TIÊU CHUẨN MỚI THÁNG...
Transcript of TIÊU CHUẨN MỚI THÁNG...
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 11/2017 1/41
`
TIÊU CHUẨN MỚI THÁNG 11/2017
Trong tháng 11/2017, Trung tâm Thông tin và Thống kê Khoa học và Công nghệ xin gởi đến Quý vị Danh mục tiêu chuẩn mới được phân lĩnh vực như sau:
TIÊU CHUẨN NƯỚC NGOÀI ................................................................................. 3
Vi sinh vật thực phẩm - Ngũ cốc ............................................................................ 3
Phương pháp thử và phân tích chung đối với thực phẩm ......................................... 3
Máy móc, dụng cụ và thiết bị nông nghiệp .............................................................. 3
Nông nghiệp (Nhà kính; Thuốc bảo vệ thực vật)…………………………………..3
Thuốc lá ................................................................................................................... 3
Công nghệ hóa chất .................................................................................................. 4
Dầu mỏ và các công nghệ liên quan ......................................................................... 4
Công nghệ nano ....................................................................................................... 5
Cao su ...................................................................................................................... 5
Chất dẻo; Chất kết dính ............................................................................................ 6
Phụ tùng đường ống và đường ống (Ống nhựa; Ống bằng gang-thép) ..................... 6
Hệ thống và kết cấu chất lỏng (Van) ........................................................................ 7
Hệ thống và kết cấu chất lỏng (Hệ thống truyền dẫn chất lỏng; Thiết bị chứa chất
lỏng) ......................................................................................................................... 8
Quạt ......................................................................................................................... 8
Năng lượng và truyền nhiệt (Năng lượng mặt trời) .................................................. 8
Năng lượng và truyền nhiệt (Thu hồi nhiệt, động cơ đốt trong, Công nghệ làm lạnh,
nồi hơi) ..................................................................................................................... 8
Khai thác mỏ và khoáng sản (Thiết bị xử lý khoáng sản) ........................................ 9
Phương tiên giao thông đường bộ - Vận tải ............................................................. 9
Đường sắt ............................................................................................................... 10
Đóng tàu và Kết cấu tàu thủy ................................................................................. 10
Kỹ thuật máy bay và tàu vũ trụ .............................................................................. 10
Liên hệ: Phòng Cung cấp Thông tin
ĐC: 79 Trương Định, Quận 1, TP.HCM
ĐT: 38243826 - 38297040 (102-203) - Fax: 38291957
Website: www.cesti.gov.vn - Email: [email protected]
TRUNG TÂM THÔNG TIN VÀ THỐNG KÊ
KHOA HỌC VÀ CÔNG NGHỆ
SỞ KHOA HỌC VÀ CÔNG NGHỆ TP.HCM
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 11/2017 2/41
Chế tạo (Hệ thống tự động hóa công nghiệp – Lò công nghiệp) ............................ 15
Chế tạo (Hàn đồng và hàn thiếc; Hệ thống máy công cụ) ...................................... 15
Chế tạo (Thiết bị làm việc không phoi; Dụng cụ cầm tay) ..................................... 15
Chế tạo (Xử lý bề mặt và mạ) ................................................................................ 16
Hệ thống và kết cấu cơ khí (Ổ đỡ; Chi tiết lắp xiết) ............................................... 18
Hệ thống và kết cấu cơ khí (Dẫn động và truyền động mềm; Bánh răng) ............. 18
Thiết bị xếp dỡ vật liệu (Cần trục; Thiết bị nâng) .................................................. 18
Thiết bị xếp dỡ vật liệu (Máy làm đất) ................................................................... 19
Luyện kim (Luyện kim bột, kim loại màu) ............................................................ 19
Luyện kim (Kim loại đen; Sản phẩm sắt và thép) .................................................. 21
Luyện kim (Thử nghiệm kim loại; Ăn mòn kim loại) ............................................ 23
Điện tử - Thiết bị điện tử ........................................................................................ 23
Kỹ thuật điện .......................................................................................................... 24
Công nghệ ảnh ....................................................................................................... 25
Công nghệ thông tin và ứng dụng .......................................................................... 26
Viễn thông. Kỹ thuật âm thanh và hình ảnh ........................................................... 28
Vật liệu xây dựng và Xây dựng nhà ....................................................................... 29
Xây dựng nhà (Âm học trong xây dựng) ............................................................... 30
Xây dựng dân dụng (Hệ thống nước cống bên ngoài, Kỹ thuật làm đường) .......... 31
Công nghệ chế biến gỗ ........................................................................................... 31
Sơn và vecni ........................................................................................................... 32
Công nghiệp dệt may (Vải tráng phủ; Vật liệu dệt, Xơ dệt) ................................... 32
May mặc ................................................................................................................ 32
Vật liệu gia cố phức hợp; Giấy và cactông ............................................................ 33
Thủy tinh và gốm (Thủy tinh, vật liệu chịu lửa) ................................................... 33
Công nghệ chăm sóc sức khỏe (Nha khoa; Thiết bị y tế) ....................................... 33
Công nghệ chăm sóc sức khỏe (Tiệt khuẩn và khử trùng) ..................................... 35
Công nghệ chăm sóc sức khỏe (Y học thí nghiệm) ................................................ 36
Thiết bị gia dụng – Giải trí - Thiết bị thể thao ........................................................ 36
Bảo vệ sức khỏe. An toàn (Tiếng ồn đối với con người) ...................................... 37
Môi trường. Bảo vệ sức khỏe. An toàn (Ghi nhãn sinh thái, Vòng đời sản phẩm) 37
Môi trường. Bảo vệ sức khỏe. An toàn (Phòng cháy, Phòng nổ) ........................... 37
Môi trường. Bảo vệ sức khỏe. An toàn (Thiết bị bảo vệ, An toàn trong gia đình) . 38
Môi trường. Bảo vệ sức khỏe. An toàn (Công thái học) ........................................ 38
Môi trường (Chất lượng không khí) ....................................................................... 38
Môi trường (Chất lượng đất ; Chất lượng nước) .................................................... 39
Đo lường và phép đo (Đo tuyến tính và đo góc) .................................................... 39
Đo lường và phép đo (Dụng cụ đo nhiệt độ) .......................................................... 39
Âm học và phép đo âm .......................................................................................... 40
Thử nghiệm (Thử nghiệm môi trường; Phân tích cỡ hạt) ...................................... 40
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 11/2017 3/41
Dịch vụ. Tổ chức, quản lý và chất lượng công ty (Quản lý chất lượng và đảm bảo
chất lượng)………………………………………………………………………40
Bao gói và phân phối hàng hóa (vận chuyển hàng hóa, Chai- lọ) .......................... 40
Từ vựng (Thiết bị vận chuyển vật liệu) .................................................................. 41
Ký hiệu đồ họa ....................................................................................................... 41
Tài liệu sản phẩm kỹ thuật ..................................................................................... 41
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
TIÊU CHUẨN NƯỚC NGOÀI
Vi sinh vật thực phẩm - Ngũ cốc Trở về đầu trang
1 DIN 10355 Milled cereal products - requirements, types and
testing
8
2 EN ISO 11133/FprA1 Microbiology of food, animal feed and water -
Preparation, production, storage and performance
testing of culture media - Amendment 1 (ISO
11133:2014/FDAM 1:2017)
1
Phương pháp thử và phân tích chung đối với thực phẩm Trở về đầu trang
3 FprEN 15662 Foods of plant origin - Multimethod for the
determination of pesticide residues using GC- and
LC-based analysis following acetonitrile
extraction/partitioning and clean-up by dispersive
SPE - Modular QuEChERS-method
81
Máy móc, dụng cụ và thiết bị nông nghiệp Trở về đầu trang
4 EN 15695-1 Agricultural tractors and self-propelled sprayers -
Protection of the operator (driver) against hazardous
substances - Part 1: Cab classification, requirements
and test procedures
29
5 EN 15695-2 Agricultural tractors and self-propelled sprayers -
Protection of the operator (driver) against hazardous
substances - Part 2: Filters, requirements and test
procedures
9
6 ISO 5395-1 FDAM 1 Garden equipment - Safety requirements for
combustion-engine-powered lawnmowers - Part 1:
Terminology and common tests - Amendment 1:
Annex G (Vibration test code - Hand-arm vibration
and Whole-body vibration)
9
7 ISO/FDIS 11783-1 Tractors and machinery for agriculture and forestry
- Serial control and communications data network -
Part 1: General standard for mobile data
communication
19
Thuốc lá Trở về đầu trang
8 ISO 1750 FDAM 6 Pesticides and other agrochemicals - Common
names - Amendment 6: Meptyldinocap
1
9 ISO 4387 AMD 2 Cigarettes - Determination of total and nicotine-free
dry particulate matter using a routine analytical
1
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 11/2017 4/41
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
smoking machine; Amendment 2
10 ISO/DIS 7210 Routine analytical cigarette-smoking machine -
Additional test methods for machine verification
9
11 prEN 13031-1 Greenhouses: Design and Construction - Part 1:
Commercial production greenhouses
92
Công nghệ hóa chất Trở về đầu trang
12 ASTM D2268-93(2017)
Replaces: ASTM D2268-
93(2013)
Standard Test Method for Analysis of High-Purity
n-Heptane and Isooctane by Capillary Gas
Chromatography
4
13 DIN 55982 Pigments - Determination of lightening power of
white pigments according to the paste method
14
14 EN 13639 Determination of total organic carbon in limestone 27
15 FprEN 16785-2 Bio-based products - Bio-based content - Part 2:
Determination of the bio-based content using the
material balance method
14
16 JIS K 0147-1 Surface chemical analysis - Vocabulary - Part 1:
General terms and terms used in spectroscopy
17 JIS K 0147-2 Surface chemical analysis - Vocabulary - Part 2:
Terms used in scanning-probe microscopy
18 JIS K 0154 Surface chemical analysis - Guidelines for
preparation and mounting of specimens for analysis
19 JIS K 4822/AMENDMENT
1
Reagents for stability tests of explosives
(Amendment 1)
6
20 JIS K 8322/ERRATUM 1 Chloroform; ERRATUM 1
21 prEN ISO 6145-7 Gas analysis - Preparation of calibration gas
mixtures using dynamic methods - Part 7: Thermal
mass-flow controllers (ISO/DIS 6145-7:2017)
1
Dầu mỏ và các công nghệ liên quan Trở về đầu trang
22 ASTM D1840-07(2017)
Replaces: ASTM D1840-
07(2013)
Standard Test Method for Naphthalene
Hydrocarbons in Aviation Turbine Fuels by
Ultraviolet Spectrophotometry
4
23 DIN EN 12817 LPG Equipment and accessories - Inspection and
requalification of LPG pressure vessels up to and
including 13 m3; German and English version prEN
12817:2017
72
24 DIN EN 12819 LPG equipment and accessories - Inspection and
requalification of LPG pressure vessels greater than
13 m3; German and English version prEN
12819:2017
64
25 DIN EN 13175 LPG Equipment and accessories - Specification and
testing for Liquefied Petroleum Gas (LPG) pressure
vessel valves and fittings; German and English
version prEN 13175:2017
102
26 DIN EN 589 Automotive fuels - LPG - Requirements and test 37
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 11/2017 5/41
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
methods; German and English version prEN
589:2017
27 EN 12697-3/prA1 Bituminous mixtures - Test methods - Part 3:
Bitumen recovery: Rotary evaporator
6
28 EN 13303 Bitumen and bituminous binders - Determination of
the loss in mass after heating of industrial bitumen
11
29 EN 16728/prA1 LPG equipment and accessories - Transportable
refillable LPG cylinders other than traditional
welded and brazed steel cylinders - Periodic
inspection
6
30 FprEN ISO 16380 Road vehicles - Blended fuels refuelling connector
(ISO 16380:2014/Amd 1:2016)
1
31 ISO 11365 Petroleum and related products - Requirements and
guidance for the maintenance of triaryl phosphate
ester turbine control fluids
20
32 ISO 13623 Petroleum and natural gas industries - Pipeline
transportation systems
84
33 ISO 3183 FDAM 1 Petroleum and natural gas industries - Steel pipe for
pipeline transportation systems; Amendment 1
16
34 ISO/DIS 12156-1 Diesel fuel - Assessment of lubricity using the high-
frequency reciprocating rig (HFRR) - Part 1: Test
method
14
35 prEN 12697-30 Bituminous mixtures - Test methods for hot mix
asphalt - Part 30: Specimen preparation by impact
compactor
24
36 prEN 12697-44 Bituminous mixtures - Test methods for hot mix
asphalt - Part 44: Crack propagation by semi-
circular bending test
15
37 prEN 12697-5 Bituminous mixtures - Test methods - Part 5:
Determination of the maximum density
23
38 prEN ISO 6974-3 Natural gas - Determination of composition and
associated uncertainty by gas chromatography - Part
3: Precision and bias (ISO/DIS 6974-3:2017)
1
Công nghệ nano Trở về đầu trang
39 TS Z 0030-1 Nanotechnologies - Vocabulary - Part 1: Core terms 6
40 TS Z 0030-2 Nanotechnologies - Vocabulary - Part 2: Nano-
objects
12
Cao su Trở về đầu trang
41 ASTM E1136-17 Replaces:
ASTM E1136-14
Standard Specification for P195/75R14 Radial
Standard Reference Test Tire
5
42 ISO 4649 Rubber, vulcanized or thermoplastic -
Determination of abrasion resistance using a
rotating cylindrical drum device
21
43 JIS K 6251/ERRATUM 1 Rubber, vulcanized or thermoplastic - 1
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 11/2017 6/41
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
Determination of tensile stress-strain properties;
ERRATUM
Chất dẻo; Chất kết dính Trở về đầu trang
44 ASTM D1779-98(2017)
Replaces: ASTM D1779-
98(2011)
Standard Specification for Adhesive for Acoustical
Materials
3
45 ASTM D1995-92(2017)
Replaces: ASTM D1995-
92(2011)
Standard Test Methods for Multi-Modal Strength
Testing of Autohesives (Contact Adhesives)
13
46 DIN 54460 Construction adhesives - Tensile peel test of elastic
adhesive bonds
13
47 DIN EN 302-2 Adhesives for load-bearing timber structures - Test
methods - Part 2: Determination of resistance to
delamination; German version EN 302-2:2017
16
48 DIN EN 302-3 Adhesives for load-bearing timber structures - Test
methods - Part 3: Determination of the effect of acid
damage to wood fibres by temperature and humidity
cycling on the transverse tensile strength; German
version EN 302-3:2017
14
49 EN 302-2 Adhesives for load-bearing timber structures - Test
methods - Part 2: Determination of resistance to
delamination
14
50 EN 302-3 Adhesives for load-bearing timber structures - Test
methods - Part 3: Determination of the effect of acid
damage to wood fibres by temperature and humidity
cycling on the transverse tensile strength
12
51 FprEN 13207 Plastics - Thermoplastic silage films and tubes for
use in agriculture
20
52 FprEN 13655 Plastics - Thermoplastic mulch films recoverable
after use, for use in agriculture and horticulture
31
53 FprEN 477 Plastics - Poly(vinyl chloride) (PVC) based profiles
- Determination of the resistance to impact of
profiles by falling mass
7
54 FprEN 478 Plastics - Poly(vinyl chloride) (PVC) based profiles
- Determination of the appearance after exposure at
150 °C
5
55 FprEN 479 Plastics - Poly(vinyl chloride) (PVC) based profiles
- Determination of heat reversion
6
56 FprEN 514 Plastics - Poly(vinyl chloride) (PVC) based profiles
- Determination of the strength of welded corners
and T-joints
14
Phụ tùng đường ống và đường ống (Ống nhựa; Ống bằng gang-thép) Trở về đầu trang
57 ASTM C1644 -06(2017)
Replaces: ASTM C1644-
06(2011)
Standard Specification for Resilient Connectors
Between Reinforced Concrete On-Site Wastewater
Tanks and Pipes
5
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 11/2017 7/41
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
58 DIN 2459 Inseparable elastomer sealed connectors made of
metal for metallic pipes for use in drinking water
system installation - General requirements and test
methods
20
59 DIN 87721-2 Drain screws - Part 2: Screws, welding plates 8
60 DIN EN 1519-1 Plastics piping systems for soil and waste discharge
(low and high temperature) within the building
structure - Polyethylene (PE) - Part 1: Requirements
for pipes, fittings and the system; German and
English version prEN 1519-1:2017
74
61 DIN EN 598 Coated and lined ductile iron pipes, fittings and
their joints for sewerage and drainage applications -
Products characteristics and test and assessment
methods; German and English version prEN
598:2017
155
62 ISO/DIS 19469-1 Plastic piping systems for non pressure
underground drainage - Single wall corrugated
piping systems of polyethylene (PE) and
polypropylene (PP) - Part 1: General requirements
and performance characteristics
24
63 ISO/DIS 19469-3 Plastic piping systems for non pressure
underground drainage - Single wall corrugated
piping systems of polyethylene (PE) and
polypropylene (PP) - Part 3: Pipes and fittings
28
64 JIS B 2316 Steel socket-welding pipe fittings 24
65 JIS G 3446 Stainless steel tubes for machine and structural
purposes
20
66 prEN 1295-1 Structural design of buried pipelines under various
conditions of loading - Part 1: General requirements
32
Hệ thống và kết cấu chất lỏng (Van) Trở về đầu trang
67 DIN 3280-1 Valves for domestic water supply PN 10 - Metallic
tapered unions - Part 1: Design
9
68 DIN 3280-2 Valves for domestic water supply PN 10 - Metallic
tapered unions - Part 2: Tubes and sleeves
12
69 DIN 7588-1 Valves for domestic water supply PN 10 - Metallic
flat sealing unions - Part 1: Design
14
70 DIN 7588-2 Valves for domestic water supply PN 10 - Metallic
flat sealing unions - Part 2: Tubes and sleeves
17
71 DIN 86252 Non-return valves for shipboard use, cut-off type, of
cast iron, with flanges, DN 15 to DN 500
16
72 DIN EN 13611 Safety and control devices for burners and
appliances burning gaseous and/or liquid fuels -
General requirements; German and English version
prEN 13611:2017
320
73 FprEN 736-1 Valves - Terminology - Part 1: Definition of types 10
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 11/2017 8/41
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
of valves
74 JIS B 2061 Faucets, ball taps and flush valves 84
Hệ thống và kết cấu chất lỏng (Hệ thống truyền dẫn chất lỏng; Thiết bị chứa chất lỏng)
Trở về đầu trang
75 DIN 20066 Hydraulic fluid power - Hose assemblies -
Dimensions, requirements
28
76 DIN EN 13445-2/A6 Unfired pressure vessels - Part 2: Materials;
German and English version EN 13445-
2:2014/prA6:2017
10
77 DIN EN 13445-3/A3 Unfired pressure vessels - Part 3: Design; German
version EN 13445-3:2014/A3:2017
27
78 JIS B 8356-1 Hydraulic fluid power - Filters - Evaluation of filter
performance - Part 1: Filter elements - Procedure
for verifying performance characteristics
8
79 KS B 6452 Hydraulic breakers 41
80 KS B ISO 21009-2 Cryogenic vessels-Static vacuum insulated
vessels-Part 2:Operational requirements
25
81 KS B ISO 21028-1 Cryogenic vessels-Toughness requirements for
material at cryogenic temperature-Part
1:Temperatures below-80 ℃
11
82 KS B ISO 21029-2 Cryogenic vessels . Transportable vacuum insulated
vessels of not more than 1 000 litres volume . Part
2: Operational requirements
26
83 KS B ISO 24490 Cryogenic vessels-Pumps for cryogenic service 23
Quạt Trở về đầu trang
84 ISO 5801 Fans - Performance testing using standardized
airways
136
Năng lượng và truyền nhiệt (Năng lượng mặt trời) Trở về đầu trang
85 ISO 9806 Solar energy - Solar thermal collectors - Test
methods
90
86 JIS C 8904-9 Photovoltaic devices - Part 9: Solar simulator
performance requirements
24
87 JIS C 8904-10 Photovoltaic devices - Part 10: Methods of linearity
measurement
12
88 JIS C 8930 Salt mist corrosion testing of photovoltaic (PV)
modules
14
Năng lượng và truyền nhiệt (Thu hồi nhiệt, động cơ đốt trong, Công nghệ làm lạnh,
nồi hơi) Trở về đầu trang
89 ASTM C1134-17 Replaces:
ASTM C1134-90(2012)e1
Standard Test Method for Water Retention of Rigid
Thermal Insulations Following Partial Immersion
6
90 DIN EN 13771-2 Compressors and condensing units for refrigeration
- Performance testing and test methods - Part 2:
Condensing units; German version EN 13771-
31
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 11/2017 9/41
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
2:2017
91 EN 13771-2 Compressors and condensing units for refrigeration
- Performance testing and test methods - Part 2:
Condensing units
30
92 FprEN 12953-4 Shell boilers - Part 4: Workmanship and
construction of pressure parts of the boiler
33
93 JIS D 1611-3 Automotive parts - Lubricating oil filters for
internal combustion engines - Part 3: Tests for
composite filter housings
26
Khai thác mỏ và khoáng sản (Thiết bị xử lý khoáng sản ) Trở về đầu trang
94 DIN EN 1009-1 Machines for mechanical processing of minerals
and similar solid materials - Safety - Part 1:
Common requirements for partly completed
machinery and processing plants; German and
English version prEN 1009-1:2017
152
95 DIN EN 1009-2 Machines for mechanical processing of minerals
and similar solid materials - Safety - Part 2: Specific
requirements for feeding machinery and continuous
handling equipment; German and English version
prEN 1009-2:2017
48
96 DIN EN 1009-3 Machines for mechanical processing of minerals
and similar solid materials - Safety - Part 3: Specific
requirements for crushing and milling machinery;
German and English version prEN 1009-3:2017
58
97 DIN EN 1009-4 Machines for mechanical processing of minerals
and similar solid materials - Safety - Part 4: Specific
requirements for screening machinery; German and
English version prEN 1009-4:2017
64
98 DIN EN 1009-5 Machines for mechanical processing of minerals
and similar solid materials - Safety - Part 5: Specific
requirements for cleaning, recycling, sorting and
mud treatment machinery; German and English
version prEN 1009-5:2017
79
Phương tiên giao thông đường bộ - Vận tải Trở về đầu trang
99 CEN/TR 17143 Intelligent transport systems - Standards and actions
necessary to enable urban infrastructure
coordination to support Urban-ITS
639
100 EN 15194 Cycles - Electrically power assisted cycles - EPAC
Bicycles
135
101 FprEN 1645-1 Leisure accommodation vehicles - Caravans - Part
1: Habitation requirements relating to health and
safety
51
102 FprEN 1646-1 Leisure accommodation vehicles - Motor caravans -
Part 1: Habitation requirements relating to health
and safety
41
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 11/2017 10/41
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
103 FprEN 1647 Leisure accommodation vehicles - Caravan holiday
homes - Habitation requirements relating to health
and safety
42
104 JIS D 4220/ERRATUM 1 ERRATUM 1
Đường sắt Trở về đầu trang
105 DIN EN 12080 Railway applications - Axleboxes - Rolling
bearings; German version EN 12080:2017
53
106 DIN EN 12081 Railway applications - Axleboxes - Lubricating
greases; German version EN 12081:2017
22
107 EN 12080 Railway applications - Axleboxes - Rolling
bearings
50
108 EN 12081 Railway applications - Axleboxes - Lubricating
greases
19
109 EN 12082 Railway applications - Axleboxes - Performance
testing
46
110 EN 16922 Railway applications - Ground based services -
Vehicle waste water discharge equipment
24
111 prEN 14752 Railway applications - Bodyside entrance systems
for rolling stock
83
112 prEN 15153-1 Railway applications - External visible and audible
warning devices - Part 1: Head, marker and tail
lamps for mainline rail
23
113 prEN 15153-2 Railway applications - External visible and audible
warning devices - Part 2: Warning horns for
mainline rail
18
114 prEN 15153-3 Railway applications - External visible and audible
warning devices - Part 3: External visible warning
devices for urban rail
20
115 prEN 15153-4 Railway applications - External visible and audible
warning devices - Part 4: Warning horns for urban
rail
12
116 prEN 15610 Railway applications - Acoustics - Rail and wheel
roughness measurement related to rolling noise
generation
35
Đóng tàu và Kết cấu tàu thủy Trở về đầu trang
117 prEN ISO 8099-1 Small craft - Waste systems - Part 1: Waste water
retention (ISO/FDIS 8099-1:2017)
1
Kỹ thuật máy bay và tàu vũ trụ Trở về đầu trang
118 ASTM F3180/F3180M-17
Replaces: ASTM
F3180/F3180M-16
Standard Specification for Low-Speed Flight
Characteristics of Aircraft
4
119 DIN 65124 Aerospace series - Technical Specifications for
additive manufacturing of metallic materials with
16
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 11/2017 11/41
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
the powder bed process
120 DIN EN 2899 Aerospace series - Vulcanized rubbers - Test on the
susceptibility to corrosion in a damp atmosphere of
metals in contact with vulcanized rubbers; German
and English version FprEN 2899:2017
21
121 DIN EN 3660-031 Aerospace series - Cable outlet accessories for
circular and rectangular electrical and optical
connectors - Part 031: Cable outlet, style K,
straight, for heat shrinkable boot, shielded, sealed -
Product standard; German and English version EN
3660-031:2017
36
122 DIN EN 3660-032 Aerospace series - Cable outlet accessories for
circular and rectangular electrical and optical
connectors - Part 032: Cable outlet, style K,
straight, for heat shrinkable boot, shielded, sealed -
Product standard; German and English version EN
3660-032:2017
39
123 DIN EN 3660-034 Aerospace series - Cable outlet accessories for
circular and rectangular electrical and optical
connectors - Part 034: Memory metal rings, style Z,
for the attachment of screens - Product standard;
German and English version EN 3660-034:2017
18
124 DIN EN 3660-035 Aerospace series - Cable outlet accessories for
circular and rectangular electrical and optical
connectors - Part 035: Cable outlet, style K, 90°, for
heat shrinkable boot, shielded, sealed - Product
standard; German and English version EN 3660-
035:2017
38
125 DIN EN 3660-066 Aerospace series - Cable outlet accessories for
circular and rectangular electrical and optical
connectors - Part 066: Cable outlet, style K, 90°, for
heat shrinkable boot, shielded, sealed - Product
standard; German and English version EN 3660-
066:2017
38
126 DIN EN 3745-505 Aerospace series - Fibres and cables, optical,
aircraft use - Test methods - Part 505: Cable tensile
strength; German and English version FprEN 3745-
505:2017
13
127 DIN EN 4729 Aerospace series - Trivalent chromium based
chemical conversion coatings for aluminium and
aluminium alloys; German and English version EN
4729:2017
29
128 DIN EN 4832 Aerospace series - Adaptor, Pipe coupling 24° Cone
up to 35000 kPa (5080 psi) Ring-locked fitting and
Ring-locked fitting-reducer - Inch Series -
Technical specification; German and English
57
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 11/2017 12/41
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
version FprEN 4832:2017
129 DIN EN 4833 Aerospace series - Pipe coupling 24° Cone up to
35000 kPa (5080 psi) Ring-locked fitting- Flareless
End - Inch Series - Extra Fine Thread Pitch;
German and English version FprEN 4833:2017
30
130 DIN EN 4834 Aerospace series - Adaptor, Pipe coupling 24° Cone
up to 35000 kPa (5080 psi) Port for Ring locked
fitting - Inch Series - Geometric configuration;
German and English version FprEN 4834:2017
22
131 DIN EN 4835 Aerospace series - Installation and removal
requirements for Ring locked fitting and reducer,
24° Cone up to 35000 kPa (5 080psi) - Inch Series;
German and English version FprEN 4835:2017
37
132 DIN EN 4836 Aerospace series - Adaptor, Pipe coupling 24° Cone
up to 35000 kPa (5080 psi) Ring-locked fitting
Reducer - Flareless End - Inch Series - Extra Fine
Thread Pitch; German and English version FprEN
4836:2017
30
133 DIN EN 4838-001 Aerospace series - Arc Fault Circuit breakers,
single-pole, temperature compensated, rated
currents 3 A to 25 A - 115 V a.c. 400 Hz Constant
Frequency - Part 001: Technical specification;
German and English version FprEN 4838-001:2017
45
134 DIN EN 6128 Aerospace series - Blind bolt, 100° flush head, high
strength; German and English version FprEN
6128:2017
31
135 DIN EN 9136 Aerospace series - Root cause analysis and problem
solving (9S Methodology); German and English
version FprEN 9136:2017
117
136 DIN EN 9300-100 Aerospace series - LOTAR -LOng Term Archiving
and Retrieval of digital technical product
documentation such as 3D, CAD and PDM data -
Part 100: Common concepts for Long term
archiving and retrieval of CAD 3D mechanical
information; German and English version FprEN
9300-100:2017
116
137 DIN EN 9300-110 Aerospace series - LOTAR - Long Term Archiving
and Retrieval of digital technical product
documentation such as 3D, CAD and PDM data -
Part 110: CAD mechanical 3D Explicit geometry
information; German and English version FprEN
9300-110:2017
88
138 DIN EN 9300-115 Aerospace series - LOTAR - Long Term Archiving
and Retrieval of digital technical product
documentation such as 3D, CAD and PDM data -
Part 115: Explicit CAD assembly structure; German
44
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 11/2017 13/41
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
and English version FprEN 9300-115:2017
139 EN 16603-70-41 Space engineering - Telemetry and telecommand
packet utilization
641
140 EN 3660-031 Aerospace series - Cable outlet accessories for
circular and rectangular electrical and optical
connectors - Part 031: Cable outlet, style K,
straight, for heat shrinkable boot, shielded, sealed -
Product standard
18
141 EN 3660-032 Aerospace series - Cable outlet accessories for
circular and rectangular electrical and optical
connectors - Part 032: Cable outlet, style K,
straight, for heat shrinkable boot, shielded, sealed -
Product standard
19
142 EN 3660-034 Aerospace series - Cable outlet accessories for
circular and rectangular electrical and optical
connectors - Part 034: Memory metal rings, style Z,
for the attachment of screens - Product standard
8
143 EN 3660-035 Aerospace series - Cable outlet accessories for
circular and rectangular electrical and optical
connectors - Part 035: Cable outlet, style K, 90°, for
heat shrinkable boot, shielded, sealed - Product
standard
18
144 EN 3660-066 Aerospace series - Cable outlet accessories for
circular and rectangular electrical and optical
connectors - Part 066: Cable outlet, style K, 90°, for
heat shrinkable boot, shielded, sealed - Product
standard
18
145 EN 4008-004 Aerospace series - Elements of electrical and optical
connection - Crimping tools and associated
accessories - Part 004: Die for crimping tool
M22520/5-01 - Product standard
7
146 EN 4165-001/AC Aerospace series - Connectors, electrical,
rectangular, modular - Operating temperature 175
°C continuous - Part 001: Technical specification
2
147 EN 4695 Aerospace series - Tie Rod with integrated bolts -
Assembly Code G, H and K
19
148 EN 4702-02 Aerospace series - Quick release fastening systems
for non-structural and lining applications - Part 02:
Spring clamp stud combination
6
149 EN 4702-03 Aerospace series - Quick release fastening systems
for non-structural and lining applications - Part 03:
Stud - quick-release and locking
13
150 EN 4702-04 Aerospace series - Quick release fastening systems
for non-structural and lining applications - Part 04:
Spring clamp
8
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 11/2017 14/41
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
151 EN 4702-05 Aerospace series - Quick release fastening systems
for non-structural and lining applications - Part 05:
Retaining washer
11
152 EN 4729 Aerospace series - Trivalent chromium based
chemical conversion coatings for aluminium and
aluminium alloys
13
153 EN 6128 Aerospace series - Blind bolt, 100° flush head, high
strength
14
154 EN 9117 Aerospace series - Delegated Product Release
Verification
12
155 EN 9300-005 Aerospace series - LOTAR - LOng Term Archiving
and Retrieval of digital technical product
documentation such as 3D, CAD and PDM data -
Part 005: Authentication and Verification
18
156 EN 9300-007 Aerospace series - LOTAR -LOng Term Archiving
and Retrieval of digital technical product
documentation such as 3D, CAD and PDM data -
Part 007: Terms an References
23
157 FprEN 2591-100 Aerospace series - Elements of electrical and optical
connection - Test methods - Part 100: General
25
158 FprEN 2899 Aerospace series - Vulcanized rubbers - Test on the
susceptibility to corrosion in a damp atmosphere of
metals in contact with vulcanized rubbers
9
159 FprEN 3646-003 Aerospace series - Connectors, electrical, circular,
bayonet coupling, operating temperature 175 °C or
200 °C continuous - Part 003: Receptacle, square
flange mounting - Product standard
8
160 FprEN 3719 Aerospace series - Aluminium or aluminium alloy
conductors for electrical cables - Product standard
8
161 FprEN 4165-022 Aerospace series - Connectors, electrical,
rectangular, modular - Operating temperature 175
°C continuous - Part 022: Insertion/extraction tool
for removal of modules - Product standard
7
162 FprEN 4604-010 Aerospace series - Cable, electrical, for signal
transmission - Part 010: Cable, coaxial, light
weight, 50 Ohms, 200 °C, type KX (light WD) -
Product standard
11
163 FprEN 4832 Aerospace series - Adaptor, Pipe coupling 24° Cone
up to 35000 kPa (5080 psi) Ring-locked fitting and
Ring-locked fitting-reducer - Inch Series -
Technical specification
27
164 FprEN 4833 Aerospace series - Pipe coupling 24° Cone up to
35000 kPa (5080 psi) Ring-locked fitting - Flareless
End - Inch Series - Extra Fine Thread Pitch
12
165 FprEN 4834 Aerospace series - Adaptor, Pipe coupling 24° Cone 10
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 11/2017 15/41
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
up to 35000 kPa (5080 psi) Port for Ring locked
fitting - Inch Series - Geometric configuration
166 FprEN 4835 Aerospace series - Installation and removal
requirements for Ring locked fitting and reducer,
24° Cone up to 35000 kPa (5080 psi) - Inch Series
17
167 FprEN 4836 Aerospace series - Adaptor, Pipe coupling 24° Cone
up to 35000 kPa (5080 psi) Ring-locked fitting -
Reducer - Flareless End - Inch Series - Extra Fine
Thread Pitch
12
168 FprEN 4838-005 Aerospace series - Arc fault circuit breakers, single-
pole, temperature compensated, rated current 3 A to
25 A - 115 V a.c. 400 Hz Constant Frequency - Part
005: With polarized signal contact - Product
standard
12
169 ISO/FDIS 6858 Aircraft - Ground support electrical supplies -
General requirements
35
170 prEN 16602-70-26 Space product assurance - Crimping of high-
reliability electrical connections
54
171 prEN 16602-70-60 Space product assurance - Qualification and
Procurement of printed circuit boards
266
Chế tạo (Hệ thống tự động hóa công nghiệp – Lò công nghiệp) Trở về đầu trang
172 ISO 13578 Industrial furnaces and associated processing
equipment - Safety requirements for machinery and
equipment for production of steel by electric arc
furnaces
33
173 ISO/DIS 10303-62 Industrial automation systems and integration -
Product data representation and exchange - Part 62:
Integrated generic resource: Equivalence validation
of product data
30
Chế tạo (Hàn đồng và hàn thiếc; Hệ thống máy công cụ) Trở về đầu trang
174 DIN 4003-180 Concept for the design of 3D models based on
properties according to DIN 4000 - Part 180: Tool
assemblies
33
175 DIN 4003-86 Concept for the design of 3D models based on
properties according to DIN 4000 - Part 86: Drills
and counter sinking tools for indexable inserts
109
176 FprEN 12814-4 Testing of welded joints of thermoplastics semi-
finished products - Part 4: Peel test
16
177 JIS Z 3110 Non-destructive testing of welded joints - Methods
of radiographic testing for X- and gamma-ray
techniques with digital detectors
74
Chế tạo (Thiết bị làm việc không phoi; Dụng cụ cầm tay) Trở về đầu trang
178 DIN 1530-1 Tools for moulding - Part 1: Ejector pins with
cylindrical head
7
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 11/2017 16/41
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
179 DIN 1530-2 Tools for moulding - Part 2: Shouldered ejector pins 6
180 DIN 1530-3 Tools for moulding - Part 3: Ejector pins with
conical head
7
181 ISO/FDIS 5393 Rotary tools for threaded fasteners - Performance
test method
43
Chế tạo (Xử lý bề mặt và mạ) Trở về đầu trang
182 DIN 50957-2 Testing of electrolytes used for electro-deposited
metallic coatings - Test involving electro-deposition
- Part 2: Special test cells
20
183 ISO 2063-1 Thermal spraying - Zinc, aluminium and their
alloys - Part 1: Design considerations and quality
requirements for corrosion protection systems
29
184 ISO 2063-2 Thermal spraying - Zinc, aluminium and their
alloys - Part 2: Execution of corrosion protection
systems
37
185 ISO 9717 Metallic and other inorganic coatings - Phosphate
conversion coating of metals
13
186 ISO/FDIS 2819 Metallic coatings on metallic substrates -
Electrodeposited and chemically deposited coatings
- Review of methods available for testing adhesion
11
187 ISO/FDIS 2931 Anodizing of aluminium and its alloys - Assessment
of quality of sealed anodic oxidation coatings by
measurement of admittance
5
188 ISO/FDIS 7599 Anodizing of aluminium and its alloys - Method for
specifying decorative and protective anodic
oxidation coatings on aluminium
21
189 prEN ISO 11124-1 Preparation of steel substrates before application of
paints and related products - Specifications for
metallic blast-cleaning abrasives - Part 1: General
introduction and classification (ISO/DIS 11124-
1:2017)
1
190 prEN ISO 11124-2 Preparation of steel substrates before application of
paints and related products - Specifications for
metallic blast-cleaning abrasives - Part 2: Chilled-
iron grit (ISO/DIS 11124-2:2017)
1
191 prEN ISO 11124-3 Preparation of steel substrates before application of
paints and related products - Specifications for
metallic blast-cleaning abrasives - Part 3: High-
carbon cast-steel shot and grit (ISO/DIS 11124-
3:2017)
1
192 prEN ISO 11124-4 Preparation of steel substrates before application of
paints and related products - Specifications for
metallic blast-cleaning abrasives - Part 4: Low-
carbon cast-steel shot (ISO/DIS 11124-4:2017)
1
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 11/2017 17/41
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
193 prEN ISO 11125-1 Preparation of steel substrates before application of
paints and related products - Test methods for
metallic blast-cleaning abrasives - Part 1: Sampling
(ISO/DIS 11125-1:2017)
1
194 prEN ISO 11125-2 Preparation of steel substrates before application of
paints and related products - Test methods for
metallic blast-cleaning abrasives - Part 2:
Determination of particle size distribution (ISO/DIS
11125-2:2017)
1
195 prEN ISO 11125-3 Preparation of steel substrates before application of
paints and related products - Test methods for
metallic blast-cleaning abrasives - Part 3:
Determination of hardness (ISO/DIS 11125-3:2017)
1
196 prEN ISO 11125-4 Preparation of steel substrates before application of
paints and related products - Test methods for
metallic blast-cleaning abrasives - Part 4:
Determination of apparent density (ISO/DIS 11125-
4:2017)
1
197 prEN ISO 11125-5 Preparation of steel substrates before application of
paints and related products - Test methods for
metallic blast-cleaning abrasives - Part 5:
Determination of percentage defective particles and
of microstructure (ISO/DIS 11125-5:2017)
1
198 prEN ISO 11125-6 Preparation of steel substrates before application of
paints and related products - Test methods for
metallic blast-cleaning abrasives - Part 6:
Determination of foreign matter (ISO/DIS 11125-
6:2017)
1
199 prEN ISO 11125-7 Preparation of steel substrates before application of
paints and related products - Test methods for
metallic blast-cleaning abrasives - Part 7:
Determination of moisture (ISO/DIS 11125-7:2017)
1
200 prEN ISO 11126-1 Preparation of steel substrates before application of
paints and related products - Specifications for non-
metallic blast-cleaning abrasives - Part 1: General
introduction and classification (ISO/DIS 11126-
1:2017)
1
201 prEN ISO 11126-3 Preparation of steel substrates before application of
paints and related products - Specifications for non-
metallic blast-cleaning abrasives - Part 3: Copper
refinery slag (ISO/DIS 11126-3:2017)
1
202 prEN ISO 11126-4 Preparation of steel substrates before application of
paints and related products - Specifications for non-
metallic blast-cleaning abrasives - Part 4: Coal
furnace slag (ISO/DIS 11126-4:2017)
1
203 prEN ISO 11126-5 Preparation of steel substrates before application of
paints and related products - Specifications for non-
1
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 11/2017 18/41
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
metallic blast-cleaning abrasives - Part 5: Nickel
refinery slag (ISO/DIS 11126-5:2017)
204 prEN ISO 11126-6 Preparation of steel substrates before application of
paints and related products - Specifications for non-
metallic blast-cleaning abrasives - Part 6: Iron
furnace slag (ISO/DIS 11126-6:2017)
1
205 prEN ISO 11126-8 Preparation of steel substrates before application of
paints and related products - Specifications for non-
metallic blast-cleaning abrasives - Part 8: Olivine
(ISO/DIS 11126-8:2017)
1
Hệ thống và kết cấu cơ khí (Ổ đỡ; Chi tiết lắp xiết) Trở về đầu trang
206 ASTM A320/A320M -17b
Replaces: ASTM
A320/A320M-17a
Standard Specification for Alloy-Steel and Stainless
Steel Bolting for Low-Temperature Service
8
207 DIN 9841 Hexagon socket head shoulder screw for press tools 7
208 ISO/FDIS 1206 Rolling bearings - Needle roller bearings with
machined rings - Boundary dimensions, geometrical
product specifications (GPS) and tolerance values
16
209 JIS B 1514-1 Rolling bearings - Geometrical product
specifications (GPS) and tolerance values - Part 1:
Radial bearings
60
210 JIS B 1514-2 Rolling bearings - Geometrical product
specifications (GPS) and tolerance values - Part 2:
Thrust bearings
30
Hệ thống và kết cấu cơ khí (Dẫn động và truyền động mềm; Bánh răng)
Trở về đầu trang
211 DIN 3990-16 Gears - FZG test procedures - Part 16:
Determination of the mico-pitting load-carrying
capacity of lubricants - FZG-test-method GT-
C/8,3/90
51
212 ISO/FDIS 5288 Synchronous belt drives - Vocabulary 22
Thiết bị xếp dỡ vật liệu (Cần trục; Thiết bị nâng) Trở về đầu trang
213 DIN EN 13155 Crane - Safety - Non-fixed load lifting attachments;
German and English version prEN 13155:2017
180
214 DIN EN 1993-6/NA National Annex - Nationally determined parameters
- Eurocode 3: Design of steel structures - Part 6:
Crane supporting structures
11
215 EN 13001-3-2/prA1 Cranes - General design - Part 3-2: Limit states and
proof of competence of wire ropes in reeving
systems
14
216 EN 1459-1 Rough-terrain trucks - Safety requirements and
verification - Part 1: Variable-reach trucks
65
217 ISO 9927-5 Cranes - Inspections - Part 5: Bridge and gantry 14
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 11/2017 19/41
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
cranes, including portal and semi-portal cranes and
their supporting structures
218 ISO/DIS 7590 Steel cord conveyor belts - Methods for the
determination of total thickness and cover thickness
7
219 KS B ISO 10245-4 Cranes-Limiting and indicating devices-Part
4:Jib cranes
8
220 KS B ISO 10245-5 Cranes-Limiting and indicating devices-Part
5:Overhead travelling and portal bridge cranes
8
221 KS B ISO 10972-2 Cranes-Requirements for mechanisms- Part
2:Mobile cranes
10
222 KS B ISO 10972-4 Cranes-Requirements for mechanisms- Part
4:Jib cranes
9
223 KS B ISO 10972-5 Cranes-Requirements for mechanisms- Part
5:Bridge and gantry cranes
8
224 KS B ISO 7752-1 Cranes-Controls layout and characteristics-Part
1:General principles
12
225 KS B ISO 8686-5 Cranes-Design principles for loads and load
combinations-Part 5:Overhead travelling cranes
and portal bridge cranes
10
226 prEN 13155 Crane - Safety - Non-fixed load lifting attachments 92
Thiết bị xếp dỡ vật liệu (Máy làm đất) Trở về đầu trang
227 ISO 7135 DAM 1 Earth-moving machinery - Hydraulic excavators -
Terminology and commercial specifications;
Amendment 1
1
228 KS B ISO 4510-2 Earth-moving machinery-Service tools-Part
2:Mechanical pullers and pushers
15
229 KS B ISO 6394 Earth-moving machinery . Determination of
emission sound pressure level at operator's position
. Stationary test conditions
12
230 KS B ISO 6395 Earth-moving machinery . Determination of sound
power level . Dynamic test conditions
47
231 KS B ISO 6396 Earth-moving machinery . Determination of
emission sound pressure level at operator's position
. Dynamic test conditions
12
232 KS B ISO 6746-2 Earth-moving machinery-Definitions of
dimensions and symbols-Part 2:Equipment
19
233 KS B ISO 6747 Earth-moving
machinery-Tractor-dozers-Terminology and
commercial specifications
39
Luyện kim (Luyện kim bột, kim loại màu) Trở về đầu trang
234 ASTM A494/A494M-17a
Replaces: ASTM
Standard Specification for Castings, Nickel and
Nickel Alloy
7
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 11/2017 20/41
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
A494/A494M-17
235 ASTM B179-17 Replaces:
ASTM B179-14
Standard Specification for Aluminum Alloys in
Ingot and Molten Forms for Castings from All
Casting Processes
10
236 ASTM B248M-17 Replaces:
ASTM B248M-12
Standard Specification for General Requirements
for Wrought Copper and Copper-Alloy Plate, Sheet,
Strip, and Rolled Bar (Metric)
13
237 ASTM B283/B283M-17a
Replaces: ASTM
B283/B283M-17
Standard Specification for Copper and Copper-
Alloy Die Forgings (Hot-Pressed)
15
238 ASTM B367-13(2017)
Replaces: ASTM B367-13
Standard Specification for Titanium and Titanium
Alloy Castings
13
239 ASTM B425-11(2017)
Replaces: ASTM B425-11
Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy
(UNS N08825, UNS N08221, and UNS N06845)
Rod and Bar
5
240 ASTM B440-12(2017)
Replaces: ASTM B440-12
Standard Specification for Cadmium 12
241 ASTM B495-10(2017)
Replaces: ASTM B495-10
Standard Specification for Zirconium and
Zirconium Alloy Ingots
3
242 ASTM B540-97(2017)
Replaces: ASTM B540-
97(2012)
Standard Specification for Palladium Electrical
Contact Alloy
3
243 ASTM B551/B551M-
12(2017) Replaces: ASTM
B551/B551M-12
Standard Specification for Zirconium and
Zirconium Alloy Strip, Sheet, and Plate
10
244 ASTM B562-95(2017)
Replaces: ASTM B562-
95(2012)
Standard Specification for Refined Gold 4
245 ASTM B589 -94(2107)
Replaces: ASTM B589-
94(2012)
Standard Specification for Refined Palladium 2
246 ASTM B754-17 Replaces:
ASTM B754-10(2015)e1
Standard Test Method for Measuring and Recording
the Deviations from Flatness in Copper and Copper
Alloy Strip
6
247 ASTM B811-13(2017)
Replaces: ASTM B811-13e1
Standard Specification for Wrought Zirconium
Alloy Seamless Tubes for Nuclear Reactor Fuel
Cladding
17
248 ASTM B906-02(2017)
Replaces: ASTM B906-
02(2012)
Standard Specification for General Requirements
for Flat-Rolled Nickel and Nickel Alloys Plate,
Sheet, and Strip
16
249 DIN EN 12438 Magnesium and magnesium alloys - Magnesium
alloys for cast anodes; German version EN
12438:2017
20
250 DIN EN 1982 Copper and copper alloys - Ingots and castings;
German version EN 1982:2017
65
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 11/2017 21/41
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
251 EN 12438 Magnesium and magnesium alloys - Magnesium
alloys for cast anodes
18
252 EN 1982 Copper and copper alloys - Ingots and castings 76
253 ISO 3927 Metallic powders, excluding powders for
hardmetals - Determination of compressibility in
uniaxial compression
9
Luyện kim (Kim loại đen; Sản phẩm sắt và thép) Trở về đầu trang
254 ASTM A1017/A1017M-17
Replaces: ASTM
A1017/A1017M-11(2015)
Standard Specification for Pressure Vessel Plates,
Alloy Steel, Chromium-Molybdenum-Tungsten
3
255 ASTM A203/A203M-17
Replaces: ASTM
A203/A203M-12
Standard Specification for Pressure Vessel Plates,
Alloy Steel, Nickel
3
256 ASTM A204/A204M-17
Replaces: ASTM
A204/A204M-12
Standard Specification for Pressure Vessel Plates,
Alloy Steel, Molybdenum
3
257 ASTM A225/A225M-17
Replaces: ASTM
A225/A225M-12
Standard Specification for Pressure Vessel Plates,
Alloy Steel, Manganese-Vanadium-Nickel
3
258 ASTM A285/A285M-17
Replaces: ASTM
A285/A285M-12
Standard Specification for Pressure Vessel Plates,
Carbon Steel, Low- and Intermediate-Tensile
Strength
3
259 ASTM A299/A299M-17
Replaces: ASTM
A299/A299M-09(2014)
Standard Specification for Pressure Vessel Plates,
Carbon Steel, Manganese-Silicon
3
260 ASTM A302/A302M -17
Replaces: ASTM
A302/A302M-12
Standard Specification for Pressure Vessel Plates,
Alloy Steel, Manganese-Molybdenum and
Manganese-Molybdenum-Nickel
3
261 ASTM A352/A352M-17
Replaces: ASTM
A352/A352M-06(2012)
Standard Specification for Steel Castings, Ferritic
and Martensitic, for Pressure-Containing Parts,
Suitable for Low-Temperature Service
5
262 ASTM A353/A353M-17
Replaces: ASTM
A353/A353M-09(2014)
Standard Specification for Pressure Vessel Plates,
Alloy Steel, Double-Normalized and Tempered 9%
Nickel
3
263 ASTM A387/A387M-17a
Replaces: ASTM
A387/A387M-17
Standard Specification for Pressure Vessel Plates,
Alloy Steel, Chromium-Molybdenum
6
264 ASTM A455/A455M-
12a(2107) Replaces: ASTM
A455/A455M-12a
Standard Specification for Pressure Vessel Plates,
Carbon Steel, High-Strength Manganese
3
265 ASTM A517/A517M-17
Replaces: ASTM
A517/A517M-10(2015)
Standard Specification for Pressure Vessel Plates,
Alloy Steel, High-Strength, Quenched and
Tempered
4
266 ASTM A553/A553M-17
Replaces: ASTM
Standard Specification for Pressure Vessel Plates,
Alloy Steel, Quenched and Tempered 7, 8, and 9 %
4
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 11/2017 22/41
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
A553/A553M-14 Nickel
267 ASTM A6/A6M-17a -
Replaces: ASTM A6/A6M-
13a
Standard Specification for General Requirements
for Rolled Structural Steel Bars, Plates, Shapes, and
Sheet Piling
63
268 ASTM A703/A703M-17a
Replaces: ASTM
A703/A703M-17
Standard Specification for Steel Castings, General
Requirements, for Pressure-Containing Parts
12
269 ASTM A736/A736M-17
Replaces: ASTM
A736/A736M-12
Standard Specification for Pressure Vessel Plates,
Low-Carbon Age-Hardening Nickel-Copper-
Chromium-Molybdenum-Columbium (Niobium)
Alloy Steel
3
270 ASTM A737/A737M -
09(2017) Replaces: ASTM
A737/A737M-09(2013)
Standard Specification for Pressure Vessel Plates,
High-Strength, Low-Alloy Steel
3
271 ASTM A743/A743M-17
Replaces: ASTM
A743/A743M-13ae1
Standard Specification for Castings, Iron-
Chromium, Iron-Chromium-Nickel, Corrosion
Resistant, for General Application
8
272 ASTM A832/A832M-17
Replaces: ASTM
A832/A832M-10(2015)e1
Standard Specification for Pressure Vessel Plates,
Alloy Steel, Chromium-Molybdenum-Vanadium
4
273 ASTM A841/A841M-17
Replaces: ASTM
A841/A841M-13
Standard Specification for Steel Plates for Pressure
Vessels, Produced by Thermo-Mechanical Control
Process (TMCP)
10
274 ASTM A971/A971M-17
Replaces: ASTM
A971/A971M-10
Standard Test Method for Measuring Edge Taper
and Crown of Flat-Rolled Electrical Steel Coils
4
275 DIN EN 10253-2 Butt-welding pipe fittings - Part 2: Non alloy and
ferritic alloy steels with specific inspection
requirements; German and English version prEN
10253-2:2017
291
276 DIN EN 10253-4 Butt-welding pipe fittings - Part 4: Wrought
austenitic and austenitic-ferritic (duplex) stainless
steels with specific inspection requirements;
German and English version prEN 10253-4:2017
302
277 ISO/DIS 5000 Steel sheet, aluminium-silicon alloy-coated by the
continuous hot-dip process, of commercial and
drawing qualities
17
278 ISO/FDIS 945-1 Microstructure of cast irons - Part 1: Graphite
classification by visual analysis
32
279 JIS G 3454 Carbon steel pipes for pressure service 20
280 prEN 10225-1 Weldable structural steels for fixed offshore
structures - Technical delivery conditions - Part 1:
Plates
64
281 prEN 10225-2 Weldable structural steels for fixed offshore
structures - Technical delivery conditions - Part 2:
55
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 11/2017 23/41
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
Sections
282 prEN 10225-3 Weldable structural steels for fixed offshore
structures - Technical delivery conditions - Part 3:
Hot finished hollow sections
60
283 prEN 14509-2 Double skin metal faced insulating panels - Factory
made products - Specifications - Part 2: Structural
applications - Fixings and potential uses of
stabilization of individual structural elements
Luyện kim (Thử nghiệm kim loại; Ăn mòn kim loại) Trở về đầu trang
284 DIN 50994 Measurement of coatings - Non-destructive
measurement of the conductivity of metallic
coatings
37
285 ISO/DIS 10893-6 Non-destructive testing of steel tubes - Part 6:
Radiographic testing of the weld seam of welded
steel tubes for the detection of imperfections
13
286 ISO/DIS 10893-7 Non-destructive testing of steel tubes - Part 7:
Digital radiographic testing of the weld seam of
welded steel tubes for the detection of imperfections
19
287 ISO/DIS 14993 Corrosion of metals and alloys - Accelerated testing
involving cyclic exposure to salt mist, dry and wet
conditions
18
288 ISO/FDIS 4545-1 Metallic materials - Knoop hardness test - Part 1:
Test method
24
289 ISO/FDIS 4545-2 Metallic materials - Knoop hardness test - Part 2:
Verification and calibration of testing machines
18
290 ISO/FDIS 4545-3 Metallic materials - Knoop hardness test - Part 3:
Calibration of reference blocks
12
291 ISO/FDIS 4545-4 Metallic materials - Knoop hardness test - Part 4:
Table of hardness values
27
292 JIS B 7724 Brinell hardness test - Verification and calibration
of testing machines
20
293 JIS B 7726 Rockwell hardness test - Verification and
calibration of testing machines and indenters
28
294 JIS B 7730 Rockwell hardness test - Calibration of reference
blocks
20
295 JIS B 7736 Brinell hardness test - Calibration of reference
blocks
14
296 prEN ISO 26203-1 Metallic materials - Tensile testing at high strain
rates - Part 1: Elastic-bar-type systems (ISO/FDIS
26203-1:2017)
1
Điện tử - Thiết bị điện tử Trở về đầu trang
297 DIN 87378 Remote control gear with transmission tube for
manual operation - Symbols for schematic drawings
10
298 DIN 87379 Remote control gear with transmission tube for 16
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 11/2017 24/41
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
manual operation -Technical delivery conditions,
construction details
299 DIN 87380 Remote control gear with transmission tube for
manual operation - Fork links for uncoupling with
square hole for setting-up connection
13
300 DIN 87382 Remote control gear with transmission tube for
manual operation - Leading-through bearing with
slewable crown gear units, watertight
8
301 DIN 87383 Remote control gear with transmission tube for
manual operation - Intermediate control point
8
302 DIN 87384 Remote control gear with transmission tube for
manual operation - Wall control point, hinged
10
303 KS B ISO 11807-2 Integrated optics . Vocabulary . Part 2: Terms used
in classification
11
304 prEN ISO 14880-1 Optics and photonics - Microlens arrays - Part 1:
Vocabulary (ISO/DIS 14880-1:2017)
1
Kỹ thuật điện Trở về đầu trang
305 ASTM D5637-05(2017)
Replaces: ASTM D5637-
05(2012)
Standard Test Method for Moisture Resistance of
Electrical Insulating Varnishes
2
306 FprEN ISO 80079-20-1 Explosive atmospheres - Part 20-1: Material
characteristics for gas and vapour classification -
Test methods and data (ISO/IEC/FDIS 80079-20-
1:2017)
1
307 IEC 60755:2017 General safety requirements for residual current
operated protective devices
65
308 IEC TS 62950:2017 Household and similar electrical appliances -
Specifying smart capabilities of appliances and
devices - General aspects
35
309 JIS C 2136 Electrical insulating materials used under severe
ambient conditions - Test methods for evaluating
resistance to tracking and erosion
26
310 JIS C 7709-
1/AMENDMENT 11
Lamp caps and holders together with gauges for the
control of interchangeability and safety Part 1:
Lamp caps (Amendment 11)
30
311 JIS C 7709-
2/AMENDMENT 11
Lamp caps and holders together with gauges for the
control of interchangeability and safety Part 2:
Lampholders (Amendment 11)
26
312 JIS C 7709-
3/AMENDMENT 11
Lamp caps and holders together with gauges for the
control of interchangeability and safety Part 3:
Gauges (Amendment 11)
42
313 JIS C 8500 Primary batteries - General 40
314 JIS C 8515 Primary batteries - Physical and electrical
specifications
52
315 KS C 3342 Local area network cable 24
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 11/2017 25/41
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
316 KS C IEC 60401-3 Terms and nomenclature for cores made of
magnetically soft ferrites - Part 3:Guidelines on
the format of data appearing in manufacturers'
catalogues of transformer and inductor cores
17
317 KS C IEC 60424-1 Ferrite cores-Guide on the limits of surface
irregularities-Part 1:General specification
13
318 KS C IEC 60424-2 Ferrite cores-Guide on the limits of surface
irregularities-Part 2:RM-cores
13
319 KS C IEC 60424-3 Ferrite cores-Guide on the limits of surface
irregularities-Part 3:ETD-cores and E-cores
18
320 KS C IEC 60424-4 Ferrite cores-Guide on the limits of surface
irregularities-Part 4:Ring-cores
11
Công nghệ ảnh Trở về đầu trang
321 ISO/FDIS 12636 Graphic technology - Blankets for offset printing 11
322 JIS B 7081 Optics and photonics - Spectroscopic measurement
methods for integrated scattering by plane optical
elements
16
323 KS B 5501 Photographic lightBalancing 8
324 KS B ISO 10110-1 Optics and photonics . Preparation of drawings for
optical elements and systems . Part 1: General
28
325 KS B ISO 10110-2 Optics and optical instruments-Preparation of
drawings for optical elements and systems-Part
2:Material imperfections-Stress birefringence
9
326 KS B ISO 10110-3 Optics and optical instruments-Preparation of
drawings for optical elements and systems-Part
3:Material imperfections-Bubbles and inclusions
10
327 KS B ISO 10110-4 Optics and optical instruments-Preparation of
drawings for optical elements and systems-Part
4:Material imperfections-Inhomogeneity and
striae
10
328 KS B ISO 9022-11 Optics and optical instruments-Environmental test
methods-Part 11:Mould growth
14
329 KS B ISO 9022-12 Optics and optical instruments-Environmental test
methods-Part 12:Contamination
16
330 KS B ISO 9022-14 Optics and optical instruments-Environmental test
methods-Part 14:Dew, hoarfrost, ice
12
331 KS B ISO 9022-17 Optics and optical instruments-Environmental test
methods-Part 17:Combined contamination, solar
radiation
11
332 KS B ISO 9022-20 Optics and optical instruments-Environmental test
methods-Part 20:Humid atmosphere containing
12
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 11/2017 26/41
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
sulfur dioxide or hydrogen sulfide
333 KS B ISO 9211-1 Optics and optical instruments-Optical
coatings-Part 1:Definitions
15
334 KS B ISO 9849 Optics and optical instruments-Geodetic
instruments-Vocabulary
30
Công nghệ thông tin và ứng dụng Trở về đầu trang
335 DIN 26100 Container file - Summary of different product files
for the data exchange
17
336 DIN EN 13757-4 Communication systems for meters - Part 4:
Wireless M-Bus communication; English version
prEN 13757-4:2017
104
337 FprCEN ISO/TS 21719-1 Electronic fee collection - Personalization of on-
board equipment - Part 1: Framework (ISO/DTS
21719-1:2017)
1
338 FprCEN ISO/TS 21719-2 Electronic fee collection - Personalization of on-
board equipment (OBE) - Part 2: Using dedicated
short-range communication (ISO/DTS 21719-
2:2017)
1
339 ISO/DIS 13120 Health informatics - Syntax to represent the content
of healthcare classification systems - Classification
Markup Language (ClaML)
59
340 ISO/IEC 14496-
16:2011/AMD4:2017
Amendment 4 - Information technology - Coding of
audio-visual objects - Part 16: Animation
Framework eXtension (AFX) - Pattern-based 3D
mesh coding (PB3DMC)
38
341 ISO/IEC 14651 AMD 1 Information technology - International string
ordering and comparison - Method for comparing
character strings and description of the common
template tailorable ordering; Amendment 1
3
342 ISO/IEC 18477-4:2017 Information technology - Scalable compression and
coding of continuous-tone still images - Part 4:
Conformance testing
31
343 ISO/IEC 20382-1:2017 Information technology - User interfaces - Face-to-
face speech translation - Part 1: User interface
15
344 ISO/IEC 20382-2:2017 Information technology - User interface - Face-to-
face speech translation - Part 2: System architecture
and functional components
19
345 ISO/IEC 23003-
4:2015/AMD2:2017
Amendment 1 - Information technology - MPEG
audio technologies - Part 4: Dynamic Range
Control - Reference software
3
346 ISO/IEC 23009-2:2017 Information technology - Dynamic adaptive
streaming over HTTP (DASH) - Part 2:
Conformance and reference software
70
347 ISO/IEC 27019:2017 Information technology - Security techniques - 33
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 11/2017 27/41
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
Information security controls for the energy utility
industry
348 ISO/IEC 27021:2017 Information technology - Security techniques -
Competence requirements for information security
management systems professionals
21
349 ISO/IEC 27050-3:2017 Information technology - Security techniques -
Electronic discovery - Part 3: Code of practice for
electronic discovery
28
350 ISO/IEC 30134-5:2017 Information technology - Data centres - Key
performance indicators - Part 5: IT Equipment
Utilization for servers (ITEUsv)
7
351 ISO/IEC 30140-2:2017 Information technology - Underwater acoustic
sensor network (UWASN) - Part 2: Reference
architecture
38
352 ISO/IEC 7816-15 DAM 1 Identification cards - Integrated circuit cards - Part
15: Cryptographic information application;
Amendment 1
2
353 ISO/IEC DIS 10373-3 Identification cards - Test methods - Part 3:
Integrated circuit cards with contacts and related
interface devices
55
354 ISO/IEC DIS 10373-6 Identification cards - Test methods - Part 6:
Proximity cards
426
355 ISO/IEC FDIS 10118-3 Information technology - Security techniques -
Hash-functions - Part 3: Dedicated hash-functions
313
356 ISO/IEC FDIS 7816-9 Identification cards - Integrated circuit cards - Part
9: Commands for card management
21
357 ISO/IEC TR 20748-2:2017 Information technology for learning, education and
training - Learning analytics interoperability - Part
2: System requirements
13
358 ISO/IEC TR 23008-13:2017 Information technology - High efficiency coding
and media delivery in heterogeneous environments
- Part 13: MPEG media transport implementation
guidelines
87
359 ISO/IEC TR 29170-1:2017 Information technology - Advanced image coding
and evaluation - Part 1: Guidelines for image
coding system evaluation
35
360 ISO/IEC TS 19249:2017 Information technology - Security techniques -
Catalogue of architectural and design principles for
secure products, systems and applications
26
361 ISO/IEC TS 33073:2017 Information technology - Process assessment -
Process capability assessment model for quality
management
298
362 ISO/IEC/IEEE 26513:2017 Systems and software engineering -- Requirements
for testers and reviewers of information for users
40
363 ISO/IEC/IEEE 8802- Amendment 1 - Information technology - 507
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 11/2017 28/41
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
22:2015/AMD1:2017 Telecommunications and information exchange
between systems - Local and metropolitan area
networks - Specific requirements - Part 22:
Cognitive Wireless RAN Medium Access Control
(MAC) and Physical Layer (PHY) Specifications:
Policies and Procedures for Operation in the TV
Bands - Management and control plane interfaces
and procedures and enhancement to the
management information base (MIB)
364 ISO/IEC/IEEE 8802-
22:2015/AMD2:2017
Amendment 2 - Information technology -
Telecommunications and information exchange
between systems - Local and metropolitan area
networks - Specific requirements - Part 22:
Cognitive Wireless RAN Medium Access Control
(MAC) and Physical Layer (PHY) Specifications:
Policies and Procedures for Operation in the TV
Bands - Enhancement for broadband services and
monitoring applications
278
365 JIS X 6302-2/ERRATUM 1 ERRATUM 1 1
Viễn thông. Kỹ thuật âm thanh và hình ảnh Trở về đầu trang
366 CISPR TR 18-1:2017 Radio interference characteristics of overhead
power lines and high-voltage equipment - Part 1:
Description of phenomena
80
367 CISPR TR 18-1:2017 RLV Radio interference characteristics of overhead
power lines and high-voltage equipment - Part 1:
Description of phenomena
161
368 CISPR TR 18-2:2017 Radio interference characteristics of overhead
power lines and high-voltage equipment - Part 2:
Methods of measurement and procedure for
determining limits
77
369 CISPR TR 18-2:2017 RLV Radio interference characteristics of overhead
power lines and high-voltage equipment - Part 2:
Methods of measurement and procedure for
determining limits
154
370 CISPR TR 18-3:2017 Radio interference characteristics of overhead
power lines and high-voltage equipment - Part 3:
Code of practice for minimizing the generation of
radio noise
52
371 CISPR TR 18-3:2017 RLV Radio interference characteristics of overhead
power lines and high-voltage equipment - Part 3:
Code of practice for minimizing the generation of
radio noise
105
372 IEC/IEEE 62704-1:2017 Determining the peak spatial-average specific
absorption rate (SAR) in the human body from
wireless communications devices, 30 MHz to 6
GHz - Part 1: General requirements for using the
finite difference time-domain (FDTD) method for
81
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 11/2017 29/41
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
SAR calculations
373 IEC/IEEE 62704-3:2017 Determining the peak spatial-average specific
absorption rate (SAR) in the human body from
wireless communications devices, 30 MHz to 6
GHz - Part 3: Specific requirements for using the
finite difference time domain (FDTD) method for
SAR calculations of mobile phones
72
Vật liệu xây dựng và Xây dựng nhà Trở về đầu trang
374 ASTM C544-03(2017)
Replaces: ASTM C544-
03(2013)
Standard Test Method for Hydration of Dead-
Burned Magnesite or Periclase Grain
3
375 ASTM C831-98(2017)
Replaces: ASTM C831-
98(2013)
Standard Test Methods for Residual Carbon,
Apparent Residual Carbon, and Apparent Carbon
Yield in Coked Carbon-Containing Brick and
Shapes
7
376 DIN 18216 Formwork ties; requirements, testing, use 20
377 DIN 4108 Beiblatt 2 Thermal insulation and energy economy in
buildings - Thermal bridges - Examples for
planning and performance
169
378 DIN EN 12453 Industrial, commercial and garage doors and gates -
Safety in use of power operated doors -
Requirements and test methods; German version
EN 12453:2017
68
379 DIN EN 12978 Industrial, commercial and garage doors and gates -
Safety devices for power operated doors and gates -
Requirements and test methods; German and
English version prEN 12978:2017
57
380 DIN EN 13203-2 Gas-fired domestic appliances producing hot water
- Part 2: Assessment of energy consumption;
German and English version prEN 13203-2:2017
86
381 DIN EN 13375 Flexible sheets for waterproofing - Waterproofing
of concrete bridge decks and other concrete surfaces
trafficable by vehicles - Specimen preparation;
German and English version prEN 13375:2017
26
382 DIN EN 303-1 Heating boilers - Part 1: Heating boilers with forced
draught burners - Terminology, general
requirements, testing and marking; German version
EN 303-1:2017
40
383 DIN EN 303-2 Heating boilers - Part 2: Heating boilers with forced
draught burners - Special requirements for boilers
with atomizing oil burners; German version EN
303-2:2017
19
384 EN 12604 Industrial, commercial and garage doors and gates -
Mechanical aspects - Requirements and test
methods
16
385 EN 12764/prA1 Sanitary appliances - Specification for whirlpool 6
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 11/2017 30/41
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
baths
386 EN 13310/prA1 Kitchen sinks - Functional requirements and test
methods
6
387 EN 13407/prA1 Wall-hung urinals - Functional requirements and
test methods
7
388 EN 14428/prA1 Shower enclosures - Functional requirements and
test methods
6
389 EN 14516/prA1 Baths for domestic purposes 6
390 EN 14527/prA1 Shower trays for domestic purposes 6
391 EN 16864 Building hardware - Mechatronic padlocks -
Requirements and test methods
45
392 EN 303-1 Heating boilers - Part 1: Heating boilers with forced
draught burners - Terminology, general
requirements, testing and marking
37
393 ISO 9836 Performance standards in building - Definition and
calculation of area and space indicators
23
394 ISO/DIS 10545-2 Ceramic tiles - Part 2: Determination of dimensions
and surface quality
14
395 JIS A 9521/ERRATUM 1 Thermal insulation materials for buildings;
ERRATUM
2
396 KS B 1527 Pipe supports 16
397 prEN 12390-3 Testing hardened concrete - Part 3: Compressive
strength of test specimens
17
398 prEN 12390-5 Testing hardened concrete - Part 5: Flexural
strength of test specimens
9
399 prEN 12390-7 Testing hardened concrete - Part 7: Density of
hardened concrete
10
400 prEN 12390-8 Testing hardened concrete - Part 8: Depth of
penetration of water under pressure
7
401 prEN 12504-1 Testing concrete in structures - Part 1: Cored
specimens - Taking, examining and testing in
compression
10
402 prEN 12609 Truck mixers - Safety requirements 42
403 prEN 13141-1 Ventilation for buildings - Performance testing of
components/products for residential ventilation -
Part 1: Externally and internally mounted air
transfer devices
25
404 prEN 13141-5 Ventilation for buildings - Performance testing of
components/products for residential ventilation -
Part 5: Cowls and roof outlet terminal devices
25
Xây dựng nhà (Âm học trong xây dựng) Trở về đầu trang
405 FprEN ISO 3822-3 Acoustics - Laboratory tests on noise emission from
appliances and equipment used in water supply
installations - Part 3: Mounting and operating
1
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 11/2017 31/41
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
conditions for in-line valves and appliances
(ISO/FDIS 3822-3:2017)
406 ISO 10848-1 Acoustics - Laboratory and field measurement of
flanking transmission for airborne, impact and
building service equipment sound between
adjoining rooms - Part 1: Frame document
35
407 ISO 10848-2 Acoustics - Laboratory and field measurement of
flanking transmission for airborne, impact and
building service equipment sound between
adjoining rooms - Part 2: Application to Type B
elements when the junction has a small influence
12
408 ISO 10848-3 Acoustics - Laboratory and field measurement of
flanking transmission for airborne, impact and
building service equipment sound between
adjoining rooms - Part 3: Application to Type B
elements when the junction has a substantial
influence
8
409 ISO 10848-4 Acoustics - Laboratory and field measurement of
flanking transmission for airborne, impact and
building service equipment sound between
adjoining rooms - Part 4: Application to junctions
with at least one Type A element
7
410 prEN ISO 11654 Acoustics - Sound absorbers - Rating of sound
absorption coefficients (ISO/DIS 11654:2017)
1
Xây dựng dân dụng (Hệ thống nước cống bên ngoài, Kỹ thuật làm đường)
Trở về đầu trang
411 EN 16933-2 Drain and sewer systems outside buildings - Design
- Part 2: Hydraulic design
40
412 DIN 67524-1 Lighting of street tunnels and underpasses - Part 1:
General quality characteristics and guide values
42
413 DIN 4034-101 Prefabricated concret manholes, unreinforced, steel
fiber and reinforced - Part 101: Evaluation of
conformity for drains and sewers in addition to DIN
EN 1917:2003-04
8
414 DIN 4034-1 Prefabricated concrete manholes, unreinforced,
steel fibre and reinforced - Part 1: Requirements,
test methods and marking for drains and sewers in
addition to DIN EN 1917:2003-04
43
415 DIN EN 12675 Traffic signal controllers - Functional safety
requirements; German version EN 12675:2017
26
Công nghệ chế biến gỗ Trở về đầu trang
416 ASTM D2395-17 Replaces:
ASTM D2395-14e1
Standard Test Methods for Density and Specific
Gravity (Relative Density) of Wood and Wood-
Based Materials
13
417 DIN 4072 Boards tongued and grooved made of coniferous 7
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 11/2017 32/41
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
timber
418 EN 13489 Wood-flooring and parquet - Multi-layer parquet
elements
27
419 ISO 4708 Composition cork - Gasket material - Test methods 8
Sơn và vecni Trở về đầu trang
420 DIN EN 927-10 Paints and varnishes - Coating materials and coating
systems for exterior wood - Part 10: Resistance to
blocking of paints and varnishes on wood; German
and English version prEN 927-10:2017
46
421 ISO/DIS 2812-5 Paints and varnishes - Determination of resistance
to liquids - Part 5: Temperature-gradient oven
method
7
422 ISO/FDIS 6270-1 Paints and varnishes - Determination of resistance
to humidity - Part 1: Condensation (single-sided
exposure)
6
423 ISO/FDIS 6270-3 Paints and varnishes - Determination of resistance
to humidity - Part 3: Condensation (in-cabinet
exposure with heated, bubbling water reservoir)
7
424 prEN 16402 Paints and varnishes - Assessment of emissions of
substances from coatings into indoor air - Sampling,
conditioning and testing
65
Công nghiệp dệt may (Vải tráng phủ; Vật liệu dệt, Xơ dệt) Trở về đầu trang
425 DIN 54056 Testing of colour fastness of textiles -
Determination of colour fastness of dyeings and
prints to sublimation in storage
6
426 ISO 2411 Rubber- or plastics-coated fabrics - Determination
of coating adhesion
11
427 ISO/FDIS 3175-1 Textiles - Professional care, drycleaning and
wetcleaning of fabrics and garments - Part 1:
Assessment of performance after cleaning and
finishing
8
428 ISO/FDIS 3175-2 Textiles - Professional care, drycleaning and
wetcleaning of fabrics and garments - Part 2:
Procedure for testing performance when cleaning
and finishing using tetrachloroethene
7
429 ISO/FDIS 3175-3 Textiles - Professional care, drycleaning and
wetcleaning of fabrics and garments - Part 3:
Procedure for testing performance when cleaning
and finishing using hydrocarbon solvents
7
430 prEN 16711-3 Textiles - Determination of metal content -
Determination of lead release by artificial saliva
solution
10
May mặc Trở về đầu trang
431 EN 13402-3 Size designation of clothes - Part 3: Size labelling 36
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 11/2017 33/41
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
based on body measurements and intervals
432 KS B 7007 Identification signs and terms on classification of
sewing machine heads for industrial use
12
Vật liệu gia cố phức hợp; Giấy và cactông Trở về đầu trang
433 ISO/FDIS 2797 Textile glass - Rovings - Basis for a specification 6
434 ISO/FDIS 5025 Reinforcement products - Woven fabrics -
Determination of width and length
4
435 ISO/FDIS 5629 Paper and board - Determination of bending
stiffness - Resonance method
12
Thủy tinh và gốm (Thủy tinh, vật liệu chịu lửa) Trở về đầu trang
436 ASTM C1351M-96(2017)
Replaces: ASTM C1351M-
96(2012)
Standard Test Method for Measurement of
Viscosity of Glass Between 104 Pa·s and 108 Pa·s
by Viscous Compression of a Solid Right Cylinder
[Metric]
4
437 ASTM C158-02(2017)
Replaces: ASTM C158-
02(2012)
Standard Test Methods for Strength of Glass by
Flexure (Determination of Modulus of Rupture)
9
438 ASTM C492-92(2017)
Replaces: ASTM C492-
92(2013)
Standard Test Method for Hydration of Granular
Dead-Burned Refractory Dolomite
2
439 ASTM C965-96(2017)
Replaces: ASTM C965-
96(2012)
Standard Practice for Measuring Viscosity of Glass
Above the Softening Point
5
440 DIN EN 12898 Glass in building - Determination of the emissivity;
German and English version prEN 12898:2017
47
Công nghệ chăm sóc sức khỏe (Nha khoa; Thiết bị y tế) Trở về đầu trang
441 DIN 13112-1 Medical instruments - Part 1: Scissors for
preparations without carbide inserts
5
442 DIN 13171 Medical instruments - Tissue forceps type Adson-
Brown
4
443 DIN 13172 Medical instruments - Vessel forceps type De
Bakey
5
444 DIN 13451 Medical instruments - Scissors type Joseph 5
445 DIN 13452 Medical instruments - Scissors type Kilner 4
446 DIN 58235-1 Medical instruments - Needle holder type Mayo-
Hegar - Part 1: Without carbide inserts
6
447 DIN 58237 Medical instruments - Splinter forceps type
Feilchenfeld
4
448 DIN 58238-1 Medical instruments - Part 1: Dissection forceps,
straight
5
449 DIN 58252-1 Medical instruments - Part 1: Surgical scissors,
straight without carbide inserts
5
450 DIN 58254 Medical instruments - Scissors for incisions 4
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 11/2017 34/41
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
451 DIN 58270 Medical instruments - Dressing forceps, angular 4
452 DIN 58271 Medical instruments - Dressing forceps, bayonet 4
453 DIN 58281-1 Medical instruments - Part 1: Strabismus scissors
without carbide inserts
5
454 DIN 58282 Medical instruments - Tenotomy scissors, type
Stevens
5
455 DIN 58846 Medical instruments - Raspatories 7
456 DIN 96123 Medical instruments - Needle holder type
Finochietto with carbide inserts
5
457 DIN 96128 Medical instruments - Needle holder type
Wangensteen with carbide inserts
6
458 DIN 96140 Medical instruments - Osteotomes type Stille 6
459 DIN 96144 Medical instruments - Raspatories type Williger 6
460 DIN 96146 Medical instruments - Retractors type Brunner 6
461 DIN 96156 Medical instruments - Retractor type Kocher, blade
curved
5
462 DIN 96166 Medical instruments - Handle for wire saws type
Gigli
4
463 ISO 7396-1 FDAM 1 Medical gas pipeline systems - Part 1: Pipeline
systems for compressed medical gases and vacuum;
Amendment 1
3
464 ISO 9917-2 Dentistry - Water-based cements - Part 2: Resin-
modified cements
21
465 ISO/FDIS 10524-1 Pressure regulators for use with medical gases - Part
1: Pressure regulators and pressure regulators with
flow-metering devices
33
466 ISO/FDIS 10524-2 Pressure regulators for use with medical gases - Part
2: Manifold and line pressure regulators
34
467 ISO/FDIS 13926-2 Pen systems - Part 2: Plunger stoppers for pen-
injectors for medical use
7
468 KS C 1929-1 U-healthcare ─ gateway ─ Particular requirements
for the basic safety and performance
12
469 KS C 1929-2 U-healthcare ─ electrocardiograph ─ Particular
requirements for the basic safety and performance
8
470 KS C 1929-3 U-healthcare ─ glucose meter ─ Particular
requirements for the basic safety and performance
8
471 KS C IEC 60601-1-3 Medical electrical equipment-Part 1-3:General
requirements for basic safety and essential
performance-Collateral Standard:Radiation
protection in diagnostic X-ray equipment
41
472 KS C IEC 60601-2-2 Medical electrical equipment-Part 2-2:Particular
requirements for the basic safety and essential
performance of high frequency surgical equipment
74
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 11/2017 35/41
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
and high frequency surgical accessories
473 KS C IEC 60601-2-19 Medical electrical equipment-Part 2-
19:Particular requirements for the basic safety and
essential performance of infant incubators
36
474 KS C IEC 60601-2-20 Medical electrical equipment-Part
2-20:Particular requirements for the basic safety
and essential performance of infant transport
incubators
42
475 KS C IEC 60601-2-21 Medical electrical equipment-Part 2-
21:Particular requirementsfor the basic safety and
essential performance of infant radiant warmers
33
476 KS C IEC 60601-2-22 Medical electrical equipment-Part 2-
22:Particular requirements for basic safety and
essential performance of surgical,
cosmetic,therapeutic and diagnostic laser equipment
25
477 KS C IEC 60601-2-27 Medical electrical equipment-Part 2-
27:Particular requirements for the basic safety and
essential performance of electrocardiographic
monitoring equipment
71
478 KS C IEC 60601-2-33 Medical electrical equipment-Part 2-
33:Particular requirements for the basic safety and
essential performance of magnetic resonance
equipment for medical diagnosis
120
479 KS C IEC 60601-2-37 Medical electrical equipment-Part 2-
37:Particular requirements for the basic safety and
essential performance of ultrasonic medical
diagnostic and monitoring equipment
47
480 KS C IEC 60601-2-41 Medical electrical equipment-Part 2-
41:Particular requirements for the basic safety and
essential performance of surgical luminaires and
luminaires for diagnosis
36
481 KS C IEC 60601-2-44 Medical electrical equipment-Part 2-
44:Particular requirements for the basic safety and
essential performance of x-ray equipment for
computed tomography
60
482 KS C IEC 60601-2-45 Medical electrical equipment-Part 2-
45:Particular requirements
483 prEN ISO 23907-1 Sharps injury protection - Requirements and test
methods - Part 1: Single-use sharps containers
(ISO/DIS 23907-1:2017)
1
Công nghệ chăm sóc sức khỏe (Tiệt khuẩn và khử trùng) Trở về đầu trang
484 DIN EN 13060/A1 Small steam sterilizers; German and English
version EN 13060:2014/prA1:2017
10
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 11/2017 36/41
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
485 FprEN ISO 13408-2 Aseptic processing of health care products - Part 2:
Sterilizing filtration (ISO/FDIS 13408-2:2017)
1
486 ISO/DIS 11607-1 Packaging for terminally sterilized medical devices
- Part 1: Requirements for materials, sterile barrier
systems and packaging systems
45
487 ISO/DIS 11607-2 Packaging for terminally sterilized medical devices
- Part 2: Validation requirements for forming,
sealing and assembly processes
21
488 ISO/FDIS 11737-1 Sterilization of health care products -
Microbiological methods - Part 1: Determination of
a population of microorganisms on products
54
Công nghệ chăm sóc sức khỏe (Y học thí nghiệm) Trở về đầu trang
489 DIN 58989 Haemostaseology - HPLC-MS methods for the
quantification of direct oral anticoagulants (DOAC)
- Rivaroxaban; Text in German and English
23
490 ISO 10993-11 Biological evaluation of medical devices - Part 11:
Tests for systemic toxicity
29
Thiết bị gia dụng – Giải trí - Thiết bị thể thao Trở về đầu trang
491 DIN 18865-2 Equipment for commercial kitchens - Food
distribution equipment - Part 2: Heated service
counters, requirements and testing
10
492 DIN 7892 Gymnastic and playing field equipment -
Electrically operated lifting devices - Functional
and safety requirements and testing
7
493 DIN EN 1069-1 Water slides - Part 1: Safety requirements and test
methods; German version EN 1069-1:2017
58
494 DIN EN 1069-2 Water slides - Part 2: Instructions; German version
EN 1069-2:2017
46
495 DIN EN 131-6 Ladders - Part 6: Telescopic ladders; German and
English version prEN 131-6:2017
47
496 DIN EN 71-14 Safety of toys - Part 14: Trampolines for domestic
use; German version EN 71-14:2014+A1:2017
39
497 DIN EN 71-3/A3 Safety of toys - Part 3: Migration of certain
elements; German and English version EN 71-
3:2013+A2:2017/prA3:2017
13
498 EN 13451-2/prA1 Swimming pool equipment - Part 2: Additional
specific safety requirements and test methods for
ladders, stepladders and handle bends
5
499 EN 16121+A1 Non-domestic storage furniture - Requirements for
safety, strength, durability and stability
22
500 FprEN 13200-3 Spectator facilities - Part 3: Separating elements -
Requirements
28
501 IEC 60335-2-82:2017 Household and similar electrical appliances - Safety
- Part 2-82: Particular requirements for amusement
20
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 11/2017 37/41
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
machines and personal service machines
502 ISO/FDIS 10045 Alpine skis - Binding mounting area - Requirements
for test screws
4
503 ISO/FDIS 6003 Alpine skis - Determination of mass and polar
moment of inertia - Laboratory measurement
method
6
504 ISO/FDIS 7138 Cross-country skis - Determination of mass and
location of balance point
3
505 ISO/FDIS 7139 Cross-country skis - Determination of elastic
properties
4
506 ISO/FDIS 7798 Cross-country skis - Determination of fatigue
indexes - Cyclic loading test
7
507 JIS C 9108 Electric vacuum cleaners 56
508 JIS S 1102 Beds for domestic use 18
509 JIS S 2147 Portable gas cookers with LPG cartridge 40
510 JIS S 2152 Direct connecting and Flexible hose connecting
type portable gas cookers with LPG cartridge
38
511 JIS S 2153 Portable gas space heaters with LPG cartridge 32
Bảo vệ sức khỏe. An toàn (Tiếng ồn đối với con người) Trở về đầu trang
512 ISO/FDIS 389-1 Acoustics - Reference zero for the calibration of
audiometric equipment - Part 1: Reference
equivalent threshold sound pressure levels for pure
tones and supra-aural earphones
10
Môi trường. Bảo vệ sức khỏe. An toàn (Ghi nhãn sinh thái, Vòng đời sản phẩm)
Trở về đầu trang
513 ISO 14044 FDAM 1 Environmental management - Life cycle assessment
- Requirements and guidelines - Amendment 1
3
514 ISO/FDIS 14026 Environmental labels and declarations - Principles,
requirements and guidelines for communication of
footprint information
17
Môi trường. Bảo vệ sức khỏe. An toàn (Phòng cháy, Phòng nổ) Trở về đầu trang
515 EN 16750 Fixed firefighting systems - Oxygen reduction
systems - Design, installation, planning and
maintenance
37
516 FprEN 14460 Explosion resistant equipment 36
517 FprEN ISO 18640-1 Protective clothing for firefighters - Physiological
impact - Part 1: Measurement of coupled heat and
moisture transfer with the sweating Torso
(ISO/FDIS 18640-1:2017)
1
518 FprEN ISO 18640-2 Protective clothing for fire-fighters - Physiological
impact - Part 2: Determination of physiological heat
load caused by protective clothing worn by
firefighters (ISO/FDIS 18640-2:2017)
1
519 ISO 7240-18 Fire detection and alarm systems - Part 18: 16
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 11/2017 38/41
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
Input/output devices
520 ISO 7240-22 Fire detection and alarm systems - Part 22: Smoke-
detection equipment for ducts
44
521 prEN 15276-1 Fixed firefighting systems - Condensed aerosol
extinguishing systems - Part 1: Requirements and
test methods for components
51
522 prEN 15276-2 Fixed firefighting systems - Condensed aerosol
extinguishing systems - Part 2: Design, installation
and maintenance
37
523 prEN 407 Protective gloves against thermal risks (heat and/or
fire)
23
Môi trường. Bảo vệ sức khỏe. An toàn (Thiết bị bảo vệ, An toàn trong gia đình)
Trở về đầu trang
524 ASTM F2704-17a Replaces:
ASTM F2704-17
Standard Specification for Air-Fed Protective
Ensembles
11
525 DIN 77200-1 Private security services - Part 1: General
requirements for security service providers
29
526 DIN 77200-3 Private security services - Part 3: Certification
procedure for the conformity assessment of private
security services in accordance with DIN 77200-1
22
527 JIS C 9335-2-7 Household and similar electrical appliances - Safety
- Part 2-7: Particular requirements for washing
machine
32
528 JIS C 9335-2-84 Household and similar electrical appliances - Safety
- Part 2-84: Particular requirements for toilets
appliances
28
Môi trường. Bảo vệ sức khỏe. An toàn (Công thái học) Trở về đầu trang
529 ISO 10075-1 Ergonomic principles related to mental workload -
Part 1: General issues and concepts, terms and
definitions
9
530 ISO 9241-125 Ergonomics of human-system interaction - Part
125: Guidance on visual presentation of information
40
531 ISO 9241-960 Ergonomics of human-system interaction - Part
960: Framework and guidance for gesture
interactions
24
532 ISO/FDIS 9241-11 Ergonomics of human-system interaction - Part 11:
Usability: Definitions and concepts
29
Môi trường (Chất lượng không khí) Trở về đầu trang
533 ASTM E2625-09(2017)
Replaces: ASTM E2625-09
Standard Practice for Controlling Occupational
Exposure to Respirable Crystalline Silica for
Construction and Demolition Activities
8
534 EN 16516 Construction products: Assessment of release of
dangerous substances - Determination of emissions
into indoor air
62
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 11/2017 39/41
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
535 ISO 9096 Stationary source emissions - Manual determination
of mass concentration of particulate matter
43
536 ISO/DIS 12219-8 Interior air of road vehicles - Part 8: Handling and
packaging of materials and components for
emission testing
9
537 JIS D 1047-1 Motorcycles - Measurement method for gaseous
exhaust emissions and fuel consumption - Part 1:
General test requirements
54
538 JIS D 1047-2 Motorcycles - Measurement method for gaseous
exhaust emissions and fuel consumption - Part 2:
Test cycles and specific test conditions
50
539 JIS D 1047-3 Motorcycles - Measurement method for gaseous
exhaust emissions and fuel consumption - Part 3:
Fuel consumption measurement at a constant speed
14
540 prEN 16868 Ambient air - Sampling and analysis of airbone
pollen grains and fungal spores for networks related
to allergy - Volumetric Hirst method
37
Môi trường (Chất lượng đất ; Chất lượng nước) Trở về đầu trang
541 ISO 11508 Soil quality - Determination of particle density 9
542 ISO 9696 Water quality - Gross alpha activity - Test method
using thick source
13
543 ISO/FDIS 7393-2 Water quality - Determination of free chlorine and
total chlorine - Part 2: Colorimetric method using
N,N-dialkyl-1,4-phenylenediamine, for routine
control purposes
19
544 ISO/TS 15923-2 Water quality - Determination of selected
parameters by discrete analysis systems - Part 2:
Chromium(VI), fluoride, total alkalinity, total
hardness, calcium, magnesium, iron, iron(II),
manganese and aluminium with photometric
detection
31
545 prEN ISO 8199 Water quality - General requirements and guidance
for microbiological examinations by culture
(ISO/DIS 8199:2017)
1
Đo lường và phép đo (Đo tuyến tính và đo góc) Trở về đầu trang
546 ISO/DIS 13385-1 Geometrical product specifications (GPS) -
Dimensional measuring equipment - Part 1: Desiign
and metrological characteristics of callipers
16
547 KS B ISO 1 Geometrical Product Specifications(GPS) .
Standard reference temperature for geometrical
product specification and verification
8
548 KS B ISO TR 14638 Geometrical product specification(GPS) .
Masterplan
20
Đo lường và phép đo (Dụng cụ đo nhiệt độ) Trở về đầu trang
549 JIS B 7529 Vapour pressure thermometers 14
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 11/2017 40/41
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
550 JIS B 7549 Liquid filled system thermometers 18
Âm học và phép đo âm Trở về đầu trang
551 ISO/DIS 7779 Acoustics - Measurement of airborne noise emitted
by information technology and telecommunications
equipment
68
552 JIS C 1509-1 Electroacoustics - Sound level meters - Part 1:
Specifications
46
553 KS B ISO 6393 Acoustics-Measurement of exterior noise emitted
by earth-moving machinery-Stationary test
conditions
32
554 prEN 13487 Heat exchanger - Forced convection air cooled
refrigerant condensers and dry coolers - Sound
measurement
27
555 prEN ISO 3743-2 Acoustics - Determination of sound power levels of
noise sources using sound pressure - Engineering
methods for small, movable sources in reverberant
fields - Part 2: Methods for special reverberation
test rooms (ISO/FDIS 3743-2:2017)
1
Thử nghiệm (Thử nghiệm môi trường; Phân tích cỡ hạt) Trở về đầu trang
556 JIS Z 8836 Colloidal systems - Methods for zeta-potential
determination - Optical methods
30
557 KS B 5570 Performance test for UV/Vis spectrophotometer 12
558 KS C IEC 60068-2-17 Basic environmental testing procedures Part
2:TGests-Test Q:Sealing
47
Dịch vụ. Tổ chức, quản lý và chất lượng công ty (Quản lý chất lượng và đảm bảo chất
lượng) Trở về đầu trang
559 ASTM E2987/E2987M-17
Replaces: ASTM
E2987/E2987M-16
Standard Terminology for Sustainable
Manufacturing
1
560 ISO/FDIS 10006 Quality management - Guidelines for quality
management in projects
34
561 JIS Q 55000 Asset management - Overview, principles and
terminology
28
562 JIS Q 55001 Asset management - Management systems -
Requirements
18
563 JIS Q 55002 Asset management - Management systems -
Guidelines for the application of JIS Q 55001
36
Bao gói và phân phối hàng hóa (vận chuyển hàng hóa, Chai- lọ) Trở về đầu trang
564 DIN 6106 Packaging - Glass containers - Side and base bosses 6
565 DIN EN 12726 Packaging - Cork mouth finish with a bore diameter
of 18,5 mm for corks and tamper evident capsules;
German and English version prEN 12726:2017
17
566 ISO 668 DAM 3 Series 1 freight containers - Classification, 3
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 11/2017 41/41
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
dimensions and ratings; Amendment 3
567 JIS Z 0201 Methods of designating on component parts and
points of containers when testing
10
568 JIS Z 0202 Method of drop test for packaged freights 12
Từ vựng (Thiết bị vận chuyển vật liệu) Trở về đầu trang
569 JIS D 6201 Self-propelled industrial trucks - Vocabulary 46
Ký hiệu đồ họa Trở về đầu trang
570 ISO/DIS 14617 Graphical symbols for diagrams 197
Tài liệu sản phẩm kỹ thuật Trở về đầu trang
571 ISO 13567-1 Technical product documentation - Organization
and naming of layers for CAD - Part 1: Overview
and principles
4
572 ISO 13567-2 Technical product documentation - Organization
and naming of layers for CAD - Part 2: Concepts,
format and codes used in construction
documentation
9
573 ISO 8887-1 Technical product documentation - Design for
manufacturing, assembling, disassembling and end-
of-life processing - Part 1: General concepts and
requirements
12
574 ISO/FDIS 129-1 Technical product documentation (TPD) -
Presentation of dimensions and tolerances - Part 1:
General principles
67
575 JIS B 0060-3 Digital technical product documentation (DTPD) -
Part 3: Presentation of design model for 3D
annotated model
22
576 JIS B 0060-4 Digital technical product documentation (DTPD) -
Part 4: Indication of annotation for 3D annotated
model - Dimensions and dimensional tolerances
66
577 KS A ISO 16016 Technical product documentation . Protection
notices for restricting the use of documents and
products
10
Để có toàn văn các tiêu chuẩn trên hoặc các tiêu chuẩn khác, vui lòng liên hệ:
Phòng Cung cấp Thông tin - Trung tâm Thông tin và Thống kê Khoa học và Công nghệ.
ĐC: 79 Trương Định (Lầu 1), Quận 1, TP. Hồ Chí Minh.
ÐT: 08. 38243826 (Trực tiếp) - 38297040 (số nội bộ 102, 203).
Fax: 08. 38291957 - Email: [email protected]