Titan Profile

Inclination

2. Cover hinge closely and adjust inclination into requested direction on titanium side part

1. Hold lens fixation firmly

Inclinate here

REDUCE ENLARGE

Temple Opening

1. Hold lens fixation firmly 2. Close temple by 45°

Temple Disassembly

3. Press cylinder out of SNAP-hinge. Apply pressure right beside hinge.

4. ATTENTION: Never bend temple

Temple Assembly

1

2

3

4

Turn temple forward by 180°

Bring temple into correct position again

Curve temple in large movements. Do not bend!

Temple Curving

Slide Number 1InclinationTemple OpeningTemple DisassemblyTemple AssemblySlide Number 6