

26

PN8

17

21

PN10

13.6

17

PN12.5

11

13.6

PN16

9

11

PN20

7.4

9

PN25

7.4

AS/NZS4130 - General Pressure Pipe, Straight Lengths. OD/Wall = SDR.

PE METRIC PIPE - AS/NZS 4130

MMMEAN

BORE DIMM

MEANODMM

MEANWALLMM

MASSKG/6MLENGTH

MEANBORE DI

MM

MEANODMM

MEANWALLMM

MASSKG/6MLENGTH

MEANBORE DI

MM

MEANODMM

MEANWALLMM

MASSKG/6MLENGTH

MEANBORE DI

MM

MEANODMM

MEANWALLMM

MASSKG/6MLENGTH

PIPE

SIZE

PE100 PN8 / PE80 PN6.3

SDR 21

PE100 PN10 / PE80 PN8

SDR 17

PE100 PN12.5 / PE80 PN10

SDR 13.6

PE100 PN16 / PE80 PN12.5

SDR 11

16

20

25

32

40

50

63

75

90

110

125

140

160

180

200

225

250

280

315

355

400

450

500

32.00

40.00

50.00

63.00

75.00

90.00

110.00

125.00

140.00

160.00

180.00

200.00

225.00

250.00

280.00

315.00

355.00

400.00

450.00

500.00

28.80

36.20

45.20

57.00

67.80

81.40

99.40

113.00

126.60

144.60

162.80

180.80

203.40

226.20

253.20

285.00

321.20

361.80

407.00

452.20

1.60

1.90

2.40

3.00

3.60

4.30

5.30

6.00

6.70

7.70

8.60

9.60

10.80

11.90

13.40

15.00

16.90

19.10

21.50

23.90

0.88

1.31

2.07

3.26

4.65

6.67

10.04

12.92

16.16

21.22

26.68

33.08

41.86

51.27

64.64

81.43

103.40

131.65

166.71

205.91

25.00

32.00

40.00

50.00

63.00

75.00

90.00

110.00

125.00

140.00

160.00

180.00

200.00

225.00

250.00

280.00

315.00

355.00

400.00

450.00

500.00

21.80

28.20

35.20

44.00

55.40

66.00

79.20

96.80

110.20

123.40

141.00

158.60

176.20

198.20

220.40

246.80

277.60

312.80

352.60

396.60

440.80

1.60

1.90

2.40

3.00

3.80

4.50

5.40

6.60

7.40

8.30

9.50

10.70

11.90

13.40

14.80

16.60

18.70

21.10

23.70

26.70

29.60

0.68

1.04

1.63

2.55

4.07

5.74

8.27

12.35

15.75

19.78

25.87

32.78

40.51

51.31

62.99

79.12

100.27

127.49

161.38

204.52

251.96

20.00

25.00

32.00

40.00

50.00

63.00

75.00

90.00

110.00

125.00

140.00

160.00

180.00

200.00

225.00

250.00

280.00

315.00

355.00

400.00

450.00

500.00

16.80

21.20

27.20

34.00

42.60

53.60

64.00

76.80

93.80

106.60

119.40

136.40

153.40

170.60

191.80

213.20

238.80

268.60

302.80

341.20

383.80

426.40

1.60

1.90

2.40

3.00

3.70

4.70

5.50

6.60

8.10

9.20

10.30

11.80

13.30

14.70

16.60

18.40

20.60

23.20

26.10

29.40

33.10

36.80

0.53

0.79

1.28

2.01

3.10

4.96

6.92

9.96

14.93

19.28

24.17

5.27

40.12

49.29

62.60

77.11

96.70

122.50

155.34

197.17

249.71

308.45

16.00

20.00

25.00

32.00

40.00

50.00

63.00

75.00

90.00

110.00

125.00

140.00

160.00

180.00

200.00

225.00

250.00

280.00

315.00

355.00

400.00

450.00

500.00

12.80

16.20

20.40

26.20

32.60

40.80

51.40

61.40

73.60

90.00

102.20

114.60

130.80

147.20

163.60

184.00

204.60

229.20

257.80

290.60

327.40

368.20

409.20

1.60

1.90

2.30

2.90

3.70

4.60

5.80

6.80

8.20

10.00

11.40

12.70

14.60

16.40

18.20

20.50

22.70

25.40

28.60

32.20

36.30

40.90

45.40

0.45

0.62

0.95

1.53

2.43

3.78

6.01

8.39

12.14

18.10

23.44

29.26

38.41

48.55

59.87

75.86

93.37

117.02

148.22

188.09

238.90

302.78

373.47

RURAL POLY PIPE DIMENSIONS: RURAL - AS2698.2 (CLASS B), IMPERIAL - CLASS C & D (ASK119)

12.7

19.0

25.4

31.6

38.0

50.8

PIPESIZE

CLASS D - 1200 kPa (173 PSI)(NO LONGER MANUFACTURED)

CLASS C - 900 kPa (130 PSI)(NO LONGER MANUFACTURED)

RURAL B - 600 kPa (87 PSI)

BORE MM WALL THICKNESS MMNOMINAL

½”

”

1”

1 ”

1 ½”

2”

34

14

BORE MM WALL THICKNESS MM BORE MM WALL THICKNESS MM

1.7

1.7

1.7

2.1

2.5

3.4

12.7

19.0

25.4

31.6

38.0

50.8

1.7

1.9

2.6

3.3

3.9

5.2

12.7

19.0

25.4

31.6

38.0

50.8

1.8

2.7

3.5

4.4

5.3

7.1




PIP

E MA

TERIA

LA

BBREV

IATIO

NSTA

ND

ARD

DES

IGN

ATIO

N50

65

80

PRESSURE PIPE

Iron

DIC

L

AS/N

ZS 2280

Class K

9 or K

12

--

96

ISO 2531/ B

S EN

545

--

98

SteelM

SCL

GW

I

AS 1579

6mm

Wall Th

ickness

--

-

AS 1074

6076

89

Polyvin

yl Ch

lorid

eU

PV

C

MP

VC

OP

VC

AS/N

ZS 1477

AS/N

ZS 4765

AS/N

ZS 4441

Series 1 (Wh

ite)

Series 2 (Blu

e)

60-

75-

89-

Polyeth

ylene

PE 80B

or P

E 100A

S/NZ

S 4130C

lass PN

12.5 or P

N 16

63-

90

Acro

nitrile B

utad

iene

Styrene

AB

SB

S 5391 Part 1C

lass C, E, T

6075

89

Glass R

einfo

rced P

lasticG

RP

AS 3571

SN 5000 o

r SN 10000

--

-

Co

pp

erC

UA

S 1432Typ

e A o

r B51

6476

Grey C

ast Iron

CIC

L

AS 1724

AS 2544

Class B

Class C

--

-

--

96

Asb

estos C

emen

tA

CA

S 1711C

lass AB

Class C

D

--

96

--

96

Rein

forced

Co

ncrete

RC

AS 4058

Class 2,3 o

r 4-

--

NON PRESSURE PIPE

Grey C

ast Iron

Soil P

ipe

AS 1631

EN 877

--

86

--

83

PV

CSW

VA

S/NZ

S 126056

6983

Pu

trified C

layV

CA

S 1741-

--

Fibre R

einfo

rced C

emen

tFR

CC

lass X-

--

Asb

estos C

emen

tA

CA

S 1741

Class 35

Class 50

--

-

--

-

PIP

E OU

TSID

E DIA

METER

- NO

MIN

AL S

IZE

100

125

150

175

200

225

250

300

350

375

400

450

500

525

600

675

750

122-

177-

232259

286345

-426

-507

560-

667-

826

118-

170-

222-

274326

378-

429480

532-

635-

-

114-

168-

219257

273324

356406

457508

559-

660-

813

114140

165-

--

--

--

--

--

--

-

114

122

140-

160

177

200-

225

232

250

259

280

286

315

345

355-

400

426

450-

500

507

560

560

--

630

667

--

--

110/

125160

180-

250280

315355

-450

--

--

--

-

114140

168-

219-

--

--

--

--

--

-

122-

177-

232259

28634

53 99

426453

507560

587667

747826

102127

152-

203229

--

--

--

--

--

-

122-

177-

232259

286334

-413

-492

545-

650-

-

122-

177-

232259

286345

-426

-507

560-

667-

-

122-

177-

232259

286334

-413

-492

-572

650-

-

122-

177-

232259

286345

-426

-507

-587

667747

826

--

197-

-279

-362

-445

-533

-616

699787

870

112140

165-

-244

-325

--

--

--

--

-

110135

160-

210-

274326

--

429-

532-

635-

-

110-

160-

-250

-315

-400

--

--

--

-

138-

194-

-280

-370

-450

485535

-635

710-

-

124-

179-

261-

-245

-426

-510

-594

679-

-

120

-1 77

-230

257283

336-

419-

497-

576657

--

122-

183-

236262

289344

-425

-505

-585

664-

-

PIP

E SIZ

E DIM

ENSIO

NA

L DA

TA


MMMEAN

BORE DIMM

MEANODMM

MEANWALLMM

MASSKG/5MLENGTH

MEANBORE DI

MM

MEANODMM

MEANWALLMM

MASSKG/3MLENGTH

MEANBORE DI

MM

MEANODMM

MEANWALLMM

MASSKG/4MLENGTH

MEANBORE DI

MM

MEANODMM

MEANWALLMM

MASSKG/4MLENGTH

MEANBORE DI

MM

MEANODMM

MEANWALLMM

MASSKG/4.5MLENGTH

UPVC ELECTRICAL CONDUIT DIMENSIONS (SOLID WALL - SOLVENT WELD - AS 2053)

SPECIALISED PIPING SYSTEMS DIMENSIONS

PIPE

SIZEVALSIR HDPE SILERE

WEFATHERM COLD

WATER PIPE PN10

WEFATHERM HOT

WATER PIPE PN20 BLAZEMASTER CPVC

HDPE DRAINAGE SYSTEM - PIPE EQUIVALENCE TABLE

25

32

40

50

56

58

63

65

75

78

90

110

125

160

200

250

315

200

250

315

SDR33

SDR33

SDR33

SDR26

SDR26

SDR26

-

32

40

50

56

-

63

-

75

-

90

110

125

160

200

250

315

200

250

315

-

26

34

44

50

-

57

-

69

-

83

101.4

115.2

147.6

187.6

234.6

295.6

184.6

230.8

290.8

-

3

3

3

3

-

3

-

3

-

3.5

4.3

4.9

6.2

6.2

7.7

9.7

7.7

9.6

12.1

-

1.53

1.85

2.3

2.65

-

2.98

-

3.7

-

4.9

7.25

9.3

15.4

20.5

30.5

47.55

25.62

38.12

57.06

-

-

-

-

-

58

-

-

-

78

-

110

-

160

-

-

-

-

-

-

-

-

-

-

-

50

-

-

-

68.8

-

98.8

-

148.8

-

-

-

-

-

-

-

-

-

-

-

4.2

-

-

-

4.6

-

5.6

-

5.6

-

-

-

-

-

-

-

-

-

-

-

10.32

-

-

-

18.3

-

30.6

-

45

-

-

-

-

-

-

25

32

40

50

-

-

63

-

75

-

90

110

125

-

-

-

-

-

-

-

20.4

26.2

32.6

40.8

-

-

51.4

-

61.4

-

73.6

90

102.2

-

-

-

-

-

-

-

2.3

2.9

3.7

4.6

-

-

5.8

-

6.8

-

8.2

10

11.4

-

-

-

-

-

-

-

0.668

1.07

1.68

2.55

-

-

4.04

-

5.68

-

8.12

12.04

15.6

-

-

-

-

-

-

-

25

32

40

50

-

-

63

-

75

-

90

110

125

-

-

-

-

-

-

-

16.6

21.2

26.6

33.4

-

-

42

-

50

-

60

73.4

83.4

-

-

-

-

-

-

-

4.2

5.4

6.7

8.3

-

-

10.5

-

12.5

-

15

18.3

20.8

-

-

-

-

-

-

-

1

1.64

2.54

3.98

-

-

6.28

-

8.92

-

13.44

20.16

25.88

-

-

-

-

-

-

-

33.4

42.16

48.26

60.33

-

-

-

73.03

-

-

-

-

-

-

-

-

-

-

-

-

24.3

32.5

38.14

49.22

-

-

-

58.98

-

-

-

-

-

-

-

-

-

-

-

-

4.55

4.83

5.06

5.56

-

-

-

7.03

-

-

-

-

-

-

-

-

-

-

-

-

2.86

3.96

4.8

6.64

-

-

-

9.45

-

-

-

-

-

-

-

-

-

-

-

-

HDPE DWV COPPER

50 MM

56

75

90

110

160

MM

MM

MM

MM

MM

40 MM

50

65

80

100

150

MM

MM

MM

MM

MM

40 MM

50

65

80

100

MM

MM

MM

MM

HEAVY DUTY ORANGE CONDUITPIPE SIZE

MEAN ODMM

20

25

32

40

50

63

80

100

125

150

MEDIUM DUTY GREY CONDUIT

MEAN BOREDI. MM

MEAN WALLMM

MEAN ODMM

MEAN BOREDI. MM

MEAN WALLMM

MM

19.85

24.85

31.85

39.85

49.85

62.85

88.90

114.30

140.20

160.30

16.05

21.05

27.45

35.45

45.45

58.45

84.50

109.90

135.80

155.90

1.90

1.90

2.20

2.20

2.20

2.20

2.20

2.20

2.20

2.20

19.85

24.85

31.85

39.85

49.85

62.85

88.90

114.30

140.20

160.30

15.05

19.65

26.25

33.45

42.85

54.85

79.30

102.30

125.40

143.30

2.40

2.60

2.80

3.20

3.50

4.00

4.80

6.00

7.40

8.50


MMMEAN

BORE DIMM

MEANODMM

MEANWALLMM

MASSKG/5MLENGTH

MEANBORE DI

MM

MEANODMM

MEANWALLMM

MASSKG/3MLENGTH

MEANBORE DI

MM

MEANODMM

MEANWALLMM

MASSKG/4MLENGTH

MEANBORE DI

MM

MEANODMM

MEANWALLMM

MASSKG/4MLENGTH

MEANBORE DI

MM

MEANODMM

MEANWALLMM

MASSKG/4.5MLENGTH



PIPE


WEFATHERM COLD

WATER PIPE PN10

WEFATHERM HOT



25

32

40

50

56

58

63

65

75

78

90

110

125

160

200

250

315

200

250

315

SDR33

SDR33

SDR33

SDR26

SDR26

SDR26

-

32

40

50

56

-

63

-

75

-

90

110

125

160

200

250

315

200

250

315

-

26

34

44

50

-

57

-

69

-

83

101.4

115.2

147.6

187.6

234.6

295.6

184.6

230.8

290.8

-

3

3

3

3

-

3

-

3

-

3.5

4.3

4.9

6.2

6.2

7.7

9.7

7.7

9.6

12.1

-

1.53

1.85

2.3

2.65

-

2.98

-

3.7

-

4.9

7.25

9.3

15.4

20.5

30.5

47.55

25.62

38.12

57.06

-

-

-

-

-

58

-

-

-

78

-

110

-

160

-

-

-

-

-

-

-

-

-

-

-

50

-

-

-

68.8

-

98.8

-

148.8

-

-

-

-

-

-

-

-

-

-

-

4.2

-

-

-

4.6

-

5.6

-

5.6

-

-

-

-

-

-

-

-

-

-

-

10.32

-

-

-

18.3

-

30.6

-

45

-

-

-

-

-

-

25

32

40

50

-

-

63

-

75

-

90

110

125

-

-

-

-

-

-

-

20.4

26.2

32.6

40.8

-

-

51.4

-

61.4

-

73.6

90

102.2

-

-

-

-

-

-

-

2.3

2.9

3.7

4.6

-

-

5.8

-

6.8

-

8.2

10

11.4

-

-

-

-

-

-

-

0.668

1.07

1.68

2.55

-

-

4.04

-

5.68

-

8.12

12.04

15.6

-

-

-

-

-

-

-

25

32

40

50

-

-

63

-

75

-

90

110

125

-

-

-

-

-

-

-

16.6

21.2

26.6

33.4

-

-

42

-

50

-

60

73.4

83.4

-

-

-

-

-

-

-

4.2

5.4

6.7

8.3

-

-

10.5

-

12.5

-

15

18.3

20.8

-

-

-

-

-

-

-

1

1.64

2.54

3.98

-

-

6.28

-

8.92

-

13.44

20.16

25.88

-

-

-

-

-

-

-

33.4

42.16

48.26

60.33

-

-

-

73.03

-

-

-

-

-

-

-

-

-

-

-

-

24.3

32.5

38.14

49.22

-

-

-

58.98

-

-

-

-

-

-

-

-

-

-

-

-

4.55

4.83

5.06

5.56

-

-

-

7.03

-

-

-

-

-

-

-

-

-

-

-

-

2.86

3.96

4.8

6.64

-

-

-

9.45

-

-

-

-

-

-

-

-

-

-

-

-

HDPE DWV COPPER

50 MM

56

75

90

110

160

MM

MM

MM

MM

MM

40 MM

50

65

80

100

150

MM

MM

MM

MM

MM

40 MM

50

65

80

100

MM

MM

MM

MM


MEAN ODMM

20

25

32

40

50

63

80

100

125

150


MEAN BOREDI. MM

MEAN WALLMM

MEAN ODMM

MEAN BOREDI. MM

MEAN WALLMM

MM

19.85

24.85

31.85

39.85

49.85

62.85

88.90

114.30

140.20

160.30

16.05

21.05

27.45

35.45

45.45

58.45

84.50

109.90

135.80

155.90

1.90

1.90

2.20

2.20

2.20

2.20

2.20

2.20

2.20

2.20

19.85

24.85

31.85

39.85

49.85

62.85

88.90

114.30

140.20

160.30

15.05

19.65

26.25

33.45

42.85

54.85

79.30

102.30

125.40

143.30

2.40

2.60

2.80

3.20

3.50

4.00

4.80

6.00

7.40

8.50


MMMEAN

BORE DIMM

MEANODMM

MEANWALLMM

MASSKG/5MLENGTH

MEANBORE DI

MM

MEANODMM

MEANWALLMM

MASSKG/3MLENGTH

MEANBORE DI

MM

MEANODMM

MEANWALLMM

MASSKG/4MLENGTH

MEANBORE DI

MM

MEANODMM

MEANWALLMM

MASSKG/4MLENGTH

MEANBORE DI

MM

MEANODMM

MEANWALLMM

MASSKG/4.5MLENGTH



PIPE


WEFATHERM COLD

WATER PIPE PN10

WEFATHERM HOT



25

32

40

50

56

58

63

65

75

78

90

110

125

160

200

250

315

200

250

315

SDR33

SDR33

SDR33

SDR26

SDR26

SDR26

-

32

40

50

56

-

63

-

75

-

90

110

125

160

200

250

315

200

250

315

-

26

34

44

50

-

57

-

69

-

83

101.4

115.2

147.6

187.6

234.6

295.6

184.6

230.8

290.8

-

3

3

3

3

-

3

-

3

-

3.5

4.3

4.9

6.2

6.2

7.7

9.7

7.7

9.6

12.1

-

1.53

1.85

2.3

2.65

-

2.98

-

3.7

-

4.9

7.25

9.3

15.4

20.5

30.5

47.55

25.62

38.12

57.06

-

-

-

-

-

58

-

-

-

78

-

110

-

160

-

-

-

-

-

-

-

-

-

-

-

50

-

-

-

68.8

-

98.8

-

148.8

-

-

-

-

-

-

-

-

-

-

-

4.2

-

-

-

4.6

-

5.6

-

5.6

-

-

-

-

-

-

-

-

-

-

-

10.32

-

-

-

18.3

-

30.6

-

45

-

-

-

-

-

-

25

32

40

50

-

-

63

-

75

-

90

110

125

-

-

-

-

-

-

-

20.4

26.2

32.6

40.8

-

-

51.4

-

61.4

-

73.6

90

102.2

-

-

-

-

-

-

-

2.3

2.9

3.7

4.6

-

-

5.8

-

6.8

-

8.2

10

11.4

-

-

-

-

-

-

-

0.668

1.07

1.68

2.55

-

-

4.04

-

5.68

-

8.12

12.04

15.6

-

-

-

-

-

-

-

25

32

40

50

-

-

63

-

75

-

90

110

125

-

-

-

-

-

-

-

16.6

21.2

26.6

33.4

-

-

42

-

50

-

60

73.4

83.4

-

-

-

-

-

-

-

4.2

5.4

6.7

8.3

-

-

10.5

-

12.5

-

15

18.3

20.8

-

-

-

-

-

-

-

1

1.64

2.54

3.98

-

-

6.28

-

8.92

-

13.44

20.16

25.88

-

-

-

-

-

-

-

33.4

42.16

48.26

60.33

-

-

-

73.03

-

-

-

-

-

-

-

-

-

-

-

-

24.3

32.5

38.14

49.22

-

-

-

58.98

-

-

-

-

-

-

-

-

-

-

-

-

4.55

4.83

5.06

5.56

-

-

-

7.03

-

-

-

-

-

-

-

-

-

-

-

-

2.86

3.96

4.8

6.64

-

-

-

9.45

-

-

-

-

-

-

-

-

-

-

-

-

HDPE DWV COPPER

50 MM

56

75

90

110

160

MM

MM

MM

MM

MM

40 MM

50

65

80

100

150

MM

MM

MM

MM

MM

40 MM

50

65

80

100

MM

MM

MM

MM


MEAN ODMM

20

25

32

40

50

63

80

100

125

150


MEAN BOREDI. MM

MEAN WALLMM

MEAN ODMM

MEAN BOREDI. MM

MEAN WALLMM

MM

19.85

24.85

31.85

39.85

49.85

62.85

88.90

114.30

140.20

160.30

16.05

21.05

27.45

35.45

45.45

58.45

84.50

109.90

135.80

155.90

1.90

1.90

2.20

2.20

2.20

2.20

2.20

2.20

2.20

2.20

19.85

24.85

31.85

39.85

49.85

62.85

88.90

114.30

140.20

160.30

15.05

19.65

26.25

33.45

42.85

54.85

79.30

102.30

125.40

143.30

2.40

2.60

2.80

3.20

3.50

4.00

4.80

6.00

7.40

8.50


MMMEAN

BORE DIMM

MEANODMM

MEANWALLMM

MASSKG/5MLENGTH

MEANBORE DI

MM

MEANODMM

MEANWALLMM

MASSKG/3MLENGTH

MEANBORE DI

MM

MEANODMM

MEANWALLMM

MASSKG/4MLENGTH

MEANBORE DI

MM

MEANODMM

MEANWALLMM

MASSKG/4MLENGTH

MEANBORE DI

MM

MEANODMM

MEANWALLMM

MASSKG/4.5MLENGTH



PIPE


WEFATHERM COLD

WATER PIPE PN10

WEFATHERM HOT



25

32

40

50

56

58

63

65

75

78

90

110

125

160

200

250

315

200

250

315

SDR33

SDR33

SDR33

SDR26

SDR26

SDR26

-

32

40

50

56

-

63

-

75

-

90

110

125

160

200

250

315

200

250

315

-

26

34

44

50

-

57

-

69

-

83

101.4

115.2

147.6

187.6

234.6

295.6

184.6

230.8

290.8

-

3

3

3

3

-

3

-

3

-

3.5

4.3

4.9

6.2

6.2

7.7

9.7

7.7

9.6

12.1

-

1.53

1.85

2.3

2.65

-

2.98

-

3.7

-

4.9

7.25

9.3

15.4

20.5

30.5

47.55

25.62

38.12

57.06

-

-

-

-

-

58

-

-

-

78

-

110

-

160

-

-

-

-

-

-

-

-

-

-

-

50

-

-

-

68.8

-

98.8

-

148.8

-

-

-

-

-

-

-

-

-

-

-

4.2

-

-

-

4.6

-

5.6

-

5.6

-

-

-

-

-

-

-

-

-

-

-

10.32

-

-

-

18.3

-

30.6

-

45

-

-

-

-

-

-

25

32

40

50

-

-

63

-

75

-

90

110

125

-

-

-

-

-

-

-

20.4

26.2

32.6

40.8

-

-

51.4

-

61.4

-

73.6

90

102.2

-

-

-

-

-

-

-

2.3

2.9

3.7

4.6

-

-

5.8

-

6.8

-

8.2

10

11.4

-

-

-

-

-

-

-

0.668

1.07

1.68

2.55

-

-

4.04

-

5.68

-

8.12

12.04

15.6

-

-

-

-

-

-

-

25

32

40

50

-

-

63

-

75

-

90

110

125

-

-

-

-

-

-

-

16.6

21.2

26.6

33.4

-

-

42

-

50

-

60

73.4

83.4

-

-

-

-

-

-

-

4.2

5.4

6.7

8.3

-

-

10.5

-

12.5

-

15

18.3

20.8

-

-

-

-

-

-

-

1

1.64

2.54

3.98

-

-

6.28

-

8.92

-

13.44

20.16

25.88

-

-

-

-

-

-

-

33.4

42.16

48.26

60.33

-

-

-

73.03

-

-

-

-

-

-

-

-

-

-

-

-

24.3

32.5

38.14

49.22

-

-

-

58.98

-

-

-

-

-

-

-

-

-

-

-

-

4.55

4.83

5.06

5.56

-

-

-

7.03

-

-

-

-

-

-

-

-

-

-

-

-

2.86

3.96

4.8

6.64

-

-

-

9.45

-

-

-

-

-

-

-

-

-

-

-

-

HDPE DWV COPPER

50 MM

56

75

90

110

160

MM

MM

MM

MM

MM

40 MM

50

65

80

100

150

MM

MM

MM

MM

MM

40 MM

50

65

80

100

MM

MM

MM

MM


MEAN ODMM

20

25

32

40

50

63

80

100

125

150


MEAN BOREDI. MM

MEAN WALLMM

MEAN ODMM

MEAN BOREDI. MM

MEAN WALLMM

MM

19.85

24.85

31.85

39.85

49.85

62.85

88.90

114.30

140.20

160.30

16.05

21.05

27.45

35.45

45.45

58.45

84.50

109.90

135.80

155.90

1.90

1.90

2.20

2.20

2.20

2.20

2.20

2.20

2.20

2.20

19.85

24.85

31.85

39.85

49.85

62.85

88.90

114.30

140.20

160.30

15.05

19.65

26.25

33.45

42.85

54.85

79.30

102.30

125.40

143.30

2.40

2.60

2.80

3.20

3.50

4.00

4.80

6.00

7.40

8.50


TRIPLUS

EXTERNAL DIAMETER MM

WALL THCKNESS MM

- -

- -

40 1.8

50 1.8

- -

- -

- -

- -

75 2.6

- -

- -

110 3.4

- -

160 4.9

- -

- -

- -

- -

- -

- -



PIP

E MA

TERIA

LA

BBREV

IATIO

NSTA

ND

ARD

DES

IGN

ATIO

N50

65

80

PRESSURE PIPE

Iron

DIC

L

AS/N

ZS 2280

Class K

9 or K

12

--

96

ISO 2531/ B

S EN

545

--

98

SteelM

SCL

GW

I

AS 1579

6mm

Wall Th

ickness

--

-

AS 1074

6076

89

Polyvin

yl Ch

lorid

eU

PV

C

MP

VC

OP

VC

AS/N

ZS 1477

AS/N

ZS 4765

AS/N

ZS 4441

Series 1 (Wh

ite)

Series 2 (Blu

e)

60-

75-

89-

Polyeth

ylene

PE 80B

or P

E 100A

S/NZ

S 4130C

lass PN

12.5 or P

N 16

63-

90

Acro

nitrile B

utad

iene

Styrene

AB

SB

S 5391 Part 1C

lass C, E, T

6075

89

Glass R

einfo

rced P

lasticG

RP

AS 3571

SN 5000 o

r SN 10000

--

-

Co

pp

erC

UA

S 1432Typ

e A o

r B51

6476

Grey C

ast Iron

CIC

L

AS 1724

AS 2544

Class B

Class C

--

-

--

96

Asb

estos C

emen

tA

CA

S 1711C

lass AB

Class C

D

--

96

--

96

Rein

forced

Co

ncrete

RC

AS 4058

Class 2,3 o

r 4-

--

NON PRESSURE PIPE

Grey C

ast Iron

Soil P

ipe

AS 1631

EN 877

--

86

--

83

PV

CSW

VA

S/NZ

S 126056

6983

Pu

trified C

layV

CA

S 1741-

--

Fibre R

einfo

rced C

emen

tFR

CC

lass X-

--

Asb

estos C

emen

tA

CA

S 1741

Class 35

Class 50

--

-

--

-

PIP

E OU

TSID

E DIA

METER

- NO

MIN

AL S

IZE

100

125

150

175

200

225

250

300

350

375

400

450

500

525

600

675

750

122-

177-

232259

286345

-426

-507

560-

667-

826

118-

170-

222-

274326

378-

429480

532-

635-

-

114-

168-

219257

273324

356406

457508

559-

660-

813

114140

165-

--

--

--

--

--

--

-

114

122

140-

160

177

200-

225

232

250

259

280

286

315

345

355-

400

426

450-

500

507

560

560

--

630

667

--

--

110/

125160

180-

250280

315355

-450

--

--

--

-

114140

168-

219-

--

--

--

--

--

-

122-

177-

232259

28634

53 99

426453

507560

587667

747826

102127

152-

203229

--

--

--

--

--

-

122-

177-

232259

286334

-413

-492

545-

650-

-

122-

177-

232259

286345

-426

-507

560-

667-

-

122-

177-

232259

286334

-413

-492

-572

650-

-

122-

177-

232259

286345

-426

-507

-587

667747

826

--

197-

-279

-362

-445

-533

-616

699787

870

112140

165-

-244

-325

--

--

--

--

-

110135

160-

210-

274326

--

429-

532-

635-

-

110-

160-

-250

-315

-400

--

--

--

-

138-

194-

-280

-370

-450

485535

-635

710-

-

124-

179-

261-

-245

-426

-510

-594

679-

-

120

-1 77

-230

257283

336-

419-

497-

576657

--

122-

183-

236262

289344

-425

-505

-585

664-

-

PIP

E SIZ

E DIM

ENSIO

NA

L DA

TA


MMMEAN

BORE DIMM

MEANODMM

MEANWALLMM

MASSKG/5MLENGTH

MEANBORE DI

MM

MEANODMM

MEANWALLMM

MASSKG/3MLENGTH

MEANBORE DI

MM

MEANODMM

MEANWALLMM

MASSKG/4MLENGTH

MEANBORE DI

MM

MEANODMM

MEANWALLMM

MASSKG/4MLENGTH

MEANBORE DI

MM

MEANODMM

MEANWALLMM

MASSKG/4.5MLENGTH



PIPE


WEFATHERM COLD

WATER PIPE PN10

WEFATHERM HOT



25

32

40

50

56

58

63

65

75

78

90

110

125

160

200

250

315

200

250

315

SDR33

SDR33

SDR33

SDR26

SDR26

SDR26

-

32

40

50

56

-

63

-

75

-

90

110

125

160

200

250

315

200

250

315

-

26

34

44

50

-

57

-

69

-

83

101.4

115.2

147.6

187.6

234.6

295.6

184.6

230.8

290.8

-

3

3

3

3

-

3

-

3

-

3.5

4.3

4.9

6.2

6.2

7.7

9.7

7.7

9.6

12.1

-

1.53

1.85

2.3

2.65

-

2.98

-

3.7

-

4.9

7.25

9.3

15.4

20.5

30.5

47.55

25.62

38.12

57.06

-

-

-

-

-

58

-

-

-

78

-

110

-

160

-

-

-

-

-

-

-

-

-

-

-

50

-

-

-

68.8

-

98.8

-

148.8

-

-

-

-

-

-

-

-

-

-

-

4.2

-

-

-

4.6

-

5.6

-

5.6

-

-

-

-

-

-

-

-

-

-

-

10.32

-

-

-

18.3

-

30.6

-

45

-

-

-

-

-

-

25

32

40

50

-

-

63

-

75

-

90

110

125

-

-

-

-

-

-

-

20.4

26.2

32.6

40.8

-

-

51.4

-

61.4

-

73.6

90

102.2

-

-

-

-

-

-

-

2.3

2.9

3.7

4.6

-

-

5.8

-

6.8

-

8.2

10

11.4

-

-

-

-

-

-

-

0.668

1.07

1.68

2.55

-

-

4.04

-

5.68

-

8.12

12.04

15.6

-

-

-

-

-

-

-

25

32

40

50

-

-

63

-

75

-

90

110

125

-

-

-

-

-

-

-

16.6

21.2

26.6

33.4

-

-

42

-

50

-

60

73.4

83.4

-

-

-

-

-

-

-

4.2

5.4

6.7

8.3

-

-

10.5

-

12.5

-

15

18.3

20.8

-

-

-

-

-

-

-

1

1.64

2.54

3.98

-

-

6.28

-

8.92

-

13.44

20.16

25.88

-

-

-

-

-

-

-

33.4

42.16

48.26

60.33

-

-

-

73.03

-

-

-

-

-

-

-

-

-

-

-

-

24.3

32.5

38.14

49.22

-

-

-

58.98

-

-

-

-

-

-

-

-

-

-

-

-

4.55

4.83

5.06

5.56

-

-

-

7.03

-

-

-

-

-

-

-

-

-

-

-

-

2.86

3.96

4.8

6.64

-

-

-

9.45

-

-

-

-

-

-

-

-

-

-

-

-

HDPE DWV COPPER

50 MM

56

75

90

110

160

MM

MM

MM

MM

MM

40 MM

50

65

80

100

150

MM

MM

MM

MM

MM

40 MM

50

65

80

100

MM

MM

MM

MM


MEAN ODMM

20

25

32

40

50

63

80

100

125

150


MEAN BOREDI. MM

MEAN WALLMM

MEAN ODMM

MEAN BOREDI. MM

MEAN WALLMM

MM

19.85

24.85

31.85

39.85

49.85

62.85

88.90

114.30

140.20

160.30

16.05

21.05

27.45

35.45

45.45

58.45

84.50

109.90

135.80

155.90

1.90

1.90

2.20

2.20

2.20

2.20

2.20

2.20

2.20

2.20

19.85

24.85

31.85

39.85

49.85

62.85

88.90

114.30

140.20

160.30

15.05

19.65

26.25

33.45

42.85

54.85

79.30

102.30

125.40

143.30

2.40

2.60

2.80

3.20

3.50

4.00

4.80

6.00

7.40

8.50




FLANGE TABLES

STANDARDDIAMETER

OF FLANGEINCH : MM

BCD/PCDINCH : MM

NO. OF BOLTS DI. OF BOLTSINCH : MM

DI. OF HOLESINCH : MM

DI. OFRAISED FACEINCH : MM

HEIGHT OFRAISED FLANGE

MM

GREY CASTIRON

INCH : MM

COPPERALLOY

INCH : MM

CAST &FORGED STEEL

INCH : MM

NOMINAL BORE 3/4” : 20MM


NOMINAL BORE 1” : 25MM

NOMINAL BORE 1 1/4” : 32MM











THICKNESS OF FLANGE

THICKNESS OF FLANGE

THICKNESS OF FLANGE

THICKNESS OF FLANGE

THICKNESS OF FLANGE

THICKNESS OF FLANGE

THICKNESS OF FLANGE

THICKNESS OF FLANGE

THICKNESS OF FLANGE

THICKNESS OF FLANGE

THICKNESS OF FLANGE

THICKNESS OF FLANGE

THICKNESS OF FLANGE

THICKNESS OF FLANGE

3 3/4 : 95

3 3/4 : 95

3 1/2 : 89

95

4 : 102

4 : 102

3 7/8 : 98

105

4 1/2 : 114

4 1/2 : 114

4 1/4 : 108

115

4 3/4 : 121

4 3/4 : 121

4 5/8 : 118

140

5 1/4 : 133

5 1/4 : 133

5 : 127

150

6 : 152

6 : 152

6 : 152

165

6 1/2 : 165

6 1/2 : 165

7 : 178

185

7 1/4 : 184

7 1/4 : 184

7 1/2 : 191

200

8 1/2 : 216

8 1/2 : 216

9 : 229

220

10 : 254

10 : 254

10 : 254

250

11 : 279

11 : 279

11 : 279

285

13 1/4 : 337

13 1/4 : 337

13 1/2 : 343

340

16 : 406

16 : 406

16 : 406

395

18 : 457

18 : 457

19 : 483

445

2 5/8 : 67

2 5/8 : 67

2 3/8 : 60

65

2 7/8 : 73

2 7/8 : 73

2 3/4 : 70

75

3 1/4 : 83

3 1/4 : 83

3 1/8 : 79

85

3 7/16 : 87

3 7/16 : 87

3 1/2 : 89

100

3 7/8 : 98

3 7/8 : 98

3 7/8 : 98

110

4 1/2 : 114

4 1/2 : 114

4 3/4 : 121

125

5 : 127

5 : 127

5 1/2 : 140

145

5 3/4 : 146

5 3/4 : 146

6 : 152

160

7 : 178

7 : 178

7 1/2 : 191

180

8 1/4 : 210

8 1/4 : 210

8 1/2 : 216

210

9 1/4 : 235

9 1/4 : 235

9 1/2 : 241

240

11 1/2 : 292

11 1/2 : 292

11 3/4 : 299

295

14 : 356

14 : 356

14 1/4 : 362

350

16 : 406

16 : 406

17 : 432

400

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

8

4

8

8

8

8

8

8

8

8

8

8

8

8

8

8

8

8

12

12

12

12

12

12

12

1/2 : 13

1/2 : 13

1/2 : 13

M12

1/2 : 13

1/2 : 13

1/2 : 13

M12

1/2 : 13

1/2 : 13

1/2 : 13

M12

1/2 : 13

1/2 : 13

1/2 : 13

M16

1/2 : 13

1/2 : 13

1/2 : 13

M16

5/8 : 16

5/8 : 16

5/8 : 16

M16

5/8 : 16

5/8 : 16

5/8 : 16

M16

5/8 : 16

5/8 : 16

5/8 : 16

M16

5/8 : 16

5/8 : 16

5/8 : 16

M16

5/8 : 16

5/8 : 16

3/4 : 19

M16

5/8 : 16

3/4 : 19

3/4 : 19

M20

5/8 : 16

3/4 : 19

3/4 : 19

M20

3/4 : 19

3/4 : 19

7/8 : 22

M20

3/4 : 19

7/8 : 22

7/8 : 22

M20

9/16 : 14

9/16 : 14

5/8 : 16

14

9/16 : 14

9/16 : 14

5/8 : 16

14

9/16 : 14

9/16 : 14

5/8 : 16

14

9/16 : 14

9/16 : 14

5/8 : 16

18

9/16 : 14

9/16 : 14

5/8 : 16

18

11/16 : 17.5

11/16 : 17.5

3/4 : 19

18

11/16 : 17.5

11/16 : 17.5

3/4 : 19

18

11/16 : 17.5

11/16 : 17.5

3/4: 19

18

11/16 : 17.5

11/16 : 17.5

3/4 : 19

18

11/16 : 17.5

11/16 : 17.5

7/8 : 22

18

11/16 : 17.5

7/8 : 22

7/8 : 22

22

11/16 : 17.5

7/8 : 22

7/8 : 22

22

7/8 : 22

7/8 : 22

1 : 25

22

7/8 : 22

1 : 25

1 : 25

22

-

-

1 3/8 : 35

45

-

-

1 11/16 : 43

58

-

-

2 : 51

68

-

-

2 1/2 : 63.5

78

-

-

2 7/8 : 73

88

-

-

3 5/8 : 92

102

-

-

4 1/8 : 105

122

-

-

5 : 127

138

-

-

6 3/16 : 157

158

-

-

7 5/16 : 186

188

-

-

8 1/2 : 216

212

-

-

10 5/8 : 270

268

-

-

12 3/4 : 324

320

-

-

15 : 381

370

-

-

-

2

-

-

-

2

-

-

-

2

-

-

-

2

-

-

-

3

-

-

-

3

-

-

-

3

-

-

-

3

-

-

-

3

-

-

-

3

-

-

-

3

-

-

-

3

-

-

-

3

-

-

-

4

1/2 : 13

1/2 : 13

-

14

1/2 : 13

1/2 : 13

-

16

1/2 : 13

1/2 : 13

7/16 : 11

16

5/8 : 16

5/8 : 16

1/2 : 13

18

5/8 : 16

5/8 : 16

9/16 : 14

18

11/16 : 17.5

3/4 : 19

5/8 : 16

20

11/16 : 17.5

3/4 : 19

11/16 : 17.5

20

3/4 : 19

3/4 : 19

3/4 : 19

22

3/4 : 19

7/8 : 22

15/16 : 24

24

13/16 : 21

7/8 : 22

15/16 : 24

26

13/16 : 21

7/8 : 22

1 : 25

26

7/8 : 22

1 : 25

1 1/8 : 29

26

1 : 25

1 : 25

1 3/16 : 30

28

1 : 25

1 1/8 : 29

1 1/4 : 32

28

1/4 : 6

1/4 : 6

5/16 : 8

-

1/4 : 6

1/4 : 6

11/32 : 9

-

5/16 : 8

5/16 : 8

3/8 : 9.5

-

5/16 : 8

5/16 : 8

13/32 : 10

-

3/8 : 9.5

3/8 : 9.5

7/16 : 11

-

3/8 : 9.5

3/8 : 9.5

1/2 : 13

-

7/16 : 11

7/16 : 11

9/16 : 14

-

1/2 : 13

1/2 : 13

5/8 : 16

-

5/8 : 16

5/8 : 16

11/16 : 17.5

-

11/16 : 17.5

11/16 : 17.5

3/4 : 19

-

11/16 : 17.5

11/16 : 17.5

13/16 : 21

-

3/4 : 19

3/4 : 19

15/16 : 24

-

3/4 : 19

7/8 : 22

1 : 25

-

7/8 : 22

1 : 25

1 1/16 : 27

-

3/8 : 9.5

3/8 : 9.5

7/16 : 11

-

3/8 : 9.5

3/8 : 9.5

9/16 : 14

-

3/8 : 9.5

3/8 : 9.5

7/16 : 11

-

1/2 : 13

1/2 : 13

1/2 : 13

-

1/2 : 13

1/2 : 13

9/16 : 14

-

9/16 : 14

9/16 : 14

5/8 : 16

-

9/16 : 14

9/16 : 14

11/16 : 17.5

-

9/16 : 14

9/16 : 14

3/4 : 19

-

11/16 : 17.5

11/16 : 17.5

15/16 : 24

-

11/16 : 17.5

11/16 : 17.5

15/16 : 24

-

11/16 : 17.5

11/16 : 17.5

1 : 25

-

3/4 : 19

3/4 : 19

1 1/8 : 29

-

3/4 : 19

7/8 : 22

1 3/16 : 30

-

7/8 : 22

1 : 25

1 1/4 : 32

-

TABLE D

TABLE E

ANSI 125/50

DIN 10

TABLE D

TABLE E

ANSI 125/50

DIN 10

TABLE D

TABLE E

ANSI 125/50

DIN 10

TABLE D

TABLE E

ANSI 125/50

DIN 10

TABLE D

TABLE E

ANSI 125/50

DIN 10

TABLE D

TABLE E

ANSI 125/50

DIN 10

TABLE D

TABLE E

ANSI 125/50

DIN 10

TABLE D

TABLE E

ANSI 125/50

DIN 10

TABLE D

TABLE E

ANSI 125/50

DIN 10

TABLE D

TABLE E

ANSI 125/50

DIN 10

TABLE D

TABLE E

ANSI 125/50

DIN 10

TABLE D

TABLE E

ANSI 125/50

DIN 10

TABLE D

TABLE E

ANSI 125/50

DIN 10

TABLE D

TABLE E

ANSI 125/50

DIN 10


CONVERSION FACTORS TABLE

FROM TO MULTIPLY BY

VOLUME

FLOW

FLOW

FLOW

FLOW

FLOW

US gallon

imperial gallon

litres

imperial gallon

cubic metres

litres

cubic metres/sec

cubic metres/hr

gallons/min

cubic metres/hr

cubic metres/hr

metres/sec

metres/sec

metres/sec

horsepower

kilowatts

pound/sq. inch

Pascals

pounds/cu. foot

kilograms/cu. m

kilograms/sq. m

Pascals

Pascals

kilopascals

feet head

feet head

metres head

kilopascals

pound/sq. inch

metres head

pound/sq. inch

kilopascals

hectares

square metres

hectares

acres

FLOW

FLOW

FLOW

FLOW

FLOW

FLOW

1.2

0.83

4.55

0.22

0.001

28.32

0.0000523

0.272

3.67

3.6

0.06

0.00508

0.3048

0.2778

0.746

1.34

14.223

9.807

0.06243

16.019

4.8824

47.88

6.894

3.35

0.2984

2.31

0.102

9.83

1.422

0.703

0.145

6.895

0.0001

10

0.405

2.469

VOLUME

imperial gallon

US gallon

imperial gallon

litres

litres

cubic feet

FLOW

gallons/min

gallons/min

cubic metres/hr

litres/sec

litres/min

VELOCITY

feet/min

feet/sec

kilometres/hour

POWER

kilowatts

horsepower

PRESSURE

kilograms/sq. cm

kilograms/sq. m

kilograms/cu. m

pounds/cu. foot

pounds/sq. foot

pounds/sq. foot

pounds/sq. inch

feet head

kilopascals

pounds/sq. inch

kilopascals

metres head

metres head

pounds/sq. inch

kilopascals

pounds/sq. inch

AREA

square metres

hectares

acres

hectares

IMPERIAL THREAD SIZES

IMPERIAL SIZE METRIC EQUIVALENT (NOMINAL)

1/16"

1/8”

3/16”

1/4”

3/8”

1/2”

3/4”

1”

1 1/4”

1 1/2”

2”

2 1/2”

3”

4”

1.6 mm

3.2 mm

5 mm

6 mm

10 mm

13 mm or 15 mm

19 mm or 20 mm

25 mm

32 mm

40 mm

50 mm

65 mm

80 mm

100 mm

Note: Gallons are imperial gallons unless otherwise stated


Disclaimer: Product dimensions, weights and conversion tables are to

be used as a guide only.

Total Eden does not accept responsibility for any errors or omissions.



FLANGE TABLES

STANDARDDIAMETER

OF FLANGEINCH : MM

BCD/PCDINCH : MM

NO. OF BOLTS DI. OF BOLTSINCH : MM

DI. OF HOLESINCH : MM

DI. OFRAISED FACEINCH : MM

HEIGHT OFRAISED FLANGE

MM

GREY CASTIRON

INCH : MM

COPPERALLOY

INCH : MM

CAST &FORGED STEEL

INCH : MM















THICKNESS OF FLANGE

THICKNESS OF FLANGE

THICKNESS OF FLANGE

THICKNESS OF FLANGE

THICKNESS OF FLANGE

THICKNESS OF FLANGE

THICKNESS OF FLANGE

THICKNESS OF FLANGE

THICKNESS OF FLANGE

THICKNESS OF FLANGE

THICKNESS OF FLANGE

THICKNESS OF FLANGE

THICKNESS OF FLANGE

THICKNESS OF FLANGE

3 3/4 : 95

3 3/4 : 95

3 1/2 : 89

95

4 : 102

4 : 102

3 7/8 : 98

105

4 1/2 : 114

4 1/2 : 114

4 1/4 : 108

115

4 3/4 : 121

4 3/4 : 121

4 5/8 : 118

140

5 1/4 : 133

5 1/4 : 133

5 : 127

150

6 : 152

6 : 152

6 : 152

165

6 1/2 : 165

6 1/2 : 165

7 : 178

185

7 1/4 : 184

7 1/4 : 184

7 1/2 : 191

200

8 1/2 : 216

8 1/2 : 216

9 : 229

220

10 : 254

10 : 254

10 : 254

250

11 : 279

11 : 279

11 : 279

285

13 1/4 : 337

13 1/4 : 337

13 1/2 : 343

340

16 : 406

16 : 406

16 : 406

395

18 : 457

18 : 457

19 : 483

445

2 5/8 : 67

2 5/8 : 67

2 3/8 : 60

65

2 7/8 : 73

2 7/8 : 73

2 3/4 : 70

75

3 1/4 : 83

3 1/4 : 83

3 1/8 : 79

85

3 7/16 : 87

3 7/16 : 87

3 1/2 : 89

100

3 7/8 : 98

3 7/8 : 98

3 7/8 : 98

110

4 1/2 : 114

4 1/2 : 114

4 3/4 : 121

125

5 : 127

5 : 127

5 1/2 : 140

145

5 3/4 : 146

5 3/4 : 146

6 : 152

160

7 : 178

7 : 178

7 1/2 : 191

180

8 1/4 : 210

8 1/4 : 210

8 1/2 : 216

210

9 1/4 : 235

9 1/4 : 235

9 1/2 : 241

240

11 1/2 : 292

11 1/2 : 292

11 3/4 : 299

295

14 : 356

14 : 356

14 1/4 : 362

350

16 : 406

16 : 406

17 : 432

400

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

8

4

8

8

8

8

8

8

8

8

8

8

8

8

8

8

8

8

12

12

12

12

12

12

12

1/2 : 13

1/2 : 13

1/2 : 13

M12

1/2 : 13

1/2 : 13

1/2 : 13

M12

1/2 : 13

1/2 : 13

1/2 : 13

M12

1/2 : 13

1/2 : 13

1/2 : 13

M16

1/2 : 13

1/2 : 13

1/2 : 13

M16

5/8 : 16

5/8 : 16

5/8 : 16

M16

5/8 : 16

5/8 : 16

5/8 : 16

M16

5/8 : 16

5/8 : 16

5/8 : 16

M16

5/8 : 16

5/8 : 16

5/8 : 16

M16

5/8 : 16

5/8 : 16

3/4 : 19

M16

5/8 : 16

3/4 : 19

3/4 : 19

M20

5/8 : 16

3/4 : 19

3/4 : 19

M20

3/4 : 19

3/4 : 19

7/8 : 22

M20

3/4 : 19

7/8 : 22

7/8 : 22

M20

9/16 : 14

9/16 : 14

5/8 : 16

14

9/16 : 14

9/16 : 14

5/8 : 16

14

9/16 : 14

9/16 : 14

5/8 : 16

14

9/16 : 14

9/16 : 14

5/8 : 16

18

9/16 : 14

9/16 : 14

5/8 : 16

18

11/16 : 17.5

11/16 : 17.5

3/4 : 19

18

11/16 : 17.5

11/16 : 17.5

3/4 : 19

18

11/16 : 17.5

11/16 : 17.5

3/4: 19

18

11/16 : 17.5

11/16 : 17.5

3/4 : 19

18

11/16 : 17.5

11/16 : 17.5

7/8 : 22

18

11/16 : 17.5

7/8 : 22

7/8 : 22

22

11/16 : 17.5

7/8 : 22

7/8 : 22

22

7/8 : 22

7/8 : 22

1 : 25

22

7/8 : 22

1 : 25

1 : 25

22

-

-

1 3/8 : 35

45

-

-

1 11/16 : 43

58

-

-

2 : 51

68

-

-

2 1/2 : 63.5

78

-

-

2 7/8 : 73

88

-

-

3 5/8 : 92

102

-

-

4 1/8 : 105

122

-

-

5 : 127

138

-

-

6 3/16 : 157

158

-

-

7 5/16 : 186

188

-

-

8 1/2 : 216

212

-

-

10 5/8 : 270

268

-

-

12 3/4 : 324

320

-

-

15 : 381

370

-

-

-

2

-

-

-

2

-

-

-

2

-

-

-

2

-

-

-

3

-

-

-

3

-

-

-

3

-

-

-

3

-

-

-

3

-

-

-

3

-

-

-

3

-

-

-

3

-

-

-

3

-

-

-

4

1/2 : 13

1/2 : 13

-

14

1/2 : 13

1/2 : 13

-

16

1/2 : 13

1/2 : 13

7/16 : 11

16

5/8 : 16

5/8 : 16

1/2 : 13

18

5/8 : 16

5/8 : 16

9/16 : 14

18

11/16 : 17.5

3/4 : 19

5/8 : 16

20

11/16 : 17.5

3/4 : 19

11/16 : 17.5

20

3/4 : 19

3/4 : 19

3/4 : 19

22

3/4 : 19

7/8 : 22

15/16 : 24

24

13/16 : 21

7/8 : 22

15/16 : 24

26

13/16 : 21

7/8 : 22

1 : 25

26

7/8 : 22

1 : 25

1 1/8 : 29

26

1 : 25

1 : 25

1 3/16 : 30

28

1 : 25

1 1/8 : 29

1 1/4 : 32

28

1/4 : 6

1/4 : 6

5/16 : 8

-

1/4 : 6

1/4 : 6

11/32 : 9

-

5/16 : 8

5/16 : 8

3/8 : 9.5

-

5/16 : 8

5/16 : 8

13/32 : 10

-

3/8 : 9.5

3/8 : 9.5

7/16 : 11

-

3/8 : 9.5

3/8 : 9.5

1/2 : 13

-

7/16 : 11

7/16 : 11

9/16 : 14

-

1/2 : 13

1/2 : 13

5/8 : 16

-

5/8 : 16

5/8 : 16

11/16 : 17.5

-

11/16 : 17.5

11/16 : 17.5

3/4 : 19

-

11/16 : 17.5

11/16 : 17.5

13/16 : 21

-

3/4 : 19

3/4 : 19

15/16 : 24

-

3/4 : 19

7/8 : 22

1 : 25

-

7/8 : 22

1 : 25

1 1/16 : 27

-

3/8 : 9.5

3/8 : 9.5

7/16 : 11

-

3/8 : 9.5

3/8 : 9.5

9/16 : 14

-

3/8 : 9.5

3/8 : 9.5

7/16 : 11

-

1/2 : 13

1/2 : 13

1/2 : 13

-

1/2 : 13

1/2 : 13

9/16 : 14

-

9/16 : 14

9/16 : 14

5/8 : 16

-

9/16 : 14

9/16 : 14

11/16 : 17.5

-

9/16 : 14

9/16 : 14

3/4 : 19

-

11/16 : 17.5

11/16 : 17.5

15/16 : 24

-

11/16 : 17.5

11/16 : 17.5

15/16 : 24

-

11/16 : 17.5

11/16 : 17.5

1 : 25

-

3/4 : 19

3/4 : 19

1 1/8 : 29

-

3/4 : 19

7/8 : 22

1 3/16 : 30

-

7/8 : 22

1 : 25

1 1/4 : 32

-

TABLE D

TABLE E

ANSI 125/50

DIN 10

TABLE D

TABLE E

ANSI 125/50

DIN 10

TABLE D

TABLE E

ANSI 125/50

DIN 10

TABLE D

TABLE E

ANSI 125/50

DIN 10

TABLE D

TABLE E

ANSI 125/50

DIN 10

TABLE D

TABLE E

ANSI 125/50

DIN 10

TABLE D

TABLE E

ANSI 125/50

DIN 10

TABLE D

TABLE E

ANSI 125/50

DIN 10

TABLE D

TABLE E

ANSI 125/50

DIN 10

TABLE D

TABLE E

ANSI 125/50

DIN 10

TABLE D

TABLE E

ANSI 125/50

DIN 10

TABLE D

TABLE E

ANSI 125/50

DIN 10

TABLE D

TABLE E

ANSI 125/50

DIN 10

TABLE D

TABLE E

ANSI 125/50

DIN 10


CONVERSION FACTORS TABLE

FROM TO MULTIPLY BY

VOLUME

FLOW

FLOW

FLOW

FLOW

FLOW

US gallon

imperial gallon

litres

imperial gallon

cubic metres

litres

cubic metres/sec

cubic metres/hr

gallons/min

cubic metres/hr

cubic metres/hr

metres/sec

metres/sec

metres/sec

horsepower

kilowatts

pound/sq. inch

Pascals

pounds/cu. foot

kilograms/cu. m

kilograms/sq. m

Pascals

Pascals

kilopascals

feet head

feet head

metres head

kilopascals

pound/sq. inch

metres head

pound/sq. inch

kilopascals

hectares

square metres

hectares

acres

FLOW

FLOW

FLOW

FLOW

FLOW

FLOW

1.2

0.83

4.55

0.22

0.001

28.32

0.0000523

0.272

3.67

3.6

0.06

0.00508

0.3048

0.2778

0.746

1.34

14.223

9.807

0.06243

16.019

4.8824

47.88

6.894

3.35

0.2984

2.31

0.102

9.83

1.422

0.703

0.145

6.895

0.0001

10

0.405

2.469

VOLUME

imperial gallon

US gallon

imperial gallon

litres

litres

cubic feet

FLOW

gallons/min

gallons/min

cubic metres/hr

litres/sec

litres/min

VELOCITY

feet/min

feet/sec

kilometres/hour

POWER

kilowatts

horsepower

PRESSURE

kilograms/sq. cm

kilograms/sq. m

kilograms/cu. m

pounds/cu. foot

pounds/sq. foot

pounds/sq. foot

pounds/sq. inch

feet head

kilopascals

pounds/sq. inch

kilopascals

metres head

metres head

pounds/sq. inch

kilopascals

pounds/sq. inch

AREA

square metres

hectares

acres

hectares

IMPERIAL THREAD SIZES

IMPERIAL SIZE METRIC EQUIVALENT (NOMINAL)

1/16"

1/8”

3/16”

1/4”

3/8”

1/2”

3/4”

1”

1 1/4”

1 1/2”

2”

2 1/2”

3”

4”

1.6 mm

3.2 mm

5 mm

6 mm

10 mm

13 mm or 15 mm

19 mm or 20 mm

25 mm

32 mm

40 mm

50 mm

65 mm

80 mm

100 mm

Note: Gallons are imperial gallons unless otherwise stated


Disclaimer: Product dimensions, weights and conversion tables are to

be used as a guide only.

Total Eden does not accept responsibility for any errors or omissions.



NOTES



OUR TRADING TERMSTerms and Conditions of Supply 1. Unless otherwise agreed in writing by Total Eden Pty Ltd (the Seller), the Buyer agrees that it will be bound by these terms and conditions if the Buyer places an order with the Seller and it is accepted by the Seller. The Seller is not bound by any terms and conditions contained in any document issued by the Buyer.

Orders, Quotations and Price2. Once an order has been accepted by the Seller, it cannot be cancelled by the Buyer. The supply of goods or services is subject to availability. The Seller reserves the right to suspend or discontinue the supply of goods or services to the Buyer. If the Seller is unable to supply all of the Buyer’s order, these terms and conditions continue to apply to any part of the order supplied.

3. Where a written quotation has been given by the Seller, the selling price is the price specified in the quotation. In any other case, the Seller’s selling price is the price specified in the price list as at the date of despatch. Unless otherwise stated, the selling price does not include GST. The Seller may at any time change its price list to reflect, among other things, changes in exchange rates or the imposition of any duties, levies or other taxes and the Buyer is bound by those changes.

Delivery 4. Unless otherwise agreed in writing by the Seller, delivery is at the Seller’s premises. All freight from the Seller’s premises to the Buyer is at the Buyer’s expense. If the Seller arranges the carriage of the goods for delivery to the Buyer, the Seller will be deemed to contract as agent for the Buyer, and the Buyer will bear all risks with respect to the goods during carriage and will likewise be responsible for effecting any insurance of the goods during carriage. The Seller may charge a reasonable handling fee for all orders delivered to the Buyer. The Buyer indemnifies the Seller for the cost of all transport arranged by the Seller on the Buyer’s behalf.

5. If a delivery date is specified, that date is an estimate only and the Seller is not liable for any delay in delivery. Time is not of the essence in relation to delivery and the Buyer must accept delivery and pay for the goods delivered, including transport costs if applicable, even if they are delivered after any specified delivery date.

Inspection, Acceptance and Returns6. The Buyer must inspect the goods or services immediately following delivery or completion of the services (as the case may be). The Buyer may only return goods with the prior approval of the Seller and within 30 days of the date of delivery in re-saleable condition and, where appropriate, in the original packaging. A reasonable handling fee for any returned goods will be charged to the Buyer.

Any claim that the goods or services are not in accordance with these terms and conditions (including if they are defective, damaged during delivery, are short delivered or services not as per contract) must be made at the time of delivery/services provided or in writing to the Seller within 48 hours after delivery of the goods/completion of the services to the Buyer. If the Buyer fails to make a claim then, to the extent permitted by law, the goods or services are deemed to have been accepted by the Buyer and the Buyer must pay for the goods or services in accordance with these terms and conditions.

Payment7. Unless otherwise agreed, if the Buyer has an approved credit account with the Seller, the Buyer must pay for goods or services ordered by the Buyer within 30 days from the end of the month of invoicing, or earlier if the approved credit limit is exceeded. Where the Buyer does not have a credit account with the Seller, all goods and services are to be paid for at the time of delivery. The Seller may charge an administration fee for any payments by credit card. Time is of the essence in respect of the Buyer’s obligation to make payment for goods or services supplied by the Seller to the Buyer.

8. If the Buyer does not make any payment by the due date, exceeds its credit limit at any time, commits any other material breach of these terms and conditions, or an insolvency event in respect of the Buyer arises or is reasonably suspected by the Seller, the Seller may (without limiting any other right or claim it may have against the Buyer) do any or all of the following:a) charge the Buyer interest calculated on a daily basis on any portion of the Buyer’s account that is overdue at the Australian & New Zealand Banking Group’s reference rate for business loans, available to prime commercial customers, plus 5% calculated from the date the payment was due until the date payment is made (both dates inclusive);b) vary or withdraw any approved credit limit and/or terms of trade;c) cancel or suspend any unfilled orders or cease providing the services;d) terminate any contracts between the Seller and the Buyer and demand immediate payment of any moneys due and outstanding under those contracts;e) cancel any rebate, discount or allowance due or payable by the Seller as at the date of the event;f ) enter (at any time) any premises in which the Seller’s goods (including any merchandising materials) are stored, to enable the Seller to inspect the goods and to reclaim possession of the goods without liability for the tort of trespass, negligence or payment of any compensation to the Buyer whatsoever; org) institute any recovery process as the Seller in its discretion decides at the Buyer’s cost and expense.

9. If any part of an invoice is in dispute, the balance will remain payable and must be paid when due. The Buyer has no right to set-off any claim against the Seller from moneys owing to the Seller.

Risk and Title10. Goods supplied by the Seller to the Buyer are at the Buyer’s risk immediately on the earlier of delivery to the Buyer or into the Buyer’s custody, including its carrier or forwarder. The Buyer must insure the goods at its cost from delivery of the goods until they are paid for in full against such risks as are usual or common to insure against in a business of a similar nature to the Buyer.

11. Property in the goods supplied by the Seller to the Buyer does not pass to the Buyer until all goods have been paid for in full. In the meantime, the Buyer takes custody of the goods and retains them only as fiduciary agent and bailee of the Seller. Until all goods have been paid for in full:a) to the extent possible, the Buyer must store the goods in a manner that shows clearly they are the property of the Seller, maintain records relating to the goods, secure the goods from risk, damage and theft and ensure that the goods are kept in good and serviceable condition;b) the Buyer may sell the goods, in the ordinary course of its business, but only as fiduciary agent of the Seller. The Buyer must not represent to any third party that the Buyer is acting in any capacity for or on behalf of the Seller and the Buyer has no authority to bind the Seller to any contract or otherwise assume any liability for or on behalf of the Seller. The Buyer receives all proceeds (including any proceeds from insurance claims) in trust for the Seller and must keep the proceeds in a separate bank account until all liability to the Seller is discharged; c) if the Buyer uses the goods in some manufacturing or construction process of its own or of a third party, the Buyer must hold in trust for the Seller that part of the proceeds of the manufacturing or construction process as is equal to the amount owing by the Buyer to the Seller at the time of receipt of the proceeds.

Designs, Drawings and Instructions12. The Seller will retain ownership and all copyright in relation to all designs and drawings prepared for or on behalf of the Buyer, despite any payment made in accordance with these terms of sale.

13. Where the Supplier has followed a design or instruction furnished by or on behalf of the Buyer, the Buyer indemnifies and will keep the Seller indemnified against all claims, damages, losses, penalties, costs and expenses to which the Seller may become liable by reason of any work required to be done in accordance with those instructions or design including any infringement of any patent, registered design, copyright or any other right of a third party including moral rights.

Limitation of Liability14. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. The Buyer is entitled to a replacement of refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. The Buyer is also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Subject to the above, the Seller is not liable to the Buyer (whether in contract, tort including negligence, pursuant to statute or otherwise) for any loss of production, loss of business, loss of contract, loss of profit, goodwill or increased cost of workings or any other special, indirect, incidental or consequential damages, whether or not the possibility of such damages could have been reasonably foreseen.

Product Warranty15. All products advertised or displayed on the Seller’s website at www.totaleden.com.au are subject to a manufacturer’s warranty. The term of this warranty is subject to the individual manufacturer. The Seller is a reseller of products on behalf of manufacturers and the Seller does not take responsibility for the performance of these products.

For a copy of our full warranty policy please download the Total Eden Warranty Terms and Conditions.

Other Terms 16. This agreement contains the entire understanding of the parties as to its subject matter. There is no other understanding agreement, warranty or representation whether express or implied in any way defining or extending or otherwise relating to these provisions or binding on the parties with respect to the goods of their operation.

17. The application of the United Nations Convention on Contracts for the International Sale of Goods (known as the Vienna Sales Convention 1980) is excluded.

18. If any provision of these terms or conditions is unenforceable, illegal or void, that provision is severed and the other provisions remain in force.

19. The Seller may amend or vary these terms and conditions by notifying the Buyer in writing of the amendment or variation.

April 2017Total Eden Pty Ltd. ABN: 47 010 118 895

TERMS AND CONDITIONS OF SALE



WWW.TOTALEDEN.COM.AUBringing Water to Life

1300 65 40 40HEAD OFFICELEVEL 1, 33-47 DOHERTYS ROADLAVERTON NORTH VIC 3026

NSW | SA | QLD | VIC | WA

TOTAL EDEN PTY LTD | ABN 470 101 118 95APRIL 2017

TASK0011036_V03

TOTAL EDEN PLUMBING CATALOGUE · TOTAL EDEN PLUMBING CATALOGUE ... Cast Iron Water Fittings 74 ......

Documents

Transcript of TOTAL EDEN PLUMBING CATALOGUE · TOTAL EDEN PLUMBING CATALOGUE ... Cast Iron Water Fittings 74 ......