Covariance Analysis for Deep-Space Satellites with Radar and
Topic 26: Analysis of Covariance. Outline One-way analysis of covariance –Data –Model...
-
Upload
dortha-howard -
Category
Documents
-
view
237 -
download
1
Transcript of Topic 26: Analysis of Covariance. Outline One-way analysis of covariance –Data –Model...
Topic 26: Analysis of Covariance
Outline
• One-way analysis of covariance
–Data
–Model
– Inference
–Diagnostics and rememdies
• Multifactor analysis of covariance
Data for One-Way ANCOVA
• Yij is the jth observation on the response variable in the ith group
• Xij is the jth observation on the covariate in the ith group
• i = 1, . . . , r levels (groups) of factor
• j = 1, . . . , ni observations for level i
KNNL Example (pg 927)
• Y is cases of crackers sold during promotion period
• Factor is the type of promotion (r=3)– Customers sample crackers in store– Additional shelf space– Special display shelves
• ni=5 different stores per type
• The covariate X is the number of cases of crackers sold at the store in the preceding period
Data
data a1; infile 'c:\...\CH22TA01.DAT'; input cases last trt store;proc print data=a1; run;
Output
Obs cases last trt store 1 38 21 1 1 2 39 26 1 2 3 36 22 1 3 4 45 28 1 4 5 33 19 1 5 6 43 34 2 1 7 38 26 2 2
Output
Obs cases last trt store 8 38 29 2 3 9 27 18 2 410 34 25 2 511 24 23 3 112 32 29 3 213 31 30 3 314 21 16 3 415 28 29 3 5
Plot the data
title1 'Plot of the data';symbol1 v='1' i=none c=black;symbol2 v='2' i=none c=black;symbol3 v='3' i=none c=black;proc gplot data=a1; plot cases*last=trt/frame;run;
Background
• Covariates are sometimes called concomitant variables
• Covariates should be related to the response variable
• Covariates should not be affected by the treatment variable (factor)
• Often they are some kind of baseline or pretest value
Basic ideas• A covariate can reduce the MSE,
thereby increasing power
• A covariate can adjust for differences in characteristics of subjects in the treatment groups
• We assume that the covariate will be linearly related to the response and that the relationship will be the same for all levels of the factor. Similar to comparing regression lines.
Cell Means Model for one-way ancova
•
– the ij are iid N(0, σ2)
–Yij ~N( , σ2) and indep
• For each i, we have a simple linear regression
• The slopes are the same
• The intercepts can be different
ijijiij )XX(Y ..
)XX( .. iji
Plot of the data with lines
title1 'Plot of the data with lines';symbol1 v='1' i=rl c=black;symbol2 v='2' i=rl c=black;symbol3 v='3' i=rl c=black;proc gplot data=a1; plot cases*last=trt/frame;run;
Parameters
• The parameters of the model are
–μi for i = 1 to r
–β
–σ2
Estimates
• We use multiple regression methods to estimate the μi and β
• We use the residuals from the model to estimate σ2
• The estimate is s2 (equal to the MSE)
Factor Effects Model for one way anova
•
– the ij are iid N(0, σ2)
• The usual constraints are = 0
• Proc glm sets αr= 0
ij..ijiij )XX(Y
Interpretation of model
• Expected value of a Y with level i and Xij=x is
• Expected value of a Y with level i´ and Xij=x is
• The difference is i - i´
• Note that this difference does not depend on the value of x (due to assumption of constant slopes)
)XX( .. i
)XX( .. i
Proc glm
proc glm data=a1; class trt; model cases=last trt;run;
Model output
Source DF MS F PModel 3 202.60 57.78 .0001Error 11 3.50Total 14
Anova table output
Type I Source DF SS MS F Plast 1 190 190 54.38 <.0001trt 2 417 208 59.48 <.0001
Type III Source DF SS MS F Plast 1 269 269 76.72 <.0001trt 2 417 208 59.48 <.0001
Type I vs Type III• Because X for covariate is not
orthogonal (like indep argument before) to X’s for factor
–Order that the X are fit makes a difference. Want to compare means after adjusting for covariate
–General rule to use Type III SS when Type I and III SS differ
Parameter Estimates
proc glm data=a1; class trt; model cases=last trt /solution;run;
Output
Par Est SE t PInt 4.37 B 2.73 1.60 0.1381last 0.89 0.10 8.76 <.0001trt1 12.9 B 1.20 10.76 <.0001trt2 7.9 B 1.18 6.65 <.0001trt3 0.0 B
Common slope is 0.89
Interpretation• Expected value of Y with level i of factor
A and X=x is
• So is the expected value of Y when X is equal to the average covariate value
• This is usually the level of X where the trt means are calculated and compared
• Need to make sure this level of X is reasonable for each level of the factor
)XX( .. i
i ˆˆ
LSMEANS
• The L(least)S(square) means can be used to obtain these estimates – All other categorical values are set at an
equal mix for all levels (I.e., average over the other factors)
– All continuous values are set at the overall mean
• These are similar to subpopulation mean estimates
Intepretation for KNNL example
• Y is cases of crackers sold under a particular promotion scenario
• X is the cases of crackers sold during the last period
• The LSMEANS are the estimated cases of crackers that would be sold for a store with the ave number of crackers sold during the last period
LSMEANS Statement
proc glm data=a1; class trt; model cases=last trt; lsmeans trt/ stderr tdiff pdiff cl;run;
Output
treat LSMEAN SE P1 39.8 0.8 <.0001 2 34.7 0.8 <.0001 3 26.8 0.8 <.0001
OutputLeast Squares Means for Effect treat t for H0: LSMean(i)=LSMean(j) / Pr > |t| Dependent Variable: cases
i/j 1 2 31 4.129808 10.76359 0.0017 <.00012 -4.12981 6.646871 0.0017 <.00013 -10.7636 -6.64687 <.0001 <.0001
Output
treat LSMEAN 95% CL1 39.8 37.9 41.72 34.7 32.8 36.63 26.8 24.9 28.6
Output
Difference Between 95% CL fori j Means LSM(i)-LSM(j)1 2 5.0 2.3 7.71 3 12.9 10.3 15.62 3 7.9 5.2 10.5
Prep data for plot
title1 'Plot of the data with the model';proc glm data=a1; class trt; model cases=last trt; output out=a2 p=pred;
Prep data for plot
data a3; set a2; drop cases pred; if trt eq 1 then do cases1=cases; pred1=pred; output; end;
Prep data for plot if treat eq 2 then do cases2=cases; pred2=pred; output; end; if treat eq 3 then do cases3=cases; pred3=pred; output; end;proc print data=a3; run;
Code for plotsymbol1 v='1' i=none c=black;symbol2 v='2' i=none c=black;symbol3 v='3' i=none c=black;symbol4 v=none i=rl c=black;symbol5 v=none i=rl c=black;symbol6 v=none i=rl c=black;proc gplot data=a3; plot (cases1 cases2 cases3 pred1 pred2 pred3) *last/frame overlay;run;
Check for equality of slopes
title1 'Check for equal slopes';proc glm data=a1; class trt; model cases=last trt last*trt;run;
OutputType ISource DF F Plast 1 54.44 <.0001treat 2 59.55 <.0001last*treat 2 1.01 0.4032
Type III Source DF F Plast 1 69.42 <.0001treat 2 0.18 0.8379last*treat 2 1.01 0.4032
Diagnostics and remedies
• Examine the data and residuals
• Look for outliers that are influential
• Transform if needed, consider Box-Cox
• Examine variances (standard deviations)
–Use a BY statement and look at the MSE
Last slide
• Read KNNL Ch 22
• We used topic26.sas to generate the output for today