TORQUE WRENCHES - HASCO, Inc · 2017-08-24 · TORQUE WRENCHES Description: HASCO RF break-over...

5214 Bonsai Street • Moorpark, CA 93021 (888) 498-3242 • [email protected] www.hasco-inc.com © 2015 HASCO COMPONENTS TORQUE WRENCHES Description: HASCO RF break-over torque wrenches are designed to guarantee an accurate mang torque when joining two components together. When the proper force has been achieved, these wrenches will become ineﬀecve by “breaking” and making them unusable until reset. • Anodized aluminum handles • Nickel-plated steel wrench heads • ANSI/NCSLZ540-3 and ISO-10011 calibration certification • Packaged in a wooden box • Labeled and serial numbered Sizes Available: HTW-516-08 5/16 8 in-lbs Part # Connector Type (S) Bit Size Preset HTW-532-02 SSMC 5/32 2 in-lbs HTW-1564-04 1.0mm 15/64 4 in-lbs HTW-14-05 SSMA 1/4 5 in-lbs HTW-14-08 SMA 1/4 8 in-lbs HTW-34-08 N 3/4 8 in-lbs SMA, 3.5mm, 2.4mm, 1.85mm HTW-58-12 TNC 5/8 12 in-lbs HTW-916-12 TNC 9/16 12 in-lbs HTW-1316-14 SC, N 13/16 14 in-lbs HTW-2532-14 N 25/32 14 in-lbs HTW-34-14 N, 7mm 3/4 14 in-lbs HASCO RF break-over torque wrenches are RoHS Compliant Important User Instrucons: Drawing 1 1. HASCO torque wrenches are unidireconal and preset torque can only be achieved when you use the wrench according to the force orientaon as illustrated in Drawing 1 above. 2. Fit the wrench around the connector hex nut and apply force on the torque wrench. Cauon: Do not apply force by holding any other part of the wrench other than the handle. Do not use any other lever aid on the wrench. Apply force with a smooth, steady acon. 3. Automac release: When the set torque is reached, the torque wrench will move through a small arc about the pivot pin. At this point the set torque has been achieved and force on the handle must be released. 4. If a wrench has not been used recently, actuate the wrench by clicking the wrench head back and forth several mes before use. Clicking the wrench head back and forth spreads lubricant throughout the internal mechanism to improve wrench performance. 5. Torque wrenches are precision instruments and should be carefully handled. Do no use as a hammer. If a wrench is dropped accidentally, it should be checked on a Torque Tester before using again.

Upload
others
Category

Documents
view
20
download
0

Embed Size (px):

Transcript of TORQUE WRENCHES - HASCO, Inc · 2017-08-24 · TORQUE WRENCHES Description: HASCO RF break-over...

5214 Bonsai Street • Moorpark, CA 93021(888) 498-3242 • [email protected]

TORQUE WRENCHES

Description:

HASCO RF break-over torque wrenches are designed to guarantee an accurate mating torque when joining two components together. When the proper force has been achieved, these wrenches will become ineffective by “breaking” and making them unusable until reset.

• Anodized aluminum handles• Nickel-plated steel wrench heads • ANSI/NCSLZ540-3 and ISO-10011 calibration certification • Packaged in a wooden box • Labeled and serial numbered

Sizes Available:

HTW-516-08 5/16 8 in-lbs

Part # Connector Type (S) Bit Size Preset

HTW-532-02 SSMC 5/32 2 in-lbs

HTW-1564-04 1.0mm 15/64 4 in-lbs

HTW-14-05 SSMA 1/4 5 in-lbs

HTW-14-08 SMA 1/4 8 in-lbs HTW-34-08 N 3/4 8 in-lbs

SMA, 3.5mm, 2.4mm, 1.85mm

HTW-58-12 TNC 5/8 12 in-lbs

HTW-916-12 TNC 9/16 12 in-lbs

HTW-1316-14 SC, N 13/16 14 in-lbs

HTW-2532-14 N 25/32 14 in-lbs

HTW-34-14 N, 7mm 3/4 14 in-lbs

HASCO RF break-over torque wrenches are RoHS Compliant

Important User Instructions:

Drawing 1

1. HASCO torque wrenches are unidirectional and preset torque can only be achieved when you use the wrench according to the force orientation as illustrated in Drawing 1 above.

2. Fit the wrench around the connector hex nut and apply force on the torque wrench. Caution: Do not apply force by holding any other part of the wrench other than the handle. Do not use any other lever aid on the wrench. Apply force with a smooth, steady action.

3. Automatic release: When the set torque is reached, the torque wrench will move through a small arc about the pivot pin. At this point the set torque has been achieved and force on the handle must be released.

4. If a wrench has not been used recently, actuate the wrench by clicking the wrench head back and forth several times before use. Clicking the wrench head back and forth spreads lubricant throughout the internal mechanism to improve wrench performance.

5. Torque wrenches are precision instruments and should be carefully handled. Do no use as a hammer. If a wrench is dropped accidentally, it should be checked on a Torque Tester before using again.