Tools and Materials List for the Flying C Fishing Lure

1
Tools and Materials List For the Flying C Fishing Lure Materials 0.4mm (0.016”) Off cut of brass or copper sheet 0.8mm (0.030”) Stainless steel spinner wire or wig welding wire Drilled fishing weight to suit Heat shrink or silicone tubing 8mm Plastic bead 3mm Glass Bead Size 6 Treble Hook Tools Standard pliers Snipe nosed pliers Side or wire cutters Jewellery pliers, round-nose or cir clip pliers Kitchen Scissors Craft knife 2mm (1/16”) Panel pin with the point cut off and ground flat to use as punch Ball and Pein hammer Desert Spoon Block of hardwood for use with punch Paper Glue Nail file or sandpaper 1mm (0.040”) Wire to bend clevis round

description

A list of tools and materials to accompany the Youtube Video on making a Flying C Fishing Lure

Transcript of Tools and Materials List for the Flying C Fishing Lure

Page 1: Tools and Materials List for the Flying C Fishing Lure

Tools and Materials List For the Flying C Fishing Lure

Materials

0.4mm (0.016”) Off cut of brass or copper sheet

0.8mm (0.030”) Stainless steel spinner wire or wig welding wire

Drilled fishing weight to suit

Heat shrink or silicone tubing

8mm Plastic bead

3mm Glass Bead

Size 6 Treble Hook

Tools

Standard pliers

Snipe nosed pliers

Side or wire cutters

Jewellery pliers, round-nose or cir clip pliers

Kitchen Scissors

Craft knife

2mm (1/16”) Panel pin with the point cut off and ground flat to use as punch

Ball and Pein hammer

Desert Spoon

Block of hardwood for use with punch

Paper Glue

Nail file or sandpaper

1mm (0.040”) Wire to bend clevis round