Torqlite

http://www.torqlite.com

Phone 877-777-4046 • Fax 877-777-4048 1914 Engineers Road • Belle Chasse, Louisiana USA 70037

“Dual Plane Swivel Fittings”

360º360º

Inline ratcheting wrenches require minimum clearance while applying torque on the same plane asthe nut, providing a marked improvement over square drive socket wrenches. Our patented designbreakthrough reduced the overall dimensions of the inline ratcheting head allowing it to fit almostevery application. Our IU-XL Series tool capacities range from 100 to 50,000 foot pounds of torqueusing a 10,000 p.s.i. hydraulic pump.

Available Upon Request

“Extra light, dependable, andfits where others can not”

IUXLFR02

Inline Ratchet - Standard fractional head sizesfrom 3/4" nuts across the flats. Metric and specialsizes available.

Precision Machined - Increases accuracy,durability and repeatability.

Unibody - Eliminates “Pinch Points”.

360 Swivel Fittings (Patented) - Allow hosemovement without hose binding. Stainless steelwith fewer moving parts - a great improvementover competitors’ delicate design. (Single planeswivel fittings shown on wrench above.)

Slotted Piston Rod - Maintains 90 relationshipbetween piston rod and nut. Increases accuracy.Reduces number of moving parts.

Cylinder - Made of TL T-6 durable, high-strength,lightweight aircraft alloy with the same sturdy,dependable and accurate design(as steel cylinder).

Reaction Pad - Reacts against adjacent nut. Noreaction member necessary.

Drive Pin Design (Patented) - Reduces overalldimensions of hex head including a thinner “nose”radius. Fits more applications, including all 57 A.P.I.flanges.

Coated - All exposed parts to resist corrosion.

Light/Ergonomic - Reduces operator fatigue.

Calibrated - Every tool is function tested andcalibrated to ± .03 accuracy, traceable to N.I.S.T.

Warranty - Torq/Lite IU-XL Series wrenches comewith a 3 Year – 2 Tier warranty, that is the beststandard warranty on the market today! We standbehind our wrenches like no other!

INLINE

IU-XL SERIESRatchet Wrench

INLINE

Division of Francis Services, Incorporated

IU-XL SERIESRatchet Wrench

1914 Engineers RoadBelle Chasse, Louisiana 70037

(504) 394-1400 Phone 877-777-4046(504) 394-0404 Fax 877-777-4048

IU-XL Max. Ft. Lbs. Length Height Body Head Range WeightSeries @ 10,000 p.s.i. Width Width with Head

IU-1XL§ 1,350 6.250” 4.000” 1.100” .950” 3/4” - 2” 7.25 lbs

IU-3XL 3,300 7.000” 5.750” 1.450” *1.075” or 1.200” 1-1/4” - 2-15/16” 9.25 lbs.

IU-7XL 7,200 9.750” 6.250” 1.500” 1.500” 2” - 3-7/8” 14.00 lbs

IU-10XL 10,600 9.250” 8.000” 1.950” 1.950” 2-3/8” - 4-1/4” 24.50 lbs.

IU-17XL 17,100 11.250” 9.250” 1.950” 2.450” 2-3/4” - 5-3/8” 42.00 lbs.

IU-25XL 25,600 11.250” 9.250” 2.900” 2.950” 3-1/2” - 5-3/4” 57.00 lbs.

IU-50XL§ 50,000 15.375” 10.500” 2.900” 2.950” 4-5/8” - 7-1/4” 85.00 lbs.*1-1/4” to 2” Heads † 2-3/16” to 2-15/16” Heads § Steel Cylinders Only

IU-1XL HeadsATF Radius P/R

3/4” 1.07” 0.41”

1-1/16” 1.18” 0.34”

1-1/4” 1.29” 0.34”

1-7/16” 1.40” 0.34”

1-5/8” 1.51” 0.34”

1-13/16” 1.61” 0.34”

2” 1.72” 0.34”






2” 1.80” 0.47”

2-3/16” 1.88” 0.47”

2-3/8” 2.02” 0.47”

2-9/16” 2.15” 0.47”

2-3/4” 2.40” 0.55”

2-15/16” 2.55” 0.50”

3-1/8” 2.62” 0.55”

3-1/2” 2.85” 0.85”

3-7/8” 3.04” 0.80”

2-3/4” 2.50” 0.90”

2-15/16” 2.62” 0.90”

3-1/8” 2.70” 0.90”

3-1/2” 2.90” 0.90”

3-7/8” 3.18” 0.95”

4-1/4” 3.35” 0.96”

4-5/8” 3.58” 0.96”

5” 3.90” 1.00”

5-3/8” 4.10” 1.00”

3-1/2” 2.90” 0.87”

3-7/8” 3.18” 0.95”

4-1/4” 3.35” 0.90”

4-5/8” 3.58” 0.90”

5” 3.85” 0.96”

5-3/8” 4.10” 1.00”

5-3/4” 4.32” 1.02”

4-5/8” 3.92” 1.25”

5” 4.13” 1.25”

5-3/8” 4.35” 1.25”

5-3/4” 4.57” 1.25”

6-1/8” 4.78” 1.25”

6-1/2” 5.00” 1.25”

6-7/8” 5.22” 1.25”

7-1/4” 5.43” 1.25”

1-1/4” 1.38” 0.35”

1-7/16” 1.46” 0.35”

1-5/8” 1.57” 0.35”

1-13/16” 1.70” 0.40”

1-7/8” 1.79” 0.46”

2” 1.79” 0.40”

2-3/16” 1.90” 0.40”

2-3/8” 1.97” 0.40”

2-9/16” 2.12” 0.46”

2-3/4” 2.24” 0.46”

2-15/16” 2.36” 0.46”


2-3/8” 2.02” 0.45”

2-9/16” 2.15” 0.47”

2-3/4” 2.40” 0.55”

2-15/16” 2.55” 0.50”

3-1/8” 2.62” 0.55”

3-1/2” 2.85” 0.85”

3-7/8” 3.07” 0.85”

4-1/4” 3.26” 0.85”

IUXLSR02

Hei

gh

t

LengthHead Width

Body Width

Radius

PR

SQUARE DRIVE

SU-XL SERIESRatchet Wrench


A time tested and proven tool design, square drive ratchets offer a cost efficient option to handle awide range of bolting make-up and break-out needs. The SU-XL Series ratchet employs a “patenteddesign”, which increases accuracy and reduces the number of moving parts. TL T-6 XL Series bodyencloses the drive train assembly, allowing no pinch points and lighter weight. Our standard SU-XLSeries tool capacities range from 100 to 60,000 foot pounds of torque using a 10,000 p.s.i.hydraulic pump.

Square Drive - For use with all standard sizesquare drive impact sockets. Easily shifts from make-up to break-out without disassembly.

TL T-6 - XL Series bodies made of durable, high-strength, lightweight aircraft alloy.

Unibody - Eliminates “Pinch Points”. Reduces sideloading. Totally enclosed drive train assembly,allowing nothing in or out of the tool.

360 Swivel Fittings (Patented) - Allowhose movement without hose binding. Stainlesssteel with fewer moving parts - a great improvementover competitors’ delicate design. (Single planeswivel fittings shown on wrench above.)

Slotted Piston Rod - Maintains 90 relationshipbetween piston rod and nut. Increases accuracy.Reduces number of moving parts.

Anti-Reverse Pawl - Holds rotational wind-upto maintain required torque.

Pawl Release - Anti-reverse pawl release mechanismallows manual release of tool if “binding” occurs.

Reaction Member - 360 rotation and madeof TL T-6. Increased reaction area. Ratchet can beused without reaction member.


Light/Ergonomic - Reduces operator fatigue.

Calibrated - Every tool is tested and calibratedto ±.03 accuracy, traceable to N.I.S.T.

Warranty - Torq/Lite® SU-XL Series wrenchescome with a 3 Year – 2 Tier warranty, that is thebest standard warranty on the market today! Westand behind our wrenches like no other!

SUXLFR02

“Dual Plane Swivel Fittings”

360º360º

Available Upon Request


(504) 394-1400 Phone 877-777-4046(504) 394-0404 Fax 877-777-4048

Manufactured by:

SQUARE DRIVE


SUXLSR03

SU-XL Square Max. Ft. Lbs. Weight* Reaction Length Length Length Radius Height Height Width Width WidthSeries Drive @10,000 p.s.i. Area - RA L1 L2 L3 R H1 H2 W1 W2 W3

SU-1XL 3/4” 1,400 5.25 lbs. 3.685” 1.567” 5.252” 5.978” 1.200” 4.100” 5.725” 1.980” 2.730” 2.200”

SU-3XL 1” 3,300 11.25 lbs. 5.335” 1.865” 7.200” 7.970” 1.260” 4.870” 6.520” 2.775” 3.600” 3.172”

SU-6XL 1-1/2” 6,000 17.20 lbs. 5.460” 2.150” 7.610” 8.410” 1.953” 6.250” 7.850” 3.000” 4.475” 3.501”

SU-11XL 1-1/2” 11,300 29.90 lbs. 6.500” 2.245” 8.745” 9.500” 2.062” 7.375” 9.125” 3.900” 5.350” 4.982”

SU-20XL 2-1/2” 20,100 62.00 lbs. 7.525” 3.460” 10.375” 11.600” 3.000” 9.184” 10.784” 4.950” 7.450” 5.557”

SU-30XL 2-1/2” 30,200 75.00 lbs. 7.525 3.460” 10.875” 11.725” 3.125” 9.777” 11.377” 5.875” 8.375” 5.555”

*Weight includes tool, reaction member, and square drive.

W2

W1

W3

360º

360º

SU-XL SERIESRatchet Wrench

SU-XL Square Max. Ft. Lbs. Weight* Reaction Length Length Length Radius Height Height Width Width WidthSeries Drive @10,000 p.s.i. Area - RA L1 L2 L3 R H1 H2 W1 W2 W3

SU-45 2-1/2” 46,200 145.00 lbs. 7.425” 7.337” 12.537” 13.312” 3.000” 11.000” 12.600” 5.750” 8.250” 5.500”

SU-60 2-1/2” 60,000 295.00 lbs. 8.781” 5.887” 14.668” 16.000” 3.750” 14.000” 15.600” 7.250” 9.750” 5.750”

*Steel Casting

H1

R

L1

L2

RA

L3

H2


Reaction Pad - Reacts against either theTop Drive bonnet window opening or theCompressor crosshead structure.


360 Swivel Fittings (Patented) -Allows hose movement without hosebinding. Stainless steel with fewer movingparts..

Light/Ergonomic - Reduces operatorfatigue. Tool can also be used with anoverhead spring balancer, which allows youto set the tool as light as 1 pound.

Calibrated - Every tool is tested andcalibrated to ± .03 accuracy, traceable toN.I.S.T.

JN-SERIESHydraulic Wrench

JN-Series Top Drive Packing Nut Wrench JN-Series Hydraulic Jam Nut Wrench

Our patented JN-Series Hydraulic Wrench is designed specifically for Fast, Safe and Accurate tighteningor loosening of Top Drive Packing Nuts and Gas Compressor Piston Rod Crosshead Jam Nuts. However,with use of one of our innovative, in-house specialty adapters/inserts, the wrench can be used to turnany nut that faces the problem of having a shaft, rod or tube running through its center. The Torq/Lite®

JN-Series hydraulic wrench features a patented "split-head" design, enabling the tool to fit over thewash pipe or piston rod and around your packing nut or jam nut. Our standard JN-Series wrenchcapacity ranges from 100 to 32,000 foot pounds of torque using a standard bi-directional 10,000 p.s.i.hydraulic pump.

Patented “Split-Head” Design - The “split-head” itself or through use of a special madeadapter/insert can fit any size or type Top DrivePacking Nut, OEM Jam Nut, hex or any otherconfiguration. This eliminates the need for expensiveafter market nuts while also giving you never beforeAccuracy, Speed and Safety!!!

Fast - The patented “split-head” design can beplaced around the wash pipe, piston rod or anyother type of shaft, rod, pipe or tube and on thenut or adapter/insert in less than one minute.Accurate tightening or loosening of the jam nutis easily achieved in just a few seconds!

Safe - The JN-Series Hydraulic Wrench eliminatesunsafe hammer wrenches, hydraulic jacks or cranes,and other unsafe equipment currently being usedto turn these nuts.

Accurate - This fast hydraulic wrench, designedspecifically to deal with Top Drive Packing Nutsand Crosshead Jam Nuts, provides accuracy to± .03 with the use of a standard bi-directional10,000 p.s.i. hydraulic pump.

Functional - The JN-Series hydraulic wrenchwill work equally well in either Top Drive bonnetassemblies or either compressor crossheadaccess ports. It will work right-side up orupside-down, sideways, etc…for bothloosening and tightening. GUARANTEED FOR LIFE

Bi-directional pivot allows “Split-Head” to opentwo ways!

JNFR05

JN-10 8,400 10.659” 7.014” 1.950” 5.000” 3.900” 3-3/8” to 4-5/8” 28 lbs.

JN-20 20,100 14.056” 9.117” 1.950” 7.372” 5.000” 4-5/8” to 6” 40 lbs.

JN-30 32,000 16.000” 10.446” 1.950” 8.825” 6.750” 6” to 8-1/4” 57 lbs.

3” - 5 Lug Top Nut JN-10-5 Top JN-10 4-5/8” 9-7/8” 3” 4-3/8” 18 lbs.

3” - 5 Lug Box Packing Nut JN-10-5 Bottom JN-10 4-5/8” 9-7/8” 7-1/4” 8-5/8” 15 lbs.

3” - 6 Lug Top Nut JN-10-6 Top JN-10 4-5/8” 9-7/8” 3” 4-3/8” 18 lbs.

3” - 6 Lug Box Packing Nut JN-10-6 Bottom JN-10 4-5/8” 9-7/8” 7-1/4” 8-5/8” 15 lbs.

4” - 5 Lug Top Nut JN-20-5 Top JN-20 6” 12-1/8” 3” 4-3/8” 23 lbs.

4” - 5 Lug Box Packing Nut JN-20-5 Bottom JN-20 6” 12-1/8” 7-1/4” 8-5/8” 19 lbs.

4” - 6 Lug Top Nut JN-20-6 Top JN-20 6” 11-1/4” 3” 4-3/8” 18 lbs.

4” - 6 Lug Box Packing Nut JN-20-6 Bottom JN-20 6” 11-1/4” 7-1/4” 8-5/8” 17 lbs.


(504) 394-1400 Phone 877-777-4046(504) 394-0404 Fax 877-777-4048

Compressor Crosshead Jam Nutsand Top Drive Packing Nuts

Hei

gh

t

Length

Width

JN Max. Ft. Lbs. Length Height Width Radial Shaft/Rod “Split-Head” WeightSeries @ 10,000 p.s.i. Clearance Clearance Range with head

RadialClearance

Wash Pipe JN Series JN Series Adapter Adapter Adapter Height AdapterAssembly Adapter “split-head” O.D. Height with Hex Weight

Shaft / RodClearance

Manufactured by:

JNSR05

JN-SERIESHydraulic Wrench


RISER TOOLPACKAGE

Phone 877-777-4046 • Fax 877-777-4048

Overhead Balancers - Virtually eliminates theweight of riser tool which reduces operator fatigueand increases efficiency of operation.

Sockets – 2-1/2“ Square Drive - We carry allstandard size sockets in stock and can modifysockets in-house to fit your particular application .

RT-Series Riser ToolsRT-16: Torque capacity to 18,300 ft. lbs.RT-24: Torque capacity to 28,900 ft. lbs.RT-40: Torque capacity to 42,300 ft. lbs.

Dual Control Console - Custom built aluminumconversion console, utilizes rig hydraulics up to3,000 p.s.i. and provides continuous volume ofhydraulic fluid required to independently operatetwo riser tools simultaneously.

Aluminum Oil Bath Storage ContainersDivided and compartmentalized for storage andsubmerging of riser tools with self-standinglockable lids.

The RT-Series riser tool package consists of riser tools, overhead balancers, dual control console, sockets,and aluminum oil bath storage containers. The RT-Series riser tools are the Simplest, Fastest and Safestmethod to make-up or break-out any flange bolted marine sub-sea riser.

Dual Control Console

Riser Tool with Socket

Overhead Balancer

Aluminum Oil BathStorage Container

1914 Engineers Road • Belle Chasse, Louisiana USA 70037RTPFR03

RISER TOOLPACKAGE


(504) 394-1400 Phone 877-777-4046(504) 394-0404 Fax 877-777-4048

Dual Control Console

DCC 16/24 3000 psi 10 GPM of 90 psi (2) (4) 30 ft. X 3/8” 158 lbs. 23” 27.5” 24”Rig Hydraulics 20 cfm Push Button 5000 psi WP

DCC 40 3000 psi 20 GPM of 90 psi (2) (4) 30 ft. X 1/2” 206 lbs. 23” 27.5” 24”Rig Hydraulics 20 cfm Push Button 5000 psi WP

Model Max. Hydraulic Fluid Air Control Hydraulic Weight Width Length HeightOutput Capacity Requirement Hoses w/Hoses

76.5” 83” 39.75” 26.5” 23.75” 150 lbs.

Length Length Width Height Inside Depth Weightw/eyelifts w/Lid

Compartmentalized Aluminum Oil Bath Storage Container

39.75”

26

.5” 76.5

”

23

.75

”

83”

27.5”

24

”

23”

Overhead Balancer

1” diameter opening

LW

16B125/24B125 5 ft. 8” 9.5” 16” min. 220-275 lbs 39 lbs.

40B170 5 ft. 8” 11” 24” 308-375 lbs 62 lbs.

Model Cable Length Width Height Capacity WeightTravel Total

H

RTPSR03


POWERCONSOLES

CUSTOMHydraulic


Torq/Lite® manufactures custom built consoles for improved tool speed or special applications.These air powered units are a perfect solution when speed of operation is a primary factor. Ourcustom built, air/hydraulic units deliver constant high volumes at the full range of pressure, 0 to10,000 p.s.i. This translates into tool speeds 3 to 5 times that achieved with standard hydraulicpower consoles.

Custom Source Requirements Width Length Height GaugesConsoles

All Models Pneumatic 90 psi @ 150 cfm 24” 24” 24” 3” Glycerin Filled (Air & Hydraulic)

Console Maximum Maximum Reservoir Weight ControlModel # Output Oil Flow with Oil

CAHC-3 3,000 psi 7.5 Gals. per minute 9 U.S. Gals 260 lbs. Push Button; 30’ Hose



PCCHR03

POWERCONSOLES



(504) 394-1400 Phone 877-777-4046(504) 394-0404 Fax 877-777-4048

Console Maximum Source Requirements Maximum Weight Reservoir Valve Width Length HeightModel # Output Oil Flow with Oil

Torq/Lite® offers a variety of hydraulic power consoles. Our standard hydraulic consoles are availablewith electric (specify electrical requirements) or air power. Both formats are torque wrench powerconsoles which include fast two speed design with higher crossover, auto dump to relieve all pressurefrom hoses, complete with p.s.i./bar pressure gauge and polarized couplers, quick-connect no dripcouplers with safety locking collar, and operate double acting cylinders. The electric power console isideal for use with long extension cords. It is perfect for larger wrenches and heavy duty jobs, and hasa powerful permanent magnet motor which starts at full load and runs on as little as 60 VAC. The airpower console is used in hazardous environments and is a perfect alternative when electric servicesare prohibited or unavailable. It is rated for continuous duty and has an external filter and roll bar.Either power console is an economical and efficient way to operate our hydraulic torque wrenches.

Electric/Hydraulic 1.5HP Air/Hydraulic 1.5HP

SEHC 10,000 psi Electric 115 VAC 400 cu.in./min. 80 lbs. 1 gal. Control: Solenoid with 7-7/8” 11-5/16” 18-9/16”10-2041 .5 HP hand pendant

Type: 4 Way/3 Position

SEHC-10 10,000 psi Electric 115 VAC 400 cu.in./min. 95 lbs. 2 gals. Control: Solenoid with 12-1/4” 12-1/4” 19-1/32”1.5 HP hand pendant


SAHC-10 10,000 psi Pneumatic 50 cfm/90 psi 400 cu.in./min. 100 lbs. 2 gals. Control: Solenoid with 16-3/4” 25-7/16” 20-1/2”1.5 HP hand pendant


Electric/Hydraulic .5HP

PCSHR04

STANDARDHydraulic

http://www.torqlite.com

Torqlite

Documents

Transcript of Torqlite