tis the season - Amazon Web...

Copyright © 2013 Claudia’s Creations All rights reserved. No part of this may be reproduced in any form or by any means without permission in writing from the copyright holder. These

designs & instructions are for home non-commercial use by the original purchaser only. www.claudiascreationsaz.com

1

tis the season

Redwork Style Designs for the Embroidery Module

Original artwork by Kelley Smith

Designed and Digitized by

Claudia Dinnell

http://www.claudiascreationsaz.com/



2

Tis the season Finished size 58” x 58”

Supply List: Tis the Season Design CD for embroidery machines by Claudia Dinnell Design CD includes digitized designs in the following formats: art, dst, exp, hus, jef, pcs, pes, shv, vip, vp3, xxx. Print the embroidery and piecing instructions from the CD. Please print in color for easiest viewing. Minimum hoop sizes required to embroider these designs are a stitch field of 6” wide and 10” high.

Fabric Supply List: 3 3/4 yards White tone on tone background fabric for blocks & embroidered borders 1 yard Light grey tone on tone sashing fabric (for embroidered words) 2 ¼ yards Red tone on tone fabric for borders, pieced Seminole, and binding or

(3 ¼ yards if you don’t want to piece the outer border length) 8 yards Shape Flex SF101 by Pellon (lightweight woven, one sided fusible interfacing) 3 ½ yards Backing 65” x 65” Batting

Embroidery Supply List: Medium Weight Tear Away Stabilizer Temporary Adhesive Spray for fabric Removable fabric marking pen Basic embroidery kit including small doubled curved scissors, long straight pointy tweezers, etc. Embroidery Needles Sharps 80/12 40wt Embroidery Thread: Isacord Thread Colors are listed: 0020 Black

1904 Red

1355 Brown

2920 Purple

1102 Orange

0824 Gold

0702 Yellow

3901 Medium Blue

3910 Light Blue

5722 Light Green

5933 Medium Green

5934 Dark Green

0015 White

Sewing Supply List 50wt. Cotton Thread matching the fabric. Basic sewing kit including scissors, pins, rotary cutter & mat, long straight ruler, etc. Sizing or Starch Optional: 20 ½” square ruler for accurate marking & trimming.




3

Tis the Season

Cutting Instructions:

White tone on tone background fabric (3 ¾ Yards): Iron/press woven interfacing to the back of each block and Border strip. The interfacing may be slightly smaller than the block. Seal the two layers well. (Refer to Tips for Successful Embroidery.) The blocks will shrink some, don’t worry.

Cut (1) strip 13” wide x width of fabric: Sub cut into: (1) 13” x 13” (Tree Topper) (1) 13” x 15” (Cookies & Milk) Cut (1) strip 28” wide x width of fabric: Sub cut into: (1) 28” x 15” (Stocking block) (1) 28” x 15” (Teddy Bear & Present block) Cut (1) strip 14” x width of fabric: Sub cut into:

(1) 14” x 28” (Ornament Block) (1) 13” x 13” (Snow Globe Block) 40” Wide Fabric: you will need to cut a separate 13” Strip and sub cut (1) 13” square (shown in picture above) 42” Wide Fabric: cut the Snow Globe block from the same strip (not shown in picture above)

Light grey sashing fabric (1 Yard): Embroidered Word Borders & Seminole piecing Embroidered Word Borders Cut (3) 5” strips x width of fabric: Press/iron woven interfacing to the back of each strip. Sub cut (2) strips into: (4 pieces) 5” x 20” Sub cut (1) strip into: (1 piece) 5” x 26” The remaining fabric is for the Seminole piecing (no interfacing needed). Set aside for now.




4

Red tone on tone inner border & binding fabric (1 ¼ yards):

Cut (4) 2 ½” x length of fabric for Inner Borders

Cut (5) 2 ½” Length of fabric for Binding

Cut (1) 2” x length of fabric (for Seminole piecing)

No interfacing on these pieces. Set aside for later.

Red tone on tone outer border fabric (2 yards no piecing or 1 yard piecing the border):

Cut (4) strips 3 ½” x length of fabric (no piecing) or

Cut (8) strips 3 ½” x width of fabric (piece strips to get correct length)

No interfacing on these pieces. Set aside for later.

Cut (4) 3 ½” x length (72”) of fabric Cut (8) 3 ½” x width (40”) of fabric




5

Tips for Successful Embroidery!

Keep these pages accessible, you will need to refer to these “Tips” throughout your embroidery!!

Follow Claudia’s two step “Perfect Placement Technique” for accuratly multi-hooping large designs! Step #1: Marking the design’s first stitch location on the grid: Attach the hoop and grid to the module with no fabric. Open the design to be embroidered. Advance to the embroidery sewing screen. Embroidery Machines open a design in an editing screen. Touch the icon that moves you to the embroidery sewing screen. Advancing to the embroidery sewing screen takes you to the first stitch of the design, where you are ready to embroider! Some Brother, Babylock, and Pfaff machines have an automatic center stitch programmed into the machine. You must advance past this “programmed center stitch” to move to the first stitch of my designs. These machines will have an additional icon you will need to touch to move you to first stitch of my design. Bernina machines with a Basting Box option must make sure the built in basting box option is turned off before they advance to the embroidery sewing screen. Then by hand, lower your needle to touch the grid. Place an arrow shaped post-it-note on the grid so the tip of the arrow touches the tip of the needle. (See picture) This marks the first stitch location of my design on the grid (not the center of the design, not the center of the hoop, but the first stitch of the opened design). Raise the needle; remove the hoop and grid from the module. Step #2: Hooping the Fabric Place the inner hoop with the grid on the (stabilized and marked) background fabric. The arrow shaped post-it-note on the grid should be pointing to either the Needle Alignment or to the Placement Line location on the background fabric. The location is noted in the Embroidery Instructions and will be different for each hooping (it will almost never be the center of the hoop). Hoop the (stabilized and marked) fabric with the lines on the grid parallel and perpendicular to the drawn lines on the fabric. The drawn lines need not lie exactly under the lines of the grid, but must be parallel and perpendicular to the lines on the grid. This keeps the larger piece of fabric square and straight as you embroider. Remove the grid from the hoop and attach the hoop to the module. After you have connected the hoop to the module, the needle may need a little adjustment to be exactly over the Needle Alignment or Placement Line that are on the fabric. If needed, select the Move Hoop Icon & move the hoop to position the needle perfectly over the mark. The Needle Alignment is to place the needle correctly on the fabric, usually it is not to be sewn out; it is for needle placement only (unless otherwise indicated). If you accidently sew it out it will look like a crosshair, pick it out! To watch a demo of the “Perfect Placement Technique” from your computer go to: www.claudiascreationsaz.com Select the “Workshops” tab and choose Instructional Videos / Perfect Placement.

Additional Tips and Helps! Tip #1: Built in Basting Box!

A. Many embroidery machines have a built-in basting box option. When this option is enabled it may add a color stop to the stitching order of the design. This option should be disabled before opening a design. If the basting box option is on or enabled when you advance to the embroidery sewing screen, you would be marking the grid with the first stitch position for the basting box and not the first stitch of the design! Be sure to disable the basting box option before opening a design. Mark the first stitch of the design with the post-it note arrow. Hoop your fabric. Now turn on or enable the basting box option and sew the basting box out. After sewing out the built-in basting box, turn it off, if your machine doesn’t turn it off automatically. BERNINA’s have two basting box options; turn off both before marking the grid. Leaving it on will add a thread color stop and the numbering of the colors in the instructions will be off by one: The added color for the basting box. Be sure this option if off before marking the Needle Alignment.

Tip #2: Hooping Tips A. Spray temporary adhesive to the tear away stabilizer and adhere to the wrong side of

the background fabric. Hoop both layers as if they were one. The piece of stabilizer must always be cut larger than the actual hoop size. This will help keep the embroidery stabilized and reduce puckering. For additional stabilization slide or float a second piece of stabilizer under the hoop!

B. To make hooping easier, only stabilize the area to be embroidered.





6

C. I place sections of permanent double sided tape (not repositionable) on the wrong side of the inner hoop.

Then I flip the inner hoop right side up and place the inner hoop, with the grid inside of it, on the fabric. The doubled sided tape holds the inner hoop to the fabric. This makes it easier to pick up the inner hoop and fabric and place it in the outer hoop with ease. (Always loosen the outer hoop screws as much as possible).

D. You may find it easier to hoop the fabric if you remove the stabilizer from the last hooping because that will reduce the stabilizer “bulk”.

E. Roll the excess fabric in a tube shape and use clips to hold the excess fabric out of the way. This will prevent the fabric from accidently falling under the hoop.

F. As you place the hoop on the fabric remember the drawn lines on the fabric need not lie exactly under the lines of the grid, but must be parallel and perpendicular to the lines on the grid.

Tip #3: Unusual Embroidery Instructions (not so common in other patterns): A. Needle Alignment: This is placed first in the stitching order. It is strictly for needle placement and not to be

sewn out (unless indicated). If it is accidently sewn out it will look like a crosshair. Pick it out! B. Placement Line: This is usually a line that is to be sewn out without thread. It is an alignment tool for

connecting one hooping to another. C. The blank line after the thread color: Thread Purple #__________ (Write your thread Color # on the line)

It will help you remember what color you used when you return to embroidering. Tip #4: Ironing/Pressing

A. Place the embroidered background fabric wrong side up, over a cotton towel to iron. Ironing on the right side of embroidery will crush the embroidery stitches! Padding the stitches with a folded cotton towel wont’ crush them. I usually spay with starch and then press the fabric.

Tip #5: Trimming the Blocks A. For best accuracy, use a square ruler to trim all the blocks. Place the square ruler on the block lining up two

sides, then trim. Trimming with a 6” x 24” ruler is not as accurate and leads to slips and miss-cuts. If you have difficulty keeping a ruler from moving when you cut, place double sided tape on the side that goes against the fabric! Also, using quilting gloves helps to hold it in place!

Fabric Preparation Removing Dye:

Usually I do not wash my fabrics before embroidering or piecing them into a quilt. However, if I am using reds or greens I may want to test a piece to see if it is color fast. If it is not, you may want to treat the fabric with a product that will remove the excess dye. Quilt products such as Retayne and Synthrapol always work great.

Sizing or Starching the Fabric:

This process will pre-shrink your fabric and leave it with body making it perfect for cutting, piecing and embroidering. Spray starch over the fabric. Hold a hot iron on the fabric until the moisture dries. Don’t burn your fabric but hold it on long enough for it to dry. I always starch my fabric before embroidering on it.

Woven Interfacing:

First steam iron and starch the fabric. Then place the woven interfacing (Shape Flex 101 by Pellon) adhesive side down, on the wrong side of the fabric. Spray with water. Use your hands to smooth out the moistened Shape Flex over the fabric before using the steam iron. Set the steam iron on the center area of the Shape Flex and hold the iron long enough to dry & seal the two layers together, but not so long that it burns! Pick up the iron and place it close to the first spot. Repeat until all the interfacing is sealed to the fabric. This will “pre-shrink” both fabric and interfacing. The Shape Flex will shrink, that is expected. All the edges of the Shape Flex should be sealed to the fabric. If “air bubbles” are showing on the fabric, you need to spray with water and press again.

Fusible Fleece Option: Cut fusible fleece 3” or 4” larger, on all sides, than the cut fabric block. Center the fabric block (backed with Shape Flex) on the fusible fleece and use temporary adhesive spray to hold the fleece to the fabric. Don’t iron the “fusible” fleece because it doesn’t hold well by itself but the thickness and texture of the fusible fleece is perfect for reduction of puckering when embroidering. Optional unless indicated: sew close to the edge of the fabric all around the block to secure the layers together. The large border of fusible fleece acts as the stabilizer when hooping. It is soft and easy to hoop. After I hoop the fabric I will “float” or slide a piece of Tear Away Stabilizer under the attached hoop. It is much easier to hoop large pieces of fabric with fleece as a backing than it is to hoop large pieces of fabric with Tear Away Stabilizer! (I remove the “floated” Tear Away Stabilizer after each hooping.)




7

Stocking Block (10x14 Hoops)

All designs use Claudia’s Perfect Placement Technique to mark the grid with an arrow before hooping. To watch a demo go to: www.claudiascreationsaz.com select the Workshops tab & click Instructional Videos / Perfect Placement. The background fabric is cut 28” x 15” (wxh) See Cutting and Fabric Preparation Instructions Mark a center crosshair the full width and length of the fabric. Draw 3 Vertical lines: (2) 6” on either side of center (1) 9” to the right of center. Select the folder with the format your machine reads. Select 10x14 Hoop folder Open #1 Stockings folder / select #1 Polka Dot Stocking Attach the hoop and grid to the module (no fabric). Open Hoop #1 Polka Dot Stocking Step #1 Advance to the embroidery screen. Step #2 Lower the needle and lay an arrow shaped post it note

on the grid with the tip of the arrow touching the needle. (Refer to Steps #1 & #2 of “Tips for Successful Embroidery”)

To hoop Design #1, the fabric is positioned with the top of the block at the top.

Hoop the stabilized fabric with the arrow on the grid pointing to the center crosshair on the fabric.

See arrow in Example #1. Remove the grid from the hoop and attach the hoop to the module. Color #1 Needle Alignment.

The needle is over the center crosshair. Do not sew Color #1 (Needle placement only.) Advance to Color #2.

Thread Red # __________ (write your thread color here) Color #2 Embroider the pompoms, berries and candies. Thread Medium Blue # __________ Color #3 Embroider the ribbons and present. Thread Light Green # __________ Color #4 Embroider the polka dots on the stocking and the holly leaves. Thread Medium Green # __________

Color #5 Embroider the remaining holly leaves. Thread Dark Green # __________

Color #6 Embroider the pine sprigs.

Thread Black # __________ Color #7 Embroider the outlining.

Remove the fabric from the hoop.

Attach the hoop and grid to the module (no fabric). Open #2 Gingerbread Stocking folder Open Hoop #1 Gingerbread Stocking Step #1 Advance to the embroidery screen. Step #2 Lower the needle and lay an arrow shaped post it note

on the grid with the tip of the arrow touching the needle. (Refer to Steps #1 & #2 of “Tips for Successful Embroidery”)






8

Hoop the stabilized fabric with the arrow on the grid pointing to the crosshair 6” to the left of center on the fabric. See arrow in Example #2. Remove the grid from the hoop and attach the hoop to the module.

Color #1 Needle Alignment.

The needle is positioned over the crosshair 6” to the left of center. See Example #2. Do not sew Color #1 (Needle placement only.) Advance to Color #2.

Thread Red # __________

Color #2 Embroider the stripes, berries and candy cane. Thread Brown # __________

Color #3 Embroider the gingerbread man.

Thread Light Green # __________ Color #4 Embroider holly and Candlewicking dots.

Thread Medium Green # __________ Color #5 Embroider the remaining holly leaves. Thread Dark Green # __________




Attach the hoop and grid to the module (no fabric). Open #3 Present Stocking folder Step #1 Advance to the embroidery screen. Step #2 Lower the needle and lay an arrow shaped post it note

on the grid with the tip of the arrow touching the needle.

To hoop Design #1, fabric is positioned with the top of the block at the top.

Hoop the stabilized fabric with the arrow on the grid pointing to the crosshair 6” to the right of center on the fabric. See arrow in Example #3. Remove the grid from the hoop and attach the hoop to the module.

Color #1. Needle Alignment. The needle is positioned over the crosshair 6” to the right of center. See Example #3.

Do not sew Color #1. (Needle placement only.) Advance to Color #2. Thread Red # __________

Color #2 Embroider the berries, stripes, and candy cane. Thread Yellow # __________ Color #3 Embroider the dots on the present.

Thread Gold # __________ Color #4 Embroider the bow on the present. Thread Light Green # __________ Color #5 Embroider holly and Candlewicking dots.

Thread Medium Green # __________ Color #6 Embroider the remaining holly leaves. Thread Dark Green # __________







9

Attach the hoop and grid to the module (no fabric). Open #4 Mistletoe folder Open Hoop #1 Mistletoe Step #1 Advance to the embroidery screen. Step #2 Lower the needle and lay an arrow shaped post it note



Hoop the stabilized fabric with the arrow on the grid pointing to the crosshair 9” to the right of center on the fabric. See arrow in Example #4. Remove the grid from the hoop and attach the hoop to the module.


The needle is positioned over the crosshair 9” to the right of center. See Example #4.

Do not sew Color #1. (Needle placement only) Advance to Color #2. Thread Red # __________

Color #2 Embroider the ribbon. Thread Red or White # __________ Color #3 Embroider the berries.

Thread Light Green # __________ Color #4 Embroider the leaves. Thread Medium Green # __________ Color #5 Embroider the remaining leaves. Thread Black # __________ Color #6 Embroider the outlining.

Remove the fabric from the hoop. Your embroidery looks like this:

Cookies and Milk Block (10 x14 Hoops)

The background fabric is cut 13” x 15” (wxh) Draw a center crosshair the entire width and length of the fabric. Open #2 Cookies and Milk folder Attach the hoop and grid to the module (no fabric). Open Design #1 Cookies and Milk Step #1 Advance to the embroidery screen. Step #2 Lower the needle and lay an arrow shaped post it note on the grid with the tip of the arrow touching the needle. (Refer to “Tips for Successful Embroidery”) For Design #1 the fabric is positioned as pictured Hoop the stabilized fabric with the arrow on the grid pointing to the center crosshair on the fabric. Remove the grid and attach the hoop to the module. The stabilizer should always be larger than the hoop size even if the fabric is not! Color #1 Needle Alignment.

The needle is placed over the center of the crosshair. Do not sew Color #1 (Needle Placement) Advance to Color #2.




10

Thread Red # __________ Color #2 Embroider the red areas of the design. (Candy, lid, glass, and plate.) Thread Medium Blue # __________ Color #3 Embrorider the blue candies. Thread Light Blue (or White, Grey or Off White) # __________ Color #4 Embrorider the milk. Thread Medium Green # __________ or #5 Embroider the green candy and outline on the plate. Thread Purple # __________ Color #6 Embroider the purple candy stick. Thread Gold # __________ Color #7 Embroider the gum drop. Thread Brown # __________ Color #8 Embroider the cookies. Thread Black # __________ Color #9 Embroider the black outlining. Remove the fabric from the hoop.

Ornament Block (This design is for 10x15 Hoops. Use the 8x12 Hoops folder for 14” long Hoops)

The background fabric is cut 14” x 28”. Draw a center crosshair the entire width and length of the fabric. Additionally draw vertical lines 4” to the left and right of center. Attach the hoop and grid to the module (no fabric). Open #3 Ornament Block folder / 10x15 Hoops folder

Open Hoop #1 Center Right Ornaments Step #1 Advance to the embroidery screen. Step #2 Lower the needle and lay an arrow shaped post it note on the grid with the tip of the arrow touching the needle. (Refer to “Tips for Successful Embroidery”) To hoop Design #1 the fabric is positioned with the top of the block at the top. Hoop the stabilized fabric with the arrow on the grid pointing to the center crosshair on the fabric. See Example #1. Remove the grid and attach the hoop to the module. Color #1 Needle Alignment. The needle is placed over the center of the crosshair. See Example #1.

Do not sew Color #1. (Needle placement only) Advance to Color #2. Thread Gold # __________ Color #2 Embroider the ribbon. Thread Red # __________ Color #3 Embroider the large center ornament fill. Thread Medium Blue # __________ Color #4 Embroider the lower right ornament fill. Thread Light Green # __________ Color #5 Embroider the upper ornament. Thread Black # __________ Color #6 Embroider the outlining. Thread Dark Green # __________ Color #7 Embroider the pine needles. Remove the fabric from the hoop.




11

Attach the hoop and grid to the module (no fabric). Open Hoop #2 Upper Left Ornaments Step #1 Advance to the embroidery screen. Step #2 Lower the needle and lay an arrow shaped post it note on the grid with the tip of the arrow touching the needle. (Refer to “Tips for Successful Embroidery”)

To hoop Design #2 the fabric is positioned with the top of the block at the top. Hoop the stabilized fabric with the arrow on the grid pointing to the end of the black outlining on the lower left side of the large center ornament. See the start arrow in Example #2. Color #1 Placement Line.

The needle is positioned at the end of the black outlining on the lower left side of the large center ornament. See start arrow in Example #2. Sew Color #1 without thread. It will sew from the start to the end arrow following the outline of the ornament. Reposition if needed to sew on the outline. Re-thread. Advance to Color #2.

Thread Purple # __________ Color #2 Embroider the fill on the lower ornament. It embroiders over the green sprigs! Thread Gold # __________ Color #3 Embroider the highlights for the upper ornament. Thread Red # __________ Color #4 Embroider the fill on the upper ornament. Thread Black # __________ Color #5 Embroider the outlining. Thread Dark Green # __________ Color #6 Embroider the pine needles. Remove the fabric from the hoop. Attach the hoop and grid to the module (no fabric). Open Hoop #3 Candy Cane & Ornaments Step #1 Advance to the embroidery screen. Step #2 Lower the needle and lay an arrow shaped post it note on the grid with the tip of the arrow touching the needle. (Refer to “Tips for Successful Embroidery”)

To hoop Design #3 the fabric is positioned with the top of the block at the top.




12

Hoop the stabilized fabric with the arrow on the grid pointing to the sideways shape between the upper and middle sections of the center ornament. See arrow in Example #3. Remove the grid and attach the hoop to the module. Color #1 Needle Alignment. (Single point alignment only)

The needle is positioned at the pointed tip of the shape between the upper and middle sections of the center ornament. See Example #3. Do not sew Color #1. No need to sew a placement line. Advance to Color #2

Thread Light Green # __________ Color #2 Embroider the fill on the upper ornament. Thread Red # __________ Color #3 Embroider the fill on the candy cane. Thread Medium Blue # __________ Color #4 Embroider the fill on the lower ornament. Thread Black # __________ Color #5 Embroider the outlining. Thread Dark Green # __________ Color #6 Embroider the pine needles. Remove the fabric from the hoop. Attach the hoop and grid to the module (no fabric). Open Hoop #4 Lower Right Ornament

Step #1 Advance to the embroidery screen. Step #2 Lower the needle and lay an arrow shaped post it note on the grid with the tip of the arrow touching the needle. (Refer to “Tips for Successful Embroidery”)

To hoop Design #4 the fabric is positioned with the top of the block at the top.

Hoop the stabilized fabric with the arrow on the grid pointing to the green start arrow.

See start arrow in Example #4. Remove grid & attach the hoop to the module.

Color #1 Placement Line.

The needle is positioned at the start arrow see Example #4. Sew Color #1 without thread. It starts at the bottom of the first white stripe and sews downward to the end arrow. Re-thread. Advance to Color #2

Thread Yellow # __________ Color #2 Embroider the yellow inner part of the ornament. Thread Red # __________ Color #3 Embroider the fill for the ornaments. Thread Black # __________ Color #4 Embroider the outlining. Thread Dark Green # __________ Color #5 Embroider the pine needles.





13

Teddy Bear Block

(10x14 Hoops)

The background fabric is cut 28” x 15” (wxh)

Draw a center crosshair the entire width and length of the fabric.

Additionally draw vertical lines 6” to the left & right of the center.

Attach the hoop and grid to the module (no fabric).

Open #4 Teddy Bear Block folder

Open Design #1 Soldier, Top, and Present

Step #1 Advance to the embroidery screen. Step #2 Lower the needle and lay an arrow shaped post it note

on the grid with the tip of the arrow touching the needle marking

the 1st stitch of the design. (Refer to “Tips for Successful Embroidery”)

To hoop Design #1 the fabric is positioned with the top of the block on the right.

Hoop the stabilized fabric with the arrow on the grid pointing to the center crosshair

on the fabric. See Example #1. Remove the grid and attach the hoop to the module.


The needle is positioned over the center crosshair. Reposition if needed to be over the crosshair.

Do not sew Color #1 (Needle Placement). Advance to Color #2.

Thread Medium Blue #_________

Color #2 Embroider the bottom section of the toy top. Thread Light Blue #__________

Color #3 Embroider the top section of the toy top.

Thread Gold #__________

Color #4 Embroider the shoulder’s epaulette, hat, buckle & dots on the toy top.

Thread Yellow #__________

Color #5 Embroider the underside of the bow.

Thread Red #__________

Color #6 Embroider the crisscross straps and the soldier’s hat.

Thread Purple #__________

Color #7 Embroider the purple present.

Thread Light Green #__________

Color #8 Embroider the present. Thread Medium Green #__________

Color #9 Embroider the bow.

Thread Brown or Black # __________ Color #10 Embroider the soldier’s shirt.

Thread Black #__________

Color #11 Embroider the outlining, eyes, & x’s on the present.


Color #12 Embroider the red straps for the hat.





14

Open Design #2 Teddy Bear and Present

Step #1 Advance to the embroidery screen. Step #2 Lower the needle and lay an arrow shaped post it note

on the grid with the tip of the arrow touching the needle marking the 1st stitch of the design.

To hoop Design #2 the fabric is positioned with the top of the block on the right.

Hoop the stabilized fabric with the arrow on the grid pointing to the left end of the present

See Example #2. Remove the grid from the hoop and attach the hoop to the module. Color #1 Placement Line.

The needle is positioned at the left end

of the green present. See start arrow in

Example #2. Sew the placement line without

thread. It should sew directly over the outlining of

the green present stopping at the end arrow.

Re-thread. Advance to Color #2. Thread Red #__________

Color #2 Embroider the ribbon and berries. Thread Brown #__________

Color #3 Embroider the teddy bear.

Thread Medium Green #__________

Color #4 Embroider the holly leaves.


Color #5 Embroider the holly leaves & present.

Thread Dark Green #__________

Color #6 Embroider the pine sprigs. Thread Black #__________

Color #7 Embroider the outlining.





15

Snow Globe Block

(10 x 14 Hoops)

The background fabric is cut 13” x 13”.


Open #5 Snow Globe folder Attach the hoop and grid to the module (no fabric). Open Hoop #1 Snow Globe Step #1 Advance to the embroidery screen. Step #2 Lower the needle and lay an arrow shaped post it note

on the grid with the tip of the arrow touching the needle marking the 1st stitch of the

design. (Refer to “Tips for Successful Embroidery”) To hoop Design #1 the fabric is positioned with the top of the block on the right.

Hoop the stabilized fabric with the arrow on the grid pointing to the center

crosshair on the fabric. Sometimes the fabric will not cover all the area in the

hoop but the stabilizer must cover the entire hoop surface. Remove the grid and

attach the hoop to the module.

Color #1 Needle Placement. The needle is placed over the center of the crosshair.

Do not sew Color #1(Needle Placement). Advance to Color #2.

Thread Medium Blue # __________ Color #2 Embroider the sky. Thread Brown # __________ Color #3 Embroider the twigs on the snowman. Thread Orange # __________ Color #4 Embroider the nose. Thread Red # __________ Color #5 Embroider the berries, outside of globe, and stand. Thread Gold # __________ Color #6 Embroider the base of the globe. Thread Light Green # __________ Color #7 Embroider the Christmas Tree and holly leaves. Thread Medium Green # __________ Color #8 Embroider the remaining holly leaves. Thread Black # __________ Color #9 Embroider the outlining. Remove the fabric from the hoop.




16

Tree Topper (10x14 Hoops)

The background fabric is cut 13” x 13”.


Open #6 Tree Topper folder


Open Hoop #1 Tree Topper

Step #1 Advance to the embroidery screen.

Step #2 Lower the needle and lay an arrow shaped post it note


(Refer to “Tips for Successful Embroidery”)

For Design #1 the fabric is positioned with the top of the block at the top.

Hoop the stabilized fabric with the arrow on the grid pointing to the center

crosshair on the fabric. Remove the grid and attach the hoop to the module. Color #1 Needle Alignment.

The needle is posotioned over the center of the crosshair. See

Example #1. Do not sew Color #1. Advance to Color #2.

Thread Yellow # __________

Color #2 Embroider the lighter star points.

Thread Gold # __________

Color #3 Embroider the darker star points. Thread Brown # __________

Color #4 Embroider the tree trunk.

Thread Medium Blue # __________

Color #5 Embroider the tree holder.

Thread Red # __________

Color #6 Embroider the berries

Thread Black # __________


Thread Dark Green # __________

Color #8 Embroider the greenery.





17

Word Sashing Strips (10x15 Hoops)

Fabric strips are cut: (3 strips) 5” x width of fabric: Press/iron woven interfacing to the back of each strip. (Refer to Tips for Successful Embroidery) Sub cut (2) strips into: (4 pieces) 5” x 20” Sub cut (1) strip into: (1 piece) 5” x 26”

Draw a center crosshair the entire width and length of each fabric strip. Be accurate!

Each fabric strip is positioned vertically for hooping.

Open #7 Word Sashing Strips folder / 10x15 Hoops folder Attach the hoop and grid to the module (no fabric). Open Hoop #1 Peace on Step #1 Advance to the embroidery sewing screen. Step #2 Lower the needle and lay an arrow shaped post it note on the grid with the tip of the arrow touching the needle.

Select the 5” x 26” strip of fabric. Cut stabilizer 4” longer than the fabric strip and 4” wider

than the hoop size. Center the fabric on the stabilizer using adhesive spray.

Hoop the stabilized fabric with the arrow on the grid pointing to the center crosshair on the

fabric. Remove the grid and attach the hoop to the module. Slide/float a second piece of

heavyweight stabilizer under the hoop. Color #1 Needle Alignment.

The needle is directly over the center crosshair on the fabric strip.

Do not sew Color #1 (Needle Placement). Advance to Color #2. Thread Red #_

Color #2 Embroider the design.

A basting box will embroider first and then the words. Remove the basting stitches and the fabric from the hoop.


Open Hoop #2 Earth Step #1 Advance to the embroidery sewing screen. Step #2 Lower the needle and lay an arrow shaped post it note on the grid with the tip of the arrow touching the needle. Hoop the stabilized fabric with the arrow on the grid pointing to the center crosshair on the fabric

strip. Remove the grid and attach the hoop to the module. Slide a second piece of heavyweight

stabilizer under the hoop. Color #1 Needle Alignment.

The needle is positioned over the center crosshair on the fabric strip.

Do not sew Color #1 it is for needle placement only.

Reposition if needed to be over the crosshair. Advance to Color #2. Thread Red #_

Color #2 Embroider the basting box and the word. Remove the basting stitches and fabric from the hoop.




18

Select a 5” x 20” strip of fabric. Center the fabric on the stabilizer in the same way as the first word sashing strip. Attach the hoop and grid to the module (no fabric).

Open Hoop #3 Merry Christmas Step #1 Advance to the embroidery sewing screen. Step #2 Lower the needle and lay an arrow shaped post it note on the grid with the tip of the arrow touching the needle.

Hoop the stabilized fabric with the arrow on the grid pointing to the center crosshair on the fabric. Remove the grid

and attach the hoop to the module. Slide a second piece of heavyweight stabilizer under the hoop. Color #1 Needle Alignment.

The needle is directly over the center crosshair on the fabric strip.

Do not sew Color #1 it is for needle placement only.

Advance to Color #2. Thread Red #_

Color #2 Embroider the basting box and words.

Remove the basting stitches and fabric from the hoop.

Select a 5” x 20” strip of fabric. Center the fabric on the stabilizer in the same way as the first word sashing strip. Attach the hoop and grid to the module (no fabric).

Open Hoop #5 Tis the SEASON Step #1 Advance to the embroidery sewing screen. Step #2 Lower the needle and lay an arrow shaped post it note on the grid with the tip of the arrow touching the needle. Hoop the stabilized fabric with the arrow on the grid pointing to the center crosshair on the fabric. Remove the grid

and attach the hoop to the module. Slide heavyweight stabilizer under the hoop where the words will embroider.


The needle is positioned over the center crosshair on the fabric strip.

Do not sew Color #1 it is for needle placement only. Advance to Color #2. Thread Red #_

Color #2 Embroider the basting box and the words.

Remove the basting stitches and the fabric from the hoop.




19

Select a 5” x 20” strip of fabric. Center the fabric on the stabilizer in the same way as the first word sashing strip. Attach the hoop and grid to the module (no fabric). Open Hoop #7 Joy to the World Step #1 Advance to the embroidery sewing screen. Step #2 Lower the needle and lay an arrow shaped post it note on the grid with the tip of the arrow touching the needle.


Remove the grid and attach the hoop to the module. Slide heavyweight stabilizer under the hoop where

the words will embroider.


The needle is positioned over the center crosshair.

Do not sew Color #1 (Needle Placement). Advance to Color #2. Thread Red #_



Select a 5” x 20” strip of fabric. Center the fabric on the stabilizer in the same way as the first word sashing strip.


Open Hoop #10 NOEL Step #1 Advance to the embroidery sewing screen. Step #2 Lower the needle and lay an arrow shaped post it note on the grid with the tip of the arrow touching the needle. (Refer to “Tips for Successful Embroidery”)


Remove the grid and attach the hoop to the module. The hooped fabric looks like this.


The needle is positioned over the center crosshair. Do not sew Color #1 (Needle Placement). Advance to Color #2.

Thread Red #_



.




20

Embroidered Word Borders

Background B fabric: (fabric for Wording) Cut (2) strips 3” x width of fabric Red Fabric: Cut (1) strip 2” x width of fabric. Cut (2) strips 5 ½” x width of fabric Strip Piecing: Place (1) Background B strip and (1) red fabric strip, right sides together, sew a ¼” seam the length of the fabric. Finger press the seam to the darker fabric and starch and press. Sew the remaining Background B strip to the red strip. Finger press to the darker fabric and starch the seam. Should measure 7” x 40” (or width of fabric) (Make sure it is 7” wide not narrower or wider)

Sub cut this Unit into (15) 2” x 7” rectangles. Stagger the rectangles to form a stair step. The tops are not straight across. Lay one rectangle offset on top of another, right sides together, with the bottom of one red seams butting up against the top of the other red seam. The red seams should butt up and nestle together. Sew the long seam. (All seams are scant quarter inch.) Make sure the seams don’t flip to the wrong side. They need to be opposing seams so they butt up to each other. Make (6) of these Units. Sub cut (9) 5 ½” squares from the Background B 5 ½” x wof strips. Cut in half once, diagonally (on the bias). Center the bias edge (diagonal cut) against the edge of the pieced Unit. Sew a triangle on each side of the pieced Units. Sew a triangle on each side of the single Units, too.




21

Rotate the Units so the squares are on point. To Trim the Width of the Seminole Unit: Trim both sides 1 ¾” to the right and left of center. Repeat this process for all (6) double and (3) single Units. The cut width should measure 3 ½” wide.

To trim the Length of the Seminole Unit: Rotate the Unit 90° to the right; center and trim the single pieced Seminole Unit 3 ½” square.

Center and trim the double unit to 5 ¾” x 3 ½” Embroidered Word Borders: Trimming the Width: Mark the long vertical center of the word strip with a removable pen. Trim both sides of the strip, 1 ¾” to the right and left of that center line. The embroidered strip will be trimmed to measure 3 ½” wide. Trimming the Length: Center and trim the embroidered word strips to the following measurements: Merry Christmas 3 ½” x 16” Tis the Season 16 ¼” x 3 ½” Joy to the World 3 ½” x 17 ¼” Peace on Earth 19 ¼” x 3 ½” Noel 3 ½” x 6 ¼” With right sides together, place the short trimmed edge of the Seminole Unit to the short trimmed edge of the embroidered word border. Pin the short straight edges together and sew. Repeat for each of the embroidered word border strips. The length of each Word/Seminole strip is below. (Seam allowance is included.)

Refer to these pictures for placement of the double and single units. Continue following the Piecing the Quilt instructions.




22

Tis the Season Piecing the Center Section of the Quilt

Trim and Square the Embroidered Blocks: All seams are scant quarter inch. (Scant quarter: width of the needle smaller than a perfect quarter inch) Each block should be pressed with sizing or starch (on the backside to protect the embroidery) before trimming. Draw the “cut lines” with a removable marker before trimming to prevent mistakes!!! Square and trim each block to the following sizes: Stocking Block 26 ½” x 13 ½ (wxh = width x height) Ornaments Block 12 ½” x 24 ½” Tree Topper Block 11 ½” x 11 ½” Cookies & Milk Block 11 ½” x 13 ½” Teddy Bear Block 25 ½” x 10 ½ Snow Globe Block 11 ½” x 11 ½” Stocking Block & Merry Christmas word border blocks: Center and pin the top edge of the pieced and embroidered “Merry Christmas” word border to the bottom of the Stocking Block. Right sides of the fabric together. Pin every 3” to avoid stretching. Sew the blocks together. Finger press then press and starch the seams to the stocking block. Unit measures 26 ½” x 16 ½” (wxh). Ornament & Tis the Season word border blocks: Center and pin the left side of the pieced and embroidered “Tis the Season” word border to the right side of the Ornament Block with right sides of the fabric together. Pin every 3” to avoid stretching. Sew the blocks together. Finger press then press and starch the seams toward the Ornament block. Unit measures 15 ½” x 24 ½” (wxh). Tree Topper/Cookies & Milk & Noel border blocks: Center and pin the top of the pieced and embroidered “Noel” word border to the bottom of the Tree Topper Block with right sides of the fabric together. Pin every 3” to avoid stretching. Sew the blocks together. Finger press then press and starch the seams to the Tree Topper block. Pin the top edge of the Cookies and Milk block to the bottom edge of the “Noel” border, with the right sides together. Pin every 3” to avoid stretching. Sew the blocks together. Finger press then press and starch the seams to the Cookies and Milk block. Unit measures 11 ½” x 27 ½” (wxh).

Adding the Peace on Earth word border block: Center and pin the right side of the pieced and embroidered “Peace on Earth” word border to the left side of the Tree Topper/Cookies & Milk block with the right sides together. Pin every 3” to avoid stretching. Sew the blocks together. Finger press then press and starch the seams to the embroidered blocks. Peace on Earth Unit measures 14 ½” x 27 ½” (wxh).




23

Teddy Bear and Joy to the World blocks: Center and pin the bottom edge of the pieced and embroidered “Joy to the World” to the top of the Teddy Bear block. Right sides of the fabric together. Pin every 3” to avoid stretching. Sew the blocks together. Finger press then press and starch the seams to the embroidered block. Unit measures 25 ½” x 13 ½”. Snow Globe & Peace on Earth Unit: Flip the Snow Goble block to the side to expose the wrong side up. Match the bottom and the left edge of the Peace on Earth Unit with the bottom and left edge of the (wrong side up) Snow Globe block. Pin every 3” to avoid stretching. Start sewing at the bottom corner and stop 3” before the top end of the snow globe block creating a partial seam. Finger press then press and starch the seam open. The bottom of this Unit measures 25 ½” wide.

Joy to the World & Peace on Earth Unit: Flip the Joy to the World block wrong side up. Match the bottom, left and right edges of the Peace on Earth Unit with the bottom, left, and right edges of the (wrong side up) Joy to the World block. Pin every 3” to avoid stretching. Sew the bottom seam Press and starch the seams to the embroidered block. The bottom of this Unit measures 25 ½” wide.

Tis the Season & Peace on Earth Units: Flip the Tis the Season Unit sideways so it is wrong side up. Match the left and bottom edges of the Tis the Season Unit with the left and bottom edges of the Peace on Earth Unit, right sides together. Pin every 3” to avoid stretching. Sew the left side edge. Press and starch the seams to the embroidered Unit. Unit measures 39 ½”.




24

Merry Christmas & Peace on Earth Units: Flip the Merry Christmas Unit down exposing the wrong side up. Match the top edge of the Merry Christmas Unit with the top edge of the Peace on Earth Unit, right sides together. Pin every 3” to avoid stretching. Sew the left side edge. Press and starch the seams to the embroidered block.

Fold the quilt top, right sides together, to the unsewn seam. Pin the blocks together every 3” and finish sewing the partial seam. Press and starch the seams to the embroidered block.

Please stop and make sure the quilt measures 40 ½” x 40 ½” square. If it does not, take the time now to adjust the seams so it is square! It will not become square with more borders!!

Red Inner Borders: (2) 2 ½” x 40 ½” Sew an Inner Border to the top and bottom of the quilt. Press the seams to the inner borders.

(2) 2 ½” x 44 ½” Sew an Inner Border to both sides of the quilt. Press the seams to the inner borders. Quilt measures 44 ½” square. The quilt top must be square before adding the embroidered borders.




25

Tis the Season Embroidery Instructions for Borders (Hoops 14” Long)

(Please check my website for any embroidery tips, updates or corrections to the pattern before beginning.) www.claudiascreationsaz.com

Borders strips are cut: (2) Border strips 9” x 48” (sides) (2) Border strips 9” x 64” (top and bottom) Mark a center crosshair on each strip the full length and width. Also mark a horizontal line on the shorter strips 7” on either side of center.

Open #8 Embroidered Borders folder / 10 x 14 Hoops folder Select #1 Side Borders folders


Open Hoop #1 Left side Bells Step #1 Advance to the embroidery screen.




The border strips will be hooped in the vertical position (as diagramed above) for all the borders. Select a side border (9” x 48”) strip. (This will be the left side border.)

Hoop the stabilized fabric with the arrow on the grid pointing to the crosshair 7” below the center crosshair. See Example #1. The drawn lines on the fabric must be parallel and perpendicular to the lines on the grid. Remove the grid from the hoop and attach the hoop to the module. Color #1 Needle Alignment.

The needle is positioned over the crosshair 7” below the center. Do not sew Color #1. (Needle placement only)

Adding the basting box if you have the option: After marking the grid with the post it note arrow (indicating the first stitch of the design) add the built in basting box option from your machine. Sew out the basting box and then turn the basting box option off. Leaving the basting box option on may add a thread color to my list colors below. For instance: There are 8 thread colors for this hooping. If you see 9 thread colors on your screen the basting box option is still on and has added a color! Turn it off so you have 8 thread colors. Advance to color #2. Thread Gold #__________ Color #2 Embroider the ribbon. Thread Red #__________ Color #3 Embroider the candies, berries, and bells. Thread Blue #__________ Color #4 Embroider the candy. Thread Light Green #__________ Color #5 Embroider the holly leaves. Thread Medium Green #__________ Color #6 Embroider the holly leaves. Thread Dark Green #__________ Color #7 Embroider the pine sprigs. Thread Black #_________ Color #8 Embroider the outlining. Remove the fabric from the hoop.





26

Attach the hoop and grid to the module (no fabric). Open Hoop #2 Left side Gingerbread Man Step #1 Advance to the embroidery screen.




Hoop the stabilized fabric with the arrow on the grid pointing to the crosshair 7” above the center crosshair. See Example #2. Remove the grid from the hoop and attach the hoop to the module. Color #1 Needle Alignment.

The needle is positioned over the crosshair 7” above the center crosshair on the fabric. Do not sew Color #1. (Needle placement only) Advance to color #2.

Thread Gold #__________ Color #2 Embroider the ribbon. Thread Red #__________ Color #3 Embroider the candies and berries. Thread Purple #__________ Color #4 Embroider the candy. Thread Blue # __________ Color #5 Embroider the candy. Thread Brown # __________ Color #6 Embroider the gingerbread man. Thread Light Green #__________ Color #7 Embroider the holly leaves. Thread Medium Green #__________ Color #8 Embroider the holly leaves. Thread Dark Green #__________ Color #9 Embroider the pine sprigs. Thread Black #_________ Color #10 Embroider the outlining. Remove the fabric from the hoop.

Select the remaining side border (9” x 48”) strip. (This will be the right side border.)

Attach the hoop and grid to the module (no fabric). Open Hoop #3 Right side Gingerbread Man Step #1 Advance to the embroidery screen.




Hoop the stabilized fabric with the arrow on the grid pointing to the lower crosshair 7” below the center. See Example #3. The drawn lines on the fabric need not be on the lines of the grid, but must be parallel and perpendicular to the lines on the grid. Remove the grid from the hoop and attach the hoop to the module. Color #1 Needle Alignment.

The needle is positioned over the crosshair 7” below the center crosshair. See Example #3. Do not sew Color #1. (Needle placement only) Advance to Color #2.

Thread Gold #__________ Color #2 Embroider the ribbon.




27

Thread Red #__________ Color #3 Embroider candies and berries. Thread Purple #__________ Color #4 Embroider the candy. Thread Blue # __________ Color #5 Embroider the candy. Thread Brown # __________ Color #6 Embroider the gingerbread man. Thread Light Green #__________ Color #7 Embroider the holly leaves. Thread Medium Green #__________ Color #8 Embroider the holly leaves. Thread Dark Green #__________ Color #9 Embroider the pine sprigs. Thread Black #_________ Color #10 Embroider the outlining. Remove the fabric from the hoop.

Attach the hoop and grid to the module (no fabric). Open Hoop #4 Right Side Bells (The bells are facing to the left.) Step #1 Advance to the embroidery screen.



(Refer to “Tips for Successful Embroidery”

Hoop the stabilized fabric with the arrow on the grid pointing to the upper crosshair 7” above the center. See Example #4. Remove the grid from the hoop and attach the hoop to the module. Color #1 Needle Alignment.

The needle is positioned over the crosshair 7” above the center. See Example #4. Do not sew Color #1 (Needle placement only). Advance to Color #2.

Thread Gold #__________ Color #2 Embroider the ribbon. Thread Red #__________ Color #3 Embroider the candies, berries, and bells. Thread Blue#__________ Color #4 Embroider the candy. Thread Light Green #__________ Color #5 Embroider the holly leaves. Thread Medium Green #__________ Color #6 Embroider the holly leaves. Thread Dark Green #__________ Color #7 Embroider the pine sprigs. Thread Black #_________ Color #8 Embroider the outlining. Remove the fabric from the hoop. .

Attach the hoop and grid to the module (no fabric). Open #2 Bottom Center Border folder Open Hoop #1 Center Bells Step #1 Advance to the embroidery screen.

Step #2 Lower the needle and lay an arrow shaped post it note on the grid with the tip of the arrow

touching the needle.




28

Hoop the stabilized fabric with the arrow on the grid pointing to the center crosshair. See Example #5. The drawn lines on the fabric need not be on the lines of the grid, but must be parallel and perpendicular to the lines on the grid. Remove the grid from the hoop and attach the hoop to the module. Color #1 Needle Alignment.

The needle is positioned over the center crosshair. See Example #5. Do not sew Color #1 (Needle placement only). Advance to Color #2.

Thread Gold #__________ Color #2 Embroider the ribbon. Thread Red #__________ Color #3 Embroider the berries and bells. Thread Brown #__________ Color #4 Embroider the gingerbread man. Thread Light Green #__________ Color #5 Embroider the holly leaves. Thread Medium Green #__________ Color #6 Embroider the holly leaves. Thread Dark Green #__________ Color #7 Embroider the pine sprigs. Thread Black #_________ Color #8 Embroider the outlining. Remove the fabric from the hoop.

Attach the hoop and grid to the module (no fabric). Open Hoop #2 Gingerbread Man Step #1 Advance to the embroidery screen.



Hoop the stabilized fabric with the arrow on the grid pointing to the intersection of the outlining between the ribbon and the bell. See start Example #6. Remove the grid from the hoop and attach the hoop to the module. Color #1 Placement Line.

The needle is positioned at the start arrow. See Example #6. Sew the Placement Line without thread. It sews over the outlining of the ribbon to the end arrow. Re-thread. Advance to Color #2.

Thread Gold #__________ Color #2 Embroider the ribbon. Thread Red #__________ Color #3 Embroider the berries and bells. Thread Brown #__________ Color #4 Embroider the gingerbread man. Thread Light Green #__________ Color #5 Embroider the holly leaves. Thread Medium Green #__________ Color #6 Embroider the holly leaves. Thread Dark Green #__________ Color #7 Embroider the pine sprigs. Thread Black #_________ Color #8 Embroider the outlining. Remove the fabric from the hoop.




29

Attach the hoop and grid to the module (no fabric). Open #3 Top Center Border folder Open Hoop #1 Center Ornaments Step #1 Advance to the embroidery screen.



Hoop the stabilized fabric with the arrow on the grid pointing to the center crosshair. See Example #7. Remove the grid from the hoop and attach the hoop to the module. Color #1 Needle Alignment.

The needle is positioned over the center crosshair. See Example #7. Do not sew Color #1 (Needle placement only). Advance to Color #2.

Thread Gold #__________ Color #2 Embroider the ribbon. Thread Red #__________ Color #3 Embroider the berries. Thread Blue #__________ Color #4 Embroider the ornament. Thread Purple #__________ Color #5 Embroider the ornament. Thread Brown #__________

Color #6 Embroider the gingerbread man. Thread Light Green #__________ Color #7 Embroider the holly leaves. Thread Medium Green #__________ Color #8 Embroider the holly leaves. Thread Dark Green #__________ Color #9 Embroider the pine sprigs. Thread Black #_________ Color #10 Embroider the outlining. Remove the fabric from the hoop.

Attach the hoop and grid to the module (no fabric). Open Hoop #2 Gingerbread Woman Step #1 Advance to the embroidery screen.



(Refer to Steps #1 & #2 “Tips for Successful Embroidery”.) Hoop the stabilized fabric with the arrow on the grid pointing to the intersection of the outlining between the ribbon and the bell. See start Example #8. Remove the grid from the hoop and attach the hoop to the module. Color #1 Placement Line.

The needle is positioned at the start arrow. See Example #8. Sew the Placement Line without thread. It will sew over the outlining of the ribbon from the start to the end arrow. Re-thread. Advance to Color #2.




30

Thread Gold #__________ Color #2 Embroider the ribbon. Thread Red #__________ Color #3 Embroider the berries and bells. Thread Brown #__________ Color #4 Embroider the gingerbread woman. Thread Light Green #__________ Color #5 Embroider the holly leaves. Thread Medium Green #__________ Color #6 Embroider the holly leaves. Thread Dark Green #__________ Color #7 Embroider the pine sprigs. Thread Black #_________ Color #8 Embroider the outlining.

Tis the Season Piecing the Embroidered Borders

Trimming the Embroidered Borders: All seams are scant quarter inch. Each border should be pressed with sizing or starch (on the backside to protect the embroidery) before trimming. To avoid mistakes, draw the “cut lines” with a removable pen before trimming. Side Borders: Center the embroidered designs on the border strip. Trim the width of the strips to 7 ¾”.

(You will be trimming about ½” +/- on either side.)

Trim the length to 44 ½” (same length as the center section). Pin frequently and sew the Left Border side strip to the left side of the center section. Press the seams toward the center. Pin and sew the Right Border side strip to the right side of the center section. Press the seam towards the center. The quilt top measures 59” x 44 ½” (wxh) Top & Bottom Borders: Rotate the strips so the embroidery is in the vertical position. Center the embroidered design on the border strip. (You will be

trimming about ½” +/- on either side.)

Trim the width of the strip to 7 ¾” x 59” Sew the Bottom Border strip to the bottom of the center section. Press the seam towards the center.




31

Sew the Top Border strip to the top of the center section. Press the seam towards the center. The quilt top measures 59” x 59” square. Outer Border Christmas Fabric: Cut the side strips 3 ½”x 59”. Sew the side strips to the quilt. Cut the top and bottom strips 3 ½” x 65”. Sew the top to the top and the bottom to the bottom of the quilt. Press the seams outward. Measures 65” x 65” square Continue by following the Embroidery Instructions for the corners.

Embroidering the Corner Motifs

Select #4 Corner Borders folder Open #1 Bottom Right Corner / 10x14 Hoops folder

Open #1 Gingerbread Man Step #1 Advance to the embroidery sewing screen.



(Refer to Steps #1 & #2 “Tips for Successful Embroidery”.) Draw a new crosshair on each corner of the quilt top. Draw a vertical line 1” away from the inner border. The horizontal line is a continuation of the seam line. The first corner to be embroidered will be the bottom right corner. Use clips to keep the fabric from sliding under the hoop and out of your way.

Hoop the stabilized fabric with the arrow on the grid pointing to the crosshair in the lower right hand corner. See Example #1. The drawn lines on the fabric must be parallel and perpendicular to the lines on the grid. Remove the grid from the hoop and attach the hoop to the module. Color #1 Needle Alignment.

The needle is positioned over the new crosshair 1” to the right of the inner border seam and on the horizontal seam. Do not sew Color #1 (needle placement only).

Adding the basting box option: After marking the grid with the post it note arrow (indicating the first stitch of the design) add the built in basting box option from your machine. Sew out the basting box and then turn the basting box option off. Leaving the basting box option on may add a thread color to my list of colors below. For instance: There are 9 thread colors for this hooping. If you see 10 thread colors on your screen the basting box option is still on and has added a color! Turn it off so you have 9 thread colors. Do not sew Color #1. Advance to color #2.




32

Thread Gold #__________ Color #2 Embroider the ribbon. Thread Red #__________ Color #3 Embroider the candies and berries. Thread Purple #__________ Color #4 Embroider the candy. Thread Brown #__________ Color #5 Embroider the gingerbread man. Thread Light Green #__________ Color #6 Embroider the holly leaves. Thread Medium Green #__________ Color #7 Embroider the holly leaves. Thread Dark Green #__________ Color #8 Embroider the pine sprigs. Thread Black #_________ Color #9 Embroider the outlining. Remove the fabric from the hoop.

Rotate the fabric so it is positioned with the top on the left for the next hooping. Open Hoop #2 Gingerbread Woman Step #1 Advance to the embroidery sewing screen.



Hoop the stabilized fabric with the arrow on the grid pointing to the end of the outlining next to the berries. See start arrow in Example #2. Remove the grid from the hoop and attach the hoop to the module. Color #1 Placement Line.

The needle is positioned at the end of the outlining next to the berries. See start arrow in Example #2. Sew the Placement Line without thread. It sews on down the outlining turning upward to the end arrow. Re-thread. Advance to Color #2.

Thread Brown #__________ Color #2 Embroider the gingerbread woman.

The gingerbread woman embroiders about ¼” from the previously embroidered gold ribbon. They should not touch.

Thread Gold #__________ Color #3 Embroider the ribbon. Thread Red #__________ Color #4 Embroider the berries and candy. Thread Blue #__________ Color #5 Embroider the candy Thread Light Green #__________ Color #6 Embroider the holly leaves. Thread Medium Green #__________ Color #7 Embroider the holly leaves. Thread Dark Green #__________ Color #8 Embroider the pine sprigs. Thread Black #_________ Color #9 Embroider the outlining. Remove the fabric from the hoop.




33

Open #2 Upper Right Corner folder

Open #1 Star Ornament Step #1 Advance to the embroidery sewing screen.



You will be embroidering the upper right corner. Use clips to keep the fabric from sliding under the hoop and out of your way. For Design #1 the fabric is positioned with the top of the block on the top.

Hoop the stabilized fabric with the arrow on the grid pointing to the crosshair in the upper right hand corner. See Example #3. The drawn lines on the fabric must be parallel and perpendicular to the lines on the grid. Remove the grid from the hoop and attach the hoop to the module. Color #1 Needle Alignment.

The needle is positioned over the new crosshair 1” to the right of the inner border seam and on the horizontal seam. Do not sew Color #1 (needle placement only).

Adding the basting box option: After marking the grid with the post it note arrow (indicating the first stitch of the design) add the built in basting box option from your machine. Sew out the basting box and then turn the basting box option off. Do not sew Color #1 (Needle Placement). Advance to Color #2. Thread Gold #__________ Color #2 Embroider the ribbon. Thread Red #__________ Color #3 Embroider the candies and berries. Thread Blue #__________ Color #4 Embroider the candy. Thread Light Green #__________ Color #5 Embroider the holly leaves. Thread Medium Green #__________ Color #6 Embroider the holly leaves. Thread Dark Green #__________ Color #7 Embroider the pine sprigs. Thread Black #_________ Color #8 Embroider the outlining. Remove the fabric from the hoop.

Select #2 Upper Right Corner folder


Open Design #1 Star Ornament

Step #1 Advance to the embroidery sewing screen. Step #2 Lower the needle and lay an arrow shaped post it note on the grid with the tip of the arrow touching the needle. (Refer to “Tips for Successful Embroidery”)

For Design #1 the fabric is positioned with the top of the quilt at the top.




34

Hoop the stabilized fabric with the arrow on the grid pointing to the new crosshair

in the upper right corner. See start arrow in Example #6. Remove the grid from the

hoop and attach the hoop to the module.


The needle is positioned over the crosshair in the upper right corner of

the quilt top. See arrow in Example #6. Do not sew Color #1. (Needle

placement only) Advance to Color #2. Thread Gold #__________

Color #2 Embroider the ribbon.


Color #3 Embroider the berries.

Thread Blue #_________

Color #4 Embroider the candy.


Color #5 Embroider the holly.



Thread Dark Green #_________

Color #7 Embroider the pine needles.

Thread Black #_________




Open Design #2 Red Ornament


For Design #2 the fabric is positioned with the top of the quilt on the

right. This rotation of the quilt top places the excess fabric away from the

neck of the machine.

Hoop the stabilized fabric with the arrow on the grid pointing to the

intersection of the

pine sprigs and the ribbon. See start arrow in Example #7.

Remove the grid from the hoop and attach the hoop to the module.

Color #1 Placement Line. The needle is positioned at the start

arrow. See start arrow in Example #7. Sew the

Placement Line without thread. It will sew upward on

the outlining of the ribbon to the end arrow.

Reposition if needed to sew on the outlining.

Re-thread. Advance to Color #2.




35

Thread Gold #__________



Color #3 Embroider the berries. Thread Light Green #__________




Thread Dark Green #_________ Color #6 Embroider the pine needles.





Open Hoop #3 Ribbon and Candy


For Design #3 the fabric is positioned with the top of the quilt on the right.

Hoop the stabilized fabric with the arrow on the grid pointing to the tip of

the black outlining on the ribbon. See start arrow in Example #8. Remove

the grid from the hoop and attach the hoop to the module.

Color #1 Placement Line. The needle is positioned at the start arrow

see Example #8. Sew the placement line without thread. It

sews from the start to the end arrow. Advance to Color #2. Thread Gold #__________



Color #3 Embroider the berries. Thread Blue #__________

Color #4 Embroider the candy. Thread Light Green #__________




Thread Dark Green #_________ Color #7 Embroider the pine needles.







36

Attach the hoop and grid to the module (no fabric) Open Hoop #2 Gingerbread Man Step #1 Advance to the embroidery sewing screen.


on the grid with the tip of the arrow touching the needle To hoop Design #2 the top of the quilt is on the right. Hoop the stabilized fabric with the arrow on the grid pointing to the end of the outlining and the ribbon. See start arrow in Example #6. Remove the grid from the hoop and attach the hoop to the module. Color #1 Placement Line.

The needle is positioned at the left end of the outlining on the ribbon. See start arrow in Example #6. Sew the Placement Line without thread. It will sew on the outlining from the start to the end arrow. Reposition if needed to sew on the outlining. Re-thread. Advance to Color #2.

Thread Gold #__________ Color #2 Embroider the ribbon. Thread Red #__________ Color #3 Embroider the berries and candy. Thread Blue #__________ Color #4 Embroider the candy. Thread Brown #__________ Color #5 Embroider the gingerbread man. Thread Light Green #__________ Color #6 Embroider the holly leaves. Thread Medium Green #__________ Color #7 Embroider the holly leaves. Thread Dark Green #__________ Color #8 Embroider the pine sprigs. Thread Black #_________ Color #9 Embroider the outlining. Remove the fabric from the hoop. Attach the hoop and grid to the module (no fabric) Open #4 Bottom Left Corner folder Open #1 Ornament Step #1 Advance to the embroidery sewing screen.


on the grid with the tip of the arrow touching the needle




37

To hoop Design #1 position the quilt top upside down. You will now be embroidering the upper right corner!

Hoop the stabilized fabric with the arrow on the grid pointing to the crosshair in the lower right hand corner. See Example #7. The drawn lines on the fabric must be parallel and perpendicular to the lines on the grid. Remove the grid from the hoop and attach the hoop to the module. Color #1 Needle Alignment.

The needle is positioned over the new crosshair 1” to the right of the inner border seam and on the horizontal seam. Do not sew Color #1 (needle placement only). Advance to color #2.

Thread Gold #__________ Color #2 Embroider the ribbon. Thread Red #__________ Color #3 Embroider the candy and berries. Thread Blue #__________ Color #4 Embroider the ornament. Thread Purple #__________ Color #5 Embroider the ornament. Thread Light Green #__________ Color #6 Embroider the holly leaves. Thread Medium Green #__________ Color #7 Embroider the holly leaves. Thread Dark Green #__________ Color #8 Embroider the pine sprigs. Thread Black #_________ Color #9 Embroider the outlining. Remove the fabric from the hoop. . Attach the hoop and grid to the module (no fabric) Open Hoop #2 Ribbon and Candies Step #1 Advance to the embroidery sewing screen.


on the grid with the tip of the arrow touching the needle To hoop Design #2 the quilt is positioned with the top of the quilt on the left.




38

Hoop the stabilized fabric with the arrow on the grid pointing to the intersection of the holly leaf and the ribbon. See start arrow in Example #8. Remove the grid from the hoop and attach the hoop to the module. Color #1 Placement Line.

The needle is positioned at the intersection of the holly leaf and the ribbon. See start arrow in Example #8. Sew the Placement Line without thread. It will sew on the outer edge of the ribbon from the start to the end arrow. Reposition if needed to sew on the edge of the fill. Re-thread. Advance to Color #2.

Thread Gold #__________ Color #2 Embroider the ribbon. Thread Red #__________ Color #3 Embroider the candy and berries. Thread Purple #__________ Color #4 Embroider the ornament. Thread Blue #__________ Color #5 Embroider the ornament. Thread Light Green #__________ Color #6 Embroider the holly leaves. Thread Medium Green #__________ Color #7 Embroider the holly leaves. Thread Dark Green #__________ Color #8 Embroider the pine sprigs. Thread Black #_________ Color #9 Embroider the outlining. Remove the fabric from the hoop. Gently remove the stabilizer from the back.


tis the season - Amazon Web...

Documents

Transcript of tis the season - Amazon Web...