Tornilleria petroquimica nuclear..pdf
Transcript of Tornilleria petroquimica nuclear..pdf
TORNIMASA SISTEMAS DE FIJACIONES S.L.U. SPECIAL BOLTS AND NUTS NEW MATERIALS ARE MORE AND MORE REQUIRED, TOGETHER WITH THE TRADITIONAL ONES, HAVING HIGH QUALITIES SUCH AS TORNIMASA 04/02/2013
Web: www.tornimasa.com e-mail: mailto:[email protected]
ASTM British
Standard UNS W.Nr.
600 INMONEL®
B166 3073 N06600 2.4816
PROPERTIES – Excellent resistance to oxidizing and reducing environments as well as to severely Corrosive evironments at elevated temperature. MAIN APPLICATIONS - Furnaces, heat treating equipment, chemical, textile and food processing Equipment.
ASTM British
Standard UNS W.Nr.
400 MONEL®
B164 3074 N04400 2.4360
PROPERTIES – High strength, good weld ability, perfects corrosion strength over range Of temperatures and conditions /sea water, mineral and organic acids). MAIN APPLICATIONS - Valves, pumps, shafts, marine fixtures, petrochemical plants and steam Systems, heat exchangers, uses in contact with sulphuric and hydrofluoric acids.
ASTM British
Standard UNS W.Nr.
K500 MONEL®
- 3072 N05500 2.4375
PROPERTIES – Higher mechanical strength and abrasion resistance than MONEL®400Alloy (obtained through artificial aging). MAIN APPLICATIONS - Valves, pumps, shafts, petrochemical plants , fasteners.
ASTM British
Standard UNS W.Nr.
625 INMONEL®
B446 3076 N06625 2.4856
PROPERTIES – High mechanical strength from cryogenic temperatures to very high temperatures (1100˚C). Excellent fatigue strength and oxidation resistance. MAIN APPLICATIONS - Chemical and pollution control industry, marine equipment, ducts and Valves.
ASTM British
Standard UNS W.Nr.
800 INCOLOY®
B408 3076 N08810 1.4876
PROPERTIES – Resistant to oxidation and to carburization at elevated temperatures (up to 1100˚C). Resistant to sculpture attack, to corrosion and to scaling. MAIN APPLICATIONS - Heat exchangers, heating units, steam generators.
Web: www.tornimasa.com e-mail: mailto:[email protected]
ASTM British
Standard UNS W.Nr.
825 INCOLOY®
B425 3076 N08825 2.4858
PROPERTIES – Excellent resistance to cracks caused by strees-corrosion, to pitting and to corro- Sion by acids and alkalis in both oxidizing and reducing conditions. MAIN APPLICATIONS - Pickling tanks, chemical industry, pollution control systems.
ASTM British
Standard UNS W.Nr.
C276 HASTELLOY®
B574 - N10276 2.4819
PROPERTIES – Exceptional corrosion strength in reducing and oxidizing environments, to Stress-corrosion cracking and to pitting up to 1038˚. MAIN APPLICATIONS - Employed in environments with the severest chemical processing, in Paper manufacturing industry and in pollution control industry.
ASTM British
Standard UNS W.Nr.
2205 DUPLEX®
A182-F51 - S31803 1.4462
PROPERTIES – Very high resistance to cracking by stress-corrosion in the presence of chemicals Containing chloride and to intercrystalline corrosion. MAIN APPLICATIONS - Chemical and oil industry, piping’s, flanges, valves, fitting, for uses at high temperatures.
ASTM British
Standard UNS W.Nr.
32760 SUPER DUPLEX®
A276 - S32760 1.4496
PROPERTIES – Perfect resistance to interstitial corrosion and to stress-corrosion cracking in corrosive environments. MAIN APPLICATIONS - Marine, fixtures, petrochemical plants.
ASTM British
Standard UNS W.Nr.
Ti Gr.1 TITANIUM
B348 - R50250 3.7025
Ti Gr.2 TITANIUM
B348 - R50400 3.7035
Ti Gr.5 TITANIUM
B348 - R56400 3.7165
Ti Gr.7 TITANIUM
B348 - R52400 3.7235
PROPERTIES – Very good strength-to-weight ratio, excellent corrosion strength in sea and acid environment, exceptional wear resistance and high capacity of heat transfer. MAIN APPLICATIONS - Electro-chemical industry, marine equipment, desalination plants, paper manufacturing industry, condensers and heat exchangers.
Web: www.tornimasa.com e-mail: mailto:[email protected]
AISI ASTM British
Standard UNS W.Nr.
660 - A453 - S66286 1.4980
PROPERTIES – Good mechanical strength and excellent for use at high temperatures. MAIN APPLICATIONS - Fasteners for containers under pressure, flanges.
AISI ASTM British
Standard UNS W.Nr.
B5 505 A193 - S50100 1.7362
PROPERTIES - For use at high temperature conditions. MAIN APPLICATIONS - Petrochemical industry, valves, flanges.
AISI ASTM British
Standard UNS W.Nr.
B6 410 A193 410S21 S41000 1.4006
PROPERTIES – Good resistance in medium corrosive environmemt (crude oil, petrol, organic acids, organic solvents, ammonia) but not in highly corrosive ones. Good resistance to hot oxidation up to hot oxidation up maximum temperature of 650˚C, good weld ability. MAIN APPLICATIONS - Petrochemical industry, valves, pumps, taps and fittings.
AISI ASTM British
Standard UNS W.Nr.
B7 4140 A193 708A42 G41400 1.7225
PROPERTIES – Good resistance and toughness, very good for uses at high temperature conditions (-10˚C/+427˚C). MAIN APPLICATIONS - Petrochemical industry, valves, pumps, heat exchangers.
AISI ASTM British
Standard UNS W.Nr.
B7M 4140 A193 708A42 G41400 1.7225
PROPERTIES – Similar to B7 steel but marked by lower mechanical strength. MAIN APPLICATIONS - Petrochemical industry.
Web: www.tornimasa.com e-mail: mailto:[email protected]
AISI ASTM British
Standard UNS W.Nr.
B16 - A193 - K14072 1.7711
PROPERTIES – It keeps good resistance and toughness in environment at very high temperature (-10˚C/+558˚C). MAIN APPLICATIONS - Petrochemical industry.
AISI ASTM British
Standard UNS W.Nr.
B8 304 A193 304S15 S30400 1.4301
PROPERTIES – Used for temperatures included between -196˚C and +538˚C. Good resistance to inter crystalline corrosion, to pitting even in the presence of reducing acids and of chlorine ions and to hot oxidation. Excellent weld ability. MAIN APPLICATIONS - Petrochemical, chemical, pharmaceutical industry, food industry, shipbuilding industry, carpentry in general.
AISI ASTM British
Standard UNS W.Nr.
B8 304 A320 - S30400 1.4301
PROPERTIES – Good corrosion strength. Suitable for uses at low temperatures (-254˚C/+50˚C) MAIN APPLICATIONS - Chemical, pharmaceutical and food industry.
AISI ASTM British
Standard UNS W.Nr.
B8M 316 A193 S316S17 S31600 1.4401
PROPERTIES – Good corrosion strength. Suitable for uses at low temperatures (-254˚C/+50˚C) MAIN APPLICATIONS - Chemical, pharmaceutical and food industry.
AISI ASTM British
Standard UNS W.Nr.
B8M 316 A320 - S31600 1.4401
PROPERTIES – Good corrosion strength. Suitable for uses at low temperatures (-196˚C/+50˚C) MAIN APPLICATIONS - Chemical, pharmaceutical and food industry.
Web: www.tornimasa.com e-mail: mailto:[email protected]
AISI ASTM British
Standard UNS W.Nr.
B8C 347 A193 347S17 S34700 1.4550
PROPERTIES – High resistance to hot oxidation and to intergranular corrosion. Used for temperatures between -196˚C/+538˚C. MAIN APPLICATIONS – Petrochemical industry, heat exchangers, construction of welded structures for chemical plants.
AISI ASTM British
Standard UNS W.Nr.
B8C 347 A320 - S34700 1.4550
PROPERTIES – Good corrosion strength. Suitable for uses at low temperatures (-254˚C/+50˚C). MAIN APPLICATIONS – Petrochemical and chemical industry.
AISI ASTM British
Standard UNS W.Nr.
B8T 321 A193 321S18 S32100 1.4541
PROPERTIES – Used in the field of temperatures included between -196˚C/+538˚C. High resistance to intergranular corrosion due to the presence of Titanium. Good weld ability without any further heat treatment. MAIN APPLICATIONS – Petrochemical, chemical and food industry, power stations.
AISI ASTM British
Standard UNS W.Nr.
B8T 321 A320 - S32100 1.4541
PROPERTIES – Used in the field of low temperatures between -196˚C/+50˚C. Good corrosion strength. MAIN APPLICATIONS – Petrochemical and chemical industry.
AISI ASTM British
Standard UNS W.Nr.
L7 4140 A320 708A42 G41400 1.7225
PROPERTIES – Good resistance and toughness, excellent for uses at low temperature (-101˚C/+50˚C). MAIN APPLICATIONS – Petrochemical industry.
Web: www.tornimasa.com e-mail: mailto:[email protected]
AISI ASTM British
Standard UNS W.Nr.
L7M 4140 A320 708A42 G41400 1.7225
PROPERTIES – Similar to L7 steel but marked by lower mechanical strength. MAIN APPLICATIONS – Petrochemical industry.
AISI ASTM British
Standard UNS W.Nr.
L43 4340 A320 817A37 G43400 1.6565
PROPERTIES – Suitable for the execution of large-sized parts which are highly stressed and with use at low temperatures between (-101˚C/+50˚C). MAIN APPLICATIONS – Petrochemical industry.
AND MOREOVER:
STAINLESS STEEL AISI 309-310-329
STAINLESS STEEL SERIES 400
NIMONIC®- NITRONIC®- CARPENTER®
254 – SM0 – SAF2507
ALUMINIUM-BRONZE
PHOSPHOROUS-BRONZE
ALUMINIUM AND DERIVATIVES
TEFLON®- NYLON®- DELRIN®- PVC
P.T.F.E.®- PTCFE - MOPLEN®-
ARNITE®
Web: www.tornimasa.com e-mail: mailto:[email protected]
NEW REQUIREMENTS NEW TECHNOLOGIES NEW MATERIALS
TORNIMASA® Sistemas de fijaciones s.l.u.
Pol.Ind. Daimiel Sur, C/ Investigacion Nave
20 13250 Daimiel (CIUDAD REAL )Spain
Fax: 0034 879613 Movil: 0034 669870002