Tin foil tower
Transcript of Tin foil tower
Tin Foil Tower
Lakindra bowman,lamiya Gray,Ciara Brown
Our Design step 1:First what we did was we had put some foil on the bottom to make a base.
step 2:The next step what we did was we put foil on the top to look like a stick.
step 3: The last step was we did next was we had measured it. it came out to be 24 between 25.
illustration
successful or unsuccessful
What was unsuccessful was that at first we had made up a plan but it didn't work out well.
What was successful was we had build a small base and we had put some foil at the top.
Improvement
What we need to improve is? that we could have thought it will work but it kept falling down.
What we need to improve is? to make the base more stable.
We have to make sure that the base of the tower is more heavier than the top of the tower.
What could have been better and why.
What could have been better was that we could have made it more taller,and make sure the bottom was more stable,and stopped it from falling down and put more foil on the bottom of the base to make it heavy to be stable .