TIP122-STMicroelectronics
-
Upload
zhalim2001 -
Category
Documents
-
view
214 -
download
0
Transcript of TIP122-STMicroelectronics
-
8/6/2019 TIP122-STMicroelectronics
1/13
November 2008 Rev 4 1/13
13
TIP120, TIP121, TIP122TIP125, TIP126, TIP127
Complementary power Darlington transistors
Features Low collector-emitter saturation voltage Complementary NPN - PNP transistors
Applications
General purpose linear and switching
DescriptionThe devices are manufactured in planartechnology with base island layout andmonolithic Darlington configuration. The resultingtransistors show exceptional high gainperformance coupled with very low saturationvoltage.
Figure 1. Internal schematic diagrams
TO-2201
23
NPN: R 1= 7 K PNP: R 1= 16 K R2= 60 R2= 70
Table 1. Device summary
Order codes Marking Package Packaging
TIP120 TIP120
TO-220 Tube
TIP121 TIP121
TIP122 TIP122
TIP125 TIP125
TIP126 TIP126
TIP127 TIP127
www.st.com
http://www.st.com/http://www.st.com/ -
8/6/2019 TIP122-STMicroelectronics
2/13
Content TIP120, TIP121, TIP122, TIP125, TIP126, TIP127
2/13
Content
1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
5 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
-
8/6/2019 TIP122-STMicroelectronics
3/13
TIP120, TIP121, TIP122, TIP125, TIP126, TIP127 Electrical ratings
3/13
1 Electrical ratings
Table 2. Absolute maximum rating(1)
1. For PNP types voltage and current values are negative.
Symbol Parameter Value Unit
NPN TIP120 TIP121 TIP122
PNP TIP125 TIP126 TIP127
VCBO Collector-base voltage (I E = 0) 60 80 100 V
VCEO Collector-emitter voltage (I B = 0) 60 80 100 V
VEBO Emitter-base voltage (I C = 0) 5 V
IC Collector current 5 A
ICM Collector peak current 8 AIB Base current 0.12 A
P TOTTotal dissipation at T c 25 C
Tamb 25 C652
W
Tstg Storage temperature -65 to 150C
TJ Max. operating junction temperature 150
Table 3. Thermal data
Symbol Parameter Value Unit
R thj-case Thermal resistance junction-case max. 1.92C/W
R thj-amb Thermal resistance junction-ambient max. 62.5
-
8/6/2019 TIP122-STMicroelectronics
4/13
Electrical characteristics TIP120, TIP121, TIP122, TIP125, TIP126, TIP127
4/13
2 Electrical characteristics
(Tcase = 25 C ; unless otherwise specified)
Table 4. Electrical characteristics (1)
1. For PNP types voltage and current values are negative.
Symbol Parameter Test conditions Min. Typ. Max. Unit
ICEOCollector cut-off current(IB = 0)
for TIP120/125 V CE = 30 Vfor TIP121/126 V CE = 40 Vfor TIP122/127 V CE = 50 V
0.50.50.5
mAmAmA
ICBOCollector cut-off current(IB = 0)
for TIP120/125 V CE = 60 Vfor TIP121/126 V CE = 80 Vfor TIP122/127 V CE = 100 V
0.20.20.2
mAmAmA
IEBOEmitter cut-off current(IC = 0) VEB = 5 V 2 mA
VCEO(sus)(2)
2. Pulsed duration = 300 s, duty cycle 2%
Collector-emittersustaining voltage(IB = 0)
IC = 30 mAfor TIP120/125for TIP121/126for TIP122/127
6080
100
VVV
VCE(sat)(2) Collector-emitter
saturation voltageIC = 3 A I B = 12 mAIC = 5 A I B = 20 mA
24
VV
VBE(on)(2) Base-emitter on voltage I C = 3 A V CE = 3 V 2.5 V
hFE(2) DC current gain
IC = 0.5 A V CE = 3 VIC = 3 A V CE = 3 V
1000
1000
-
8/6/2019 TIP122-STMicroelectronics
5/13
TIP120, TIP121, TIP122, TIP125, TIP126, TIP127 Electrical characteristics
5/13
2.1 Electrical characteristics (curves)
Figure 2. Safe operating area Figure 3. Derating curve
Figure 4. DC current gain for NPN type Figure 5. DC current gain for PNP type
Figure 6. Collector-emitter saturation voltagefor NPN type
Figure 7. Collector-emitter saturation voltagefor PNP type
hFE
1000
100
100.01 Ic(A)0.1 1
VCE = 3 V
T j= -40 CT j= 25 CT j=125 C
AM00696v1hFE
1000
100
10-0.01 Ic(A)-0.1 -1
T j= -40 CT j= 25 CT j=125 C
VCE = -3 V
AM00697v1
VCE( sa t)
1
0.6
0.20.1 Ic(A)1
hFE = 250
T j= -40 CT j= 25 CT j=125 C
(V)
1.4
AM0069 8 v1VCE( sa t)
-1
-0.6
-0.2-0.1 Ic(A)-1
hFE = 250
T j= -40 CT j= 25 CT j=125 C
(V)
-1.4
AM00699v1
-
8/6/2019 TIP122-STMicroelectronics
6/13
Electrical characteristics TIP120, TIP121, TIP122, TIP125, TIP126, TIP127
6/13
Figure 8. Base-emitter saturation voltage forNPN type
Figure 9. Base-emitter saturation voltage forPNP type
Figure 10. Base-emitter on voltage for NPNtype Figure 11. Base-emitter on voltage for PNPtype
Figure 12. Switching time on resistive load forNPN type (on)
Figure 13. Switching time on resistive load forPNP type (on)
VBE( sa t)
1.5
1.0
0.50.1 Ic(A)1
hFE = 250
T j= -40 CT j= 25 CT j=125 C
(V)
2.0
AM00700v1VBE( sa t)
-1.5
-1.0
-0.5-0.1 Ic(A)-1
hFE = 250
T j= -40 CT j= 25 CT j=125 C
(V)
-2.0
AM03 261v1
VBE(on)
1.5
1.0
0.50.1 Ic(A)1
VCE = 3 V
T j= -40 CT j= 25 CT j
=125 C
(V)
2.0
AM03 262v1VBE(on)
-1.5
-1.0
-0.5- 0.1 Ic(A)-1
T j= -40 CT j= 25 CT j
=125 C
(V)
-2.0VCE = -3 V
AM03 26 3 v1
t(n s )
100
100 Ic(A)2
Del a y timeRis e time
1 3 54
Vcc = 30 V
h FE =250Vbeof= - 5 V
Ibon= - Ibof
AM03 264v1t(n s )
100
100 Ic(A)-2
Del a y timeRis e time
-1 -3 -5-4
Vcc = -30 V
h FE =250Vbeof= 5 V
-Ibon= Ibof
AM03 265v1
-
8/6/2019 TIP122-STMicroelectronics
7/13
TIP120, TIP121, TIP122, TIP125, TIP126, TIP127 Electrical characteristics
7/13
Figure 14. Switching time on resistive load forNPN type (off)
Figure 15. Switching time on resistive load forPNP type (off)
Figure 16. Capacitances for NPN type Figure 17. Capacitances for PNP type
t(n s )
1000
1000 Ic(A)2
S tora ge timeFa ll time
1 3 54
Vcc = 30 V
h FE =250
Vbeof= - 5 V
Ibon= - Ibof
AM03 266v1t(n s )
1000
1000 Ic(A)-2
S tora ge timeFa ll time
-1 -3 -5-4
Vcc
= -30 V
h FE =250
Vbeof= 5 V-Ibon= Ibof
AM03 267v1
C(pF)
100
100.01 VR(V)10.1 10
F= 0.1 MHz
CCB
CEB
AM03 269v1C(pF)
100
100.01 VR(V)10.1 10
F= 0.1 MHz
CCB
C EB
AM03 26 8 v1
-
8/6/2019 TIP122-STMicroelectronics
8/13
Test circuits TIP120, TIP121, TIP122, TIP125, TIP126, TIP127
8/13
3 Test circuits
Figure 18. Resistive load switching for NPN type
Figure 19. Resistive load switching for PNP type
1) Fast electronic switch2) Non-inductive resistor
1) Fast electronic switch2) Non-inductive resistor
-
8/6/2019 TIP122-STMicroelectronics
9/13
TIP120, TIP121, TIP122, TIP125, TIP126, TIP127 Package mechanical data
9/13
4 Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK
packages. These packages have a lead-free second level interconnect . The category ofsecond level interconnect is marked on the package and on the inner box label, incompliance with JEDEC Standard JESD97. The maximum ratings related to solderingconditions are also marked on the inner box label. ECOPACK is an ST trademark.ECOPACK specifications are available at: www.st.com
-
8/6/2019 TIP122-STMicroelectronics
10/13
Package mechanical data TIP120, TIP121, TIP122, TIP125, TIP126, TIP127
10/13
TO-220 mechanical data
Dimmm inch
Min Typ Max Min Typ Max
A 4.40 4.60 0.17 3 0.1 8 1
b 0.61 0. 88 0.024 0.0 3 4
b 1 1.14 1.70 0.044 0.066
c 0.4 8 0.70 0.01 9 0.027
D 15.25 15.75 0.6 0.62
D1 1.27 0.050
E 10 10.40 0. 393 0.40 9
e 2.40 2.70 0.0 9 4 0.106
e1 4. 9 5 5.15 0.1 9 4 0.202
F 1.2 3 1. 3 2 0.04 8 0.051
H1 6.20 6.60 0.244 0.256
J1 2.40 2.72 0.0 9 4 0.107
L 1 3 14 0.511 0.551
L1 3 .50 3 .93 0.1 3 7 0.154
L20 16.40 0.645
L3 0 2 8 .9 0 1.1 3 7
P 3 .75 3 .8 5 0.147 0.151
Q 2.65 2. 9 5 0.104 0.116
-
8/6/2019 TIP122-STMicroelectronics
11/13
TIP120, TIP121, TIP122, TIP125, TIP126, TIP127 Package mechanical data
11/13
DIM.mm.
MIN. TYP MAX.A 4.47 4.67b 0.70 0.91
b 1 1.17 1. 3 7
c 0. 3 1 0.5 3
D 14.60 15.70E 9.96 10. 3 6e 2.54
e1 4.9 8 5.0 8 5.1 8
F 1.17 1. 3 7H1 6.10 6. 8 0J1 2.52 2. 8 2
L 12.70 1 3 .8 0
L1 3 .20 3 .96L20 15.21 16.77P 3 .73 3 .94Q 2.59 2. 8 9
TO-220 type E mechanical data
765592 3 _B
-
8/6/2019 TIP122-STMicroelectronics
12/13
Revision history TIP120, TIP121, TIP122, TIP125, TIP126, TIP127
12/13
5 Revision history
Table 5. Document revision historyDate Revision Changes
21-Jun-2004 3
25-Nov-2008 4 Inserted new Section 2.1: Electrical characteristics (curves)
-
8/6/2019 TIP122-STMicroelectronics
13/13
TIP120, TIP121, TIP122, TIP125, TIP126, TIP127
13/13
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (ST) reserve theright to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at anytime, without notice.
All ST products are sold pursuant to STs terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes noliability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of thisdocument refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party productsor services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of suchthird party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN STS TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIEDWARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIEDWARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWSOF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOTRECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAININGAPPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVEGRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USERS OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately voidany warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, anyliability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
2008 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com