Toshiba SIPserver 1033

7/27/2019 Toshiba SIPserver 1033

1/17

GB V1

Toshiba SIPserverUser Manual


2/17

GB V1 2

PrefaceThis manual explains how to set up and operate Toshiba SIPserver.

Note that the screenshots and steps used in this document are for the Windows XP

operating system. Please use the equivalent operations when using a PC withWindows Vista.

TrademarksMicrosoft and Windows are either registered trademarks or trademarks of Microsoft

Corporation in the United States and/or other countries.


3/17

3 GB V1

Table of Contents

1 Overview ............................................................................................................ 42 Requirements..................................................................................................... 4

2.1 PC ................................................................................................................ 42.2 Wireless LAN................................................................................................ 4

3 Installing/Uninstalling.......................................................................................... 53.1 Installing SIPserver....................................................................................... 53.2 Uninstalling SIPserver .................................................................................. 8

4 Setting Up SIPserver .......................................................................................... 94.1 Starting SIPserver......................................................................................... 94.2 Menu .......................................................................................................... 104.3 Configuring SIPserver settings ................................................................... 114.4 Adding and deleting users .......................................................................... 12

4.4.1 Adding a user ...................................................................................... 134.4.2 Deleting a user..................................................................................... 14

5 Error Messages................................................................................................ 16


4/17

GB V1 4

1 OverviewSIPserver provides control of the connection required for Toshiba TIPtalk

communication. To use TIPtalk, it is necessary to register a user name and password

on SIPserver. Also, for TIPtalk communication, SIPserver must always be active.TIPtalk is an IP phone application which uses the SIP protocol and operates on your

Toshiba phone.

SIPserver does not support TIPtalk between phones across routers.

2 RequirementsThis section describes the operating requirements for SIPserver and TIPtalk

communication.

2.1 PCThe minimum PC requirements for SIPserver are shown in the table below.

CPU Intel Celeron 1 GHz

HDD 15 MB

Memory 256 MB

Network interface Network adapter

Display 800x600

Operating system Windows XP SP2 / Windows Vista

Other CD-ROM drive

2.2 Wireless LANTo provide TIPtalk communication, a Wireless LAN (WLAN) network adapter is

required in the PC on which SIPserver is installed, or the network to which SIPserver isconnected needs to have a WLAN router or WLAN access point.

Refer to the manual of your Wireless LAN network adapter for information about

setting up a WLAN network adapter. Alternatively, contact your network administrator

and obtain the settings required for connection to a WLAN router or WLAN access

point.


5/17

5 GB V1

3 Installing/Uninstalling3.1 Installing SIPserverTo use SIPserver, it is necessary to install the application on your PC from the

supplied CD-ROM in advance.

1.Insert the disk into the PC. The CD will run automatically. Press the button for yourpreferred language.


6/17

GB V1 6

2.Click the SIPserver CD button to start installing the SIPserver application.

3.Click the Next button.


7/17

7 GB V1

4.Click the Install button.When using Windows Vista, the User Account Control screen is displayed before

the installation starts. In this case, click the Continue button.


8/17

GB V1 8

5.Please wait while the application is installed.

6.When the application has finished installing, click the Finish button.The installation procedure is now complete.

3.2 Uninstalling SIPserverTo uninstall SIPserver:

1.Remove the Toshiba SIPserver application by using Add or Remove Programsin Control Panel of Windows.

The application is then uninstalled.


9/17

9 GB V1

4 Setting Up SIPserver4.1 Starting SIPserverTo start SIPserver:

1.Click Start > All Programs > TOSHIBA > Utilities > SIPserver > SIPserver.The SIPserver screen is displayed.

The SIPserver icon is also displayed on the task bar.


10/17

GB V1 10

4.2 MenuThe SIPserver menu is displayed by right-clicking the SIPserver icon on the task bar.

Menu item Description

Help Displays the online help.

Settings Opens the Settings screen for configuring network settings of

SIPserver.

Refer to Section 4.3 Configuring SIPserver settings for details.

Open Opens the main SIPserver screen. This screen is used for adding

and deleting TIPtalk users.

Refer to Section 4.4 Adding and deleting users for details.

Exit Exits SIPserver.

If this menu item is selected, the SIPserver service will be

stopped. Registered users cannot use TIPtalk until SIPserver isrestarted.


11/17

11 GB V1

4.3 Configuring SIPserver settingsThis screen is for configuring the SIPserver settings related to the network.

Item Description

Receive Port To select a port number for the receive port (where SIPserver

waits for the SIP messages) from 28100, 28130, 28160, 28190,

and 5060. A port number already used for another application

cannot be selected.

Note that if this value is changed, the Server port value

contained in the configuration settings of the TIPtalk application

on your Toshiba phone will also need to be changed.

The default value is 28100.

Network To select a network adapter.

Active network adapters on the SIPserver are displayed. If two or

more network adapters are displayed, select which to use. A

WLAN network adapter or a network adapter that connects to a

network including a WLAN router or wireless access point must

be selected.

Button Description

OK Saves the settings and closes the window.

Cancel Cancels the settings and closes the window.


12/17

GB V1 12

4.4 Adding and deleting usersTIPtalk users can be added or deleted from registration to the SIPserver as required.

Item Description

User name (1) List of registered user names.

User name (2) To enter the user name of a TIPtalk user.

Password To enter the password for the TIPtalk user.

Network Information Displays network information.

IP address Displays IP address of network interface.

Port Displays port number.

Button Description

Add Adds the entered user.


13/17

13 GB V1

4.4.1Adding a userUp to 20 TIPtalk users can be registered to the SIPserver.

To add a user:

1.Enter the User name and Password for the new user, and then click the Addbutton.

Item Description

User name To enter the user name of a TIPtalk user.

The user name can consist of a maximum of 16 alphanumerical

characters. The space character is invalid.

Password To enter the password for the TIPtalk user.

The password can consist of a maximum of 8 alphanumerical

characters. The space character is invalid.

This item is optional.


14/17

GB V1 14

The added user is now registered to the SIPserver screen.

4.4.2 Deleting a userTo delete a user:

1.Right-click the mouse button on the user to delete, and then select Delete.


15/17

15 GB V1

A pop-up window informs the user that they will need to restart the SIPserver

application.

2.Click the OK button.The selected user has been removed.

3.Right-click the mouse button on the SIPserver icon on the task bar, and then selectExit.

4.To restart SIPserver, click Start > All Programs > TOSHIBA > Utilities >SIPserver > SIPserver.


16/17

GB V1 16

5 Error MessagesThis section describes error messages that may be encountered while using

SIPserver, and suggests solutions.

Message Meaning Solution

User name is empty. No user name has been

entered into the User

name field.

Enter a user name into the

User name field.

User name

Please enter no more

than 16 characters.

The user name entered

exceeds 16 characters.

Enter a shorter user name.

PasswordPlease enter no more

than 8 characters.

The password enteredexceeds 8 characters.

Enter a shorter password.

Only 20 users can be

registered.

The maximum 20 users

have already been

registered.

To register new users,

remove users that are

already registered.

Receive port is busy. The specified port number

is already in use by another

application.

Select another port number

for the Receive Port.

Toshiba SIPserver 1033

Documents

Transcript of Toshiba SIPserver 1033