Tone · Tone and Sustainable Design GREENGUARD Indoor Air Quality Certified A natural extension of...
Transcript of Tone · Tone and Sustainable Design GREENGUARD Indoor Air Quality Certified A natural extension of...
PLTN0319 © Knoll, Inc. All rights reserved.Printed in the United States on paper that contains
50% recycled content and 15% post consumer waste.
Knoll, Inc.P.O. Box 1571235 Water StreetEast Greenville, PA 18041
knoll.com
Price ListMarch 2019
Tone
Table of Contents
Introduction Knoll and Sustainable Design 2Tone and Sustainable Design 3Finish Options 4Tone Height-Adjustable Tables 6
Bases Standard Electric 7Extended Electric 13Handcrank 17Extended Handcrank 19Pin-Set 21Fixed Height 23
Tops Antenna Workspaces Worksurfaces 25AutoStrada Worksurfaces 26Dividends Horizon Worksurfaces 27Morrison Worksurfaces 29Reff Profiles Worksurfaces 30
Accessories Accessories 31
Alpha-Numeric Index 33
Selling Policy 35
General Ordering Information 37
Tone Height Adjustable Tables
PLTN02191
Copyright � 2019 Knoll, Inc.All rights reserved.All prices effective 03/15/2019.
Knoll and Sustainable Design
Each year Knoll sets key initiatives in our journey to sustainability. We are members of a global consortium on energy, have adopted ascientific, metrics-based approach to sustainable product design, and maintain a leadership position in establishing universal,verifiable, sustainability standards for our industry.
Knoll promotes independent third-party certification because it provides the most impartial and trustworthy foundation for industry-wideenvironmental compliance. Certification by established and respected third parties ensures that all manufacturers are held to the samehigh standards and that customers can trust a company’s declaration about the environmental benefits of its products. Knoll third-partypartners include: the International Standards Organization (ISO); Forest Stewardship Council (FSC�); Rainforest Alliance;GREENGUARD� Environmental Institute; and The Business and Institutional Furniture Manufacturer’s Association (BIFMA) level�certification from Scientific Certification Systems (SCS).
In addition, Knoll is aligned with the U.S. Green Building Council and can help companies, healthcare organizations and educationalinstitutions achieve Leadership in Energy and Environmental Design (LEED�) workplace certification.
Global Climate Change• Knoll is a sponsor of the Clinton Global Initiative, which brings together a community of global leaders to devise and implement
solutions to some of the world’s most pressing challenges, including environmental change.
• Knoll has a comprehensive Energy Management Program to increase energy efficiency in products and processes.
Life Cycle Assessment (LCA) Tool• Life Cycle Assessment is a science-based measurement of a product’s environmental impacts throughout its life cycle, from raw
materials sourcing through manufacture, shipping, use and re-use or end-of-life. LCA enables cradle-to-cradle implementation ofsustainable practices.
Setting Industry Standards• Knoll partners with MTS (The Institute for Market Transformation to Sustainability) to develop the SMaRT© Consensus Sustainable
Products Standards, a set of consensus-based sustainable product standards based on the LEED� model, for all building products,fabric, apparel, flooring and carpet. MTS, the developer of SMaRT©, is an accredited American National Standards Institute (ANSI)standard developer.
• Knoll also partners with BIFMA (Business and Institutional Furniture Manufacturers Association) to promote level� sustainabilitystandards for the contract furniture industry.
• Knoll has established FSC� (Forest Stewardship Council) certified wood as the standard for general office open plan office systems,casegoods and tables.
• Knoll has launched Full Circle, a resource recovery program developed with ANEW, to help customers extend the life cycle of surplusfurniture, fixtures and equipment (FF&E) in an economically, socially and environmentally responsible manner.
• Our goal is to encourage all manufacturers in the contract furniture industry and related industries to adopt standards that will lead tosustainable products and practices.
For more information about Knoll and sustainable design, visit knoll.com/environment.
2
Tone and Sustainable DesignGREENGUARD Indoor Air Quality Certified�
A natural extension of the Knoll commitment toprotect the biosphere, conserve natural resourcesand reduce waste, Tone Height-Adjustable Tablesare environmentally responsible in manufacturingprocess and materials.
Tone Height-Adjustable Tables areGREENGUARD certified.
Visit GREENGUARD.org for more informationand to find printable certificates for Knollproducts that can be used for verification andLEED submission. GREENGUARD provides theonly guide to certified low-emitting interiorproducts and building materials. Its goal is tohelp building owners and managers, architects,interior designers and product specifiers buildand furnish healthier offices, hospitals, schoolsand homes by providing a register of tested andcertified low-emitting products and materials.
The GREENGUARD Certification Program(formerly known as GREENGUARD Indoor AirQuality Certification) gives assurance thatproducts designed for use in indoor spaces meetstrict chemical emissions limits, which contributeto the creation of healthier interiors. AchievingGREENGUARD Certification gives credence tomanufacturers’ sustainability claims, backingthem with empirical scientific data from anunbiased, third-party organization.
GREENGUARD Certification emissions limitswere first used as purchasing specifications forthe US EPA and the State of Washington forfurniture and commercial building products.GREENGUARD Certification criteria have beenthe basis for the LEED credit for low-emittingfurniture since 2002. Office furniture productsthat are GREENGUARD Certified are alsocompliant with the BIFMA X7.1 standard andBIFMA e3 credit 7.6.1.
Tone environmentally responsible manufacturingprocesses and materials include:
FSC-CertifiedWood components are standard FSC certified withNorth American hardwood veneers.
Recovered ParticleboardTone tops have FSC certified, 90% recoveredparticleboard cores.
VOC-Free FinishesWater-based wood stains and UVcuredpolyurethane wood top coats are virtuallyVOC-free.
VOC-Free AdhesivesWater-based adhesives used to adhere laminateand veneer to substrate are 99% OVC-free.
Recycled SteelRecycled steel bases have 20-25% recycled steelcontent.
3
Finish Options
Base Finish Options
111 Jet Black112 Brown113 Dark Grey114 Folkstone Grey115 Medium Grey116 Sandstone117 Soft Grey611 Beige Mist Metallic612 Medium Metallic Grey613 Silver118 Bright White
Wood FinishesNew codes begin with a three digit numeric sequence, followed by a letter suffix. Each letter suffix (A-F) represents a different combination of pore fill optionsand gloss levels.
Code V1 TECHWOOD
638 Blond Maple628 Dark Mahogany639 Light Cherry641 Black Oak506 Maple509 Cherry512 Medium Walnut513 Medium Teak514 Espresso637 Natural644 Light Walnut645 Dove Grey
Code V2 PREMIUM TECHWOOD
647 White Pine640 Ebony642 Grigio
V2 NATURAL VENEER020 Natural Oak038 Rustic Walnut *017 Light Walnut002 Bronze Cherry006 Maple021 Peacock Green Walnut022 Old English Walnut037 Birch
Code V3 PREMIUM VENEER
039 Pippy Oak *044 Figured Sycamore
Gloss Level Fill LevelA Low Gloss Closed PoreB MediumGloss Closed PoreC High Gloss Closed Pore
D Low Gloss Open PoreE Medium Gloss Open PoreF High Gloss Open Pore
Edge Options for VeneersWOOD Complementary WoodSYN Complementary SyntheticWPLY Wood Ply Edge *SPLY Synthetic Ply Edge *
* Ply Edge available on Birch (037) worksurfaces.
*Note:-Synthetic Edge option is available on worksurfaces, only.-Finishes with * are available on worksurfaces only.For more detailed information on Veneer finishes, please refer to the Wood Finish Matrix on the Knoll.com
Tone Height-Adjustable Tables
4
Finish Options
Laminate Finishes Impact Resistant Laminate
Core LaminateSurface / Edge111 Jet Black**114 Folkstone Grey**115 Medium Grey**117 Soft Grey**118 Bright White**119 Pumice**121 Micro Grey *122 Brushed Sand *123 Brushed Grey *128 Fog**129 Micro Sand **121, 122, 123, 129 Not available withmatching edge option, and only available onworksurfaces.**Melamine worksurface finish, excludingAutoStrada, Currents and Morrison Tables.
Note: All core Laminate worksurfaces areavailable with matching and non matchingedges. ie; A worksurface in 118, can have 139edge finish.
Wood Grain LaminatesSurface / Edge124 Medium Chery**125 Natural Maple**126 Natural Cherry**127 Walnut**139 Light Ash**140 Warm Ash**141 Whitened Ash**142 Grey Ash**143 Classic Oak**144 Graphite Pear**145 Zebra147 Silverwood**148 Smokewood**149 Barnwood**
Additional Edge Options forLaminate worksurfaces (only):WPLY Ply Edge - Wood (V1
Pricing)SPLY Ply Edge - Synthetic (L Pricing)
Core & Wood Grain LaminatesSurface / Edge911 Jet Black914 Folkstone Grey917 Soft Grey918 Bright White919 Pumice924 Medium Cherry925 Natural Maple926 Natural Cherry927 Walnut928 FogNote: The Rules of Wood Grain Laminates,applies to the Impact Resistant Laminates.*25% Upcharge applies to the laminate pricingfor the Impact Resistant Laminates.
Note: For Tone Profiles, AutoStrada and Antenna / Telescope and Morrison you can chose from V1, V2 and V3.For Dividends Horizon you can chose from V1 only.Please refer to individual price lists for detailed information on finish options.
Tone Height-Adjustable Tables
5
Tone Height-Adjustable TablesBase Types and Height Ranges
Tone is available in six base types with a range of height-adjustability options to meet a variety of workplace needs. Tone Height-Adjustable Tables are availablein four height-adjustable options that are controlled by the user - Electric, Extended Electric, Handcrank and Extended Handcrank. Both types of Electric baseshave button controls on the front edge of the base underneath the top to adjust the top up and down. Handcrank table bases have a handle on the front of thetable underneath the top that turns to adjust the height of the table. Pin-Set bases adjust with the placement of a pin in each leg to create the appropriate heightworksurface for each user - this adjustment is not adjustable by the user. A fixed-height option is also available.
The energy use per electric Tone table during operation ranges from 180-320 Watts, which translates to 1.5-3.2 Amps. Energy consumption during standby is.45 Watts, which translates to .00375 Amps. Power requirements and usage per table: 120-240V, 50-60 HZ; 3.2 amp 120V running draw.
Base Types Fixed Pin-Set HandcrankExtendedHandcrank Electric
ExtendedElectric
Height Range * 26.8� 25.8�-40.8� 25.6�-42.1� 21.6�-47.8� 25.6�-42.1� 21.6�-47.8�
Adjustments N/A 1� increments 6 turns per inch 6 turns per inch 1-2� per second 1-2� per secondLoad Capacity(Rectangular)
265 lbs. 265 lbs. 135 lbs. 135 lbs. 265 lbs. 265 lbs.
Load Capacity(Corner and 120�)
395 lbs. 395 lbs. N/A N/A 395 lbs. 395 lbs.
* Height ranges shown do not include top thickness* Heights above are for Tone with glides. Casters raise the table 11/8�
Published heights are measured to the underside of the worksurface. When planning with storage or other object under the desk, account for 21/2� of base structure.Do not specify items that interfere with the travel of the table.
A 15� worksurface overhand is permitted on one or both sides.
Tone Height-Adjustable Tables
6
Standard ElectricFixed Width Base
description type w* w d pattern no. list price
24� Deep C-Leg Bases For use with 42�W, 24�D C-Leg Top 42� 35� 22� TBCEF3522( )( )( ) $2,815.For use with 48�W, 24�D C-Leg Top 48� 41� 22� TBCEF4122( )( )( ) 2,815.For use with 54�W, 24�D C-Leg Top 54� 47� 22� TBCEF4722( )( )( ) 2,815.For use with 60�W, 24�D C-Leg Top 60� 53� 22� TBCEF5322( )( )( ) 2,815.For use with 66�W, 24�D C-Leg Top 66� 59� 22� TBCEF5922( )( )( ) 2,840.For use with 72�W, 24�D C-Leg Top 72� 65� 22� TBCEF6522( )( )( ) 2,840.For use with 78�W, 24�D C-Leg Top 78� 71� 22� TBCEF7122( )( )( ) 2,840.
30� Deep C-Leg Bases For use with 42�W, 30�D C-Leg Top 42� 35� 28� TBCEF3528( )( )( ) 2,864.For use with 48�W, 30�D C-Leg Top 48� 41� 28� TBCEF4128( )( )( ) 2,864.For use with 54�W, 30�D C-Leg Top 54� 47� 28� TBCEF4728( )( )( ) 2,864.For use with 60�W, 30�D C-Leg Top 60� 53� 28� TBCEF5328( )( )( ) 2,864.For use with 66�W, 30�D C-Leg Top 66� 59� 28� TBCEF5928( )( )( ) 2,889.For use with 72�W, 30�D C-Leg Top 72� 65� 28� TBCEF6528( )( )( ) 2,889.For use with 78�W, 30�D C-Leg Top 78� 71� 28� TBCEF7128( )( )( ) 2,889.
30� Deep T-Leg Bases For use with 48�W, 30� or 36�D T-Leg Top 48� 41� 28� TBTEF4128( )( )( ) 2,864.For use with 54�W, 30� or 36�D T-Leg Top 54� 47� 28� TBTEF4728( )( )( ) 2,864.For use with 60�W, 30� or 36�D T-Leg Top 60� 53� 28� TBTEF5328( )( )( ) 2,864.For use with 66�W, 30� or 36�D T-Leg Top 66� 59� 28� TBTEF5928( )( )( ) 2,889.For use with 72�W, 30� or 36�D T-Leg Top 72� 65� 28� TBTEF6528( )( )( ) 2,889.For use with 78�W, 30� or 36�D T-Leg Top 78� 71� 28� TBTEF7128( )( )( ) 2,889.
* Nominal Width
Order Code
C-Leg and T-Leg Bases
Example: TBCEF5328GD613
TB Tone BaseC C-LegE ElectricF Fixed Width53 Width28 DepthG GlidesD Digital Control Switch613 Silver Finish
Specification Information
1. Glides or Casters:Add a ‘‘G’’ Suffix to the patternnumber to specify Glides. Or adda ‘‘C’’ to specify Casters. Add$69 list for casters.
2. Control Switch:‘‘S’’ specifies the StandardUp/Down Switch..‘‘TR’’ specifies the red ToggleSwitch.‘‘TG’’ specifies the grey ToggleSwitch. An upcharge of $100applies to the ‘‘Toggle Switchoption�.‘‘D’’ specifies the Digital ControlSwitch with programmablesetting. Add $318 list for theDigital Control Switch. Whenplanning with furniture thatinterferes with the travel of thetable, the Digital Control Switchmust be ordered
3. Base Finish:All core paint finishes areavailable
Application Notes
Bases are designed for use withcorresponding worksurfaces tocreate freestanding tables.Worksurfaces must be specifiedseparately.
A stiffener is recommended onworksurfaces that are 72� or wider.
Base comes with worksurfacemounting hardware.
Privacy Screens can only bespecified with glides.
22�D and 23�D C-Leg bases supportrectangular tops up to 24�D. 28�Dand 29�D C-Leg bases supportrectangular tops up to 30�D. 28�Dand 30�D T-Leg bases supportrectangular tops up to 36�Dcentered over feet. Corner basessupport Corner tops and rectangularworksurfaces with perpendicularreturns up to 30�D. 120° basessupport 120° tops up to 30�D.
Tone Height Adjustable Tables
7
Standard ElectricFixed Width Base
description type w* w d pattern no. list price
Corner Base For use with 48�W Corner Top 48� 44� 16� TBKEF444416( )( )( ) $3,990.
120° Base For use with 48�W, 24� or 27�D 120° Tops 48� 45� 16� TBVEF454516( )( )( ) 3,990.For use with 54�W, 24� or 27�D 120° Tops 54� 51� 16� TBVEF515116( )( )( ) 4,015.For use with 60�W, 24� or 27�D 120° Tops 60� 57� 16� TBVEF575716( )( )( ) 4,039.
* Nominal Width
Order Code
Example: TBCEF5328GD613
TB Tone BaseC C-LegE ElectricF Fixed Width53 Width28 DepthG GlidesD Digital Control Switch613 Silver Finish
Specification Information
1. Glides or Casters:Add a ‘‘G’’ Suffix to the patternnumber to specify Glides. Or adda ‘‘C’’ to specify Casters. Add$69 list for casters.
2. Control Switch:‘‘S’’ specifies the StandardUp/Down Switch.‘‘TR’’ specifies the red ToggleSwitch.‘‘TG’’ specifies the grey ToggleSwitch. An upcharge of $100applies to the ‘‘Toggle Switchoption�.‘‘D’’ specifies the Digital ControlSwitch with programmablesetting. Add $318 list for theDigital Control Switch. Whenplanning with furniture thatinterferes with the travel of thetable, the Digital Control Switchmust be ordered.
3. Base Finish:All core paint finishes areavailable
Application Notes
Bases are designed for use withcorresponding worksurfaces tocreate freestanding tables.Worksurfaces must be specifiedseparately.
A stiffener is recommended onworksurfaces that are 72� or wider.
Base comes with worksurfacemounting hardware.
Privacy Screens can only bespecified with glides.
22�D and 23�D C-Leg bases supportrectangular tops up to 24�D. 28�Dand 29�D C-Leg bases supportrectangular tops up to 30�D. 28�Dand 30�D T-Leg bases supportrectangular tops up to 36�Dcentered over feet. Corner basessupport Corner tops and rectangularworksurfaces with perpendicularreturns up to 30�D. 120° basessupport 120° tops up to 30�D.
Tone Height Adjustable Tables
8
Standard ElectricFixed Width Base, Extended Heel
description type w* w d pattern no. list price
24� Deep C-Leg Bases For use with 42�W, 24�D C-Leg Top 42� 35� 23� TBCEF3523( )( )( ) $2,815.For use with 48�W, 24�D C-Leg Top 48� 41� 23� TBCEF4123( )( )( ) 2,815.For use with 54�W, 24�D C-Leg Top 54� 47� 23� TBCEF4723( )( )( ) 2,815.For use with 60�W, 24�D C-Leg Top 60� 53� 23� TBCEF5323( )( )( ) 2,815.For use with 66�W, 24�D C-Leg Top 66� 59� 23� TBCEF5923( )( )( ) 2,840.For use with 72�W, 24�D C-Leg Top 72� 65� 23� TBCEF6523( )( )( ) 2,840.For use with 78�W, 24�D C-Leg Top 78� 71� 23� TBCEF7123( )( )( ) 2,840.
30� Deep C-Leg Bases For use with 42�W, 30�D C-Leg Top 42� 35� 29� TBCEF3529( )( )( ) 2,864.For use with 48�W, 30�D C-Leg Top 48� 41� 29� TBCEF4129( )( )( ) 2,864.For use with 54�W, 30�D C-Leg Top 54� 47� 29� TBCEF4729( )( )( ) 2,864.For use with 60�W, 30�D C-Leg Top 60� 53� 29� TBCEF5329( )( )( ) 2,864.For use with 66�W, 30�D C-Leg Top 66� 59� 29� TBCEF5929( )( )( ) 2,889.For use with 72�W, 30�D C-Leg Top 72� 65� 29� TBCEF6529( )( )( ) 2,889.For use with 78�W, 30�D C-Leg Top 78� 71� 29� TBCEF7129( )( )( ) 2,889.
30� Deep T-Leg Bases For use with 48�W, 30� or 36�D T-Leg Top 48� 41� 30� TBTEF4130( )( )( ) 2,864.For use with 54�W, 30� or 36�D T-Leg Top 54� 47� 30� TBTEF4730( )( )( ) 2,864.For use with 60�W, 30� or 36�D T-Leg Top 60� 53� 30� TBTEF5330( )( )( ) 2,864.For use with 66�W, 30� or 36�D T-Leg Top 66� 59� 30� TBTEF5930( )( )( ) 2,889.For use with 72�W, 30� or 36�D T-Leg Top 72� 65� 30� TBTEF6530( )( )( ) 2,889.For use with 78�W, 30� or 36�D T-Leg Top 78� 71� 30� TBTEF7130( )( )( ) 2,889.
* Nominal Width
Order Code
C-Leg and T-Leg Bases
Example: TBCEF5328GD613
TB Tone BaseC C-LegE ElectricF Fixed Width53 Width28 DepthG GlidesD Digital Control Switch613 Silver Finish
Specification Information
1. Glides or Casters:Add a ‘‘G’’ Suffix to the patternnumber to specify Glides. Or adda ‘‘C’’ to specify Casters. Add$69 list for casters.
2. Control Switch:‘‘S’’ specifies the StandardUp/Down Switch.‘‘TR’’ specifies the red ToggleSwitch.‘‘TG’’ specifies the grey ToggleSwitch. An upcharge of $100applies to the ‘‘Toggle Switchoption�.‘‘D’’ specifies the Digital ControlSwitch with programmablesetting. Add $318 list for theDigital Control Switch. Whenplanning with furniture thatinterferes with the travel of thetable, the Digital Control Switchmust be ordered.
3. Base Finish:All core paint finishes areavailable
Application Notes
Bases are designed for use withcorresponding worksurfaces tocreate freestanding tables.Worksurfaces must be specifiedseparately.
A stiffener is recommended onworksurfaces that are 72� or wider.
Base comes with worksurfacemounting hardware.
Privacy Screens can only bespecified with glides.
22�D and 23�D C-Leg bases supportrectangular tops up to 24�D. 28�Dand 29�D C-Leg bases supportrectangular tops up to 30�D. 28�Dand 30�D T-Leg bases supportrectangular tops up to 36�Dcentered over feet. Corner basessupport Corner tops and rectangularworksurfaces with perpendicularreturns up to 30�D. 120° basessupport 120° tops up to 30�D.
Tone with an Extended Heel isavailable on rectangular StandardElectric and Extended Electricbases only. Tone Extended Heelbases are recommended whenprivacy screen are specified.
Tone Height Adjustable Tables
9
Standard ElectricAdjustable Width Base
description type w d pattern no. list
24� Deep C-Leg Bases Small - For use with 30� - 54� wide tops 293/4� - 451/4� 22� TBCEAS22( )( )( ) $2,939.Medium - For use with 42� - 78� wide tops 413/4� - 691/4� 22� TBCEAM22( )( )( ) 2,962.Large - For use with 66� - 96� wide tops 611/4� - 891/4� 22� TBCEAL22( )( )( ) 2,987.
30� Deep C-Leg Bases Small - For use with 30� - 54� wide tops 293/4� - 451/4� 28� TBCEAS28( )( )( ) 3,010.Medium - For use with 42� - 78� wide tops 413/4� - 691/4� 28� TBCEAM28( )( )( ) 3,035.Large - For use with 66� - 96� wide tops 611/4� - 891/4� 28� TBCEAL28( )( )( ) 3,060.
30� Deep T-Leg Bases Small - For use with 30� - 54� wide tops 293/4� - 451/4� 28� TBTEAS28( )( )( ) 3,010.Medium - For use with 42� - 78� wide tops 413/4� - 691/4� 28� TBTEAM28( )( )( ) 3,035.Large - For use with 66� - 96� wide tops 611/4� - 891/4� 28� TBTEAL28( )( )( ) 3,060.
Order Code
C-Leg and T-Leg Bases
Example: TBCEAS28GD613
TB Tone BaseC C-LegE ElectricA Adjustable WidthS Small28 DepthG GlidesD Digital Control Switch613 Silver Finish
Specification Information
1. Glides or Casters:Add a ‘‘G’’ Suffix to the patternnumber to specify Glides. Or adda ‘‘C’’ to specify Casters. Add$69 list for casters.
2. Control Switch:‘‘S’’ specifies the StandardUp/Down Switch.‘‘TR’’ specifies the red ToggleSwitch.‘‘TG’’ specifies the grey ToggleSwitch. An upcharge of $100applies to the ‘‘Toggle Switchoption�.‘‘D’’ specifies the Digital ControlSwitch with programmablesetting. Add $318 list for theDigital Control Switch. Whenplanning with furniture thatinterferes with the travel of thetable, the Digital Control Switchmust be ordered.
3. Base Finish:All core paint finishes areavailable
Application Notes
Bases are designed for use withcorresponding worksurfaces tocreate freestanding tables.Worksurfaces must be specifiedseparately.
A stiffener is recommended onworksurfaces that are 72� or wider.
Base comes with worksurfacemounting hardware.
Privacy Screens can only bespecified with glides.
22�D and 23�D C-Leg bases supportrectangular tops up to 24�D. 28�Dand 29�D C-Leg bases supportrectangular tops up to 30�D. 28�Dand 30�D T-Leg bases supportrectangular tops up to 36�Dcentered over feet. Corner basessupport Corner tops and rectangularworksurfaces with perpendicularreturns up to 30�D. 120° basessupport 120° tops up to 30�D.
Tone Height Adjustable Tables
10
Standard ElectricAdjustable Width Base
description type w d pattern no. list
Corner Base Medium - For use with Corner tops orrectangular worksurfaces with perpendicularreturns. Max 84’’ on each side.
471/4� - 741/2� 16� TBKEAM16( )( )( ) $4,063.
Small - For use with Corner tops or rectangularworksurfaces with perpendicular returns. Max60’’ on each side.
351/4� - 501/2� 16� TBKEAS16( )( )( ) 4,039.
Small/Medium - For use with Extended Cornertops or rectangular worksurfaces withperpendicular returns. Max 60’’ wide on one sideand 84’’ wide on the other
351/4� - 501/2�471/4� - 741/2�
16� TBKEASM16( )( )( ) 4,063.
120° Base For use with 48�, 54� and 60�W 120° Tops 431/4� - 581/2� 16� TBVEAS16( )( )( ) 4,063.
Order Code
Example: TBCEAS28GD613
TB Tone BaseC C-LegE ElectricA Adjustable WidthS Small28 DepthG GlidesD Digital Control Switch613 Silver Finish
Specification Information
1. Glides or Casters:Add a ‘‘G’’ Suffix to the patternnumber to specify Glides. Or adda ‘‘C’’ to specify Casters. Add$69 list for casters.
2. Control Switch:‘‘S’’ specifies the StandardUp/Down Switch.‘‘TR’’ specifies the red ToggleSwitch.‘‘TG’’ specifies the grey ToggleSwitch. An upcharge of $100applies to the ‘‘Toggle Switchoption�.‘‘D’’ specifies the Digital ControlSwitch with programmablesetting. Add $318 list for theDigital Control Switch. Whenplanning with furniture thatinterferes with the travel of thetable, the Digital Control Switchmust be ordered.
3. Base Finish:All core paint finishes areavailable
Application Notes
Bases are designed for use withcorresponding worksurfaces tocreate freestanding tables.Worksurfaces must be specifiedseparately.
A stiffener is recommended onworksurfaces that are 72� or wider.
Base comes with worksurfacemounting hardware.
Privacy Screens can only bespecified with glides.
22�D and 23�D C-Leg bases supportrectangular tops up to 24�D. 28�Dand 29�D C-Leg bases supportrectangular tops up to 30�D. 28�Dand 30�D T-Leg bases supportrectangular tops up to 36�Dcentered over feet. Corner basessupport Corner tops and rectangularworksurfaces with perpendicularreturns up to 30�D. 120° basessupport 120° tops up to 30�D.
Tone Height Adjustable Tables
11
Standard ElectricAdjustable Width Base, Extended Heel
description type w d pattern no. list
24� Deep C-Leg Bases Small - For use with 30� - 54� wide tops 293/4� - 451/4� 23� TBCEAS23( )( )( ) $2,939.Medium - For use with 42� - 78� wide tops 413/4� - 691/4� 23� TBCEAM23( )( )( ) 2,962.Large - For use with 66� - 96� wide tops 611/4� - 891/4� 23� TBCEAL23( )( )( ) 2,987.
30� Deep C-Leg Bases Small - For use with 30� - 54� wide tops 293/4� - 451/4� 29� TBCEAS29( )( )( ) 3,010.Medium - For use with 42� - 78� wide tops 413/4� - 691/4� 29� TBCEAM29( )( )( ) 3,035.Large - For use with 66� - 96� wide tops 611/4� - 891/4� 29� TBCEAL29( )( )( ) 3,060.
30� Deep T-Leg Bases Small - For use with 30� - 54� wide tops 293/4� - 451/4� 30� TBTEAS30( )( )( ) 3,010.Medium - For use with 42� - 78� wide tops 413/4� - 691/4� 30� TBTEAM30( )( )( ) 3,035.Large - For use with 66� - 96� wide tops 611/4� - 891/4� 30� TBTEAL30( )( )( ) 3,060.
Order Code
C-Leg and T-Leg Bases
Example: TBCEAS28GD613
TB Tone BaseC C-LegE ElectricA Adjustable WidthS Small28 DepthG GlidesD Digital Control Switch613 Silver Finish
Specification Information
1. Glides or Casters:Add a ‘‘G’’ Suffix to the patternnumber to specify Glides. Or adda ‘‘C’’ to specify Casters. Add$69 list for casters.
2. Control Switch:‘‘S’’ specifies the StandardUp/Down Switch.‘‘TR’’ specifies the red ToggleSwitch.‘‘TG’’ specifies the grey ToggleSwitch. An upcharge of $100applies to the ‘‘Toggle Switchoption�.‘‘D’’ specifies the Digital ControlSwitch with programmablesetting. Add $318 list for theDigital Control Switch. Whenplanning with furniture thatinterferes with the travel of thetable, the Digital Control Switchmust be ordered.
3. Base Finish:All core paint finishes areavailable
Application Notes
Bases are designed for use withcorresponding worksurfaces tocreate freestanding tables.Worksurfaces must be specifiedseparately.
A stiffener is recommended onworksurfaces that are 72� or wider.
Base comes with worksurfacemounting hardware.
Privacy Screens can only bespecified with glides.
22�D and 23�D C-Leg bases supportrectangular tops up to 24�D. 28�Dand 29�D C-Leg bases supportrectangular tops up to 30�D. 28�Dand 30�D T-Leg bases supportrectangular tops up to 36�Dcentered over feet. Corner basessupport Corner tops up to 30�D.120° bases support 120° tops up to30�D.
Tone with an Extended Heel isavailable on rectangular StandardElectric and Extended Electricbases only. Tone Extended Heelbases are recommended whenprivacy screen are specified.
Tone Height Adjustable Tables
12
Extended ElectricFixed Width Base
description type w* w d pattern no. list
24� Deep C-Leg Bases For use with 42�W, 24�D C-Leg Top 42� 35� 22� TBCEXF3522( )( )( ) $3,453.For use with 48�W, 24�D C-Leg Top 48� 41� 22� TBCEXF4122( )( )( ) 3,453.For use with 54�W, 24�D C-Leg Top 54� 47� 22� TBCEXF4722( )( )( ) 3,453.For use with 60�W, 24�D C-Leg Top 60� 53� 22� TBCEXF5322( )( )( ) 3,453.For use with 66�W, 24�D C-Leg Top 66� 59� 22� TBCEXF5922( )( )( ) 3,476.For use with 72�W, 24�D C-Leg Top 72� 65� 22� TBCEXF6522( )( )( ) 3,476.For use with 78�W, 24�D C-Leg Top 78� 71� 22� TBCEXF7122( )( )( ) 3,476.
30� Deep C-Leg Bases For use with 42�W, 30�D C-Leg Top 42� 35� 28� TBCEXF3528( )( )( ) 3,501.For use with 48�W, 30�D C-Leg Top 48� 41� 28� TBCEXF4128( )( )( ) 3,501.For use with 54�W, 30�D C-Leg Top 54� 47� 28� TBCEXF4728( )( )( ) 3,501.For use with 60�W, 30�D C-Leg Top 60� 53� 28� TBCEXF5328( )( )( ) 3,501.For use with 66�W, 30�D C-Leg Top 66� 59� 28� TBCEXF5928( )( )( ) 3,524.For use with 72�W, 30�D C-Leg Top 72� 65� 28� TBCEXF6528( )( )( ) 3,524.For use with 78�W, 30�D C-Leg Top 78� 71� 28� TBCEXF7128( )( )( ) 3,524.
30� Deep T-Leg Bases For use with 48�W, 30� or 36�D T-Leg Top 48� 41� 28� TBTEXF4128( )( )( ) 3,501.For use with 54�W, 30� or 36�D T-Leg Top 54� 47� 28� TBTEXF4728( )( )( ) 3,501.For use with 60�W, 30� or 36�D T-Leg Top 60� 53� 28� TBTEXF5328( )( )( ) 3,501.For use with 66�W, 30� or 36�D T-Leg Top 66� 59� 28� TBTEXF5928( )( )( ) 3,524.For use with 72�W, 30� or 36�D T-Leg Top 72� 65� 28� TBTEXF6528( )( )( ) 3,524.For use with 78�W, 30� or 36�D T-Leg Top 78� 71� 28� TBTEXF7128( )( )( ) 3,524.
Corner Base For use with 48�W Corner Top 48� 44� 16� TBKEXF444416( )( )( ) 4,896.
* Nominal Width
Order Code
C-Leg and T-Leg Bases
Example: TBCEXF4722CS613
TB Tone BaseC C-LegEX Extended ElectricF Fixed Width47 Width22 DepthC CastersS Standard Display613 Silver Finish
Specification Information
1. Glides or Casters:Add a ‘‘G’’ Suffix to the patternnumber to specify Glides. Or adda ‘‘C’’ to specify Casters. Add$69 list for casters.
2. Control Switch:‘‘S’’ specifies the StandardUp/Down Switch.‘‘TR’’ specifies the red ToggleSwitch.‘‘TG’’ specifies the grey ToggleSwitch. An upcharge of $100applies to the ‘‘Toggle Switchoption�.‘‘D’’ specifies the Digital ControlSwitch with programmablesetting. Add $318 list for theDigital Control Switch. Whenplanning with furniture thatinterferes with the travel of thetable, the Digital Control Switchmust be ordered.
3. Base Finish:All core paint finishes areavailable
Application Notes
Bases are designed for use withcorresponding worksurfaces tocreate freestanding tables.Worksurfaces must be specifiedseparately.
A stiffener is recommended onworksurfaces that are 72� or wider.
Base comes with worksurfacemounting hardware.
Privacy Screens can only bespecified with glides.
22�D and 23�D C-Leg bases supportrectangular tops up to 24�D. 28�Dand 29�D C-Leg bases supportrectangular tops up to 30�D. 28�Dand 30�D T-Leg bases supportrectangular tops up to 36�Dcentered over feet. Corner basessupport Corner tops and rectangularworksurfaces with perpendicularreturns up to 30�D. 120° basessupport 120° tops up to 30�D.
Tone Height Adjustable Tables
13
Extended ElectricFixed Width Base, Extended Heel
description type w* w d pattern no. list
24� Deep C-Leg Bases For use with 42�W, 24�D C-Leg Top 42� 35� 23� TBCEXF3523( )( )( ) $3,453.For use with 48�W, 24�D C-Leg Top 48� 41� 23� TBCEXF4123( )( )( ) 3,453.For use with 54�W, 24�D C-Leg Top 54� 47� 23� TBCEXF4723( )( )( ) 3,453.For use with 60�W, 24�D C-Leg Top 60� 53� 23� TBCEXF5323( )( )( ) 3,453.For use with 66�W, 24�D C-Leg Top 66� 59� 23� TBCEXF5923( )( )( ) 3,476.For use with 72�W, 24�D C-Leg Top 72� 65� 23� TBCEXF6523( )( )( ) 3,476.For use with 78�W, 24�D C-Leg Top 78� 71� 23� TBCEXF7123( )( )( ) 3,476.
30� Deep C-Leg Bases For use with 42�W, 30�D C-Leg Top 42� 35� 29� TBCEXF3529( )( )( ) 3,501.For use with 48�W, 30�D C-Leg Top 48� 41� 29� TBCEXF4129( )( )( ) 3,501.For use with 54�W, 30�D C-Leg Top 54� 47� 29� TBCEXF4729( )( )( ) 3,501.For use with 60�W, 30�D C-Leg Top 60� 53� 29� TBCEXF5329( )( )( ) 3,501.For use with 66�W, 30�D C-Leg Top 66� 59� 29� TBCEXF5929( )( )( ) 3,524.For use with 72�W, 30�D C-Leg Top 72� 65� 29� TBCEXF6529( )( )( ) 3,524.For use with 78�W, 30�D C-Leg Top 78� 71� 29� TBCEXF7129( )( )( ) 3,524.
30� Deep T-Leg Bases For use with 48�W, 30� or 36�D T-Leg Top 48� 41� 30� TBTEXF4130( )( )( ) 3,501.For use with 54�W, 30� or 36�D T-Leg Top 54� 47� 30� TBTEXF4730( )( )( ) 3,501.For use with 60�W, 30� or 36�D T-Leg Top 60� 53� 30� TBTEXF5330( )( )( ) 3,501.For use with 66�W, 30� or 36�D T-Leg Top 66� 59� 30� TBTEXF5930( )( )( ) 3,524.For use with 72�W, 30� or 36�D T-Leg Top 72� 65� 30� TBTEXF6530( )( )( ) 3,524.For use with 78�W, 30� or 36�D T-Leg Top 78� 71� 30� TBTEXF7130( )( )( ) 3,524.
* Nominal Width
Order Code
C-Leg and T-Leg Bases
Example: TBCEXF4722CS613
TB Tone BaseC C-LegEX Extended ElectricF Fixed Width47 Width22 DepthC CastersS Standard Display613 Silver Finish
Specification Information
1. Glides or Casters:Add a ‘‘G’’ Suffix to the patternnumber to specify Glides. Or adda ‘‘C’’ to specify Casters. Add$69 list for casters.
2. Control Switch:‘‘S’’ specifies the StandardUp/Down Switch.‘‘TR’’ specifies the red ToggleSwitch.‘‘TG’’ specifies the grey ToggleSwitch. An upcharge of $100applies to the ‘‘Toggle Switchoption�.‘‘D’’ specifies the Digital ControlSwitch with programmablesetting. Add $318 list for theDigital Control Switch. Whenplanning with furniture thatinterferes with the travel of thetable, the Digital Control Switchmust be ordered.
3. Base Finish:All core paint finishes areavailable
Application Notes
Bases are designed for use withcorresponding worksurfaces tocreate freestanding tables.Worksurfaces must be specifiedseparately.
A stiffener is recommended onworksurfaces that are 72� or wider.
Base comes with worksurfacemounting hardware.
Privacy Screens can only bespecified with glides.
22�D and 23�D C-Leg bases supportrectangular tops up to 24�D. 28�Dand 29�D C-Leg bases supportrectangular tops up to 30�D. 28�Dand 30�D T-Leg bases supportrectangular tops up to 36�Dcentered over feet. Corner basessupport Corner tops and rectangularworksurfaces with perpendicularreturns up to 30�D. 120° basessupport 120° tops up to 30�D.
Tone with an Extended Heel isavailable on rectangular StandardElectric and Extended Electricbases only. Tone Extended Heelbases are recommended whenprivacy screen are specified.
Tone Height Adjustable Tables
14
Extended ElectricAdjustable Width Base
description type w d pattern no. list
24� Deep C-Leg Bases Small - For use with 30� - 54� wide tops 293/4� - 451/4� 22� TBCEXAS22( )( )( ) $3,574.Medium - For use with 42� - 78� wide tops 413/4� - 691/4� 22� TBCEXAM22( )( )( ) 3,599.Large - For use with 66� - 96� wide tops 611/4� - 891/4� 22� TBCEXAL22( )( )( ) 3,623.
30� Deep C-Leg Bases Small - For use with 30� - 54� wide tops 293/4� - 451/4� 28� TBCEXAS28( )( )( ) 3,647.Medium - For use with 42� - 78� wide tops 413/4� - 691/4� 28� TBCEXAM28( )( )( ) 3,672.Large - For use with 66� - 96� wide tops 611/4� 891/4� 28� TBCEXAL28( )( )( ) 3,698.
30� Deep T-Leg Bases Small - For use with 30� - 54� wide tops 293/4� - 451/4� 28� TBTEXAS28( )( )( ) 3,647.Medium - For use with 42� - 78� wide tops 413/4� - 691/4� 28� TBTEXAM28( )( )( ) 3,672.Large - For use with 66� - 96� wide tops 611/4� - 891/4� 28� TBTEXAL28( )( )( ) 3,698.
Corner Base Small - For use with Corner tops or rectangularworksurfaces with perpendicular returns. Max60’’ on each side.
351/4� - 501/2� 16� TBKEXAS16( )( )( ) 4,993.
Medium - For use with Corner tops orrectangular worksurfaces with perpendicularreturns. Max 84’’ on each side.
471/4� - 741/2� 16� TBKEXAM16( )( )( ) 5,018.
Small/Medium - For use with Extended Cornertops or rectangular worksurfaces withperpendicular returns. Max 60’’ wide on one sideand 84’’ wide on the other.
351/4� - 501/2�471/4� - 741/2�
16� TBKEXASM16( )( )( ) 5,018.
Order Code
C-Leg and T-Leg Bases
Example: TBTEXAS28GD613
TB Tone BaseT T-LegEX Extended ElectricA Adjustable WidthS Small28 DepthG GlidesD Digital Control Switch613 Silver Finish
Specification Information
1. Glides or Casters:Add a ‘‘G’’ Suffix to the patternnumber to specify Glides. Or adda ‘‘C’’ to specify Casters. Add$69 list for casters.
2. Control Switch:‘‘S’’ specifies the StandardUp/Down Switch.‘‘TR’’ specifies the red ToggleSwitch.‘‘TG’’ specifies the grey ToggleSwitch. An upcharge of $100applies to the ‘‘Toggle Switchoption�.‘‘D’’ specifies the Digital ControlSwitch with programmablesetting. Add $318 list for theDigital Control Switch. Whenplanning with furniture thatinterferes with the travel of thetable, the Digital Control Switchmust be ordered.
3. Base Finish:All core paint finishes areavailable
Application Notes
Bases are designed for use withcorresponding worksurfaces tocreate freestanding tables.Worksurfaces must be specifiedseparately.
A stiffener is recommended onworksurfaces that are 72� or wider.
Base comes with worksurfacemounting hardware.
Privacy Screens can only bespecified with glides.
22�D and 23�D C-Leg bases supportrectangular tops up to 24�D. 28�Dand 29�D C-Leg bases supportrectangular tops up to 30�D. 28�Dand 30�D T-Leg bases supportrectangular tops up to 36�Dcentered over feet. Corner basessupport Corner tops and rectangularworksurfaces with perpendicularreturns up to 30�D. 120° basessupport 120° tops up to 30�D.
Tone Height Adjustable Tables
15
Extended ElectricAdjustable Width Base, Extended Heel
description type w d pattern no. list
24� Deep C-Leg Bases Small - For use with 30� - 54� wide tops 293/4� - 451/4� 23� TBCEXAS23( )( )( ) $3,574.Medium - For use with 42� - 78� wide tops 413/4� - 691/4� 23� TBCEXAM23( )( )( ) 3,599.Large - For use with 66� - 96� wide tops 611/4� - 891/4� 23� TBCEXAL23( )( )( ) 3,623.
30� Deep C-Leg Bases Small - For use with 30� - 54� wide tops 293/4� - 451/4� 29� TBCEXAS29( )( )( ) 3,647.Medium - For use with 42� - 78� wide tops 413/4� - 691/4� 29� TBCEXAM29( )( )( ) 3,672.Large - For use with 66� - 96� wide tops 611/4� 891/4� 29� TBCEXAL29( )( )( ) 3,698.
30� Deep T-Leg Bases Small - For use with 30� - 54� wide tops 293/4� - 451/4� 30� TBTEXAS30( )( )( ) 3,647.Medium - For use with 42� - 78� wide tops 413/4� - 691/4� 30� TBTEXAM30( )( )( ) 3,672.Large - For use with 66� - 96� wide tops 611/4� - 891/4� 30� TBTEXAL30( )( )( ) 3,698.
Order Code
C-Leg and T-Leg Bases
Example: TBTEXAS28GD613
TB Tone BaseT T-LegEX Extended ElectricA Adjustable WidthS Small28 DepthG GlidesD Digital Control Switch613 Silver Finish
Specification Information
1. Glides or Casters:Add a ‘‘G’’ Suffix to the patternnumber to specify Glides. Or adda ‘‘C’’ to specify Casters. Add$69 list for casters.
2. Control Switch:‘‘S’’ specifies the StandardUp/Down Switch.‘‘TR’’ specifies the red ToggleSwitch.‘‘TG’’ specifies the grey ToggleSwitch. An upcharge of $100applies to the ‘‘Toggle Switchoption�.‘‘D’’ specifies the Digital ControlSwitch with programmablesetting. Add $318 list for theDigital Control Switch. Whenplanning with furniture thatinterferes with the travel of thetable, the Digital Control Switchmust be ordered.
3. Base Finish:All core paint finishes areavailable
Application Notes
Bases are designed for use withcorresponding worksurfaces tocreate freestanding tables.Worksurfaces must be specifiedseparately.
A stiffener is recommended onworksurfaces that are 72� or wider.
Base comes with worksurfacemounting hardware.
Privacy Screens can only bespecified with glides.
22�D and 23�D C-Leg bases supportrectangular tops up to 24�D. 28�Dand 29�D C-Leg bases supportrectangular tops up to 30�D. 28�Dand 30�D T-Leg bases supportrectangular tops up to 36�Dcentered over feet. Corner basessupport Corner tops and rectangularworksurfaces with perpendicularreturns up to 30�D. 120° basessupport 120° tops up to 30�D.
Tone with an Extended Heel isavailable on rectangular StandardElectric and Extended Electricbases only. Tone Extended Heelbases are recommended whenprivacy screen are specified.
Tone Height Adjustable Tables
16
HandcrankFixed Width
description type w* w d pattern no. list
24� Deep C-Leg Bases For use with 42�W, 24�D C-Leg Top 42� 35� 22� TBCHF3522( )( ) $2,233.For use with 48�W, 24�D C-Leg Top 48� 41� 22� TBCHF4122( )( ) 2,233.For use with 54�W, 24�D C-Leg Top 54� 47� 22� TBCHF4722( )( ) 2,233.For use with 60�W, 24�D C-Leg Top 60� 53� 22� TBCHF5322( )( ) 2,233.For use with 66�W, 24�D C-Leg Top 66� 59� 22� TBCHF5922( )( ) 2,255.For use with 72�W, 24�D C-Leg Top 72� 65� 22� TBCHF6522( )( ) 2,255.For use with 78�W, 24�D C-Leg Top 78� 71� 22� TBCHF7122( )( ) 2,255.
30� Deep C-Leg Bases For use with 42�W, 30�D C-Leg Top 42� 35� 28� TBCHF3528( )( ) 2,280.For use with 48�W, 30�D C-Leg Top 48� 41� 28� TBCHF4128( )( ) 2,280.For use with 54�W, 30�D C-Leg Top 54� 47� 28� TBCHF4728( )( ) 2,280.For use with 60�W, 30�D C-Leg Top 60� 53� 28� TBCHF5328( )( ) 2,280.For use with 66�W, 30�D C-Leg Top 66� 59� 28� TBCHF5928( )( ) 2,304.For use with 72�W, 30�D C-Leg Top 72� 65� 28� TBCHF6528( )( ) 2,304.For use with 78�W, 30�D C-Leg Top 78� 71� 28� TBCHF7128( )( ) 2,304.
30� Deep T-Leg Bases For use with 48�W, 30� or 36�D T-Leg Top 48� 41� 28� TBTHF4128( )( ) 2,280.For use with 54�W, 30� or 36�D T-Leg Top 54� 47� 28� TBTHF4728( )( ) 2,280.For use with 60�W, 30� or 36�D T-Leg Top 60� 53� 28� TBTHF5328( )( ) 2,280.For use with 66�W, 30� or 36�D T-Leg Top 66� 59� 28� TBTHF5928( )( ) 2,304.For use with 72�W, 30� or 36�D T-Leg Top 72� 65� 28� TBTHF6528( )( ) 2,304.
Order Code
C-Leg and T-Leg Bases
Example: TBCHF3522C613
TB Tone BaseC C-LegH HandcrankF Fixed Width35 Width22 DepthC Casters613 Silver Finish
Specification Information
1. Glides or Casters:Add a ‘‘G’’ Suffix to the patternnumber to specify Glides. Or adda ‘‘C’’ to specify Casters. Add$69 list for casters.
2. Base Finish:All core paint finishes areavailable
Application Notes
Bases are designed for use withcorresponding worksurfaces tocreate freestanding tables.Worksurfaces must be specifiedseparately.
A stiffener is recommended onworksurfaces that are 72� or wider.
Base comes with worksurfacemounting hardware.
Privacy Screens can only bespecified with glides.
22”D and 23”D C-Leg basessupport rectangular tops up to24”D. 28”D and 29”D C-Leg basessupport rectangular tops up to30”D. 28”D and 30”D T-Leg basessupport rectangular tops up to 36”Dcentered over feet.
Application Notes
The handcrank is located at thefront of the table and retracts to stowunder the worksurface. Handcranktables are non-handed.
Tone Height Adjustable Tables
17
HandcrankAdjustable Width
description type w d pattern no. list
24� Deep C-Leg Bases Small - For use with 30� - 54�W Tops 293/4� - 451/4� 22� TBCHAS22( )( ) $2,304.Medium - For use with 42� - 72�W Tops 413/4� - 691/4� 22� TBCHAM22( )( ) 2,329.Large - For use with 66� - 96�W Tops 611/4� - 891/4� 22� TBCHAL22( )( ) 2,352.
30� Deep C-Leg Bases Small - For use with 30� - 54�W Tops 293/4� - 451/4� 28� TBCHAS28( )( ) 2,376.Medium - For use with 42� - 72�W Tops 413/4� - 691/4� 28� TBCHAM28( )( ) 2,400.Large - For use with 66� - 96�W Tops 611/4� - 891/4� 28� TBCHAL28( )( ) 2,424.
30� Deep T-Leg Bases Small - For use with 30� - 54�W Tops 293/4� - 451/4� 28� TBTHAS28( )( ) 2,376.Medium - For use with 42� - 72�W Tops 413/4� - 691/4� 28� TBTHAM28( )( ) 2,400.Large - For use with 66� - 96�W Tops 611/4� - 891/4� 28� TBTHAL28( )( ) 2,424.
Order Code
C-Leg and T-Leg Bases
Example: TBCHF3522C613
TB Tone BaseC C-LegH HandcrankA Adjustable WidthM Medium22 DepthG Casters613 Silver Finish
Specification Information
1. Glides or Casters:Add a ‘‘G’’ Suffix to the patternnumber to specify Glides. Or adda ‘‘C’’ to specify Casters. Add$69 list for casters.
2. Base Finish:All core paint finishes areavailable
Application Notes
Bases are designed for use withcorresponding worksurfaces tocreate freestanding tables.Worksurfaces must be specifiedseparately.
A stiffener is recommended onworksurfaces that are 72� or wider.
Base comes with worksurfacemounting hardware.
22”D and 23”D C-Leg basessupport rectangular tops up to24”D. 28”D and 29”D C-Leg basessupport rectangular tops up to30”D. 28”D and 30”D T-Leg basessupport rectangular tops up to 36”Dcentered over feet.
Application Notes
The handcrank is located at thefront of the table and retracts to stowunder the worksurface. Handcranktables are non-handed.
Tone Height Adjustable Tables
18
Extended HandcrankFixed Width
description type w* w d pattern no. list
24� Deep C-Leg Bases For use with 42�W, 24�D C-Leg Top 42� 35� 22� TBCHXF3522( )( ) $2,807.For use with 48�W, 24�D C-Leg Top 48� 41� 22� TBCHXF4122( )( ) 2,807.For use with 54�W, 24�D C-Leg Top 54� 47� 22� TBCHXF4722( )( ) 2,807.For use with 60�W, 24�D C-Leg Top 60� 53� 22� TBCHXF5322( )( ) 2,807.For use with 66�W, 24�D C-Leg Top 66� 59� 22� TBCHXF5922( )( ) 2,832.For use with 72�W, 24�D C-Leg Top 72� 65� 22� TBCHXF6522( )( ) 2,832.For use with 78�W, 24�D C-Leg Top 78� 71� 22� TBCHXF7122( )( ) 2,832.
30� Deep C-Leg Bases For use with 42�W, 30�D C-Leg Top 42� 35� 28� TBCHXF3528( )( ) 2,857.For use with 48�W, 30�D C-Leg Top 48� 41� 28� TBCHXF4128( )( ) 2,857.For use with 54�W, 30�D C-Leg Top 54� 47� 28� TBCHXF4728( )( ) 2,857.For use with 60�W, 30�D C-Leg Top 60� 53� 28� TBCHXF5328( )( ) 2,857.For use with 66�W, 30�D C-Leg Top 66� 59� 28� TBCHXF5928( )( ) 2,879.For use with 72�W, 30�D C-Leg Top 72� 65� 28� TBCHXF6528( )( ) 2,879.For use with 78�W, 30�D C-Leg Top 78� 71� 28� TBCHXF7128( )( ) 2,879.
30� Deep T-Leg Bases For use with 48�W, 30� or 36�D T-Leg Top 48� 41� 28� TBTHXF4128( )( ) 2,857.For use with 54�W, 30� or 36�D T-Leg Top 54� 47� 28� TBTHXF4728( )( ) 2,857.For use with 60�W, 30� or 36�D T-Leg Top 60� 53� 28� TBTHXF5328( )( ) 2,857.For use with 66�W, 30� or 36�D T-Leg Top 66� 59� 28� TBTHXF5928( )( ) 2,879.For use with 72�W, 30� or 36�D T-Leg Top 72� 65� 28� TBTHXF6528( )( ) 2,879.
Order Code
C-Leg and T-Leg Bases
Example: TBCHF3522C613
TB Tone BaseC C-LegHX Extended HandcrankF Fixed Width35 Width22 DepthC Casters613 Silver Finish
Specification Information
1. Glides or Casters:Add a ‘‘G’’ Suffix to the patternnumber to specify Glides. Or adda ‘‘C’’ to specify Casters. Add$69 list for casters.
2. Base Finish:All core paint finishes areavailable
Application Notes
Bases are designed for use withcorresponding worksurfaces tocreate freestanding tables.Worksurfaces must be specifiedseparately.
A stiffener is recommended onworksurfaces that are 72� or wider.
Base comes with worksurfacemounting hardware.
Privacy Screens can only bespecified with glides.
22”D and 23”D C-Leg basessupport rectangular tops up to24”D. 28”D and 29”D C-Leg basessupport rectangular tops up to30”D. 28”D and 30”D T-Leg basessupport rectangular tops up to 36”Dcentered over feet.
Application Notes
The handcrank is located at thefront of the table and retracts to stowunder the worksurface. Handcranktables are non-handed.
Tone Height Adjustable Tables
19
Extended HandcrankAdjustable Width
description type w d pattern no. list
24� Deep C-Leg Bases Small - For use with 30� - 54�W Tops 293/4� - 451/4� 22� TBCHXAS22( )( ) $2,952.Medium - For use with 42� - 72�W Tops 413/4� - 691/4� 22� TBCHXAM22( )( ) 2,975.Large - For use with 66� - 72�W Tops 611/4� - 891/4� 22� TBCHXAL22( )( ) 3,000.
30� Deep C-Leg Bases Small - For use with 30� - 54�W Tops 293/4� - 451/4� 28� TBCHXAS28( )( ) 2,975.Medium - For use with 42� - 72�W Tops 413/4� - 691/4� 28� TBCHXAM28( )( ) 3,000.Large - For use with 66� - 72�W Tops 611/4� - 891/4� 28� TBCHXAL28( )( ) 3,024.
30� Deep T-Leg Bases Small - For use with 30� - 54�W Tops 293/4� - 451/4� 28� TBTHXAS28( )( ) 2,975.Medium - For use with 30� - 54�W Tops 413/4� - 691/4� 28� TBTHXAM28( )( ) 3,000.Large - For use with 30� - 54�W Tops 611/4� - 891/4� 28� TBTHXAL28( )( ) 3,024.
Order Code
C-Leg and T-Leg Bases
Example: TBCHF3522C613
TB Tone BaseC C-LegHX Extended HandcrankA Adjustable WidthM Medium22 DepthC Casters613 Silver Finish
Specification Information
1. Glides or Casters:Add a ‘‘G’’ Suffix to the patternnumber to specify Glides. Or adda ‘‘C’’ to specify Casters. Add$69 list for casters.
2. Base Finish:All core paint finishes areavailable
Application Notes
Bases are designed for use withcorresponding worksurfaces tocreate freestanding tables.Worksurfaces must be specifiedseparately.
A stiffener is recommended onworksurfaces that are 72� or wider.
Base comes with worksurfacemounting hardware.
Privacy screen can only be specifiedwith glides.
22”D and 23”D C-Leg basessupport rectangular tops up to24”D. 28”D and 29”D C-Leg basessupport rectangular tops up to30”D. 28”D and 30”D T-Leg basessupport rectangular tops up to 36”Dcentered over feet.
Application Notes
The handcrank is located at thefront of the table and retracts to stowunder the worksurface. Handcranktables are non-handed.
Tone Height Adjustable Tables
20
Pin-SetFixed Width Base
description type w* w d pattern no. list price
24� Deep C-Leg Bases For use with 42�W, 24�D C-Leg Top 42� 35� 22� TBCPF3522( )( ) $1,543.For use with 48�W, 24�D C-Leg Top 48� 41� 22� TBCPF4122( )( ) 1,543.For use with 54�W, 24�D C-Leg Top 54� 47� 22� TBCPF4722( )( ) 1,543.For use with 60�W, 24�D C-Leg Top 60� 53� 22� TBCPF5322( )( ) 1,543.For use with 66�W, 24�D C-Leg Top 66� 59� 22� TBCPF5922( )( ) 1,567.For use with 72�W, 24�D C-Leg Top 72� 65� 22� TBCPF6522( )( ) 1,567.For use with 78�W, 24�D C-Leg Top 78� 71� 22� TBCPF7122( )( ) 1,567.
30� Deep C-Leg Bases For use with 42�W, 30�D C-Leg Top 42� 35� 28� TBCPF3528( )( ) 1,591.For use with 48�W, 30�D C-Leg Top 48� 41� 28� TBCPF4128( )( ) 1,591.For use with 54�W, 30�D C-Leg Top 54� 47� 28� TBCPF4728( )( ) 1,591.For use with 60�W, 30�D C-Leg Top 60� 53� 28� TBCPF5328( )( ) 1,591.For use with 66�W, 30�D C-Leg Top 66� 59� 28� TBCPF5928( )( ) 1,616.For use with 72�W, 30�D C-Leg Top 72� 65� 28� TBCPF6528( )( ) 1,616.For use with 78�W, 30�D C-Leg Top 78� 71� 28� TBCPF7128( )( ) 1,616.
30� Deep T-Leg Bases For use with 48�W, 30� or 36�D T-Leg Top 48� 41� 28� TBTPF4128( )( ) 1,591.For use with 54�W, 30� or 36�D T-Leg Top 54� 47� 28� TBTPF4728( )( ) 1,591.For use with 60�W, 30� or 36�D T-Leg Top 60� 53� 28� TBTPF5328( )( ) 1,591.For use with 66�W, 30� or 36�D T-Leg Top 66� 59� 28� TBTPF5928( )( ) 1,616.For use with 72�W, 30� or 36�D T-Leg Top 72� 65� 28� TBTPF6528( )( ) 1,616.
Corner Base For use with 48�W Corner Top 48� 44� 16� TBKPF444416( )( ) 2,300.
120° Base For use with 48�W, 24� or 27�D 120° Tops 48� 45� 16� TBVPF454516( )( ) 2,300.For use with 54�W, 24� or 27�D 120° Tops 54� 51� 16� TBVPF515116( )( ) 2,326.For use with 60�W, 24� or 27�D 120° Tops 60� 57� 16� TBVPF575716( )( ) 2,350.
Order Code
C-Leg and T-Leg Bases
Example: TBCPF4722G,613
TB Tone BaseC C-LegP Pin-SetF Fixed Width47 Width22 DepthG Glides613 Silver Finish
Specification Information
1. Glides or Casters:Add a ‘‘G’’ Suffix to the patternnumber to specify Glides. Or adda ‘‘C’’ to specify Casters. Add$69 list for casters.
2. Base Finish:All core paint finishes areavailable
Application Notes
Bases are designed for use withcorresponding worksurfaces tocreate freestanding tables.Worksurfaces must be specifiedseparately.
A stiffener is recommended onworksurfaces that are 72� or wider.
Base comes with worksurfacemounting hardware.
Privacy screens can only bespecified with glides.
22”D and 23”D C-Leg basessupport rectangular tops up to24”D. 28”D and 29”D C-Leg basessupport rectangular tops up to30”D. 28”D and 30”D T-Leg basessupport rectangular tops up to 36”Dcentered over feet. Corner basessupport 48” Corner tops andrectangular worksurfaces withperpendicular returns up to 30”D.120° bases support 120° tops up to30”D.
Tone Height Adjustable Tables
21
Pin-SetAdjustable Width Base
description type w* d pattern no. list price
24� Deep C-Leg Bases Small - For use with 30� - 54� wide tops 293/4� - 451/4� 22� TBCPAS22( )( ) $1,616.Medium - For use with 42� - 78� wide tops 413/4� - 691/4� 22� TBCPAM22( )( ) 1,640.Large - For use with 66� - 96� wide tops 611/4� - 891/4� 22� TBCPAL22( )( ) 1,664.
30� Deep C-Leg Bases Small - For use with 30� - 54� wide tops 293/4� - 451/4� 28� TBCPAS28( )( ) 1,688.Medium - For use with 42� - 78� wide tops 413/4� - 691/4� 28� TBCPAM28( )( ) 1,715.Large - For use with 66� - 96� wide tops 611/4� - 891/4� 28� TBCPAL28( )( ) 1,738.
30� Deep T-Leg Bases Small - For use with 30� - 54� wide tops 293/4� - 451/4� 28� TBTPAS28( )( ) 1,688.Medium - For use with 42� - 78� wide tops 413/4� - 691/4� 28� TBTPAM28( )( ) 1,715.Large - For use with 66� - 96� wide tops 611/4� - 891/4� 28� TBTPAL28( )( ) 1,738.
Corner Bases Small - For use with corner tops or rectangularworksurfaces with perpendicular returns. Max60� on each side.
351/4� - 501/2� 16� TBKPAS16( )( ) 2,351.
Medium - For use with corner tops orrectangular worksurfaces with perpendicularreturns. Max 84� on each side.
471/4� - 741/2� 16� TBKPAM16( )( ) 2,375.
Small/Medium - For use with Extended cornertops or rectangular worksurfaces withperpendicular returns. Max 60� wide on one sideand 84� wide on the other.
351/4� - 501/2�471/4� - 741/2�
16� TBKPASM16( )( ) 2,375.
120° Base For use with 48�, 54� and 60�W 120° Tops 431/4� - 581/2� 16� TBVPAS16( )( ) 2,375.
Order Code
C-Leg and T-Leg Bases
Example: TBCPAM22C,613
TB Tone BaseC C-LegP Pin-SetA Adjustable WidthM Medium22 DepthC Casters613 Silver Finish
Specification Information
1. Glides or Casters:Add a ‘‘G’’ Suffix to the patternnumber to specify Glides. Or adda ‘‘C’’ to specify Casters. Add$69 list for casters.
2. Base Finish:All core paint finishes areavailable
Application Notes
Bases are designed for use withcorresponding worksurfaces tocreate freestanding tables.Worksurfaces must be specifiedseparately.
A stiffener is recommended onworksurfaces that are 72� or wider.
Base comes with worksurfacemounting hardware.
Privacy screens can only bespecified with glides.
22”D and 23”D C-Leg basessupport rectangular tops up to24”D. 28”D and 29”D C-Leg basessupport rectangular tops up to30”D. 28”D and 30”D T-Leg basessupport rectangular tops up to 36”Dcentered over feet. Corner basessupport Corner tops and rectangularworksurfaces with perpendicularreturns up to 30”D. 120° basessupport 120° tops up to 30”D.
Tone Height Adjustable Tables
22
Fixed HeightFixed Width Base
description type w* w d pattern no. list price
24� Deep C-Leg Bases For use with 42�W, 24�D C-Leg Top 42� 35� 22� TBCFF3522( )( ) $1,298.For use with 48�W, 24�D C-Leg Top 48� 41� 22� TBCFF4122( )( ) 1,298.For use with 54�W, 24�D C-Leg Top 54� 47� 22� TBCFF4722( )( ) 1,298.For use with 60�W, 24�D C-Leg Top 60� 53� 22� TBCFF5322( )( ) 1,298.For use with 66�W, 24�D C-Leg Top 66� 59� 22� TBCFF5922( )( ) 1,322.For use with 72�W, 24�D C-Leg Top 72� 65� 22� TBCFF6522( )( ) 1,322.For use with 78�W, 24�D C-Leg Top 78� 71� 22� TBCFF7122( )( ) 1,322.
30� Deep C-Leg Bases For use with 42�W, 30�D C-Leg Top 42� 35� 28� TBCFF3528( )( ) 1,346.For use with 48�W, 30�D C-Leg Top 48� 41� 28� TBCFF4128( )( ) 1,346.For use with 54�W, 30�D C-Leg Top 54� 47� 28� TBCFF4728( )( ) 1,346.For use with 60�W, 30�D C-Leg Top 60� 53� 28� TBCFF5328( )( ) 1,346.For use with 66�W, 30�D C-Leg Top 66� 59� 28� TBCFF5928( )( ) 1,370.For use with 72�W, 30�D C-Leg Top 72� 65� 28� TBCFF6528( )( ) 1,370.For use with 78�W, 30�D C-Leg Top 78� 71� 28� TBCFF7128( )( ) 1,370.
30� Deep T-Leg Bases For use with 48�W, 30� or 36�D T-Leg Top 48� 41� 28� TBTFF4128( )( ) 1,346.For use with 54�W, 30� or 36�D T-Leg Top 54� 47� 28� TBTFF4728( )( ) 1,346.For use with 60�W, 30� or 36�D T-Leg Top 60� 53� 28� TBTFF5328( )( ) 1,346.For use with 66�W, 30� or 36�D T-Leg Top 66� 59� 28� TBTFF5928( )( ) 1,370.For use with 72�W, 30� or 36�D T-Leg Top 72� 65� 28� TBTFF6528( )( ) 1,370.
Corner Base For use with 48�W Corner Top 48� 44� 16� TBKFF444416( )( ) 1,885.
120° Base For use with 48�W, 24� or 27�D 120° Tops 48� 45� 16� TBVFF454516( )( ) 1,885.For use with 54�W, 24� or 27�D 120° Tops 54� 51� 16� TBVFF515116( )( ) 1,909.For use with 60�W, 24� or 27�D 120° Tops 60� 57� 16� TBVFF575716( )( ) 1,934.
Order Code
C-Leg and T-Leg Bases
Example: TBCFF4722G,613
TB Tone BaseC C-LegF FixedF Fixed Width47 Width22 DepthG Glides613 Silver Finish
Specification Information
1. Glides or Casters:Add a ‘‘G’’ Suffix to the patternnumber to specify Glides. Or adda ‘‘C’’ to specify Casters. Add$69 list for casters.
2. Base Finish:All core paint finishes areavailable
Application Notes
Bases are designed for use withcorresponding worksurfaces tocreate freestanding tables.Worksurfaces must be specifiedseparately.
A stiffener is recommended onworksurfaces that are 72� or wider.
Base comes with worksurfacemounting hardware.
Privacy screens can only bespecified with glides.
22”D and 23”D C-Leg basessupport rectangular tops up to24”D. 28”D and 29”D C-Leg basessupport rectangular tops up to30”D. 28”D and 30”D T-Leg basessupport rectangular tops up to 36”Dcentered over feet. Corner basessupport Corner tops and rectangularworksurfaces with perpendicularreturns up to 30”D. 120° basessupport 120° tops up to 30”D.
Tone Height Adjustable Tables
23
Fixed HeightAdjustable Width Base
description type w* d pattern no. list price
24� Deep C-Leg Bases Small - For use with 30� - 54� wide tops 293/4� - 451/4� 22� TBCFAS22( )( ) $1,370.Medium - For use with 42� - 78� wide tops 413/4� - 691/4� 22� TBCFAM22( )( ) 1,395.Large - For use with 66� - 96� wide tops 611/4� - 891/4� 22� TBCFAL22( )( ) 1,420.
30� Deep C-Leg Bases Small - For use with 30� - 54� wide tops 293/4� - 451/4� 28� TBCFAS28( )( ) 1,444.Medium - For use with 42� - 78� wide tops 413/4� - 691/4� 28� TBCFAM28( )( ) 1,469.Large - For use with 66� - 96� wide tops 611/4� - 891/4� 28� TBCFAL28( )( ) 1,492.
30� Deep T-Leg Bases Small - For use with 30� - 54� wide tops 293/4� - 451/4� 28� TBTFAS28( )( ) 1,444.Medium - For use with 42� - 78� wide tops 413/4� - 691/4� 28� TBTFAM28( )( ) 1,469.Large - For use with 66� - 96� wide tops 611/4� - 891/4� 28� TBTFAL28( )( ) 1,492.
Corner Bases Small - For use with corner tops or rectangularworksurfaces with perpendicular returns. Max60� on each side.
351/4� - 501/2� 16� TBKFAS16( )( ) 2,007.
Medium - For use with corner tops orrectangular worksurfaces with perpendicularreturns. Max 84� on each side.
471/4� - 741/2� 16� TBKFAM16( )( ) 2,032.
Small/Medium - For use with Extended cornertops or rectangular worksurfaces withperpendicular returns. Max 60� wide on one sideand 84� wide on the other.
351/4� - 501/2�471/4� - 741/2�
16� TBKFASM16( )( ) 2,032.
120° Base For use with 48�, 54� and 60�W 120° Tops 431/4� - 581/2� 16� TBVFAS16( )( ) 2,032.
Order Code
C-Leg and T-Leg Bases
Example: TBCFAM22C,613
TB Tone BaseC C-LegF FixedA Adjustable WidthM Medium22 DepthC Casters613 Silver Finish
Specification Information
1. Glides or Casters:Add a ‘‘G’’ Suffix to the patternnumber to specify Glides. Or adda ‘‘C’’ to specify Casters. Add$69 list for casters.
2. Base Finish:All core paint finishes areavailable
Application Notes
Bases are designed for use withcorresponding worksurfaces tocreate freestanding tables.Worksurfaces must be specifiedseparately.
A stiffener is recommended onworksurfaces that are 72� or wider.
Base comes with worksurfacemounting hardware.
Privacy screens can only bespecified with glides.
22”D and 23”D C-Leg basessupport rectangular tops up to24”D. 28”D and 29”D C-Leg basessupport rectangular tops up to30”D. 28”D and 30”D T-Leg basessupport rectangular tops up to 36”Dcentered over feet. Corner basessupport Corner tops and rectangularworksurfaces with perpendicularreturns up to 30”D. 120° basessupport 120° tops up to 30”D.
Tone Height Adjustable Tables
24
Antenna Workspaces WorksurfacesC-Leg and T-Leg Tables24�, 30� and 36� Deep Rectangular
description type w* w d h pattern no. L V1 V2 V3
Antenna C-Leg Tops, 24� Deep For use with 24�D C-Leg Base 42� 39� 24� 11/4� TTYR3924( ) $300. $555. $640. $861.48� 45� 24� 11/4� TTYR4524( ) 336. 579. 666. 902.54� 51� 24� 11/4� TTYR5124( ) 364. 618. 711. 961.60� 57� 24� 11/4� TTYR5724( ) 392. 657. 758. 1,024.66� 63� 24� 11/4� TTYR6324( ) 424. 685. 787. 1,063.72� 69� 24� 11/4� TTYR6924( ) 441. 710. 820. 1,104.78� 69� 24� 11/4� TTYR7524( ) 476. 744. 857. 1,156.
Antenna C-Leg and T-Leg Tops, 30� Deep For use with 30�D C-Leg Base 42� 39� 30� 11/4� TTYR3930( ) 354. 607. 698. 941.
For use with 30�D C-Leg or T-Leg Bases 48� 45� 30� 11/4� TTYR4530( ) 392. 652. 751. 1,011.54� 51� 30� 11/4� TTYR5130( ) 445. 692. 794. 1,072.60� 57� 30� 11/4� TTYR5730( ) 490. 730. 838. 1,134.66� 63� 30� 11/4� TTYR6330( ) 547. 744. 857. 1,156.72� 69� 30� 11/4� TTYR6930( ) 566. 770. 885. 1,196.78� 75� 30� 11/4� TTYR7530( ) 606. 813. 921. 1,247.
Antenna T-Leg Tops, 36� Deep For use with 30�D T-Leg Base 48� 45� 36� 11/4� TTYR4536( ) 430. 704. 811. 1,093.54� 51� 36� 11/4� TTYR5136( ) 488. 744. 857. 1,156.60� 57� 36� 11/4� TTYR5736( ) 540. 783. 901. 1,215.66� 63� 36� 11/4� TTYR6336( ) 601. 823. 944. 1,274.72� 69� 36� 11/4� TTYR6936( ) 622. 861. 990. 1,337.78� 75� 36� 11/4� TTYR7536( ) 664. 901. 1,036. 1,397.
Antenna 120° Tops For use with 24�D C-Leg 120° Bases 48� 47� 24� 11/4� TTYV4724( ) 861. 1,899. 2,184. 2,839.54� 53� 24� 11/4� TTYV5324( ) 918. 2,007. 2,310. 3,001.60� 59� 24� 11/4� TTYV5924( ) 1,062. n/a n/a n/a
For use with 27�D C-Leg 120° Bases 48� 47� 27� 11/4� TTYV4727( ) 874. 1,930. 2,221. 2,887.54� 53� 27� 11/4� TTYV5327( ) 1,017. n/a n/a n/a60� 59� 27� 11/4� TTYV5927( ) 1,078. n/a n/a n/a
* Nominal Width
Order Code
Example: TTYR5724L118118
TT Tone TopY AntennaR Rectangular57 Width24 DepthL Laminate118 Bright White Laminate118 Bright White Edge
Application Notes
Worksurfaces on this page aredesigned for use with fixed andheight adjustable C-Leg and T-Legbases to create freestanding tables.
24�, 30� and 36� rectangularworksurfaces are for use withcorresponding depth fixed andheight adjustable C-Leg bases andT-Leg bases.
120° Tops are for use with 16�D3-legged 120° bases.
Worksurfaces are pre-drilled withpilot holes for use with wood screws.
Actual worksurfaces are undersizedby 11/2� on each side edge.
Options
Top finish Options:Add an (L) for laminate or (V) forveneer suffix to pattern number.
Tone Height Adjustable Tables
25
AutoStrada WorksurfacesC-Leg and T-Leg Tables24�, 30� and 36� Deep Rectangular
description type w* w d* d h pattern no. L M V1 V2 V3
AutoStrada C-Leg Tops, 24� Deep For use with 24�D C-Leg Base 42� 40� 24 23� 11/4� TTAR4023( )N $521. $699. $768. $811. $1,055.48� 46� 24 23� 11/4� TTAR4623( )N 577. 751. 823. 869. 1,130.54� 52� 24 23� 11/4� TTAR5223( )N 582. 801. 879. 931. 1,210.60� 58� 24 23� 11/4� TTAR5823( )N 611. 858. 940. 995. 1,292.66� 64� 24 23� 11/4� TTAR6423( )N 662. 890. 976. 1,027. 1,337.72� 70� 24 23� 11/4� TTAR7023( )N 681. 927. 1,016. 1,077. 1,401.78� 76� 24 23� 11/4� TTAR7623( )N 701. 969. 1,063. 1,130. 1,469.
AutoStrada C-Leg/T-Leg Tops, 30� Deep For use with 30�D C-Leg Base 42� 40� 30� 29� 11/4� TTAR4029( )N 533. 788. 865. 916. 1,191.
For use with 30�D C-Leg or T-Leg Base 48� 46� 30� 29� 11/4� TTAR4629( )N 591. 845. 926. 983. 1,280.54� 52� 30� 29� 11/4� TTAR5229( )N 607. 912. 1,001. 1,060. 1,379.60� 58� 30� 29� 11/4� TTAR5829( )N 645. 947. 1,039. 1,098. 1,427.66� 64� 30� 29� 11/4� TTAR6429( )N 693. 968. 1,062. 1,124. 1,462.72� 70� 30� 29� 11/4� TTAR7029( )N 715. 994. 1,090. 1,153. 1,499.78� 76� 30� 29� 11/4� TTAR7629( )N 741. 1,038. 1,139. 1,209. 1,569.
AutoStrada T-Leg Tops, 36� Deep For use with 30�D T-Leg Base 48� 46� 36� 35� 11/4� TTAR4635( )N 579. 893. 980. 1,040. 1,350.54� 52� 36� 35� 11/4� TTAR5235( )N 639. 955. 1,045. 1,111. 1,446.60� 58� 36� 35� 11/4� TTAR5835( )N 665. 1,052. 1,153. 1,213. 1,576.66� 64� 36� 35� 11/4� TTAR6435( )N 737. 1,056. 1,159. 1,232. 1,600.72� 70� 36� 35� 11/4� TTAR7035( )N 762. 1,087. 1,192. 1,262. 1,642.78� 76� 36� 35� 11/4� TTAR7635( )N 798. 1,110. 1,217. 1,295. 1,683.
* Nominal
Order Code
Example: TTAR4623( )N118
TT Tone TopA AutoStradaR Rectangular46 Width23 DepthL LaminateN No Grommet118 Bright White Laminate
Application Notes
Worksurfaces on this page aredesigned for use with fixed andheight adjustable C-Leg and T-Legbases to create freestanding tables.
24�, 30� and 36� rectangularworksurfaces are for use withcorresponding depth fixed andheight adjustable C-Leg bases andT-Leg bases.
24� and 30� worksurfaces are useredge tapered. 36� worksurfaces areuser and approach edges tapered.
Worksurfaces are pre-drilled withpilot holes for use with wood screws.
Actual worksurfaces are undersizedby 1� on each side edge and by 1�on the back edge.
Options
Top finish Options:Add an (L) for laminate or (V) forveneer suffix to pattern number.
Tone Height Adjustable Tables
26
Dividends Horizon WorksurfacesC-Leg and T-Leg Tables24�, 30� and 36� Deep Rectangular and Curvilinear Corners
description type w* w d* d h pattern no.
Laminatew/ ABS
edge
Laminate w/woodgrain
edge
Techwood w/Techwood
edge
Dividends Horizon C-Leg Tops,24� Deep
For use with 24�D C-Leg Base 42� 40� 24� 23� 11/4� TTDR4023N $302. $331. $577.48� 46� 24� 23� 11/4� TTDR4623N 336. 372. 606.54� 52� 24� 23� 11/4� TTDR5223N 366. 402. 639.60� 58� 24� 23� 11/4� TTDR5823N 397. 434. 670.66� 64� 24� 23� 11/4� TTDR6423N 425. 468. 698.72� 70� 24� 23� 11/4� TTDR7023N 444. 491. 729.78� 76� 24� 23� 11/4� TTDR7623N 478. 524. 764.
Dividends Horizon C-Leg/T-Leg Tops,30� Deep
For use with 30�D C-Leg Base 42� 40� 30� 29� 11/4� TTDR4029N 356. 390. 628.
For use with 30�D C-Leg or T-Leg Base 48� 46� 30� 29� 11/4� TTDR4629N 397. 434. 667.54� 52� 30� 29� 11/4� TTDR5229N 448. 492. 696.60� 58� 30� 29� 11/4� TTDR5829N 493. 544. 726.66� 64� 30� 29� 11/4� TTDR6429N 548. 604. 754.72� 70� 30� 29� 11/4� TTDR7029N 570. 624. 781.78� 76� 30� 29� 11/4� TTDR7629N 608. 674. 820.
Dividends Horizon T-Leg Tops,36� Deep
For use with 30�D T-Leg Base 48� 46� 36� 35� 11/4� TTDR4635N 518. 556. 791.54� 52� 36� 35� 11/4� TTDR5235N 572. 616. 821.60� 58� 36� 35� 11/4� TTDR5835N 631. 694. 861.66� 64� 36� 35� 11/4� TTDR6435N 697. 770. 891.72� 70� 36� 35� 11/4� TTDR7035N 770. 848. 924.78� 76� 36� 35� 11/4� TTDR7635N 820. 870. 931.
* Nominal
Order Code
Example: TTDR4029NL118
TT Tone TopD Dividends HorizonR Rectangular40 Width29 DepthN No Grommet118 Bright White Laminate118 Bright White Laminate
Application Notes
Worksurfaces on this page aredesigned for use with fixed andheight adjustable C-Leg, T-Leg andcorner bases to create freestandingtables.
24�, 30� and 36� rectangularworksurfaces are for use withcorresponding depth fixed andheight adjustable C-Leg bases andT-Leg bases.
Corner tops are for use with 16�D3-legged fixed width Corner Base.120° tops are for use with 16�D3-legged 120° bases.
Worksurfaces are pre-drilled withpilot holes for use with wood screws.
Actual worksurfaces are undersizedby 1� on each side edge and by 1�on the back edge.
Options
Top Finish Options:Laminate with ABS edgeLaminate with woodgrain edgeTechwood with techwood edge
Note: When woodgrain laminatesare specified on cornerworksurfaces a grain directionoption must be specified.(L) = Left(R) = Right(D) = Diagonal (Add $27 to listprice)
Note: Techwood cornerworksurfaces have a diagonal graindirection. See grain direction pagefor more information.
Tone Height Adjustable Tables
27
Dividends Horizon WorksurfacesC-Leg and T-Leg Tables24�, 30� and 36� Deep Rectangular and Curvilinear Corners
description type w* w d* d h pattern no.
Laminatew/ ABS
edge
Laminate w/woodgrain
edge
Techwood w/Techwood
edge
Dividends Horizon 120° Tops,24� Deep
For use with 120° Base 48� 46� 24� 23� 11/4� TTDV4623N $982. $1,076. n/a
Dividends Horizon Corner Tops,24� or 30� Deep
For use with C-Leg Corner Base 48� 46� 24� 23� 11/4� TTDK464623N 698. 773. 1,333.48� 46� 30� 29� 11/4� TTDK464629N 754. 830. 1,349.
* Nominal
Order Code
Example: TTDR4029NL118
TT Tone TopD Dividends HorizonR Rectangular40 Width29 DepthN No Grommet118 Bright White Laminate118 Bright White Laminate
Application Notes
Worksurfaces on this page aredesigned for use with fixed andheight adjustable C-Leg, T-Leg andcorner bases to create freestandingtables.
24�, 30� and 36� rectangularworksurfaces are for use withcorresponding depth fixed andheight adjustable C-Leg bases andT-Leg bases.
Corner tops are for use with 16�D3-legged fixed width Corner Base.120° tops are for use with 16�D3-legged 120° bases.
Worksurfaces are pre-drilled withpilot holes for use with wood screws.
Actual worksurfaces are undersizedby 1� on each side edge and by 1�on the back edge.
Options
Top Finish Options:Laminate with ABS edgeLaminate with woodgrain edgeTechwood with techwood edge
Note: When woodgrain laminatesare specified on cornerworksurfaces a grain directionoption must be specified.(L) = Left(R) = Right(D) = Diagonal (Add $27 to listprice)
Note: Techwood cornerworksurfaces have a diagonal graindirection. See grain direction pagefor more information.
Tone Height Adjustable Tables
28
Morrison WorksurfacesC-Leg and T-Leg Tables24�, 30� and 36� Deep Rectangular and Curvilinear Corners
description type w* w d* d h pattern no. L V1 V2
Morrison C-Leg Tops, 24� Deep For use with 24�D C-Leg Base 42� 40� 24� 23� 11/4� TTMR4023( ) $442. $739. $1,099.48� 46� 24� 23� 11/4� TTMR4623( ) 485. 799. 1,254.54� 52� 24� 23� 11/4� TTMR5223( ) 532. 898. 1,372.60� 58� 24� 23� 11/4� TTMR5823( ) 574. 941. 1,441.66� 64� 24� 23� 11/4� TTMR6423( ) 621. 1,039. 1,594.72� 70� 24� 23� 11/4� TTMR7023( ) 665. 1,108. 1,746.78� 76� 24� 23� 11/4� TTMR7623( ) 708. 1,143. 1,821.
Morrison C-Leg/T-Leg Tops, 30� Deep For use with 30�D C-Leg Base 42� 40� 30� 29� 11/4� TTMR4029( ) 505. 825. 1,270.
For use with 30�D C-Leg or T-Leg Base 48� 46� 30� 29� 11/4� TTMR4629( ) 553. 894. 1,368.54� 52� 30� 29� 11/4� TTMR5229( ) 595. 992. 1,492.60� 58� 30� 29� 11/4� TTMR5829( ) 640. 1,061. 1,617.66� 64� 30� 29� 11/4� TTMR6429( ) 684. 1,127. 1,763.72� 70� 30� 29� 11/4� TTMR7029( ) 750. 1,220. 1,884.78� 76� 30� 29� 11/4� TTMR7629( ) 797. 1,284. 1,982.
Morrison T-Leg Tops, 36� Deep For use with 30�D T-Leg Base 48� 46� 36� 35� 11/4� TTMR4635( ) 621. 989. 1,483.54� 52� 36� 35� 11/4� TTMR5235( ) 657. 1,090. 1,614.60� 58� 36� 35� 11/4� TTMR5835( ) 709. 1,183. 1,792.66� 64� 36� 35� 11/4� TTMR6435( ) 742. 1,216. 1,932.72� 70� 36� 35� 11/4� TTMR7035( ) 833. 1,332. 2,020.
Morrison Corner Tops, 24� or 30� Deep For use with C-Leg Corner Base 48� 46� 24� 23� 11/4� TTMK464623( ) 1,146. 1,560. 2,294.48� 46� 30� 29� 11/4� TTMK464629( ) 1,146. 1,560. 2,294.
* Nominal
Order Code
Example: TTMR4635L118
TT Tone TopM MorrisonR Rectangular46 Width35 DepthL Laminate118 Bright White Laminate
Application Notes
Worksurfaces on this page aredesigned for use with fixed andheight adjustable C-Leg, T-Leg andcorner bases to create freestandingtables.
24�, 30� and 36� rectangularworksurfaces are for use withcorresponding depth fixed andheight adjustable C-Leg bases andT-Leg bases.
Corner tops are for use with 16�D3-legged fixed width Corner Base.
Worksurfaces are pre-drilled withpilot holes for use with wood screws.
Actual worksurfaces are undersizedby 1� on each side edge and by 1�on the back edge.
Options
Top finish Options:Add an (L) for laminate or (V) forveneer suffix to pattern number.
Tone Height Adjustable Tables
29
Reff Profiles WorksurfacesC-Leg and T-Leg Tables24�, 30� and 36� Deep Rectangular and Curvilinear Corners
description type w* w d* d h pattern no. L V1 V2 V3
Reff Profiles C-Leg Tops, 24� Deep For use with 24�D C-Leg Base 42� 40� 24� 23� 11/4� TTRR4023N $466. $496. $572. $769.48� 46� 24� 23� 11/4� TTRR4623N 493. 535. 613. 826.54� 52� 24� 23� 11/4� TTRR5223N 527. 568. 655. 883.60� 58� 24� 23� 11/4� TTRR5823N 571. 610. 698. 945.66� 64� 24� 23� 11/4� TTRR6423N 584. 628. 724. 976.72� 70� 24� 23� 11/4� TTRR7023N 615. 657. 758. 1,023.78� 76� 24� 23� 11/4� TTRR7623N 641. 687. 795. 1,070.
Reff Profiles C-Leg/T-Leg Tops, 30� Deep For use with 30�D C-Leg Base 42� 40� 30� 29� 11/4� TTRR4029N 524. 561. 648. 876.
For use with 30�D C-Leg or T-Leg Base 48� 46� 30� 29� 11/4� TTRR4629N 561. 600. 688. 931.54� 52� 30� 29� 11/4� TTRR5229N 607. 650. 744. 1,004.60� 58� 30� 29� 11/4� TTRR5829N 628. 671. 771. 1,043.66� 64� 30� 29� 11/4� TTRR6429N 640. 686. 794. 1,069.72� 70� 30� 29� 11/4� TTRR7029N 659. 705. 808. 1,091.78� 76� 30� 29� 11/4� TTRR7629N 689. 736. 848. 1,143.
Reff Profiles T-Leg Tops, 36� Deep For use with 30�D T-Leg Base 48� 46� 36� 35� 11/4� TTRR4635N 653. 702. 809. 1,086.54� 52� 36� 35� 11/4� TTRR5235N 713. 765. 876. 1,177.60� 58� 36� 35� 11/4� TTRR5835N 723. 775. 889. 1,200.66� 64� 36� 35� 11/4� TTRR6435N 749. 801. 925. 1,247.72� 70� 36� 35� 11/4� TTRR7035N 775. 830. 955. 1,290.78� 76� 36� 35� 11/4� TTRR7635N 825. 885. 1,018. 1,375.
Reff Profiles Corner Tops, 24� or 30� Deep For use with C-Leg Corner Base 48� 46� 24� 23� 11/4� TTRK464623N 1,098. 1,213. 1,392. 1,878.48� 46� 30� 29� 11/4� TTRK464629N 1,229. 1,358. 1,557. 2,098.
* Nominal
Order Code
Example: TTRR5229NL118
TT Tone TopR Reff ProfilesR Rectangular52 Width29 DepthN No GrommetL Laminate118 Bright White Laminate
Application Notes
Worksurfaces on this page aredesigned for use with fixed andheight adjustable C-Leg, T-Leg andcorner bases to create freestandingtables.
23�, 29� and 35� rectangularworksurfaces are for use withcorresponding depth fixed andheight adjustable C-Leg bases andT-Leg bases.
Corner tops are for use with 16�D3-legged fixed width Corner Base.
Worksurfaces are pre-drilled withpilot holes for use with wood screws.
Actual worksurfaces are undersizedby 1� on each side edge and by 1�on the back edge.
Options
Top finish Options:Add an (L) for laminate or (V) forveneer suffix to pattern number.
Tone Height Adjustable Tables
30
Accessories
description type w d h pattern no. list
Digital Control Switch For Tone Standard Electric and ExtendedElectric
TB2DPD $356.
Cleat Plate For Tone Height Adjustable Table 25� 33/4� 21/4� TBCP 129.
Hinged Wire Cover For Tone Fixed and Adjustable-Width Bases 28� 71/2� 2� TBHCPC 135.
Snap-On Wire Cover For Tone Fixed Width Bases 28� 71/4� 21/2� TBSCPC 100.
Power Strip Plug strip with 10’ power cordFor Tone Height-Adjustable Tables
243/4� 2� 2� TBPS24 398.
Z-Manager For Tone Extended Electric Height Range TBZEX 212.For Tone Standrd Electric Height Range TBZES 206.
Order Code
Digital Control Switch
Example: TBCP
TB Tone BaseCP Cleat Plate
Specification Information
1. Digital Control Switch ships withwood screws, and 311/2� power cord.
2. Z-Manager must be specified foreither Tone Standard Electric orTone Extended Electric.
Application Notes
1. Digital Control Switch is nothanded.
2. Cleat Plate mounts between thecrossbars of Tone and can also bemounted behind the crossbars.
3. Z-Manager for Tone StandardElectric and Extended Electric Toneare installed from the underside ofthe worksurface to the underside ofthe foot on either side of the leg.Foot is pre-drilled to accept theZ-Manager.
The Tone Hinged Wire Coverincludes J-Brackets for mounting onthe outside of the Tone crossbars.The Snap-On Wire Cover frictionfits to Tone Fixed Width crossbarsand is not compatible with ToneAdjustable Width bases.
The Vertical Wire Manager managesthe table power cord.
Tone Height Adjustable Tables
31
Accessories
description type w d h pattern no. list
Vertical Wire Manager For Tone Extended Electric 1� 3/4� 161/2� TBVWMEX $32.For Tone Standard Electric 1� 3/4� 20� TBVWMES 32.
Casters Kit of 4, all locking 2� 11/2� 11/2� TBCAS 78.
Chicago 9� Power Cord For use in City of Chicago 108� TBPCH 44.
Worksurface Reinforcement 54� 4� DB1WR54 75.60� 4� DB1WR60 76.66� 4� DB1WR66 79.72� 4� DB1WR72 82.
Flat Brackets (Single Pack) For 30�D Worksurfaces 33/4� 2015/16� DB1F30SP 37.
For 24�D Worksurfaces 33/4� 145/8� DB1F24SP 32.
Flat Brackets (Pack of 10) For 30�D Worksurfaces 33/4� 2015/16� DB1F30TP 296.
For 24�D Worksurfaces 33/4� 145/8� DB1F24TP 258.
Worksurface Collision sensor For use with Tone Standard Electric andExtended Electric Bases
4� 61/4� 11/2� TBWCS 202.
Carpet Gripper Kit of 4, for use with Glides� 11/2� 1/2� TBCG 7.
Order Code
Digital Control Switch
Example: TBCP
TB Tone BaseCP Cleat Plate
Specification Information
1. Digital Control Switch ships withwood screws, and 311/2� power cord.
2. Z-Manager must be specified foreither Tone Standard Electric orTone Extended Electric.
Application Notes
1. Digital Control Switch is nothanded.
2. Cleat Plate mounts between thecrossbars of Tone and can also bemounted behind the crossbars.
3. Z-Manager for Tone StandardElectric and Extended Electric Toneare installed from the underside ofthe worksurface to the underside ofthe foot on either side of the leg.Foot is pre-drilled to accept theZ-Manager.
The Tone Hinged Wire Coverincludes J-Brackets for mounting onthe outside of the Tone crossbars.The Snap-On Wire Cover frictionfits to Tone Fixed Width crossbarsand is not compatible with ToneAdjustable Width bases.
The Vertical Wire Manager managesthe table power cord.
Tone Height Adjustable Tables
32
pattern no. page
DB1F24SP 32
DB1F24TP 32
DB1F30SP 32
DB1F30TP 32
DB1WR54 32
DB1WR60 32
DB1WR66 32
DB1WR72 32
TB2DPD 31
TBCAS 32
TBCEAL22 10
TBCEAL23 12
TBCEAL28 10
TBCEAL29 12
TBCEAM22 10
TBCEAM23 12
TBCEAM28 10
TBCEAM29 12
TBCEAS22 10
TBCEAS23 12
TBCEAS28 10
TBCEAS29 12
TBCEF3522 7
TBCEF3523 9
TBCEF3528 7
TBCEF3529 9
TBCEF4122 7
TBCEF4123 9
TBCEF4128 7
TBCEF4129 9
TBCEF4722 7
TBCEF4723 9
TBCEF4728 7
TBCEF4729 9
TBCEF5322 7
TBCEF5323 9
TBCEF5328 7
TBCEF5329 9
TBCEF5922 7
TBCEF5923 9
TBCEF5928 7
TBCEF5929 9
TBCEF6522 7
TBCEF6523 9
TBCEF6528 7
TBCEF6529 9
TBCEF7122 7
TBCEF7123 9
TBCEF7128 7
TBCEF7129 9
TBCEXAL22 15
TBCEXAL23 16
TBCEXAL28 15
TBCEXAL29 16
TBCEXAM22 15
TBCEXAM23 16
TBCEXAM28 15
TBCEXAM29 16
TBCEXAS22 15
TBCEXAS23 16
TBCEXAS28 15
pattern no. page
TBCEXAS29 16
TBCEXF3522 13
TBCEXF3523 14
TBCEXF3528 13
TBCEXF3529 14
TBCEXF4122 13
TBCEXF4123 14
TBCEXF4128 13
TBCEXF4129 14
TBCEXF4722 13
TBCEXF4723 14
TBCEXF4728 13
TBCEXF4729 14
TBCEXF5322 13
TBCEXF5323 14
TBCEXF5328 13
TBCEXF5329 14
TBCEXF5922 13
TBCEXF5923 14
TBCEXF5928 13
TBCEXF5929 14
TBCEXF6522 13
TBCEXF6523 14
TBCEXF6528 13
TBCEXF6529 14
TBCEXF7122 13
TBCEXF7123 14
TBCEXF7128 13
TBCEXF7129 14
TBCFAL22 24
TBCFAL28 24
TBCFAM22 24
TBCFAM28 24
TBCFAS22 24
TBCFAS28 24
TBCFF3522 23
TBCFF3528 23
TBCFF4122 23
TBCFF4128 23
TBCFF4722 23
TBCFF4728 23
TBCFF5322 23
TBCFF5328 23
TBCFF5922 23
TBCFF5928 23
TBCFF6522 23
TBCFF6528 23
TBCFF7122 23
TBCFF7128 23
TBCG 32
TBCHAL22 18
TBCHAL28 18
TBCHAM22 18
TBCHAM28 18
TBCHAS22 18
TBCHAS28 18
TBCHF3522 17
TBCHF3528 17
TBCHF4122 17
TBCHF4128 17
TBCHF4722 17
pattern no. page
TBCHF4728 17
TBCHF5322 17
TBCHF5328 17
TBCHF5922 17
TBCHF5928 17
TBCHF6522 17
TBCHF6528 17
TBCHF7122 17
TBCHF7128 17
TBCHXAL22 20
TBCHXAL28 20
TBCHXAM22 20
TBCHXAM28 20
TBCHXAS22 20
TBCHXAS28 20
TBCHXF3522 19
TBCHXF3528 19
TBCHXF4122 19
TBCHXF4128 19
TBCHXF4722 19
TBCHXF4728 19
TBCHXF5322 19
TBCHXF5328 19
TBCHXF5922 19
TBCHXF5928 19
TBCHXF6522 19
TBCHXF6528 19
TBCHXF7122 19
TBCHXF7128 19
TBCP 31
TBCPAL22 22
TBCPAL28 22
TBCPAM22 22
TBCPAM28 22
TBCPAS22 22
TBCPAS28 22
TBCPF3522 21
TBCPF3528 21
TBCPF4122 21
TBCPF4128 21
TBCPF4722 21
TBCPF4728 21
TBCPF5322 21
TBCPF5328 21
TBCPF5922 21
TBCPF5928 21
TBCPF6522 21
TBCPF6528 21
TBCPF7122 21
TBCPF7128 21
TBHCPC 31
TBKEAM16 11
TBKEAS16 11
TBKEASM16 11
TBKEF444416 8
TBKEXAM16 15
TBKEXAS16 15
TBKEXASM16 15
TBKEXF444416 13
TBKFAM16 24
TBKFAS16 24
pattern no. page
TBKFASM16 24
TBKFF444416 23
TBKPAM16 22
TBKPAS16 22
TBKPASM16 22
TBKPF444416 21
TBPCH 32
TBPS24 31
TBSCPC 31
TBTEAL28 10
TBTEAL30 12
TBTEAM28 10
TBTEAM30 12
TBTEAS28 10
TBTEAS30 12
TBTEF4128 7
TBTEF4130 9
TBTEF4728 7
TBTEF4730 9
TBTEF5328 7
TBTEF5330 9
TBTEF5928 7
TBTEF5930 9
TBTEF6528 7
TBTEF6530 9
TBTEF7128 7
TBTEF7130 9
TBTEXAL28 15
TBTEXAL30 16
TBTEXAM28 15
TBTEXAM30 16
TBTEXAS28 15
TBTEXAS30 16
TBTEXF4128 13
TBTEXF4130 14
TBTEXF4728 13
TBTEXF4730 14
TBTEXF5328 13
TBTEXF5330 14
TBTEXF5928 13
TBTEXF5930 14
TBTEXF6528 13
TBTEXF6530 14
TBTEXF7128 13
TBTEXF7130 14
TBTFAL28 24
TBTFAM28 24
TBTFAS28 24
TBTFF4128 23
TBTFF4728 23
TBTFF5328 23
TBTFF5928 23
TBTFF6528 23
TBTHAL28 18
TBTHAM28 18
TBTHAS28 18
TBTHF4128 17
TBTHF4728 17
TBTHF5328 17
TBTHF5928 17
TBTHF6528 17
Alpha-Numeric Index
33
pattern no. page
TBTHXAL28 20
TBTHXAM28 20
TBTHXAS28 20
TBTHXF4128 19
TBTHXF4728 19
TBTHXF5328 19
TBTHXF5928 19
TBTHXF6528 19
TBTPAL28 22
TBTPAM28 22
TBTPAS28 22
TBTPF4128 21
TBTPF4728 21
TBTPF5328 21
TBTPF5928 21
TBTPF6528 21
TBVEAS16 11
TBVEF454516 8
TBVEF515116 8
TBVEF575716 8
TBVFAS16 24
TBVFF454516 23
TBVFF515116 23
TBVFF575716 23
TBVPAS16 22
TBVPF454516 21
TBVPF515116 21
TBVPF575716 21
TBVWMES 32
TBVWMEX 32
TBWCS 32
TBZES 31
TBZEX 31
TTAR4023 26
TTAR4029 26
TTAR4623 26
TTAR4629 26
TTAR4635 26
TTAR5223 26
TTAR5229 26
TTAR5235 26
TTAR5823 26
TTAR5829 26
TTAR5835 26
TTAR6423 26
TTAR6429 26
TTAR6435 26
TTAR7023 26
TTAR7029 26
TTAR7035 26
TTAR7623 26
TTAR7629 26
TTAR7635 26
TTDK464623N 28
TTDK464629N 28
TTDR4023N 27
TTDR4029N 27
TTDR4623N 27
TTDR4629N 27
TTDR4635N 27
TTDR5223N 27
TTDR5229N 27
TTDR5235N 27
TTDR5823N 27
TTDR5829N 27
pattern no. page
TTDR5835N 27
TTDR6423N 27
TTDR6429N 27
TTDR6435N 27
TTDR7023N 27
TTDR7029N 27
TTDR7035N 27
TTDR7623N 27
TTDR7629N 27
TTDR7635N 27
TTDV4623N 28
TTMK464623 29
TTMK464629 29
TTMR4023 29
TTMR4029 29
TTMR4623 29
TTMR4629 29
TTMR4635 29
TTMR5223 29
TTMR5229 29
TTMR5235 29
TTMR5823 29
TTMR5829 29
TTMR5835 29
TTMR6423 29
TTMR6429 29
TTMR6435 29
TTMR7023 29
TTMR7029 29
TTMR7035 29
TTMR7623 29
TTMR7629 29
TTRK464623N 30
TTRK464629N 30
TTRR4023N 30
TTRR4029N 30
TTRR4623N 30
TTRR4629N 30
TTRR4635N 30
TTRR5223N 30
TTRR5229N 30
TTRR5235N 30
TTRR5823N 30
TTRR5829N 30
TTRR5835N 30
TTRR6423N 30
TTRR6429N 30
TTRR6435N 30
TTRR7023N 30
TTRR7029N 30
TTRR7035N 30
TTRR7623N 30
TTRR7629N 30
TTRR7635N 30
TTYR3924 25
TTYR3930 25
TTYR4524 25
TTYR4530 25
TTYR4536 25
TTYR5124 25
TTYR5130 25
TTYR5136 25
TTYR5724 25
TTYR5730 25
TTYR5736 25
pattern no. page
TTYR6324 25
TTYR6330 25
TTYR6336 25
TTYR6924 25
TTYR6930 25
TTYR6936 25
TTYR7524 25
TTYR7530 25
TTYR7536 25
TTYV4724 25
TTYV4727 25
TTYV5324 25
TTYV5327 25
TTYV5924 25
TTYV5927 25
Tone Height Adjustable Tables
34
This Selling Policy supercedes all previous selling policies. Prices, discounts and product offerings are subject to change without notice.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Terms & Conditions
of SalesSales by Knoll, Inc. or Knoll North America Corp. (‘‘Seller’’) of Knoll Product Lines (hereinafter ‘‘Products’’) within the United States and Canada are made onlyon the terms which are contained in this Selling Policy. Seller hereby gives notice of its objection to any different or additional terms and conditions. This sale isexpressly conditional upon Purchaser’s assent to the terms and conditions set forth below. Additional terms and conditions may apply to KnollStudio andKnollTextiles orders. These terms and conditions may be modified or supplemented only by a written document signed by an authorized representative of Seller.These terms and conditions supercede any prior and/or contemporaneous agreements or correspondence between Purchaser and Seller. Written quotationsexpire thirty (30) days from the date of issuance and can be withdrawn by written notice anytime during that period. Where Purchaser and Seller have enteredinto the Knoll Electronic Terms and Conditions, all orders, acknowledgements, invoices and other business communications placed or transmitted inaccordance with the Knoll Electronic Terms and Conditions shall be deemed to be in writing and signed and shall be valid for all purposes as if they wereoriginated and maintained in documentary form.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ordering Information All orders must be in writing. The product pattern number(s) contained on Seller’s order acknowledgement shall be the final expression of the order.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Order Confirmation A purchase order is not binding on Seller until Purchaser has received Seller’s order confirmation or acknowledgment.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pricing Policies List prices are subject to change without notice.List prices shall be those prices in effect on the date of receipt of a complete purchase order unless shipment is requested more than ninety (90) days after orderentry in which case prices in effect on the date of shipment apply. List prices include specified freight costs. Unless specified in writing by Seller, no othercharges are included in Seller’s list prices.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Taxes All sales, use, excise and other taxes applicable to the sale of the Products shall be paid by Purchaser. If Purchaser claims an exemption from any tax,Purchaser shall submit to Seller the appropriate exemption certificates.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Terms of Payment Payment for one hundred percent (100%) of the net order amount is due within thirty (30) days of the date of invoice, which is generally issued upon shipment.In case of any discrepancies, such as shortages, and Seller is notified in writing within ten (10) days of receipt of Product, only that portion may be deductedand the balance paid. For orders greater than $100,000 net, a fifty percent (50%) deposit is due at the time of order placement, with the remainder due withinthirty (30) days of the date of invoice.KnollStudio orders less than $2,000 require payment for one hundred percent (100%) of the net order amount (including any applicable sales tax and chargesfor inside delivery, special packaging, etc.), due at time of order placement. For KnollStudio orders greater than $2,000, a one-half (50%) deposit is due at timeof order placement with the remainder (including any applicable sales tax and charges for inside delivery, special packaging, etc.) due prior to shipment.If, in the judgment of Seller, Purchaser’s financial condition does not justify the terms of the payment, Seller may require full or partial payment in advance.Past due accounts shall be charged one and one-half percent (1.5%) per month, or the highest rate permitted by law, whichever is less, and will be added to theoutstanding balance. In the event Purchaser defaults on payment, Purchaser shall be liable for all collection costs, including reasonable attorney’s fees andcosts.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changes andCancellation
Purchase orders may not be changed or cancelled, in whole or in part, without prior written consent of Seller. Changes may effect delivery dates. Expensesincurred because of changes shall be charged to Purchaser. In the event of cancellations, Purchaser will be liable for reasonable cancellation chargesestablished by Seller. Orders for special Product, orders including ‘‘COM’’ (hereinafter defined) material and orders pursuant to expedited delivery programs,may not be canceled.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Freight Prepaid Freight is prepaid and included in the price of all Products, except KnollTextiles, within the 48 contiguous United States for orders placed with Knoll, Inc. andwithin Canada, excluding the Yukon, Northwest Territories, Nunavut and Newfoundland for orders placed with Knoll North America Corp. Packing is tested forrigorous motion and transportation but is not guaranteed to protect furniture from all conditions. If special packaging is required for any reason, please consultwith your sales representative or dealer. Seller shall select the method of shipment and routing. Freight for all KnollTextiles orders is prepaid and added to theinvoice.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Delivery/Freight Charges Shipments outside the contiguous 48 United States and Canada shall be shipped F.O.B. Origin.For shipments outside the contiguous United States and Canada, Purchaser is responsible for the cost of freight from point of embarkation, including anyhandling and transportation charges incidental to loading at the point of departure and unloading at the final destination.Conditions beyond the control of Seller, including weather, available facilities and traffic conditions, may affect exact time of delivery. Seller shall not beresponsible for specific carrier delivery date or time unless it has made a specific delivery commitment, in writing.Nonstandard methods of shipment and/or additional services are available upon request. Purchaser will be billed for the differential cost of any special servicesin excess of standard surface carrier freight costs. Premium charges, at Purchaser’s request, will be added for airfreight, exclusive use of vehicle and extra,export or special packaging. Accessorial charges will be added for inside delivery, extra labor, reconsignment and redelivery.Partial shipments may be made and invoiced by Seller.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Claims All shipments for Knoll Products within the contiguous United States and Canada are F.O.B. Origin. All risk of loss passes to Purchaser at time of delivery tocarrier. Purchaser shall inspect all Products upon receipt and notify Seller within ten (10) working days after receipt of any damage or defects which are, orshould be, apparent from an inspection of the Product and its packaging. Failure of Purchaser to notify Seller during the ten (10) working day period shallconstitute acceptance of the Products and waiver of any apparent defects, errors or shortages. For all claims relating to Product damaged in transit or for anyother claims relating to or arising out of the transportation of the Product, Purchaser must seek recovery from the carrier and Seller has no liability to Purchaserfor such claims. Seller may, upon request, assist Purchaser with filing of such claims with the carrier, but Seller will not be liable for any of these transportationrelated claims.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Seller’s Security Interest Until Seller receives the full payment for the Product, Seller shall have a security interest in the Product. Purchaser agrees to perform all acts, including but notlimited to the execution and filing of documentation, which may be necessary to perfect and assure the security interest of Seller.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Returns The return of Products without a written authorization by Seller shall not be accepted. To receive authorization for Product return, please call Customer Service.All Products that are returned pursuant to a valid authorization shall be subject to a twenty-five percent (25%) of list restocking charge. Products not currentlyoffered for sale by Seller (including COM) shall not be authorized for return. All returned Products must be unused, in original condition and in the originalSeller packing cartons. No refund or credit shall be given for damaged Products.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Held Orders/Storage If Purchaser requests that an order be held or delayed, prices and terms and conditions in effect at the time of shipment shall apply. If Purchaser requests adelay after the time when Seller can defer production, Purchaser will be invoiced for the Product, payable in accordance with standard terms, when the order isready for shipment. Seller may transfer the Product to storage, in which case all expenses incurred in connection with storage, including demurrage, preparationfor storage, storage charges and handling shall be payable by Purchaser upon submission of invoices by Seller. Risk of loss to the Product shall pass to thePurchaser upon delivery of the Product into storage.
Selling Policy
35March 15, 2019
Customer’s Own Material A Purchaser who requests a fabric or other surface material not standard to Seller’s line of Products (‘‘COM’’) must submit samples of the requested material toSeller prior to entry of a purchaser order. Seller shall determine if the material is suitable to its manufacturing processes and meets any requirements ofUnderwriters Laboratories. If the COM is acceptable, Seller will then establish a price for using the COM or the Product in question. For a description of theprocedures for submitting samples and testing, contact customer resources or your sales representative. Seller shall have no responsibility for the appearance,condition, performance, durability, colorfastness or any other physical attribute of the COM. Purchaser shall indemnify and hold Seller harmless for anydamages, injuries or losses arising out of or related to use of the COM on the Product.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Warranty Seller warrants to the original Purchaser only that the Products Seller manufactures and sells to Purchaser are free of defects in workmanship and materials,during the applicable warranty period set forth below.Warranty period set forth below is for 24-hour, 7 days a week, multi shift use (includes parts and labor to repair).Should any failure to conform with this limited warranty appear to a Product listed below during the applicable warranty period from the date of shipment, Sellershall, upon prompt written notice, repair or replace, at its option and costs, the affected part or parts.Product and Period of WarrantyLifetime: Antenna Workspaces, AutoStrada, Calibre, Crinion Open Table, Currents, Dividends Horizon, Morrison, Reff Profiles laminate, Rockwell Unscripted,Series 2 Storage, Template and other non-wood components (except cascade edge worksurfaces, operational parts, controls, electrical, Lighting, Series 2 VeneerFront Storage, uphostery, textiles and leathers, special or custom products, see below)12 Years: Chadwick, Generation by Knoll, k. task, Life, Moment, MultiGeneration by Knoll, Ollo, ReGeneration by Knoll, Remix, and Toboggan seating (exceptseating upholstery, textiles, leathers and finishes, see below).10 Years: Anchor Storage except digital keypad lock, Antenna Workspaces, AutoStrada, Crinion Open Table, Dividends Horizon, Dividends Horizon SatelliteSurfaces, Reff Profiles, Rockwell Unscripted, Template wood components, Series 2 Veneer Front Storage, cascade edge worksurfaces, Wood Casegoods (TheGraham Collection) (except wood casegoods upholstered surfaces, see below), Reuter overheads, Reuter vertical storage, KnollExtra Sapper Monitor ArmCollection, Sapper XYZ Monitor Arm Series, Adjustable keyboard mechanisms and platforms, Communication Boards (except fabric board textiles, cork andFilzFelt, see below), Smokador collection (except leathers, see below), Orchestra Universal Systems Accessories, k. lounge structural components, KnollStudioPixel and Propeller, Tone bases.5 Years: Operational parts, controls, electrical, Lighting (except light ballasts, bulbs and power supply, see below), special or custom product, wood veneerproducts and plywood, Currents handcrank, KnollStudio, Rockwell Unscripted wire bases, Spark Series seating structural elements, structural elements of allKnollStudio outdoor products including all Richard Schultz designed products, KnollExtra CPU holders and all universal storage drawers and Power Collection,k. bench (except changes in finish, see below) and k. stand bases (except changes in finish, see below).3 Years: Rockwell Unscripted upholstery (except textiles and leather), Office Seating upholstery, textiles, leathers and finishes. Fabric boards textiles andSmokador Collection leathers, KnollExtra Pop Up Screens.2 Years: Anchor Storage digital keypad lock, all other KnollExtra product1 Year: Light ballasts, bulbs and power supply, seating upholstered armpads and soft armpads, wood casegoods upholstered surfaces. KnollStudio, outdoorproduct finishes, k. lounge upholstery and k. lounge fabric. Rockwell Unscripted fabric and accessories.This warranty does not apply to:• Damage caused by a carrier other than the Seller.• Normal wear and tear or acts or omissions of parties other than Seller (including user modification, improper use or installation of Products).• COM or other third party materials applied to Products.• Products not installed by or under the auspices of a Knoll Dealer.• Dramatic temperature variations or exposure to unusual conditions.• Changes in surface finishes, including colorfastness due to aging or exposure to light.• Except as specifically noted above, textiles and upholstery supplied by KnollTextiles and Spinneybeck FilzFelt (consult current price lists for applicable
warranties).Natural variations occurring in wood, marble, and leather shall not be considered defects, and the Seller does not guarantee the colorfastness or matching of thecolors, grains or textures, or surface hardness of such materials. The Seller also does not guarantee the colorfastness of fiberglass panel surfaces.THE EXPRESS WARRANTIES CONTAINED HEREIN ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANYWARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OFDEALING OR USAGE OF TRADE.The remedies provided above are the Purchaser’s sole remedies for any failure of Seller to comply with its obligations regarding the workmanship of itsProducts. Correction of any nonconformity in the manner and for the period of time provided shall constitute complete fulfillment of all liabilities of Seller, withrespect to or arising out of the Product furnished hereunder.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Delay/Force Majeure Seller shall not be liable for failure to perform or for delay in performance due to fire, flood, strike or other labor difficulty, act of God, act of war or terrorism, actof any governmental authority or of the Purchaser, riot, embargo, fuel or energy shortage, wrecks or delay in transportation, inability to obtain necessary labor,materials or manufacturing facilities from usual sources or failure of suppliers to meet their contractual obligations, or due to any cause beyond its reasonablecontrol. If any such event occurs, Seller may extend delivery dates by a period of time necessary to overcome the effect of such delay, allocate available Productor cancel any purchase order.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Compliance with Law PURCHASER IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL APPLICABLE FEDERAL, STATE AND LOCAL LAWS, ORDINANCES,REGULATIONS, RULES AND STANDARDS RELATING TO THE INSTALLATION, MAINTENANCE, USE AND OPERATION OF THE PRODUCTS.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Patents Subject to the following provisions, Seller shall, at its own expense, defend or, at its option, settle any claim, suit or proceeding brought against the Purchaser,and/or its vendees, mediate and immediate, so far as based on an allegation that any Product or any part thereof furnished hereunder constitutes a direct or acontributory infringement of any claim of any patent of the United States or Canada. This obligation shall be effective only if Purchaser shall have made allpayments then due hereunder and if Seller is notified promptly in writing and given authority, information and assistance for the defense of said claim, suit orproceeding. Seller shall pay all damages and costs awarded in such suit or proceedings so defended.The foregoing indemnity does not apply to the following:• Products supplied according to a design other than that of Seller, and which is required by the Purchaser.• Combination of the Product with another product not furnished hereunder unless Seller is a contributory infringer.• Any settlements of a suit or proceeding made without Seller’s written consent.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Limitations of Liability SELLER, ITS CONTRACTORS, AUTHORIZED DEALERS AND SUBCONTRACTORS OR SUPPLIERS OF ANY TIER SHALL NOT BELIABLE TO PURCHASER FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM A BREACHOF THIS AGREEMENT.Purchaser’s remedies set forth herein are exclusive and the liability of Seller with respect to the breach of this agreement or any contract entered into betweenthe parties pursuant hereto shall not exceed the price of the Product or part on which such liability is based.
Selling Policy
36March 15, 2019
General Ordering Information
The ProductsThis guide encompasses all standard products for this product group.
SizesDimensions listed in this guide are indicated as:H = heightW = widthD = depthDia. = diameterRad. = radius
PricingAll prices shown are list.
How to OrderSelect pattern numbers and quantities required for your complete installation. Product questions can beaddressed in the specific sections of this guide or by contacting your sales representative or customerresource representative at 1-800-343-5665.
Next, select options (if required), along with colors and finishes appropriate to each product. Reference theFinishes and Fabrics pages for color designations.
On large installations, an item’s ‘‘designated area’’ can be specified to assist in product organization andhandling.
To expedite complete / correct entry of your order, be certain all pattern numbers, quantities, colors andarea identifications are completely specified. Also, include complete purchase order numbers, bill-to andship-to addresses, a contact name and specific factory shipping dates required.
Mail all orders to:Knoll, Inc.1235 Water StreetP.O. Box 157East Greenville, PA 18041Attention: Order Entry
Once your order is entered at Knoll, an acknowledgment will be mailed to you. You will be advised of yourscheduled shipping date within five days of the original acknowledgment. If it is necessary to revise yourorder, please contact your customer resource representative.
Sustainability Statement
Sustainable design is a key component of Knoll’s environmental focus. Our commitment to socialresponsibility and a healthy environment has prompted us to further articulate our longstandingenvironmental programs and, with encouragement and support from our colleagues in the industry, we havere-energized our focus on such ‘‘green’’ initiatives as life cycle analysis and LEED™ certification. Knoll isproud to have contributed to projects that have received LEED certification from the U.S. Green BuildingCouncil.
For the latest information on Knoll products that help our customers achieve LEED certification, log on toknoll.com, click on ‘‘About Knoll’’ and then ‘‘Environmental Focus.’’
37