Toolmaking, special parts & prototype production
Transcript of Toolmaking, special parts & prototype production
Screw connections | Fastening technology
www.schmid-screw.com
Toolmaking,special parts &prototype production
03/2021
T +43 (0) 2764 265 20
Productive power "made by Schmid" The fact that your products have special value starts with the fact that you
have special ideas in your production. Ideas that we implement for you pre-
cisely and to a high standard in terms of technology.
TOP AdviceIn the beginning, there is a necessity. Then an idea. Then a sketch and at
some point a precise construction drawing. Wherever you stand: We pick
you up right there.
We discuss your ideas or wishes with you, and not only as a toolmaker.
We work together with you as production optimisers. After all, that is what
it's all about.
TOP TechnologyWhether an individual piece or small series production. At Schmid Schrau-
ben, we combine flexibility with quality. We produce everything for you
using 5-axis milling centres. This means that we manufacture not only pre-
cisely to the most diverse requirements, but also with short delivery times.
TOP QualityCompetently planned and designed, manufactured from first-class materi-
als on modern equipment: What Schmid Schrauben produces works.
CompetentMilling, turning, eroding, grinding, honing, tempering: Our metalworking
capabilities are wide-ranging and technologically state-of-the-art. This
means: all possibilities in the design. And economic conditions in the real-
isation.
Functionally reliableSchmid Schrauben guarantees you the greatest possible security for
your innovation and investment: Technological security through our ac-
companying experience and personal advice. Cost and functional reliabil-
ity through thorough simulation and sophisticated prototypes before final
production.
WHY are we so acutely aware of the value of
process-optimised tools and parts in our custom manufactur-
ing at Schmid Schrauben?
40 years of experience in the development of tools, special parts, and prototypesCreative access | Technologically up to date | Economically superior.
BECAUSE we know from our series production what seamlessly integrated processes are worth.
PracticalityFrom engineering to the finished component, from fastening technology
to moulded parts and complex tools: Prototypes or initial samples from
Schmid Schrauben are sophisticated, down to the last detail. Ready to
provide hard data in the test for final optimisation. For less risk and more
predictability in your production.
Plant powerWith modern equipment including
5-axis milling centres, we combine
grown expertise in development
with the latest production technol-
ogy. For individual pieces as well
as for small series. For example,
the connected pallet loader of our
Hermle C22 U milling centre allows
highly efficient and economical
production. Thanks to a "zero point
clamping system", workpieces can
be directly further processed in
the same clamping device on our
die-sinking EDM machines. The
system immediately reports any
exceedance of the tolerance.
3D - PrintingWhere the possibilities of con-
ventional production end, we offer
additional production possibilities
with our 3D printers for metal and
plastic.
Metal printing is perfectly suited for
the production of complex metallic
individual parts, and also for pro-
totypes as a preliminary stage to
series production at our plant.
We offer the printing of transferred
components on the one hand, and
component optimization and rede-
sign on the other. We are happy to
prepare your 3D file for 3D printing.
Process-OptimisedMechanical quality and resilience is one thing. The optimal embedding of a
tool in your production process is another. It is this often what determines
the economic efficiency of a tool. Together, we consistently aim to accel-
erate or save entire work processes.
www.schmid-screw.com
Milling Hermle C20 U Hermle C22 U MH500 E2 Maho 800
NC swivel rotary table Ø 280 mm Ø 320 mm 800 x 360 mm 1050 x 620 mm
Table load 300 kg 300 kg 200 kg
X axis 450 mm 450 mm 500 mm 800 mm
Y axis 450 mm 600 mm 400 mm 500 mm
Z axis 450 mm 330 mm 350 mm 600 mm
Honing ML-2000
Manual stroke: 1.5 - 165 mm
Dimension range Automatic stroke: 1.5 - 101 mm
Stroke length: 6.0 - 170 mm
Sink erosion Agie Innovation Agie Integral
Table size 300 x 400 mm 300 x 400 mm
Surface grinding Elb SWH4NDElb Orion 1052 NPC-K
Table size 200 x 450 mm 500 x 1000 mm
Cylindrical grinding Kellenberger
Centre height 175 mm
Peak width 1000 mm
Grinding diameter max. 349 mm
Workpiece weight between tips max. 80 kg
Turning Okuma LT-200 Hamlet E40 D3
Turning length 600 mm 1000 mm
Swing diameter 210 mm 435 mm
Passage in draft tube max.65 mm 66 mm
Tempering (hardening and tempering)
K3/1200C/S B200/LG
Useful dimensions w x h x d 400 x 300 x 600 mm
520 x 600 x 650 mm
max. temperature 1300°C 900°C
3D - Printing3D Systems -
DMP Flex 350Ultimaker S5
Component size 275 x 275 x 380
mm
330 x 240 x 300
mm
Schmid Schrauben Hainfeld GmbH | Landstal 10 | 3170 Hainfeld
T +43 (0)2764 2652 | F +43 (0)2764 3149 | E [email protected]
www.schmid-screw.com03/2021
Special hardeningOur screws are viscoplastic and bendable by at least 45° - elastic and high-strength.
Your screw - Your brandWe manufacture screws exactly according to your wishes.
Always availableOur warehouse is always stocked with our extensive range.
Safety Our screws are approved according to ETA 12/0373.
Highest qualityWe manufacture according to ISO 9001.
SustainabilityWe take care of our envi-ronment and manufacture according to ISO 14001 and ISO 50001.
StaticOur screws have above-average mechani-cal values for pull-out and head pull-through.
Service orientationWhether with calculations,expertise or experience - we are there for our customers.
ExperienceWe have been specialists in the manufacture of wood construction screws for over 175 years.