Tobee TL Slurry Pump Technical Specifcations
1
Tobee ® TL Slurry Pumps Technical Specifications Rugged heavy duty slurry pump for medium to lower heads The Tobee ® TL series slurry pumps incorporate the same design points as the Tobee ® TH slurry pump plus higher efficiency impellers at an attractive initial cost. Designed for rugged duties while offering higher efficiencies, the TL series is a combination of the proven TH slurry pump’s unique features. The TL series provides the widest range of hydraulics from the ” to a 26” discharge pumps. The ” is perfect for the laboratory or in demonstration plants. Design Features • Heavy duty construction with through-bolt design provides ease of maintenance and minimal downtime • Ductile iron fully lined casing provides durability, strength, safety, and long service life • Large diameter, slow turning, high efficiency impellers designed to achieve maximum wear life and low operating costs • Large, open internal passages designed to reduce internal velocities, maximise wear life and lower operating costs • Thick elastomer or alloy bolt-in liners provide superior corrosion resistance plus offer ease of liner change-out and interchangeability to reduce overall maintenance costs and maximise wear life • Designed for rugged duties while offering excellent efficiencies • Minimal shaft/impeller overhang reduces shaft deflection and increases packing life • Cartridge-style bearing assembly allows for maintenance in a clean environment without removal of the pump, resulting in reliable operation and prolonged bearing life • Grease or oil lubrication bearing assembly options offer ease of maintenance and reduced downtime • Full flush gland, low flow, and dry running centrifugal seals reduce flush water usage minimising pump operating costs • Mechanical seals reduce flush water usage, minimising pump operating costs Specifications • Size range (discharge): .75” to 26” (20 mm to 650 mm) • Capacities to: 45,000 gpm (10,225 m3/hr) • Heads to: 180 ft (55 m) • Pressures to: 250 psi (1,725 kPa) Note: * Product specifications are subject to regional variations. Tobee ® TL slury pumps – quick selection guide Approximate clear water performance - to be used for preliminary selection only. Cubic meters per hour (m 3 /hr) US gallons per minute (gpm) Total head (ft) Total head (m) 5000 10000 3000 2000 1000 700 500 1500 200 100 50 10 20 300 60 55 45 50 40 35 30 25 20 15 10 5 4 5 3 2 1.5 10000 180 160 200 7 8 6 4 3 5 2 1.5 8 1000 5 34 2 100 0 60000 6 120 100 60 40 80 5 0 20 140 9 50 20 100 75 200 150 300 250 400 350 500 650 450 550 Tobee ® TL slurry pumps HEBEI TOBEE PUMP CO.,LIMITED Mob:+86-18731151301 | Fax:+86-0311-87221317 Email:[email protected] Web:www.tobeepump.com
description
Tobee® TL Light Duty Slurry Pumps are higher efficient centrifugal slurry pumps, Designed for handling light abrasive and low concentration slurries.It is widely used in mining, minerals processing, paper-making, coal washing, power plant, metallurgy, petrochemical, building material, dredging, and other industrial fields etc. TL slurry pumps operate in high speed with small volumes to save floor area, the metal lined and rubber lined are interchangeable, Impeller adopts hyper chrome alloys or rubber etc.
Transcript of Tobee TL Slurry Pump Technical Specifcations
Tobee® TL Slurry PumpsTechnical Specifications
Rugged heavy duty slurry pump for medium to lower heads
The Tobee® TL series slurry pumps incorporate the same design points as the Tobee® TH slurry pump plus higher efficiency impellers at an attractive initial cost.
Designed for rugged duties while offering higher efficiencies, the TL series is a combination of the proven TH slurry pump’s unique features. The TL series provides the widest range of hydraulics from the 3/4” to a 26” discharge pumps. The 3/4” is perfect for the laboratory or in demonstration plants.
Design Features
• Heavy duty construction withthrough-bolt design provides ease ofmaintenance and minimal downtime
• Ductile iron fully lined casingprovides durability, strength, safety,and long service life
• Large diameter, slow turning, highefficiency impellers designed toachieve maximum wear life and lowoperating costs
• Large, open internal passagesdesigned to reduce internalvelocities, maximise wear life andlower operating costs
• Thick elastomer or alloy bolt-inliners provide superior corrosionresistance plus offer ease of linerchange-out and interchangeabilityto reduce overall maintenance costsand maximise wear life
• Designed for rugged duties whileoffering excellent efficiencies
• Minimal shaft/impeller overhangreduces shaft deflection andincreases packing life
• Cartridge-style bearing assemblyallows for maintenance in a cleanenvironment without removal of thepump, resulting in reliable operationand prolonged bearing life
• Grease or oil lubrication bearingassembly options offer ease ofmaintenance and reduced downtime
• Full flush gland, low flow, and dryrunning centrifugal seals reduceflush water usage minimising pumpoperating costs
• Mechanical seals reduce flush waterusage, minimising pump operatingcosts
Specifications
• Size range (discharge):.75” to 26” (20 mm to 650 mm)
• Capacities to: 45,000 gpm (10,225 m3/hr)
• Heads to: 180 ft (55 m)
• Pressures to: 250 psi (1,725 kPa)
Note: * Product specifications are subject to regional variations.
Tobee® TL slury pumps – quick selection guide Approximate clear water performance - to be used for preliminary selection only.
Cubic meters per hour (m3/hr)
US gallons per minute (gpm)
Tota
l hea
d (f
t)
Total head (m)
5000 10000300020001000700500 15002001005010 20 300
60
55
45
50
40
35
30
25
20
15
10
5
4 5321.510000
180
160
200
7 8643 521.581000
53 421000 60000
6
120
100
60
40
80
5 0
20
140
9
50
20
100
75
200
150
300
250 400
350
500
650450
550
Tobee® TL slurry pumps
HEBEI TOBEE PUMP CO.,LIMITEDMob:+86-18731151301 | Fax:+86-0311-87221317 Email:[email protected] Web:www.tobeepump.com
