To Customer P/N UDE P/N U2D0-ZZ-0001 Description 1394 6Pin ... · Spec No. : U2D017001-00...
Transcript of To Customer P/N UDE P/N U2D0-ZZ-0001 Description 1394 6Pin ... · Spec No. : U2D017001-00...
Approved Checked Prepared
Contact Area : Gold Flash
Description: 1394 6Pin over USB 2.0 Right Angle, Through Hole
Matte Tin over Nickel
To:
UDE P/N: U2D0-ZZ-0001
Customer P/N:
Spec No. Update Date Revision
U2D017001-00 2017/6/21 A
Spec No. : U2D017001-00 U2D0-ZZ-00011. MECHANICAL DIMENSION
1.1 Product Dimension
www.ude-corp.com2017/6/21 - 1 -
General Tolerance:Unit:mm ± 0.38± 0.25
X.X :X.XX :
Spec No. : U2D017001-00 U2D0-ZZ-00011.2 Recommended PCB Layout
Component Side of Board
All dimension tolerances are ±0.05mm unless otherwise specified
1.3 Packing Information
40 pcs finished goods per tray
6 trays(240 pcs finished goods) per inner box
4 Inner boxes(960 pcs finished goods) per master carton
www.ude-corp.com2017/6/21 - 2 -
Spec No. : U2D017001-00 U2D0-ZZ-00011.4
www.ude-corp.com2017/6/21
1394 6pin Plug Specification
- 3 -
All dimensions follow : TA Document 1999042/1.0, January 13,2000[1] Theoretical sharp corner; chamfer profile tolerance exclude radii.[2] Chamfers and ESD features are excluded from profile tolerance.[3] Contact Sharp is of the option of the manufacturer.[4] Theoretical intersection of R0.3 with main surface.
Spec No. : U2D017001-00 U2D0-ZZ-00011.5
- All dimensions follow : Universal Series Bus Specification 2.0 (April 27,2000)
Figure 6-9. USB Series A Plug Interface Drawing
www.ude-corp.com2017/6/21
Standard USB 2.0 Plug Specification
- 4 -
Spec No. : U2D017001-00 U2D0-ZZ-00012. REQUIREMENTS
2.1 Design and Construction
2.2 Material
2.2.1 Terminal Parts (Underplating : 30μ"min. Nickel overall)
2.2.1.1 USB Terminal : PH. Bronze, Thickness=0.25mm
Finish : Contact Area : Gold Flash
Solder Tail : 100μ" min. Matte Tin
2.2.1.2 1394 Terminal : Brass, Thickness=0.25mm
Finish : Contact Area : Gold Flash
Solder Tail : 100μ" min. Matte Tin
2.2.2 Plastic Parts <UL94V-0>
2.2.2.1 Housing : PBT, Black
2.2.2.2 Spacer : PBT, Black
2.2.3 Shield Parts
2.2.3.1 Front Shield : Stainless steel, Thickness=0.25mm, unplating
2.2.3.2 Back Shield : Stainless steel, Thickness=0.20mm, pre-soldering
2.2.3.3 USB Shield : Stainless steel, Thickness=0.25mm, unplating
2.2.3.4 1394 Shield : Stainless steel, Thickness=0.20mm, unplating
www.ude-corp.com- 5 -2017/6/21
Product shall be of design, construction and physical dimensions specifiedon applicable.
Spec No. : U2D017001-00 U2D0-ZZ-00012.3 Operating and Storage Temperature
2.4
Contact Current Rating : 1.5A MAX
Contact Resistance : 30 ohm MAX
2.5
Contact Current Rating : 1.5A MAX
Contact Resistance : 30 ohm MAX
500Vac/minute
2.6 Performance and Test Description
2.7 Packaging and Packing
www.ude-corp.com
10N min
Durability : 1500 cycles
All parts shall be packaged and packed to protect against physicaldamage、corrosion and deterioration during shipment and storage.
Dielectric Withstanding Voltage :
35N max
Product is designed to meet electrical, mechanical and environmentalperformance requirements specified in below table. All tests are performedat ambient environmental conditions per MIL-STD-1344A and EIA-364unless otherwise specified.
- 6 -
Durability : 1000 cycles
Insertion force :
Removal force :
1000MΩ min.
USB 2.0 specifications
Insulation Resistance :
Insulation Resistance :100MΩ min.
Dielectric Withstanding Voltage :
Insertion force : /
1394 4Pin specifications
Operating Temperature : -40°C to +85°C
500Vdc±50Vdc
9.8N min , 39.2N max.
2017/6/21
Removal force :
Storage Temperature : -40°C to +85°C
Spec No. : U2D017001-00 U2D0-ZZ-00013. WAVE SOLDERING TEMPERATURE PROFILE
www.ude-corp.com2017/6/21 - 7 -
Spec No. : U2D017001-00 U2D0-ZZ-00014. Revision History
www.ude-corp.com
Initial Release . Jeff2017/6/21
Issue Date
A
Revision Comments Operator
2017/6/21 - 8 -