Tishk International University College of Administrative ...
Tishk International University Civil Engineering ...
Transcript of Tishk International University Civil Engineering ...
10/17/2021
1
Chapter -3-
Status Bar
Lecturer: Asmaa Abdulmajeed
Lecturer: Asmaa Abdulmajeed AutoCAD 2021 Tishk International University 1
Tishk International University
Civil Engineering Department
2nd Stage - CE 221
Lecturer: Asmaa Abdulmajeed AutoCAD 2021 Tishk International University 2
The status bar modes help you make precise drawings in AutoCAD.
The tools in the status bar can be toggled on and off by clicking on their icons or by using their
function keys.
Not all status bar icons are visible by default and you can toggle the visibility of the icons as
per your requirements
Status Bar
10/17/2021
2
Lecturer: Asmaa Abdulmajeed AutoCAD 2021 Tishk International University 3
Contents Status Bar- Customization List
1. Coordinates
2. Grid
3. Snap mode
4. Dynamic Input
5. Ortho Mode
6. Polar Tracking
7. Isometric Drafting
8. Object Snap Tracking
9. 2D object Snap
10.Lineweight
19. Selection Cycling
20. 3D Object Snap
21. Dynamic UCS
22. Selection Filtering
23. Annotation Visibility
24. AutoScale
25. Annotation Scale
26. Workspace Switching
27. Annotation Monitor
Lecturer: Asmaa Abdulmajeed AutoCAD 2021 Tishk International University 4
1. Coordinates
Absolute Coordinates
All input points specify in your drawing using standard Cartesian coordinates x and y.
Using absolute coordinate, points entered by typing x,y [Enter]
10/17/2021
3
Lecturer: Asmaa Abdulmajeed AutoCAD 2021 Tishk International University 5
2. Grid (F7)
In the status bar, you will notice that the first icon looks like a grid.
This option toggles the visibility of the grid lines in the drawing area. You
can also use the F7 function key to toggle its visibility.
Lecturer: Asmaa Abdulmajeed AutoCAD 2021 Tishk International University 6
Some Function Keys to Remember
10/17/2021
4
Lecturer: Asmaa Abdulmajeed AutoCAD 2021 Tishk International University 7
3. Snap Mode (F9)
Increment Snap controls the movement of the cursor.
If it is off the cursor will move smoothly. If it is ON, the cursor will jump in an incremental movement.
The increment spacing can be changed, at any time using TOOLS/DRAFTING SETTINGS.
The default spacing is .250
Lecturer: Asmaa Abdulmajeed AutoCAD 2021 Tishk International University 8
10/17/2021
5
Lecturer: Asmaa Abdulmajeed AutoCAD 2021 Tishk International University 9
4. Dynamic Input
Dynamic Input allows you to enter the distances, angles, and other values right inside a drawing with a
visual reference.
Using the Dynamic Input tool, you can bypass the command line and enter the details directly in the
drawing.
You can also activate or deactivate the Dynamic Input mode using the F12 function key
Lecturer: Asmaa Abdulmajeed AutoCAD 2021 Tishk International University 10
10/17/2021
6
Lecturer: Asmaa Abdulmajeed AutoCAD 2021 Tishk International University 11
5. Orthomode (F8)
So far, we have used the line command to make geometries in arbitrary directions.
But if you want to restrict the direction of your lines to horizontal and vertical directions, then you can use
ortho mode.
Ortho mode restricts the movement of the cursor to a horizontal or vertical direction only, so with ortho mode
active, you will be able to make lines only in a horizontal or vertical direction.
press the F8 function key on
your keyboard
Lecturer: Asmaa Abdulmajeed AutoCAD 2021 Tishk International University 12
6. Polar Tracking (F10)
Polar Tracking is a drawing aid that allows you to set the angles that you commonly use and AutoCAD will
automatically lock your line at every increment of that angle while you are drawing.
Polar Tracking can be toggled on and off by using the F10 key on the keyboard.
10/17/2021
7
Lecturer: Asmaa Abdulmajeed AutoCAD 2021 Tishk International University 13
Lecturer: Asmaa Abdulmajeed AutoCAD 2021 Tishk International University 14
7. Isometric Drafting
10/17/2021
8
Lecturer: Asmaa Abdulmajeed AutoCAD 2021 Tishk International University 15
8. Object Snap Tracking – Autosnap (F11)
Lecturer: Asmaa Abdulmajeed AutoCAD 2021 Tishk International University 16
• Object Snap tracking is a great tool for
making geometries with reference to
existing points in a drawing.
• Object Snap modes are set in the Drafting
Settings dialog box.
• With object snap tracking, the cursor can
track along alignment paths based on
current object snap modes when specifying
points in a command. (AUTOSNAP system
variable)
10/17/2021
9
Lecturer: Asmaa Abdulmajeed AutoCAD 2021 Tishk International University 17
Making precise drawings in AutoCAD is not possible without Object Snaps, also called
OSNAPS.
Object Snap is an option on the status bar with a bunch of control points.
These control points are the geometric points, such as the endpoint, center, midpoint,
intersection, and so on, which if activated become available for selection in the drawing.
You can activate Object Snap by clicking on the icon once or by using its function key, F3.
9. Object Snap – Osnap (F3)
Lecturer: Asmaa Abdulmajeed AutoCAD 2021 Tishk International University 18
9. Object Snap – Osnap (F3)
The Object Snaps (Osnaps for short) are drawing aids which are
used in conjunction with other commands to help you draw
accurately.
Osnaps allow you to snap onto a specific object location when you
are picking a point.
For example, using Osnaps you can accurately pick the end point of
a line or the center of a circle.
10/17/2021
10
Lecturer: Asmaa Abdulmajeed AutoCAD 2021 Tishk International University 19
Lecturer: Asmaa Abdulmajeed AutoCAD 2021 Tishk International University 20
10. Lineweight - LWDisplay
10/17/2021
11
Lecturer: Asmaa Abdulmajeed AutoCAD 2021 Tishk International University 21
11. Selection Cycling
Selection cycling helps us make
selections of overlapping objects or
objects that are too close to make an
accurate selection in AutoCAD. To use
this tool, you need to activate it first from
the status bar.
Lecturer: Asmaa Abdulmajeed AutoCAD 2021 Tishk International University 22
10/17/2021
12
Lecturer: Asmaa Abdulmajeed AutoCAD 2021 Tishk International University 23
12. Workspacing Switching
Lecturer: Asmaa Abdulmajeed AutoCAD 2021 Tishk International University 24
13. Annotation Scale
Automated scaling of text,
dimensions, blocks, hatches and
attributes:
Text height, hatch size etc.
automatically calculated based
on scale.
Position and visibility can be
controlled based on scale
selected ƒ
10/17/2021
13
Lecturer: Asmaa Abdulmajeed AutoCAD 2021 Tishk International University 25
Model Space
Object Types
Text (Text, Mtext)
Dimensions (incl. Dimensions, Leaders,
Tolerances)
Multileaders (New object type)
Hatches
Blocks
Attributes
Easy to create! Easy to modify!
Annotation Scaling
References
1) http://autodesk.blogs.com/between_the_lines/autocad-release-history.html.
2) AUTOCAD® 2016 BEGINNING AND INTERMEDIATE, Munir M. Hamad Autodesk™ Approved Instructor.
3) http://www.imaginit.com/portals/4/documents/autocad-2019-release-comparison-matrix-en.pdf.
4) https://knowledge.autodesk.com/support/autocad/learnexplore/caas/CloudHelp/cloudhelp/2019/ENU/Auto
CAD-Core/files/GUID-B93A458E-1A7F-4090-A8CF-87A31C24E404-htm.html.
5) https://www.autodesk.com/shortcuts/autocad#A-C.
6) http://tutorial45.com/autocad-exercise-01/ .
7) Practical Autodesk AutoCAD 2021 and AutoCAD LT 2021.
Lecturer: Asmaa Abdulmajeed AutoCAD 2021 Tishk International University 26