TM640 ALARMS, TRENDS AND DIAGNOSTICS. Alarm system Trend systemDiagnostics Summary Alarms, Trends...
-
Upload
ginger-sims -
Category
Documents
-
view
239 -
download
4
Transcript of TM640 ALARMS, TRENDS AND DIAGNOSTICS. Alarm system Trend systemDiagnostics Summary Alarms, Trends...
TM640
ALARMS, TRENDS AND DIAGNOSTICS
Alarm system
Trend system
Diagnostics
Summary
Alarms, Trends and Diagnostics
Diagnostics
Various methods for assigning URLs
Linking the HTML control to a text group
Linking the HTML control to a text group
URLs for displaying the SDM
Panel size HTMLView size URL
QVGA 316 x 191 http://127.0.0.1/sdm-qvga/qvga.cgi
VGA 620 x 339 http://127.0.0.1/sdm-vga/vga.cgi
XGA 1004 x 567 http://127.0.0.1/sdm-xga/xga.cgi
Alarm system
Trend system
Diagnostics
Summary
Alarms, Trends and Diagnostics
Trend system
Trend control components
Trend curves
Time axis
Measurement cursor
Axis labels
Value axis
Trend container
Creating the trend control
Trend Wizard
Online trend
Data point values
are displayed over time
value = 204060
Setting the time range and sampling rate
Duration
Displayed time range
In this example:
Duration [s]: 90 => 01:30 min
Sampling rate
Sampling rate – specifies the
intervals at which the value is sampled
and displayed
Setting the recording mode
Single
A specific duration
is recorded
Continuous
Time axis is continuous
Current trend values always displayed
02:60
Trend types
User trend
Values from an array
are read and displayed
trend_array = { 20 , 40 , 60 }
50 ms 100 ms 150 ms
Displaying curves in the trend control
Channels
Specifies how many trend curves
are displayed in the control
Linking trend curves with the logic
Trend data
For each trend curve
assign a data point
and color
Linking trend curves with the logic
Linking trend curves with the logic
Appearance
GridGrid and color settings
ScalesColor settings
Configuring the measurement cursor
Trend data properties
Trend data properties
Trend components
Trend data assignments
Alarm system
Trend system
Diagnostics
Summary
Alarms, Trends and Diagnostics
Alarm system
Alarm configuration
Display
Alarm text
Status messages
Error states
Acknowledgement
Everything at a glance
Clearly organized
Bitmaps
Alarm groups
Message type - Acknowledgment requirements
Messages
Operating statesAcknowledgment not required
Non-critical
Warnings
Error states
Acknowledgment preferred
No action required
Alarms
Critical error states
Acknowledgment required
Action necessary
Linking the alarm group with the logic
Effect of the logic on the alarm system
alarmCoffee [ 0 ] = 1
0 00000
0 1 2 3 4 5
0 00001 1 00000 0 00100
24
Alarm control configuration
Alarm lists
CurrentActive and
inactive unacknowledged
HistoryPossible to set which event
is recorded
ConfigurationAlarms from all groups except
group alarms
Alarms can only be bypassed here
ActiveActive unacknowledged alarms
Display configuration
Display configuration
Alarm map - Current
Alarmtext1
Alarm list
Alarmtext5
0 0 0 0 0 0 0 0
0 0 0 00010
0 1 0 00010
0 1 0 00000
0 1 2 3 4 5 6 7
Alarm map - History
Alarmtext1 T
Alarm history
Alarmtext5 T
0 0 0 0 0 0 0 0
0 0 0 00010
0 1 0 00010
0 1 0 00000
0 1 2 3 4 5 6 7
Alarmtext1 R
Alarm system
Trend system
Diagnostics
Summary
Alarms, Trends and Diagnostics
Summary
ASIV ALARMS, TRENDS AND DIAGNOSTICSTM640
TM600Introduction to Visualization
TM610Working with Integrated Visualization
TM640Alarm, Trends and Diagnostics
TM670Advanced Visual Components