TMS 9000 Rotary How to order: Torque Measurement System

292

TORQUE

Questions? Contact us at either 1-800-848-6564, +1 614-850-5000, or our Web site for customized options: (http://sensing.honeywell.com/TMsensor-help).

Specifications subject to change.

TMS9000RotaryTorqueMeasurementSystem

•Digitaltelemetry•Standardorcustomsetup•Singleormulti-channel•Greatercontrol•Moreversatile•Rangesto200000ft-lb

How to order: (Quick-ship range/option combinations available. See Web site.)

Consult factory for ordering information.

Order codesConsult factory for order information.

Specifications

PerformanceTorque range Varies on application; consult factory (up to 200000 lb-ft)Nominal system accuracy ±0.05 % full scaleFrequency output Analog 10K Hz ± 5K Hz; 60K Hz ±20K Hz Digital RS-232Resolution 0.01 % to 0.001 % full scaleMeasurement frequency range 0 kHz to 3 kHzDigital filter 0.1 kHz to 1 kHzMaximum sampling rate 17.656 kHz sensor, 8834 Hz analog output (voltage only)

EnvironmentalTemperature, operating -40 °C to 85 °C [-40 °F to 185 °F]Temperature, compensated -10 °C to 50 °C [14 °F to 122 °F]Temperature effect, zero ±0.003 % full scale/°FTemperature effect, span ±0.003 % full scale/°F

ElectricalPower supply (standard, non-isolated) 12 Vdc (nom)Analog output voltage ± 10 Vdc, 2K ohm min.Analog output current 4 mA to 20 mALoad impedance 500 ohm max. (for current loop)

The TMS 9000 torque measurement system represents an advanced generation of rotary transformer sensors designed to operate entirely in the digital domain for enhanced accuracy and versatility. The TMS 9000 series physically integrates rotor electronics and telemetry into one element, with all set-up and output controlled through computer software. This digital wireless telemetry system supplies power to the rotating sensor, supports two-way communications and provides wide testing capabilities. More than a stand-alone sensor, the specially designed TMS 9000 is a complete torque measurement system, with standard analog, frequency and digital outputs. Fully software driven, the durable TMS 9000 utilizes a custom 16-bit digital wireless telemetry system, which maximizes resolution and frequency response while also being able to provide excitation power across the wireless gap. System set-up can be changed “on-the-fly” without affecting calibration.

Potential applications include transportation and automotive, manufacturing and production, aero-space and military, medical, design and engineering, testing and quality.

Electrical features

• Rotor electronics module. This is embedded in the sensor and receives and conditions the input signal before transmitting it to the SPM.

• Signalprocessingmodule(SPM). This device integrates two microprocessors to share data processing and communications. It recovers the signal from the rotor, provides scaling and filtering, and offers a variety of outputs, compatible with various data acquisition systems.

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

293

TORQUE

Specifications subject to change. Questions? Contact us at either 1-800-848-6564, +1 614-850-5000, or our Web site for customized options: (http://sensing.honeywell.com/TMsensor-help).

Software features

The toolkit software at the heart of the TMS 9000 system is designed to offer flexibility and adaptability. The software puts the operator fully in control and can be tailored to the test conditions required at the time. Standard or custom set ups can be saved to parameter files and recalled at any time. Input scaling and output scaling is independent, providing a wider application advantage.

Toolkit features

• Full software set-up• No zero and span adjustments or dip switches• Scalable output “on the fly”• Up to nine-point linearization feature• User-selectable digital filter feature• Simple ASCII communications protocol

Additional features

• Custom designs available

Mechanical sensor features

• No hoop antenna• System error ±0.05 % full scale typ., ±0.1 % full scale max.• Enhanced torsional stiffness• Enhanced overload capability• Low rotating inertia• Variety of mating flange designs• Custom designs available

Dynamics of the TMS 9000

The rotor electronics module is encapsulated to enhance protection against vibration, G Force and chemicals.• The rotating antenna is comprised of an annular printed circuit

board, peripherally or centrally mounted on the rotor.• Four layer construction ensures enhanced strength with no

exposed tracks in the outer region.• IP65 caliper-style coupling module with die cast Aluminum cas-

ing. Provides power transmission and signal recovery with BNC connector for coaxial cable.

Signal processing module (SPM)

The SPM contains two separate microprocessors to share data processing and communications. Calibration is all digital, via RS-232 link, eliminating zero and span adjustments or dip switches. The durable unit has an external BNC connector for the RF coaxial cable, internal 2-part plug and socket connectors for output signals, digital communication and dc power. The SPM external housing also features a “SHUNT CAL” button and LEDs to indicate “Power ON”, “Rotor Active” and “SHUNT CAL Mode”. Because of these enhanced technolo-gies, the end result is a true advancement in telemetry-based torque systems.

Mechanical mating configurations

TMS 9000 Series torque sensors perform well under tough conditions. For years, sensor operators in varied applications have acknowledged the enhanced accuracy, durability, and quality built into each sensor. TMS 9000 Series sensors can be tailored to specific applications for ever greater versatility with capacities up to 200000 lb-ft.

Integral coupling -92005 Series

DIN drive shaft yokes - 9200 Series

Rotating circular keyed shaft - 92120 Series

Test communications Parameters/system setup

Systems quality test Systems zero/tare

SPM Card

Approved


Clamp-on Rotary Torque Transducer SystemModel 9300

DESCRIPTION

The Series 9300 Torsionometer is ideal for measuring torque on

machinery where little down time can be afforded. The quick in-

stallation of the clamp-on collars with the pre-calibrated bending

beam converts I/O shafts into instant torque transducers.

The 9300 Series are ideal for those applications involving repeti-

tive testing of identical systems. The clamp-on 9300 Series uses

a pre-calibrated bending beam which is clamped at each end

by a counterbalanced collar around a heavy-wall or solid shaft to

sense torque. Each installation uses one of a selection of bend-

ing beam lengths to generate the specific output to the on-board

RF transmitter. The strain gage output is then coupled to the

readout device or control loop via an RF telemetry package.

A variety of collars and bending beams are available to accom-

modate high torque ranges and shafts from 2.5 in to 15.4 in di-

ameter. Running speeds are from 2500 RPM down to zero RPM.

The built-in transmitter can be environmentally sealed for harsh

environments and high vibration.

FEATURES• 0.15%non-linearity

• Idealforshort-termtesting

• Convertsanyshaftintoatorquetransducer

• Varietyofcollarsandbendingbeamsforshaftdiameter

from 63,5 [2.5 in] to 391,16 [15.4 in]

• 2500RPMdowntozeroRPMrunningspeeds

• Suitableforharshenvironmentsandhighvibration


2Honeywell•SensingandControl

Model 9300

PERFORMANCE SPECIFICATIONS

Characteristic Measure

Torque range Variesonapplication;consultfactory

Linearity ±0.15%fullscale

Non-repeatability ±0.05%fullscale

Frequency response dc to 1000 Hz

Sensitivity (transmitter) 300 microstrain

Number of channels 1

Sampling rate 5 kHz

Receiver readout display type

3.5 digit 7 segment LED

ENVIRONMENTAL SPECIFICATIONS


Temperature, operating (transmitter)

-9°Cto75°C[16°Fto167°F]

Temperature, operating (receiver/IPS/PSU)

4°Cto60°C[40°Fto140°F]

Temperature, compensated (transmitter)

0°Cto75°C[32°Fto167°F]

Temperature, compensated (receiver)

0°Cto53°C[32°Fto127°F]

Temperature effects, zero (max.)

±0.01%fullscale

Temperature effects, span (max.)

±0.005%fullscale

Static G force (rotating components)

100 G

RPM limits (rotating components)

See graph - depends on shaft diameter

Vibration(rotatingcomponents)

10 G to 1 kHz

Collarweight Varieswithshaftdiameter

Electronics weight (not including cables)

Receiver and IPS 3,4 kg [7.5 lb]

ELECTRICAL SPECIFICATIONS


Induction power source 160kHz±6%

Cablelength(IPS to receiver)

4,6 m [15 ft]1

Max. cable length (IPS to receiver)

30,48 m [100 ft]

Power supply voltage (receiver)

120/240Vacuser-selectable

Power consumption (receiver)

200VAmax.

RF operating frequency Factory set, 16 MHz standard

RF modulation type PWM

Signal strength indicator (receiver)

LED bar graph

Analog output (receiver) ±10Vdc@1mAmax.

Output impedance (receiver)

< 1 Ohm

Electrical termination (receiver output)

BNCfemale

Mating connector (receiver output)

BNCmale

Analog output filter cap. (receiver)

Userselectable1000Hz;500Hz;200Hz;100Hz;1Hz

1.Consultfactoryforothercablelengths.

OPTION CODES

Range Code Many range/option combinations are available in our quick-ship and fast-track manufacture pro-grams. Please see http://sensing.honeywell.com/TMsensor-ship for updated listings.

Torque range Variesonapplication;consultfactory

Available frequencies

16 MHz

Environmental protection

62h. NEMA IPS

Receiver power supply

62v.dc(specify12Vdcor24Vdc)


Honeywell•SensingandControl3

Clamp-on Rotary Torque Transducer System

RPM LIMITS gRAPh2

MEChANICAL SPECIFICATIONS


Dimensions (collar cross section)

Varieswithshaftdiameter

Dimensions (receiver) (L x W x H)

292,1 mm x 218,44 mm x 88,9 mm [11.5 in x 8.6 in x 3.5 in]

Dimensions (IPS) (L x W x H)

152,4 mm x 101,6 mm x 63,5 mm [6 in x 4 in x 2.5 in]

Rotational clearance (collar)

63,5 mm [2.5 in] all around

Shaft diameter limits (collar)

63,5 mm to 391,16 mm [2.5 in to 15.4 in]

Collarmaterial Phenolic, steel

TYPICAL SYSTEM DIAgRAM

For reference only

MOUNTINg DIMENSIONS

Shaft diameter Sensor radius

Antenna diameter

Collar diameter

DS mm [in] (ID)

DS mm [in] (OD)

R mm [in]

DA mm [in]

DC mm [in]

63,5 [2.5]

87,37 [3.44]

60,96 [2.4]

177,8 [7.00]

149,35 [5.88]

87,37 [3.44]

112,77 [4.44]

73,66 [2.9]

203,2 [8.00]

174,75 [6.88]

112,77 [4.44]

138,17 [5.44]

86,36 [3.4]

228,6 [9.00]

200,15 [7.88]

138,17 [5.44]

163,57 [6.44]

99,06 [3.9]

254 [10.00]

225,55 [8.88]

163,57 [6.44]

188,97 [7.44]

111,76 [4.4]

279,4 [11.00]

250,95 [9.88]

188,97 [7.44]

214,37 [8.44]

124,46 [4.9]

304,8 [12.00]

276,35 [10.88]

214,37 [8.44]

239,77 [9.44]

137,16 [5.4]

330,2 [13.00]

301,75 [11.88]

239,77 [9.44]

265,17 [10.44]

149,86 [5.9]

355,6 [14.00]

327,15 [12.88]

265,17 [10.44]

290,57 [11.44]

162,56 [6.4]

381 [15.00]

352,55 [13.88]

290,57 [11.44]

315,97 [12.44]

175,26 [6.9]

406,4 [16.00]

377,92 [14.88]

315,97 [12.44]

341,37 [13.44]

187,96 [7.4]

431,8 [17.00]

403,35 [15.88]

341,37 [13.44]

366,77 [14.44]

200,66 [7.9]

457,2 [18.00]

428.75 [16.88]

366,77 [14.44]

392,17 [15.44]

213,36 [8.4]

482,6 [19.00]

454,15 [17.88]Electronics completion package: Part # 060-G834-03 includes Model 2145 ac receiver,

Model 2175A induction power supply, 15 feet coaxial cable, and operating manual.

2.ConsultfactoryforhigherRPMspeeds.


SensingandControl

AutomationandControlSolutions

Honeywell

1985 Douglas Drive North

GoldenValley,MN55422USA

+1-815-235-6847

www.honeywell.com/sensing

008803-1-EN IL50 GLO June 2008Copyright © 2008 Honeywell International Inc. All rights reserved.

Model 9300 Clamp-on Rotary Torque Transducer System

Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed tootherwisebyHoneywellinwriting;pleaserefertoyourorder acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall honeywell be liable for consequential, special, or indirect damages.

While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.

Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.

FormoreinformationaboutSensingandControlproducts,visitwww.honeywell.com/sensing or call [email protected]

WARNINgPERSONAL INJURY

•DONOTUSEtheseproductsassafetyoremergencystopdevicesorinanyotherapplicationwherefailureofthe product could result in personal injury.

Failure to comply with these instructions could result in death or serious injury.

WARNINgMISUSE OF DOCUMENTATION

•Theinformationpresentedinthiscatalogueisforreferenceonly.DONOTUSEthisdocumentasproductinstallationinformation.•Completeinstallation,operationandmaintenanceinformationisprovidedintheinstructionssuppliedwitheach product.



Low Capacity Torque SensorModel 1602

frequency excitation provides increased signal/noise immunity.

Capacity range from 50 in-oz to 1000 in-oz for small shaft mount-

ing configurations.

FEATURES• 50in-ozto1000in-ozcapacityrange

• 0.1%non-linearityandhysteresis

• Integralfootmount(standard)

• Speedsensor(optional)

• Highoverloadprotectionwithhighsignaloutput(sensitivity)

• Extendedspeedrange

• Minimalmaintenanceduetobearingsonlycontact

• Carrierfrequencyexcitationprovidesincreasedsignal/noise

immunity

DESCRIPTIONAlineoflowcapacityrotarytransformertorquesensorsoften

idealfortestinstallationsrunninglong-termdurabilitytesting.

Non-contact nature of the signal transfer virtually eliminates the

needformaintenance.Highoverloadprotectionwithhighsignal

output helps prevent potential damage to the sensor. Carrier



Model 1602



Torque range 50, 100, 200, 500, 1000 oz-in

Non-linearity ±0.1%ofratedoutput

Hysteresis ±0.1%ofratedoutput

Repeatability ±0.05%ofratedoutput

Output @ rated capacity 2mV/V(nominal)



Temperature, operating -29 °C to 93 °C [-20 °F to 200 °F]

Temperature, compensated 21 °C to 77 °C [70 °F to 170 °F]

Temperature effect, zero ±0.002%ofratedoutput/°F

Temperature effect, output ±0.002%ofreading/°F



Excitation(maximum) [email protected]

Insulationresistance > 5000 mOhm @ 50 Vdc

Bridge resistance 350ohm(nominal)

Numberofbridges 1

Zerobalance ±1.0%ofratedoutput

TYPICAL SYSTEM DIAGRAM

24368-1 Speed Sensor

Optional

10070-1 Optional Calibration Arm

Customer SuppliedChart Recorder

Alarm PanelData Acquisition

ComputerPLC

7541-111 (Single Channel Display)7541-112 (Dual Channel Display)7541-115 (For Torque and Optional Speed Display)

Display Units

Lebow Products MODEL 7541

MENU VIEW TEST TARE HOLDESC

RESETENTER

Model 1602

Mating Connectors & Cables

064-LW13621 Mating connector064-LW13656 Mating connector, speed pickup 064-LW25469 Mating connector, zero velocity speed pickup7200-28-XX* Mating connector & 6 conductor cable (unamplified unit with sense leads but not shunt cal)7200-106-XX* Mating connector & 6 conductor cable (for connection to instrument 7541)7204-00-XX* Speed sensor cable, pigtail leads at instrument7204-16-XX* Speed sensor cable to instrument 75417220-47-XX* Zero velocity speed sensor cable, pigtail leads at instrument7220-119-XX* Zero velocity speed sensor cable to instrument 7541

* XX represents length in feet 100ft maximum



Low Capacity Torque Sensor

MOUNTING DIMENSIONS

C cm [in]

L cm [in]

N cm [in]

P cm [in]

U cm [in]

K cm [in]

A cm [in]

B cm [in]

D cm [in]

E cm [in]

F cm [in]

H cm [in]

J cm [in]

16,50 [6.50]

5,71 [2.25]

2,50 [1.0]

8,89 [3.50]

0,95 [0.37]

1,90 [0.75]

0,86 [0.34]

10,16 [4.00]

4,44 [1.75]

4,44 [1.75]

2,50 [1.00]

0,50 [0.20]

6,03 [2.38]

MECHANICAL SPECIFICATIONS

Model Capacityoz-in

CapacityN-m

Max speedRPM

Protected for overloads to oz-in

Torsional stiffness lb-in/rad

Rotating inertia lb-in/sec2

Weight kg [lb]

1602-50* 50 0.35 20000 150 400 9.06 x 10-4 1,48 [3.25]

1602-100 100 0.70 20000 300 1000 9.06 x 10-4 1,48 [3.25]

1602-200 200 1.50 20000 600 2500 9.06 x 10-4 1,48 [3.25]

1602-500 500 3.50 20000 1500 5500 9.06 x 10-4 1,48 [3.25]

1602-1K 1000 7.00 20000 1500 8000 9.06 x 10-4 1,48 [3.25]

* Output on this capacity only 1 mV/V nominal

RECEP.MS-3102E-14S-5P

KEACH END

H 4 HOLE

U

FF

J

N N

L

C

P

A

D D

B

E

OPTIONALSPEED SENSOR

For reference only


SensingandControl


Honeywell



+1-815-235-6847



Model 1602 Low Capacity Torque Sensor

Warranty. Honeywellwarrantsgoodsofitsmanufactureasbeingfreeofdefectivematerialsandfaultyworkmanship.Honeywell’sstandardproductwarrantyappliesunlessagreedtootherwisebyHoneywellinwriting;pleaserefertoyourorderacknowledgementorconsultyourlocalsalesofficeforspecificwarrantydetails.IfwarrantedgoodsarereturnedtoHoneywellduringtheperiodofcoverage,Honeywellwillrepairorreplace,atitsoption,withoutchargethoseitemsitfindsdefective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.

Whileweprovideapplicationassistancepersonally,throughourliteratureandtheHoneywellwebsite,itisuptothecustomertodeterminethesuitabilityoftheproductintheapplication.

Specificationsmaychangewithoutnotice.Theinformationwesupplyisbelievedtobeaccurateandreliableasofthisprinting.However,weassumenoresponsibilityforitsuse.

FormoreinformationaboutSensingandControlproducts,visitwww.honeywell.com/sensingorcall+1-815-235-6847Emailinquiriestoinfo.sc@honeywell.com

WARNINGPERSONAL INJURY



WARNINGMISUSE OF DOCUMENTATION




Model 1604-1607

FEATURES• 50in-lbto100000in-lbcapacity


• Speedsensorand/orfootmount(optional)


• Minimalmaintenanceduetobearingsonlycontact


immunity

excitationprovidesincreasedsignal/noiseimmunity.Capacity

rangefrom50in-lbto100000in-lbforshaftmountingconfigura-

tions.

DESCRIPTIONAlineofrotarytransformertorquesensorsoftenidealfortest

installationsrunninglong-termdurabilitytesting.Non-contact

natureofthesignaltransfervirtuallyeliminatestheneedfor

maintenance.Highoverloadprotectionwithhighsignaloutput

helpspreventpotentialdamagetothesensor.Carrierfrequency

Standard Rotating Shaft Torque Sensor



Model 1604-1607



Torquerange 50lb-into100000lb-in




Output@ratedcapacity 2mV/V(nominal)



Temperature,operating -29°Cto93°C[-20°Fto200°F]

Temperature,compensated 21°Cto77°C[70°Fto170°F]

Temperatureeffect,zero ±0.002%ofratedoutput/°F

Temperatureeffect,output ±0.002%ofreading/°F



Excitation [email protected]

Insulationresistance >5000mOhm@50Vdc

Bridgeresistance 350ohm(nominal)

Numberofbridges 1



24368-2 Speed Sensor 22236 Zero Velocity Pickup

Optional

1604: 25413-11605: 25413-9

1606: 25413-171607: 25413-11

Optional Foot Mount

Optional Calibration Arm

14086-1 (for 500-2000 in-lbs)14086-2 (for 50-200 in-lbs)



ComputerPLC


Display Units



RESETENTER

Model 1604


064-LW13621 Mating connector064-LW13656 Mating connector, speed pickup 064-LW25469 Mating connector, zero velocity speed pickup7200-28-XX* Mating connector & 6 conductor cable (unamplified unit with sense leads but not shunt cal)7200-106-XX* Mating connector & 6 conductor cable (for connection to instrument 7541)7204-00-XX* Speed sensor cable, pigtail leads at instrument7204-16-XX* Speed sensor cable to instrument 75417220-47-XX* Zero velocity speed sensor cable, pigtail leads at instrument7220-119-XX* Zero velocity speed sensor cable to instrument 7541

* XX represents length in feet 100ft maximum** XX represents length in feet 20ft maximum



Standard Rotating Shaft Torque Sensor


Model Capacitylb-in

CapacityN-m

Max speedRPM

Protected for overloads to lb-in



Weight kg [lb]

1604-50 50 5 10000 150 5000 2.59x10-3 8,20[18]

1604-100 100 10 10000 300 13500 2.59x10-3 8,20[18]

1604-200 200 20 10000 600 33000 2.59x10-3 8,20[18]

1604-500 500 55 10000 1500 85000 2.59x10-3 8,20[18]

1604-1K 1000 115 10000 3000 150000 2.59x10-3 8,20[18]

1604-2K 2000 225 10000 3000 225000 2.59x10-3 8,20[18]

1605-2K 2000 225 10000 6000 700000 8.41x10-3 12,70[28]

1605-5K 5000 565 10000 15000 950000 8.41x10-3 12,70[28]

1605-10K 10000 1130 10000 20000 1000000 8.41x10-3 12,70[28]

1606-20K 20000 2250 6700 60000 4080000 3.62x10-2 18,20[40]

1606-30K 30000 3390 6700 60000 4080000 3.62x10-2 18,20[40]

1607-50K 50000 5650 6000 150000 11800000 0.15 34,10[75]

1607-100K 100000 11300 6000 150000 19950000 0.47 34,10[75]

MOUNTING DIMENSIONS

Model C cm [in]

L cm [in]

N cm [in]

P cm [in]

U cm [in]

K cm [in]

A cm [in]

B cm [in]

D cm [in]

E cm [in]

F cm [in]

H cm [in]

1604 25,40[10]

15,24[6]

5,32[2]

10,16[4]

2,54[1.00]*

0,64[0.25sq]*

12,07[4.75]

8,89[3.50]

5,40[2.13]

5,08[2]

3,49[1.38]

0,71[0.28]

1605 32,39[12.75]

18,42[7.25]

6,99[2.75]

11,99[4.75]

3,81[1.50]

0,95[0.38sq.]

16,51[6.25]

10,16[4]

6,35[2.50]

6,67[2.63]

3,81[1.50]

1,03[0.41]

1606 40,01[15.75]

20,96[8.25]

9,53[3.75]

13,97[5.50]

5,72[2.25]

1,27[0.50sq.]

18,42[7]

13,34[5.25]

7,62[3]

7,62[3]

5,08[2]

1,35[0.53]

1607 48,26[19]

22,23[8.75]

13,02[5.13]

16,51[6.50]

7,62[3.00]

1,91[0.75sq.]

24,59[8.50]

13,97[5.50]

8,89[3.50]

8,89[3.50]

5,08[2]

1,35[0.53]

*50,100,200lb-inunits:K=3/16insq.,U=3/4in


OPTIONALFOOT MOUNT

U DIA.+.0000 -.0005

N N

F F

B L C

P

H4 HOLES

E EA


1/4-28 UNF. THRUATTACH RESTRAINING STRAPWHEN NOT FOOT MOUNTED

K

+.000 -.010


OPTIONALFOOT MOUNT

U DIA.+.0000 -.0005

N N

F F

B L C

P

H4 HOLES

E EA


1/4-28 UNF. THRUATTACH RESTRAINING STRAPWHEN NOT FOOT MOUNTED

K

+.000 -.010

Forreferenceonly


SensingandControl


Honeywell

1985DouglasDriveNorth


+1-815-235-6847



Model 1604-1607 Standard Rotating Shaft Torque Sensor

Warranty. Honeywellwarrantsgoodsofitsmanufactureasbeingfreeofdefectivematerialsandfaultyworkmanship.Honeywell’sstandardproductwarrantyappliesunlessagreedtootherwisebyHoneywellinwriting;pleaserefertoyourorderacknowledgementorconsultyourlocalsalesofficeforspecificwarrantydetails.IfwarrantedgoodsarereturnedtoHoneywellduringtheperiodofcoverage,Honeywellwillrepairorreplace,atitsoption,withoutchargethoseitemsitfindsdefective.The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.











Model 1804-1807

DESCRIPTIONA line of enhanced accuracy rotary transformer torque sensors

often ideal for test installations running long-term durability test-

ing. Non-contact nature of the signal transfer virtually eliminates

the need for maintenance. High overload protection with high

signal output helps prevent potential damage to the sensor.

Carrier frequency excitation provides increased signal/noise im-

munity. Extended speed range allows shaft rotation up to 27000

RPM. Capacity range from 100 in-lb to 100000 in-lb for shaft

mounting configurations.

FEATURES• 100in-lbto100000in-lbcapacities


• Enhancedaccuracy


• Extendedspeedrange,upto27000RPM

• Minimalmaintenancedueto“bearingsonly”contact


immunity

Enhanced Accuracy Rotary Torque Sensor

Model 7927 shunt cal reference box included with each purchase of 1800 Series.



Model 1804-1807



Torque range 100,200,500,1K,2K,5K,10K,20K,50K,100Klb-in




Output @ rated capacity 2mV/V(nominal)



Temperature,operating -30 °C to 77 °C [-20 °F to 170 °F]

Temperature,compensated 21 °C to 77 °C [70 °F to 170 °F]

Temperatureeffect,zero ±0.001%/ofratedoutput°F

Temperatureeffect,output ±0.001%/ofreading°F



Excitation 3.28kHzoptimum@10VacRMS

Insulation resistance >5000mOhm@50Vdc

Number of bridges 1

Zero balance ±1.0%ofratedoutput



Optional

1804: 25413-81805: 25413-91806: 25413-171807: 25413-11

Optional Foot Mount



ComputerPLC


Display Units



RESETENTER

Model 1804-1807


064-LW13621 Mating connector064-LW13656 Mating connector, speed pickup 064-LW25469 Mating connector, zero velocity speed pickup7200-81-XX* Mating connector & 6 conductor cable (unamplified unit with sense leads but not shunt cal)7204-00-XX* Speed sensor cable, pigtail leads at instrument7204-16-XX* Speed sensor cable to instrument 75417220-47-XX* Zero velocity speed sensor cable, pigtail leads at instrument7220-119-XX* Zero velocity speed sensor cable to instrument 7541


RUN CAL

Model 7927-108 for connection to 7541

Optional Calibration Arm

14086-1 (for 500-2000 in-lbs)14086-2 (for 50-200 in-lbs)




MOUNTING DIMENSIONS

Model C cm [in]

L cm [in]

N cm [in]

P cm [in]

U cm [in]

K cm [in]

A cm [in]

B cm [in]

D cm [in]

E cm [in]

F cm [in]

H cm [in]

1804 25,40[10]

14,76[6]

5,32[2]

10,16[4]

2,54[1.00]*

0,64[0.25sq]*

12,07[4.75]

8,89[3.50]

5,40[2.13]

5,08[2]

3,49[1.38]

0,71[0.28]

1805 32,39[12.75]

18,42[7.25]

6,99[2.75]

11,99[4.75]

3,81[1.50]

0,95[0.38 sq.]

16,51[6.25]

10,16[4]

6,35[2.50]

6,67[2.63]

3,81[1.50]

1,03[0.41]

1806 40,01[15.75]

20,96[8.25]

9,53[3.75]

13,97[5.50]

5,72[2.25]

1,27[0.50sq.]

18,42[7]

13,34[5.25]

7,62[3]

7,62[3]

5,08[2]

1,35[0.53]

1807 48,26[19]

22,23[8.75]

13,02[5.125]

16,51[6.50]

7,62[3.00]

1,91[0.75sq.]

24,59[8.50]

13,97[5.50]

8,89[3.50]

8,89[3.50]

5,08[2]

1,35[0.53]

*100,200lb-inunits:K=3/16insq.,U=3/4in


Model Capacitylb-in

CapacityN-m

Max speedRPM*

Protected for overloads to Nm [lb-in]



Weight kg [lb]

1804-100 100 10 27000 30 [300] 13500 2.59x10-3 8,20[18]

1804-200 200 20 27000 60[600] 33000 2.59x10-3 8,20[18]

1804-500 500 55 27000 165[1500] 85000 2.59x10-3 8,20[18]

1804-1K 1000 115 27000 340 [3000] 150000 2.59x10-3 8,20[18]

1804-2K 2000 225 27000 340 [3000] 225000 2.59x10-3 8,20[18]

1805-2K 2000 225 22000 675[6000] 700000 8.41 x 10-3 13,20[29]

1805-5K 5000 565 22000 1695[15000] 950000 8.41 x 10-3 13,20[29]

1805-10K 10000 1130 22000 2260[20000] 1000000 8.41 x 10-3 13,20[29]

1806-20K 20000 2250 12000 3390 [30000] 3.27 x 106 3.84 x 10-2 [55.90]

1807-50K 50000 5650 10000 16950[150000] 11.71 x 106 0.14 [85.20]

1807-100K 100000 11300 10000 16950[150000] 18.86x106 0.15 [85.20]

Consult factor for higher speed ratings when used with air/oil mist bearings.

OPTIONAL SPEED SENSOR

1/4-20 x .50 DEEP TAPPED HOLE2 PLACED 180 APART ONOPPOSITE SIDES FORRESTRAINING STRAPWHEN NOT FOOT MOUNTED.

K

U DIA.+0000 -0005

NNC

LB

F F

MS-3102E-14S-5P

EA

H4 HOLES

D+000-010

P

OPTIONAL FOOT MOUNT

For reference only


Sensing and Control

Automation and Control Solutions

Honeywell



+1-815-235-6847



Model 1804-1807 Enhanced Accuracy Rotary Torque Sensor

Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywellduringtheperiodofcoverage,Honeywellwillrepairorreplace,atitsoption,withoutchargethoseitemsitfindsdefective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.

Whileweprovideapplicationassistancepersonally,throughourliteratureandtheHoneywellwebsite,itisuptothecustomertodetermine the suitability of the product in the application.

Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However,weassumenoresponsibilityforitsuse.

FormoreinformationaboutSensingandControlproducts,visitwww.honeywell.com/sensingorcall+1-815-235-6847Email inquiries to [email protected]








Model 1815

DESCRIPTIONA line of enhanced accuracy rotary transformer torque sensors

often ideal for test installations running long-term durability test-

ing. Non-contact nature of the signal transfer virtually eliminates

the need for maintenance. High overload protection with high

signal output helps prevent potential damage to the sensor.

Carrier frequency excitation provides increased signal/noise

immunity. Extended speed range allows shaft rotation up to

25000 RPM. Capacity range from 50 in-lb to 10000 in-lb for shaft

mounting configurations.



• Splinedrive/flangemount

• Extendedspeedrange,upto25000RPM

• Minimalmaintenancedueto“bearingsonly”contact

Safetyconsiderations:ItwouldbeunsafetooperateHoneywelltorquesensors and load cells beyond static overload or ultimate extraneous loadlimitsasdefinedintheglossaryoftermsor,whenapplicable,higherthanmaximumspeed.Whenindoubt,consultfactory.Honeywellisnotresponsible for any property damage or personal injury which may result because of the misapplication of the transducer.

Model 7927 shunt cal reference box included with each purchase of 1800Series.

Flange housing mount with pads to match Army-Navy mountings stan-dard.Splinedrive.




Model 1815



Torque range 50,100,200,500,1K,2K,5K,10Klb-in




Output @ rated capacity 2 mV/V (nominal)



Temperature,operating -29 °C to 93 °C [-20 °F to 200 °F]

Temperature,compensated 21 °C to 77 °C [70 °F to 170 °F]

Temperatureeffect,zero ±0.002%/ofratedoutput°F

Temperatureeffect,output ±0.002%/ofreading°F



Excitation 3.28kHzoptimum@10VacRMS

Insulationresistance > 5000 mOhm @ 50 Vdc

Bridge resistance 350 ohm (nominal)

Number of bridges 1





ComputerPLC


Display Units



RESETENTER

Model 1815


064-LW13621 Mating connector064-LW13656 Mating connector, speed pickup 064-LW25469 Mating connector, zero velocity speed pickup7200-81-XX* Mating connector & 6 conductor cable (unamplified unit with sense leads but not shunt cal)7204-00-XX* Speed sensor cable, pigtail leads at instrument7204-16-XX* Speed sensor cable to instrument 75417220-47-XX* Zero velocity speed sensor cable, pigtail leads at instrument7220-119-XX* Zero velocity speed sensor cable to instrument 7541


RUN CAL


Optional

Model 7927-108 for connection to 7541




MOUNTING DIMENSIONS

Model A cm [in]

B cm [in]

C cm [in]

D cm [in]

E cm [in]

F cm [in]

G cm [in]

H cm [in]

J cm [in]

K cm [in]

L cm [in]

N cm [in]

P cm [in]

1815A 23,55[9.27]

2,67[1.05]

1,60[0.63]

2,84[1.12]

20,96[8.25]

0,36[0.14]

10,47[4.12]

10,48[4.13]

2,62[1.03]

1,03[0.41]

12,70[5.00]

15,24[6.00]

3/8-24

1815K 25,25[9.94]

4,29[1.69]

1,60[0.63]

4,01[1.58]

20,96[8.25]

0,36[0.14]

10,47[4.12]

10,48[4.13]

2,62[1.03]

1,03[0.41]

12,70[5.00]

15,24[6.00]

3/8-24


Model Capacity lb-in Capacity N-m Max speed RPM Protected for overloads to Nm [lb-in]

1815A-50 50 5 25000 15 [150]

1815A-100 100 10 25000 30 [300]

1815A-200 200 20 25000 60[600]

1815A-500 500 55 25000 165[1500]

1815A-1K 1000 115 25000 165[1500]

1815K-50 50 5 15000 15 [150]

1815K-100 100 10 15000 30 [300]

1815K-200 200 20 15000 60[600]

1815K-500 500 55 15000 165[1500]

1815K-1K 1000 115 15000 330 [3000]

1815K-2K 2000 225 15000 675[6000]

1815K-5K 5000 565 15000 1695[15000]

1815K-10K 10000 1130 15000 1695[15000]

INTERNAL AND ExTERNAL SPLINE DATA

Model Pressure angle Pitch dia. cm [in] Pitch Number of teeth

1815A 30° 2,03[0.80] 20/40 16

1815K 30° 3,05[1.20] 20/40 24

GN

FLANGE & SHAFT PER AND 10262

MS-3102E-L4S-5P

C


H

D

P

FLANGE & SHAFT PER AND 20002

EA

J FB

K6 HOLES

For reference only


SensingandControl


Honeywell



+1-815-235-6847



Model 1815 Enhanced Accuracy Rotary Torque Sensor

Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specificwarrantydetails.IfwarrantedgoodsarereturnedtoHoneywellduringtheperiodofcoverage,Honeywellwillrepairorreplace,atitsoption,withoutchargethoseitemsitfindsdefective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.


Specificationsmaychangewithoutnotice.Theinformationwesupply is believed to be accurate and reliable as of this printing. However,weassumenoresponsibilityforitsuse.









Non-Contact/Amplified Output Torque Transducer

Model 1700 Series

DESCRIPTIONThese transducers are suitable for laboratory applications as

well as industrial evironments because of their compact size

and multiple mounting options. The contactless transmission

of supply voltage and measuring signal enables continuous

operation with low maintenance.

FEATURES• 0.02Nmto1500Nmcapacityrange

• 0.25%accuracy

• Built-ininstrumentationamplifier(±10Voutput)(standard)

• Speedsensororangleencoderoption

• Contactless

• Compactsize

• Wideapplicationrange



Model 1700 Series



Torque range 0.02,0.05,0.1,0.2,0.5,1,2,5,10,20,50,100,200,300,500,1000,1500Nm



Temperature,operating 0°Cto60°C[32°Fto140°F]


Temperatureeffect,zero 0.02%/°K

Temperatureeffect,span 0.01%/°K



Supplyvoltage 12Vdc±10%

Currentconsumption lessthan200mA

Rise time1700-17031706

2ms1ms(1Hz)

Limitfrequency(3dB) 200Hz(nonefor1706)

Voltageoutput 0Vto±10V

Internal resistance 100ohm

Ripple <100mVpp

Overall accuracy <0.25%



Mechanical overload 200%ofratedoutput

SPEED SENSINg (RPM) (S) OPTION


Speedmax. 10000RPM

Output Open collector

Internalpull-up 100kOhm(5Vlevel)

Externalpull-up 24Vmax.

Imax. 20mA

Pulses/rev. 60

ANgLE (E) OPTION


Speedmax. 3000RPM

Pulses/rev. 360

Resolution 1°

Phaseshift Quadrature

Model Range(Nm)

Spring constant C (Nm/rad)

Mass moment of inertia (g/cm2)

Maximum permissible axial load (N)

Maximum permissible radial load (N)

1701 0to0,1 80 1,84 16 16

1701 0to0,2 80 1,84 16 16

1701 0to0,5 100 1,85 20 20

1701 0to1 175 1,93 40 40

1701 0to2 248 2,11 77 77

1702 5 979 67,7 32 32

1702 10 2167 68,1 66 66

1702 20 4052 69,1 65 65

1703 50 17307 692,4 56 56

1703 100 30603 700,7 272 272

1703 200 55353 727,7 567 567

1703 300 68185 755,0 822 822

1706 500 265661 3977 749 749

1706 1000 396759 9586 1465 1465

1706 1500 460206 9828 2147 2147



Non-Contact/Amplified Output Torque Transducer

MOUNTINg DIMENSIONS1700 1701 1702 1703 1706

Model dimensions 0.02/0.05 Nm 0.1/0.2/0.5/1 Nm 2 Nm 5/10/20 Nm 50/100/200/300 Nm 500/1000/1500 NmL mm 70 89 95 145 170 270Bmm 32 28 28 42 56 88Hmm 46 48,5 48,5 58 73 104H1mm 14 14 14 21 28 44D1g6mm Ø3 Ø5 Ø6 Ø15 Ø26 Ø45D2g6mm Ø3 Ø8 Ø8 Ø15 Ø26 Ø45D3-0,1mm Ø15 Ø27 Ø27 Ø38 Ø54 Ø80D4H7mm - Ø2 Ø2.5 - - -LK±0,1mm * Ø32 Ø32 Ø46 Ø65 Ø98L1mm 51 62 62 79 72 84L2mm 7.5 10 14 30 45 85L3mm 7.5 11 14 30 45 85L4mm 55 66 66 83 78 90L5-0,1mm - 4 5 - - -A1mm 38 40 40 60 42 46A2mm 24 22 22 32 40 70M1 M2.5x5deep M3x5deep M3x5deep M3x6deep M4x8deep M6x12deepM2 M2.5x5deep M3x6deep M3x6deep M3x6deep M4x8deep M6x12deepM3 - - - - M8x15deep M10x20deepP(DIN6885) - - - 2xA5x5x25 2xA8x7x40 4xA14x9x80

* consult factory

TYPICAL SYSTEM DIAgRAM

B

H 1

H

P

L 2

A 2

L

L 1

A 1

M 1

L 3

D 2D 3 D 1

L 5

L 4

D 4

9 0 º

4 5 º

M 2

M 3

L K

Forreferenceonly



ComputerPLC

7559 (for Torque Display) 7560 (for RPM Display)

Display Units


023-LW185-027-LF Mating connector7220-124-XX* Mating connector & 6 conductor cable (unamplified unit with sense leads but not shunt cal)


Model 1700

DC-DC Transformer(Optional)560-044

External DC Power Supply(Required)400-050

2003.1 lb.L1 L2 L3 L4

UP DOWN

VALUE CLEAR CHAN TARE

ENTERSETUP EXIT


SensingandControl


Honeywell



+1-815-235-6847



Model 1700 Series Non-Contact/Amplified Output Torque Transducer





WARNINgPERSONAL INJURY



WARNINgMISUSE OF DOCUMENTATION




Low Capacity Torque SensorModel 1102

DESCRIPTIONA line of low capacity rotary slip ring torque sensors primarily

designed for fractional horsepower motor test applications. In-

strumental in monitoring start up, running, and stall torque levels

during development and qualification of these motors. Capac-

ity range from 50 in-oz to 1000 in-oz for small shaft mounting

configurations.

FEATURES• 50in-ozto1000in-ozcapacityrange


• Integralfootmount(standard)

• Lowercostforgeneral“in-line”applications

• Canbeusedwithalmostallexistingdcandacsignal

conditioning equipment



Model 1102







Output @ rated capacity ±2mV/V(nominal)




Temperature, compensated 21 °C to 77 °C [70 °F to 170 °F]





Excitation(maximum) 20VdcorVacRMS

Insulation resistance > 5000 mOhm @ 50 Vdc


Numberofbridges 1


Electrical termination PT02E-10-6P


HoneywellIn-Line Amplifier

Output InputSerial Number

Power Supply



ComputerPLC

(Used with unamplified units only)

UVUV-10UBPU3WU2W

DV-05DA-05DV10

In-Line Amplifiers

Amplifier Universal In-Line Amplifiers

DIN rail Mount In-Line Amplifiers

Output

+/-5 VDC+/-10 VDC0 +/-5 VDC4-20mA (3 wire)4-20mA (2 wire)

0 +/- 5 VDC (3 wire)4-20mA (3 wire)0 +/- 10 VDC (3 wire)

2003.1 lb.L1 L2 L3 L4

UP DOWN


ENTERSETUP EXIT

SC500 SC1000 SC2000 SC2001 SC3004 GM NK HH7541 7558 7561-PSD

Display Units

For long cable runs or electrically noisy environments an amplified sensor or locally mounted amplifier is often preferred



RESETENTER

Optional Speed Sensor24368-1

MODEL 1102

(

(

u


)

)

023-LW181-023-LF Mating connector023-LW180-034-LF Mating connector, standard speed pickup7205-76-XX* Mating connector & 6 conductor cable

(unamplified unit with sense leads but not shunt cal)7205-75-XX** Mating connector & 4 conductor cable

(unamplified unit without sense leads but not shunt cal)7205-83-XX* Mating connector & 6 conductor cable

for connection to instrument 75417205-82-XX** Mating connector & 4 conductor cable

for connection to instrument 75417204-00-XX* Speed sensor cable, pigtail leads at instrument7204-16-XX* Speed sensor cable to instrument 7541

* XX represents length in feet 100ft maximum** XX represents length in feet 20ft maxim m

10070-1 Optional Calibration Arm

OR

OR

OR



Low Capacity Torque Sensor


oz-in N-m Max speed RPM

Overload capacity (% of nominal capacity)



Weight(lb)

50 0.35 20000 150 665 1.75x10-3 2

100 0.70 20000 150 1070 1.75x10-3 2

200 1.50 20000 150 1790 1.76x10-3 2

500 3.50 20000 150 3480 1.77x10-3 2

1000 7.00 20000 150 4850 1.78x10-3 2

MOUNTING DIMENSIONS

C cm [in]

L cm [in]

N cm [in]

P cm [in]

U cm [in]

K cm [in]

A cm [in]

B cm [in]

D cm [in]

E cm [in]

F cm [in]

H cm [in]

16,50 [6.50]

5,70 [2.25]

2,50 [1.00]

8,90 [3.50]

0,95 [0.37]

1,90 flat [0.75 flat]

0,86 [0.34]

10,50 [4.13]

4,44 [1.75]

4,44 [1.75]

2,50 [1.00]

0,50 [0.20]

MANUAL BRUSH LIFTER STANDARD

K U DIA.

D

A

E E

B

P

N L

F F

C

N

H4 MOUNTINGHOLES


PTO2E-10-6P

For reference only


SensingandControl


Honeywell



+1-815-235-6847



Model 1102 Low Capacity Torque Sensor

Warranty. Honeywell warrants goods of its manufacture as beingfreeofdefectivematerialsandfaultyworkmanship.Honeywell’s standard product warranty applies unless agreed tootherwisebyHoneywellinwriting;pleaserefertoyourorderacknowledgementorconsultyourlocalsalesofficeforspecific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.

While we provide application assistance personally, through our literatureandtheHoneywellwebsite,itisuptothecustomertodeterminethesuitabilityoftheproductintheapplication.


FormoreinformationaboutSensingandControlproducts,visitwww.honeywell.com/sensing or call +1-815-235-6847Email inquiries to [email protected]








Flange Drive Torque SensorModel 1228/1248

DESCRIPTIONA line of flange-drive, rotary slip ring torque sensors primarily de-

signed for a multitude of general test and measurement applica-

tions, such as drive line testing. Can be used to monitor start up,

running, and stall torque levels. Capacity range from 2000 in-lb

to 20000 in-lb.



• Shortdrivelength

• Highstiffnessforincreasedfrequencyresponse



Model 1228/1248



Torque range12281248

2000,5000,10000lb-in20000 lb-in




Output @ rated capacity ±2 mV/V (nominal)




Temperature, compensated 21°Cto77°C[70°Fto170°F]





Excitation (maximum) 20VdcorVacRMS



Number of bridges 1


Electrical termination MS3102E-14S-5P



Output Input

Serial Number

Power Supply



ComputerPLC


UVUV-10UBPU3WU2W

DV-05DA-05DV10

In-Line Amplifiers

AmplifierUniversal In-Line Amplifiers


Output



2003.1 lb.L1 L2 L3 L4

UP DOWN


ENTER EXIT

SC500 SC1000 SC2000SC2001 SC3004GM NK HH7541 7558 7561-PSD

Display Units




RESETENTER


064-LW13621 Mating connector064-LW13656 Mating connector, speed pickup 064-LW25469 Mating connector, zero velocity speed pickup7200-76-XX* Mating connector & 6 conductor cable (unamplified unit with sense leads but not shunt cal)7200-75-XX** Mating connector & 4 conductor cable (unamplified unit without sense leads but not shunt cal)7200-111-XX* Mating connector & 6 conductor cable (for connection to instrument 7541)7200-110-XX**Mating connector & 4 conductor cable (for connection to instrument 7541)7204-00-XX* Speed sensor cable, pigtail leads at instrument7204-16-XX* Speed sensor cable to instrument 75417220-47-XX* Zero velocity speed sensor cable, pigtail leads at instrument7220-119-XX* Zero velocity speed sensor cable to instrument 7541


Optional Speed SensorStandard Sensor

24368-4 (for Model 1248)

Zero Speed Sensor 25590-10 (for Model 1228) 25590-11 (for Model 1248)

MODEL 1228-1248

OR

OR

OR

24368-3 (for Model 1228)



Flange Drive Torque Sensor


Model lb-in N-m Max speedRPM

Overload capacity (% of nominal capacity)



Weight(lb)

1228 2000 225 5000 150 1035000 1.13x10-2 8

1228 5000 565 5000 150 2141000 1.14x10-2 8

1228 10000 1130 5000 150 2820000 1.19x10-2 8

1248 20000 2250 5000 150 4657000 4.02x10-2 17

MOUNTING DIMENSIONS

Model C cm [in] N cm [in] P cm [in] F cm [in] J cm [in] U cm [in] H cm [in] A cm [in]

1228 8,41[3.31] 0,95[0.38] 12,22[4.81] 7,94[3.13] [1/4-28] 8,89[3.50] 0,32[0.13] n/a

1248 10,95[4.31] 1,43[0.56] 14,30[5.63] 9,21[3.63] [3/8-24] 10,80[4.25] 0,79[0.31] n/a

+-

FIXED BRUSH CARRIERREMOVABLE

FOR CLEANING

MS-3102E-14S-5P

U DIA..001

BOTHENDS #10-24 UNF

THRUATTACHRESTRAININGSTRAP J

8 HOLES

F

H

P

NNC


ROTATING DRIVEFLANGE-BOTH ENDS

For reference only


SensingandControl


Honeywell



+1-815-235-6847



Model 1228/1248 Flange Drive Torque Sensor












Model 1254 and 1254E

DESCRIPTIONThe sensors are primarily used to measure the output torque of

stall and clutch type nutrunners in production fastening opera-

tions (not recommended for mechanical impact wrenches). Units

equipped with incremental encoders are available for applica-

tions where fastener’s angle of rotation as well as torque data

are required. These sensors are used to monitor operation of

systems using the following fastening strategies: turn of the nut ,

tension control and yield control.

FEATURES• 50in-lbto1000ft-lbcapacity


• Hex(in-lbsizes)andsquaredriveconfigurations

• Incrementalencoder(optional)

• Adaptableforportableusage

• Nospecialadaptertoolsrequired

• Repeatabletorquemeasurements

Socket Wrench Torque Sensor



Model 1254 and 1254E



Torque range 50,100,200lb-in;50,100,300,1000lb-ft




Output @ rated capacity ±2mV/V±0.25%fullscale



Temperature, operating -54°Cto93°C[-65°Fto200°F]1


Temperatureeffect,zero ±0.002%ofratedoutput/°F




Excitation(recommended) 10VdcorVacRMS

Insulationresistance >5000mOhm@50Vdc


Zero balance ±5%orbetterofratedoutput

1254E SPECIFICATIONS


Pulses per revolution 360

Output 2squarewavesignal90°phasedifference flat over operating speedrange

Output voltage 350ohm(nominal)

Power required High5V,Low0.5V(outputwilldrivetwostandardTTLloadsd)




ComputerPLC

7554-100 (Torque Only)7554-101 (RPM)

Display Units


(


)

023-LW181-108-LF Mating connector7200-121-XX* Mating connector & 6 conductor cable

(unamplified unit with sense leads but not shunt cal)7200-122-XX* Mating connector & 6 conductor cable

for connection to instrument 7554




RESETENTER

Model 1254/1254E



Series Socket Wrench Torque Sensor

MOUNTING DIMENSIONS

Model without encoder

Model withencoder

Capacity Capacity N m

Overload capacity

Drive Speed RPM A in B in C in D in E in

1254-301 1254E-301 50lb-in 5.6 150% 1/4inhex. 5000 3.25 2.53 1.94 1.62 0.46

1254-301 1254E-301 100lb-in 11.30 150% 1/4inhex. 5000 3.25 2.53 1.94 1.62 0.46

1254-303 1254E-303 200lb-in 22.60 150% 3/8insq. 2500 3.38 2.53 2.06 1.62 0.56

1254-305 1254E-305 50lb-ft 67.80 150% 1/2insq. 2500 3.54 2.53 2.06 1.62 0.68

1254-305 1254E-305 100lb-ft 135.60 150% 1/2insq. 2500 3.54 2.53 2.06 1.62 0.68

1254-307 1254E-307 300lb-ft 406.70 150% 3/4insq. 2000 4.45 3.07 3.37 2.38 0.91

1254-309 1254E-309 1000lb-ft 1356 125% 1insq. 1000 5.36 3.42 3.77 2.88 1.22

B

A

E

C

D

Forreferenceonly

Receptacle:PT02H-12-10PMatingconnector:PT06E-12-10S


SensingandControl


Honeywell



+1-815-235-6847



Model 1254 and 1254E Series Socket Wrench Torque Sensor

Warranty. Honeywellwarrantsgoodsofitsmanufactureasbeing free of defective materials and faulty workmanship. Honeywell’sstandardproductwarrantyappliesunlessagreedtootherwisebyHoneywellinwriting;pleaserefertoyourorderacknowledgementorconsultyourlocalsalesofficeforspecificwarrantydetails.IfwarrantedgoodsarereturnedtoHoneywellduringtheperiodofcoverage,Honeywellwillrepairorreplace,atitsoption,withoutchargethoseitemsitfindsdefective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.

While we provide application assistance personally, through our literatureandtheHoneywellwebsite,itisuptothecustomertodetermine the suitability of the product in the application.










Wheel Torque SensorModel 1246

DESCRIPTIONThe automobile wheel torque sensor is designed to be bolted to

the brake drum or spindle of a car or truck in place of the regular

wheel. The wheel is then bolted to the torque sensor. This moves

the wheel outward approximately 1-1⁄2 inches from its original

location. A slip ring or rotary transformer assembly is provided

to connect the torque sensor to an instrument in the vehicle.

The sensor is normally furnished with one adapter plate for one

given stud pattern. Also, on some models, a dc tachometer or

60-tooth gear and magnetic pickup generator can be supplied

which provides a signal proportional to wheel speed. Standard

capacity ranges of 20K, 30K, and 36K in-lb, others available

upon request.

FEATURES• 20Kin-lb,30Kin-lb,and36Kin-lbcapacities


• Speedsensor(optional)

• “At-the-source”torquemeasurement

• Largeselectionofcapacitiesavailable

• Specialcustomconfigurationsavailable



Model 1246 Wheel Torque Sensor



Torque range 1246 20K, 30K, 36K lb-in




Output @ rated capacity ±1.5mV/V(nominal)



Temperature, operating -54°Cto93°C[-65°Fto200°F]









Number of bridges 1



2003.1 lb.L1L2L3L4

UP DOWN


ENTERSETUP EXIT


Output Input

Serial Number

Power supply Customer suppliedChart recorderAlarm panel

Data acquisitionComputer

PLC

For long cable runs or electrically noisy environments an amplifier close to sensor is often preferred

In-line amplifiers(Used with unamplified units only)

UVUV-10UBPU3W

DV-05DA-05DV10

Amplifier Universal in-line amplifiers

DIN rail mount in-line amplifiers

Output

± 5 Vdc± 10 Vdc0 ± 5 Vdc4 mA to 20 mA (3 wire)

0 ± 5 Vdc (3 wire)4 mA to 20 mA (3 wire)0 ± 10 Vdc (3 wire)

023-LW181-023-LF Mating connector023-LW180-034-LF Mating connector, standard speed pickup023-LW180-033 Mating connector, zero velocity speed pickup7205-76-XX* Mating connector & 6 conductor cable (unamplified unit with sense leads but not shunt cal)7205-75-XX** Mating connector & 4 conductor cable (unamplified unit without sense leads but not shunt cal)7205-83-XX* Mating connector & 6 conductor cable for connection to instrument 75417205-82-XX** Mating connector & 4 conductor cable for connection to instrument 75417204-00-XX* Speed sensor cable, pigtail leads at instrument7204-16-XX* Speed sensor cable to instrument 75417220-47-XX* Zero velocity speed sensor cable, pigtail leads at instrument7220-119-XX* Zero velocity speed sensor cable to instrument 7541

* XX represents length in feet 100 ft maximum** XX represents length in feet 20 ft maximim

Display units

7541 SC500 7558 7541-105 SC1000 GM(For optional SC2001 NKspeed display) SC3004 HH 7561-PSD



RESETENTER

OR

OR

Mating connectors & cables

Model1246

Optional 24368-2 Speed sensor22236 Zero velocity pickup


C/L OF TIREWITH TRANSDUCERINSTALLED

C/L OF TIREWITHOUT TRANSDUCERINSTALLED

CORRECTING FOR TIRE CENTER LINE OFFSETBY USING SPECIALLY DESIGNED WHEEL RIMS

BRAKEDRUM

TORQUESENSOR

WHEELADAPTER

STANDARD WHEELAND TIRE ASSEMBLY

SLIP RINGASSEMBLY

LUG NUTS

EXTERNALLY THREADED FOR LUG NUTSINTERNALLY THREADEDFOR SLIP RING ASSYHOLD DOWN BOLTS

LUGNUTS

Forreferenceonly


SensingandControl


Honeywell



+1-815-235-6847



Model 1246 Wheel Torque Sensor

Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your orderacknowledgementorconsultyourlocalsalesofficeforspecificwarrantydetails.IfwarrantedgoodsarereturnedtoHoneywell during the period of coverage, Honeywell will repair orreplace,atitsoption,withoutchargethoseitemsitfindsdefective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.


Specificationsmaychangewithoutnotice.Theinformationwesupply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.









Steering Effort Torque SensorModel 1369

DESCRIPTIONUsed in automotive or marine applications to measure torsion

on a steering arm or steering wheel. The steering effort torque

sensor is designed to be bolted to the steering column of a car,

truck, bus, boat, or material handling equipment in place of the

regular wheel. Position/angle encoding provided via resistive

network. Standard capacity ranges of 50 ft-lb, 100 ft-lb, and 200

ft-lb, others available upon request.

FEATURES• 50ft-lb,100ft-lb,and200ft-lbcapacities

• < 0.50 % non-linearity and hysteresis

• Directtosteeringcolumnattachment

• Truesteeringtorque-feedbackforautomobiles,trucks,

buses, and material handling equipment

• Torquetopositioncapability



Model 1369 Steering Effort Torque Sensor



Torque range 50, 100, 200 lb-ft

Non-linearity <0.50 % of rated output

Hysteresis <0.50 % of rated output

Repeatability ±0.35 % of rated output

Output @ rated capacity ±2 mV/V (nominal)









Excitation (maximum) 20 Vdc or Vac RMS



Number of bridges 1

Zero balance ±1.0 % of rated output


1/4-20 UNC-28 THD.1/2 DEEP 8 HOLES EQUALLY SPACEDON 4.375 DIA. B.C.

STEERINGCOLOMN

1/4- 20 UNC-28 THD.-1/2 DEEP4 HOLES EQUALLY SPACEDFOR RESTRAINING

M

3.25 APPROX.

RECEPT. BENDIX #B PIQZE-12-8PMATING CONN. FURNISHED

.75

.25

4.5 Ø 5 Ø

1.1241.125 Ø

1.0231.024 Ø

1.375

.125 3.5

SAE-10 SPLINE FITTING(10A PERMANENT FIT)

45ºZ

.174

.176

Model Capacity lb-ft

Capacity Nm

Protected for overloads to lb-ft

Protected for overloads to Nm

1369-50 50 68 75 102

1369-100 100 136 150 204

1369-200 200 272 300 408



Power Supply



ComputerPLC

MODEL 1369


UVUV-10UBPU3WU2W

DV-05DA-05DV10

In-Line Amplifiers



Output



2003.1 lb.L1 L2 L3 L4

UP DOWN


ENTERSETUP EXIT


Display Units

023-LW181-037-LF Mating Connector





RPM 100

Overload 150 % of rated output

MOUNTING DIMENSIONS

Forreferenceonly


SensingandControl


Honeywell


Golden Valley, MN 55422 USA

+1-815-235-6847



Model 1369 Steering Effort Torque Sensor

Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall honeywell be liable for consequential, special, or indirect damages.











Sprocket/Pulley Torque SensorModel 1388-102

DESCRIPTIONOriginally designed for a precision feedback control loop on

textile machinery, the Model 1388 Sprocket/Pulley Torque Sensor

is an accurate method to measure processing torques. Coupled

to any belt or chain driven stub shaft and monitored by a closed

electrical circuit, machinery speeds and material feed rates can

be precisely controlled. Used in an automation application to

increase productivity and decrease power consumption. Rotary

transformer with encoder option available.

FEATURES• 500in-lband1000in-lbcapacities(standard)


• Reducedsensitivitytobelt/chaintensionloadsontorque

readings not to exceed maximum overhung moment

• Eliminationoftorqueerrorduetobearinglossesin

jack-shaftassembly

• Measurementsoftorque“atthesource”

• Rotarytransformerwithencoderoptionavailable



Model 1388-102



Torque range 500,1000lb-in




Output @ rated capacity 2.0mV/V(nominal)





Temperature effect, zero 0.004%ofratedoutput/°F

Temperature effect, output 0.004%ofreading/°F






Zero balance <1.0%ofratedoutput

Electricaltermination PT02H-10-6P




Power Supply



ComputerPLC

MODEL 1388


UVUV-10UBPU3WU2W

DV-05DA-05DV10

In-Line Amplifiers



Output



2003.1 lb.L1 L2 L3 L4

UP DOWN


ENTERSETUP EXIT


023-LW181-023-LF Mating Connector7205-76-XX* Mating connector & 6 conductor cable (unamplified unit with sense leads but not shunt cal)7205-75-XX** Mating connector & 4 conductor cable (unamplified unit without sense leads but not shunt cal)7205-83-XX* Mating connector & 6 conductor cable (for connection to instrument 7541)7205-82-XX** Mating connector & 4 conductor cable (for connection to instrument 7541)




Display Units



RPM(max.) 5000



Sprocket/Pulley Torque Sensor

MOUNTING DIMENSIONS

A cm [in] B cm [in] C cm [in] D cm [in] E cm [in] F cm [in] G cm [in] h cm [in] I cm [in]

14,67[5.78] 13,170/13,172[5.185/5.186]

5,08[2] 13,02[5.13] 4,45[1.75] 2,858/2,863[1.125/1.127]

2,54[1.50] 9,53[3.75] 0,64[0.25]

A

SPROCKET 5.74 MIN. P.D.CUSTOMER FURNISHEDCUSTOMER TO MOUNT

TIGHTEN TO 17 FT.LBS. MAX.AT FINAL CUSTOMERASSEMBLY

5/16-24UNF. TAPPED

HOLES FORSET SCREWS

5/16-24 THD. G LONGBOLD ON A H DIA.3 PLACES

C

B

F

DE

5/16-24 UNF. THRUHOLES FOR MOUNTINGCUSTOMER SPROCKETOR PULLEY

#6-40 UNF. BOLTSON A 5.2.40 DIA. B.C.

I MODEL 6118-112SLIP RINGASSEMBLY

RECEP.PT02H-10-6P

Forreferenceonly


Sensing and Control


Honeywell



+1-815-235-6847



Model 1388-102 Sprocket/Pulley Torque Sensor

Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall honeywell be liable for consequential, special, or indirect damages.











Model QSFK-9

FEATURES• 100in-lbto24000in-lb


• Widedynamicrange

• Highfrequencyresponse

• Stainlesssteel

DESCRIPTIONModelQSFK-9shaftreactiontorquetransducerisdesignedfor

installationbetweentestpiecessuchasmotors,switches,axles

orshaftsandtheirmountingplate.Thesemodelsoperateand

arecalibratedinbothdirections.Stainlesssteelconstructionen-

hancesdurabilityinharsh,industrialenvironments.Thesemod-

elshavenomovingpartsandutilizefourbondedstraingages

onaspecialmachinedportionofthetransducertoachievea

maximumnon-linearityof0.1%overawidedynamicrange.

Typicalapplicationsincludetirebraking,motordynamometers,

friction-skidtesting,andtwistmeasurement.

Shaft Reaction Torque Transducer



Model QSFK-9



Range 100in-lbto24000in-lb

Systemaccuracy ±0.1%fullscale


Hysteresis ±0.1%fullscale


Output 2mV/Vnominal

Resolution Infinite





Temperatureeffect,zero 0.005%fullscale/°F

Temperatureeffect,span 0.005%reading/°F



Straingagetype Bondedfoil

Excitation 10Vdc

Bridgeresistance 350ohm

Electricaltermination MS3102A-14S-6Porequivalent

Matingconnector MS3106A-14S-6Sorequivalent(notincluded)

RANGE CODES

Range Code Available rangesTJ 100in-lb

TL 300in-lb

TN 600in-lb

TP 1200in-lb

TR 3000in-lb

TT 6000in-lb

TV 12000in-lb

TW 24000in-lb

OPTION CODES


Torque range100,300,600,1200,3000,6000,12000,24000in-lb

Temperature compensation

1a.16°Cto71°C[60°Fto160°F]1b.-1°Cto54°C[30°Fto130°F]1c.-18°Cto85°C[0°Fto185°F]1d.-29°Cto54°C[-20°Fto130°F]1e.-29°Cto93°C[-20°Fto200°F]1f.21°Cto121°C[70°Fto250°F]

Internal amplifiers

2u.Unamplified,mV/Voutput

Electrical termination

6a.BendixPTIH-10-6P-6-pin(max.121°C[250°F])

6b.MSconnectorMS3102E-14S-6P(mateswithMS3106E-14S-6S,max160°F)

6e.Integralcable:Teflon6f.Integralcable:PVC6g.Integralcable:Neoprene6h.Integralcable:Silicone

Interfaces53e.Signaturecalibration53t.T.E.D.S.IEEE1451.4module



Shaft Type Reaction Torque Transducer

MOUNTING DIMENSIONS

Forreferenceonly

Range (in-lb)

ØD1 mm [in]

ØD2 mm [in]

K key size

A mm [in]

B mm [in]

L mm [in]

100 19.05mm[0.75in]

57,15mm[2.25in]

3/16 69,85mm[2.75in]

57,15mm[2.25in]

203,2mm[8.00in]

600,1200 25,4mm[1.00in]

57,15mm[2.25in]

1/4 69,85mm[2.75in]

57,15mm[2.25in]

203,2mm[8.00in]

3000,6000,12000 38,1mm[1.50in]

88,9mm[3.50in]

3/8 95,25mm[3.75in]

76,2mm[3.00in]

279,4mm[11.00in]

24000 69,85mm[2.75in]

101,6mm[4.00in]

5/8 129,54mm[5.10in]

101,6mm[4.00in]

330,2mm[13.00in]



Staticoverloadcapacity 50%overcapacity

Casematerial Stainlesssteel



SensingandControl


Honeywell



+1-815-235-6847



Model QSFK-9 Shaft Type Reaction Torque Transducer












Shaft Reaction Torque SensorModel 2120

DESCRIPTIONModel 2120 shaft reaction torque sensor is designed for instal-

lation between test pieces such as motors, switches, axles, or

shafts and their mounting plate. These models operate and are

calibrated in both directions. Nickel-plated alloy steel enhances

durability in harsh, industrial environments. These models have

no moving parts and utilize four bonded strain gages on a spe-

cial machined portion of the transducer to achieve a maximum

non-linearity of 0.1% over a wide dynamic range. Typical ap-

plications include tire braking, motor dynamometers, friction-skid

testing, and twist measurement. 50 in-oz to 1000 in-oz capaci-

ties.

FEATURES• 50in-ozto1000in-ozcapacities


• Nomaintenanceofsliprings,bearings,orbrushes

• Low-endsensitivity

• Reactionmeasurementdesignedtoeliminatespeed

limitations



Model 2120




Non-linearity ±0.1 % of rated output

Hysteresis ±0.1 % of rated output







Temperature effect, zero 0.002%ofratedoutput/°F

Temperature effect, output 0.002%ofreading/°F






Number of bridges 1




Output Input

Serial Number

Power Supply



ComputerPLC

MODEL 2120

Optional Calibration Arm10070-1


UVUV-10UBPU3WU2W

DV-05DA-05DV10

In-Line Amplifiers



Output



2003.1 lb.L1 L2 L3 L4

UP DOWN


ENTERSETUP EXIT


Display Units

7205-76-XX* Mating connector & 6 conductor cable (unamplified unit with sense leads but not shunt cal)7205-75-XX** Mating connector & 4 conductor cable (unamplified unit without sense leads but not shunt cal)7205-83-XX* Mating connector & 6 conductor cable (for connection to instrument 7541)7205-82-XX** Mating connector & 4 conductor cable (for connection to instrument 7541)




023-LW181-023 Mating connector



Shaft Reaction Torque Sensor


Model Capacity Nm [oz-in]

Overload Nm [oz-in]

Torsional stiffness Nm/rad[lb-in/rad]

Max. overhung moment WxS Nm [lb-in]

Max. shear W N [lb]

Max. thrust P N [lb]

2120-50 0.35[50] 1.06[150] 34[300] 0.35[3.10] 11.57[2.60] 53.40[12]

2120-100 0.70[100] 2.16[300] 101[890] 0.71[6.25] 16.01[3.60] 155[35]

2120-200 1.50[200] 4.32[600] 261[2310] 1.41[12.50] 22.24[5.00] 265[60]

2120-500 3.50[500] 7.00[1000] 289[2560] 3.53[31.25] 44.50[10] 535[120]

2120-1K 7.00[1000] 10.60[1500] 580[5130] 7.06[62.50] 71.20[16] 625[140]

MOUNTING DIMENSIONS

Model C cm [in] L cm [in] N cm [in] R cm [in] U cm [in] P cm [in] T cm [in]

2120 11,43[4.50] 4,76[1.88] 3,33[1.31] 1,91[0.75] 0,95[0.37] 5,56[2.19] 0,86[0.34]

T FLATBOTH ENDS

PTO2E-10-6P

U

NLC

R

P

Forreferenceonly


SensingandControl


Honeywell



+1-815-235-6847



Model 2120 Shaft Reaction Torque Sensor

Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.


Specificationsmaychangewithoutnotice.Theinformationwesupply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.









Shaft Reaction Torque SensorModel 2121-2126

DESCRIPTIONModel 2121-2126 shaft reaction torque sensor is designed for

installation between test pieces such as motors, switches, axles,

or shafts and their mounting plate. These models operate and

are calibrated in both directions. Nickel-plated alloy steel con-

struction enhances durability in harsh, industrial environments.

These models have no moving parts and utilize four bonded

strain gages on a special machined portion of the transducer to

achieve a maximum non-linearity of 0.1% over a wide dynamic

range. Typical applications include tire braking, motor dyna-

mometers, friction-skid testing, and twist measurement. 100 in-lb

to 500K in-lb capacities.

FEATURES• 100in-lbto500Kin-lbcapacities


• Nomaintenanceofsliprings,bearings,orbrushes

• Reducedfrictionerror

• Low-endsensitivity

• Reactionmeasurementseliminatespeedlimitations

Safety considerations: It would be unsafe to operate Honeywell torque sensors and load cells beyond static overload or ultimate extraneous load limits as defined in the glossary of terms or, when applicable, higher than maximum speed. When in doubt, consult factory. Honeywell is not responsible for any property damage or personal injury which may result because of the misapplication of the transducer.



Model 2121-2126



Torque range 100, 200, 500, 1K, 2K, 5K, 10K, 20K, 50K, 100K, 200K, 500 K lb-in




Output @ rated capacity 2 mV/V (nominal)*

* Model 2126-500K output at rated capacity is 2.7 mV/V nominal. Highercapacitiesavailable.Consultfactoryfordetails.





Temperature effect, zero ±0.002%/ofratedoutput°F

Temperature effect, output ±0.002%/ofreading°F






Number of bridges 1





Power Supply



ComputerPLC

MODEL 2121-2126


UVUV-10UBPU3WU2W

DV-05DA-05DV10

In-Line Amplifiers



Output



2003.1 lb.L1 L2 L3 L4

UP DOWN


ENTERSETUP EXIT


Display Units

064-LW13621 Mating Connector7200-76-XX* Mating connector & 6 conductor cable (unamplified unit with sense leads but not shunt cal)7200-75-XX** Mating connector & 4 conductor cable (unamplified unit without sense leads but not shunt cal)7200-111-XX* Mating connector & 6 conductor cable (for connection to instrument 7541)7200-110-XX** Mating connector & 4 conductor cable (for connection to instrument 7541)




LOAD CARRYING CAPACITYCenter of gravity

to test unit

P

S

W

W - weightW x S - overhung momentS - distance to WDo not exceed moment (W x S) or shear (W), whichever value is attained first P = thrust



Shaft Reaction Torque Sensor


Model CapacityNm [lb-in]

Overload Nm [lb-in]

Torsional stiffness Nm/rad [lb-in/rad]


Max. shear W N [lb]


Key size square cm [in]

2121-100 10[100] 15[150] 726[6430] 11.30[100] 89[20] 1245[280] 0,48[0.19]

2121-200 20[200] 30[300] 1921[17000] 22.60[200] 115[26] 1780[400] 0,48[0.19]

2121-500 55[500] 85[750] 5107[45200] 28.25[250] 2225[500] 2225[500] 0,64[0.25]

2121-1K 115[1000] 170[1500] 11637[103000] 56.50[500] 4450[1000] 2935[660] 0,64[0.25]

2121-2K 225[2000] 340[3000] 22256[197000] 113.00[1000] 6675[1500] 8900[2000] 0,64[0.25]

2122-5K 565[5000] 850[7500] 42819[379000] 225.00[2000] 9340[2100] 13350[3000] 0,95[0.38]

2122-10K 1130[10000] 1695[15000] 84734[750000] 450.00[5000] 17800[4000] 26670[6000] 0,95[0.38]

2124-20K 2250[20000] 3390[30000] 294875[2610000] 1130[10000] 28900[6500] 44480[10000] 1,27[0.50]

2125-50K 5650[50000] 8475[75000] 772777[6840000] 2710[24000] 53375[12000] 80064[18000] 1,91[0.75]

2125-100K 11300[100000] 16950[150000] 1378346[12200000] 5650[50000] 89000[20000] 133440[30000] 1,91[0.75]

2126-200K 22600[200000] 33900[300000] 2253935[19950000] 10170[90000] 133440[30000] 177920[40000] 2,54[1]

2126-500K* 56500[500000] 85000[750000] 2852725[25250000] 17000[150000] 186800[42000] 266880[60000] 2,54[1]

*Calibrationperformedto300000lb-in.Consultfactoryforhighercalibrations.

Metric dimensions and specifications are purely mathematical calculations from Standard English dimension control drawings. Requestcertifieddrawingsbeforedesigningmountingsorfixtures.Dimensions and specifications are subject to change without notice.

MOUNTING DIMENSIONS

Model C cm [in] L cm [in] N cm [in] P cm [in] U cm [in]* R cm [in]

2121-500, -1K, -2K 25,40[10] 6,03[2.38] 5,72[2.25] 5,08[2] 2,54[1] 14,29[0.56]

2122-5K, -10K 32,40[12.75] 7,62[3] 7,54[2.97] 5,08[2] 3,81[1.50] 6,03[2.38]

2124-20K 37,15[14.63] 9,53[3.75] 10,16[4] 7,62[3] 5,72[2.25] 5,24[2.06]

2125-50K, -100K 48,26[19] 12,70[5] 15,24[6] 12,70[5] 7,62[3] 2,54[1]

2126-200K, -500K** 53,34[21] 14,61[5.75] 16,51[6.50] 13,97[5.50] 11,43[4.50] 2,86[1.13]

* Tolerance on shaft diameter +0.0000 - 0.0005**Calibrationperformedto300000lb-in,consultfactoryforhighercalibrations

Forreferenceonly

N L R N P

C

MS-3102E-14S-5P

U


SensingandControl


Honeywell



+1-815-235-6847



Model 2121-2126 Shaft Reaction Torque Sensor












Reaction Socket Torque SensorModel 2133-300 Series

DESCRIPTIONThese cost-efficient sensors are primarily used in torque wrench

calibration applications. Socket-wrench torque monitoring may

be performed by the Model 2133-300 series. Also, may be used

in a production line/assembly line stall nutrunner set-up and

calibration.

FEATURES• 10ft-lbto1000ft-lbcapacities


• Adaptableforportableusage

• Nospecialadaptertoolsrequired

• Repeatabletorquemeasurements



Model 2133-300 Series Reaction Socket Torque Sensor



Torque range 10,20,50,100,250,600,1000lb-ft




Output @ rated capacity 2 mV/V nominal






Temperature effect, span ±0.002%ofreading/°F






Zero balance ±5%orbetterofratedoutput




Power Supply



ComputerPLC

MODEL 2133


UVUV-10UBPU3WU2W

DV-05DA-05DV10

In-Line Amplifiers



Output



2003.1 lb.L1 L2 L3 L4

UP DOWN


ENTERSETUP EXIT


Display Units


D SQ.DRIVE

4 CONDUCTOR SHIELDED CABLE

C

Ø E

Ø B

A

Ø E

Model Capacity lb-ft

A in Ø B in C in D Ø E in

2133-301-10 10 1.75 0.60 0.38 1/4 0.69

2133-301-20 20 1.75 0.60 0.38 1/4 0.69

2133-302-50 50 2.50 0.94 0.50 3/8 1.00

2133-303-100 100 2.62 0.94 0.62 1/2 1.00

2133-304-250 250 3.50 1.69 0.69 5/8 1.75

2133-305-600 600 3.62 1.69 0.81 3/4 1.75

2133-306-1K 1000 4.75 1.94 1.09 1 2.00

Forreferenceonly

MOUNTING DIMENSIONS


SensingandControl


Honeywell



+1-815-235-6847



Model 2133-300 Series Reaction Socket Torque Sensor

Warranty. Honeywell warrants goods of its manufacture as beingfreeofdefectivematerialsandfaultyworkmanship.Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywellduringtheperiodofcoverage,Honeywellwillrepairor replace, at its option, without charge those items it finds defective.The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.

Whileweprovideapplicationassistancepersonally,throughourliterature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.

Specifications may change without notice. The information we supplyisbelievedtobeaccurateandreliableasofthisprinting.However,weassumenoresponsibilityforitsuse.









Flange Reaction Torque TransducerModel QFFH-9

DESCRIPTIONModel QFFH-9 flange reaction torque transducer is designed for

installation between test pieces such as motors, switches, axles


are calibrated in both directions. Stainless steel construction en-

hances durability in harsh, industrial environments. These mod-

els have no moving parts and utilize four bonded strain gages

on a special machined portion of the transducer to achieve a

maximum non-linearity of 0.1% over a wide dynamic range.

Typical applications include tire braking, motor dynamometers,

friction-skid testing, and twist measurement.



• Widedynamicrange


• Stainlesssteelconstruction



Model QFFH-9



Range 3000;6000;12000;24000in.-lb

System accuracy ±0.1 % full scale

Linearity ±0.1 % full scale

Hysteresis ±0.1 % full scale


Output 2mV/Vnominal

Resolution Infinite





Temperature effect, zero 0.005%fullscale/°F

Temperature effect, span 0.005%reading/°F



Strain gage type Bonded foil

Excitation 10Vdc

Bridge resistance 350ohm

Electrical termination BendixPTIH-10-6Porequivalent

Mating connector PT06A-10-6Sorequivalent(notincluded)

RANGE CODES

Range Code Available rangesTR 3000in-lb

TT 6000in-lb

TV 12000in-lb

TW 24000in-lb

OPTION CODES


Torque range 3000,6000,1200,24000in-lb



Internal amplifiers



6a.BendixPTIH-10-6P-6-pin(max.121°C[250°F])

6b.MSconnectorMS3102E-14S-6P(mateswithMS3106E-14S-6S,max160°F)

6e. Integral cable: Teflon6f.Integralcable:PVC6g. Integral cable: Neoprene6h. Integral cable: Silicone

Interfaces53e. Signature calibration53t.T.E.D.S.IEEE1451.4module



Flange Type Reaction Torque Transducer



Static overload capacity 50 % over capacity

Casematerial Stainless steel


For reference only

MOUNTING DIMENSIONS

Range (in-lb)

ØD1 mm [in]

W mm [in]

A mm [in]

C mm [in]dia. B.C.

E mm [in]dia. Thru

3000,6000

101,6mm[4.00in]

76,2mm[3.00in]

12,7mm[0.50in]

82,55mm[3.25in]

8,38mm[0.33in]

12000,24000

127mm[5.00in]

88,9 mm [3.50in]

19,05 mm [0.75in]

107,95mm[4.25in]

9,9 mm [0.39in]


SensingandControl


Honeywell



+1-815-235-6847



Model QFFH-9 Flange Type Reaction Torque Transducer

Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed tootherwisebyHoneywellinwriting;pleaserefertoyourorder acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.

Whileweprovideapplicationassistancepersonally,throughourliterature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.










Flanged Reaction Torque SensorModel 2110-2116

DESCRIPTIONModel 2110-2116 flanged reaction torque sensor is designed for

installation between test pieces such as motors, switches, axles,


are calibrated in both directions. Nickel-plated alloy steel con-





range. Typical applications include tire braking, motor dyna-

mometers, friction-skid testing, and twist measurement. 2000

in-lb to 2400000 in-lb capacities.



• Hightorsionalstiffness

• Higherresistancetobendingmoments

• Low-endsensitivityduetoabsenceofmovingparts

Safetyconsiderations:ItwouldbeunsafetooperateHoneywelltorquesensorsandload cells beyond static overload or ultimate extraneous load limits as defined in the glossary of terms or, when applicable, higher than maximum speed. When in doubt,consultfactory.Honeywellisnotresponsibleforanypropertydamageorpersonal injury which may result because of the misapplication of the transducer.



Model 2110-2116



Torque range 2000 lb-in to 2400000 lb-in
















Number of bridges 1



LOAD CARRYING CAPACITY




Power Supply



ComputerPLC

MODEL 2110-2116


UVUV-10UBPU3WU2W

DV-05DA-05DV10

In-Line Amplifiers



Output



2003.1 lb.L1 L2 L3 L4

UP DOWN


ENTERSETUP EXIT


Display UnitsFor long cable runs or electrically noisy environments an amplified sensor or locally mounted amplifier is often preferred




S

P

W

S

P

W

MS-3102E-145-5P

ØJ ØF B.C.

ØDØGØG

H

N N

C

H

MODEL 2110 MODEL 2404



Flanged Reaction Torque Sensor



Overload Nm [lb-in]



Max. shear W N [lb]


2110-2K 225[2000] 340[3000] 43384[384000] 113[1000] 6675[1500] 8895[2000]

2110-5K 565[5000] 845[7500] 103941[920000] 226[2000] 8896[2000] 13344[3000]

2111-10K 1130[10000] 1690[15000] 302784[2680000] 565[5000] 17800[4000] 26688[6000]

2111-20K 2250[20000] 3380[30000] 649630[5750000] 1130[10000] 28900[6500] 44480[10000]

2111-30K 3390[30000] 5085[45000] 1129790[10000000] 1695[15000] 3863[8500] 57824[13000]

2112-50K 5650[50000] 8475[75000] 903833[8000000] 2704[24000] 53375[12000] 80064[18000]

2112-100K 11300[100000] 16950[150000] 2259584[20000000] 5650[50000] 89000[20000] 133440[30000]

2113-200K 226000[200000] 33900[300000] 3773505[33400000] 10170[90000] 133440[30000] 177920[40000]

2114-300K 33900[300000] 50850[450000] 6778752[60000000] 16950[150000] 186800[42000] 266880[60000]

2114-500K* 56500[500000] 84750[750000] 12879628[114000000] 22600[200000] 244640[55000] 355840[80000]

2115-600K* 67796[600000] 101695[900000] 18079096[160000000] 22600[200000] 422560[95000] 400320[90000]

2115-750K* 84745[750000] 127119[1125000] 23728814[210000000] 28250[250000] 489280[110000] 467040[105000]

2116-1200K* 135593[1200000] 203375[1800000] 20338983[180000000] 39550[350000] 622720[140000] 578240[130000]

2116-2400K* 271186[24000000] 406800[3600000] 48587570[430000000] 79096[700000] 1000800[225000] 934080[210000]

*Calibrationperformedto300000lb-in.Consultfactoryforhighercalibrations.

MOUNTING DIMENSIONS

Model C cm [in]

D cm [in]

F cm [in]

G* cm [in]

H cm [in]

N cm [in]

J** cm [in]

2110-2K, -5K 7,62[3] 10,16[4] 8,26[3.25] 3,81[1.50] 0,32[0.13] 1,27[0.50] 0,83[0.33]

2111-10K, -20K 8,89[3.50] 12,70[5] 10,80[4.25] 5,08[2.00] 0,64[0.25] 1,91[0.75] 0,99[0.39]

2112-50K, -100K 18,73[7.38] 20,32[8] 16,51[6.50] 8,89[3.50] 0,79[0.31] 3,81[1.50] 1,63[0.65]

2113-200K 21,59[8.50] 24,77[9.75] 20,32[8] 10,16[4] 0,79[0.31] 3,81[1.50] 1,94[0.77]

2114-300K,-500K**** 26,67[10.50] 35,63[14] 27,94[11] 15,24[6] 0,79[0.31] 5,08[2] 2,59[1.02]

2115-600K,-750K**** 26,67[10.50] 38,10[15] 30,48[12] 15,24[6] 0,79[0.31] 5,08[2] 3,85[1.52]

2116-1200K, -2400K**** 40,64[16] 50,80[20] 40,64[16] 20,32[8] 1,27[0.50] 5,08[2] 3,86[1.52]***

* Tolerance on shaft diameter +0.002 - 0.00** Eight equally spaced holes are located within 0.005 in of true position*** 16 equally spaced holes****Calibrationperformedto300000lb-inmax.

Forreferenceonly

S

P

W

S

P

W

MS-3102E-145-5P

ØJ ØF B.C.

ØDØGØG

H

N N

C

H


S

P

W

S

P

W

MS-3102E-145-5P

ØJ ØF B.C.

ØDØGØG

H

N N

C

H



SensingandControl


Honeywell



+1-815-235-6847



Model 2110-2116 Flanged Reaction Torque Sensor

Warranty. Honeywellwarrantsgoodsofitsmanufactureasbeing free of defective materials and faulty workmanship. Honeywell’sstandardproductwarrantyappliesunlessagreedtootherwisebyHoneywellinwriting;pleaserefertoyourorder acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywellduringtheperiodofcoverage,Honeywellwillrepairor replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.











Hollow Reaction Torque SensorModel 2320

DESCRIPTIONModel 2320 hollow reaction torque sensor is designed for hous-

ing reaction force measurement in mixing, hydraulic pump,

and motor test applications. These models operate and are

calibrated in both directions. Nickel-plated alloy steel con-





range. 12000 in-lb to 36000 in-lb capacities.



• Hightorsionalstiffness

• Highresistancetobendingmoments

• Low-endsensitivityduetoabsenceofmovingparts

Safetyconsiderations:ItwouldbeunsafetooperateHoneywelltorquesensorsandload cells beyond static overload or ultimate extraneous load limits as defined in the glossary of terms or, when applicable, higher than maximum speed. When in doubt,consultfactory.Honeywellisnotresponsibleforanypropertydamageorpersonal injury which may result because of the misapplication of the transducer.



Model 2320



Torque range 12000, 36000 lb-in















Bridge resistance 350 ohm (nominal)

Number of bridges 1



LOAD CARRYING CAPACITY




Power Supply



ComputerPLC

MODEL 2320


UVUV-10UBPU3WU2W

DV-05DA-05DV10

In-Line Amplifiers



Output



2003.1 lb.L1 L2 L3 L4

UP DOWN


ENTERSETUP EXIT


Display Units





S

P

W

S

P

W

MS-3102E-145-5P

ØJ ØF B.C.

ØDØGØG

H

N N

C

H




Hollow Reaction Torque Sensor



Overload Nm [lb-in]



Max. shear W N [lb]


2320-12K 1350[12000] 2030[18000] 677875[6000000] 676[6000] 6672[1500] 26688[6000]

2320-36K 4050[36000] 6085[54000] 3389376[30000000] 1694[15000] 13344[3000] 66720[15000]

MOUNTING DIMENSIONS

Forreferenceonly


SensingandControl


Honeywell



+1-815-235-6847



Model 2320 Hollow Reaction Torque Sensor












Model QWFK-8M

DESCRIPTIONModels QWFK-8M miniature reaction torque transducers is en-

gineered for minimum size and to achieve 0.1% maximum non-

linearity. Four bonded strain gages are positioned on a special

machined portion of the transducer to effectively measure even

slight torque motion. These models operate and are calibrated

in both directions. A modular, stainless steel construction and no

moving parts provide excellent durability under harsh industrial

conditions. Potential miniature reaction torque transducer appli-

cations include motor dynamometer, tire braking, twist measure-

ment, and friction-skid test measurements.

FEATURES• 25in-ozto300in-lb


• Compactsize

• Highfrequency


• Integralcable(standard)

Miniature Reaction Torque Transducer



Model QWFK-8M



Range 25,100,250in-oz;50,100,300in-lb

Systemaccuracy ±0.1 % full scale

Linearity ±0.1 % full scale

Hysteresis ±0.1 % full scale


Output 2mV/Vnominal

Resolution Infinite





Temperature effect, zero 0.005%fullscale/°F

Temperature effect, span 0.005%reading/°F



Straingagetype Bonded foil

Excitation 10Vdc(5Vdciftorquerange<100in-oz)

Bridge resistance 350ohm

Electrical termination Tefloncable(1.5m[5ft])

RANGE CODES

Range Code Available rangesTB 25in-oz

TD 100 in-oz

TF 250in-oz

TH 50in-lb

TJ 100 in-lb

OPTION CODES


Torque range 25,100,250in-oz;50,100,300in-lb



Internal amplifiers



6e.Integralcable:Teflon





MOUNTING DIMENSIONS





Deflection torsional, 25in-ozto50in-lb

0.0027radians

Deflection torsional, 100in-lbto300in-lb

0.00255radians


For reference only


SensingandControl


Honeywell



+1-815-235-6847



Model QWFK-8M Miniature Reaction Torque Transducer

Warranty. Honeywellwarrantsgoodsofitsmanufactureasbeing free of defective materials and faulty workmanship. Honeywell’sstandardproductwarrantyappliesunlessagreedtootherwisebyHoneywellinwriting;pleaserefertoyourorderacknowledgementorconsultyourlocalsalesofficeforspecificwarrantydetails.IfwarrantedgoodsarereturnedtoHoneywellduringtheperiodofcoverage,Honeywellwillrepairorreplace,atitsoption,withoutchargethoseitemsitfindsdefective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.











Miniature Reaction Torque TransducerModel QWLC-8M

FEATURES• 25in-ozto300in-lbs


• Compactsize



• Integralcablestandard

DESCRIPTIONModelQWLC-8Mminiaturereactiontorquetransducerisareen-

gineeredforminimumsizeandtoachieve0.1%maximumnon-

linearity.Fourbondedstraingagesarepositionedonaspecial

machinedportionofthetransducertoeffectivelymeasureeven

slighttorquemotion.Thesemodelsoperateandarecalibrated

inbothdirections.Amodular,stainlesssteelconstructionandno

movingpartsprovideexcellentdurabilityunderharshindustrial

conditions.Potentialminiaturereactiontorquetransducerappli-

cationsincludemotordynamometer,tirebraking,twistmeasure-

ment,andfriction-skidtestmeasurements.



Model QWLC-8M



Range 25,100,250in-oz;50,100,300in-lb

Systemaccuracy ±0.1%fullscale


Hysteresis ±0.1%fullscale


Output 2mV/Vnominal

Resolution Infinite





Temperatureeffect,zero 0.005%fullscale/°F

Temperatureeffect,span 0.005%reading/°F



Straingagetype Bondedfoil

Excitation 10Vdc(5Vdciftorquerange<=100in-oz)

Bridgeresistance 350ohm

Electricaltermination Tefloncable(1.5m[5ft])

RANGE CODES

Range Code Available rangesTB 25in-oz

TD 100in-oz

TF 250in-oz

TH 50in-lb

TJ 100in-lb

TL 300in-lb

OPTION CODES


Torque range 25,100,250in-oz;50,100,300in-lb



Internal amplifiers



6e.Integralcable:Teflon





MOUNTING DIMENSIONS





Deflectiontorsional,25in-ozto50in-lb

0.0027radians

Deflectiontorsional,100in-lbto300in-lb

0.00255radians


Forreferenceonly


SensingandControl


Honeywell



+1-815-235-6847



Model QWLC-8M Miniature Reaction Torque Transducer












Torque Thrust Transducer

Model 6459 and 6467-6470

DESCRIPTIONModels 6459 and 6467-6470 torque thrust transducers are used

in applications where the need to sense both torque and thrust

parameters simulteaneously. Nickel-plated, alloy steel, one-

piece construction. Designed specifically to provide the strength

and rigidity required to withstand extraneous loads and bending

moments. Unique construction provides both maximum structure

life and minimum thrust/torque crosstalk.

FEATURES• 900in-lb/1500lbsto100Kin-lb/200Klbs(standard)


• Reducedcrosstalk

• Extraneousloadresistance

• Singlepiececonstruction

• Fatiguerated

6459- Low capacity



Model 6459 and 6467-6470



Torque range 900,5K,25K,50K,100Klb-in




Output @ rated capacity ±1.5mV/V(nominal)(Bothcomponents)











Bridgeresistance 700ohm(nominal)

Zero balance ±1%ofratedoutput

Staticoverloadcapacity 150%ofratedcapacity



Output Input

Serial Number

Power Supply



ComputerPLC

MODEL 6459-6470


UVUV-10UBPU3WU2W

DV-05DA-05DV10

In-Line Amplifiers



Output



2003.1 lb.L1 L2 L3 L4

UP DOWN


ENTERSETUP EXIT

Display Units





SC1000 SC2000SC2001 SC3004


Output Input

Serial Number

Power Supply


UVUV-10UBPU3WU2W

DV-05DA-05DV10

In-Line Amplifiers



Output



NOTE: There are twoconnectors on the transducer.They both need a cableand an amp.



Torque Thrust Transducer

6459 - MOUNTING DIMENSIONS 6469 - MOUNTING DIMENSIONS

6467 - MOUNTING DIMENSIONS 6470 - MOUNTING DIMENSIONS

6468 - MOUNTING DIMENSIONS

Forreferenceonly Forreferenceonly

Forreferenceonly Forreferenceonly

Forreferenceonly


SensingandControl


Honeywell



+1-815-235-6847



Model 6459 and 6469-6470 Torque Thrust Transducer












Model 366

DESCRIPTIONThe 366 low range torque watch gage series accurately mea-

sures very low torque. Three miniature adapter chucks allow sim-

ple coupling to the device being measured. To minimize friction,

a calibrated spring, shaft, and pointer assembly are mounted in

jeweled bearings. The unit can measure torque in either a clock-

wise or counterclockwise direction. A stainless steel internal

rotation stop helps prevent damage from over-torque up to three

times the normal range.

FEATURES• 0.2gm-cmto42gm-cm[0.003in-ozto0.6in-oz]capacities

• 5%(366-0)and10%(366-2,366-3)accuracy

• Threeminiatureadapterchucksavailable

• Dialindication(standard)

• Overloadprotection

Low Range Torque Watch Gauge Series


Sensing and Control


Honeywell



+1-815-235-6847



Model 366 Low Range Torque Watch Gauge Series




For more information about Sensing and Control products, visit www.honeywell.com/sensingorcall+1-815-235-6847Email inquiries to [email protected]







Standard Metric

Model Ordercodes

oz-in Model Ordercodes

gm-cm

Accuracy

366-0 TQ3660 0.06to0.6

366-0M TQ3660M 6 to 42

±5%

366-2 TQ3662 0.01to0.1

366-2M TQ3662M 1to7.5

±10%

366-3 TQ3663 0.003to0.03

366-3M TQ3663M 0.2to2

±10%


Mid Range Torque Watch Gauge Series

Model 651

DESCRIPTIONThe 651 mid-range torque watch gage series provides accurate

measurement of low static torque. A 1/4 inch keyed chuck

provides a simple means of coupling to the device under

measurement.

The 651 Series utilizes a calibrated spring, shaft, and pointer

assembly within a rugged steel and aluminum housing. The unit

can measure torque in either a clockwise or counterclockwise

direction. Internal stainless steel rotation stops help prevent

damage from over-torque up to two times the normal range.

FEATURES• 2.5gm-cmto2.8kgm-cm[0.05in-ozto40in-oz]

[0.5N-mmto265N-mm]capacity

• 2%accuracy

• 1/4-inkeyedchuckstandard

• Dialindication



Sensing and Control


Honeywell



+1-815-235-6847



Model 651 Mid Range Torque Watch Gauge Series











Standard Metric

Model Order codes

oz-in Model Order codes

gm-cm

651C-1 TQ651C1 0.05to1.2 651C-1M TQ651C1M 2.8-80

651C-2 TQ651C2 1to20 651C-2M TQ651C2M 50-1.2k

651C-3 TQ651C3 2to40 651C-3M TQ651C3M 150-2.8k

651X-2 TQ651X2 0.1to2.4 651X-2M TQ651X2M 5-150

651X-3 TQ651X3 0.25to5 651X-3M TQ651X3M 10-300

651X-4 TQ651X4 0.5to10 651X-4M TQ651X4M 25-600

System International

Model Order codes

N-mm Accuracy

651C-1SI TQ651C1SI 0.5to9 ±2%

651C-2SI TQ651C2SI 10to140 ±2%

651C-3SI TQ651C3SI 15to285 ±2%

651X-2SI TQ651X2SI 1to18 ±2%

651X-3SI TQ651X3SI 2to36 ±2%

651X-4SI TQ651X4SI 5to70 ±2%


High Range Torque Watch Gauge Series

Model 940

DESCRIPTIONThe 940 high-range torque watch gage series accurately

measures high range torque. A 3/8 inch keyed chuck and a 3/8

inch square socket driver adaptor provides a simple means of

coupling to the device under measurement.

The 940 Series utilizes a calibrated spring, shaft, and pointer

assembly within a rugged steel and aluminum housing. The unit

can measure torque in either a clockwise or counterclockwise

direction. Internal stainless steel rotation stops help prevent

damage from over-torque up to two times the normal range.

FEATURES• 2.5kgm-cmto2.8kgm-cm[15in-ozto200in-oz]

[0.1Nmmto1.4Nmm]capacities

• 2%accuracy

• 3/8-inkeyedchuck(standard)and3/8-insquaresocket

driveradapter(optional)

• Dialindication



Sensing and Control


Honeywell



+1-815-235-6847



Model 940 High Range Torque Watch Gauge Series











Standard Metric

Model Order codes

oz-in Model Order codes

Kgm-cm

940-1 TQ9401 30to200 940-1M TQ9401M 2to14

940-2 TQ9402 15to100 940-2M TQ9402M 1to7

System International

Model Order codes

N-mm Accuracy

940-1SI TQ9401SI 0.25to1.4 ±2%

940-2SI TQ9402SI 0.1to0.7 ±2%


499

ACCESSORIES


AccessoriesHoneywell provides a wide range of accessories for the pressure, load, torque, accelerometers, displacement transducers (LVDT), digital gages and instrumentation products, which are designed to meet additional requirements for most customer applications. Accessories can range from load buttons and pull plates for load cells; shackles and bearings for rod end load cells; mounting studs and adapters for accelerometers; adapters for pressure products; various instrumentation accessories; connectors and cable assemblies for all products.

The breadth of accessories options, facilitate one stop shopping for all sensor and system configuration needs.

Manyaccessoriescanshipfromourextensivequick-shipprogram,andothersareavailablewithcustomizedoptionsorasfullycustomdesigns.PleaseseeourWebsiteforupdatedlistings(http://sensing.honeywell.com/TMsensor-ship).

T&M_Catalog.indb 499 3/24/2008 3:47:58 PMCourtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

500

ACCESSORIES



Part No. OrderCode Description

FP-2000

Pres

sure

DigitalG

auge

Pr

essu

re

Diffe

rential

Pres

sure

Load

Torque

Accelerometers

Displacement

Tran

sduc

ers

Instrumentatio

n

MOUNTINGBLOCK

064-0547-02 AA235 JTF triaxial mounting kit X

MATINGCONNECTORS

023-0032-00 AA111 Mating connector, straight plug, general duty PT06A-10-6A X X X X

023-0046-00 AA121 Mating connector, straight plug, MS3106A-14S-6S (SR) X

023-0076-00 AA141 Mating connector, Microtec type DP-4S-1 X

023-0528-00 AA151 Mating connector, MS3476L-10-6S for high-temp applications X X X

023-0568-03 AA155 Mating connector for DIN 43650, 1/2 NPTF socket with gasket X X

023-0568-01 AA156 Mating connector for DIN 43650, PG9 socket with gasket (4,5 mm to 7 mm) X X

023-0568-02 AA157 Mating connector for DIN 43650, PG11 socket with gasket (6 mm to 10 mm) X X

023-0546-00 AA161 Mating connector for DIN 40050, 4 pole socket X

023-0086-00 AA119 Mating connector straight plug, general duty PT06A-10-6P X X X

023-0092-00 AA162 Mating connector straight plug, general duty PC06A-10-6S X

023-0768-00 023-0768-00 Mating connector straight plug, solid shell MS3106F-14-2S X

023-1074-00 AA136 Phoenix connector X

023-LW180-038 023-LW180-038 Mating connector, MS3106A-14S-5S X

023-LW181-034 023-LW181-034 Mating connector, PT06W-10-6S X X X X

023-LW185-027 023-LW185-027 Mating connector, KV 120 X

MATINGCONNECTOR/CABLEASSEMBLIES

060-0603-17 AA113 Cable assembly with 15 ft of four conductor cable X X X X

060-0603-18 AA114 Cable assembly with 15 ft of six conductor cable X X

060-0603-19 AA115 Cable assembly with 15 ft of five conductor cable X X

060-0603-43 AA116 Cable assembly with 15 ft of three conductor cable X X

060-0603-46 AA117 Cable assembly with 15 ft of four conductor cable X X

060-0603-12 AA123 Cable assembly with 15 ft of four conductor cable X

060-0603-31 AA124 Cable assembly with 15 ft of six conductor cable X

060-0603-32 AA125 Cable assembly with 15 ft of five conductor cable X

060-0603-08 AA127 Cable assembly with 15 ft of four conductor cable to mate with model NK X

060-0436-04 AA143 Cable assembly with 15 ft of four conductor cable X

060-0603-07 AA153 Cable assembly with 15 ft of four conductor cable for high-temperature applications X X

060-0603-68 AA159 Cable assembly with 15 ft of four conductor cable for DIN 43650 X X


060-0603-140 AA516 Cable assembly with 15 ft of three conductor cable X


Many products are included in our “quick-ship” program. Please see http://sensing.honeywell.com/TMsensor-ship for updated listings.

Quick-ship program - accessories Our quick-ship program for test and measurement products includes thousands of finished transducers, load cells, accelerometers, displacement transducers, instrumentation and amplifiers in a wide variety of models and ranges. This diversity readily accommodates most applications, and provides immediate solutions to your urgent sensor needs.

To learn more about Honeywell’s quick-ship program for instruments and amplifiers, visit our Web site or contact our sales support team at 800.848.6564 (+1 614.850.5000).

Manyproductscanshipfromourextensivequick-shipprogram,andothersareavailablewithcustomizedoptionsorasfullycustomdesigns.


501

ACCESSORIES


Part No. OrderCode Description

FP-2000

Pres

sure

DigitalG

auge

Pr

essu

re

Diffe

rential

Pres

sure

Load

Torque

Accelerometers

Displacement

Tran

sduc

ers

Instrumentatio

n

ELECTRONICS

060-6831-00 AA180 Signature calibration module - inline X

060-3110-00 AA911 Four transducer summing box X

060-5673-01 AA912 Mating connectors set for summing box X

032-0391-00 AA923 Splash-proof ft for 1/8 DIN meters X

060-6804-01 AA924 Bench mount adapter for GM/DM families X

060-6814-00 AA925 Bench mount adapter for 1/8 in DIN X

060-6815-00 AA926 Bench mount hand adapter for 3/8 in DIN X

032-0371-00 AA927 Panel mount clip for GM 1/8 in DIN X

032-0438-00 AA928 Panel mount kit, 3/8 in DIN metal case X

LEBOWLOAD/TORQUE

043-LW525-034-LF 043-LW525-034-LF RF cable assembly for TMS9000 - 57 ft BNC-BNC X

064-LW10983-10 064-LW10983-10 Brush and spring assembly X

064-LW30774-1 064-LW30774-1 Load base kit X

7200-75-10 7200-75-10 Assembly cable, 10 ft X

7205-75-10 7205-75-10 Assembly cable, 10 ft X

LOADCELLPULLPLATES,BEARINGS,ANDLOADBUTTONS

064-0365-02 AA222 Pull plate assembly 3/8-24 UNF-2B X

064-0365-03 AA223 Pull plate assembly 1/2-20 UNF X

064-0365-04 AA224 Pull plate assembly 1 in - 14 UNS X

064-0365-05 AA225 Pull plate assembly 1½-12 UNF X

050-1196-02 AA242 Load button 3/8-24 UNF-2A X

050-1196-03 AA243 Load button 1/2-20 UNF thread X

050-1196-04 AA244 Load button 1 in - 14 UNF thread X

050-1196-05 AA245 Load button with 1½-12 UNF thread X

032-0084-01 AA271 Bearing rod end 1/4-28 female X




DISPLACEMENTTRANSDUCERMOUNTINGBLOCK

032-1148-00 AA937 Displacement transducer mounting block X

032-1277-00 AA945 Displacement transducer mounting block, miniature X

PRESSUREPORTADAPTER

050-6417-00 AA312 7/16-20 UNF female to 1/4-18 female X X

031-0009-00 AA313 1/4-18 female to 7/16-20 male X X X

031-0118-00 AA314 1/4-18 male to 1/8-27 female X X

031-0098-00 AA315 1/4-18 NPT male to 7/16-20 female X X

031-0070-00 AA316 7/16-20 male to 1/4-18 male X X

031-0010-00 AA317 1/8-27 male to 7/16-20 male X X

031-0007-00 AA318 1/4-18 male to 1/4-18 male X X

031-0076-00 AA319 1/4-18 NPT female to 1/4-18 NPT female X X X

77-00897-00 SS9 9/16-18 male to 1/4-18 NPT male X X X X

031-0155-00 9/16-18 UNF-2A (SAE) to 1/4-18 NPT X

SHUNTCALIBRATORRESISTOR

020-5902-23-01 AA211 Resistor 59K, 0.1 %, 25 PPM metal film X X X

020-9002-23 AA212 Resistor 90K ohm, 0.1 % X X X

030-2003-23 AA213 Resistor 200K ohm, 0.1 % X X X


502

ACCESSORIES



Ordercode Model Description Matingconnectorfor

AA111 PT06A-10-6S Mating connector Sensors with PT1H-10-6P connector

AA118 PT06E-10-6S Environmental mating connector

Sensors with PT1H-10-6P connector

Accessories-MatingConnectorsandConnector/CableAssemblies


AA119 PT06A-10-6P (SR) Mating connector Model NK portable instruments


AA121 MS3106A-14S-6S Mating connector Sensors with MS3102E-14S-6P connector


AA141 DP-4S-1 Mating connector Miniature sensors with Microtec-type connectors


AA151 MS3476L10-6S Mating connector Sensors with PTIH-10-6P connectors and high temperature 121 °C to 204 °C [250 °F to 400 °F] specifications


AA155 DIN43650 Mating connector with 1/2 in NPTF conduit fitting

Model 440 pressure sensors

AA156 DIN43650 PG9 socket for 4,5 mm to 7,0 mm cable


AA157 DIN43650 PG11 socket for 6 mm to 10 mm cable


AA161 DIN40050 PG7 socket for 3,5 mm to 6 mm cable

Model FP2000 pressure sensors


AA162 PC06A-10-6S Mating connector Models 45 and 47


AA174 MS3106F-10SL-3S Mating connector Models PEI and PEL


MH002 Two-pin MS type connector

Mating connector MA11, MA12, and MAV51 accelerometers


MH008 62GB connector Mating connector MA15, MAT53. and MAV52 accelerometers


503

ACCESSORIES


Note: Standard cable length is 4,57 m [15 ft]. Other cable lengths and materials are available.

Where a distance of 10,67 m [35 ft] or more separates the readout device and the transducer, remote voltage sensing is recom-mended (Model NK or SC). Use 6-conductor cable in this case.

Ordercode Model Description Connectorwiringcode Cablewiringcode Forusewith

AA112 PT06A-10-6S Mating connector with 4,57 m [15 ft] of 6-conduc-tor PVC cable

A (+) ExcitationB (+) Sense/sig modC (-) ExcitationD (-) Sense/sig modE (-) OutputF (+) Output

Red (+) ExcitationBlack (-) ExcitationGreen (-) OutputWhite (+) OutputBlue (-) Sense/sig modBrown (+) Sense/sig mod

Unamplified units with PT1H-10-6P connector, sense leads, or Sig Mod, but no shunt cal


A & B (+) ExcitationC & D (-) ExcitationE (-) OutputF (+) Output

Red (+) ExcitationBlack (-) ExcitationGreen (-) OutputWhite (+) Output

Unamplified units with PT1H-10-6P connector


A (+) SupplyB (-) OutputC (-) SupplyD (+) OutputE (-) Shunt cal 1F (+) Shunt cal 2

Red (+) SupplyBlack (-) Supply returnGreen (-) OutputWhite (+) OutputBlue (-) Shunt cal 1Brown (+) Shunt cal 2

All amplified units with PT1H-10-6P connector and with the 2a 2b amplifier


A (+) SupplyB&C (-) Output commonD (+) OutputE (-) Shunt cal 1F (+) Shunt cal 2

Red (+) SupplyBlack (-) Output commonWhite (+) OutputBlue (-) Shunt cal 1Brown (+) Shunt cal 2

All amplified units with PT1H-10-6P connector and with the 2c, 2t, 2j amplifier


A (+) SupplyB N/CC N/CD (+) OutputE GroundF N/C

Red (+) SupplyBlack (+) OutputWhite Case ground

All amplified units with PT1H-10-6P connector and with the 2k, 2p, 2y, or 2n (2N) amplifier


A (+) ExcitationB (-) ExcitationC (+) OutputD (-) OutputE N/CF Shunt cal

Red (+) ExcitationBlack (-) ExcitationWhite (+) OutputGreen (-) Output Brown Shunt cal

FP2000 with option 2u and 3d


A (+) SupplyB N/CC N/CD (+) OutputE N/CF Shunt cal

Red (+) SupplyWhite (+) OutputBlack Shunt cal

FP2000 with option 2n (2N) or 2y and 3d


A (+) SupplyB Supply returnC (-) OutputD (+) OutputE N/CF Shunt cal

Red (+) SupplyBlack Supply returnGreen (-) OutputWhite (+) OutputBlue Shunt cal

FP2000 with option 2e or 2f and 3d


A (+) SupplyB Supply returnC (-) OutputD (+) OutputE N/CF N/C

Red (+) SupplyBlack Supply returnGreen (-) OutputWhite (+) Output

FP2000 with option 2d or 2g


504

ACCESSORIES





AA143 DP-4S-1 Mating connector with 4,57 m [15 ft] of 4-conduc-tor Teflon cable

Pin 1 (+) ExcitationPin 2 (+) OutputPin 3 (-) OutputPin 4 (-) Excitation


Miniature sensors with Microtec-type connector



AA152 MS3476L10-6S Mating connector with 4,57 m [15 ft] of 6-con-ductor Teflon cable

A (+) ExcitationB (+) SenseC (-) ExcitationD (-) SenseE (-) OutputF (+) Output

Red (+) ExcitationBlack (-) ExcitationGreen (-) OutputWhite (+) OutputBlue (-) SenseBrown (+) Sense

All unamplified units with high temperature option 121 °C to 204 °C [250 °F to 400 °F] and sense leads, but no shunt cal

AA153 MS3476L10-6S Mating connector with 4,57 m [15 ft] of 4-con-ductor Teflon cable



All unamplified units with high temperature option 121 °C to 204 °C [250 °F to 400 °F] and no sense leads or shunt cal



AA158 064-0435 Mating connector with 1,524 m [5 ft] low noise miniature coaxial cable

Center (+) SignalCase Supply return


Piezo-electric accelerometers with pc/g output

AA160 064-0567 Mating connector with 1,524 m [5 ft] low noise miniature coaxial cable



Piezo-electric accelerometers with pc/g output


505

ACCESSORIES




AA159 060-0603-68 Mating connector with 4,57 m [15 ft] of 4-con-ductor polyurethane cable

Pin 1 (+) SupplyPin 2 (+) OutputPin 3 N/CGND Case ground

Pin 1 RedPin 2 WhitePin 3 GreenGND Black

Model 440 or Model FP2000 with option 6m

NOTE: Wiring code is for two-wire output. Other amplifier options and wiring codes are available.



AA163 PC06A-10-6S Mating connector with 4,57 m [15 ft] of 6-con-ductor Neoprene cable

A (+) ExcitationB (+) OutputC (-) OutputD (-) ExcitationE Sense/sig modF Sense/sig mod

Red (+) ExcitationBlack (-) ExcitationGreen (-) OutputWhite (+) OutputBlue N/CBrown N/C

All unamplified Model 45 and 47 units with sense leads or sig mod, but no shunt cal


Where a distance of 10,67 m [35 ft] or more separates the readout device and the transducer, remote voltage sensing is recommended (Model NK or SC)


AA170 MS3106F-14S-2S

Mating connector with 4,57 m [15 ft] of 2-conduc-tor PVC cable

A N/CB (+) OutputC (+) SupplyD Case ground

N/CBlack (+) OutputRed (+) SupplyWhite Case ground

Model 424 and 425 pressure sensors



CA052 MS3106F-10SL-3S

Mating connector with 5 m [16.4 ft] of 2-conductor PVC cable stainless steel overbraided

A (+) ExcitationB (-) Excitation

White (+) Supply (+) outputBlack (-) Supply returnShield Not connected

MA11, MA12, and MAV51 accelerometers

CA053 MS3106F-10SL-3S

Mating connector with 5 m [16.4 ft] of 2-conductor PTFE cable stainless steel overbraided

A (+) ExcitationB (-) Excitation


MA11, MA12, and MAV51 accelerometers


506

ACCESSORIES





CA108 62GB con-nector

Mating connector with 5 m [16.4 ft] of 2-conductor PVC cable stainless steel overbraided

A (+) SupplyB Not connected C (+) Output


MA15, MAT53, and MAV52 accelerometers

CA137 62GB con-nector

Mating connector with 5 m [16.4 ft] of 2-conductor PTFE cable stainless steel overbraided

A (+) SupplyB Not connected C (+) Output


MA15, MAT53, and MAV52 accelerometers


Ordercode Model Description Connectorwiringcode Forusewith

CA051 Microdot Microdot to microdot connector with 4,57 m [15 ft] of PVC cable

Center (+) OutputCase Ground

PEC, PEC-S, MAQ13, MAQ36, MAQ41 accelerometers

CA338 Microdot Microdot to microdot connector with 4,57 m [15 ft] of PTFE overbraided cable

Center (+) OutputCase Ground

PEC, PEC-S, MAQ13, MAQ36, MAQ41 accelerometers



AA122 MS3106A-14S-6S


A (+) ExcitationB (+) Sense/sig mod C (-) ExcitationD (-) Sense/sig modE (-) OutputF (+) Output

Red (+) ExcitationBlack (-) ExcitationGreen (-) OutputWhite (+) OutputBlue (-) Sense/sig modBrown (+) Sense/sig mod

Unamplified units with MS3102E-14S-6P connector, sense leads, or Sig Mod, but no shut cal. (Models UG, WG, MPB, and high capacity ranges for Model 41, 43, 73, and 75)

AA123 MS3106A-14S-6S




Unamplified units with MS3102E-14S-6P connector, without sense leads, or Sig Mod and without shut cal. (Models UG, WG, MPB, and high capacity ranges for Model 41, 43, 73, and 75)

AA124 MS3106A-14S-6S


A (+) SupplyB (-) Supply return C (-) SupplyD (+) OutputE (-) Shunt cal 1F (+) Shunt cal 2

Red (+) SupplyBlack (-) Supply returnGreen (-) OutputWhite (+) OutputBlue (-) Shunt cal 1Brown (+) Shunt cal 2

Amplified units with MS3102E-14S-6P) connector and with the 2a or 2b amplifier (Model UG, WG, MPB, and high capacity ranges for Model 41, 43, 73, 75)

AA125 MS3106A-14S-6S


A (+) SupplyB & C (-) Output common D (+) OutputE (-) Shunt cal 1F (+) Shunt cal 2

Red (+) SupplyBlack (-) Output commonWhite (+) OutputBlue (-) Shunt cal 1Brown (+) Shunt cal 2

Amplified units with MS3102E-14S-6P) connector and with the 2c, 2t, or 2j amplifier (Model UG, WG, MPB, and high capacity ranges for Model 41, 43, 73, 75)

Where a distance of 10,67 m [35 ft] or more separates the readout device and the transducer, remote voltage sensing is recommended (Model NK or SC)


507

ACCESSORIES


Load Buttons

Ordercode Models41&42range Model75range T thread L1mm[in] L2mm[in] L3mm[in] Dmm[in] Wmm[in]

AA241 5 in-lb to 25 in-lb N/A 1/4-28 UNF-2B 28,57 [1.125] 19,05 [0.750] 6,35 [0.250] 12,50 [0.500] 9,53 [0.375]

AA242 50 in-lb to 1K in-lb 50 in-lb to 100 in-lb 3/8-24 UNF-2B 31,75 [1.250] 22,23 [0.875] 6,35 [0.250] 19,05 [0.750] 15,88 [0.625]

AA243 2K in-lb to 5K in-lb 1K in-lb to 2K in-lb 1/2-20 UNF 34,93 [1.375] 22,23 [0.875] 9,53 [0.375] 19,05 [0.750] 15,88 [0.625]

AA244 7500 in-lb to 15K in-lb 3K in-lb to 7.5 K in-lb 1-14 UNS 60,33 [2.375] 41,28 [1.625] 14,27 [0.562] 38,1 [1.500] 31,75 [1.250]

AA245 20K in-lb to 50K in-lb 10K in-lb to 20K in-lb 1½-12 UNF 66,68 [2.625] 41,28 [1.625] 19,05 [0.750] 57,15 [2.250] 50,8 [2.000]

AA246 75K in-lb to 100K in-lb 30K in-lb to 50K in-lb 2-12 UN 76,2 [3.000] 47,63 [1.875] 23,83 [0.938] 76,2 [3.000] 69,85 [2.750]

AA247 150K in-lb to 200K in-lb 75K in-lb to 100K in-lb 2½-12 UN 107,95 [4.250] 63,5 [2.500] 28,58 [1.125] 88,9 [3.500] 82,55 [3.250]

AA248 300K in-lb to 500K in-lb 150K in-lb to 200K in-lb 3½-8 UN 152,4 [6.000] 101,6 [4.000] 38,1 [1.500] 152,4 [6.000] 127 [5.000]

Ordercode ModelUGrange T thread L1mm[in] L2mm[in] L3mm[in] Dmm[in] Wmm[in]

AA251 50 in-lb to 500 in-lb 3/8-24 UNF-2B 19,05 [0.750] 9,53 [0.375] 6,35 [0.250] 19,05 [0.750] 15,88 [0.625]

AA252 1K in-lb to 4K in-lb 1/2-20 UNF 25,4 [1.000] 12,50 [0.500] 9,53 [0.375] 19,05 [0.750] 15,88 [0.625]

AA253 5K in-lb to 10K in-lb 1-14 UNS 44,45 [1.750] 25,4 [1.000] 14,27 [0.562] 38,1 [1.500] 31,75 [1.250]

AA254 15K in-lb to 30K in-lb 1½-12 UNF 63,5 [2.500] 38,1 [1.500] 19,05 [0.750] 57,15 [2.250] 50,8 [2.000]

AA255 50K in-lb to 75K in-lb 2-12 UN 79,38 [3.125] 50,8 [2.000] 23,83 [0.938] 76,2 [3.000] 69,85 [2.750]

AA256 100K in-lb to 150K in-lb 3-8 UN 127 [5.000] 76,2 [3.000] 38,1 [1.500] 114,3[4.500] 101,6 [4.000]

AA257 200K in-lb 4-8 UN 152,4 [6.000] 101,6 [4.000] 38,1 [1.500] 139,7 [5.500] 127 [5.000]

Ordercode Models45&47range T thread L1mm[in] L2mm[in] L3mm[in] Dmm[in] Wmm[in]

AA290 250 in-lb, 500 in-lb, 1K in-lb, 2.5K in-lb, 5K in-lb 5/8-18 UNF-3A 32,51 [1.28] 25,4 [1.00] 7,11 [0.28] 26,92 [1.06] 23,88 [0.94]

AA291 12.5K in-lb, 25K in-lb 1¼-12 UNF-3A 39,62 [1.56] 17,53 [0.69] 37,85 [1.49] 44,45 [1.75] 31,75 [1.25]

AA292 50K in-lb 1¾-12 UNF-3A 95,25 [3.75] 53,85 [2.12] 41,40 [1.63] 63,5 [2.50] 44,45 [1.75]

AA293 100K in-lb 2¾-8 UNF-3A 127 [5.00] 79,25 [3.12] 47,75 [1.88] 101,6 [4.00] 69,85 [2.75]

Ordercode Staticloadrating* T thread Amm[in] Bmm[in] Cmm[in] Ddia.mm[in]

Edia.mm[in] Llengthmm[in] Hmm[in]

AA360 100000 lb 2½-8 UN-2B 165,10 [6.50] 76,2 [3.00] 77,22 [3.04] 152,4 [6.00] 76,45 [3.01] 260,35 [10.25] 88,9 [3.50]

AA361 100000 lb 2½-12 UN-2B 165,10 [6.50] 76,2 [3.00] 77,22 [3.04] 152,4 [6.00] 76,45 [3.01] 260,35 [10.25] 88,9 [3.50]

AA362 50000 lb 1½-12 UNF-2B 110,49 [4.35] 45,98 [1.81] 64,52 [2.54] 127 [5.00] 44,70 [1.76] 177,8 [7.00] 57,15 [2.25]

AA363 20000 lb 1-14 UNF-2B 61,47 [2.42] 28,19 [1.11] 38,61 [1.52] 76,2 [3.00] 25,65 [1.01] 107,95 [4.25] 38,1 [1.50]

AA364 10000 lb ¾-16 UNF-2B 49,28 [1.94] 23,88 [0.94] 32,51 [1.28] 63,5 [2.50] 19,30 [0.76] 88,9 [3.50] 31,75 [1.25]

YokeShackle

For Models RM and 31 only - STAINLESS STEEL

Ordercode Staticloadrating* T thread Amm[in] Bmm[in] Cmm[in] Ddia.mm[in] Edia.mm[in] Llengthmm[in] Hmm[in]

AA370 120000 lb 2½-12 UN-2B 152,4 [6.00] 69,85 [2.75] 76,2 [3.00] 152,4 [6.00] 76,2 [3.00] 241,3 [9.50] 88,9 [3.50]

AA371 45600 lb 1½-12 UNF-2B 101,6 [4.00] 44,45 [1.75] 63,5 [2.50] 127 [5.00] 44,45 [1.75] 158,78 [6.25] 57,15 [2.25]

AA372 21700 lb 1-14 UNF-2B 58,67 [2.31] 25,4 [1.00] 38,1 [1.50] 76,2 [3.00] 25,4 [1.00] 100,08 [3.94] 41,40 [1.63]

AA373 11200 lb ¾-16 UNF-2B 44,45 [1.75] 19,05 [0.75] 31,75 [1.25] 63,5 [2.50] 19,05 [0.75] 73,15 [2.88] 28,70 [1.13]

AA374 4900 lb ½-20 UNF-2B 31,75 [1.25] 12,50 [0.50] 19,05 [0.75] 44,45 [1.75] 12,50 [0.50] 50,8 [2.00] 19,05 [0.75]

* The static load rating is the maximum capacity in lbs for that part based on a 4:1 load factor (in tension)

CARBON STEEL


508

ACCESSORIES



Ordercode Staticloadrating* T thread Aflatlengthmm[in] Bmm[in] Cflatsmm[in] Ddia.mm[in] Edia.mm[in] Llengthmm[in] Hmm[in]

AA380 100000 lb 2½-8 UN-2B 162,05 [6.38] 76,2 [3.00] 76,2 [3.00] 114,3 [4.50] 76,45 [3.01] 247,65 [9.75] 90,42 [3.56]

AA381 100000 lb 2½-12 UN-2B 162,05 [6.38] 76,2 [3.00] 76,2 [3.00] 114,3 [4.50] 76,45 [3.01] 247,65 [9.75] 90,42 [3.56]

AA382 50000 lb 1½-12 UNF-2B 107,19 [4.22] 51,56 [2.03] 63,5 [2.50] 76,2 [3.00] 44,70 [1.76] 177,8 [7.00] 66,55 [2.62]

AA383 20000 lb 1-14 UNF-2B 64,52 [2.54] 29,46 [1.16] 38,1 [1.50] 50,8 [2.00] 25,65 [1.01] 101,6 [4.00] 31,75 [1.25]

AA384 10000 lb ¾-16 UNF-2B 52,58 [2.07] 23,88 [0.94] 31,75 [1.25] 38,1 [1.50] 19,30 [0.76] 82,55 [3.25] 33,27 [1.31]

AA385 5000 lb ½-20 UNF-2B 33,02 [1.30] 13,97 [0.55] 19,05 [0.75] 25,4 [1.00] 12,95 [0.51] 50,8 [2.00] 17,78 [0.70]

TongueShackle

For Models RM and 31 only - STAINLESS STEEL

Ordercode Staticloadrating* T thread Aflatlengthmm[in] Bmm[in] Cflatsmm[in] Wwidthmm[in] Edia.mm[in] Llengthmm[in] Hmm[in]

AA390 110000 lb 2½-12 UN-2B 231,90 [9.13] 76,2 [3.00] 76,2 [3.00] 152,4 [6.00] 76,2 [3.00] 231,90 [9.13] 88,9 [3.50]

AA391 45000 lb 1½-12 UNF-2B 146,05 [5.75] 44,45 [1.75] 63,5 [2.50] 88,9 [3.50] 44,45 [1.75] 146,05 [5.75] 57,15 [2.25]

AA392 21700 lb 1-14 UNF-2B 96,77 [3.81] 25,4 [1.00] 38,1 [1.50] 50,8 [2.00] 25,4 [1.00] 96,77 [3.81] 41,40 [1.63]

AA393 12000 lb ¾-16 UNF-2B 71,37 [2.81] 19,05 [0.75] 31,75 [1.25] 38,1 [1.50] 19,05 [0.75] 71,37 [2.81] 28,70 [1.13]

AA394 5700 lb ½-20 UNF-2B 50,8 [2.00] 12,50 [0.50] 19,05 [0.75] 25,4 [1.00] 12,50 [0.50] 50,8 [2.00] 19,05 [0.75]

* The static load rating is the maximum capacity in lbs for that part based on a 4:1 load factor (in tension)

CARBON STEEL

Ordercode

Amm[in] Bmm[in] Cmm[in] Ddia.mm[in] Edia.mm[in] Fmm[in] Lmm[in] T Thread Approx.weight(lb)

Staticloadrating(basedon 3:1 load factor)

AA275 6,35 [0.25] 25,4 [1.00] 9,53 [0.375] 19,05 [0.75] 6,35 [0.25] 39,67 [1.562] 49,2 [1.937] ¼-28 UNF 0.043 1700 lb

AA276 9,53 [0.375] 31,75 [1.25] 12,5 [0.500] 25,4 [1.00] 9,53 [0.375] 49,23 [1.938] 61,93 [2.438] 3/8-24 UNF 0.112 3100 lb

AA277 12,5 [0.500] 38,1 [1.50] 15,88 [0.625] 33,32 [1.312] 12,5 [0.500] 61,93 [2.438] 78,59 [3.094] ½-20 UNF 0.249 5400 lb

AA278 19,05 [0.75] 44,45 [1.75] 22,23 [0.875] 44,45 [1.750] 19,05 [0.75] 73,03 [2.875] 95,25 [3.750] ¾-16 UNF 0.602 9300 lb

AW900** 4,98 [0.196] 20,07 [0.79] 7,87 [0.31] 16,00 [0.63] 6,1 [0.24] 33,02 [1.3] 41,15 [1.62] M5 x 0.8 (male) N/A N/A

RodEndBearings

MALE

FEMALE

Ordercode

Amm[in] Bmm[in] Cmm[in] Ddia.mm[in] Edia.mm[in] Fmm[in] Lmm[in] T Thread Approx.weight(lb)

Staticloadrating(basedon 3:1 load factor)

AA271 6,35 [0.25] 17,45 [0.687] 9,53 [0.375] 19,05 [0.75] 12,5 [0.500] 33,32 [1.312] 42,85 [1.687] ¼-28 UNF 0.05 2300 lb

AA272 9,53 [0.375] 20,62 [0.812] 12,5 [0.500] 25,4 [1.00] 17,45 [0.687] 41,28 [1.625] 53,98 [2.125] 3/8-24 UNF 0.13 3600 lb

AA273 12,5 [0.500] 26,97 [1.062] 15,88 [0.625] 33,32 [1.312] 22,23 [0.875] 53,98 [2.125] 70,64 [2.781] ½-20 UNF 0.29 6300 lb

AA274 19,05 [0.75] 39,67 [1.562] 22,23 [0.875] 44,45 [1.750] 28,58 [1.125] 73,03 [2.875] 95,25 [3.750] ¾-16 UNF 0.63 10000 lb

AW900** 4,98 [0.196] 13,97 [0.55] 7,87 [0.31] 16,00 [0.63] 6,1 [0.24] 26,92 [1.06] 35,05 [1.38] M5 x 0.8 (female) N/A N/A

** The AW900 is a kit containing both male and female displacement transducer rod end bearings.


509

ACCESSORIES


AccelerometerMountingStudsandAdapters

Ordercode

MS028 10-32 UNF to M8

MS036 1/4-28 UNF to M6

MS039 1/4-28 UNF to 10-32 UNF

MS065 10-32 UNF to M6

MS067 1/4-28 UNF to M8

MS068 1/4-28 UNF to 1/4-28 UNF

MS124 1/4-28 UNF to M10

MS132 1/4-28 UNF to M12

Male stud Set screw

Ordercode

MS001 Q/F male to Glue base

MS002 Q/F male to M8 male


MS004 Q/F male to 1/4-28 UNF male

MS005 Q/F male to 1/4-28 UNF female


MS007 Q/F male to 10-32 UNF female

MS008 Q/F male to M8 female

MS010 MA35 Q/F male to Glue base

MS055 MA35 Q/F male to M8 male

MS072 MA35 Q/F male to M6 male

MS106 Q/F male to M10 female

MS117 MA35 Q/F male to 1/4-28 UNF male

Glue type

Ordercode

MS011 1/4-28 UNF to Q/F female

MS013 1/4-28 UNF to Glue base


MS034 1/4-28 UNF to 1/4-28 UNF female

MS061 1/4-28 UNF to 10-32 UNF male


MS093 M6 male to M6 female

MS102 MA35 Q/F female to 10-32 UNF male

Isolated stud

Studsandsetscrews

Quick-fitadapters

Otheradapters

Stud to Q/F female

Ordercode

MM001 1/4-28 UNF male

MM004 10-32 UNF male

MM005 (Uses MS005 adapter)

MM023 1/4-28 UNF female

Magneticadapters

Ordercode

MM008 1/4-28 UNF male

MM009 10-32 UNF male

MM010 (Uses MS005 adapter)

MM013 Quick-fit large thread

Ordercode

AA235 Triaxial mounting block for Model JTF

Mountingblock


510

ACCESSORIES



MiscellaneousAccessories

AA180 Signature calibration module (in-line)

AA926 Bench top/handle (3/8 DIN)

AA928 Panel mount adapter (3/8 DIN)

AA937 Displacement transducer mounting block (dc/dc only)

AA911 Four transducer (maximum) summing junction box

AA912 Set of five mating connectors for AA911 summing junction box

AA921 Explosion-proof enclosure (gage or absolute pressure)AA922 Explosion-proof enclosure (differential pressure)

AA943 Panel mount adapter (1/8 DIN)

AA944 Bench mount kit for 1/8 DIN

AA945 Miniature Displacement transducer mounting block

AA923 GM NEMA-4 splashguard for all DIN

AA924 GM bench mount adapter


511

ACCESSORIES


Pull Plates

Ordercode Calibrationresistance

AA211 59000 ohm for 1.6 mV/V to 3 mV/V output

AA212 90000 ohm for 1 mV/V to 1.5 mV/V output

AA213 200000 ohm for less than 1 mV/V output

ShuntCalibrationResistors

Ordercode Usedwithmodels41and42(range)

Usedwithmodel75(range)

T thread Ddiameter H #boltholes Size Depth

AA221 5 lb to 25 lb N/A 1/4-28 UNF-2B 63,5 mm [2.5 in] 19,05 mm [0.75 in] 6 8-32 12,5 mm [0.5 in]

AA222 50 lb to 1000 lb 50 lb to 500 lb 3/8-24 UNF-2B 76,2 mm [3.00 in] 25,4 mm [1.00 in] 6 1/4-28 12,5 mm [0.5 in]

AA223 2K lb to 5 K lb 1K lb to 2K lb 1/2-20 UNF 88,9 mm [3.50 in] 25,4 mm [1.00 in] 6 5/16-24 12,5 mm [0.5 in]

AA224 7500 lb to 15K lb 3K lb to 7500 lb 1-14 UNS 137,9 [5.50 in] 38,1 mm [1.50 in] 8 3/8-24 19,05 mm [0.75 in]

AA225 20K lb to 50K lb 10K lb to 20K lb 1½-12 UNF 152,4 [6.00 in] 45,72 mm [1.80 in] 8 1/2-13 25,4 mm [1.0 in]

AA233 N/A 30K lb to 50K lb 2-12 UNC 190,5 mm [7.50 in] 63,5 mm [2.50 in] 8 3/4-16 44,45 mm [1.75 in]

AA234 N/A 75K lb to 100K lb 2½-12 UNC 228,6 mm [9.00 in] 76,2 mm [3.00 in] 12 5/8-18 25,4 mm [1.0 in]

AA226 75K lb to 100K lb N/A 2-12 UNC 228,6 mm [9.00 in] 76,2 mm [3.00 in] 12 5/8-18 25,4 mm [1.0 in]

AA227 150K lb to 200K lb N/A 2½-12 UN 279,4 mm [11.00 in] 88,9 mm [3.50 in] 12 3/4-16 25,4 mm [1.0 in]

AA228 300K lb to 500K lb 150K lb to 200K lb 3½-8 355,6 mm [14.00 in] 107,95 mm [4.25 in] 12 1-8 57,15 mm [2.25 in]

NOTE: Mounting bolts included with pull plates

PressurePortAdapters

Ordercode(Stainlesssteel)

PressureportA Pressure port B

AA310 9/16-18 UNF male 1/4-18 NPT male

AA311 1/4-18 NPT female 1/8-27 NPT female

AA312 1/4-18 NPT female 7/16-20 UNF female (MS33649-04)

AA313 1/4-18 NPT female 7/16-20 UNF male (MS33656-E4)

AA314 1/4-18 NPT male 1/8-27 NPT female

AA315 1/4-18 NPT male 7/16-20 UNF female (MS33649-04)

AA316 1/4-18 NPT male 7/16-20 UNF male (MS33656-E4)


AA318* 1/4-18 NPT male 1/4-18 NPT male


AA333 1/8-27 NPT male 1/8-27 NPT male

AA334 1/8-27 NPT female 7/16-20 UNF male (MS33656-E4)


AA336 1/8-27 NPT male 1/4-18 NPT male

AA337 1/4 BSP female 1/4-18 NPT male


* Maximum pressure range is 6000 psi.The pressure ports indicated describe the adapter, which may be installed in either direction.

Port A

Port B

Adapter

Ordercode Description

AA946 Domed tip

AA947 Rolling tip

DisplacementTransducerTips


TMS 9000 Rotary How to order: Torque Measurement System

Documents

Transcript of TMS 9000 Rotary How to order: Torque Measurement System