Timing Belt Drive Catalog [Powerdrive.com]

INTRODUCTION

The combination of economy and superior performance is utilized for so many different purposes in so many different ways that the range of applications is virtually limiting less. Experience engineers in the field of mechanical power transmission all over the world will appreciate the logical sequence in the selection of drives featuring benefits beyond current conventional flat & Vee pulley as well chain sprocket drive.

The synchronous belt drive transmits power through two spindles, multi spindle, and various directions as well conveying material. Timing belt drive provides a concept superior to conventional flat belt, Vee belt, chain sprocket and gear. Timing belt drive provides a concept superior to conventional flat belt, Vee belt, chain sprocket and gear. Timing belt are flat belt with a series of evenly spaced teeth on the inside circumference there by combining the advantage flat belt with positive grip feature of chain and gear drive.

The toothed timing belt drive has distinct advantage for it can utilize either similarly or in combinations. It synchronizes the driver and drive sheave-pulley. It transmits greater power range than Vee belts. Timing pulley belts are available with tooth on both sides (twin power) suitable for all industrial serpentine application requiring reversed rotation in same shaft. This drive reduces vibration & is free from maintenance. Increase horsepower provides increase energy, efficiency and noise reduction.

The quickness, lightness, low cost, high efficiency and durability of timing pulley drive accounts for their use in many different areas for point drive or multipoint drives. A timing pulley transmits force to the belt via evenly spaced groove, which mate with teeth in the belt. These same grooved belt and pulley teeth prevent belt slippage. Belt teeth roll in to and out of these grooves smoothly unlike V belt on wedging or friction. Timing belts drives transmit torque to a driven pulley or force to a linear actuator. They may also convey a load placed on the belt surface.

Timing belt drive is in revolutionary tooth principle. Belts molded teeth engage with axial groove of similar tooth profile on the pulley in a smooth rolling motion. Can be utilize singly o combination to rotate, position and manipulate various objects and it transmits or a greater power than any other type of drive.

Absence of metal to metallic contact gives freedom from lubrication i.e. lubrication system or oil retaining device not required.

Drive not relying on friction and eliminate the need for high initial tension. Simply because its do not require high tight give more bearing load.

High precision and accurate positioning with very low noise compare to gears.

Power capacity range from sub fractional to approximately 800-h.p. speed range from inches per hour to approximately 16,000 fpm. /10 rpm to 10,000 rpm.

Timing pulleys are manufacture in various pitches with configuration and sizes. Some of the pitch size and tooth profile are as under:- ØTrapezoidal tooth profile -Empirical series- MXL, XL, L -Metric series- T, AT ØCurvilinear tooth profile - HTD

Industrial applications:-

Light duty precision critical equipments like computer printer, plotters, laboratory equipment, measuring equipment, data storage equipment, hand power tools, postage processors, D.C. stepper/servo motor applications, food processors, medical diagnostic equipments, sewing application, automated tailor machine, robotic equipments, vacuum cleaners etc.

Medium and heavy duty like engineering machine tools, food processor plant equipment, rolling mills, glass and plastic machinery, conveyors, building machinery, printing machinery, agriculture Equipments.

TIM

ING

PU

LLE

YT

IMIN

G P

ULLE

Y

· MP (MXL) (Aluminum):- .080 pitch Belt width 1/8", 1/4” and 3/8”

· 40 DP (LT) (Aluminum):- .0816 pitch Belt Width 3/16” and 5/16”

· XL (Aluminum):- 1/5 pitch Belt width 1/4" and 3/8”

· XL (Steel): - 1/5” pitch Belt width 3/8”

· L (Aluminum):- 3/8 pitch Belt width 1/2", 3/4” and 1”

· L (Steel):- 3/8” pitch Belt width 1 /2”, 3/4” & 1” (Finish Bore)

· L (Steel): - 3/8” pitch Belt width 1/2", 3/4” and 1” (MPB)

· L (Steel):- 3/8” pitch Belt width 1 /2”, 3/4” & 1” (Taper Lock Bush)

· L (Steel):- 3/8” pitch Belt width 1 /2”, 3/4” & 1” (QD Bush)

· L (Steel):- 3/8” pitch Belt width 1 /2”, 3/4” & 1” (Split Taper Lock Bush)

· H (Steel):- 1 /2” pitch Belt width 3/4 & 1", 1 1/2", 2” and 3” (MPB)

· H (Steel):- 1 /2” pitch Belt width 1", 1 1/2", 2” and 3” (Taper Lock Bush)

· H (Steel): - 1 /2” pitch Belt width 3 /4”, 1", 1 1/2", 2” and 3” (QD Bush)

· H (Steel): - 1 /2” pitch Belt width 3 /4”, 1", 1 1/2", 2” and 3” (Split Taper Lock Bush)

Pulley (Inch)

· T2.5 (Aluminum) :- 2.5mm pitch Belt width 6mm and 10mm

· T5 (Aluminum):- 5mm pitch Belt width 10mm, 16mm and 25mm

· T10 (Aluminum):- 10mm pitch Belt width 16mm, 25mm 32mm and 50mm

· AT5 (Aluminum):- 5mm pitch Belt width 25mm

· AT10 (Aluminum):- 10mm pitch Belt width 25mm, 32mm and 50mm

Pulley (Metric)

HTD (High Torque Drive)· 3M (HTD) (Aluminum):- Belt width 6mm and 9mm

· 5M (HTD) (Aluminum):- Belt width 9mm and 15mm

· 5M (HTD):- Belt width 15mm, 25mm (Taper Lock Bush)

· 5M (HTD):- Belt width 9mm, 15mm, 25mm (QD Bush)

· 8M (HTD):- Belt width 20mm, 30mm, 50mm and 85mm (Taper Lock Bush)

· 8M (HTD):- Belt width 20mm, 30mm, 50mm and 85mm (QD Bush)

· 14M (HTD):- Belt width 40mm, 55mm, 85mm, 115mm & 170mm (T L Bush)

· 14M (HTD):- Belt width 40mm, 55mm, 85mm, 115mm & 170mm (QD Bush)

· 20M (HTD) : - Belt width 115mm, 170mm, 230mm, 290mm & 340mm. (QD Bush)

INDEXPRODUCT

G-1 to G-3

G-4 to G-9

G-10 to G-12

G-13

G-14

G-15

G-16

G-17

G-18 to G-19

G-20 to G-22

G-23 to G-24

G-25 to G-26

G-27 to G-29

G-30 to G-32

G-33

G-34 to G-35

G-36 to G-37

G-38

G-39

G-40 to G-42

G-43 to G-45

G-46 to G-47

G-48

G-49 to G-50

G-51 to G-52

G-53 to G-57

G-58 to G-60

G-61 to G-63

TIM

ING

PU

LLE

Y

Poly Chain GT· Poly Chain 8M :- Belt width 12mm, 21mm, 36mm & 62mm (Taper Lock Bush)

· Poly Chain 8M :- Belt width 12mm, 21mm, 36mm & 62mm (QD Bush)

· Poly Chain 14M :- Belt width 20mm, 37mm, 68mm, 90mm & 125mm (T L Bush)

· Poly Chain 14M :- Belt width 20mm, 37mm, 68mm, 90mm & 125 mm (QD Bush)

G-64 to G-67

G-78 to G-71

G-72 to G-76

G-77 to G-81

INDEXPRODUCT

Timing/Gearbelt PulleyOrder Today ! Phone / Fax / Visit / www.powerdrive.com

.080 PITCH (MP) 1/8" WIDE BELTS


ALUMINUM

TYPE - 6C

L

.16D

C B O.D.P.D.

F.D.

TYPE - 6F

G-1

DIAMETERS

P.D. O.D. F.D. HUB “C”

PART NUMBER

TYPEON . OF

T ET /E HV SGROO E

BORES

STOCK MAX.

DIMENSIONS

FACE WIDTH “W”

NOTE : Pulleys with 10 to 16 grooves have 1set screw; others have 2 at 90 .

OVERALLLENGTH “L”

10MP012-6CA

11MP012-6CA

12MP012-6CA

14MP012-6CA

15MP012-6CA

16MP012-6CA

18MP012-6CA

18MP012-6FA

20MP012-6FA

20MP012-6CA

21MP012-6FA

21MP012-6CA

22MP012-6FA

22MP012-6CA

24MP012-6FA

28MP012-6FA

30MP012-6FA

32MP012-6FA

36MP012-6FA

40MP012-6FA

42MP012-6FA

44MP012-6FA

48MP012-6FA

60MP012-6FA

10

11

12

14

15

16

18

18

20

20

21

21

22

22

24

28

30

32

36

40

42

44

48

60

6C

6C

6C

6C

6C

6C

6C

6F

6F

6C

6F

6C

6F

6C

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

0.255

0.280

0.306

0.357

0.382

0.407

0.458

0.458

0.509

0.509

0.535

0.535

0.560

0.560

0.611

0.713

0.764

0.815

0.917

1.019

1.070

1.120

1.222

1.528

0.235

0.260

0.286

0.337

0.362

0.387

0.438

0.438

0.489

0.489

0.515

0.515

0.540

0.540

0.591

0.693

0.744

0.795

0.897

0.999

1.050

1.100

1.202

1.508

0.425

0.450

0.480

0.530

0.555

0.580

0.635

0.635

0.685

0.685

0.710

0.710

0.740

0.740

0.790

0.895

0.945

1.000

1.105

1.210

1.260

1.315

1.420

1.730

0.425

0.450

0.480

0.530

0.555

0.580

0.635

0.312

0.364

0.685

0.390

0.710

0.390

0.740

0.442

0.494

0.546

0.598

0.676

0.754

0.806

0.858

0.936

1.222

1/8

1/8

1/8

1/8

3/16

3/16

3/16

3/16

3/16

1/4

3/16

1/4

3/16

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

-

-

-

-

-

-

-

3/8

3/16

-

1/4

-

1/4

-

1/4

5/16

5/16

3/8

7/16

1/2

1/2

1/2

1/2

3/4

WEIGHTHUB

PROJ.“D”

0.438

0.438

0.438

0.438

0.438

0.438

0.484

0.438

0.484

0.438

0.484

0.438

0.484

0.438

0.516

0.516

0.516

0.516

0.516

0.531

0.531

0.531

0.531

0.531

-

-

-

-

-

-

0.260

-

0.260

-

0.260

-

0.260

-

0.260

0.260

0.260

0.260

0.260

0.276

0.276

0.276

0.276

0.276

0.234

0.234

0.234

0.234

0.234

0.234

0.219

0.234

0.219

0.234

0.219

0.234

0.219

0.234

0.250

0.250

0.250

0.250

0.250

0.250

0.250

0.250

0.250

0.250

0.01

0.01

0.01

0.01

0.01

0.01

0.00

0.01

0.01

0.01

0.01

0.01

0.01

0.02

0.01

0.01

0.01

0.02

0.02

0.03

0.03

0.04

0.05

0.07

1 0 M P 0 1 2 - 6 C A

No. of teethPitchBelt WidthTypeMaterial

.16

L

W

CBO.D.

P.D.

F.D.

D


.080 PITCH (MP) 1/4” WIDE BELTS

.080 PITCH (MP) 1/4” WIDE BELTS

ALUMINUM

TYPE - 6C TYPE - 6F TYPE - 6

L.29D

C B O.D.P.D.

F.D.

L

D

B CO.D.

P.D.

.38

DIAMETERS


WEIGHTPART

NUMBERTYPE

ON . OFT ET /E H

V SGROO E

BORES

STOCK

DIMENSIONS

FACE WIDTH “W”


10MP025-6CA

11MP025-6CA

12MP025-6CA

14MP025-6CA

15MP025-6CA

16MP025-6CA

18MP025-6FA

18MP025-6CA

20MP025-6FA

20MP025-6CA

21MP025-6FA

21MP025-6CA

22MP025-6FA

22MP025-6CA

24MP025-6FA

28MP025-6FA

30MP025-6FA

32MP025-6FA

36MP025-6FA

40MP025-6FA

42MP025-6FA

44MP025-6FA

48MP025-6FA

60MP025-6FA

60MP025-6A

72MP025-6A

80MP025-6A

90MP025-6A

100MP025-6A

120MP025-6A

10

11

12

14

15

16

18

18

20

20

21

21

22

22

24

28

30

32

36

40

42

44

48

60

60

72

80

90

100

120

6C

6C

6C

6C

6C

6C

6F

6C

6F

6C

6F

6C

6F

6C

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6

6

6

6

6

6

0.255

0.280

0.306

0.357

0.382

0.407

0.458

0.458

0.509

0.509

0.535

0.535

0.560

0.560

0.611

0.713

0.764

0.815

0.917

1.019

1.070

1.120

1.222

1.528

1.528

1.833

2.037

2.292

2.546

3.056

0.235

0.260

0.286

0.337

0.362

0.387

0.438

0.438

0.489

0.489

0.515

0.515

0.540

0.540

0.591

0.693

0.744

0.795

0.897

0.999

1.050

1.100

1.202

1.508

1.508

1.813

2.017

2.272

2.526

3.036

0.425

0.450

0.480

0.530

0.555

0.580

0.635

0.635

0.685

0.685

0.710

0.710

0.740

0.740

0.790

0.895

0.945

1.000

1.105

1.210

1.260

1.315

1.420

1.730

-

-

-

-

-

-

0.425

0.450

0.480

0.530

0.555

0.580

0.312

0.635

0.364

0.685

0.390

0.710

0.390

0.740

0.442

0.494

0.546

0.598

0.676

0.754

0.806

0.858

0.936

1.222

1.148

1.195

1.500

1.500

1.500

1.500

1/8

1/8

1/8

1/8

3/16

3/16

3/16

1/4

3/16

1/4

3/16

1/4

3/16

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

5/16

5/16

5/16

3/8

-

-

-

-

-

-

3/16

-

3/16

-

1/4

-

1/4

-

1/4

5/16

5/16

3/8

7/16

1/2

1/2

1/2

1/2

3/4

3/4

3/4

15/16

15/16

15/16

15/16


MAX.

0.563

0.563

0.563

0.563

0.563

0.563

0.625

0.563

0.625

0.563

0.625

0.563

0.625

0.563

0.688

0.688

0.688

0.688

0.688

0.719

0.719

0.719

0.719

0.719

0.750

0.750

0.750

0.750

0.750

0.750

-

-

-

-

-

-

0.389

-

0.389

-

0.389

-

0.389

-

0.389

0.389

0.389

0.389

0.389

0.405

0.405

0.405

0.405

0.405

-

-

-

-

-

-

0.234

0.234

0.234

0.234

0.234

0.234

0.234

0.234

0.234

0.234

0.234

0.234

0.234

0.234

0.297

0.297

0.297

0.297

0.297

0.313

0.313

0.313

0.313

0.313

0.375

0.375

0.375

0.375

0.375

0.375

0.004

0.005

0.01

0.01

0.01

0.01

0.01

0.01

0.01

0.01

0.01

0.01

0.01

0.01

0.01

0.02

0.02

0.02

0.03

0.04

0.05

0.05

0.06

0.10

0.10

0.13

0.18

0.21

0.24

0.32

HUB PROJ.

“D”

G-2

.29

LW

CBO.D.

P.D.F.D.

D




ALUMINUM

TYPE - 6C TYPE - 6

L.41D

C B O.D.P.D.

F.D.

L

.50 D

B CO.D.

P.D.

G-3


DIAMETERS


PART NUMBER

TYPEON . OF

T ET /E HV SGROO E

BORES

STOCK MAX.

DIMENSIONS

FACE WIDTH “W”


WEIGHT

10MP037-6CA

11MP037-6CA

12MP037-6CA

14MP037-6CA

15MP037-6CA

16MP037-6CA

18MP037-6FA

18MP037-6CA

20MP037-6FA

20MP037-6CA

21MP037-6FA

21MP037-6CA

22MP037-6FA

22MP037-6CA

24MP037-6FA

25MP037-6FA

28MP037-6FA

30MP037-6FA

32MP037-6FA

36MP037-6FA

40MP037-6FA

42MP037-6FA

44MP037-6FA

48MP037-6FA

60MP037-6FA

60MP037-6A

72MP037-6A

80MP037-6A

90MP037-6A

100MP037-6A

120MP037-6A

10

11

12

14

15

16

18

18

20

20

21

21

22

22

24

25

28

30

32

36

40

42

44

48

60

60

72

80

90

100

120

6C

6C

6C

6C

6C

6C

6F

6C

6F

6C

6F

6C

6F

6C

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6

6

6

6

6

6

0.255

0.280

0.306

0.357

0.382

0.407

0.458

0.458

0.509

0.509

0.535

0.535

0.560

0.560

0.611

0.637

0.713

0.764

0.815

0.917

1.019

1.070

1.120

1.222

1.528

1.528

1.833

2.037

2.292

2.546

3.056

0.235

0.260

0.286

0.337

0.362

0.387

0.438

0.438

0.489

0.489

0.515

0.515

0.540

0.540

0.591

0.617

0.693

0.744

0.795

0.897

0.999

1.050

1.100

1.202

1.508

1.508

1.813

2.017

2.272

2.526

3.036

0.425

0.450

0.480

0.530

0.555

0.580

0.312

0.635

0.364

0.685

0.390

0.710

0.390

0.740

0.442

0.468

0.494

0.546

0.598

0.676

0.754

0.806

0.858

0.936

1.222

1.148

1.195

1.500

1.500

1.500

1.500

1/8

1/8

1/8

1/8

3/16

3/16

3/16

1/4

3/16

1/4

3/16

1/4

3/16

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

5/16

5/16

5/16

3/8

0.425

0.450

0.480

0.530

0.555

0.580

0.635

0.635

0.685

0.685

0.710

0.710

0.740

0.740

0.790

0.815

0.895

0.945

1.000

1.105

1.210

1.260

1.315

1.420

1.730

-

-

-

-

-

-

0.688

0.688

0.688

0.688

0.688

0.688

0.750

0.688

0.750

0.688

0.750

0.688

0.750

0.686

0.813

0.813

0.813

0.813

0.813

0.813

0.844

0.844

0.844

0.844

0.844

0.875

0.875

0.875

0.875

0.875

0.875

-

-

-

-

-

-

0.514

-

0.514

-

0.514

-

0.514

-

0.514

0.514

0.514

0.514

0.514

0.514

0.530

0.530

0.530

0.530

0.530

-

-

-

-

-

-

0.01

0.01

0.01

0.01

0.01

0.02

0.01

0.02

0.01

0.02

0.01

0.02

0.01

0.03

0.01

0.02

0.02

0.02

0.03

0.04

0.05

0.06

0.06

0.08

0.12

0.08

0.09

0.14

0.14

0.14

0.14

-

-

-

-

-

-

3/16

-

3/16

-

1/4

-

1/4

-

1/4

5/16

5/16

5/16

3/8

7/16

1/2

1/2

1/2

1 /2

3/4

3/4

3/4

15/16

15/16

15/16

15/16

HUB PROJ.

“D”

0.234

0.234

0.234

0.234

0.234

0.234

0.234

0.234

0.234

0.234

0.234

0.234

0.234

0.234

0.297

0.297

0.297

0.297

0.297

0.297

0.844

0.844

0.844

0.844

0.844

0.875

0.875

0.875

0.875

0.875

0.875

.41

LW

CBO.D.

P.D.F.D.

D

ALUMINUM


ON . OFT ETE H

TYPEP.D.

BORESDIAMETERS

MAX.

NEW PART NUMBER O.D. F.D. STOCK

WEIGHTL WHUB

DIMENSIONS

40D.P. PITCH (LT) 3/16” WIDE BELTS


HUBPROJ.

10LT187-6CA1

11LT187-6CA1

12LT187-6CA1

13LT187-6CA1

14LT187-6CA1

15LT187-6CA1

15LT187-6CA2

16LT187-6CA1

16LT187-6CA2

18LT187-6FA1

18LT187-6FA2

18LT187-6CA3

20LT187-6FA1

20LT187-6FA2

20LT187-6CA3

21LT187-6FA1

21LT187-6FA2

21LT187-6CA3

22LT187-6FA1

22LT187-6FA2

22LT187-6CA3

24LT187-6FA2

24LT187-6FA3

26LT187-6FA2

26LT187-6FA3

28LT187-6FA2

28LT187-6FA3

10

11

12

13

14

15

15

16

16

18

18

18

20

20

20

21

21

21

22

22

22

24

24

26

26

28

28

6C

6C

6C

6C

6C

6C

6C

6C

6C

6F

6F

6C

6F

6F

6C

6F

6F

6C

6F

6F

6C

6F

6F

6F

6F

6F

6F

0.260

0.286

0.312

0.338

0.364

0.390

0.390

0.416

0.416

0.468

0.468

0.468

0.520

0.520

0.520

0.546

0.546

0.546

0.572

0.572

0.572

0.624

0.624

0.676

0.676

0.728

0.728

0.246

0.272

0.298

0.324

0.350

0.376

0.376

0.402

0.402

0.454

0.454

0.454

0.506

0.506

0.506

0.532

0.532

0.532

0.558

0.558

0.558

0.610

0.610

0.662

0.662

0.714

0.714

0.425

0.450

0.480

0.505

0.530

0.555

0.555

0.580

0.580

0.635

0.635

0.635

0.685

0.685

0.685

0.710

0.710

0.710

0.740

0.740

0.740

0.790

0.790

0.840

0.840

0.895

0.895

0.425

0.450

0.480

0.505

0.530

0.555

0.555

0.580

0.580

0.312

0.312

0.635

0.364

0.364

0.685

0.390

0.390

0.710

0.390

0.390

0.740

0.442

0.442

0.494

0.494

0.494

0.494

1/8

1/8

1/8

1/8

1/8

1/8

3/16

1/8

3/16

1/8

3/16

1/4

1/8

3/16

1/4

1/8

3/16

1/4

1/8

3/16

1/4

3/16

1/4

3/16

1/4

3/16

1/4

0.500

0.500

0.500

0.500

0.500

0.500

0.500

0.500

0.500

0.563

0.563

0.500

0.563

0.563

0.500

0.563

0.563

0.500

0.563

0.563

0.500

0.625

0.625

0.625

0.625

0.625

0.625

0.265

0.265

0.265

0.265

0.265

0.265

0.265

0.265

0.265

0.324

0.324

0.272

0.324

0.324

0.272

0.324

0.324

0.272

0.324

0.324

0.272

0.324

0.324

0.324

0.324

0.324

0.324

0.234

0.234

0.234

0.234

0.234

0.234

0.234

0.234

0.234

0.234

0.234

0.234

0.234

0.234

0.234

0.234

0.234

0.234

0.234

0.234

0.234

0.297

0.297

0.297

0.297

0.297

0.297

0.002

0.002

0.002

0.002

0.002

0.003

0.002

0.003

0.003

0.002

0.002

0.003

0.003

0.003

0.003

0.003

0.003

0.003

0.003

0.003

0.004

0.004

0.003

0.006

0.005

0.007

0.006

TYPE - 6F

LW

CBO.D.

P.D.F.D.

G-4

TYPE - 6C

L.41D

C B O.D.P.D.

F.D.

1/8

1/8

1/8

1/8

1/8

3/16

3/16

3/16

3/16

3/16

3/16

-

3/16

3/16

-

3/16

3/16

-

3/16

3/16

-

1/4

1/4

1/4

1/4

1/4

1/4

1 0 L T 1 8 7 - 6 C A


ALUMINUM


ON . OFT ETE H

TYPEP.D.

BORESDIAMETERS

MAX.


WEIGHTL WHUB

DIMENSIONS



HUBPROJ.

TYPE - 6F

LW

CBO.D.

P.D.F.D.

G-5

30LT187-6FA2

30LT187-6FA3

32LT187-6FA2

32LT187-6FA3

33LT187-6FA2

33LT187-6FA3

34LT187-6FA2

34LT187-6FA3

35LT187-6FA2

35LT187-6FA3

36LT187-6FA2

36LT187-6FA3

38LT187-6FA3

38LT187-6FA4

40LT187-6FA3

40LT187-6FA4

42LT187-6FA3

42LT187-6FA4

44LT187-6FA3

44LT187-6FA4

45LT187-6FA3

45LT187-6FA4

48LT187-6FA3

48LT187-6FA4

50LT187-6FA3

50LT187-6FA4

54LT187-6FA3

54LT187-6FA4

60LT187-6FA3

60LT187-6FA4

30

30

32

32

33

33

34

34

35

35

36

36

38

38

40

40

42

42

44

44

45

45

48

48

50

50

54

54

60

60

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

0.780

0.780

0.832

0.832

0.858

0.858

0.884

0.884

0.910

0.910

0.936

0.936

0.988

0.988

1.040

1.040

1.092

1.092

1.144

1.144

1.170

1.170

1.248

1.248

1.300

1.300

1.404

1.404

1.560

1.560

0.766

0.766

0.818

0.818

0.844

0.844

0.870

0.870

0.896

0.896

0.922

0.922

0.974

0.974

1.026

1.026

1.078

1.078

1.130

1.130

1.156

1.156

1.234

1.234

1.286

1.286

1.390

1.390

1.546

1.546

0.945

0.945

1.000

1.000

1.025

1.025

1.050

1.050

1.080

1.080

1.105

1.105

1.155

1.155

1.210

1.210

1.260

1.260

1.315

1.315

1.340

1.340

1.420

1.420

1.470

1.470

1.575

1.575

1.730

1.730

0.546

0.546

0.598

0.598

0.624

0.624

0.624

0.624

0.650

0.650

0.676

0.676

0.728

0.728

0.754

0.754

0.806

0.806

0.858

0.858

0.884

0.884

0.936

0.936

0.988

0.988

1.066

1.066

1.222

1.222

3/16

1/4

3/16

1/4

3/16

1/4

3/16

1/4

3/16

1/4

3/16

1/4

1/4

5/16

1/4

5/16

1/4

5/16

1/4

5/16

1/4

5/16

1/4

5/16

1/4

5/16

1/4

5/16

1/4

5/16

0.625

0.625

0.625

0.625

0.625

0.625

0.625

0.625

0.625

0.625

0.625

0.625

0.625

0.625

0.656

0.656

0.656

0.656

0.656

0.656

0.656

0.656

0.656

0.656

0.656

0.656

0.656

0.656

0.656

0.656

0.324

0.324

0.324

0.324

0.324

0.324

0.324

0.324

0.324

0.324

0.324

0.324

0.324

0.324

0.340

0.340

0.340

0.340

0.340

0.340

0.340

0.340

0.340

0.340

0.340

0.340

0.340

0.340

0.340

0.340

0.297

0.297

0.297

0.297

0.297

0.297

0.297

0.297

0.297

0.297

0.297

0.297

0.297

0.297

0.328

0.328

0.328

0.328

0.328

0.328

0.328

0.328

0.328

0.328

0.328

0.328

0.328

0.328

0.328

0.328

0.008

0.007

0.009

0.008

0.009

0.009

0.010

0.009

0.010

0.010

0.011

0.010

0.011

0.011

0.014

0.013

0.015

0.015

0.017

0.016

0.018

0.017

0.020

0.019

0.022

0.021

0.025

0.025

0.031

0.031

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

5/16

5/16

5/16

5/16

5/16

5/16

5/16

5/16

5/16

5/16

5/16

5/16

5/16

5/16

5/16

5/16

5/16

5/16

ALUMINUM


ON . OFT ETE H

TYPEP.D.

BORESDIAMETERS

MAX.


WEIGHTL WHUB

DIMENSIONSHUB

PROJ.



10LT312-6CA1

11LT312-6CA1

12LT312-6CA1

13LT312-6CA1

14LT312-6CA1

15LT312-6CA1

15LT312-6CA2

16LT312-6CA1

16LT312-6CA2

18LT312-6FA1

18LT312-6FA2

18LT312-6CA3

20LT312-6FA1

20LT312-6FA2

20LT312-6CA3

21LT312-6FA1

21LT312-6FA2

21LT312-6CA3

22LT312-6FA1

22LT312-6FA2

22LT312-6CA3

24LT312-6FA2

24LT312-6FA3

26LT312-6FA2

26LT312-6FA3

28LT312-6FA2

28LT312-6FA3

10

11

12

13

14

15

15

16

16

18

18

18

20

20

20

21

21

21

22

22

22

24

24

26

26

28

28

6C

6C

6C

6C

6C

6C

6C

6C

6C

6F

6F

6C

6F

6F

6C

6F

6F

6C

6F

6F

6C

6F

6F

6F

6F

6F

6F

0.260

0.286

0.312

0.338

0.364

0.390

0.390

0.416

0.416

0.468

0.468

0.468

0.520

0.520

0.520

0.546

0.546

0.546

0.572

0.572

0.572

0.624

0.624

0.676

0.676

0.728

0.728

0.246

0.272

0.298

0.324

0.350

0.376

0.376

0.402

0.402

0.454

0.454

0.454

0.506

0.506

0.506

0.532

0.532

0.532

0.558

0.558

0.558

0.610

0.610

0.662

0.662

0.714

0.714

0.425

0.450

0.480

0.505

0.530

0.555

0.555

0.580

0.580

0.635

0.635

0.635

0.685

0.685

0.685

0.710

0.710

0.710

0.740

0.740

0.740

0.790

0.790

0.840

0.840

0.895

0.895

0.425

0.450

0.480

0.505

0.530

0.555

0.555

0.580

0.580

0.312

0.312

0.635

0.364

0.364

0.685

0.390

0.390

0.710

0.390

0.390

0.740

0.442

0.442

0.494

0.494

0.494

0.494

1/8

1/8

1/8

1/8

1/8

1/8

3/16

1/8

3/16

1/8

3/16

1/4

1/8

3/16

1/4

1/8

3/16

1/4

1/8

3/16

1/4

3/16

1/4

3/16

1/4

3/16

1/4

0.390

0.390

0.390

0.390

0.390

0.390

0.390

0.390

0.390

0.449

0.449

0.397

0.449

0.449

0.397

0.449

0.449

0.397

0.449

0.449

0.397

0.449

0.449

0.449

0.449

0.449

0.449

0.234

0.234

0.234

0.234

0.234

0.234

0.234

0.234

0.234

0.234

0.234

0.234

0.234

0.234

0.234

0.234

0.234

0.234

0.234

0.234

0.234

0.297

0.297

0.297

0.297

0.297

0.297

0.002

0.002

0.002

0.002

0.002

0.003

0.002

0.003

0.002

0.002

0.002

0.002

0.003

0.002

0.003

0.003

0.003

0.003

0.003

0.003

0.004

0.005

0.004

0.006

0.005

0.006

0.006

G-6

TYPE - 6F

LW

CBO.D.

P.D.F.D.

TYPE - 6C

L.41D

C B O.D.P.D.

F.D.

0.625

0.625

0.625

0.625

0.625

0.625

0.625

0.625

0.625

0.688

0.688

0.625

0.688

0.688

0.625

0.688

0.688

0.625

0.688

0.688

0.625

0.750

0.750

0.750

0.750

0.750

0.750

1/8

1/8

1/8

1/8

1/8

3/16

3/16

3/16

3/16

3/16

3/16

-

3/16

3/16

-

3/16

3/16

-

3/16

3/16

-

1/4

1/4

1/4

1/4

1/4

1/4

ALUMINUM


ON . OFT ETE H

TYPEP.D.

BORESDIAMETERS

MAX.


WEIGHTL WHUB

DIMENSIONS



HUBPROJ.

TYPE - 6F

LW

CBO.D.

P.D.F.D.

G-7

30LT312-6FA2

30LT312-6FA3

32LT312-6FA2

32LT312-6FA3

33LT312-6FA2

33LT312-6FA3

34LT312-6FA2

34LT312-6FA3

35LT312-6FA2

35LT312-6FA3

36LT312-6FA2

36LT312-6FA3

38LT312-6FA3

38LT312-6FA4

40LT312-6FA3

40LT312-6FA4

42LT312-6FA3

42LT312-6FA4

44LT312-6FA3

44LT312-6FA4

45LT312-6FA3

45LT312-6FA4

48LT312-6FA3

48LT312-6FA4

50LT312-6FA3

50LT312-6FA4

54LT312-6FA3

54LT312-6FA4

60LT312-6FA3

60LT312-6FA4

30

30

32

32

33

33

34

34

35

35

36

36

38

38

40

40

42

42

44

44

45

45

48

48

50

50

54

54

60

60

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

0.780

0.780

0.832

0.832

0.858

0.858

0.884

0.884

0.910

0.910

0.936

0.936

0.988

0.988

1.040

1.040

1.092

1.092

1.144

1.144

1.170

1.170

1.248

1.248

1.300

1.300

1.404

1.404

1.560

1.560

0.766

0.766

0.818

0.818

0.844

0.844

0.870

0.870

0.896

0.896

0.922

0.922

0.974

0.974

1.026

1.026

1.078

1.078

1.130

1.130

1.156

1.156

1.234

1.234

1.286

1.286

1.390

1.390

1.546

1.546

0.945

0.945

1.000

1.000

1.025

1.025

1.050

1.050

1.080

1.080

1.105

1.105

1.155

1.155

1.210

1.210

1.260

1.260

1.315

1.315

1.340

1.340

1.420

1.420

1.470

1.470

1.575

1.575

1.730

1.730

0.546

0.546

0.598

0.598

0.624

0.624

0.624

0.624

0.650

0.650

0.676

0.676

0.728

0.728

0.754

0.754

0.806

0.806

0.858

0.858

0.884

0.884

0.936

0.936

0.988

0.988

1.066

1.066

1.222

1.222

3/16

1/4

3/16

1/4

3/16

1/4

3/16

1/4

3/16

1/4

3/16

1/4

1/4

5/16

1/4

5/16

1/4

5/16

1/4

5/16

1/4

5/16

1/4

5/16

1/4

5/16

1/4

5/16

1/4

5/16

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

5/16

5/16

5/16

5/16

5/16

5/16

5/16

5/16

5/16

5/16

5/16

5/16

5/16

5/16

5/16

5/16

5/16

5/16

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.781

0.781

0.781

0.781

0.781

0.781

0.781

0.781

0.781

0.781

0.781

0.781

0.781

0.781

0.781

0.781

0.449

0.449

0.449

0.449

0.449

0.449

0.449

0.449

0.449

0.449

0.449

0.449

0.449

0.449

0.465

0.465

0.465

0.465

0.465

0.465

0.465

0.465

0.465

0.465

0.465

0.465

0.465

0.465

0.465

0.465

0.297

0.297

0.297

0.297

0.297

0.297

0.297

0.297

0.297

0.297

0.297

0.297

0.297

0.297

0.313

0.313

0.313

0.313

0.313

0.313

0.313

0.313

0.313

0.313

0.313

0.313

0.313

0.313

0.313

0.313

0.007

0.007

0.008

0.008

0.009

0.008

0.009

0.009

0.010

0.009

0.011

0.010

0.011

0.010

0.013

0.012

0.014

0.013

0.016

0.015

0.017

0.016

0.019

0.018

0.020

0.020

0.024

0.023

0.029

0.029

ALUMINUM


ON . OFT ETE H

TYPEP.D.

BORESDIAMETERS

MAX.


WEIGHTL WHUB

DIMENSIONSHUB

PROJ.



20LT187-6A2

20LT187-6A3

24LT187-6A2

24LT187-6A3

30LT187-6A3

40LT187-6A3

45LT187-6A3

50LT187-6A3

50LT187-6A4

60LT187-6A3

60LT187-6A4

70LT187-6A3

70LT187-6A5

72LT187-6A3

72LT187-6A5

75LT187-6A3

75LT187-6A5

80LT187-6A3

80LT187-6A5

84LT187-6A3

84LT187-6A5

88LT187-6A3

88LT187-6A5

90LT187-6A3

90LT187-6A5

96LT187-6A3

96LT187-6A5

98LT187-6A3

98LT187-6A5

100LT187-6A4

100LT187-6A5

108LT187-6A4

108LT187-6A5

120LT187-6A4

120LT187-6A4

20

20

24

24

30

40

45

50

50

60

60

70

70

72

72

75

75

80

80

84

84

88

88

90

90

96

96

98

98

100

100

108

108

120

120

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

0.520

0.520

0.624

0.624

0.780

1.040

1.170

1.300

1.300

1.560

1.560

1.820

1.820

1.872

1.872

1.950

1.950

2.080

2.080

2.184

2.184

2.288

2.288

2.340

2.340

2.496

2.496

2.548

2.548

2.600

2.600

2.808

2.808

3.12

3.12

0.506

0.506

0.610

0.610

0.766

1.026

1.156

1.286

1.286

1.546

1.546

1.806

1.806

1.858

1.858

1.936

1.936

2.066

2.066

2.170

2.170

2.274

2.274

2.326

2.326

2.482

2.482

2.534

2.534

2.586

2.586

2.794

2.794

3.106

3.106

0.436

0.436

0.500

0.500

0.656

0.666

0.796

0.926

0.926

1.186

1.186

1.150

1.150

1.202

1.202

1.266

1.266

1.396

1.396

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

3/16

1/4

3/16

1/4

1/4

1/4

1/4

1/4

5/16

1/4

5/16

1/4

3/8

1/4

3/8

1/4

3/8

1/4

3/8

1/4

3/8

1/4

3/8

1/4

3/8

1/4

3/8

1/4

3/8

5/16

3/8

5/16

3/8

5/16

3/8

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

TYPE - 6

L

W

B CO.D.

P.D.

G-8

1/4

1/4

1/4

1/4

1/4

1/4

1/4

5/16

5/16

5/16

5/16

3/8

3/8

3/8

3/8

3/8

3/8

3/8

3/8

3/8

3/8

3/8

3/8

3/8

3/8

3/8

3/8

3/8

3/8

3/8

3/8

3/8

3/8

3/8

3/8

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.005

0.004

0.006

0.006

0.009

0.016

0.020

0.025

0.024

0.036

0.035

0.047

0.045

0.050

0.047

0.054

0.052

0.061

0.059

0.067

0.065

0.073

0.071

0.077

0.075

0.086

0.084

0.090

0.088

0.092

0.091

0.107

0.106

0.131

0.130

ALUMINUM


ON . OFT ETE H

TYPEP.D.

BORESDIAMETERS

MAX.


WEIGHTL WHUB

DIMENSIONSHUB

PROJ.



20LT312-6A2

20LT312-6A3

24LT312-6A2

24LT312-6A3

30LT312-6A3

40LT312-6A3

45LT312-6A3

50LT312-6A3

50LT312-6A4

60LT312-6A3

60LT312-6A4

70LT312-6A3

70LT312-6A5

72LT312-6A3

72LT312-6A5

75LT312-6A3

75LT312-6A5

80LT312-6A3

80LT312-6A5

84LT312-6A3

84LT312-6A5

88LT312-6A3

88LT312-6A3

90LT312-6A3

90LT312-6A5

96LT312-6A3

96LT312-6A5

98LT312-6A3

98LT312-6A5

100LT312-6A4

100LT312-6A5

108LT312-6A4

108LT312-6A5

110LT312-6A5

120LT312-6A4

120LT312-6A5

130LT312-6A5

140LT312-6A5

150LT312-6A5

20

20

24

24

30

40

45

50

50

60

60

70

70

72

72

75

75

80

80

84

84

88

88

90

90

96

96

98

98

100

100

108

108

110

120

120

130

140

150

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

0.520

0.520

0.624

0.624

0.780

1.040

1.170

1.300

1.300

1.560

1.560

1.820

1.820

1.872

1.872

1.950

1.950

2.080

2.080

2.184

2.184

2.288

2.288

2.340

2.340

2.496

2.496

2.548

2.548

2.600

2.600

2.808

2.808

2.86

3.12

3.12

3.38

3.64

3.9

0.506

0.506

0.610

0.610

0.766

1.026

1.156

1.286

1.286

1.546

1.546

1.806

1.806

1.858

1.858

1.936

1.936

2.066

2.066

2.170

2.170

2.274

2.274

2.326

2.326

2.482

2.482

2.534

2.534

2.586

2.586

2.794

2.794

2.846

3.106

3.106

3.366

3.626

3.886

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

0.436

0.436

0.500

0.500

0.656

0.666

0.796

0.926

0.926

1.186

1.186

1.150

1.150

1.202

1.202

1.266

1.266

1.396

1.396

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.625

1.750

2.000

3/16

1/4

3/16

1/4

1/4

1/4

1/4

1/4

5/16

1/4

5/16

1/4

3/8

1/4

3/8

1/4

3/8

1/4

3/8

1/4

3/8

1/4

3/8

1/4

3/8

1/4

3/8

1/4

3/8

5/16

3/8

5/16

3/8

3/8

5/16

3/8

3/8

3/8

3/8

0.500

0.500

0.500

0.500

0.500

0.500

0.500

0.500

0.500

0.500

0.500

0.500

0.500

0.500

0.500

0.500

0.500

0.500

0.500

0.500

0.500

0.500

0.500

0.500

0.500

0.500

0.500

0.500

0.500

0.500

0.500

0.500

0.500

0.500

0.500

0.500

0.500

0.500

0.500

TYPE - 6

L

W

B CO.D.

P.D.

G-9

1/4

1/4

1/4

1/4

1/4

1/4

1/4

5/16

5/16

5/16

5/16

5/16

5/16

3/8

3/8

3/8

3/8

3/8

3/8

3/8

3/8

3/8

3/8

3/8

3/8

3/8

3/8

3/8

3/8

3/8

3/8

3/8

3/8

3/8

3/8

3/8

3/8

3/8

3/8

0.875

0.875

0.875

0.875

0.875

0.875

0.875

0.875

0.875

0.875

0.875

0.875

0.875

0.875

0.875

0.875

0.875

0.875

0.875

0.875

0.875

0.875

0.875

0.875

0.875

0.875

0.875

0.875

0.875

0.875

0.875

0.875

0.875

0.875

0.875

0.875

0.875

0.875

0.875

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.375

0.005

0.004

0.006

0.006

0.009

0.015

0.020

0.024

0.023

0.035

0.034

0.046

0.044

0.049

0.047

0.053

0.051

0.061

0.058

0.067

0.065

0.073

0.071

0.076

0.074

0.086

0.084

0.089

0.087

0.092

0.091

0.106

0.105

0.109

0.130

0.129

0.152

0.176

0.203


1/5” PITCH (XL) 1/4” WIDE BELTS


ALUMINUM

TYPE - 6F

DIAMETERS


WEIGHTPART

NUMBERTYPE

ON . OFT ET /E H

V SGROO E

BORES

STOCK

DIMENSIONS

FACE WIDTH “W”


10XL025-6FA

11XL025-6FA

12XL025-6FA

13XL025-6FA

14XL025-6FA

15XL025-6FA

16XL025-6FA

18XL025-6FA

20XL025-6FA

21XL025-6FA

22XL025-6FA

24XL025-6FA

26XL025-6FA

28XL025-6FA

30XL025-6FA

10

11

12

13

14

15

16

18

20

21

22

24

26

28

30

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

0.637

0.700

0.764

0.828

0.891

0.955

1.019

1.146

1.273

1.337

1.401

1.528

1.665

1.783

1.910

0.617

0.680

0.744

0.808

0.871

0.935

0.999

1.126

1.253

1.317

1.381

1.508

1.635

1.763

1.890

0.875

0.938

1.000

1.063

1.031

1.188

1.250

1.375

1.500

1.563

1.625

1.750

1.875

2.000

2.125

0.375

0.438

0.500

0.563

0.563

0.625

0.688

0.813

0.938

1.000

1.000

1.063

1.188

1.188

1.313

3/16

3/16

3/16

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

-

1/4

1/4

-

5/16

5/16

5/16

5/16

5/16

5/16

5/16

5/16

5/16

5/16

3/8

-

-

-

-

-

-

-

-

-

-

3/8

3/8

-

3/8

-

0.688

0.688

0.688

0.688

0.688

0.688

0.688

0.688

0.750

0.750

0.750

0.781

0.781

0.781

0.781

0.438

0.438

0.438

0.438

0.438

0.438

0.438

0.438

0.438

0.438

0.438

0.438

0.438

0.438

0.438

1/4

1/4

5/16

5/16

5/16

3/8

7/16

1/2

9/16

5/8

5/8

5/8

3/4

3/4

13/16


MAX.

0.01

0.02

0.02

0.02

0.03

0.03

0.04

0.05

0.07

0.08

0.08

0.10

0.12

0.14

0.16

G-10

1 0 X L 0 2 5 - 6 F A


.31

LW

CBO.D.

P.D.F.D.



ALUMINUM

TYPE - 6F

DIAMETERS


WEIGHTPART

NUMBERTYPE

ON . OFT E /E TH

SGROOVE

BORES

STOCK

DIMENSIONS

FACE WIDTH “W”


10XL037-3FA

11XL037-3FA

12XL037-3FA

14XL037-3FA

15XL037-3FA

16XL037-3FA

18XL037-3FA

20XL037-3FA

21XL037-3FA

22XL037-3FA

24XL037-3FA

28XL037-3FA

30XL037-3FA

32XL037-3FA

10

11

12

14

15

16

18

20

21

22

24

28

30

32

3F

3F

3F

3F

3F

3F

3F

3F

3F

3F

3F

3F

3F

3F

0.637

0.700

0.764

0.891

0.955

1.019

1.146

1.273

1.337

1.401

1.528

1.783

1.910

2.037

0.617

0.680

0.744

0.871

0.935

0.999

1.126

1.253

1.317

1.381

1.508

1.763

1.890

2.017

0.875

0.938

1.000

1.094

1.188

1.250

1.375

1.500

1.563

1.625

1.750

2.000

2.125

2.250

-

-

-

-

-

-

-

-

-

-

-

-

-

-

3/16

3/16

3/16

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

5/16

1/4

1/4

1/4

-

5/16

5/16

5/16

5/16

5/16

5/16

5/16

-

-

-

-

-

-

-

-

-

-

-

-

-

3/8

3/8

3/8

3/8

1/4

1/4

1/4

1/4

5/16

5/16

5/16

3/8

5/16

5/16

3/8

3/8

3/8

3/8

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

NOTE : Pulleys with 10, 11 & 12 grooves have 1set screw; others have 2 at approximately 90 .

MAX.

HUBLESS

TYPE - 3F

SET SCREWSBETWEEN TEETH

W

F.D.

P.D.

O.D. B

.43

DIAMETERS


WEIGHTPART

NUMBERTYPE

O OFN .TEET /H

GROOVES

BORES

STOCK

DIMENSIONS

FACE WIDTH “W”


10XL037-6FA

11XL037-6FA

12XL037-6FA

13XL037-6FA

14XL037-6FA

15XL037-6FA

16XL037-6FA

17XL037-6FA

18XL037-6FA

19XL037-6FA

20XL037-6FA

21XL037-6FA

22XL037-6FA

23XL037-6FA

24XL037-6FA

25XL037-6FA

26XL037-6FA

28XL037-6FA

30XL037-6FA

32XL037-6FA

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

28

30

32

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

0.637

0.700

0.764

0.828

0.891

0.955

1.019

1.082

1.146

1.210

1.273

1.337

1.401

1.464

1.528

1.592

1.665

1.783

1.910

2.037

0.617

0.680

0.744

0.808

0.871

0.935

0.999

1.062

1.126

1.190

1.253

1.317

1.381

1.444

1.508

1.572

1.635

1.763

1.890

2.017

0.875

0.938

1.000

1.063

1.094

1.188

1.250

1.313

1.375

1.438

1.500

1.563

1.625

1.688

1.750

1.813

1.875

2.000

2.125

2.250

3/16

3/16

3/16

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

3/8

1/4

1/4

1/4

-

5/16

5/16

5/16

-

5/16

-

5/16

5/16

5/16

-

5/16

-

-

5/16

5/16

-

-

-

5/16

-

-

3/8

3/8

-

3/8

-

3/8

3/8

3/8

-

3/8

3/8

3/8

3/8

3/8

-

-

-

-

-

-

1/2

-

-

-

-

1/2

-

-

-

1/2

-

-

-

1 /2

-

1/4

5/16

5/16

5/16

3/8

3/8

7/16

7/16

1/2

1/2

9/16

5/8

5/8

5/8

5/8

11/16

3/4

3/4

13/16

7/8

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563


MAX.

0.438

0.500

0.500

0.563

0.563

0.625

0.688

0.750

0.813

0.875

0.938

1.000

1.000

1.063

1.063

1.094

1.188

1.188

1.313

1.438

0.820

0.820

0.820

0.820

0.820

0.820

0.820

0.820

0.820

0.820

0.880

0.880

0.880

0.880

0.910

0.910

0.910

0.910

0.910

0.910

0.02

0.02

0.03

0.03

0.04

0.04

0.05

0.06

0.06

0.07

0.08

0.09

0.10

0.11

0.12

0.13

0.15

0.17

0.20

0.22

0.01

0.02

0.02

0.03

0.03

0.04

0.05

0.06

0.07

0.08

0.10

0.13

0.15

0.17

G-11

WITH HUB

.43

LW

CBO.D.

P.D.F.D.




ALUMINUM

TYPE - 6 TYPE - 6W

SET SCREW

L

W

B CO.D.

P.D.

LW

B CO.D.

P.D.

DIAMETERS


WEIGHT PART NUMBER

TYPEON . OF

T ET /E HV SGROO E

BORES

STOCK

DIMENSIONS

FACE WIDTH “W”


10XL037-6A

11XL037-6A

12XL037-6A

14XL037-6A

15XL037-6A

16XL037-6A

17XL037-6A

18XL037-6A

19XL037-6A

20XL037-6A

21XL037-6A

22XL037-6A

23XL037-6A

24XL037-6A

25XL037-6A

28XL037-6A

30XL037-6A

32XL037-6A

36XL037-6A

40XL037-6A

42XL037-6A

42XL037-6WA

44XL037-6A

44XL037-6WA

45XL037-6WA

48XL037-6WA

50XL037-6WA

60XL037-6WA

72XL037-6WA

10

11

12

14

15

16

17

18

19

20

21

22

23

24

25

28

30

32

36

40

42

42

44

44

45

48

50

60

72

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6W

6

6W

6

6W

6W

6W

6W

6W

6W

0.637

0.700

0.764

0.891

0.955

1.019

1.082

1.146

1.210

1.273

1.337

1.401

1.464

1.528

1.592

1.783

1.910

2.037

2.292

2.546

2.674

2.674

2.801

2.801

2.865

3.056

3.183

3.820

4.584

0.617

0.680

0.744

0.871

0.935

0.999

1.062

1.126

1.190

1.253

1.317

1.381

1.444

1.508

1.572

1.763

1.890

2.017

2.272

2.526

2.654

2.654

2.781

2.781

2.845

3.036

3.163

3.800

4.564

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

0.438

0.500

0.563

0.563

0.688

0.750

0.813

0.875

0.875

0.938

1.000

1.063

1.125

1.188

1.250

1.250

1.375

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

3/16

3/16

3/16

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

5/16

5/16

5/16

5/16

5/16

5/16

5/16

5/16

5/16

5/16

3/8

3/8

1/4

1/4

1/4

5/16

5/16

5/16

-

5/16

-

5/16

5/16

5/16

-

5/16

3/8

5/16

3/8

3/8

3/8

3/8

3/8

3/8

3/8

3/8

3/8

3/8

3/8

1/2

1 /2

-

-

-

-

3/8

-

-

3/8

-

1/4

-

3/8

-

3/8

-

3/8

-

1/2

1/2

1/2

-

1/2

-

1/2

1/2

1/2

1/2

-

-

1/4

5/16

5/16

3/8

7/16

7/16

1/2

1/2

1/2

9/16

5/8

5/8

11/16

3/4

3/4

3/4

13/16

13/16

15/16

15/16

15/16

15/16

15/16

15/16

15/16

15/16

15/16

15/16

15/16

0.820

0.820

0.820

0.820

0.820

0.820

0.820

0.820

0.820

0.880

0.880

0.880

0.880

0.910

0.910

0.938

0.938

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563


MAX.

0.02

0.02

0.03

0.04

0.04

0.05

0.06

0.07

0.07

0.09

0.10

0.11

0.12

0.13

0.15

0.18

0.21

0.23

0.29

0.33

0.37

0.35

0.40

0.35

0.37

0.37

0.40

0.55

0.77

G-12


1/5 PITCH (XL) 3” /8” WIDE BELTS

STEEL


NE ARTW P NU BEM R

ON . OFT ETE H

Y ET PP.D. O.D. F.D.

HUB “C”

BORES

STOCK MAX.WEIGHTFACE WIDTH

“W”

DIAMETERS DIMENSIONS

10XL037-6FS2

11XL037-6FS2

12XL037-6FS2

14XL037-6FS3

15XL037-6FS3

16XL037-6FS3

18XL037-6FS3

20XL037-6FS3

21XL037-6FS3

22XL037-6FS3

24XL037-6FS3

28XL037-6FS3

30XL037-6FS4

32XL037-6S4

36XL037-6S4

40XL037-6S4

42XL037-6S4

44XL037-6S4

48XL037-6S4

60XL037-6S5

72XL037-6S5

10XL037-6FS-FB-3/16

11XL037-6FS-FB-3/16

12XL037-6FS-FB-3/16

14XL037-6FS-FB-1/4

15XL037-6FS-FB-1/4

16XL037-6FS-FB-1/4

18XL037-6FS-FB-1/4

20XL037-6FS-FB-1/4

21XL037-6FS-FB-1/4

22XL037-6FS-FB-1/4

24XL037-6FS-FB-1/4

28XL037-6FS-FB-1/4

30XL037-6FS-FB-5/16

32XL037-6S-FB-5/16

36XL037-6S-FB-5/16

40XL037-6S-FB-5/16

42XL037-6S-FB-5/16

44XL037-6S-FB-5/16

48XL037-6S-FB-5/16

60XL037-6S-FB-3/8

72XL037-6S-FB-3/8

10

11

12

14

15

16

18

20

21

22

24

28

30

32

36

40

42

44

48

60

72

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6

6

6

6

6

6

6

6

0.637

0.700

0.764

0.891

0.955

1.019

1.146

1.273

1.337

1.401

1.528

1.783

1.910

2.037

2.295

2.456

2.674

2.801

3.056

3.820

4.584

0.617

0.680

0.744

0.871

0.935

0.999

1.126

1.253

1.317

1.381

1.508

1.763

1.890

2.017

2.272

2.526

2.654

2.781

3.036

3.800

4.564

0.438

0.438

0.500

0.563

0.625

0.688

0.813

0.938

0.938

1.000

1.063

1.188

1.375

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

3/16

3/16

3/16

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

5/16

5/16

5/16

5/16

5/16

5/16

5/16

3/8

3/8

3/16

3/16

1/4

1/4

5/16

3/8

1/2

9/16

9/16

5/8

11/16

13/16

15/16

1

1

1

1

1

1

1

1

0.813

0.813

0.813

0.813

0.813

0.813

0.813

0.906

0.906

0.906

0.906

0.906

0.906

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

0.56

0.56

0.56

0.56

0.56

0.56

0.56

0.56

0.56

0.56

0.56

0.56

0.56

0.56

0.56

0.56

0.56

0.56

0.56

0.56

0.56

0.04

0.04

0.04

0.05

0.06

0.06

0.08

0.10

0.11

0.12

0.13

0.13

0.13

0.13

0.19

0.25

0.31

0.38

0.38

0.38

0.44

TYPE - 6

L

W

B CO.D.

P.D.

OLD PART NUMBER


0.938

0.938

1.000

1.125

1.188

1.250

1.375

1.500

1.563

1.625

1.750

2.000

2.125

-

-

-

-

-

-

-

-

Note: The pulleys are furnished with two set screw at 90.

TYPE - 6F

LW

CBO.D.

P.D.F.D.

G-13

3/8” PITCH (L) 1 /2” WIDE BELTS

DIAMETERS


WEIGHT PART NUMBER

TYPEON . OF

T E /E THSGROOVE

BORES

STOCK

DIMENSIONS

FACE WIDTH “W”


MAX.

10L050-6FA

11L050-6FA

12L050-6FA

13L050-6FA

14L050-6FA

15L050-6FA

16L050-6FA

17L050-6FA

18L050-6FA

19L050-6FA

20L050-6FA

21L050-6FA

22L050-6FA

24L050-6FA

10

11

12

13

14

15

16

17

18

19

20

21

22

24

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

1.194

1.313

1.432

1.552

1.671

1.790

1.910

2.029

2.149

2.268

2.387

2.507

2.626

2.865

1.164

1.283

1.402

1.522

1.641

1.760

1.880

1.999

2.119

2.238

2.357

2.477

2.596

2.835

1.438

1.531

1.656

1.781

1.906

2.031

2.125

2.250

2.375

2.500

2.625

2.750

2.875

3.094

0.875

1.000

1.125

1.125

1.250

1.375

1.375

1.500

1.625

1.688

1.813

2.000

2.125

2.250

3/8

3/8

3/8

3/8

3/8

3/8

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1 /2

1/2

1/2

1/2

1/2

1/2

1/2

5/8

5/8

5/8

5/8

5/8

5/8

5/8

5/8

1.125

1.125

1.188

1.188

1.188

1.250

1.250

1.250

1.250

1.313

1.313

1.375

1.375

1.375

1/2

5/8

11/16

11/16

3/4

13/16

13/16

15/16

1

1 1/16

1 1/8

1 1/4

1 5/16

1 3/8

0.719

0.719

0.719

0.719

0.719

0.719

0.719

0.719

0.719

0.719

0.719

0.750

0.750

0.750

.56 For 10-20 Teeth, .59 For 21-24 TeethT =


3/8” PITCH (L) 1 /2”, 3/4” & 1” WIDE BELTS

ALUMINUM

DIAMETERS


WEIGHT PART NUMBER

TYPEON . OF

T E /E THSGROOVE

BORES

STOCK

DIMENSIONS

FACE WIDTH “W”


MAX.

12L075-6FA

13L075-6FA

14L075-6FA

15L075-6FA

16L075-6FA

17L075-6FA

18L075-6FA

19L075-6FA

20L075-6FA

21L075-6FA

22L075-6FA

24L075-6FA

12

13

14

15

16

17

18

19

20

21

22

24

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

1.432

1.552

1.671

1.790

1.910

2.029

2.149

2.268

2.387

2.507

2.626

2.865

1.402

1.522

1.641

1.760

1.880

1.999

2.119

2.238

2.357

2.477

2.596

2.835

1.125

1.125

1.125

1.250

1.375

1.375

1.500

1.813

1.813

2.000

2.000

2.250

3/8

3/8

3/8

3/8

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

-

-

1/2

5/8

-

-

-

-

-

5/8

-

5/8

-

-

-

-

-

-

-

-

-

-

-

11/16

11/16

11/16

3/4

13/16

13/16

15/16

1 1/8

1 1/8

1 1/4

1 1/4

1 3/8

1.500

1.500

1.500

1.625

1.625

1.625

1.625

1.625

1.625

1.750

1.750

1.750

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

0.50

0.56

0.69

0.81

1.00

1.19

1.31

1.40

1.50

1.60

1.80

2.10

3/8” PITCH (L) 3/4” WIDE BELTS

TYPE - 6F

DIAMETERS


WEIGHT PART

NUMBERTYPE

ON . OFT E /E TH

SGROOVE

BORES

STOCK MAX.

DIMENSIONS

FACE WIDTH “W”


13L100-6FA

14L100-6FA

15L100-6FA

16L100-6FA

17L100-6FA

18L100-6FA

19L100-6FA

20L100-6FA

22L100-6FA

24L100-6FA

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

3/8

3/8

3/8

1/2

1/2

1/2

1/2

1/2

1/2

1/2

5/8

3/4

3/4

3/4

7/8

7/8

7/8

1

1

1

1.750

1.750

1.875

1.875

1.875

1.875

1.875

2.000

2.000

2.000

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

0.69

0.81

1.13

1.25

1.44

1.63

1.80

1.80

2.31

2.50

3/8” PITCH (L) 1” WIDE BELTS

0.09

0.11

0.14

0.16

0.19

0.23

0.25

0.29

0.33

0.38

0.43

0.52

0.58

0.68

NOTE : All the pulleys are furnished with two set screw at 90.

1.688

1.813

1.938

2.063

2.188

2.313

2.438

2.625

2.625

2.875

2.875

3.125

13

14

15

16

17

18

19

20

22

24

1.552

1.671

1.790

1.910

2.029

2.149

2.268

2.387

2.626

2.865

1.522

1.641

1.760

1.880

1.999

2.119

2.238

2.357

2.596

2.835

1.813

1.938

2.063

2.188

2.313

2.438

2.625

2.625

2.875

3.125

1.125

1.125

1.250

1.375

1.375

1.500

1.813

1.813

2.000

2.250

G-14

1 0 L 0 5 0 - 6 F A


T

LW

CBO.D.

P.D.F.D.

D


ON . OFT EE TH


HUB “C”

BORES

STOCKWEIGHTFACE WIDTH

“W”

DIMENSIONSDIAMETERS

MAX.HOB

PROJ.

STEEL


3/8” PITCH (L) 1 /2”, 3/4” & 1” WIDE BELTS (FINISH BORE)


10L050-6FS-FB

12L050-6FS-FB

13L050-6FS-FB

14L050-6FS-FB

15L050-6FS-FB

16L050-6FS-FB

17L050-6FS-FB

10

12

13

14

15

16

17

6F

6F

6F

6F

6F

6F

6F

1.194

1.432

1.552

1.671

1.790

1.910

2.029

1.164

1.402

1.522

1.641

1.760

1.880

1.999

1.438

1.688

1.813

1.938

2.063

2.188

2.313

0.813

1.000

1.125

1.125

1.344

1.438

1.438

3/8

3/8

3/8

3/8

1/2

1 /2

3/8

-

1/2

1/2

1/2

-

-

1 /2

-

-

-

-

5/8

5/8

5/8

-

-

-

-

3/4

3/4

3/4

1/2

3/4

3/4

3/4

7/8

1

1

1.250

1.250

1.250

1.250

1.250

1.250

1.250

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.500

0.500

0.500

0.500

0.500

0.500

0.500

0.30

0.30

0.40

0.50

0.60

0.80

0.80


PART NUMBER

O. OFNTEETH


HUB “C”

BORES


“W”

DIMENSIONSDIAMETERS

MAX.HOB

PROJ.


12L075-6FS

13L075-6FS-FB

14L075-6FS-FB

15L075-6FS-FB

16L075-6FS-FB

17L075-6FS-FB

-FB 12

13

14

15

16

17

6F

6F

6F

6F

6F

6F

1.432

1.552

1.671

1.790

1.910

2.029

1.402

1.522

1.641

1.760

1.880

1.999

1.688

1.813

1.938

2.063

2.188

2.313

1.000

1.125

1.125

1.344

1.438

1.438

3/8

3/8

3/8

1 /2

1 /2

1 /2

1/2

1/2

1/2

5/8

5/8

5/8

-

-

-

3/4

3/4

3/4

3/4

3/4

3/4

7/8

1

1

1.250

1.250

1.250

1.250

1.250

1.250

0.750

0.750

0.750

0.750

0.750

0.750

0.500

0.500

0.500

0.500

0.500

0.500

0.30

0.40

0.50

0.60

0.80

0.80

TYPE - 6F

TPAR NUMBER


PART NUMBER

O. OFNTEETH


HUB “C”

BORES


“W”

DIMENSIONSDIAMETERS

MAX.HOB

PROJ.

13L100-6FS5

14L100-6FS5-FB

15L100-6FS6-FB

16L100-6FS6-FB

17L100-6FS6-FB

-FB 13

14

15

16

17

6F

6F

6F

6F

6F

1.552

1.671

1.790

1.910

2.029

1.522

1.641

1.760

1.880

1.999

1.813

1.938

2.063

2.188

2.313

1.125

1.125

1.344

1.438

1.438

3/8

3/8

1 /2

1 /2

1 /2

1/2

1/2

5/8

5/8

5/8

-

-

3/4

3/4

3/4

3/4

3/4

7/8

1

1

1.750

1.750

1.750

1.750

1.750

1.000

1.000

1.000

1.000

1.000

0.500

0.500

0.500

0.500

0.500

0.70

0.80

1.00

1.00

1.20


NOTE:- Finished Bore Pulleys with 3/8” and 1 /2” Bore are furnished with Hollow Head Setscrews and No Keyway. Stock Pulleys with 5/8” and 3/4” Bore are furnished with 3/16” x 3/32” Keyseat and Hollow Head Setscrew over Keyseat.

G-15

LW

CBO.D.

P.D.F.D.


3/8” PITCH (L) 1 /2” 3/4” & 1” WIDE BELTS (PLAIN BORE)

STEEL

18L075-6FS7

19L075-6FS7

20L075-6FS7

21L075-6FS7

22L075-6FS7

24L075-6FS7

26L075-6FS7

28L075-6FS7

30L075-6FS7

32L075-6FS7

36L075-6FS7

40L075-6FS7

18L075-6FS-PB-5/8

19L075-6FS-PB-5/8

20L075-6FS-PB-5/8

21L075-6FS-PB-5/8

22L075-6FS-PB-5/8

24L075-6FS-PB-5/8

26L075-6FS-PB-5/8

28L075-6FS-PB-5/8

30L075-6FS-PB-5/8

32L075-6FS-PB-5/8

36L075-6FS-PB-5/8

40L075-6FS-PB-5/8

18

19

20

21

22

24

26

28

30

32

36

40

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

2.149

2.268

2.387

2.507

2.626

2.865

3.104

3.342

3.581

3.820

4.297

4.775

2.119

2.238

2.357

2.477

2.596

2.835

3.074

3.312

3.551

3.790

4.267

4.745

2.438

2.625

2.625

2.875

2.875

3.125

3.375

3.625

3.813

4.063

4.688

5.000

1.563

1.688

1.688

2.000

2.000

2.250

2.250

2.250

2.250

2.625

3.500

3.625

5/8

5/8

5/8

5/8

5/8

5/8

5/8

5/8

5/8

5/8

5/8

5/8

7/8

7/8

7/8

1 1/4

1 1/4

1 3/8

1 3/8

1 3/8

1 3/8

1 5/8

2 5/16

2 3/8

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.00

1.30

1.30

1.60

1.80

2.10

2.40

2.90

3.00

3.60

4.40

5.00



NE ARTW P NU BEM R

ON . OFT ETE H


HUB “C”

BORES


“W”

DIMENSIONS

18L050-6FS6

19L050-6FS6

20L050-6FS6

21L050-6FS6

22L050-6FS6

24L050-6FS6

26L050-6FS6

28L050-6FS6

30L050-6FS6

32L050-6FS6

36L050-6FS6

40L050-6FS6

18L050-6FS-PB-1/2

19L050-6FS-PB-1/2

20L050-6FS-PB-1/2

21L050-6FS-PB-1/2

22L050-6FS-PB-1/2

24L050-6FS-PB-1/2

26L050-6FS-PB-1/2

28L050-6FS-PB-1/2

30L050-6FS-PB-1/2

32L050-6FS-PB-1/2

36L050-6FS-PB-1/2

40L050-6FS-PB-1/2

18

19

20

21

22

24

26

28

30

32

36

40

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

2.149

2.268

2.387

2.507

2.626

2.865

3.104

3.342

3.581

3.820

4.297

4.775

2.119

2.238

2.357

2.477

2.596

2.835

3.074

3.312

3.551

3.790

4.267

4.745

2.438

2.625

2.625

2.875

2.875

3.125

3.375

3.625

3.813

4.063

4.688

5.000

1.563

1.688

1.688

2.000

2.000

2.250

2.250

2.250

2.250

2.625

3.500

3.625

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1 /2

7/8

7/8

7/8

1 1/4

1 1/4

1 3/8

1 3/8

1 3/8

1 3/8

1 5/8

2 5/16

2 3/8

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.80

0.90

1.00

1.30

1.40

1.80

2.10

2.30

2.40

3.00

3.80

4.60


DIAMETERSOLD PART NUMBER

18L100-6FS7

19L100-6FS7

20L100-6FS7

21L100-6FS7

22L100-6FS7

24L100-6FS7

26L100-6FS7

28L100-6FS7

30L100-6FS7

32L100-6FS7

36L100-6FS7

40L100-6FS7

18L100-6FS-PB-5/8

19L100-6FS-PB-5/8

20L100-6FS-PB-5/8

21L100-6FS-PB-5/8

22L100-6FS-PB-5/8

24L100-6FS-PB-5/8

26L100-6FS-PB-5/8

28L100-6FS-PB-5/8

30L100-6FS-PB-5/8

32L100-6FS-PB-5/8

36L100-6FS-PB-5/8

40L100-6FS-PB-5/8

18

19

20

21

22

24

26

28

30

32

36

40

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

2.149

2.268

2.387

2.507

2.626

2.865

3.104

3.342

3.581

3.820

4.297

4.775

2.119

2.238

2.357

2.477

2.596

2.835

3.074

3.312

3.551

3.790

4.267

4.745

2.438

2.625

2.625

2.875

2.875

3.125

3.375

3.625

3.813

4.063

4.688

5.000

1.563

1.688

1.688

2.000

2.000

2.250

2.250

2.250

2.250

2.625

3.500

3.625

5/8

5/8

5/8

5/8

5/8

5/8

5/8

5/8

5/8

5/8

5/8

5/8

7/8

7/8

7/8

1 1/4

1 1/4

1 3/8

1 5/8

1 3/4

1 7/8

2

2 5/16

2 5/16

1.750

1.750

1.750

1.750

1.750

1.750

1.750

1.750

1.750

1.750

1.750

1.750

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.2

1.4

1.8

2.0

2.1

2.5

3.0

3.6

4.1

4.8

5.4

6.0


TYPE - 6F

LW

CBO.D.

P.D.F.D.

G-16

STEEL


3/8” PITCH (L) 1 /2”, 3/4” & 1” WIDE BELTS (TAPER LOCK)

NEW PART NUMBER

NO. OF TEETH P.D. O.D.

DIAMETERS

HUB.F.D.

BORES

STOCK MAX.

DIMENSIONS

FACE WIDTH

“W”E M

WEIGHTOLD PART NUMBER


TL18L050

TL20L050

TL22L050

TL24L050

TL26L050

TL28L050

TL30L050

TL32L050

TL40L050

TL48L050

TL60L050

TL72L050

TL84L050

18L050TL-1108

20L050TL-1108

22L050TL-1108

24L050TL-1210

26L050TL-1210

28L050TL-1210

30L050TL-1610

32L050TL-1610

40L050TL-2012

48L050TL-2012

60L050TL-2012

72L050TL-2012

84L050TL-2517

18

20

22

24

26

28

30

32

40

48

60

72

84

BUSHING

1108

1108

1108

1210

1210

1610

1610

1610

2012

2012

2012

2012

2517

TYPE

8F

8F

8F

8F

8F

8F

8F

8F

8F

8F

7

7

7

2.149

2.387

2.626

2.865

3.104

3.342

3.581

3.820

4.775

5.730

7.162

8.594

10.027

2.119

2.357

2.596

2.835

3.074

3.312

3.551

3.790

4.745

5.700

7.132

8.564

9.997

2.391

2.625

2.875

3.109

3.344

3.578

3.828

4.063

5.000

6.000

-

-

-

1.625

1.813

2.063

2.250

2.500

2.750

2.875

3.063

3.500

3.938

4.375

4.375

4.375

Overall Length

1 /2

1 /2

1 /2

1 /2

1 /2

1 /2

1 /2

1 /2

1 /2

1 /2

1 /2

1 /2

1 /2

1 1/8

1 1/8

1 1/8

1 1/4

1 1/4

1 1/4

1 11/16

1 11/16

2 1/8

2 1/8

2 1/8

2 1/8

2 11/16

0.880

0.880

0.880

1.000

1.000

1.000

1.000

1.000

1.250

1.250

1.250

1.250

1.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.13

0.13

0.13

0.25

0.25

0.25

0.25

0.25

0.25

0.25

0.25

0.25

0.25

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.25

0.25

0.50

0.45

0.68

0.90

1.00

1.20

1.40

1.50

1.90

2.40

3.20

4.90

6.50

7.80

NEW PART NUMBER


DIAMETERS

HUB.F.D.

BORES

STOCK MAX.

DIMENSIONS

FACE WIDTH

“W”E M



Overall Length

TL18L075

TL20L075

TL22L075

TL24L075

TL26L075

TL28L075

TL30L075

TL32L075

TL40L075

TL48L075

TL60L075

TL74L075

TL84L075

18L075TL-1108

20L075TL-1108

22L075TL-1108

24L075TL-1210

26L075TL-1210

28L075TL-1610

30L075TL-1610

32L075TL-1610

40L075TL-2012

48L075TL-2012

60L075TL-2012

72L075TL-2012

84L075TL-2517

18

20

22

24

26

28

30

32

40

48

60

72

84

BUSHING

1108

1108

1108

1210

1210

1610

1610

1610

2012

2012

2012

2012

2517

TYPE

3F

3F

3F

3F

3F

3F

3F

3F

8F

8F

7

7

7

2.149

2.387

2.626

2.865

3.104

3.342

3.581

3.820

4.775

5.730

7.162

8.594

10.027

2.119

2.357

2.596

2.835

3.074

3.312

3.551

3.790

4.745

5.700

7.132

8.564

9.997

2.391

2.625

2.875

3.109

3.344

3.578

3.828

4.063

5.000

6.000

-

-

-

-

-

-

-

-

-

-

-

3.938

3.938

4.375

4.375

4.688

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1 /2

1 1/8

1 1/8

1 1/8

1 1/4

1 1/4

1 11/16

1 11/16

1 11/16

2 1/8

2 1/8

2 1/8

2 1/8

2 11/16

0.880

0.880

0.880

1.000

1.000

1.000

1.000

1.000

1.250

1.250

1.250

1.250

1.750

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

0.06

0.06

0.06

0.00

0.00

0.00

0.00

0.00

0.25

0.25

0.13

0.13

0.25

0.06

0.06

0.06

-

-

-

-

-

0.00

0.00

0.13

0.13

0.50

0.45

0.68

0.90

1.00

1.20

1.20

1.50

1.90

2.40

3.20

4.90

6.50

7.80

NEW PART NUMBER


DIAMETERS

HUB.F.D.

BORES

STOCK MAX.

DIMENSIONS

FACE WIDTH

“W”E M

WEIGHTP OLD ARTBNUM ER


Overall Length

TL18L100

TL20L100

TL22L100

TL24L100

TL26L100

TL28L100

TL30L100

TL32L100

TL40L100

TL48L100

TL60L100

TL72L100

TL84L100

18L100TL-1108

20L100TL-1108

22L100TL-1108

24L100TL-1210

26L100TL-1210

28L100TL-1210

30L100TL-1610

32L100TL-1610

40L100TL-2012

48L100TL-2012

60L100TL-2012

72L100TL-2012

84L100TL-2517

18

20

22

24

26

28

30

32

40

48

60

72

84

BUSHING

1108

1108

1108

1210

1210

1610

1610

1610

2012

2012

2012

2012

2517

TYPE

3F

3F

3F

3F

3F

3F

3F

3F

8F

8F

7

7

7

2.149

2.387

2.626

2.865

3.104

3.342

3.581

3.820

4.775

5.730

7.162

8.594

10.027

2.119

2.357

2.596

2.835

3.074

3.312

3.551

3.790

4.745

5.700

7.132

8.564

9.997

2.781

2.625

2.875

3.109

3.344

3.578

3.828

4.063

5.000

6.000

-

-

-

-

-

-

-

-

-

-

-

-

-

4.380

4.380

4.688

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1 /2

1 1/8

1 1/8

1 1/8

1 1/4

1 1/4

1 11/16

1 11/16

1 11/16

2 1/8

2 1/8

2 1/8

2 1/8

2 11/16

0.880

0.880

0.880

1.000

1.000

1.000

1.000

1.000

1.250

1.250

1.250

1.250

1.750

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

0.06

0.06

0.06

0.06

0.06

0.11

0.11

0.25

0.00

0.00

0.00

0.00

0.55

0.31

0.31

0.31

0.19

0.19

0.15

0.15

0.00

-

-

-

-

-

0.70

1.00

1.30

1.30

1.70

1.70

2.20

2.70

3.60

5.10

6.00

8.00

9.20

P.D.F.D.

O.D. B

E LMW

H

P.D.

O.D. B

E L M

W

TYPE - 8F TYPE - 7

P.D.F.D.

O.D. B

E L MW

TYPE - 3F

G-17

STEEL


3/8” PITCH (L) 3/4” & 1 /2” WIDE BELTS (QD BUSH)

NEW PART NUMBER

NO. OF TEETH

BUSHINGP.D. O.D.

DIAMETERS

I.D.F.D.

BORES

STOCK MAX.

DIMENSIONS

FACE WIDTH

“W”E L M

WEIGHT

QD18L075

QD20L075

QD22L075

QD24L075

QD26L075

QD28L075

QD30L075

QD32L075

QD36L075

QD40L075

QD44L075

QD48L075

QD60L075

QD72L075

QD84L075

18L075QD-JA

20L075QD-JA

22L075QD-JA

24L075QD-SH

26L075QD-SH

28L075QD-SH

30L075QD-SDS

32L075QD-SDS

36L075QD-SDS

40L075QD-SDS

44L075QD-SDS

48L075QD-SDS

60L075QD-SD

72L075QD-SD

84L075QD-SD

18

20

22

24

26

28

30

32

36

40

44

48

60

72

84

TYPE

E1F

E1F

E1F

E1F

E1F

E1F

E1F

E1F

B1F

B1F

B1F

B1F

C2

C3

C3

JA

JA

JA

SH

SH

SH

SDS

SDS

SDS

SDS

SDS

SDS

SD

SD

SD

2.149

2.387

2.626

2.865

3.104

3.342

3.581

3.820

4.297

4.775

5.252

5.730

7.162

8.594

10.027

2.119

2.357

2.596

2.835

3.074

3.312

3.551

3.790

4.267

4.745

5.222

5.700

7.132

8.564

9.997

2.438

2.625

2.875

3.313

3.375

3.625

3.813

4.063

4.531

5.000

5.484

6.000

-

-

-

-

-

1.875

1.781

1.781

2.625

2.094

3.000

3.375

3.750

4 1/4

4.750

6.250

7.625

9.125

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1 /2

1 1/4

1 1/4

1 1/4

1 5/8

1 5/8

1 5/8

2

2

2

2

2

2

2

2

2

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

0.500

0.500

0.500

0.656

0.656

0.656

0.656

0.406

0.406

0.406

0.406

0.406

0.781

0.781

0.781

1.000

1.000

1.000

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.813

1.813

1.813

0.375

0.375

0.375

0.313

0.313

0.313

0.313

0.313

-

-

-

-

0.125

0.125

0.125

0.60

0.80

1.00

1.20

1.40

1.60

1.80

2.30

2.80

3.20

3.70

4.30

5.70

7.30

8.50

D PAR OL TNUMBER

NEW PART NUMBER

NO. OF TEETH

BUSHINGP.D. O.D.

DIAMETERS

I.D.F.D.

BORES

STOCK MAX.

DIMENSIONS

FACE WIDTH

“W”E L M

WEIGHT

QD18L050

QD20L050

QD22L050

QD24L050

QD26L050

QD28L050

QD30L050

QD32L050

QD36L050

QD40L050

QD44L050

QD48L050

QD60L050

QD72L050

QD84L050

18L050QD-JA

20L050QD-JA

22L050QD-JA

24L050QD-JA

26L050QD-SH

28L050QD-SH

30L050QD-SDS

32L050QD-SDS

36L050QD-SDS

40L050QD-SDS

44L050QD-SDS

48L050QD-SDS

60L050QD-SDS

72L050QD-SDS

84L050QD-SDS

18

20

22

24

26

28

30

32

36

40

44

48

60

72

84

TYPE

E1F

E1F

E1F

E1F

B1F

B1F

B1F

B1F

B1F

B1F

B1F

B1F

C2

C3

C3

JA

JA

JA

SH

SH

SH

SDS

SDS

SDS

SDS

SDS

SDS

SD

SD

SD

2.149

2.387

2.626

2.865

3.104

3.342

3.581

3.820

4.297

4.775

5.252

5.730

7.162

8.594

10.027

2.119

2.357

2.596

2.835

3.074

3.312

3.551

3.790

4.267

4.745

5.222

5.700

7.132

8.564

9.997

2.438

2.625

2.875

3.125

3.375

3.625

3.813

4.063

4.531

5.000

5.484

6.000

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

6.250

7.625

9.125

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1 /2

1 1/4

1 1/4

1 1/4

1 5/8

1 5/8

1 5/8

2

2

2

2

2

2

2

2

2

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.500

0.500

0.500

0.656

0.656

0.656

0.656

0.656

0.656

0.656

0.656

0.656

0.906

0.906

0.906

1.000

1.000

1.000

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.813

1.813

1.813

0.000

0.000

0.000

0.000

-

-

-

-

-

-

-

-

0.250

0.250

0.250

0.50

0.70

0.90

1.00

1.20

1.30

1.50

1.90

2.30

2.60

3.00

3.40

5.10

6.50

7.80

D PAR OL TNUMBER



Note : Numerals in Type Designations mean: 1 = Solid, 2 = Web and 3 = Arm Construction; F = Flanged Pulley.

G-18

TYPE - EF

O.D.

I.D.

W

L

E

M

P.D.

F.D.

TYPE - C

I.D.

E W M

L

O.D.

P.D.

TYPE - BF

I.D.

E W

L

O.D.

P.D.

F.D.

STEEL


3/8 PITCH (L) 1” WIDE BELTS (QD BUSH)

NEW PART NUMBER

NO. OF TEETH

BUSHINGP.D. O.D.

DIAMETERS

I.D.F.D.

BORES

STOCK MAX.

DIMENSIONS

FACE WIDTH

“W”E L M

WEIGHT

QD18L100

QD20L100

QD22L100

QD24L100

QD26L100

QD28L100

QD30L100

QD32L100

QD36L100

QD40L100

QD44L100

QD48L100

QD60L100

QD72L100

QD84L100

18L100QD-JA

20L100QD-JA

22L100QD-JA

24L100QD-SH

26L100QD-SH

28L100QD-SH

30L100QD-SDS

32L100QD-SDS

36L100QD-SDS

40L100QD-SDS

44L100QD-SDS

48L100QD-SDS

60L100QD-SD

72L100QD-SD

84L100QD-SDS

18

20

22

24

26

28

30

32

36

40

44

48

60

72

84

TYPE

E1F

E1F

E1F

E1F

E1F

E1F

E1F

E1F

B1F

B1F

B1F

B1F

B2

B3

B3

JA

JA

JA

SH

SH

SH

SDS

SDS

SDS

SDS

SDS

SDS

SD

SD

SD

2.149

2.387

2.626

2.865

3.104

3.342

3.581

3.820

4.297

4.775

5.252

5.730

7.162

8.594

11.459

2.119

2.357

2.596

2.835

3.074

3.312

3.551

3.790

4.267

4.745

5.222

5.700

7.132

8.564

11.429

2.438

2.625

2.875

3.313

3.375

3.625

3.813

4.063

4.531

5.000

5.484

6.000

-

-

-

-

-

1.875

1.781

1.781

2.625

2.094

3.000

3.094

3.750

4.250

4.750

6.250

7.625

9.125

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1 /2

1 1/4

1 1/4

1 1/4

1 5/8

1 5/8

1 5/8

2

2

2

2

2

2

2

2

2

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

0.500

0.500

0.500

0.656

0.656

0.656

0.656

0.656

0.156

0.156

0.156

0.156

0.656

0.656

0.656

1.000

1.000

1.000

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.813

1.813

1.813

0.625

0.625

0.625

0.500

0.500

0.500

0.500

0.500

-

-

-

-

-

-

-

0.70

1.00

1.30

1.40

1.70

1.90

2.20

2.70

3.30

3.80

4.50

5.30

6.20

8.00

9.20

D PAR OL TNUMBER

3/8 PITCH (L) 1” WIDE BELTS


G-19

TYPE - EF

O.D.

I.D.

W

L

E

M

P.D.

F.D.

TYPE - BF

I.D.

E W

L

O.D.

P.D.

F.D.

I.D.

E W

L

O.D.

P.D.

TYPE - B

STEEL


3 /8” PITCH (L) 1 /2” WIDE BELTS (SPLIT TAPER BUSH)

P.D.F.D.

O.D. H

C L E

O.L.

F P

TYPE - 4

P.D.F.D.

O.D. H

C

L EO.L.

F P

TYPE - 5

P.D.F.D.

O.D. H

L E

O.L.

F PCX

TYPE - 7

P.D.

H

L

O.D.

I.D.

FX

PG

EO.L.

C

TYPE - 13

P.D.

H

L

I.D.

EO.L.

C

O.D.

XF

GP

1/16

TYPE - 17

18L050ST-G

19L050ST-G

20L050ST-G

21L050ST-G

22L050ST-G

24L050ST-H

26L050ST-H

28L050ST-H

30L050ST-H

32L050ST-H

36L050ST-H

36L050ST-P1

40L050ST-H

40L050ST-P1

44L050ST-H

44L050ST-P1

48L050ST-H

48L050ST-P1

60L050ST-H

60L050ST-P1

72L050ST-H

72L050ST-P1

84L050ST-H

84L050ST-P1

96L050ST-H

96L050ST-P1

120L050ST-H

120L050ST-P1

18

19

20

21

22

24

26

28

30

32

36

36

40

40

44

44

48

48

60

60

72

72

84

84

96

96

120

120

4

4

4

4

4

5

5

5

5

5

5

7

5

7

5

7

5

7

17

13

17

13

17

13

17

13

17

13

2.149

2.268

2.387

2.507

2.626

2.865

3.104

3.342

3.581

3.820

4.297

4.297

4.775

4.775

5.252

5.252

5.730

5.730

7.162

7.162

8.594

8.594

10.027

10.027

11.459

11.459

14.324

14.324

2.119

2.238

2.357

2.477

2.596

2.835

3.074

3.312

3.551

3.790

4.267

4.267

4.745

4.745

5.222

5.222

5.700

5.700

7.132

7.132

8.564

8.564

9.997

9.997

11.429

11.429

14.294

14.294

2.438

2.625

2.625

2.875

2.875

3.125

3.375

3.625

3.813

4.063

4.688

4.688

5.500

5.500

5.500

5.500

6.000

6.000

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

6.438

6.438

7.813

7.813

9.250

9.250

10.688

10.688

13.563

13.563

1.375

1.375

1.375

1.375

1.375

1.438

1.438

1.438

1.438

1.438

1.438

2.188

1.438

2.188

1.438

2.188

1.438

2.188

1.500

2.188

1.500

2.188

1.500

2.188

1.500

2.188

1.500

2.188

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

1.000

1.000

1.000

1.000

1.000

1.250

1.250

1.250

1.250

1.250

1.250

1.938

1.250

1.938

1.250

1.938

1.250

1.938

1.250

1.938

1.250

1.938

1.250

1.938

1.250

1.938

1.250

1.938

0.438

0.438

0.438

0.438

0.438

0.438

0.438

0.438

0.438

0.438

0.438

0.625

0.438

0.625

0.438

0.625

0.438

0.625

0.438

0.625

0.438

0.625

0.438

0.625

0.438

0.625

0.438

0.625

0.188

0.188

0.188

0.188

0.188

0.063

0.063

0.063

0.063

0.063

0.063

0.563

0.063

0.563

0.063

0.563

0.063

0.563

0.125

0.563

0.125

0.563

0.125

0.563

0.125

0.563

0.125

0.563

2.000

2.000

2.000

2.000

2.000

2.500

2.500

2.500

2.500

2.500

2.500

3.000

2.500

3.000

2.500

3.000

2.500

3.000

2.500

3.000

2.500

3.000

2.500

3.000

2.500

3.000

2.500

3.000

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

0.438

0.625

0.438

0.625

0.438

0.625

0.438

0.625

0.438

0.625

-

-

-

-

-

-

-

-

-

-

-

1.313

-

1.313

-

1.313

-

1.313

0.875

1.313

0.875

1.313

0.875

1.313

0.875

1.313

0.875

1.313

0.188

0.188

0.188

0.188

0.188

0.188

0.188

0.188

0.188

0.188

0.188

0.250

0.188

0.250

0.188

0.250

0.188

0.250

0.188

0.250

0.188

0.250

0.188

0.250

0.188

0.250

0.188

0.250

G

G

G

G

G

H

H

H

H

H

H

P1

H

P1

H

P1

H

P1

H

P1

H

P1

H

P1

H

P1

H

P1

0.50

0.50

0.60

0.70

0.80

1.00

1.00

1.40

1.90

2.00

2.50

2.80

3.50

3.40

4.00

4.10

4.90

4.90

4.30

4.90

5.30

6.00

6.20

7.00

7.30

8.50

9.50

10.80

NEW PART NUMBER

NO. OF TEETH

TYPEP.D. O.D.

DIAMETERS

I.D.F.D.

DIMENSIONS

WEIGHTO.L. F L P C H G X E

BUSHING


OLD PART NUMBER

18LG050

19LG050

20LG050

21LG050

22LG050

24LH050

26LH050

28LH050

30LH050

32LH050

36LH050

36LP050

40LH050

40LP050

44LH050

44LP050

48LH050

48LP050

60LH050

60LP050

72LH050

72LP050

84LH050

84LP050

96LH050

96LP050

120LH050

120LP050

G-20

Bore Range

Bushing Bore Range

G 3/8" to 1"

H 3/8" to 1 1 /2"

P1 1 /2" to 1 3/4"

STEEL


3 /8” PITCH (L) 3/4” WIDE BELTS (SPLIT TAPER BUSH)

18L075ST-G

19L075ST-G

20L075ST-G

21L075ST-G

22L075ST-G

24L075ST-H

26L075ST-H

28L075ST-H

30L075ST-H

32L075ST-H

36L075ST-H

36L075ST-P1

40L075ST-H

40L075ST-P1

44L075ST-H

44L075ST-P1

48L075ST-H

48L075ST-P1

60L075ST-H

60L075ST-P1

72L075ST-H

72L075ST-P1

84L075ST-H

84L075ST-P1

96L075ST-H

96L075ST-P1

120L075ST-H

120L075ST-P1

18

19

20

21

22

24

26

28

30

32

36

36

40

40

44

44

48

48

60

60

72

72

84

84

96

96

120

120

4

4

4

4

4

4

4

4

16

16

16

7

16

7

16

7

16

7

17

13

17

13

17

13

17

13

17

13

2.149

2.268

2.387

2.507

2.626

2.865

3.104

3.342

3.510

3.820

4.297

4.297

4.775

4.775

5.252

5.252

5.730

5.730

7.162

7.162

8.594

8.594

10.027

10.027

11.459

11.459

14.324

14.324

2.119

2.238

2.357

2.477

2.596

2.835

3.074

3.312

3.551

3.790

4.267

4.267

4.745

4.745

5.222

5.222

5.700

5.700

7.132

7.132

8.564

8.564

9.997

9.997

11.429

11.429

14.294

14.294

2.438

2.625

2.625

2.875

2.875

3.125

3.375

3.625

3.813

4.063

4.688

4.688

5.000

5.000

5.500

5.500

6.000

6.000

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

6.438

6.438

7.813

7.813

9.250

9.250

10.688

10.688

13.563

13.563

1.625

1.625

1.625

1.625

1.625

1.625

1.625

1.625

1.438

1.438

1.438

2.188

1.438

2.188

1.438

2.188

1.438

2.188

1.438

2.188

1.438

2.188

1.438

2.188

1.438

2.188

1.438

2.188

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.250

1.250

1.250

1.250

1.250

1.250

1.938

1.250

1.938

1.250

1.938

1.250

1.938

1.250

1.938

1.250

1.938

1.250

1.938

1.250

1.938

1.250

1.938

0.438

0.438

0.438

0.438

0.438

0.188

0.188

0.188

0.000

0.000

0.000

0.313

0.000

0.313

0.000

0.313

0.000

0.313

0.063

0.313

0.063

0.313

0.063

0.313

0.063

0.313

0.063

0.313

2.000

2.000

2.000

2.000

2.000

2.500

2.500

2.500

2.500

2.500

2.500

3.000

2.500

3.000

2.500

3.000

2.500

3.000

2.500

3.000

2.500

3.000

2.500

3.000

2.500

3.000

2.500

3.000

-

-

-

-

-

-

-

-

0.438

0.438

0.438

-

0.438

-

0.438

-

0.438

0.625

0.438

0.625

0.438

0.625

0.438

0.625

0.438

0.625

0.438

0.625

-

-

-

-

-

-

-

-

0.813

0.813

0.813

1.313

0.813

1.313

0.813

1.313

0.813

1.313

0.875

1.313

0.875

1.313

0.875

1.313

0.875

1.313

0.875

1.313

0.188

0.188

0.188

0.188

0.188

0.188

0.188

0.188

0.188

0.188

0.188

0.250

0.188

0.250

0.188

0.250

0.188

0.250

0.188

0.250

0.188

0.250

0.188

0.250

0.188

0.250

0.188

0.250

G

G

G

G

G

H

H

H

H

H

H

P1

H

P1

H

P1

H

P1

H

P1

H

P1

H

P1

H

P1

H

P1

0.60

0.80

0.80

1.00

1.10

1.10

1.50

1.80

1.90

2.30

3.00

3.90

3.80

3.90

4.90

4.90

5.80

5.90

4.60

5.30

5.60

6.60

6.70

7.50

7.90

8.80

10.40

11.40

P.D.F.D.

O.D. H

C L E

O.L.

F P

TYPE - 4

P.D.F.D.

O.D. H

L E

O.L.

F PCX

TYPE - 7

P.D.

H

L

O.D.

I.D.

FX

PG

EO.L.

C

TYPE - 13

P.D.

H

L

I.D.

EO.L.

C

O.D.

XF

GP

1/16

TYPE - 17TYPE - 16

P.D.F.D.

H

C L EO.L.

F P

O.D.

X G

NEW PART NUMBER

NO. OF TEETH

TYPEP.D. O.D.

DIAMETERS

I.D.F.D.

DIMENSIONS


BUSHING OLD PART NUMBER

3 /8” PITCH (L) 3/4” WIDE BELTS (SPLIT TAPER BUSH)

18LG075

19LG075

20LG075

21LG075

22LG075

24LH075

26LH075

28LH075

30LH075

32LH075

36LH075

36LP075

40LH075

40LP075

44LH075

44LP075

48LH075

48LP075

60LH075

60LP075

72LH075

72LP075

84LH075

84LP075

96LH075

96LP075

120LH075

120LP075

0.438

0.438

0.438

0.438

0.438

0.438

0.438

0.438

0.250

0.250

0.250

0.625

0.250

0.625

0.250

0.625

0.250

0.625

0.250

0.625

0.250

0.625

0.250

0.625

0.250

0.625

0.250

0.625

G-21

Bore Range

Bushing Bore Range

G 3/8" to 1"

H 3/8" to 1 1 /2"

P1 1 /2" to 1 3/4"

STEEL


3 /8” PITCH (L) 1” WIDE BELTS (SPLIT TAPER BUSH)

P.D.F.D.

O.D. H

C L E

O.L.

F P

TYPE - 4

P.D.

H

L

O.D.

I.D.

FX

PG

EO.L.

C

TYPE - 13 TYPE - 16

P.D.F.D.

H

C L EO.L.

F P

O.D.

X G

TYPE - 6

P.D.F.D.

H

L EO.L.

F PC

O.D.

TYPE - 18

P.D.

H

L

I.D.

EO.L.

C

O.D.

XF

G P

1/16

NEW PART NUMBER

NO. OF TEETH

TYPEP.D. O.D.

DIAMETERS

I.D.F.D.

DIMENSIONS



0.80

1.00

1.10

1.30

1.50

1.50

1.90

2.30

2.30

2.70

3.20

3.90

4.00

5.00

5.00

6.30

6.20

7.80

5.10

5.90

6.40

7.60

7.50

8.20

9.40

9.50

11.60

12.10

0.188

0.188

0.188

0.188

0.188

0.188

0.188

0.188

0.188

0.188

0.188

0.250

0.188

0.250

0.188

0.250

0.188

0.250

0.188

0.250

0.188

0.250

0.188

0.250

0.188

0.250

0.188

0.250

-

-

-

-

-

-

-

-

0.813

0.813

0.813

-

0.813

-

0.813

-

0.813

-

0.875

1.313

0.875

1.313

0.875

1.313

0.875

1.313

0.875

1.313

-

-

-

-

-

-

-

-

0.438

0.438

0.438

-

0.438

-

0.438

-

0.438

-

0.438

0.625

0.438

0.625

0.438

0.625

0.438

0.625

0.438

0.625

2.000

2.000

2.000

2.000

2.000

2.500

2.500

2.500

2.500

2.500

2.500

3.000

2.500

3.000

2.500

3.000

2.500

3.000

2.500

3.000

2.500

3.000

2.500

3.000

2.500

3.000

2.500

3.000

0.688

0.688

0.688

0.688

0.688

0.438

0.438

0.438

0.000

0.000

0.000

0.063

0.000

0.063

0.000

0.063

0.000

0.063

0.125

0.063

0.125

0.063

0.125

0.063

0.125

0.063

0.125

0.063

0.438

0.438

0.438

0.438

0.438

0.438

0.438

0.438

0.000

0.000

0.000

0.625

0.000

0.625

0.000

0.625

0.000

0.625

0.063

0.625

0.063

0.625

0.063

0.625

0.063

0.625

0.063

0.625

1.000

1.000

1.000

1.000

1.000

1.250

1.250

1.250

1.250

1.250

1.250

1.938

1.250

1.938

1.250

1.938

1.250

1.938

1.250

1.938

1.250

1.938

1.250

1.938

1.250

1.938

1.250

1.938

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.875

1.875

1.875

1.875

1.875

1.875

1.875

1.875

1.438

1.438

1.438

2.188

1.438

2.188

1.438

2.188

1.438

2.188

1.500

2.188

1.500

2.188

1.500

2.188

1.500

2.188

1.500

2.188

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

6.438

6.438

7.813

7.813

9.250

9.250

10.688

10.688

13.563

13.563

2.438

2.625

2.625

2.875

2.875

3.125

3.375

3.625

3.813

4.063

4.688

4.688

5.000

5.000

5.500

5.500

6.000

6.000

-

-

-

-

-

-

-

-

-

-

2.119

2.238

2.357

2.477

2.596

2.835

3.074

3.312

3.551

3.790

4.267

4.267

4.745

4.745

5.222

5.222

5.700

5.700

7.132

7.132

8.564

8.564

9.997

9.997

11.429

11.429

14.294

14.294

2.149

2.268

2.387

2.507

2.626

2.865

3.104

3.342

3.510

3.820

4.297

4.297

4.775

4.775

5.252

5.252

5.730

5.730

7.162

7.162

8.594

8.594

10.027

10.027

11.459

11.459

14.324

14.324

4

4

4

4

4

4

4

4

16

16

16

6

16

6

16

6

16

6

18

13

18

13

18

13

18

13

18

13

G

G

G

G

G

H

H

H

H

H

H

P1

H

P1

H

P1

H

P1

H

P1

H

P1

H

P1

H

P1

H

P1

18

19

20

21

22

24

26

28

30

32

36

36

40

40

44

44

48

48

60

60

72

72

84

84

96

96

120

120

18L100ST-G

19L100ST-G

20L100ST-G

21L100ST-G

22L100ST-G

24L100ST-H

26L100ST-H

28L100ST-H

30L100ST-H

32L100ST-H

36L100ST-H

36L100ST-P1

40L100ST-H

40L100ST-P1

44L100ST-H

44L100ST-P1

48L100ST-H

48L100ST-P1

60L100ST-H

60L100ST-P1

72L100ST-H

72L100ST-P1

84L100ST-H

84L100ST-P1

96L100ST-H

96L100ST-P1

120L100ST-H

120L100ST-P1

3 /8” PITCH (L) 1” WIDE BELTS (SPLIT TAPER BUSH)

18LG100

19LG100

20LG100

21LG100

22LG100

24LH100

26LH100

28LH100

30LH100

32LH100

36LH100

36LP100

40LH100

40LP100

44LH100

44LP100

48LH100

48LP100

60LH100

60LP100

72LH100

72LP100

84LH100

84LP100

96LH100

96LP100

120LH100

120LP100

G-22


1 /2” PITCH (H) 3/4”, 1” & 1-1 /2” WIDE BELTS (PLAIN BORE)

STEEL

14H150-6FS8

16H150-6FS8

17H150-6FS8

18H150-6FS8

19H150-6FS8

20H150-6FS8

21H150-6FS8

22H150-6FS8

24H150-6FS8

26H150-6FS8

28H150-6FS8

30H150-6FS8

14H150-6FS-PB-3/4

16H150-6FS-PB-3/4

17H150-6FS-PB-3/4

18H150-6FS-PB-3/4

19H150-6FS-PB-3/4

20H150-6FS-PB-3/4

21H150-6FS-PB-3/4

22H150-6FS-PB-3/4

24H150-6FS-PB-3/4

26H150-6FS-PB-3/4

28H150-6FS-PB-3/4

30H150-6FS-PB-3/4

14

16

17

18

19

20

21

22

24

26

28

30

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

2.228

2.546

2.706

2.865

3.024

3.183

3.342

3.501

3.820

4.138

4.456

4.775

2.174

2.492

2.652

2.811

2.970

3.129

3.288

3.447

3.766

4.084

4.402

4.721

2.438

2.875

3.000

3.125

3.375

3.375

3.625

3.813

4.063

4.375

4.688

5.000

1.625

1.875

2.000

2.250

2.375

2.500

2.625

2.750

3.000

3.375

3.500

3.625

3/4

3/4

3/4

3/4

3/4

3/4

3/4

3/4

3/4

3/4

3/4

3/4

7/8

1 1/8

1 1/4

1 3/8

1 1/2

1 5/8

1 11/16

1 3/4

1 7/8

2 1/4

2 5/16

2 3/8

2.375

2.500

2.500

2.500

2.500

2.625

2.625

2.750

2.750

2.750

2.875

2.875

1.750

1.750

1.750

1.750

1.750

1.750

1.750

1.750

1.750

1.750

1.750

1.750

1.80

2.50

3.00

3.40

3.90

4.50

5.00

5.80

6.90

8.50

10.10

11.50

1 /2” PITCH (H) 1 1 /2” WIDE BELTS

14H100-6FS7

16H100-6FS7

17H100-6FS7

18H100-6FS7

19H100-6FS7

20H100-6FS7

21H100-6FS8

22H100-6FS8

24H100-6FS8

26H100-6FS8

28H100-6FS8

30H100-6FS8

14H100-6FS-PB-5/8

16H100-6FS-PB-5/8

17H100-6FS-PB-5/8

18H100-6FS-PB-5/8

19H100-6FS-PB-5/8

20H100-6FS-PB-5/8

21H100-6FS-PB-3/4

22H100-6FS-PB-3/4

24H100-6FS-PB-3/4

26H100-6FS-PB-3/4

28H100-6FS-PB-3/4

30H100-6FS-PB-3/4

14

16

17

18

19

20

21

22

24

26

28

30

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

2.228

2.546

2.706

2.865

3.024

3.183

3.342

3.501

3.820

4.138

4.456

4.775

2.174

2.492

2.652

2.811

2.970

3.129

3.288

3.447

3.766

4.084

4.402

4.721

2.438

2.875

3.000

3.125

3.375

3.375

3.625

3.813

4.063

4.375

4.688

5.000

1.625

1.875

2.000

2.250

2.375

2.500

2.625

2.750

3.000

3.375

3.500

3.625

5/8

5/8

5/8

5/8

5/8

5/8

3/4

3/4

3/4

3/4

3/4

3/4

7/8

1 1/8

1 1/4

1 3/8

1 1/2

1 5/8

1 11/16

1 3/4

1 7/8

2 1/4

2 5/16

2 3/8

1.875

2.000

2.000

2.000

2.000

2.125

2.125

2.250

2.250

2.375

2.375

2.375

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.40

2.00

2.30

2.80

3.10

3.60

3.90

4.50

5.60

7.00

8.00

9.10

1 /2 PITCH (H) 3/4” & 1” WIDE BELTS

TYPE - 6F


NE ARTW P NU BEM R

ON . OFT ETE H


HUB “C”

BORES


“W”

DIMENSIONSDIAMETERSOLD PART NUMBER


NE ARTW P NU BEM R

ON . OFT ETE H


HUB “C”

BORES


“W”


LW

CBO.D.

P.D.F.D.

G-23

1 4 H 1 0 0 - 6 F S



1 /2” PITCH (H) 2” & 3” WIDE BELTS (PLAIN BORE)

STEEL

16H300-6FS8

17H300-6FS8

18H300-6FS8

19H300-6FS8

20H300-6FS8

21H300-6FS8

22H300-6FS11

24H300-6FS11

26H300-6FS11

28H300-6FS11

30H300-6FS11

16H300-6FS-PB-3/4

17H300-6FS-PB-3/4

18H300-6FS-PB-3/4

19H300-6FS-PB-3/4

20H300-6FS-PB-3/4

21H300-6FS-PB-3/4

22H300-6FS-PB-1/18

24H300-6FS-PB-1/18

26H300-6FS-PB-1/18

28H300-6FS-PB-1/18

30H300-6FS-PB-1/18

16

17

18

19

20

21

22

24

26

28

30

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

2.546

2.706

2.865

3.024

3.183

3.342

3.501

3.820

4.138

4.456

4.775

2.492

2.652

2.811

2.970

3.129

3.288

3.447

3.766

4.084

4.402

4.721

2.875

3.000

3.375

3.375

3.375

3.625

3.813

4.063

4.375

4.688

5.000

1.875

2.000

2.250

2.375

2.500

2.625

2.750

3.000

3.375

3.500

3.625

3/4

3/4

3/4

3/4

3/4

3/4

1 1/8

1 1/8

1 1/8

1 1/8

1 1/8

1 1/8

1 1/4

1 3/8

1 1/2

1 5/8

1 11/16

1 3/4

1 7/8

2 1/4

2 5/16

2 3/8

4.063

4.063

4.063

4.063

4.188

4.188

4.313

4.313

4.438

4.438

4.438

3.313

3.313

3.313

3.313

3.313

3.313

3.313

3.313

3.313

3.313

3.313

4.50

5.10

6.00

6.60

7.50

9.00

10.90

12.00

13.40

15.60

18.00

1 /2” PITCH (H) 3” WIDE BELTS

14H200-6FS8

16H200-6FS8

17H200-6FS8

18H200-6FS8

19H200-6FS8

20H200-6FS10

21H200-6FS10

22H200-6FS10

24H200-6FS10

26H200-6FS10

28H200-6FS10

30H200-6FS10

14H200-6FS-PB-3/4

16H200-6FS-PB-3/4

17H200-6FS-PB-3/4

18H200-6FS-PB-3/4

19H200-6FS-PB-3/4

20H200-6FS-PB-1

21H200-6FS-PB-1

22H200-6FS-PB-1

24H200-6FS-PB-1

26H200-6FS-PB-1

28H200-6FS-PB-1

30H200-6FS-PB-1

14

16

17

18

19

20

21

22

24

26

28

30

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

2.228

2.546

2.706

2.865

3.024

3.183

3.342

3.501

3.820

4.138

4.456

4.775

2.174

2.492

2.652

2.811

2.970

3.129

3.288

3.447

3.766

4.084

4.402

4.721

2.438

2.875

3.000

3.125

3.375

3.375

3.625

3.813

4.063

4.375

4.688

5.000

1.625

1.875

2.000

2.250

2.375

2.500

2.625

2.750

3.000

3.375

3.500

3.625

3/4

3/4

3/4

3/4

3/4

1

1

1

1

1

1

1

7/8

1 1/8

1 1/4

1 3/8

1 1/2

1 5/8

1 11/16

1 3/4

1 7/8

2 1/4

2 5/16

2 3/8

2.906

3.031

3.031

3.031

3.031

3.156

3.156

3.281

3.281

3.406

3.406

3.406

2.281

2.281

2.281

2.281

2.281

2.281

2.281

2.281

2.281

2.281

2.281

2.281

2.30

3.30

3.80

4.40

5.00

5.30

5.90

6.90

8.30

10.20

11.80

13.50


TYPE - 6F


NE ARTW P NU BEM R

ON . OFT ETE H


HUB “C”

BORES


“W”



NE ARTW P NU BEM R

ON . OFT ETE H


HUB “C”

BORES


“W”


LW

CBO.D.

P.D.F.D.

G-24

STEEL


1 /2” PITCH (H) 1” & 1 1 /2” WIDE BELTS (TAPER LOCK)

NEW PART NUMBER

NO. OF TEETH

BUSHINGP.D. O.D.

DIAMETERS

HUB.F.D.

BORES

STOCK MAX.

DIMENSIONS

FACE WIDTH

“W”E M


1 /2 ” WIDE BELTS” PITCH (H) 1

Overall Length

TL14H100

TL16H100

TL18H100

TL20H100

TL22H100

TL24H100

TL26H100

TL28H100

TL30H100

TL32H100

TL40H100

TL48H100

TL60H100

TL72H100

TL84H100

TL96H100

TL120H100

14H100TL-1108

16H100TL-1108

18H100TL-1210

20H100TL-1210

22H100TL-1610

24H100TL-1610

26H100TL-2012

28H100TL-2012

30H100TL-2012

32H100TL-2517

40H100TL-2517

48H100TL-2517

60H100TL-3020

72H100TL-3020

84H100TL-3020

96H100TL-3020

120H100TL-3020

14

16

18

20

22

24

26

28

30

32

40

48

60

72

84

96

120

1108

1108

1210

1210

1610

1610

2012

2012

2012

2517

2517

2517

3020

3020

3020

3020

3020

TYPE

3F

3F

3F

3F

3F

3F

3F

3F

3F

8F

8F

8F

8

8

8

8

8

2.228

2.546

2.865

3.183

3.501

3.820

4.138

4.456

4.775

5.093

6.366

7.639

9.549

11.459

13.369

15.279

19.099

2.174

2.492

2.811

3.129

3.447

3.766

4.084

4.402

4.721

5.039

6.312

7.585

9.495

11.405

13.315

15.225

19.045

2.480

2.800

3.110

3.440

3.750

4.020

4.390

4.700

5.020

5.330

6.563

8.020

-

-

-

-

-

-

-

-

-

-

-

-

-

-

4.438

4.438

4.438

6.250

6.250

6.250

6.250

6.250

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

7/8

7/8

7/8

7/8

7/8

1 1/8

1 1/8

1 1/4

1 1/4

1 11/16

1 11/16

2 1/8

2 1/8

2 1/8

2 11/16

2 11/16

2 11/16

3 1/4

3 1/4

3 1/4

3 1/4

3 1/4

0.880

0.880

1.000

1.000

1.000

1.000

1.250

1.250

1.250

1.750

1.750

1.750

2.000

2.000

2.000

2.000

2.000

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

0.06

0.06

0.06

0.11

0.11

0.11

0.06

0.06

0.06

0.44

0.44

0.44

0.34

0.34

0.34

0.34

0.00

0.42

0.42

0.25

0.25

0.25

0.25

0.00

0.00

0.00

0.00

0.00

0.00

0.34

0.34

0.34

0.34

0.59

0.80

1.30

1.20

1.70

1.80

2.30

2.20

2.80

4.20

4.10

7.80

12.10

10.30

14.00

20.00

27.00

38.00

NEW PART NUMBER

NO. OF TEETH

BUSHINGP.D. O.D.

DIAMETERS

HUB.F.D.

BORES

STOCK MAX.

DIMENSIONS

FACE WIDTH

“W”E M

WEIGHTLD PART O

NUMBER

1 /2 1 /2” WIDE BELTS” PITCH (H) 1

Overall Length

TL14H150

TL16H150

TL18H150

TL20H150

TL22H150

TL24H150

TL26H150

TL28H150

TL30H150

TL32H150

TL40H150

TL48H150

TL60H150

TL72H150

TL84H150

TL96H150

TL120H150

14H150TL-1108

16H150TL-1108

18H150TL-1210

20H150TL-1210

22H150TL-1610

24H150TL-2012

26H150TL-2012

28H150TL-2012

30H150TL-2012

32H150TL-2517

40H150TL-2517

48H150TL-2517

60H150TL-3020

72H150TL-3020

84H150TL-3020

96H150TL-3020

120H150TL-3020

14

16

18

20

22

24

26

28

30

32

40

48

60

72

84

96

120

1008

1008

1210

1215

1615

2012

2012

2012

2012

2517

2517

2517

3020

3020

3020

3020

3020

TYPE

2F

2F

3F

3F

3F

3F

3F

3F

3F

3F

3F

3F

3

3

3

3

3

2.228

2.546

2.865

3.183

3.501

3.820

4.138

4.456

4.775

5.093

6.366

7.639

9.549

11.459

13.369

15.279

19.099

2.174

2.492

2.811

3.129

3.447

3.766

4.084

4.402

4.721

5.039

6.312

7.585

9.495

11.405

13.315

15.225

19.045

2.480

2.800

3.110

3.440

3.750

4.060

4.780

4.700

5.020

5.330

6.563

8.020

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

6.250

6.250

6.250

6.250

6.250

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

7/8

7/8

7/8

7/8

7/8

1

1

1 1/4

1 1/4

1 11/16

2 1/8

2 1/8

2 1/8

2 1/8

2 11/16

2 11/16

2 11/16

3 1/4

3 1/4

3 1/4

3 15/16

3 1/4

0.880

0.880

1.000

1.000

1.000

1.250

1.250

1.250

1.250

1.750

1.750

1.750

2.000

2.000

2.000

2.000

2.000

1.859

1.859

1.859

1.859

1.859

1.859

1.859

1.859

1.859

1.859

1.859

1.859

1.859

1.859

1.859

1.859

1.859

0.47

0.47

0.11

0.11

0.11

0.56

0.56

0.56

0.56

0.11

0.11

0.00

0.09

0.09

0.09

0.09

0.09

0.88

0.88

0.75

0.75

0.75

0.00

0.00

0.00

0.00

0.00

0.00

0.06

0.09

0.09

0.09

0.09

0.09

1.00

1.50

1.60

2.20

2.50

2.20

3.20

4.10

5.10

4.60

8.60

13.60

12.30

17.00

21.50

31.00

40.00

P.D.F.D.

O.D. B

E L MW

TYPE - 3F

P.D.F.D.

O.D. B

E LMW

H

TYPE - 8F

P.D.F.D.

O.D. B

E L MW

TYPE - 2F

P.D.

O.D. B

E L MW

TYPE - 3

P.D.O.D. B

LMW

H

TYPE - 8

G-25

STEEL


1 /2 ” & 3” WIDE BELTS (TAPER LOCK)” PITCH (H) 2

NEW PART NUMBER

NO. OF TEETH

BUSHINGP.D. O.D.

DIAMETERS

HUB.F.D.

BORES

STOCK MAX.

DIMENSIONS

FACE WIDTH

“W”E M

WEIGHTPOLD ART

NUMBER


Overall Length

TL16H200

TL18H200

TL20H200

TL22H200

TL24H200

TL26H200

TL28H200

TL30H200

TL32H200

TL40H200

TL48H200

TL60H200

TL72H200

TL84H200

TL96H200

TL120H200

16H200TL_1108

18H200TL-1215

20H200TL-1215

22H200TL-1615

24H200TL-2012

26H200TL-2012

28H200TL-2012

30H200TL-2012

32H200TL-2517

40H200TL-2517

48H200TL-3020

60H200TL-3020

72H200TL-3020

84H200TL-3020

96H200TL-3535

120H200TL-3020

16

18

20

22

24

26

28

30

32

40

48

60

72

84

96

120

1008

1210

1215

1615

2012

2012

2012

2012

2517

2517

2517

3020

3020

3020

3020

3020

TYPE

2F

3F

3F

3F

3F

3F

3F

3F

3F

3F

3F

AW

AW

AW*

AW*

AW*

2.546

2.865

3.183

3.501

3.820

4.138

4.456

4.775

5.093

6.366

7.639

9.549

11.459

13.369

15.279

19.099

2.492

2.811

3.129

3.447

3.766

4.084

4.402

4.721

5.039

6.312

7.585

9.495

11.405

13.315

15.225

19.045

2.800

3.110

3.440

3.750

4.063

4.780

4.700

5.020

5.330

6.580

8.020

-

-

-

-

-

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

7.000

0.000

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

7/8

7/8

7/8

7/8

1 3/16

7/8

1 1/8

1 1/4

1 1/4

1 5/8

2

2

2

2

2 1/2

2 1/2

3

3

3 1/4

3 1/4

3 15/16

3 1/4

0.880

1.500

1.500

1.500

1.250

1.250

1.250

1.250

1.750

1.750

2.000

2.000

2.000

2.000

3.500

2.000

2.344

2.344

2.344

2.344

2.344

2.344

2.344

2.344

2.344

2.344

2.344

2.344

2.344

2.344

2.344

2.344

0.75

0.44

0.42

0.42

0.55

0.55

0.55

1.09

0.59

0.59

0.41

0.17

0.00

0.00

0.40

0.00

0.72

0.41

0.42

0.42

0.55

0.55

0.55

0.00

0.00

0.00

0.00

0.17

0.34

0.34

0.75

0.34

1.90

1.80

2.60

2.80

2.60

3.60

5.10

7.00

5.50

9.90

14.30

15.30

21.00

23.00

34.00

42.00

NEW PART NUMBER

NO. OF TEETH

BUSHINGP.D. O.D.

DIAMETERS

HUB.F.D.

BORES

STOCK MAX.

DIMENSIONS

FACE WIDTH

“W”E M

WEIGHTPOLD ART

NUMBER


Overall Length

TL18H300

TL20H300

TL22H300

TL24H300

TL26H300

TL28H300

TL30H300

TL32H300

TL40H300

TL48H300

TL60H300

TL72H300

TL84H300

TL96H300

TL120H300

16H300TL-1108

18H300TL-1215

20H300TL-1215

22H300TL-1615

24H300TL-2012

26H300TL-2012

28H300TL-2012

30H300TL-2012

32H300TL-2517

40H300TL-2517

48H300TL-3020

60H300TL-3020

72H300TL-3020

84H300TL-3020

96H300TL-3535

120H300TL-3535

16

18

20

22

24

26

28

30

32

40

48

60

72

84

96

120

1108

1215

1215

1615

2012

2012

2012

2012

2517

2517

3020

3020

3020

3020

3535

3535

TYPE

2F

2F

2F

2F

2F

2F

2F

2F

2F

2F

2F

AW

AW

AW*

AW*

AW*

2.546

2.865

3.183

3.501

3.820

4.138

4.456

4.775

5.093

6.366

7.639

9.549

11.459

13.369

15.279

19.099

2.492

2.811

3.129

3.447

3.766

4.084

4.402

4.721

5.039

6.312

7.585

9.495

11.405

13.315

15.225

19.045

2.800

3.110

3.440

3.750

4.063

4.780

4.700

5.020

5.330

6.580

8.020

-

-

-

-

-

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

7.000

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

7/8

7/8

7/8

7/8

1 3/16

1 3/16

1 1/8

1 1/4

1 1/4

1 11/16

2 1/8

2 1/8

2 1/8

2 1/8

2 11/16

2 11/16

3 1/4

3 1/4

3 1/4

3 1/4

3 15/16

3 15/16

0.870

1.500

1.500

1.500

1.250

1.250

1.250

1.250

1.750

1.750

2.000

2.000

2.000

2.000

3.500

3.500

3.375

3.375

3.375

3.375

3.375

3.375

3.375

3.375

3.375

3.375

3.375

3.375

3.375

3.375

3.375

3.375

1.28

0.94

0.94

0.94

1.06

1.06

1.06

1.06

0.81

0.81

0.69

0.69

0.31

0.69

0.06

0.12

1.23

0.94

0.94

0.94

1.06

1.06

1.06

1.06

0.81

0.81

0.69

0.69

1.06

0.69

0.06

0.00

2.50

2.60

3.90

4.00

4.30

5.40

6.80

7.50

7.40

12.10

16.30

17.30

23.00

30.00

38.00

51.00

P.D.F.D.

O.D. B

E L MW

TYPE - 3F

P.D.F.D.

O.D. B

E L MW

TYPE - 2F

P.D.

O.D. B

E L M

W

TYPE - 3 TYPE - AW

LW

E M

P.D.

O.D.

NOTE : * With Arm

G-26

STEEL


1 /2” PITCH (H) 3/4” & 1” WIDE BELTS (QD BUSH)

NEW PART NUMBER

NO. OF TEETH

BUSHINGP.D. O.D.

DIAMETERS

I.D.F.D.

BORES

STOCK MAX.

DIMENSIONS

FACE WIDTH

“W”E L M

WEIGHT

QD14H100

QD16H100

QD18H100

QD19H100

QD20H100

QD21H100

QD22H100

QD23H100

QD24H100

QD25H100

QD26H100

QD27H100

QD28H100

QD29H100

QD30H100

QD31H100

QD32H100

QD33H100

QD34H100

QD35H100

QD36H100

QD37H100

QD38H100

QD39H100

QD40H100

QD41H100

QD42H100

QD43H100

QD44H100

QD45H100

QD48H100

QD60H100

QD72H100

QD84H100

QD96H100

QD120H100

QD156H100

14H100QD-JA

16H100QD-JA

18H100QD-SH

19H100QD-SH

20H100QD-SH

21H100QD-SH

22H100QD-SDS

23H100QD-SDS

24H100QD-SDS

25H100QD-SDS

26H100QD-SDS

27H100QD-SDS

28H100QD-SDS

29H100QD-SD

30H100QD-SD

31H100QD-SD

32H100QD-SK

33H100QD-SK

34H100QD-SK

35H100QD-SK

36H100QD-SK

37H100QD-SK

38H100QD-SK

39H100QD-SK

40H100QD-SK

41H100QD-SK

42H100QD-SK

43H100QD-SK

44H100QD-SK

45H100QD-SK

48H100QD-SK

60H100QD-SF

72H100QD-SF

84H100QD-SF

96H100QD-SF

120H100QD-SF

156H100QD-SF

14

16

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

48

60

72

84

96

120

156

JA

JA

SH

SH

SH

SH

SDS

SDS

SDS

SDS

SDS

SDS

SDS

SDS

SD

SD

SK

SK

SK

SK

SK

SK

SK

SK

SK

SK

SK

SK

SK

SK

SK

SF

SF

SF

SF

SF

SF

2.228

2.546

2.865

3.024

3.183

3.342

3.501

3.661

3.820

3.979

4.138

4.297

4.456

4.615

4.775

4.934

5.093

5.252

5.411

5.570

5.730

5.889

6.048

6.207

6.366

6.525

6.684

6.844

7.003

7.162

7.639

9.549

11.405

31.315

15.225

19.045

24.774

2.174

2.492

2.811

2.970

3.129

3.288

3.447

3.607

3.766

3.925

4.084

4.243

4.402

4.561

4.721

4.880

5.039

5.198

5.357

5.516

5.676

5.835

5.994

6.153

6.312

6.471

6.630

6.790

6.948

7.108

7.585

9.495

11.405

31.315

15.225

19.045

24.774

TYPE

E1F

E1F

E1F

E1F

E1F

E1F

E1F

E1F

E1F

E1F

D1F

D1F

D1F

B1F

B1F

B1F

B1F

B1F

B1F

B1F

B1F

B1F

B1F

B1F

B1F

B1F

B1F

B1F

B1F

B1F

B3

B3

B3

B3

B3

B3

B3

2.938

2.938

3.125

3.250

3.375

3.625

3.750

3.875

4.063

4.188

4.375

4.688

4.688

5.000

5.000

5.313

5.328

5.500

5.625

6.000

6.000

6.125

6.250

6.563

6.563

6.750

6.875

7.125

7.250

7.375

7.875

-

-

-

-

-

-

-

1.875

2.000

1.781

1.781

2.625

2.094

3.000

3.000

3.156

3.313

3.438

3.500

3.625

3.750

3.938

4.125

4.313

4.438

4.500

4.625

4.938

5.063

5.250

5.375

5.563

5.688

5.750

5.875

6.125

6.500

8.500

10.375

12.250

12.125

17.875

23.500

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1 /2

1 1/4

1 1/4

1 5/8

1 5/8

1 5/8

1 5/8

2

2

2

2

2

2

2

2

2

2

2 5/8

2 5/8

2 5/8

2 5/8

2 5/8

2 5/8

2 5/8

2 5/8

2 5/8

2 5/8

2 5/8

2 5/8

2 5/8

2 5/8

2 5/8

2 15/16

2 15/16

2 15/16

2 15/16

2 15/16

2 15/16

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

0.500

0.500

0.656

0.656

0.656

0.656

0.656

0.656

0.656

0.656

0.156

0.156

0.156

0.656

0.656

0.656

0.781

0.781

0.781

0.781

0.781

0.781

0.781

0.781

0.781

0.781

0.781

0.781

0.781

0.781

0.781

0.844

0.844

0.844

0.844

0.844

0.844

1.000

1.000

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.813

1.813

1.813

1.938

1.938

1.938

1.938

1.938

1.938

1.938

1.938

1.938

1.938

1.938

1.938

1.938

1.938

1.938

2.063

2.063

2.063

2.063

2.063

2.063

0.688

0.688

0.625

0.625

0.625

0.625

0.625

0.625

0.625

0.625

0.063

0.063

0.063

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

0.80

1.10

1.00

1.20

1.40

1.60

1.80

1.90

2.00

2.20

2.40

2.70

3.00

3.60

4.20

4.40

4.60

5.00

5.40

5.80

6.30

6.80

7.30

7.80

8.20

8.60

9.10

9.60

10.00

10.50

12.50

11.00

14.00

20.00

27.00

38.00

49.00

D PAR OL TNUMBER

1 /2” PITCH (H) 3/4” & 1” WIDE BELTS


G-27

I.D.

E W

L

O.D.

P.D.

TYPE - B TYPE - BF

I.D.

E W

L

O.D.

P.D.

F.D.

TYPE - EF

O.D.

I.D.

W

L

E

M

P.D.

F.D.

I.D.

E

W

M

L

O.D.P.D.

TYPE - DF

F.D.

STEEL


1 /2” PITCH (H) 1 1 /2” & 2” WIDE BELTS (QD BUSH)

NEW PART NUMBER

NO. OF TEETH

BUSHINGP.D. O.D.

DIAMETERS

I.D.F.D.

BORES

STOCK MAX.

DIMENSIONS

FACE WIDTH

“W”E L M

WEIGHT

QD14H200

QD16H200

QD18H200

QD20H200

QD22H200

QD24H200

QD26H200

QD28H200

QD30H200

QD32H200

QD36H200

QD40H200

QD44H200

QD48H200

QD60H200

QD72H200

QD84H200

QD96H200

QD120H200

QD156H200

14H200QD-JA

16H200QD-JA

18H200QD-SH

20H200QD-SH

22H200QD-SD

24H200QD-SD

26H200QD-SD

28H200QD-SD

30H200QD-SD

32H200QD-SK

36H200QD-SK

40H200QD-SK

44H200QD-SK

48H200QD-SF

60H200QD-SF

72H200QD-SF

84H200QD-SF

96H200QD-E

120H200QD-E

156H200QD-E

14

16

18

20

22

24

26

28

30

32

36

40

44

48

60

72

84

96

120

156

JA

JA

SH

SH

SD

SD

SD

SD

SD

SK

SK

SK

SK

SF

SF

SF

SF

E

E

E

TYPE

E1F

E1F

E1F

E1F

E1F

E1F

D1F

D1F

D1F

D1F

D1F

D1F

D1F

D1F

D1

D1

D1

D1

D1

D1

2.228

2.546

2.865

3.183

3.501

3.820

4.138

4.456

4.775

5.093

5.730

6.366

7.003

7.639

9.549

11.459

13.369

15.279

19.099

24.828

2.174

2.492

2.811

3.129

3.447

3.766

4.084

4.402

4.721

5.039

5.676

6.312

6.948

7.585

9.495

11.405

13.315

15.225

19.045

24.774

2.469

2.781

3.125

3.375

3.750

4.063

4.375

4.688

5.000

5.313

6.000

6.563

7.250

7.875

-

-

-

-

-

-

---

1.875

2.000

1.781

2.125

3.000

3.313

3.500

3.750

4.125

4.625

5.375

5.875

6.500

8.500

10.375

12.250

14.125

17.875

23.500

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

7/8

7/8

7/8

1 1/4

1 1/4

1 5/8

1 5/8

2

2

2

2

2

2 5/8

2 5/8

2 5/8

2 5/8

2 15/16

2 15/16

2 15/16

2 15/16

3 1/2

3 1/2

3 ½

2.344

2.344

2.344

2.344

2.344

2.344

2.344

2.344

2.344

2.344

2.344

2.344

2.344

2.344

2.344

2.344

2.344

2.344

2.344

2.344

0.500

0.500

0.656

0.656

0.656

0.656

0.031

0.031

0.094

0.094

0.094

0.094

0.094

0.281

0.281

0.281

0.281

0.781

0.781

0.781

1.000

1.000

1.313

1.313

1.813

1.813

1.813

1.813

1.813

1.938

1.938

1.938

1.938

2.063

2.063

2.063

2.063

2.750

2.750

2.750

1.719

1.719

1.656

1.656

1.094

1.094

0.563

0.563

0.625

0.500

0.500

0.500

0.500

0.469

0.469

0.469

0.469

0.344

0.344

0.344

1.60

1.90

2.30

2.70

3.00

3.40

3.80

5.30

6.20

6.90

8.00

10.30

12.50

15.00

16.00

21.00

23.00

34.00

42.00

60.00

D PAR OL TNUMBER


NEW PART NUMBER

NO. OF TEETH

BUSHINGP.D. O.D.

DIAMETERS

I.D.F.D.

BORES

STOCK MAX.

DIMENSIONS

FACE WIDTH

“W”E L M

WEIGHT

QD14H150

QD16H150

QD18H150

QD20H150

QD22H150

QD24H150

QD26H150

QD28H150

QD30H150

QD32H150

QD36H150

QD40H150

QD44H150

QD48H150

QD60H150

QD72H150

QD84H150

QD96H150

QD120H150

QD156H150

14H150QD-JA

16H150QD-JA

18H150QD-SH

20H150QD-SH

22H150QD-SD

24H150QD-SD

26H150QD-SD

28H150QD-SD

30H150QD-SD

32H150QD-SK

36H150QD-SK

40H150QD-SK

44H150QD-SK

48H150QD-SK

60H150QD-SF

72H150QD-SF

84H150QD-SF

96H150QD-SF

120H150QD-SF

156H150QD-SF

14

16

18

20

22

24

26

28

30

32

36

40

44

48

60

72

84

96

120

156

JA

JA

SH

SH

SD

SD

SD

SD

SD

SK

SK

SK

SK

SK

SF

SF

SF

SF

SF

SF

TYPE

E1F

E1F

E1F

E1F

E1F

E1F

D1F

D1F

B1F

B1F

B1F

B1F

B1F

B2F

D3

D3

D3

D3

D3

D3

2.228

2.546

2.865

3.183

3.501

3.820

4.138

4.456

4.775

5.093

5.730

6.366

7.003

7.639

9.549

11.459

13.369

15.279

19.099

24.828

2.174

2.492

2.811

3.129

3.447

3.766

4.084

4.402

4.721

5.039

5.676

6.312

6.948

7.585

9.495

11.405

13.315

15.225

19.045

24.774

2.469

2.781

3.125

3.625

3.750

4.063

4.375

4.688

5.000

5.313

6.000

6.563

7.250

7.875

-

-

-

-

-

-

---

1.875

2.000

1.781

2.125

3.000

3.313

3.500

3.750

4.125

4.625

5.375

5.875

6.500

8.500

10.375

12.250

14.125

17.875

23.500

1 /2

1 /2

1 /2

1 /2

1 /2

1 /2

1 /2

1 /2

1 /2

1 /2

1 /2

1 /2

1 /2

1 /2

1 /2

1 /2

1 /2

1 /2

1 /2

1 /2 1 1/4

1 1/4

1 5/8

1 5/8

2

2

2

2

2

2 5/8

2 5/8

2 5/8

2 5/8

2 5/8

2 15/16

2 15/16

2 15/16

2 15/16

2 15/16

2 15/16

1.813

1.813

1.813

1.813

1.813

1.813

1.813

1.813

1.813

1.813

1.813

1.813

1.813

1.813

1.813

1.813

1.813

1.813

1.813

1.813

0.500

0.500

0.656

0.656

0.656

0.656

0.156

0.156

0.656

0.219

0.219

0.219

0.219

0.219

0.563

0.563

0.563

0.563

0.563

0.563

1.000

1.000

1.313

1.313

1.813

1.813

1.813

1.813

1.813

1.938

1.938

1.938

1.938

1.938

2.063

2.063

2.063

2.063

2.063

2.063

1.188

1.188

1.125

1.125

0.563

0.563

0.063

0.063

-

-

-

-

-

-

0.281

0.281

0.281

0.281

0.281

0.281

1.00

1.50

1.70

2.30

2.70

3.10

3.40

4.00

5.30

5.00

7.00

9.00

11.00

14.00

13.00

17.00

22.50

31.00

45.00

54.50

D PAR OL TNUMBER



G-28

TYPE - BF

I.D.

E W

L

O.D.

P.D.

F.D.

TYPE - EF

O.D.

I.D.

W

L

E

M

P.D.

F.D.

I.D.

E

W

M

L

O.D.P.D.

TYPE - D

I.D.

E

W

M

L

O.D.P.D.

TYPE - DF

F.D.

STEEL


1 /2” PITCH (H) 3” WIDE BELTS (QD BUSH)

NEW PART NUMBER

NO. OF TEETH

BUSHINGP.D. O.D.

DIAMETERS

I.D.F.D.

BORES

STOCK MAX.

DIMENSIONS

FACE WIDTH

“W”E L M

WEIGHT

QD22H300

QD24H300

QD26H300

QD28H300

QD30H300

QD32H300

QD36H300

QD40H300

QD44H300

QD48H300

QD60H300

QD72H300

QD84H300

QD96H300

QD120H300

QD156H300

22H300QD-SD

24H300QD-SD

26H300QD-SD

28H300QD-SD

30H300QD-SD

32H300QD-SK

36H300QD-SK

40H300QD-SK

44H300QD-SK

48H300QD-SF

60H300QD-SF

72H300QD-SF

84H300QD-SF

96H300QD-E

120H300QD-E

156H300QD-E

22

24

26

28

30

32

36

40

44

48

60

72

84

96

120

156

TYPE

E1F

E1F

D1F

D1F

D1F

D1F

D1F

D1F

D1F

D1F

D1

D1

D1

D1

D1

D1

SD

SD

SD

SD

SD

SK

SK

SK

SK

SF

SF

SF

SF

E

E

E

3.501

3.820

4.138

4.456

4.775

5.093

5.730

6.366

7.003

7.639

9.549

11.459

13.369

15.279

19.099

24.828

3.447

3.766

4.084

4.402

4.721

5.039

5.676

6.312

6.948

7.585

9.495

11.405

13.315

15.225

19.045

24.774

3.750

4.063

4.375

4.688

5.000

5.313

6.000

6.563

7.250

7.875

-

-

-

-

-

-

2.125

3.000

3.313

3.500

3.750

4.125

4.625

5.375

5.875

6.500

8.500

10.375

12.250

14.125

17.875

23.500

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

7/8

7/8

7/8

2

2

2

2

2

2 5/8

2 5/8

2 5/8

2 5/8

2 15/16

2 15/16

2 15/16

2 15/16

3 1/2

3 1/2

3 1 /2

2.344

2.344

2.344

2.344

2.344

2.344

2.344

2.344

2.344

2.344

2.344

2.344

2.344

2.344

2.344

2.344

0.656

0.656

0.031

0.031

0.094

0.094

0.094

0.094

0.094

0.281

0.281

0.281

0.281

0.781

0.781

0.781

1.813

1.813

1.813

1.813

1.813

1.938

1.938

1.938

1.938

2.063

2.063

2.063

2.063

2.750

2.750

2.750

2.538

2.538

1.500

1.500

1.063

1.063

1.063

1.063

1.063

1.063

1.063

1.063

1.063

0.875

0.875

0.875

4.20

4.80

5.60

7.00

7.70

7.80

10.00

12.50

15.50

17.00

18.00

23.00

30.00

38.00

51.00

69.00

D PA OL RTNU BEM R



G-29

TYPE - EF

O.D.

I.D.

W

L

E

M

P.D.

F.D.

I.D.

E

W

M

L

O.D.P.D.

TYPE - D

I.D.

E

W

M

L

O.D.P.D.

TYPE - DF

F.D.

STEEL


1 /2” PITCH (H) 3/4” & 1” WIDE BELTS (SPLIT TAPER BUSH)

14H100ST-G

16H100ST-G

18H100ST-H

20H100ST-H

22H100ST-H

22H100ST-P1

24H100ST-H

24H100ST-P1

26H100ST-H

26H100ST-P1

28H100ST-H

28H100ST-P1

30H100ST-H

30H100ST-P1

32H100ST-Q1

36H100ST-Q1

40H100ST-Q1

44H100ST-Q1

48H100ST-Q1

60H100ST-Q1

72H100ST-Q1

84H100ST-Q1

96H100ST-Q1

120H100ST-Q1

156H100ST-Q1

14

16

18

20

22

22

24

24

26

26

28

28

30

30

32

36

4

44

48

60

72

84

96

120

156

4

4

4

4

16

6

16

6

16

6

16

6

16

6

7

7

7

7

7

13

13

13

13

13

13

2.228

2.546

2.856

3.183

3.501

3.501

3.820

3.820

4.138

4.138

4.456

4.456

4.775

4.775

5.093

5.730

6.366

7.003

7.639

9.549

11.459

13.369

15.279

19.099

24.828

2.174

2.492

2.811

3.129

3.447

3.447

3.766

3.766

4.084

4.084

4.402

4.402

4.721

4.721

5.093

5.676

6.312

6.949

7.585

9.495

11.405

13.315

15.225

19.045

24.774

2.438

2.875

3.125

3.375

3.813

3.813

4.063

4.063

4.375

4.375

4.688

4.688

5.000

5.000

5.313

6.000

6.563

7.250

7.875

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

8.688

10.563

12.500

14.375

18.188

23.938

1.875

1.875

1.875

1.875

1.438

2.125

1.438

2.125

1.438

2.125

1.438

2.125

1.438

2.125

2.781

2.781

2.781

2.781

2.781

2.781

2.781

2.781

2.781

2.781

2.781

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.000

1.000

1.250

1.250

1.250

1.938

1.250

1.938

1.250

1.938

1.250

1.938

1.250

1.938

2.500

2.500

2.500

2.500

2.500

2.500

2.500

2.500

2.500

2.500

2.500

0.438

0.438

0.438

0.438

0.000

0.625

0.000

0.625

0.000

0.625

0.000

0.625

0.000

0.625

0.750

0.750

0.750

0.750

0.750

1.000

1.000

1.000

1.000

1.000

1.000

0.688

0.688

0.438

0.438

0.000

0.063

0.000

0.063

0.000

0.063

0.000

0.063

0.000

0.063

0.500

0.500

0.500

0.500

0.500

0.250

0.250

0.250

0.250

0.250

0.250

2.000

2.000

2.500

2.500

2.500

3.000

2.500

3.000

2.500

3.000

2.500

3.000

2.500

3.000

4.125

4.125

4.125

4.125

4.125

4.125

4.125

4.125

4.125

4.125

4.125

-

-

-

-

0.438

-

0.438

-

0.438

-

0.438

-

0.438

-

-

-

-

-

-

0.750

0.750

0.750

0.750

0.750

0.750

-

-

-

-

0.813

-

0.813

-

0.813

-

0.813

-

0.813

-

1.750

1.750

1.750

1.750

1.750

1.750

1.750

1.750

1.750

1.750

1.750

0.188

0.188

0.188

0.188

0.188

0.250

0.188

0.250

0.188

0.250

0.188

0.250

0.188

0.250

0.281

0.281

0.281

0.281

0.281

0.281

0.281

0.281

0.281

0.281

0.281

G

G

H

H

H

P1

H

P1

H

P1

H

P1

H

P1

Q1

Q1

Q1

Q1

Q1

Q1

Q1

Q1

Q1

Q1

Q1

0.80

1.30

1.40

1.80

2.00

2.20

2.60

2.80

3.10

3.50

3.80

4.20

4.50

4.90

5.00

6.40

8.50

10.00

12.30

13.00

15.30

19.50

20.60

25.80

34.00

P.D.F.D.

O.D. H

C L E

O.L.

F P

TYPE - 4

P.D.F.D.

O.D. H

L E

O.L.

F PCX

TYPE - 7

P.D.

H

L

O.D.

I.D.

FX

P

G

EO.L.

C

TYPE - 13 TYPE - 16

P.D.F.D.

H

C L EO.L.

F P

O.D.

X G

TYPE - 6

P.D.F.D.

H

L EO.L.

F PC

O.D.

1 /2” PITCH (H)3/4” & 1” WIDE BELTS

NEW PART NUMBER

NO. OF TEETH

TYPEP.D. O.D.

DIAMETERS

I.D.F.D.

DIMENSIONS



14HG100

16HG100

18HH100

20HH100

22HH100

22HP100

24HH100

24HP100

26HH100

26HP100

28HH100

28HP100

30HH100

30HP100

32HQ100

36HQ100

40HQ100

44HQ100

48HQ100

60HQ100

72HQ100

84HQ100

96HQ100

120HQ100

156HQ100

G-30

Bore Range

Bushing Bore Range

G 3/8" to 1"

H 3/8" to 1 1/2"

P1 1 /2" to 1 3/4"

Q1 3/4” to 2 11/16

STEEL


1 /2” PITCH (H) 1 1 /2” WIDE BELTS (SPLIT TAPER BUSH)

14H150ST-G

16H150ST-G

18H150ST-H

20H150ST-H

22H150ST-H

22H150ST-P1

24H150ST-H

24H150ST-P1

26H150ST-H

26H150ST-P1

28H150ST-H

28H150ST-P1

30H150ST-H

30H150ST-P1

32H150ST-Q1

36H150ST-Q1

40H150ST-Q1

44H150ST-Q1

48H150ST-Q1

60H150ST-Q1

72H150ST-Q1

84H150ST-Q1

96H150ST-Q1

120H150ST-Q1

156H150ST-Q1

14

16

18

20

22

22

24

24

26

26

28

28

30

30

32

36

4

44

48

60

72

84

96

120

156

G

G

H

H

H

P1

H

P1

H

P1

H

P1

H

P1

Q1

Q1

Q1

Q1

Q1

Q1

Q1

Q1

Q1

Q1

Q1

4

4

4

4

16

9

16

9

16

9

16

9

16

9

9

9

9

9

9

13

13

13

13

13

13

2.228

2.546

2.856

3.183

3.501

3.501

3.820

3.820

4.138

4.138

4.456

4.456

4.775

4.775

5.093

5.730

6.366

7.003

7.639

9.549

11.459

13.369

15.279

19.099

24.828

2.174

2.492

2.811

3.129

3.447

3.447

3.766

3.766

4.084

4.084

4.402

4.402

4.721

4.721

5.093

5.676

6.312

6.949

7.585

9.495

11.405

13.315

15.225

19.045

24.774

2.438

2.875

3.125

3.375

3.813

3.813

4.063

4.063

4.375

4.375

4.688

4.688

5.000

5.000

5.313

6.000

6.563

7.250

7.875

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

8.688

10.563

12.500

14.375

18.188

23.938

2.375

2.375

2.375

2.375

1.938

2.625

1.938

2.625

1.938

2.625

1.938

2.625

1.938

2.625

2.781

2.781

2.781

2.781

2.781

2.781

2.781

2.781

2.781

2.781

2.781

1.750

1.750

1.750

1.750

1.750

1.750

1.750

1.750

1.750

1.750

1.750

1.750

1.750

1.750

1.750

1.750

1.750

1.750

1.750

1.750

1.750

1.750

1.750

1.750

1.750

1.000

1.000

1.250

1.250

1.250

1.938

1.250

1.938

1.250

1.938

1.250

1.938

1.250

1.938

2.500

2.500

2.500

2.500

2.500

2.500

2.500

2.500

2.500

2.500

2.500

0.438

0.438

0.438

0.438

0.000

0.625

0.000

0.625

0.000

0.625

0.000

0.625

0.000

0.625

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

1.188

1.188

0.938

0.938

0.500

0.438

0.500

0.438

0.500

0.438

0.500

0.438

0.500

0.438

0.000

0.000

0.000

0.000

0.000

-

-

-

-

-

-

2.000

2.000

2.500

2.500

2.500

3.000

2.500

3.000

2.500

3.000

2.500

3.000

2.500

3.000

4.125

4.125

4.125

4.125

4.125

4.125

4.125

4.125

4.125

4.125

4.125

-

-

-

-

0.438

-

0.438

-

0.438

-

0.438

-

0.438

-

-

-

-

-

-

0.750

0.750

0.750

0.750

0.750

0.750

-

-

-

-

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.750

1.750

1.750

1.750

1.750

1.750

1.750

1.750

1.750

1.750

1.750

0.188

0.188

0.188

0.188

0.188

0.250

0.188

0.250

0.188

0.250

0.188

0.250

0.188

0.250

0.281

0.281

0.281

0.281

0.281

0.281

0.281

0.281

0.281

0.281

0.281

1.30

1.90

2.00

2.60

3.00

3.00

3.90

3.90

4.50

4.90

5.50

5.90

6.50

6.90

6.50

9.10

11.80

15.10

19.00

14.30

16.90

21.40

24.90

29.90

38.00

P.D.F.D.

O.D. H

C L E

O.L.

F P

TYPE - 4

P.D.

H

L

O.D.I.D.

FX

P

G

EO.L.

C

TYPE - 13 TYPE - 16

P.D.F.D.

H

C L EO.L.

F P

O.D.

X G

P.D.F.D.

O.D. H

L E

O.L.

F P

TYPE - 9


NEW PART NUMBER

NO. OF TEETH

TYPEP.D. O.D.

DIAMETERS

I.D.F.D.

DIMENSIONS



14HG150

16HG150

18HH150

20HH150

22HH150

22HP150

24HH150

24HP150

26HH150

26HP150

28HH150

28HP150

30HH150

30HP150

32HQ150

36HQ150

40HQ150

44HQ150

48HQ150

60HQ150

72HQ150

84HQ150

96HQ150

120HQ150

156HQ150

G-31

Bore Range

Bushing Bore Range

G 3/8" to 1"

H 3/8" to 1 1/2"

P1 1 /2" to 1 3/4"

Q1 3/4” to 2 11/16

STEEL


1 /2” PITCH (H) 2” & 3” WIDE BELTS (SPLIT TAPER BUSH)

22H200ST-P1

24H200ST-P1

26H200ST-P1

28H200ST-P1

30H200ST-P1

32H200ST-Q1

36H200ST-Q1

40H200ST-Q1

44H200ST-Q1

48H200ST-Q1

60H200ST-Q1

72H200ST-Q1

84H200ST-Q1

96H200ST-P1

120H200ST-R1

156H200ST-R1

22

24

26

28

30

32

36

40

44

48

60

72

84

96

120

156

6

6

6

6

6

11

11

11

11

11

14

14

14

14

14

14

3.501

3.820

4.138

4.456

4.775

5.093

5.730

6.366

7.003

7.639

9.549

11.459

13.369

15.279

19.099

24.828

3.447

3.766

4.084

4.402

4.721

5.039

5.676

6.312

6.949

7.585

9.495

11.405

13.315

15.225

19.045

24.774

3.813

4.063

4.375

4.688

5.000

5.313

6.000

6.563

7.250

7.875

-

-

-

-

-

-

-

-

-

-

-

4.250

4.500

4.813

5.625

6.375

8.688

10.563

12.500

14.375

18.188

23.938

3.188

3.188

3.188

3.188

3.188

2.781

2.781

2.781

2.781

2.781

3.063

3.063

3.063

3.297

3.297

3.406

2.281

2.281

2.281

2.281

2.281

2.281

2.281

2.281

2.281

2.281

2.281

2.281

2.281

2.281

2.281

2.500

2.938

2.938

2.938

2.938

2.938

2.500

2.500

2.500

2.500

2.500

2.500

2.500

2.500

2.500

2.500

2.500

0.625

0.625

0.625

0.625

0.625

0.219

0.219

0.219

0.219

0.219

0.484

0.484

0.484

0.734

0.734

0.625

0.031

0.031

0.031

0.031

0.031

0.000

0.000

0.000

0.000

0.000

0.266

0.266

0.266

0.141

0.141

0.250

3.000

3.000

3.000

3.000

3.000

4.125

4.125

4.125

4.125

4.125

4.125

4.125

4.125

5.375

5.375

5.375

-

-

-

-

-

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.875

0.875

0.875

-

-

-

-

-

1.750

1.750

1.750

1.750

1.750

1.750

1.750

1.750

2.000

2.000

2.000

0.250

0.250

0.250

0.250

0.250

0.281

0.281

0.281

0.281

0.281

0.281

0.281

0.281

0.281

0.281

0.281

3.90

5.10

6.30

7.70

9.20

6.50

9.40

12.50

15.30

18.80

16.30

20.30

24.00

32.80

38.30

51.00

P2

P2

P2

P2

P2

Q1

Q1

Q1

Q1

Q1

Q1

Q1

Q1

R1

R1

R1

TYPE - 6

P.D.F.D.

H

L EO.L.

F PC

O.D.

P.D.F.D.

O.D.H

L E

F P

O.L.

C X G

I.D.

TYPE - 11

P.D.

H

L

O.D.

I.D.

FX

PG

EO.L.

C

TYPE - 14

P.D.

H

L

O.D.I.D.

FX PG

EO.L.

C

TYPE - 15


NEW PART NUMBER

NO. OF TEETH

TYPEP.D. O.D.

DIAMETERS

I.D.F.D.

DIMENSIONS



32

36

40

44

48

60

72

84

96

120

156

11

11

11

11

11

15

15

15

14

14

14

5.093

5.730

6.366

7.003

7.639

9.549

11.459

13.369

15.279

19.099

24.828

5.039

5.676

6.312

6.949

7.585

9.495

11.405

13.315

15.225

19.045

24.774

5.313

6.000

6.563

7.250

7.875

-

-

-

-

-

-

4.250

4.500

4.813

5.625

6.375

8.688

10.563

12.500

14.375

18.188

23.938

3.594

3.594

3.594

3.594

3.594

3.563

3.563

3.563

3.813

3.813

3.906

3.313

3.313

3.313

3.313

3.313

3.313

3.313

3.313

3.313

3.313

3.500

2.500

2.500

2.500

2.500

2.500

2.500

2.500

2.500

2.875

2.875

2.875

0.000

0.000

0.000

0.000

0.000

0.031

0.031

0.031

0.219

0.219

0.125

0.813

0.813

0.813

0.813

0.813

0.781

0.781

0.781

0.656

0.656

0.750

4.125

4.125

4.125

4.125

4.125

4.125

4.125

4.125

5.375

5.375

5.375

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.875

0.875

0.875

1.750

1.750

1.750

1.750

1.750

1.750

1.750

1.750

2.000

2.000

2.000

0.281

0.281

0.281

0.281

0.281

0.281

0.281

0.281

0.281

0.281

0.281

8.40

11.80

15.90

18.90

21.40

19.30

23.50

29.10

38.00

44.20

59.00

Q1

Q1

Q1

Q1

Q1

Q1

Q1

Q1

R1

R1

R1


NEW PART NUMBER

NO. OF TEETH

TYPEP.D. O.D.

DIAMETERS

I.D.F.D.

DIMENSIONS



22HP200

24HP200

26HP200

28HP200

30HP200

32HQ200

36HQ200

40HQ200

44HQ200

48HQ200

60HQ200

72HQ200

84HQ200

96HR200

120HR200

156HR200

32HQ300

36HQ300

40HQ300

44HQ300

48HQ300

60HQ300

72HQ300

84HQ300

96HR300

120HR300

156HR300

32H300ST-Q1

36H300ST-Q1

40H300ST-Q1

44H300ST-Q1

48H300ST-Q1

60H300ST-Q1

72H300ST-Q1

84H300ST-Q1

96H300ST-R1

120H300ST-R1

156H300ST-R1

G-32

Bore Range

Bushing Bore Range

P2 3/4" to 1 3/4"

Q1 3/4" to 2 11/16"

R1 1 1 /8" to 3 3/4"


ON . OFT ETE H

TYPEP.D.

BORESDIAMETERS

MAX.


WEIGHTL WHUB

DIMENSIONSHUB

PROJ.

16T2.5/10-2

16T2.5/12-2

16T2.5/14-2

16T2.5/15-2

16T2.5/16-2

16T2.5/18-2

16T2.5/19-2

16T2.5/20-2

16T2.5/24-2

16T2.5/25-2

16T2.5/30-2

16T2.5/32-2

16T2.5/36-2

16T2.5/40-2

16T2.5/48-0

16T2.5/60-0

10

12

14

15

16

18

19

20

24

25

30

32

36

40

48

60

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6

6

7.96

9.55

11.14

11.94

12.73

14.32

15.12

15.92

19.10

19.89

23.87

25.47

28.65

31.83

38.20

47.75

7.45

9.00

10.60

11.40

12.20

13.80

14.60

15.40

18.55

19.35

23.35

24.95

28.10

31.30

37.70

47.25

10

13

14

15

16

17

18

19

22

24

28

28

32

35

-

-

10

12

14

15

16

10

10

12

14

14

16

16

20

22

26

34

3

3

3

3

4

4

4

4

4

4

6

6

6

6

6

8

6

6

6

6

8

8

8

8

8

8

8

8

8

8

8

8

16

16

16

16

16

16

16

16

16

16

16

16

16

16

16

16

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

0.002

0.003

0.004

0.004

0.005

0.005

0.005

0.006

0.009

0.009

0.012

0.014

0.018

0.022

0.032

0.049

ALUMINUM

O.D.P.D.

F.D.

LW

C

TYPE - 6F

C

LW

O.D.P.D.

TYPE - 6

2.5mm PITCH (T) 6mm & 10mm WIDE BELTS

2.5mm PITCH (T) 6mm WIDE BELTS

ON . OFT ETE H

TYPEP.D.

BORESDIAMETERS

MAX.


WEIGHTLHUB

DIMENSIONSHUB

PROJ.

20T2.5/10-2

20T2.5/12-2

20T2.5/14-2

20T2.5/15-2

20T2.5/20-2

20T2.5/18-2

20T2.5/19-2

20T2.5/20-2

20T2.5/24-2

20T2.5/25-2

20T2.5/30-2

20T2.5/32-2

20T2.5/36-2

20T2.5/40-2

20T2.5/48-0

20T2.5/60-0

10

12

14

15

16

18

19

20

24

25

30

32

36

40

48

60

7.96

9.55

11.14

11.94

12.73

14.32

15.12

15.92

19.10

19.89

23.87

25.47

28.65

31.83

38.20

47.75

7.45

9.00

10.60

11.40

12.20

13.80

14.60

15.40

18.55

19.35

23.35

24.95

28.10

31.30

37.70

47.25

10

13

14

15

16

17

18

19

22

24

28

28

32

35

-

-

10

12

14

15

16

10

10

12

14

14

16

16

20

22

26

34

3

3

3

3

4

4

4

4

4

4

6

6

6

6

6

8

6

6

6

6

8

8

8

8

8

8

8

8

8

8

8

8

20

20

20

20

20

20

20

20

20

20

20

20

20

20

20

20

14

14

14

14

14

14

14

14

14

14

14

14

14

14

14

14

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

0.002

0.002

0.003

0.003

0.003

0.003

0.003

0.004

0.005

0.006

0.007

0.008

0.011

0.014

0.020

0.030

2.5mm PITCH (T) 10mm WIDE BELTS

W

G-33

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6

6

1 6 T 2 . 5 / 1 0 - 2

Over all Length PitchNo. of teethFlange


ON . OFT ETE H

TYPEP.D.

BORESDIAMETERS

MAX.


WEIGHTLHUB

DIMENSIONSHUB

PROJ.

21 T5/10-2

21 T5/12-2

21 T5/14-2

21 T5/15-2

21 T5/16-2

21 T5/18-2

21 T5/19-2

21 T5/20-2

21 T5/24-2

21 T5/25-2

21 T5/27-2

21 T5/30-2

21 T5/32-2

21 T5/36-2

21 T5/40-2

21 T5/48-0

21 T5/60-0

10

12

14

15

16

18

19

20

24

25

27

30

32

36

40

48

60

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6

6

15.92

19.10

22.29

23.88

25.47

28.65

30.25

31.83

38.21

39.80

42.98

47.76

50.94

57.31

63.66

76.42

95.52

15.05

18.25

21.45

23.05

24.60

27.80

29.40

31.00

37.40

38.95

42.20

46.95

50.10

56.45

62.85

75.55

94.65

20

23

26

28

30

33

34

36

42

43

47

51

55

61

67

-

-

8

12

14

16

18

20

22

24

26

26

30

34

38

38

40

50

65

4

4

6

6

6

6

6

6

6

6

8

8

8

8

8

8

8

8

8

8

8

10

10

10

10

10

10

10

10

10

10

10

10

10

21

21

21

21

21

21

21

21

21

21

21

21

21

21

21

21

21

15

15

15

15

15

15

15

15

15

15

15

15

15

15

15

15

15

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

0.003

0.005

0.006

0.007

0.008

0.011

0.012

0.014

0.019

0.021

0.024

0.030

0.034

0.043

0.052

0.076

0.119

ALUMINUM

O.D.P.D.

F.D.

LW

C

TYPE - 6F

C

LW

O.D.P.D.

TYPE - 6

5mm PITCH (T) 10mm & 16mm WIDE BELTS

5mm PITCH (T) 10mm WIDE BELTS

W

ON . OFT ETE H

TYPEP.D.

BORESDIAMETERS

MAX.


WEIGHTLHUB

DIMENSIONSHUB

PROJ.

27 T5/10-2

27 T5/12-2

27 T5/14-2

27 T5/15-2

27 T5/16-2

27 T5/18-2

27 T5/19-2

27 T5/20-2

27 T5/24-2

27 T5/25-2

27 T5/27-2

27 T5/30-2

27 T5/32-2

27 T5/36-2

27 T5/40-2

27 T5/48-0

27 T5/60-0

10

12

14

15

16

18

19

20

24

25

27

30

32

36

40

48

60

15.92

19.10

22.29

23.88

25.47

28.65

30.25

31.83

38.21

39.80

42.98

47.76

50.94

57.31

63.66

76.42

95.52

15.05

18.25

21.45

23.05

24.60

27.80

29.40

31.00

37.40

38.95

42.20

46.95

50.10

56.45

62.85

75.55

94.65

20

23

26

28

30

33

34

36

42

43

47

51

55

61

67

-

-

8

12

14

16

18

20

22

24

26

26

30

34

38

38

40

50

65

4

4

6

6

6

6

6

6

6

6

8

8

8

8

8

8

8

8

8

8

8

10

10

10

10

10

10

10

10

12

12

12

12

12

27

27

27

27

27

27

27

27

27

27

27

27

27

27

27

27

27

21

21

21

21

21

21

21

21

21

21

21

21

21

21

21

21

21

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

0.003

0.005

0.006

0.007

0.008

0.010

0.012

0.013

0.019

0.021

0.023

0.029

0.033

0.042

0.052

0.075

0.119


W

G-34

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6

6


ON . OFT ETE H

TYPEP.D.

BORESDIAMETERS

MAX.


WEIGHTLHUB

DIMENSIONSHUB

PROJ.

36 T5/10-2

36 T5/12-2

36 T5/14-2

36 T5/15-2

36 T5/16-2

36 T5/18-2

36 T5/19-2

36 T5/20-2

36 T5/24-2

36 T5/25-2

36 T5/27-2

36 T5/30-2

36 T5/32-2

36 T5/36-2

36 T5/40-2

36 T5/48-0

36 T5/60-0

10

12

14

15

16

18

19

20

24

25

27

30

32

36

40

48

60

15.92

19.10

22.29

23.88

25.47

28.65

30.25

31.83

38.21

39.80

42.98

47.76

50.94

57.31

63.66

76.42

95.52

15.05

18.25

21.45

23.05

24.60

27.80

29.40

31.00

37.40

38.95

42.20

46.95

50.10

56.45

62.85

75.55

94.65

20

23

26

28

30

33

34

36

42

43

47

51

55

61

67

-

-

8

12

14

16

18

20

22

24

26

26

30

34

38

38

40

50

65

4

4

6

6

6

6

6

6

8

8

8

8

8

8

8

8

8

-

-

8

8

10

10

10

10

10

10

10

10

12

12

12

12

12

36

36

36

36

36

36

36

36

36

36

36

36

36

36

36

36

36

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

0.003

0.005

0.005

0.006

0.007

0.010

0.011

0.013

0.016

0.018

0.022

0.027

0.032

0.040

0.050

0.074

0.117

ALUMINUM

O.D.P.D.

F.D.

LW

C

TYPE - 6F

C

LW

O.D.P.D.

TYPE - 6



W

G-35

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6

6


ON . OFT ETE H

TYPEP.D.

BORESDIAMETERS

MAX.


WEIGHTLHUB

DIMENSIONSHUB

PROJ.

31 T10/12-2

31 T10/14-2

31 T10/15-2

31 T10/16-2

31 T10/18-2

31 T10/19-2

31 T10/20-2

31 T10/24-2

31 T10/25-2

31 T10/27-2

31 T10/30-2

31 T10/32-2

31 T10/36-2

31 T10/40-2

31 T10/48-0

31 T10/60-0

12

14

15

16

18

19

20

24

25

27

30

32

36

40

48

60

38.20

44.56

47.75

50.93

57.29

60.48

63.66

76.39

79.58

85.95

95.49

101.86

114.59

127.32

152.78

190.98

36.35

42.70

45.90

49.10

55.45

58.65

61.80

74.55

77.75

84.10

93.65

100.00

112.75

125.45

150.95

189.15

42

48

51

55

61

64

67

80

82

90

99

105

118

131

-

-

28

32

32

35

40

44

46

58

60

60

60

65

70

80

95

110

6

8

8

8

8

8

8

8

8

8

8

10

10

10

16

16

8

10

10

10

12

12

12

12

12

12

12

16

16

16

20

20

31

31

31

31

31

31

31

31

31

31

31

31

31

31

31

31

21

21

21

21

21

21

21

21

21

21

21

21

21

21

21

21

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

0.032

0.041

0.047

0.054

0.069

0.078

0.087

0.126

0.137

0.158

0.194

0.219

0.278

0.344

0.486

0.765

ALUMINUM

O.D.P.D.

F.D.

LW

C

TYPE - 6F

C

LW

O.D.P.D.

TYPE - 6



W

ON . OFT ETE H

TYPEP.D.

BORESDIAMETERS

MAX.


WEIGHTLHUB

DIMENSIONSHUB

PROJ.

40 T10/12-2

40 T10/14-2

40 T10/15-2

40 T10/16-2

40 T10/18-2

40 T10/19-2

40 T10/20-2

40 T10/24-2

40 T10/25-2

40 T10/27-2

40 T10/30-2

40 T10/32-2

40 T10/36-2

40 T10/40-2

40 T10/48-0

40 T10/60-0

12

14

15

16

18

19

20

24

25

27

30

32

36

40

48

60

38.20

44.56

47.75

50.93

57.29

60.48

63.66

76.39

79.58

85.95

95.49

101.86

114.59

127.32

152.78

190.98

36.35

42.70

45.90

49.10

55.45

58.65

61.80

74.55

77.75

84.10

93.65

100.00

112.75

125.45

150.95

189.15

42

48

51

55

61

64

67

80

82

90

99

105

118

131

-

-

28

32

32

35

40

44

46

58

60

60

60

65

70

80

95

110

6

8

8

8

8

8

8

8

8

8

8

10

10

10

16

16

8

10

10

10

12

12

12

12

12

12

12

16

16

16

20

20

40

40

40

40

40

40

40

40

40

40

40

40

40

40

40

40

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

0.031

0.040

0.046

0.053

0.068

0.077

0.085

0.125

0.135

0.157

0.193

0.217

0.276

0.342

0.481

0.760


W

G-36

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6

6

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6

6


ON . OFT ETE H

TYPEP.D.

BORESDIAMETERS

MAX.


WEIGHTLHUB

DIMENSIONSHUB

PROJ.

50 T10/18-2

50 T10/19-2

50 T10/20-2

50 T10/24-2

50 T10/25-2

50 T10/27-2

50 T10/30-2

50 T10/32-2

50 T10/36-2

50 T10/40-2

50 T10/48-0

50 T10/60-0

18

19

20

24

25

27

30

32

36

40

48

60

57.29

60.48

63.66

76.39

79.58

85.95

95.49

101.86

114.59

127.32

152.78

190.98

55.45

58.65

61.80

74.55

77.75

84.10

93.65

100.00

112.75

125.45

150.95

189.15

61

64

67

80

82

90

99

105

118

131

-

-

40

44

46

58

60

60

60

65

70

80

95

110

10

10

12

12

12

12

12

12

16

16

16

16

12

12

16

16

16

16

16

16

20

20

20

20

50

50

50

50

50

50

50

50

50

50

50

50

40

40

40

40

40

40

40

40

40

40

40

40

10

10

10

10

10

10

10

10

10

10

10

10

0.063

0.072

0.075

0.115

0.126

0.147

0.183

0.211

0.257

0.323

0.476

0.755

ALUMINUM

O.D.P.D.

F.D.

LW

C

TYPE - 6F

C

LW

O.D.P.D.

TYPE - 6



W

ON . OFT ETE H

TYPEP.D.

BORESDIAMETERS

MAX.


WEIGHTLHUB

DIMENSIONSHUB

PROJ.

66 T10/18-2

66 T10/19-2

66 T10/20-2

66 T10/24-2

66 T10/25-2

66 T10/27-2

66 T10/30-2

66 T10/32-2

66 T10/36-2

66 T10/40-2

66 T10/48-0

66 T10/60-0

18

19

20

24

25

27

30

32

36

40

48

60

57.29

60.48

63.66

76.39

79.58

85.95

95.49

101.86

114.59

127.32

152.78

190.98

55.45

58.65

61.80

74.55

77.75

84.10

93.65

100.00

112.75

125.45

150.95

189.15

61

64

67

80

82

90

99

105

118

131

-

-

40

44

46

58

60

60

60

65

70

80

95

110

10

10

12

12

12

12

12

12

16

16

16

16

12

12

16

16

16

16

16

16

20

20

20

20

66

66

66

66

66

66

66

66

66

66

66

66

56

56

56

56

56

56

56

56

56

56

56

56

10

10

10

10

10

10

10

10

10

10

10

10

0.060

0.068

0.071

0.110

0.121

0.143

0.179

0.206

0.249

0.315

0.467

0.746


W

G-37

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6

6

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6

6


ON . OFT ETE H

TYPEP.D.

BORESDIAMETERS

MAX.


WEIGHTLHUB

DIMENSIONSHUB

PROJ.

38 AT 5/20-2

38 AT 5/22-2

38 AT 5/24-2

38 AT 5/25-2

38 AT 5/27-2

38 AT 5/30-2

38 AT 5/32-2

38 AT 5/36-2

38 AT 5/40-2

38 AT 5/44-2

38 AT 5/48-2

38 AT 5/60-2

38 AT 5/72-2

20

22

24

25

27

30

32

36

40

44

48

60

72

31.83

35.02

38.21

39.80

42.98

47.76

50.94

57.31

63.66

70.05

76.42

95.52

114.62

30.60

33.85

37.00

38.60

41.80

46.55

49.70

56.05

62.45

68.80

75.15

94.25

113.15

36

39

42

43

47

51

55

61

67

74

-

-

-

24

24

26

26

30

34

38

38

40

50

50

65

80

6

6

8

8

8

8

8

8

8

8

8

8

10

10

10

10

10

10

10

10

12

12

12

12

12

16

38

38

38

38

38

38

38

38

38

38

38

38

38

32

32

32

32

32

32

32

32

32

32

32

32

32

6

6

6

6

6

6

6

6

6

6

6

6

6

0.012

0.015

0.016

0.017

0.021

0.027

0.031

0.040

0.050

0.061

0.073

0.116

0.165

ALUMINUM

O.D.P.D.

F.D.

LW

C

TYPE - 6F

C

LW

O.D.P.D.

TYPE - 6

5mm PITCH (AT) 25mm WIDE BELTS


W

G-38

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6

6


0.078

0.096

0.117

0.128

0.150

0.186

0.213

0.262

0.328

0.401

0.480

0.759

ALUMINUM

O.D.P.D.

F.D.

LW

C

TYPE - 6F

C

LW

O.D.P.D.

TYPE - 6

10mm PITCH (AT) 25mm, 32mm & 50mm WIDE BELTS

ON . OFT ETE H

TYPEP.D.

BORESDIAMETERS

MAX.


WEIGHTLHUB

DIMENSIONSHUB

PROJ.

42 AT10/20-2

42 AT10/22-2

42 AT10/24-2

42 AT10/25-2

42 AT10/27-2

42 AT10/30-2

42 AT10/32-2

42 AT10/36-2

42 AT10/40-2

42 AT10/44-2

42 AT10/48-2

42 AT10/60-2

20

22

24

25

27

30

32

36

40

44

48

60

63.66

70.03

76.39

79.58

85.95

95.49

101.86

114.59

127.32

140.05

152.78

190.98

61.80

68.15

74.55

77.75

84.10

93.65

100.00

112.75

125.45

138.20

150.95

189.10

67

74

80

82

90

99

105

118

131

144

-

-

46

50

58

60

60

60

65

70

80

90

95

110

12

12

12

12

12

12

12

16

16

16

16

16

16

16

16

16

16

16

16

20

20

20

20

20

42

42

42

42

42

42

42

42

42

42

42

42

32

32

32

32

32

32

32

32

32

32

32

32

10

10

10

10

10

10

10

10

10

10

10

10


W

ON . OFT ETE H

TYPEP.D.

BORESDIAMETERS

MAX.


WEIGHTLHUB

DIMENSIONSHUB

PROJ.

50 AT10/20-2

50 AT10/22-2

50 AT10/24-2

50 AT10/25-2

50 AT10/27-2

50 AT10/30-2

50 AT10/32-2

50 AT10/36-2

50 AT10/40-2

50 AT10/44-2

50 AT10/48-2

50 AT10/60-2

20

22

24

25

27

30

32

36

40

44

48

60

63.66

70.03

76.39

79.58

85.95

95.49

101.86

114.59

127.32

140.05

152.78

190.98

61.80

68.15

74.55

77.75

84.10

93.65

100.00

112.75

125.45

138.20

150.95

189.10

67

74

80

82

90

99

105

118

131

144

-

-

46

50

58

60

60

60

65

70

80

90

95

110

12

12

12

12

12

12

12

16

16

16

16

16

16

16

16

16

16

16

16

20

20

20

20

20

50

50

50

50

50

50

50

50

50

50

50

50

40

40

40

40

40

40

40

40

40

40

40

40

10

10

10

10

10

10

10

10

10

10

10

10

0.075

0.094

0.115

0.126

0.147

0.183

0.211

0.257

0.323

0.397

0.476

0.754


W

ON . OFT ETE H

TYPEP.D.

BORESDIAMETERS

MAX.


WEIGHTL WHUB

DIMENSIONSHUB

PROJ.

70 AT10/20-2

70 AT10/22-2

70 AT10/24-2

70 AT10/25-2

70 AT10/27-2

70 AT10/30-2

70 AT10/32-2

70 AT10/36-2

70 AT10/40-2

70 AT10/44-2

70 AT10/48-2

70 AT10/60-2

20

22

24

25

27

30

32

36

40

44

48

60

63.66

70.03

76.39

79.58

85.95

95.49

101.86

114.59

127.32

140.05

152.78

190.98

61.80

68.15

74.55

77.75

84.10

93.65

100.00

112.75

125.45

138.20

150.95

189.10

67

74

80

82

90

99

105

118

131

144

-

-

46

50

58

60

60

60

65

70

80

90

95

110

12

12

12

12

12

12

12

12

12

12

16

16

16

16

16

16

16

16

16

16

20

20

20

20

70

70

70

70

70

70

70

70

70

70

70

70

60

60

60

60

60

60

60

60

60

60

60

60

10

10

10

10

10

10

10

10

10

10

10

10

0.069

0.088

0.109

0.120

0.141

0.177

0.204

0.263

0.329

0.403

0.465

0.743


G-39

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6

6

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6

6

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6

6


3mm PITCH (HTD) 6mm WIDE BELTS


ALUMINUM

P.D.

WL

B CO.D.

#8-32 SET SCREW

TYPE - 6

G-40

DIAMETERS


WEIGHT PART

NUMBERTYPE

ON . OFT ET /E H

V SGROO E

BORES

STOCK MAX.

DIMENSIONS

FACE WIDTH “W”


18-3M06-6A

19-3M06-6A

20-3M06-6A

22-3M06-6A

24-3M06-6A

25-3M06-6A

26-3M06-6A

28-3M06-6A

30-3M06-6A

32-3M06-6A

34-3M06-6A

36-3M06-6A

38-3M06-6A

40-3M06-6A

44-3M06-6A

48-3M06-6A

50-3M06-6A

56-3M06-6A

60-3M06-6A

62-3M06-6A

68-3M06-6A

72-3M06-6A

80-3M06-6A

18

19

20

22

24

25

26

28

30

32

34

36

38

40

44

48

50

56

60

62

68

72

80

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

0.647

0.684

0.722

0.797

0.872

0.910

0.947

1.023

1.098

1.173

1.248

1.323

1.399

1.474

1.624

1.775

1.850

2.075

2.226

2.301

2.527

2.677

2.979

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

0.442

0.468

0.500

0.562

0.625

0.625

0.625

0.701

0.776

0.851

0.921

1.000

1.075

1.150

1.300

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

5/16

5/16

5/16

5/16

5/16

5/16

5/16

5/16

1/4

1/4

5/16

5/16

3/8

3/8

3/8

7/16

7/16

1/2

9/16

5/8

5/8

11/16

13/16

3/4

3/4

3/4

3/4

3/4

3/4

3/4

3/4

0.386

0.386

0.386

0.386

0.386

0.386

0.386

0.386

0.386

0.386

0.407

0.407

0.407

0.407

0.407

0.407

0.407

0.407

0.407

0.407

0.407

0.407

0.407


0.677

0.714

0.752

0.827

0.902

0.940

0.977

1.053

1.128

1.203

1.278

1.353

1.429

1.504

1.654

1.805

1.880

2.105

2.256

2.331

2.557

2.707

3.009

0.688

0.688

0.688

0.688

0.688

0.688

0.688

0.688

0.688

0.688

0.719

0.719

0.719

0.719

0.719

0.734

0.734

0.734

0.734

0.734

0.734

0.734

0.734

0.01

0.02

0.02

0.02

0.03

0.03

0.03

0.04

0.05

0.05

0.06

0.07

0.08

0.10

0.12

0.13

0.14

0.17

0.19

0.20

0.23

0.26

0.31

1 8 - 3 M 0 6 - 6 A





ALUMINUM

P.D.

B C

WL

F.D.

.40

O.D.

SET SCREW

TYPE - 6F

P.D.C B

L

.40

F.D.

O.D.

SET SCREW

TYPE - 6C

DIAMETERS


WEIGHT PART

NUMBERTYPE

ON . OFT ET /E H

V SGROO E

BORES

STOCK MAX.

DIMENSIONS

FACE WIDTH “W”



10-3M09-6CA

11-3M09-6CA

12-3M09-6CA

13-3M09-6CA

14-3M09-6CA

15-3M09-6CA

16-3M09-6CA

17-3M09-6CA

18-3M09-6FA

19-3M09-6CA

20-3M09-6FA

22-3M09-6FA

24-3M09-6FA

25-3M09-6FA

26-3M09-6FA

28-3M09-6FA

30-3M09-6FA

32-3M09-6FA

34-3M09-6FA

36-3M09-6FA

38-3M09-6FA

40-3M09-6FA

44-3M09-6FA

10

11

12

13

14

15

16

17

18

19

20

22

24

25

26

28

30

32

34

36

38

40

44

6C

6C

6C

6C

6C

6C

6C

6C

6F

6C

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

0.376

0.414

0.451

0.489

0.526

0.564

0.602

0.639

0.677

0.714

0.752

0.827

0.902

0.940

0.977

1.053

1.128

1.203

1.278

1.353

1.429

1.504

1.654

0.346

0.384

0.421

0.459

0.496

0.534

0.572

0.609

0.647

0.684

0.722

0.797

0.872

0.910

0.947

1.023

1.098

1.173

1.248

1.323

1.399

1.474

1.624

0.505

0.530

0.580

0.610

0.635

0.685

0.710

0.740

0.790

0.815

0.895

0.945

1.025

1.060

1.105

1.173

1.250

1.323

1.398

1.473

1.549

1.625

1.775

0.505

0.530

0.580

0.610

0.635

0.685

0.710

0.740

0.442

0.468

0.500

0.562

0.625

0.625

0.625

0.701

0.776

0.851

0.921

1.000

1.075

1.150

1.300

1/8

1/8

3/16

3/16

3/16

3/16

3/16

3/16

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

-

-

-

-

-

-

-

-

1/4

-

5/16

5/16

3/8

3/8

3/8

7/16

7/16

1/2

9/16

5/8

5/8

11/16

13/16

0.688

0.688

0.688

0.688

0.688

0.688

0.688

0.688

0.812

0.812

0.812

0.812

0.812

0.812

0.812

0.812

0.812

0.812

0.844

0.844

0.844

0.844

0.844

-

-

-

-

-

-

-

-

0.506

0.506

0.506

0.506

0.506

0.506

0.506

0.506

0.506

0.506

0.527

0.527

0.527

0.527

0.527

0.01

0.01

0.02

0.02

0.02

0.02

0.02

0.03

0.02

0.02

0.02

0.03

0.04

0.04

0.04

0.05

0.06

0.07

0.08

0.09

0.10

0.11

0.14

G-41




ALUMINUM

P.D.

WL

B CO.D.

#8-32SET SCREW

TYPE - 6

DIAMETERS


WEIGHT PART

NUMBERTYPE

ON . OFT ET /E H

V SGROO E

BORES

STOCK MAX.

DIMENSIONS

FACE WIDTH “W”


18-3M09-6A

19-3M09-6A

20-3M09-6A

22-3M09-6A

24-3M09-6A

25-3M09-6A

26-3M09-6A

28-3M09-6A

30-3M09-6A

32-3M09-6A

34-3M09-6A

36-3M09-6A

38-3M09-6A

40-3M09-6A

44-3M09-6A

45-3M09-6A

48-3M09-6A

50-3M09-6A

56-3M09-6A

60-3M09-6A

62-3M09-6A

68-3M09-6A

72-3M09-6A

80-3M09-6A

18

19

20

22

24

25

26

28

30

32

34

36

38

40

44

45

48

50

56

60

62

68

72

80

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

0.677

0.714

0.752

0.827

0.902

0.940

0.977

1.053

1.128

1.203

1.278

1.353

1.429

1.504

1.654

1.692

1.805

1.880

2.105

2.256

2.331

2.56

2.707

3.01

0.647

0.684

0.722

0.797

0.872

0.910

0.947

1.023

1.098

1.173

1.248

1.323

1.399

1.474

1.624

1.662

1.775

1.850

2.075

2.226

2.301

2.527

2.677

2.979

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

0.442

0.468

0.500

0.562

0.625

0.625

0.625

0.701

0.776

0.851

0.921

1.000

1.075

1.150

1.300

1.300

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

5/16

5/16

5/16

5/16

5/16

5/16

5/16

5/16

1/4

1/4

5/16

5/16

3/8

3/8

3/8

7/16

7/16

1/2

9/16

5/8

5/8

11/16

13/16

13/16

3/4

3/4

3/4

3/4

3/4

3/4

3/4

3/4

0.812

0.812

0.812

0.812

0.812

0.812

0.812

0.812

0.812

0.812

0.844

0.844

0.844

0.844

0.844

0.844

0.875

0.875

0.875

0.875

0.875

0.875

0.875

0.875

0.506

0.506

0.506

0.506

0.506

0.506

0.506

0.506

0.506

0.506

0.527

0.527

0.527

0.527

0.527

0.527

0.500

0.500

0.500

0.500

0.500

0.500

0.500

0.500

0.02

0.02

0.02

0.03

0.03

0.04

0.04

0.05

0.06

0.07

0.08

0.09

0.10

0.12

0.14

0.15

0.16

0.17

0.20

0.23

0.24

0.28

0.31

0.38


G-42




ALUMINUM

DIAMETERS


WEIGHT PART

NUMBERTYPE

ON . OFT ET /E H

V SGROO E

BORES

STOCK MAX.

DIMENSIONS

FACE WIDTH “W”

NOTE : Pulleys with 12 and 13 grooves have 1set screw; others have 2 at 90 .


12-5M09-6FA

13-5M09-6FA

14-5M09-6FA

15-5M09-6FA

16-5M09-6FA

17-5M09-6FA

18-5M09-6FA

19-5M09-6FA

20-5M09-6FA

22-5M09-6FA

24-5M09-6FA

25-5M09-6FA

26-5M09-6FA

28-5M09-6FA

30-5M09-6FA

32-5M09-6FA

34-5M09-6FA

12

13

14

15

16

17

18

19

20

22

24

25

26

28

30

32

34

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

0.752

0.815

0.877

0.940

1.003

1.065

1.128

1.191

1.253

1.379

1.504

1.566

1.629

1.754

1.880

2.005

2.130

0.707

0.770

0.832

0.895

0.958

1.020

1.083

1.146

1.208

1.334

1.459

1.521

1.584

1.709

1.835

1.960

2.085

0.875

0.938

1.000

1.063

1.094

1.188

1.250

1.313

1.375

1.500

1.625

1.688

1.750

1.875

2.000

2.125

2.250

0.438

0.500

0.500

0.563

0.563

0.625

0.688

0.750

0.813

0.938

1.000

1.000

1.063

1.188

1.188

1.250

1.375

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

5/16

5/16

5/16

5/16

3/8

7/16

7/16

1/2

9/16

5/8

5/8

5/8

3/4

3/4

3/4

13/16

0.797

0.797

0.797

0.797

0.797

0.797

0.797

0.797

0.797

0.797

0.859

0.859

0.859

0.859

0.859

0.859

0.859

0.547

0.547

0.547

0.547

0.547

0.547

0.547

0.547

0.547

0.547

0.547

0.547

0.547

0.547

0.547

0.547

0.547

0.02

0.03

0.03

0.04

0.04

0.05

0.05

0.06

0.07

0.09

0.11

0.12

0.13

0.15

0.17

0.19

0.22

TYPE - 6F

G-43

.42

LW

CBO.D.

P.D.F.D.




ALUMINUM

P.D.

CB

L

W

O.D.

SET SCREW

TYPE - 6W

P.D.

WL

B CO.D.

SET SCREW

TYPE - 6

DIAMETERS


WEIGHT PART

NUMBERTYPE

ON . OFT ET /E H

V SGROO E

BORES

STOCK MAX.

DIMENSIONS

FACE WIDTH “W”


12-5M09-6A

13-5M09-6A

14-5M09-6A

15-5M09-6A

16-5M09-6A

17-5M09-6A

18-5M09-6A

19-5M09-6A

20-5M09-6A

22-5M09-6A

24-5M09-6A

25-5M09-6A

26-5M09-6A

28-5M09-6A

30-5M09-6A

32-5M09-6A

34-5M09-6A

36-5M09-6A

38-5M09-6A

40-5M09-6A

44-5M09-6A

48-5M09-6A

50-5M09-6A

56-5M09-6A

60-5M09-6A

62-5M09-6A

70-5M09-6A

72-5M09-6A

12

13

14

15

16

17

18

19

20

22

24

25

26

28

30

32

34

36

38

40

44

48

50

56

60

62

70

72

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6W

6W

6W

6W

6W

6W

6W

6W

0.752

0.815

0.877

0.940

1.003

1.065

1.128

1.191

1.253

1.379

1.504

1.566

1.629

1.754

1.880

2.005

2.130

2.256

2.381

2.506

2.757

3.008

3.133

3.509

3.760

3.885

4.386

4.511

0.707

0.770

0.832

0.895

0.958

1.020

1.083

1.146

1.208

1.334

1.459

1.521

1.584

1.709

1.835

1.960

2.085

2.211

2.336

2.461

2.712

2.963

3.088

3.464

3.715

3.840

4.341

4.466

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

0.438

0.500

0.500

0.563

0.563

0.625

0.688

0.750

0.813

0.938

1.000

1.000

1.063

1.188

1.188

1.250

1.375

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

5/16

5/16

5/16

5/16

3/8

3/8

3/8

3/8

3/8

3/8

3/8

0.797

0.797

0.797

0.797

0.797

0.797

0.797

0.797

0.797

0.797

0.859

0.859

0.859

0.859

0.859

0.859

0.859

0.938

0.938

0.938

0.938

0.938

0.938

0.938

0.938

0.938

0.938

0.938

0.547

0.547

0.547

0.547

0.547

0.547

0.547

0.547

0.547

0.547

0.547

0.547

0.547

0.547

0.547

0.547

0.547

0.547

0.547

0.547

0.547

0.547

0.547

0.547

0.547

0.547

0.547

0.547

0.02

0.03

0.03

0.04

0.04

0.05

0.05

0.06

0.07

0.08

0.11

0.12

0.13

0.15

0.17

0.19

0.22

0.26

0.29

0.31

0.37

0.10

0.46

0.56

0.63

0.67

0.84

0.89

1/4

5/16

5/16

5/16

5/16

3/8

7/16

7/16

1/2

1/2

5/8

5/8

5/8

11/16

11/16

3/4

13/16

15/16

15/16

15/16

15/16

15/16

15/16

15/16

15/16

15/16

15/16

15/16


G-44




ALUMINUM

TYPE - 6F

DIAMETERS


WEIGHT PART

NUMBERTYPE

ON . OFT ET /E H

V SGROO E

BORES

STOCK MAX.

DIMENSIONS

FACE WIDTH “W”


12-5M15-6FA

13-5M15-6FA

14-5M15-6FA

15-5M15-6FA

16-5M15-6FA

17-5M15-6FA

18-5M15-6FA

19-5M15-6FA

20-5M15-6FA

22-5M15-6FA

24-5M15-6FA

25-5M15-6FA

26-5M15-6FA

28-5M15-6FA

30-5M15-6FA

32-5M15-6FA

34-5M15-6FA

12

13

14

15

16

17

18

19

20

22

24

25

26

28

30

32

34

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

0.752

0.815

0.877

0.940

1.003

1.065

1.128

1.191

1.253

1.379

1.504

1.566

1.629

1.754

1.880

2.005

2.130

0.707

0.770

0.832

0.895

0.958

1.020

1.083

1.146

1.208

1.334

1.459

1.521

1.584

1.709

1.835

1.960

2.085

0.438

0.500

0.500

0.563

0.563

0.625

0.688

0.750

0.813

0.938

1.000

1.000

1.063

1.188

1.188

1.250

1.375

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

5/16

5/16

5/16

5/16

3/8

7/16

7/16

1/2

9/16

5/8

5/8

5/8

3/4

3/4

3/4

13/16

1.031

1.031

1.031

1.031

1.031

1.031

1.031

1.031

1.031

1.031

1.094

1.094

1.094

1.094

1.094

1.094

1.094

0.781

0.781

0.781

0.781

0.781

0.781

0.781

0.781

0.781

0.781

0.781

0.781

0.781

0.781

0.781

0.781

0.781

0.03

0.04

0.04

0.05

0.06

0.06

0.07

0.08

0.09

0.12

0.15

0.16

0.17

0.20

0.23

0.26

0.30


0.875

0.938

1.000

1.063

1.094

1.188

1.250

1.313

1.375

1.500

1.625

1.688

1.750

1.875

2.000

2.125

2.250

G-45

.65

LW

CBO.D.

P.D.F.D.

STEEL


ON . OFT ETE H

TYPEP.D.

BORESDIAMETERS

MAX.

NEW PART NUMBER O.D. F.D.

SBU HINGSTOCK

WEIGHTL WHUB

DIMENSIONS

18-5M-15-PB-1/4

19-5M-15-PB-1/4

20-5M-15-PB-1/4

21-5M-15-PB-1/4

22-5M-15-PB-1/4

23-5M-15-PB-3/8

24-5M-15-PB-3/8

25-5M-15-PB-3/8

26-5M-15-PB-3/8

28-5M-15-PB-1/2

30-5M-15-PB-1/2

32-5M-15-PB-1/2

34-5M-15-PB-1/2

36-5M-15-PB-1/2

38-5M-15-PB-1/2

40-5M-15-PB-1/2

45-5M-15-PB-1/2

50-5M-15-PB-1/2

18

19

20

21

22

23

24

25

26

28

30

32

34

36

38

40

45

50

MPB

MPB

MPB

MPB

MPB

MPB

MPB

MPB

MPB

MPB

MPB

MPB

MPB

MPB

MPB

MPB

MPB

MPB

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

5mm PITCH (HTD) 15mm TL & 15mm MPB WIDE BELTS

5mm PITCH (HTD) 15mm MPB WIDE BELTS

1.128

1.191

1.253

1.316

1.379

1.441

1.504

1.566

1.629

1.754

1.880

2.005

2.130

2.256

2.381

2.506

2.820

3.133

1.083

1.146

1.208

1.271

1.334

1.396

1.459

1.521

1.584

1.709

1.835

1.960

2.085

2.211

2.336

2.461

2.775

3.088

1.385

1.420

1.510

1.530

1.530

1.660

1.780

1.780

1.900

2.020

2.130

2.130

2.380

2.380

2.610

2.730

3.090

3.330

0.680

0.880

0.900

0.900

0.940

1.150

1.180

1.180

1.210

1.370

1.530

1.550

1.690

1.690

1.960

2.090

2.340

2.650

1/4

1/4

1/4

1/4

1/4

3/8

3/8

3/8

3/8

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1 /2

1.250

1.250

1.250

1.250

1.280

1.280

1.280

1.280

1.280

1.340

1.340

1.340

1.340

1.340

1.340

1.380

1.380

1.380

0.890

0.890

0.890

0.890

0.890

0.890

0.890

0.890

0.890

0.890

0.890

0.890

0.890

0.890

0.890

0.890

0.890

0.890

ON . OFT ETE H

TYPEP.D.

BORESDIAMETERS

MAX.


SBU HINGSTOCK

WEIGHTE M

FACEWIDTH

DIMENSIONS

36-5M-15-TL-1108

38-5M-15-TL-1108

40-5M-15-TL-1108

44-5M-15-TL-1108

48-5M-15-TL-1210

52-5M-15-TL-1210

56-5M-15-TL-1610

60-5M-15-TL-1610

64-5M-15-TL-1610

68-5M-15-TL-1610

72-5M-15-TL-1610

80-5M-15-TL-1610

90-5M-15-TL-1610

112-5M-15-TL-1610

36

38

40

44

48

52

56

60

64

68

72

80

90

112

1108

1108

1108

1108

1210

1210

1610

1610

1610

1610

1610

1610

1610

1610

A1F

A1F

A1F

A1F

B1F

B1F

B1F

B1F

B1F

B1F

B1F

B1

B1

B1

2.256

2.381

2.506

2.757

3.008

3.258

3.509

3.760

4.010

4.261

4.511

5.013

5.639

7.018

2.211

2.336

2.461

2.712

2.963

3.213

3.464

3.715

3.965

4.216

4.466

4.968

5.594

6.973

2.375

2.613

2.733

3.090

3.328

3.566

3.805

4.044

4.170

4.520

4.670

-

-

-

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1 1/8

1 1/8

1 1/8

1 1/8

1 1/4

1 1/4

1 11/16

1 11/16

1 11/16

1 11/16

1 11/16

1 11/16

1 11/16

2 1/8

0.890

0.890

0.890

0.890

0.890

0.890

0.890

0.890

0.890

0.890

0.890

0.890

0.890

0.890

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.11

0.11

0.11

0.11

0.11

0.11

0.11

0.11

0.11

0.36

0.47

0.57

0.68

0.91

1.00

1.30

1.40

1.70

2.10

2.40

2.80

3.70

4.90

8.30

TL 5mm PITCH (HTD) 15mm TL WIDE BELTS

P.D.F.D.

O.D. B

E LMW

H

TYPE - BF

P.D.F.D.

O.D. B

E L MW

TYPE - AF

P.D.O.D. B

E MW

H

TYPE - B

LW

CBO.D.

P.D.F.D.

TYPE - 6F

G-46

7/16

7/16

7/16

7/16

7/16

5/8

3/4

3/4

3/4

3/4

7/8

7/8

7/8

7/8

1

1

1

1/2

0.11

0.12

0.14

0.15

0.17

0.17

0.19

0.21

0.22

0.25

0.29

0.34

0.38

0.43

0.49

0.55

0.70

0.87

ON . OFT ETE H

TYPEP.D.

BORESDIAMETERS

MAX.


SBU HINGSTOCK

WEIGHTE M

FACEWIDTH

DIMENSIONS

36-5M-25-TL-1108

38-5M-25-TL-1108

405M-25-TL-1108

445M-25-TL-1108

48-5M-25-TL-1210

52-5M-25-TL-1210

56-5M-25-TL-1610

60-5M-25-TL-1610

64-5M-25-TL-1610

68-5M-25-TL-2012

72-5M-25-TL-2012

80-5M-25-TL-2012

90-5M-25-TL-2012

112-5M-25-TL-2012

36

38

40

44

48

52

56

60

64

68

72

80

90

112

1108

1108

1108

1108

1210

1210

1610

1610

1610

2010

2010

2010

2010

2010

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1

A1

A1

2.256

2.381

2.506

2.757

3.008

3.258

3.509

3.760

4.010

4.261

4.511

5.013

5.639

7.018

2.211

2.336

2.461

2.712

2.963

3.213

3.464

3.715

3.965

4.216

4.466

4.968

5.594

6.973

2.375

2.613

2.733

3.090

3.328

3.566

3.805

4.044

4.170

4.520

4.670

-

-

-

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1 1/8

1 1/8

1 1/8

1 1/8

1 1/4

1 1/4

1 11/16

1 11/16

1 11/16

2 1/8

2 1/8

2 1/8

2 1/8

2 1/8

1.280

1.280

1.280

1.280

1.280

1.280

1.280

1.280

1.280

1.280

1.280

1.280

1.280

1.280

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.03

0.03

0.03

0.03

0.03

0.41

0.41

0.41

0.41

0.28

0.28

0.28

0.28

0.28

0.00

0.00

0.00

0.00

0.00

0.65

0.73

0.85

1.10

1.20

1.60

1.60

2.10

2.40

2.70

3.30

4.50

6.20

10.70

STEEL


18-5M-25-PB-1/4

19-5M-25-PB-1/4

20-5M-25-PB-1/4

21-5M-25-PB-1/4

22-5M-25-PB-1/4

23-5M-25-PB-3/8

24-5M-25-PB-3/8

25-5M-25-PB-3/8

26-5M-25-PB-3/8

28-5M-25-PB-3/8

30-5M-25-PB-1/2

32-5M-25-PB-1/2

34-5M-25-PB-1/2

36-5M-25-PB-1/2

38-5M-25-PB-1/2

40-5M-25-PB-1/2

45-5M-25-PB-1/2

50-5M-25-PB-1/2

LW

CBO.D.

P.D.F.D.

18

19

20

21

22

23

24

25

26

28

30

32

34

36

38

40

45

50

MPB

MPB

MPB

MPB

MPB

MPB

MPB

MPB

MPB

MPB

MPB

MPB

MPB

MPB

MPB

MPB

MPB

MPB

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

6F

1.128

1.191

1.253

1.316

1.379

1.441

1.504

1.566

1.629

1.754

1.880

2.005

2.130

2.256

2.381

2.506

2.820

3.133

1.083

1.146

1.208

1.271

1.334

1.396

1.459

1.521

1.584

1.709

1.835

1.960

2.085

2.211

2.336

2.461

2.775

3.088

1.385

1.420

1.510

1.530

1.530

1.660

1.780

1.780

1.900

2.020

2.130

2.130

2.380

2.380

2.610

2.730

3.090

3.330

ON . OFT ETE H

TYPEP.D.

BORESDIAMETERS

MAX.


SBU HINGSTOCK

WEIGHTL WHUB

DIMENSIONS

0.680

0.880

0.900

0.900

0.940

1.150

1.180

1.180

1.210

1.370

1.530

1.550

1.690

1.690

1.960

2.090

2.340

2.650

1/4

1/4

1/4

1/4

1/4

3/8

3/8

3/8

3/8

3/8

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1.650

1.650

1.650

1.650

1.680

1.680

1.680

1.680

1.680

1.730

1.730

1.730

1.730

1.730

1.730

1.780

1.780

1.780

1.280

1.280

1.280

1.280

1.280

1.280

1.280

1.280

1.280

1.280

1.280

1.280

1.280

1.280

1.280

1.280

1.280

1.280

5mm PITCH (HTD) 25mm TL & 25mm MPB WIDE BELTS

P.D.F.D.

O.D. B

E L MW

TYPE - AF

P.D.O.D. B

E MW

TYPE - ATYPE - 6F

5mm PITCH (HTD) 25mm MPB WIDE BELTS

5mm PITCH (HTD) 25mm TL WIDE BELTS

G-47

7/16

7/16

7/16

7/16

7/16

5/8

3/4

3/4

3/4

3/4

7/8

7/8

7/8

7/8

1

1

1

1/2

0.15

0.17

0.19

0.21

0.23

0.24

0.27

0.29

0.32

0.37

0.42

0.48

0.54

0.61

0.69

0.77

0.99

1.23

STEEL


5mm PITCH (HTD) 9mm, 15mm, 25mm WIDE BELTS

32-5M-15-6FS6

34-5M-15-6FS6

36-5M-15-6FS6

QD38-5M-15-JA

QD40-5M-15-JA

QD44-5M-15-JA

QD48-5M-15-JA

QD52-5M-15-JA

QD56-5M-15-SH

QD60-5M-15-SH

QD64-5M-15-SH

QD68-5M-15-SDS

QD72-5M-15-SDS

QD80-5M-15-SDS

QD90-5M-15-SDS

QD112-5M-15-SDS

32-5M-15-PB-1/2

34-5M-15-PB-1/2

36-5M-15-PB-1/2

38-5M-15-QD-JA

40-5M-15-QD-JA

44-5M-15-QD-JA

48-5M-15-QD--JA

52-5M-15-QD-JA

56-5M-15-QD-SH

60-5M-15-QD-SH

64-5M-15-QD-SH

68-5M-15-QD-SDS

72-5M-15-QD-SDS

80-5M-15-QD-SDS

90-5M-15-QD-SDS

112-5M-15-QD-SDS

32

34

36

38

40

44

48

52

56

60

64

68

72

80

90

112

D1F

D1F

D1F

E1F

E1F

E1F

C1F

C1F

D1F

D1F

D1F

C1F

C1F

C1

C1

C1

2.005

2.130

2.256

2.381

2.506

2.757

3.008

3.258

3.509

3.760

4.010

4.261

4.511

5.013

5.639

7.018

1.960

2.085

2.211

2.336

2.461

2.712

2.963

3.213

3.464

3.715

3.965

4.216

4.466

4.968

5.594

6.973

2.160

2.290

2.410

2.540

2.660

2.910

3.160

3.410

3.660

3.920

4.160

4.410

4.660

-

-

-

MPB

MPB

MPB

JA

JA

JA

JA

JA

SH

SH

SH

SDS

SDS

SDS

SDS

SDS

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

0.000

0.000

0.000

1.344

1.344

1.344

2.375

2.625

1.813

1.813

1.813

3.250

3.750

4.250

4.875

6.031

1.531

1.688

1.813

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.688

0.688

0.688

0.688

0.688

0.688

0.688

0.688

0.688

0.688

0.688

0.688

0.688

-

-

-

-

-

-

0.563

0.563

0.563

0.563

0.563

0.813

0.813

0.813

0.750

0.750

0.750

0.750

0.750

0.438

0.438

0.438

0.313

0.313

0.313

0.156

0.156

0.656

0.656

0.656

0.531

0.531

0.531

0.531

0.531

0.875

0.875

0.875

0.875

0.875

0.875

0.875

0.875

0.875

0.875

0.875

0.875

0.875

0.875

0.875

0.875

-

-

-

0.000

0.000

0.000

0.313

0.313

0.000

0.000

0.000

0.125

0.125

0.125

0.125

0.125

1.344

1.344

1.344

1.000

1.000

1.000

1.000

1.000

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

0.000

0.000

0.000

0.500

0.500

0.500

0.000

0.000

0.063

0.063

0.063

0.000

0.000

0.000

0.000

0.000

0.25

0.28

0.34

0.61

0.72

0.95

0.97

1.17

1.37

1.68

1.80

2.10

2.43

3.15

4.17

6.75

OLD PART NUMBER

ON . OFT EE TH

Y ET PP.D.

BORES

WEIGHT

DIAMETERS

MAX.


BUSHINGSTOCK

DIMENSIONS

A C W D E F K L M

7/8

1

1

1 1/4

1 1/4

1 1/4

1 1/4

1 1/4

1 11/16

1 11/16

1 11/16

2

2

2

2

2

32-5M25-6FS6

34-5M25-6FS6

36-5M25-6FS6

QD38-5M-25-JA

QD40-5M-25-JA

QD44-5M-25-JA

QD48-5M-25-JA

QD52-5M-25-JA

QD56-5M-25-SH

QD60-5M-25-SH

QD64-5M-25-SH

QD68-5M-25-SDS

QD72-5M-25-SDS

QD80-5M-25-SDS

QD90-5M-25-SDS

QD112-5M-25-SDS

32-5M-25-PB-1/2

34-5M-25-PB-1/2

36-5M-25-PB-1/2

38-5M-25-QD-JA

40-5M-25-QD-JA

44-5M-25-QD-JA

48-5M-25-QD-JA

52-5M-25-QD-JA

56-5M-25-QD-SH

60-5M-25-QD-SH

64-5M-25-QD-SH

68-5M-25-QD-SDS

72-5M-25-QD-SDS

80-5M-25-QD-SDS

90-5M-25-QD-SDS

112-5M-25-QD-SDS

32

34

36

38

40

44

48

52

56

60

64

68

72

80

90

112

D1F

D1F

D1F

E1F

E1F

E1F

B1F

B1F

D1F

D1F

D1F

C1F

C1F

C1

C1

C2

2.005

2.130

2.256

2.381

2.506

2.757

3.008

3.258

3.509

3.760

4.010

4.261

4.511

5.013

5.639

7.018

1.960

2.085

2.211

2.336

2.461

2.712

2.963

3.213

3.464

3.715

3.965

4.216

4.466

4.968

5.594

6.973

2.160

2.290

2.410

2.540

2.660

2.910

3.160

3.410

3.660

3.920

4.160

4.410

4.660

-

-

-

MPB

MPB

MPB

JA

JA

JA

JA

JA

SH

SH

SH

SDS

SDS

SDS

SDS

SDS

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

0.000

0.000

0.000

1.344

1.344

1.344

2.344

2.625

2.750

2.906

3.125

3.250

3.750

4.250

4.875

6.031

1.531

1.688

1.813

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

1.063

1.063

1.063

1.063

1.063

1.063

1.063

1.063

1.063

1.063

1.063

1.063

1.063

-

-

-

-

-

-

0.563

0.563

0.563

0.563

0.563

0.813

0.813

0.813

0.750

0.750

0.750

0.750

0.750

0.438

0.438

0.438

0.719

0.719

0.719

0.219

0.219

0.188

0.188

0.188

0.156

0.156

0.156

0.156

0.156

1.281

1.281

1.281

1.281

1.281

1.281

1.281

1.281

1.281

1.281

1.281

1.281

1.281

1.281

1.281

1.281

-

-

-

0.000

0.000

0.000

0.719

0.719

0.469

0.469

0.469

0.531

0.531

0.531

0.531

0.531

1.719

1.719

1.719

1.000

1.000

1.000

1.000

1.000

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

0.000

0.000

0.000

0.500

0.500

0.500

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

1.10

1.20

1.40

0.90

1.00

1.30

1.10

1.30

1.70

2.10

2.40

2.60

2.80

3.60

4.70

7.70

OLD PART NUMBER

ON . OFT EE TH

Y ET PP.D.

BORES

WEIGHT

DIAMETERS

MAX.


BUSHINGSTOCK

DIMENSIONS

A C W D E F K L M

7/8

1

1 1/8

1 1/4

1 1/4

1 1/4

1 1/4

1 1/4

1 11/16

1 11/16

1 11/16

2

2

2

2

2


5mm PITCH (HTD) 9mm & 15mm WIDE BELTS


G-48

P.D.

F

L

E

M

K

O.D. C

TYPE - C

D

A

P.D.

C

TYPE - BF

W

D

A

P.D.

P.D.

F

L

E

M

K

O.D. C

TYPE - CF

D

W

A

F.D.

P.D.L

EM

K

C

F

O.D.

TYPE - DF

A

D

W

F.D.

P.D.

F

M

K

LECO.D.

TYPE - EF

A

W

D

F.D.

STEEL


ON . OFT ETE H

TYPEP.D.

BORESDIAMETERS

MAX.


SBU HINGSTOCK

WEIGHTE M

FACEWIDTH

DIMENSIONS

22-8M-20-TL-1108

24-8M-20-TL-1108

26-8M-20-TL-1108

28-8M-20-TL-1108

30-8M-20-TL-1108

32-8M-20-TL-1210

34-8M-20-TL-1610

36-8M-20-TL-1610

38-8M-20-TL-1610

40-8M-20-TL-1610

44-8M-20-TL-2012

48-8M-20-TL-2012

56-8M-20-TL-2012

64-8M-20-TL-2012

72-8M-20-TL-2012

80-8M-20-TL-2517

90-8M-20-TL-2517

22

24

26

28

30

32

34

36

38

40

44

48

56

64

72

80

90

1108

1108

1108

1108

1108

1210

1610

1610

1610

1610

2012

2012

2012

2012

2012

2517

2517

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

B1F

B1F

B1F

B1F

B1F

B1F

C2

2.206

2.406

2.607

2.807

3.008

3.208

3.409

3.609

3.810

4.010

4.411

4.812

5.614

6.416

7.218

8.020

9.023

2.152

2.352

2.553

2.753

2.954

3.154

3.355

3.555

3.756

3.956

4.357

4.758

5.560

6.362

7.164

7.966

8.969

2.559

2.756

2.953

3.150

3.346

3.543

3.819

3.937

4.134

4.331

4.764

5.157

5.945

6.772

7.598

8.386

-

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1 1/8

1 1/8

1 1/8

1 1/8

1 1/4

1 1/4

1 11/16

1 11/16

1 11/16

1 11/16

2 1/8

2 1/8

2 1/8

2 1/8

2 1/8

2 11/16

2 11/16

1.130

1.130

1.130

1.130

1.130

1.130

1.130

1.130

1.130

1.130

1.130

1.130

1.130

1.130

1.130

1.130

1.130

0.00

0.00

0.00

0.26

0.13

0.00

0.13

0.13

0.13

0.13

0.00

0.00

0.00

0.00

0.00

0.00

0.31

0.26

0.26

0.26

0.00

0.00

0.13

0.00

0.00

0.00

0.00

0.12

0.12

0.12

0.12

0.12

0.62

0.31

0.50

0.70

0.90

1.20

1.20

1.40

1.40

1.70

2.00

2.40

2.70

3.70

5.60

7.70

10.00

13.00

12.00

TL 8mm PITCH (HTD) 20mm & 30mm WIDE BELTS

TL 8mm PITCH (HTD) 20mm WIDE BELTS

ON . OFT ETE H

TYPEP.D.

BORESDIAMETERS

MAX.


SBU HINGSTOCK

WEIGHTE M

FACEWIDTH

DIMENSIONS

22-8M-30-TL-1108

24-8M-30-TL-1108

26-8M-30-TL-1108

28-8M-30-TL-1108

30-8M-30-TL-1210

32-8M-30-TL-1210

34-8M-30-TL-1610

36-8M-30-TL-1610

38-8M-30-TL-1610

40-8M-30-TL-2012

44-8M-30-TL-2012

48-8M-30-TL-2012

56-8M-30-TL-2012

64-8M-30-TL-2517

72-8M-30-TL-2517

80-8M-30-TL-2517

90-8M-30-TL-2517

112--8M-30-TL-2517

144--8M-30-TL-2517

22

24

26

28

30

32

34

36

38

40

44

48

56

64

72

80

90

112

144

1108

1108

1108

1108

1210

1210

1610

1610

1610

2012

2012

2012

2012

2517

2517

2517

2517

2517

2517

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

B1F

B1F

B1F

C2

C2

D3

2.206

2.406

2.607

2.807

3.008

3.208

3.409

3.609

3.810

4.010

4.411

4.812

5.614

6.416

7.218

8.020

9.023

11.229

14.437

2.152

2.352

2.553

2.753

2.954

3.154

3.355

3.555

3.756

3.956

4.357

4.758

5.560

6.362

7.164

7.966

8.969

11.175

14.383

2.559

2.756

2.953

3.150

3.346

3.543

3.819

3.937

4.134

4.331

4.764

5.157

5.945

6.772

7.598

8.386

-

-

-

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1 1/8

1 1/8

1 1/8

1 1/8

1 1/4

1 1/4

1 11/16

1 11/16

1 11/16

2 1/8

2 1/8

2 1/8

2 1/8

2 11/16

2 11/16

2 11/16

2 11/16

2 11/16

2 11/16

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.13

0.13

0.38

0.63

0.63

0.63

0.63

0.50

0.50

0.50

0.50

0.50

0.25

0.25

0.25

0.25

0.25

0.25

0.25

0.13

0.13

0.13

0.64

0.90

1.10

1.50

1.50

1.70

1.80

2.20

2.50

2.30

3.20

4.20

6.30

9.50

13.00

16.00

22.00

24.00

31.00


G-49


TYPE - D

H

E

W

M

O.D.

P.D.

TYPE - C

W

E M

HO.D.

P.D.

TYPE - BF

P.D.F.D.

O.D.

E LW

H

M

TYPE - AF

P.D.F.D.

O.D.

E L MW

STEEL


ON . OFT ETE H

TYPEP.D.

BORESDIAMETERS

MAX.


SBU HINGSTOCK

WEIGHTE M

FACEWIDTH

DIMENSIONS

28-8M-50-PB-1/2

30-8M-50-TL-1210

32-8M-50-TL-1210

34-8M-50-TL-1610

36-8M-50-TL-1610

38-8M-50-TL-1610

40-8M-50-TL-2012

44-8M-50-TL-2012

48-8M-50-TL-2012

56-8M-50-TL-2517

64-8M-50-TL-2517

72-8M-50-TL-2517

80-8M-50-TL-2517

90-8M-50-TL-2517

112-8M-50-TL-2517

144-8M-50-TL-2517

192-8M-50-TL-2517

28

30

32

34

36

38

40

44

48

56

64

72

80

90

112

144

192

1108

1210

1210

1610

1610

1610

2012

2012

2012

2517

2517

2517

2517

2517

2517

2517

2517

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1

A2

A3

A3

2.807

3.008

3.208

3.409

3.609

3.810

4.010

4.411

4.812

5.614

6.416

7.218

8.020

9.023

11.229

14.437

19.249

2.753

2.954

3.154

3.355

3.555

3.756

3.956

4.357

4.758

5.560

6.362

7.164

7.966

8.969

11.175

14.383

19.195

3.150

3.346

3.543

3.819

3.937

4.134

4.331

4.764

5.157

5.945

6.772

7.598

8.386

-

-

-

-

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

7/8

7/8

7/8

7/8

1 1/8

1 1/4

1 1/4

1 11/16

1 11/16

1 11/16

2 1/8

2 1/8

2 1/8

2 11/16

2 11/16

2 11/16

2 11/16

3 1/4

3 1/4

3 1/4

3 1/4

2.380

2.380

2.380

2.380

2.380

2.380

2.380

2.380

2.380

2.380

2.380

2.380

2.380

2.380

2.380

2.380

2.380

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

1.50

1.38

1.38

1.38

1.38

1.38

1.13

1.13

1.13

0.63

0.63

0.63

0.63

0.38

0.38

0.38

0.38

2.10

2.20

2.30

4.00

2.70

3.10

3.50

4.30

5.50

8.10

12.00

16.00

20.00

27.00

30.00

49.00

108.00

P.D.O.D. B

E MW

TYPE - A

P.D.F.D.

O.D. B

E L MW

TYPE - AF

TL 8mm PITCH (HTD) 50mm & 85mm WIDE BELTS


ON . OFT ETE H

TYPEP.D.

BORESDIAMETERS

MAX.


SBU HINGSTOCK

WEIGHTE M

FACEWIDTH

DIMENSIONS

34-8M-85-TL-1615

36-8M-85-TL-1615

38-8M-85-TL-1610

40-8M-85-TL-2012

44-8M-85-TL-2012

48-8M-85-TL-2012

56-8M-85-TL-2517

64-8M-85-TL-2517

72-8M-85-TL-3020

80-8M-85-TL-3020

90-8M-85-TL-3020

112-8M-85-TL-3020

144-8M-85-TL-3535

192-8M-85-TL-3535

34

36

38

40

44

48

56

64

72

80

90

112

144

192

1615

1615

1610

2012

2012

2012

2517

2517

3020

3020

3020

3020

3535

3535

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1

A2

A3

A3

3.409

3.609

3.810

4.010

4.411

4.812

5.614

6.416

7.218

8.020

9.023

11.229

14.437

19.249

3.355

3.555

3.756

3.956

4.357

4.758

5.560

6.362

7.164

7.966

8.969

11.175

14.383

19.195

3.810

4.009

-

4.410

4.764

5.212

6.014

6.716

7.500

8.420

-

-

-

-

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

7/8

7/8

7/8

7/8

1 3/16

1 3/16

1 11/16

1 11/16

1 11/16

2 1/8

2 1/8

2 1/8

2 11/16

2 11/16

3 1/4

3 1/4

3 1/4

3 1/4

3 15/16

3 15/16

3.750

3.750

3.750

3.750

3.750

3.750

3.750

3.750

3.750

3.750

3.750

3.750

3.750

3.750

0.75

0.75

-

1.25

1.25

1.25

0.81

0.59

0.88

0.50

0.50

0.50

0.00

0.13

1.50

1.50

-

1.25

1.25

1.25

1.19

1.41

0.88

1.25

1.25

1.25

0.25

0.13

3.90

4.40

4.56

4.70

5.90

7.60

11.00

15.00

18.00

22.00

32.00

33.00

54.00

125.00


G-50


STEEL



22-8M20-6FS6

QD24-8M-20-JA

QD26-8M-20-JA

QD28-8M-20-H

QD30-8M-20-H

QD32-8M-20-H

QD34-8M-20-SH

QD36-8M-20-SH

QD38-8M-20-SH

QD40-8M-20-SH

QD44-8M-20-SDS

QD48-8M-20-SDS

QD56-8M-20-SDS

QD64-8M-20-SDS

QD72-8M-20-SDS

QD80-8M-20-SDS

QD90-8M-20-SDS

22-8M-20-PB-1/2

24-8M-20-QD-JA

26-8M-20-QD-JA

28-8M-20-QD-H

30-8M-20-QD-H

32-8M-20-QD-H

34-8M-20-QD-SH

36-8M-20-QD-SH

38-8M-20-QD-SH

40-8M-20-QD-SH

44-8M-20-QD-SDS

48-8M-20-QD-SDS

56-8M-20-QD-SDS

64-8M-20-QD-SDS

72-8M-20-QD-SDS

80-8M-20-QD-SDS

90-8M-20-QD-SDS

22

24

26

28

30

32

34

36

38

40

44

48

56

64

72

80

90

MPB

JA

JA

H

H

H

SH

SH

SH

SH

SDS

SDS

SDS

SDS

SDS

SDS

SDS

D1F

E1F

E1F

E1F

E1F

C1F

D1F

D1F

D1F

D1F

C1F

C1F

C1F

C1F

C2F

C2F

C3

2.206

2.406

2.607

2.807

3.008

3.208

3.409

3.609

3.810

4.010

4.411

4.812

5.614

6.416

7.218

8.020

9.023

2.152

2.352

2.553

2.769

2.958

3.156

3.355

3.555

3.756

3.956

4.357

4.758

5.560

6.362

7.164

7.966

8.969

2.559

2.756

2.953

3.150

3.346

3.543

3.819

3.937

4.134

4.331

4.764

5.157

5.945

6.772

7.598

8.386

-

1/2

1/2

1/2

3/8

3/8

3/8

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

-

1.344

1.344

1.563

1.563

1.563

2.781

2.813

3.000

3.000

3.500

3.438

4.594

5.406

6.203

6.906

7.906

1.625

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

4.750

0.906

0.906

0.906

0.906

0.906

0.906

0.906

0.906

0.906

0.906

0.906

0.906

0.906

0.906

0.906

0.906

-

-

0.563

0.563

0.875

0.875

0.875

0.813

0.813

0.813

0.813

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.625

0.563

0.563

0.250

0.250

0.250

0.344

0.344

0.344

0.344

0.313

0.313

0.313

0.313

0.313

0.313

0.313

1.125

1.125

1.125

1.125

1.125

1.125

1.125

1.125

1.125

1.125

1.125

1.125

1.125

1.125

1.125

1.125

1.125

-

-

-

-

-

-

0.313

0.313

0.313

0.313

0.375

0.375

0.375

0.375

0.375

0.375

0.375

1.750

1.000

1.000

1.250

1.250

1.250

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.313

-

0.500

0.500

0.563

0.563

0.563

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

1.20

0.80

1.00

1.10

1.30

1.60

1.40

1.70

2.00

2.30

2.60

3.40

4.60

6.10

7.90

9.90

10.60

OLD PART NUMBER

ON . OFT EE TH

Y ET PP.D.

BORES

WEIGHT

DIAMETERS

MAX.


BUSHINGSTOCK

DIMENSIONS

A C W D E F K L M

1 3/16

1 1/4

1 1/4

1 1/2

1 1/2

1 1/2

11/16

11/16

11/16

11/16

2

2

2

2

2

2

2

22-8M30-6FS6

24-8M30-6FS6

26-8M30-6FS6

QD28-8M-30-H

QD30-8M-30-H

QD32-8M-30-H

QD34-8M-30-SH

QD36-8M-30-SH

QD38-8M-30-SH

QD40-8M-30-SH

QD44-8M-30-SDS

QD48-8M-30-SDS

QD56-8M-30-SDS

QD64-8M-30-SK

QD72-8M-30-SK

QD80-8M-30-SK

QD90-8M-30-SK

QD112-8M-30-SK

22-8M-30-PB-1/2

24-8M-30-PB-1/2

26-8M-30-PB-1/2

28-8M-30-QD-H

30-8M-30-QD-H

32-8M-30-QD-SH

34-8M-30-QD-SH

36-8M-30-QD-SH

38-8M-30-QD-SH

40-8M-30-QD-SDS

44-8M-30-QD-SDS

48-8M-30-QD-SDS

56-8M-30-QD-SK

64-8M-30-QD-SK

72-8M-30-QD-SK

80-8M-30-QD-SK

90-8M-30-QD-SK

112-8M-30-QD-SK

22

24

26

28

30

32

34

36

38

40

44

48

56

64

72

80

90

112

D1F

D1F

D1F

E1F

E1F

B1F

A1F

A1F

A1F

A1F

B1F

B1F

B1F

C1F

C2F

C2F

C2

C2

2.206

2.406

2.607

2.807

3.008

3.208

3.409

3.609

3.810

4.010

4.411

4.812

5.614

6.416

7.218

8.020

9.023

11.229

2.152

2.352

2.553

2.769

2.958

3.156

3.355

3.555

3.756

3.956

4.357

4.758

5.560

6.362

7.164

7.966

8.969

11.175

2.559

2.756

2.953

3.150

3.346

3.543

3.819

3.937

4.134

4.331

4.764

5.157

5.945

6.772

7.598

8.386

-

-

MPB

MPB

MPB

H

H

H

SH

SH

SH

SH

SDS

SDS

SDS

SK

SK

SK

SK

SK

1/2

1/2

1/2

3/8

3/8

3/8

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

-

-

-

1.563

1.563

1.563

2.813

2.813

3.000

3.000

3.500

3.813

4.594

5.406

6.219

6.906

7.906

10.000

1.625

1.813

2.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

4.750

4.750

4.750

1.219

1.219

1.219

1.219

1.219

1.219

1.219

1.219

1.219

1.219

1.219

1.219

1.219

1.219

1.219

1.219

-

-

-

-

-

0.875

0.875

0.875

0.813

0.813

0.813

0.813

0.750

0.750

0.750

1.250

1.250

1.250

1.250

1.250

0.625

0.625

0.750

0.625

0.625

0.625

0.031

0.031

0.031

0.031

0.063

0.063

0.063

0.625

0.625

0.625

0.625

0.625

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

-

-

-

-

-

-

0.688

0.688

0.688

0.688

0.750

0.750

0.750

0.250

0.250

0.250

0.250

0.250

2.250

2.250

2.250

1.250

1.250

1.250

1.313

1.313

1.313

1.313

1.313

1.313

1.313

1.938

1.938

1.938

1.938

1.938

-

-

-

0.563

0.563

0.563

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

1.50

1.90

2.40

1.40

1.80

2.10

1.60

2.00

2.30

2.80

3.00

3.80

5.20

8.60

11.40

11.00

12.90

18.80

OLD PART NUMBER

ON . OFT EE TH

Y ET PP.D.

BORES

WEIGHT

DIAMETERS

MAX.


BUSHINGSTOCK

DIMENSIONS

A C W D E F K L M

1 3/16

1 1/4

1 1/4

1 1/2

1 1/2

1 1/2

11/16

11/16

11/16

11/16

2

2

2

2 5/8

2 5/8

2 5/8

2 5/8

2 5/8




G-51

P.D.

L

E

M

K

C

F

O.D.

TYPE - AF

D

A

W

F.D.P.D.

F

L

E

M

K

O.D. C

TYPE - C

D

A

P.D.

C

TYPE - BF

W

D

A

P.D.

P.D.

F

L

E

M

K

O.D. C

TYPE - CF

D

W

A

F.D.

P.D.L

EM

K

C

F

O.D.

TYPE - DF

A

D

W

F.D.

P.D.

F

M

K

LECO.D.

TYPE - EF

A

W

D

F.D.

STEEL



QD28-8M-50-JA

QD30-8M-50-JA

QD32-8M-50-H

QD34-8M-50-SH

QD36-8M-50-SH

QD38-8M-50-SH

QD40-8M-50-SH

QD44-8M-50-SD

QD48-8M-50-SD

QD56-8M-50-SK

QD64-8M-50-SH

QD72-8M-50-SK

QD80-8M-50-SF

QD90-8M-50-SF

QD112-8M-50-SF

QD144-8M-50-E

QD192-8M-50-E

28-8M-50-QD-JA

30-8M-50-QD-H

32-8M-50-QD-SH

34-8M-50-QD-SH

36-8M-50-QD-SH

38-8M-50-QD-SH

40-8M-50-QD-SD

44-8M-50-QD-SD

48-8M-50-QD-SK

56-8M-50-QD-SK

64-8M-50-QD-SK

72-8M-50-QD-SF

80-8M-50-QD-SF

90-8M-50-QD--SF

112-8M-50-QD-SF

144-8M-50-QD-E

192-8M-50-QD-E

28

30

32

34

36

38

40

44

48

56

64

72

80

90

112

144

192

D1F

D1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

D1F

D1F

D1F

D2F

D2

D3

D3

D3

2.807

3.008

3.208

3.409

3.609

3.810

4.010

4.411

4.812

5.614

6.416

7.218

8.020

9.023

11.229

14.437

19.249

2.759

2.958

3.156

3.355

3.555

3.756

3.956

4.357

4.758

5.560

6.362

7.164

7.966

8.969

11.175

14.383

19.195

3.150

3.346

3.543

3.819

3.937

4.134

4.331

4.764

5.157

5.945

6.772

7.598

8.386

-

-

-

-

JA

JA

H

SH

SH

SH

SH

SD

SD

SK

SK

SK

SF

SF

SF

E

E

1/2

1/2

3/8

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

7/8

7/8

2.094

2.250

2.563

2.750

2.813

3.000

3.000

3.500

3.813

4.594

5.406

6.219

6.906

7.906

10.000

13.188

18.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

6.375

7.500

7.500

2.109

2.109

2.109

2.109

2.109

2.109

2.109

2.109

2.109

2.109

2.109

2.109

2.109

-

-

-

-

0.563

0.563

0.875

0.813

0.813

0.813

0.813

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.625

1.625

0.313

0.313

0.047

0.156

0.156

0.156

0.156

0.125

0.125

0.313

0.313

0.313

0.375

0.375

0.188

0.188

0.188

2.375

2.375

2.375

2.375

2.375

2.375

2.375

2.375

2.375

2.375

2.375

2.375

2.375

2.375

2.375

2.375

2.375

0.813

0.813

0.625

0.500

0.500

0.500

0.500

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.750

0.750

0.750

1.000

1.000

1.250

1.313

1.313

1.313

1.313

1.813

1.813

1.938

1.938

1.938

2.063

2.063

2.063

2.750

2.750

1.000

1.000

0.875

1.063

1.063

1.063

1.063

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.375

0.375

0.375

1.70

1.90

2.10

2.20

2.80

3.10

3.90

4.90

6.10

7.70

10.50

13.60

16.80

21.60

26.70

35.50

63.40

OLD PART NUMBER

ON . OFT EE TH

Y ET PP.D.

BORES

WEIGHT

DIAMETERS

MAX.


BUSHINGSTOCK

DIMENSIONS

A C W D E F K L M

1 1/4

1 1/4

1 1/2

11/16

11/16

11/16

11/16

2

2

2 5/8

2 5/8

2 5/8

2 15/16

2 15/16

2 15/16

3 1/2

3 1/2

QD34-8M-85-SH

QD36-8M-85-SH

QD38-8M-85-SH

QD40-8M-85-SD

QD44-8M-85-SD

QD48-8M-85-SD

QD56-8M-85-SK

QD64-8M-85-SK

QD72-8M-85-SF

QD80-8M-85-SF

QD90-8M-85-SF

QD112-8M-85-SF

QD144-8M-85-E

QD192-8M-85-E

34-8M-85-QD-SH

36-8M-85-QD-SH

38-8M-85-QD-SD

40-8M-85-QD-SD

44-8M-85-QD-SD

48-8M-85-QD-SK

56-8M-85-QD-SK

64-8M-85-QD-SF

72-8M-85-QD-SF

80-8M-85-QD-SF

90-8M-85-QD-SF

112-8M-85-QD-SF

144-8M-85-QD-E

192-8M-85-QD-E

34

36

38

40

44

48

56

64

72

80

90

112

144

192

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A2F

A2

A3

A3

A3

3.409

3.609

3.810

4.010

4.411

4.812

5.614

6.416

7.218

8.020

9.023

11.229

14.437

19.249

3.355

3.555

3.756

3.956

4.357

4.758

5.560

6.362

7.164

7.966

8.969

11.175

14.383

19.195

3.819

3.937

4.134

4.331

4.764

5.157

5.945

6.772

7.598

8.386

-

-

-

-

SH

SH

SH

SD

SD

SD

SK

SK

SF

SF

SF

SF

E

E

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

7/8

7/8

2.750

2.813

3.000

3.250

3.500

3.813

4.594

5.406

6.219

6.906

7.906

10.000

13.219

18.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

6.375

7.500

7.500

3.469

3.469

3.469

3.469

3.469

3.469

3.469

3.469

3.469

3.469

-

-

-

-

0.813

0.813

0.813

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.625

1.625

0.844

0.844

0.844

0.563

0.563

0.563

0.375

0.375

0.313

0.313

0.313

0.313

0.125

0.125

3.750

3.750

3.750

3.750

3.750

3.750

3.750

3.750

3.750

3.750

3.750

3.750

3.750

3.750

1.500

1.500

1.500

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.063

1.063

1.313

1.313

1.313

1.813

1.813

1.813

1.938

1.938

2.063

2.063

2.063

2.063

2.750

2.750

1.438

1.438

1.438

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.063

1.063

3.10

3.90

4.40

4.90

6.60

8.20

10.20

13.40

16.40

20.90

26.20

31.70

43.90

75.00

OLD PART NUMBER

ON . OFT EE TH

Y ET PP.D.

BORES

WEIGHT

DIAMETERS

MAX.


BUSHINGSTOCK

DIMENSIONS

A C W D E F K L M

11/16

11/16

11/16

2

2

2

2 5/8

2 5/8

2 15/16

2 15/16

2 15/16

2 15/16

3 1/2

3 1/2




G-52

P.D.L

EM

K

C

F

O.D.

TYPE - D

A

D

P.D.

L

E

M

K

C

F

O.D.

TYPE - AF

D

A

W

F.D.

P.D.L

EM

K

C

F

O.D.

TYPE - DF

A

D

W

F.D.

P.D.

L

E

M

K

C

F

O.D.

TYPE - A

D

A

STEEL


ON . OFT ETE H

TYPEP.D.

BORESDIAMETERS

MAX.


SBU HINGSTOCK

WEIGHTE M

FACEWIDTH

DIMENSIONS

28-14M-40-TL-2012

29-14M-40-TL-2012

30-14M-40-TL-2012

32-14M-40-TL-2012

34-14M-40-TL-2012

36-14M-40-TL-2517

38-14M-40-TL-2517

40-14M-40-TL-2517

44-14M-40-TL-2517

48-14M-40-TL-2517

52-14M-40-TL-2517

56-14M-40-TL-2517

60-14M-40-TL-3020

64-14M-40-TL-3020

68-14M-40-TL-3020

72-14M-40-TL-3020

80-14M-40-TL-3020

90-14M-40-TL-3020

112-14M-40-TL-3020

144-14M-40-TL-3020

168--14M-40-TL-3020

192-14M-40-TL-3020

28

29

30

32

34

36

38

40

44

48

52

56

60

64

68

72

80

90

112

144

168

192

2012

2012

2012

2012

2012

2517

2517

2517

2517

2517

2517

2517

3020

3020

3020

3020

3020

3020

3020

3020

3020

3020

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A2F

A2F

A2F

A2F

A3F

A3

A3

A3

A3

A3

4.912

5.088

5.263

5.614

5.965

6.316

6.667

7.018

7.720

8.421

9.123

9.825

10.527

11.229

11.930

12.632

14.036

15.790

19.650

25.264

29.475

33.686

4.802

4.978

5.153

5.504

5.855

6.206

6.557

6.908

7.610

8.311

9.013

9.715

10.417

11.119

11.820

12.522

13.926

15.680

19.540

25.154

29.265

33.576

5.560

5.560

6.125

6.125

6.500

6.875

7.219

7.500

8.343

8.937

9.687

10.375

11.062

11.750

12.500

13.187

14.625

-

-

-

-

-

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

7/8

7/8

7/8

7/8

7/8

7/8

7/8

7/8

7/8

7/8

2 1/8

2 1/8

2 1/8

2 1/8

2 1/8

2 11/16

2 11/16

2 11/16

2 11/16

2 11/16

2 11/16

2 11/16

3 1/4

3 1/4

3 1/4

3 1/4

3 1/4

3 1/4

3 1/4

3 1/4

3 1/4

3 1/4

2.130

2.130

2.130

2.130

2.130

2.130

2.130

2.130

2.130

2.130

2.130

2.130

2.130

2.130

2.130

2.130

2.130

2.130

2.130

2.130

2.130

2.130

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.88

0.88

0.88

0.88

0.88

0.38

0.38

0.38

0.38

0.38

0.38

0.38

0.13

0.13

0.13

0.13

0.13

0.13

0.13

0.13

0.13

0.13

5.90

6.60

6.50

8.00

9.40

11.00

12.00

14.00

18.00

22.00

26.00

31.00

29.00

31.00

31.00

34.00

34.00

40.00

101.00

154.00

133.00

168.00

P.D.O.D. B

E MW

TYPE - A

P.D.F.D.

O.D. B

E L MW

TYPE - AF



G-53


STEEL


ON . OFT ETE H

TYPEP.D.

BORESDIAMETERS

MAX.


SBU HINGSTOCK

WEIGHTE M

FACEWIDTH

DIMENSIONS

28-14M-55-TL-2012

29-14M-55-TL-2012

30-14M-55-TL-2517

32-14M-55-TL-2517

34-14M-55-TL-2517

36-14M-55-TL-2517

38-14M-55-TL-2517

40-14M-55-TL-2517

44-14M-55-TL-2517

48-14M-55-TL-3020

52-14M-55-TL-3020

56-14M-55-TL-3020

60-14M-55-TL-3020

64-14M-55-TL-3020

68-14M-55-TL-3020

72-14M-55-TL-3020

80-14M-55-TL-3020

90-14M-55-TL-3020

112-14M-55-TL-3020

144-14M-55-TL-3020

168-14M-55-TL-3020

192-14M-55-TL-3020

28

29

30

32

34

36

38

40

44

48

52

56

60

64

68

72

80

90

112

144

168

192

2012

2012

2517

2517

2517

2517

2517

2517

2517

3020

3020

3020

3020

3020

3020

3020

3020

3020

3020

3020

3020

3020

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A2F

A2F

A3F

A3

A3

A3

A3

C3

4.912

5.088

5.263

5.614

5.965

6.316

6.667

7.018

7.720

8.421

9.123

9.825

10.527

11.229

11.930

12.632

14.036

15.790

19.650

25.264

29.475

33.686

4.802

4.978

5.153

5.504

5.855

6.206

6.557

6.908

7.610

8.311

9.013

9.715

10.417

11.119

11.820

12.522

13.926

15.680

19.540

25.154

29.265

33.576

5.560

5.560

6.125

6.125

6.500

6.875

7.219

7.500

8.343

8.937

9.687

10.375

11.062

11.750

12.500

13.187

14.625

-

-

-

-

-

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

7/8

7/8

7/8

7/8

7/8

7/8

7/8

7/8

7/8

7/8

7/8

7/8

1 3/16

2 1/8

2 1/8

2 11/16

2 11/16

2 11/16

2 11/16

2 11/16

2 11/16

2 11/16

3 1/4

3 1/4

3 1/4

3 1/4

3 1/4

3 1/4

3 1/4

3 1/4

3 1/4

3 1/4

3 1/4

3 1/4

1 15/16

2.750

2.750

2.750

2.750

2.750

2.750

2.750

2.750

2.750

2.750

2.750

2.750

2.750

2.750

2.750

2.750

2.750

2.750

2.750

2.750

2.750

2.750

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

1.50

1.50

1.00

1.00

1.00

1.00

1.00

1.00

1.00

0.75

0.75

0.75

0.75

0.75

0.75

0.75

0.75

0.75

0.75

0.75

0.56

0.75

7.40

8.40

7.40

9.30

11.00

12.00

14.00

17.00

20.00

24.00

30.00

35.00

42.00

48.00

40.00

45.00

42.00

45.00

117.00

98.00

146.00

432.00

P.D.O.D. B

E MW

TYPE - A

P.D.F.D.

O.D. B

E L MW

TYPE - AF



G-54


TYPE - C

W

E M

HO.D.

P.D.

STEEL


ON . OFT ETE H

TYPEP.D.

BORESDIAMETERS

MAX.


SBU HINGSTOCK

WEIGHTE M

FACEWIDTH

DIMENSIONS

28-14M-85-TL-2012

29-14M-85-TL-2012

30-14M-85-TL-2517

32-14M-85-TL-2517

34-14M-85-TL-2517

36-14M-85-TL-3020

38-14M-85-TL-3020

40-14M-85-TL-3020

44-14M-85-TL-3020

48-14M-85-TL-3020

52-14M-85-TL-3535

56-14M-85-TL-3535

60-14M-85-TL-3535

64-14M-85-TL-3535

68-14M-85-TL-3535

72-14M-85-TL-3535

80-14M-85-TL-3535

90-14M-85-TL-3535

112-14M-85-TL-3535

144-14M-85-TL-4040

168-14M-85-TL-4040

192-14M-85-TL-4040

28

29

30

32

34

36

38

40

44

48

52

56

60

64

68

72

80

90

112

144

168

192

2012

2012

2517

2517

2517

3020

3020

3020

3020

3020

3535

3535

3535

3535

3535

3535

3535

3535

3535

4040

4040

4040

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A2F

A1F

A2F

A2

A3

A3

A3

A3

4.912

5.088

5.263

5.614

5.965

6.316

6.667

7.018

7.720

8.421

9.123

9.825

10.527

11.229

11.930

12.632

14.036

15.790

19.650

25.264

29.475

33.686

4.802

4.978

5.153

5.504

5.855

6.206

6.557

6.908

7.610

8.311

9.013

9.715

10.417

11.119

11.820

12.522

13.926

15.680

19.540

25.154

29.265

33.576

5.560

5.560

6.125

6.125

6.500

6.875

7.219

7.500

8.343

8.937

9.687

10.375

11.062

11.750

12.500

13.187

14.625

-

-

-

-

-

1/2

1/2

1/2

1/2

1/2

7/8

7/8

7/8

7/8

7/8

1 3/16

1 3/16

1 3/16

1 3/16

1 3/16

1 3/16

1 3/16

1 3/16

1 3/16

1 7/16

1 7/16

1 7/16

2 1/8

2 1/8

2 11/16

2 11/16

2 11/16

3 1/4

3 1/4

3 1/4

3 1/4

3 1/4

3 15/16

3 15/16

3 15/16

3 15/16

3 15/16

3 15/16

3 15/16

3 15/16

3 15/16

4 7/16

4 7/16

4 7/16

4.000

4.000

4.000

4.000

4.000

4.000

4.000

4.000

4.000

4.000

4.000

4.000

4.000

4.000

4.000

4.000

4.000

4.000

4.000

4.000

4.000

4.000

1.31

1.31

0.50

0.81

0.81

0.53

0.53

0.53

0.53

0.53

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

1.44

1.44

1.75

1.44

1.44

1.47

1.47

1.47

1.47

1.47

0.50

0.50

0.50

0.50

0.50

0.50

0.50

0.50

0.50

0.00

0.00

0.00

10.00

12.00

10.00

13.00

15.00

14.00

17.00

20.00

24.00

31.00

37.00

52.00

63.00

74.00

63.00

97.00

63.00

72.00

131.00

137.00

192.00

448.00

P.D.O.D. B

E MW

TYPE - A

P.D.F.D.

O.D. B

E L MW

TYPE - AF



G-55


P.D.O.D. B

E MW

TYPE - A

P.D.F.D.

O.D. B

E L MW

TYPE - AF

STEEL


ON . OFT ETE H

TYPEP.D.

BORESDIAMETERS

MAX.


SBU HINGSTOCK

WEIGHTE M

FACEWIDTH

DIMENSIONS

30-14M-115-TL-2517

32-14M-115-TL-2517

34-14M-115-TL-2517

36-14M-115-TL-3020

38-14M-115-TL-3020

40-14M-115-TL-3020

44-14M-115-TL-3535

48-14M-115-TL-3535

52-14M-115-TL-4040

56-14M-115-TL-4040

60-14M-115-TL-4040

64-14M-115-TL-4545

68-14M-115-TL-4545

72-14M-115-TL-4545

80-14M-115-TL-4545

90-14M-115-TL-4545

112-14M-115-TL-4545

144-14M-115-TL-4545

168-14M-115-TL-4545

192-14M-115-TL-4545

216-14M-115-TL-4545

30

32

34

36

38

40

44

48

52

56

60

64

68

72

80

90

112

144

168

192

216

2517

2517

2517

3020

3020

3020

3535

3535

4040

4040

4040

4545

4545

4545

4545

4545

4545

4545

4545

4545

4545

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A2F

A2

A2

A3

A3

A3

A3

5.263

5.614

5.965

6.316

6.667

7.018

7.720

8.421

9.123

9.825

10.527

11.229

11.930

12.632

14.036

15.790

19.650

25.264

29.475

33.686

37.896

5.153

5.504

5.855

6.206

6.557

6.908

7.610

8.311

9.013

9.715

10.417

11.119

11.820

12.522

13.926

15.680

19.540

25.154

29.265

33.576

37.786

5.763

6.114

6.465

6.816

7.167

7.518

8.395

8.941

9.687

10.355

11.067

11.750

12.500

13.066

14.620

.

.

.

.

.

.

1/2

1/2

1/2

7/8

7/8

7/8

1 3/16

1 3/16

1 7/16

1 7/16

1 7/16

1 15/16

1 15/16

1 15/16

1 15/16

1 15/16

1 15/16

1 15/16

1 15/16

1 15/16

4 7/16

2 11/16

2 11/16

2 11/16

3 1/4

3 1/4

3 1/4

3 15/16

3 15/16

4 7/16

4 7/16

4 7/16

4 15/16

4 15/16

4 15/16

4 15/16

4 15/16

4 15/16

4 15/16

4 15/16

4 15/16

6

5.250

5.250

5.250

5.250

5.250

5.250

5.250

5.250

5.250

5.250

5.250

5.250

5.250

5.250

5.250

5.250

5.250

5.250

5.250

5.250

5.250

1.75

1.75

1.75

1.63

1.63

1.63

0.88

0.88

0.63

0.63

0.63

0.38

0.38

0.00

0.38

0.38

0.00

0.38

0.38

0.38

0.00

1.75

1.75

1.75

1.63

1.63

1.63

0.88

0.88

0.63

0.63

0.63

0.38

0.38

0.75

0.38

0.38

0.75

0.38

0.38

0.38

0.25

13.00

16.00

19.00

18.00

20.00

23.00

30.00

40.00

47.00

58.00

70.00

82.00

97.00

113.00

148.00

117.00

173.00

120.00

223.00

475.00

686.00



G-56


STEEL


ON . OFT ETE H

TYPEP.D.

BORESDIAMETERS

MAX.


SBU HINGSTOCK

WEIGHTE M

FACEWIDTH

DIMENSIONS

40-14M-170-TL-3535

44-14M-170-TL-3535

48-14M-170-TL-3535

52-14M-170-TL-4040

56-14M-170-TL-4040

60-14M-170-TL-4545

64-14M-170-TL-4545

68-14M-170-TL-4545

72-14M-170-TL-4545

80-14M-170-TL-4545

90-14M-170-TL-4545

112-14M-170-TL-4545

144-14M-170-TL-6050

168-14M-170-TL-6050

192-14M-170-TL-6050

216-14M-170-TL-6050

40

44

48

52

56

60

64

68

72

80

90

112

144

168

192

216

3020

3535

3535

4040

4040

4040

4545

4545

4545

4545

4545

4545

4545

4545

4545

4545

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A2

D2

A3

A3

A3

A2

7.018

7.720

8.421

9.123

9.825

10.527

11.229

11.930

12.632

14.036

15.790

19.650

25.264

29.475

33.686

37.896

6.908

7.610

8.311

9.013

9.715

10.417

11.119

11.820

12.522

13.926

15.680

19.540

25.154

29.265

33.576

37.786

7.518

8.395

8.941

9.687

10.355

11.067

11.750

12.500

13.066

14.625

-

-

-

-

-

-

1 3/16

1 3/16

1 3/16

1 7/16

1 7/16

1 15/16

1 15/16

1 15/16

1 15/16

1 15/16

1 15/16

1 15/16

4 7/16

4 7/16

4 7/16

4 7/16

3 15/16

3 15/16

3 15/16

4 7/16

4 7/16

4 15/16

4 15/16

4 15/16

4 15/16

4 15/16

4 15/16

4 15/16

6

6

6

6

5.250

5.250

5.250

5.250

5.250

5.250

5.250

5.250

5.250

5.250

5.250

5.250

5.250

5.250

5.250

5.250

1.94

1.94

1.94

1.13

1.13

0.75

0.63

0.63

0.63

1.03

0.63

0.25

1.19

1.19

1.19

1.19

1.94

1.94

1.94

2.25

2.25

2.13

2.25

2.25

2.25

1.84

2.25

3.12

1.19

1.19

1.19

1.19

29.00

39.00

51.00

59.00

71.00

83.00

94.00

113.00

130.00

166.00

159.00

215.00

264.00

462.00

616.00

563.00

P.D.O.D. B

E MW

TYPE - A

P.D.F.D.

O.D. B

E L MW

TYPE - AF



G-57


TYPE - D

H

E

W

M

O.D.

P.D.

STEEL



OLD PART NUMBER

ON . OFT EE TH

Y ET PP.D.

BORES

WEIGHT

DIAMETERS

MAX.


BUSHINGSTOCK

DIMENSIONS

A C W D E F K L M

QD28-14M-40-SK

QD29-14M-40-SK

QD30-14M-40-SK

QD32-14M-40-SK

QD34-14M-40-SK

QD36-14M-40-SF

QD38-14M-40-SF

QD40-14M-40-SF

QD44-14M-40-E

QD48-14M-40-E

QD52-14M-40-E

QD56-14M-40-E

QD60-14M-40-E

QD64-14M-40-E

QD68-14M-40-E

QD72-14M-40-E

QD80-14M-40-E

QD90-14M-40-E

QD112-14M-40-E

QD144-14M-40-E

28-14M-40-QD-SK

29-14M-40-QD-SK

30-14M-40-QD-SK

32-14M-40-QD-SK

34-14M-40-QD-SF

36-14M-40-QD-SF

38-14M-40-QD-SF

40-14M-40-QD-E

44-14M-40-QD-E

48-14M-40-QD--E

52-14M-40-QD-E

56-14M-40-QD-E

60-14M-40-QD-E

64-14M-40-QD-E

68-14M-40-QD-E

72-14M-40-QD-E

80-14M-40-QD-E

90-14M-40-QD--E

112-14M-40-QD-E

144-14M-40-QD-E

28

28

30

32

34

36

38

40

44

48

52

56

60

64

68

72

80

90

112

144

SK

SK

SK

SK

SK

SF

SF

SF

E

E

E

E

E

E

E

E

E

E

E

E

E1F

E1F

D1F

D1F

D1F

D1F

D1F

D1F

D1F

D1F

D1F

D1F

D2F

D2F

D2F

D2F

D2F

D3

D3

D3

4.912

5.088

5.263

5.614

5.965

6.316

6.667

7.018

7.720

8.412

9.123

9.825

10.527

11.229

11.930

12.632

14.036

15.790

19.650

25.264

4.808

4.983

5.157

5.507

5.858

6.208

6.559

6.909

7.610

8.311

9.013

9.715

10.717

11.119

11.820

12.522

13.926

15.680

19.540

25.154

5.402

5.402

5.763

6.114

6.465

6.816

7.167

7.518

8.395

8.914

9.687

10.355

11.067

11.593

12.500

13.006

14.620

-

-

-

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

7/8

7/8

7/8

7/8

7/8

7/8

7/8

7/8

7/8

7/8

7/8

7/8

2 5/8

2 5/8

2 5/8

2 5/8

2 5/8

2 15/16

2 15/16

2 15/16

3 1/2

3 1/2

3 1/2

3 1/2

3 1/2

3 1/2

3 1/2

3 1/2

3 1/2

3 1/2

3 1/2

3 1/2

3.125

3.125

3.906

3.906

4.063

4.688

4.938

5.063

6.125

6.500

7.188

7.875

8.500

9.250

10.000

10.688

12.125

14.500

18.375

23.875

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

7.500

7.500

7.500

7.500

7.500

7.500

1.813

1.813

1.813

1.813

1.813

1.813

1.813

1.813

1.813

1.813

1.813

1.813

1.813

1.813

1.813

1.813

1.813

-

-

-

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.625

1.625

1.625

1.625

1.625

1.625

1.625

1.625

1.625

1.625

1.625

1.625

0.875

0.875

0.438

0.438

0.438

0.500

0.500

0.500

1.063

0.750

0.938

0.938

0.750

0.750

0.750

0.875

0.750

0.938

0.938

0.938

2.125

2.125

2.125

2.125

2.125

2.125

2.125

2.125

2.125

2.125

2.125

2.125

2.125

2.125

2.125

2.125

2.125

2.125

2.125

2.125

-

-

0.438

0.438

0.438

0.438

0.438

0.438

0.125

0.438

0.250

0.250

0.438

0.438

0.438

0.313

0.438

0.250

0.250

0.250

1.938

1.938

1.938

1.938

1.938

2.063

2.063

2.063

2.750

2.750

2.750

2.750

2.750

2.750

2.750

2.750

2.750

2.750

2.750

2.750

0.875

0.875

0.438

0.438

0.438

0.438

0.438

0.438

0.375

0.063

0.250

0.250

0.063

0.063

0.063

0.188

0.063

0.250

0.250

0.250

5.20

5.70

5.60

7.20

8.60

9.00

10.60

12.50

14.00

18.40

23.60

27.30

29.00

32.60

36.00

39.80

51.50

39.60

52.50

80.00

OLD PART NUMBER

ON . OFT EE TH

Y ET PP.D.

BORES

WEIGHT

DIAMETERS

MAX.


BUSHINGSTOCK

DIMENSIONS

A C W D E F K L M

QD28-14M-55-SK

QD29-14M-55-SK

QD30-14M-55-SK

QD32-14M-55-SK

QD34-14M-55-SK

QD36-14M-55-SF

QD38-14M-55-SF

QD40-14M-55-SF

QD44-14M-55-E

QD48-14M-55-E

QD52-14M-55-E

QD56-14M-55-E

QD60-14M-55-E

QD64-14M-55-F

QD68-14M-55-F

QD72-14M-55-F

QD80-14M-55-F

QD90-14M-55-F

QD112-14M-55-F

QD144-14M-55-F

QD168-14M-55-F

QD192-14M-55-F

QD216-14M-55-F

28-14M-55-QD-SK

29-14M-55-QD-SK

30-14M-55-QD-SK

32-14M-55-QD-SK

34-14M-55-QD-SF

36-14M-55-QD-SF

38-14M-55-QD-SF

40-14M-55-QD-E

44-14M-55-QD-E

48-14M-55-QD-E

52-14M-55-QD-E

56-14M-55-QD-E

60-14M-55-QD-E

64-14M-55-QD-E

68-14M-55-QD-E

72-14M-55-QD-E

80-14M-55-QD-E

90-14M-55-QD-F

112-14M-55-QD-F

144-14M-55-QD-F

168-14M-55-QD-F

192-14M-55-QD-F

216-14M-55-QD-F

28

29

30

32

34

36

38

40

44

48

52

56

60

64

68

72

80

90

112

144

168

192

216

E1F

E1F

A1F

A1F

A1F

A1F

A1F

A1F

D1F

D1F

D1F

D1F

D1F

D2F

D2F

D2F

D3

D3

D3

D3

D3

D3

D3

4.912

5.088

5.263

5.614

5.965

6.316

6.667

7.018

7.720

8.412

9.123

9.825

10.527

11.229

11.930

12.632

14.036

15.790

19.650

25.264

29.475

33.686

37.896

4.808

4.983

5.157

5.507

5.858

6.208

6.559

6.909

7.610

8.311

9.013

9.715

10.417

11.119

11.820

12.522

13.926

15.680

19.540

25.154

29.365

33.576

37.786

5.402

5.402

5.763

6.114

6.465

6.816

7.167

7.518

8.395

8.914

9.687

10.355

11.067

11.593

12.500

13.006

14.620

-

-

-

-

-

-

SK

SK

SK

SK

SK

SF

SF

SF

E

E

E

E

E

F

F

F

F

F

F

F

F

F

F

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

7/8

7/8

7/8

7/8

7/8

1

1

1

1

1

1

1

1

1

1

2 5/8

2 5/8

2 5/8

2 5/8

2 5/8

2 15/16

2 15/16

2 15/16

3 1/2

3 1/2

3 1/2

3 1/2

3 1/2

4

4

4

4

4

4

4

4

4

4

3.125

3.125

3.906

3.906

4.063

4.688

4.938

5.063

6.125

6.500

7.156

7.875

8.500

9.250

10.000

10.688

12.125

14.500

18.375

23.875

28.250

32.375

36.625

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

7.750

7.750

7.750

7.750

7.750

7.750

2.438

2.438

2.438

2.438

2.438

2.438

2.438

2.438

2.438

2.438

2.438

2.438

2.438

2.438

2.438

2.438

2.438

-

-

-

-

-

-

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.625

1.625

1.625

1.625

1.625

2.500

2.500

2.500

2.500

2.500

2.500

2.500

2.500

2.500

2.500

1.500

1.500

0.125

0.125

0.125

0.188

0.188

0.188

0.625

0.625

0.625

0.625

0.625

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

1.250

2.750

2.750

2.750

2.750

2.750

2.750

2.750

2.750

2.750

2.750

2.750

2.750

2.750

2.750

2.750

2.750

2.750

2.750

2.750

2.750

2.750

2.750

2.750

-

-

0.750

0.750

0.750

0.750

0.750

0.750

0.563

0.563

0.563

0.563

0.563

0.125

0.125

0.125

0.125

0.125

0.125

0.125

0.125

0.125

0.125

1.938

1.938

1.938

1.938

1.938

2.063

2.063

2.063

2.750

2.750

2.750

2.750

2.750

3.750

3.750

3.750

3.750

3.750

3.750

3.750

3.750

3.750

3.750

0.875

0.875

0.750

0.750

0.750

0.750

0.750

0.750

0.563

0.563

0.563

0.563

0.563

0.125

0.125

0.125

0.125

0.125

0.125

0.125

0.125

0.125

0.125

6.50

8.00

6.70

8.50

10.30

10.90

12.20

14.90

16.50

21.80

26.50

31.40

37.00

50.70

45.00

48.20

56.00

56.50

74.00

98.00

130.00

155.00

210.00


14mm PITCH (L) 40mm WIDE BELTS


G-58

P.D.L

EM

K

C

F

O.D.

TYPE - D

A

D

P.D.L

EM

K

C

F

O.D.

TYPE - DF

A

D

W

F.D.

P.D.

L

E

M

K

C

F

O.D.

TYPE - AF

D

A

W

F.D.

P.D.

F

M

K

LECO.D.

TYPE - EF

A

W

D

F.D.

STEEL



OLD PART NUMBER

ON . OFT EE TH

Y ET PP.D.

BORES

WEIGHT

DIAMETERS

MAX.


BUSHINGSTOCK

DIMENSIONS

A C W D E F K L M

28-14M-85

29-14M-85

QD30-14M-85

QD32-14M-85

QD34-14M-85

QD36-14M-85

QD38-14M-85

QD40-14M-85

QD44-14M-85

QD48-14M-85

QD52-14M-85

QD56-14M-85

QD60-14M-85

QD64-14M-85

QD68-14M-85

QD72-14M-85

QD80-14M-85

QD90-14M-85

QD112-14M-85

QD144-14M-85

QD168-14M-85

QD192-14M-85

QD216-14M-85

28-14M-85-PB-1/14

29-14M-85-PB-1/14

30-14M-85-QD-SK

32-14M-85-QD-SK

34-14M-85-QD-SF

36-14M-85-QD-SF

38-14M-85-QD-SF

40-14M-85-QD-E

44-14M-85-QD-E

48-14M-85-QD-E

52-14M-85-QD-F

56-14M-85-QD-F

60-14M-85-QD-F

64-14M-85-QD-F

68-14M-85-QD-F

72-14M-85-QD-F

80-14M-85-QD-F

90-14M-85-QD-F

112-14M-85-QD-F

144-14M-85-QD-F

168-14M-85-QD-F

192-14M-85-QD-F

216-14M-85-QD-F

28

29

30

32

34

36

38

40

44

48

52

56

60

64

68

72

80

90

112

144

168

192

216

D1F

D1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

D1F

D1F

D1F

D1F

D1F

D1F

D3

D3

D3

D3

D3

D3

4.192

5.008

5.263

5.614

5.965

6.316

6.667

7.018

7.720

8.421

9.123

9.825

10.527

11.229

11.930

12.632

14.036

16.790

19.650

25.264

29.475

33.576

37.786

4.808

4.983

5.157

5.507

5.858

6.208

6.559

6.909

7.610

8.311

9.013

9.715

10.417

11.119

11.820

12.522

13.926

15.680

19.540

25.154

29.265

33.576

37.786

5.563

5.563

5.750

6.125

6.469

6.813

7.156

7.500

8.375

8.938

9.688

10.344

11.063

11.750

12.500

13.063

14.625

-

-

-

-

-

-

MPB

MPB

SK

SK

SK

SF

SF

SF

E

E

E

F

F

F

F

F

F

F

F

F

F

F

F

1 1/4

1 1/4

1/2

1/2

1/2

1/2

1/2

1/2

1/2

7/8

7/8

7/8

1

1

1

1

1

1

1

1

1

1

1

2 11/16

2 11/16

2 5/8

2 5/8

2 5/8

2 15/16

2 15/16

2 15/16

3 1/2

3 1/2

3 1/2

4

4

4

4

4

4

4

4

4

4

4

4

3.125

3.125

3.906

3.906

4.063

4.688

4.938

5.063

6.125

6.500

7.188

7.875

8.500

9.250

10.000

10.688

12.125

14.500

18.250

23.875

28.125

32.375

36.375

3.688

3.688

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

7.750

7.750

7.750

7.750

7.750

7.750

3.688

3.688

3.688

3.688

3.688

3.688

3.688

3.688

3.688

3.688

3.688

3.688

3.688

3.688

3.688

3.688

3.688

-

-

-

-

-

-

-

-

1.250

1.250

1.250

1.250

1.250

1.250

1.625

1.625

1.625

2.500

2.500

2.500

2.500

2.500

2.500

2.500

2.500

2.500

2.500

2.500

2.500

1.000

1.000

0.500

0.500

0.500

0.438

0.438

0.438

0.000

0.000

0.000

0.625

0.625

0.625

0.625

0.625

0.625

0.625

0.625

0.625

0.625

0.625

0.625

4.000

4.000

4.000

4.000

4.000

4.000

4.000

4.000

4.000

4.000

4.000

4.000

4.000

4.000

4.000

4.000

4.000

4.000

4.000

4.000

4.000

4.000

4.000

-

-

1.375

1.375

1.375

1.375

1.375

1.375

1.188

1.188

1.188

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

4.000

4.000

1.938

1.938

1.938

2.063

2.063

2.063

2.750

2.750

2.750

3.750

3.750

3.750

3.750

3.750

3.750

3.750

3.750

3.750

3.750

3.750

3.750

1.000

1.000

1.375

1.375

1.375

1.375

1.375

1.375

1.188

1.188

1.188

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

0.750

16.50

17.80

9.00

10.30

13.80

14.00

16.20

18.20

21.40

28.00

33.00

43.80

52.00

60.00

53.78

58.00

65.50

69.00

88.00

125.00

153.00

177.00

215.00

OLD PART NUMBER

ON . OFT EE TH

Y ET PP.D.

BORES

WEIGHT

DIAMETERS

MAX.


BUSHINGSTOCK

DIMENSIONS

A C W D E F K L M

28-14M-115

29-14M-115

QD30-14M-115SK

QD32-14M-115-SK

QD34-14M-115-SK

QD36-14M-115-SF

QD38-14M-115-SF

QD40-14M-115-SF

QD44-14M-115-E

QD48-14M-115-E

QD52-14M-115-F

QD56-14M-115-F

QD60-14M-115-F

QD64-14M-115-J

QD68-14M-115-J

QD72-14M-115-J

QD80-14M-115-J

QD90-14M-115-J

QD112-14M-115-J

QD144-14M-115-J

QD168-14M-115-J

QD192-14M-115-J

QD216-14M-115-J

28-14M-115-PB-1/14

29-14M-115-PB-1/14

30-14M-115-QD-SK

32-14M-115-QD-SK

34-14M-115-QD-SF

36-14M-115-QD-SF

38-14M-115-QD-SF

40-14M-115-QD-E

44-14M-115-QD-E

48-14M-115-QD-F

52-14M-115-QD-F

56-14M-115-QD-F

60-14M-115-QD-E

64-14M-115-QD-J

68-14M-115-QD-J

72-14M-115-QD-J

80-14M-115-QD-J

90-14M-115-QD--J

112-14M-115-QD-J

144-14M-115-QD-J

168-14M-115-QD-J

192-14M-115-QD-M

216-14M-115-QD-M

28

29

30

32

34

36

38

40

44

48

52

56

60

64

68

72

80

90

112

144

168

192

216

MPB

MPB

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

A1F

D1F

D1F

D1F

D2F

D2

D3

D3

D3

D3

D3

4.912

5.088

5.263

5.614

5.965

6.316

6.667

7.018

7.720

8.412

9.123

9.825

10.527

11.229

11.930

12.632

14.036

15.790

19.650

25.264

29.475

33.686

37.896

4.808

4.983

5.157

5.507

5.858

6.208

6.559

6.909

7.610

8.311

9.013

9.715

10.417

11.119

11.820

12.522

13.926

15.680

19.540

25.154

29.365

33.576

37.786

5.402

5.402

5.763

6.114

6.465

6.816

7.167

7.518

8.395

8.914

9.687

10.355

11.067

11.593

12.500

13.006

14.620

-

-

-

-

-

-

MPB

MPB

SK

SK

SK

SF

SF

SF

E

E

F

F

F

J

J

J

J

J

J

J

J

J

J

1 1/4

1 1/4

1/2

1/2

1/2

1/2

1/2

1/2

7/8

7/8

1

1

1

1 1/2

1 1/2

1 1/2

1 1/2

1 1/2

1 1/2

1 1/2

1 1/2

1 1/2

1 1/2

2 11/16

2 11/16

2 5/8

2 5/8

2 5/8

2 15/16

2 15/16

2 15/16

3 1/2

3 1/2

4

4

4

4 1/2

4 1/2

4 1/2

4 1/2

4 1/2

4 1/2

4 1/2

4 1/2

4 1/2

4 1/2

3.125

3.125

3.906

3.906

4.063

4.813

4.938

5.063

6.125

6.500

7.188

7.875

8.500

9.250

10.000

10.688

12.125

14.500

18.250

23.875

28.094

32.375

36.375

3.688

3.688

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

9.000

9.000

9.000

9.000

9.000

9.000

9.000

4.938

4.938

4.938

4.938

4.938

4.938

4.938

4.938

4.938

4.938

4.938

4.938

4.938

4.938

4.938

4.938

4.938

-

-

-

-

-

-

-

-

1.250

1.250

1.250

1.250

1.250

1.250

1.625

1.625

2.500

2.500

2.500

3.188

3.188

3.188

3.188

3.188

3.188

3.188

3.188

3.188

3.188

1.250

1.250

1.250

1.250

1.250

1.063

1.063

1.063

0.625

0.750

0.000

0.000

0.000

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

0.563

5.250

5.250

5.250

5.250

5.250

5.250

5.250

5.250

5.250

5.250

5.250

5.250

5.250

5.250

5.250

5.250

5.250

5.250

5.250

5.250

5.250

5.250

5.250

-

-

2.000

2.000

2.000

2.000

2.000

2.000

1.813

1.938

1.375

1.375

1.375

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

5.000

5.000

1.938

1.938

1.938

2.063

2.063

2.063

2.750

2.750

3.750

3.750

3.750

4.625

4.625

4.625

4.625

4.625

4.625

4.625

4.625

4.625

4.625

1.500

1.500

2.000

2.000

2.000

2.000

2.000

2.000

1.813

1.688

1.375

1.375

1.375

1.063

1.063

1.063

1.063

1.063

1.063

1.063

1.063

1.063

1.063

21.50

23.50

11.00

14.50

18.30

17.00

21.00

22.40

25.50

33.20

42.00

50.50

58.30

72.30

83.20

94.10

90.00

102.00

121.00

168.00

198.00

235.00

340.00




G-59

O.D. C

L

F E

P.D.

F.D.

TYPE - MPB

P.D.L

EM

K

C

F

O.D.

TYPE - D

A

D

P.D.L

EM

K

C

F

O.D.

TYPE - DF

A

D

W

F.D.

P.D.

L

E

M

K

C

F

O.D.

TYPE - AF

D

A

W

F.D.

STEEL



OLD PART NUMBER

ON . OFT EE TH

Y ET PP.D.

BORES

WEIGHT

DIAMETERS

MAX.


BUSHINGSTOCK

DIMENSIONS

A C W D E F K L M

P36-14M-170

P38-14M-170

P40-14M-170

QD44-14M-170

QD48-14M-170

QD52-14M-170

QD56-14M-170

QD60-14M-170

QD64-14M-170

QD68-14M-170

QD72-14M-170

QD80-14M-170

QD90-14M-170

QD112-14M-170

QD144-14M-170

QD168-14M-170

QD192-14M-170

QD216-14M-170

36-14M-170-PB-1/12

38-14M-170-PB-1/12

40-14M-170-PB-1/12

44-14M-170-QD-E

48-14M-170-QD-E

52-14M-170-QD-F

56-14M-170-QD-F

60-14M-170-QD-J

64-14M-170-QD-J

68-14M-170-QD-J

72-14M-170-QD-J

80-14M-170-QD-J

90-14M-170-QD-J

112-14M-170-QD-M

144-14M-170-QD-M

168-14M-170-QD-M

192-14M-170-QD-M

216-14M-170-QD-M

36

38

40

44

48

52

56

60

64

68

72

80

90

112

144

168

192

216

DF1

DF1

DF1

AF1

AF1

AF1

AF1

AF1

AF1

AF1

AF1

AF2

A2

D3

D3

D3

D3

D3

6.316

6.667

7.018

7.720

8.421

9.123

9.825

10.527

11.229

11.930

12.632

14.036

15.790

19.650

25.264

29.475

33.686

37.896

6.206

6.557

6.908

7.610

8.311

9.013

9.715

10.417

11.119

11.820

12.522

13.926

15.680

19.540

25.154

29.365

33.576

37.786

6.722

7.156

7.500

8.375

8.938

9.688

10.344

11.063

11.750

12.500

13.063

14.625

-

-

-

-

-

-

MPB

MPB

MPB

E

E

F

F

J

J

J

J

J

J

M

M

M

M

M

1 1/2

1 1/2

1 1/2

7/8

7/8

1

1

1/2

1 1/2

1 1/2

1 1/2

1 1/2

1 1/2

2

2

2

2

2

3 3/8

3 5/8

3 3/4

3 1/2

3 1/2

4

4

4 1/2

4 1/2

4 1/2

4 1/2

4 1/2

4 1/2

5 1/2

5 1/2

5 1/2

5 1/2

5 1/2

4.688

4.938

5.063

6.125

6.500

7.188

7.875

8.500

9.250

10.000

10.688

12.250

14.500

18.250

23.625

28.094

32.250

36.375

5.000

5.375

5.563

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

9.000

9.000

11.375

11.375

11.375

11.375

11.375

7.063

7.063

7.063

7.063

7.063

7.063

7.063

7.063

7.063

7.063

7.063

7.063

-

-

-

-

-

-

-

-

-

1.625

1.625

2.500

2.500

3.188

3.188

3.188

3.188

3.188

3.188

5.188

5.188

5.188

5.188

5.188

0.125

0.125

0.125

1.688

1.688

1.688

1.688

0.719

0.563

0.563

0.563

0.563

0.563

0.219

0.219

0.219

0.219

0.219

7.375

7.375

7.375

7.375

7.375

7.375

7.375

7.375

7.375

7.375

7.375

7.375

7.375

7.375

7.375

7.375

7.375

7.375

-

-

-

2.875

2.875

2.438

2.438

2.281

2.125

2.125

2.125

2.125

2.125

1.438

1.438

1.438

1.438

1.438

6.000

6.000

6.000

2.750

2.750

3.750

3.750

4.625

4.625

4.625

4.625

4.625

4.625

6.750

6.750

6.750

6.750

6.750

2.625

2.625

2.625

2.875

2.875

2.438

2.438

1.906

2.063

2.063

2.063

2.063

2.063

0.750

0.750

0.750

0.750

0.750

47.30

53.60

58.80

32.80

42.00

60.90

62.00

80.70

99.50

107.60

125.00

129.50

76.50

188.20

237.00

279.20

417.00

375.00



G-60

P.D.L

EM

K

C

F

O.D.

TYPE - D

A

D

P.D.L

EM

K

C

F

O.D.

TYPE - DF

A

D

W

F.D.

P.D.

L

E

M

K

C

F

O.D.

TYPE - A

D

A

P.D.

L

E

M

K

C

F

O.D.

TYPE - AF

D

A

W

F.D.

STEEL



ON . OFT EE TH

ETYPP.D.

BORES

WEIGHT

DIAMETERS

MAX.


SBU HINGSTOCK

DIMENSIONS

A C W D E F K L M

34-20M-115-QD-F

36-20M-115-QD-F

38-20M-115-QD-F

40-20M-115-QD-F

44-20M-115-QD-F

48-20M-115-QD-J

52-20M-115-QD-J

56-20M-115-QD-J

60-20M-115-QD-J

64-20M-115-QD-J

68-20M-115-QD-J

72-20M-115-QD-J

80-20M-115-QD-M

90-20M-115-QD-M

112-20M-115-QD-M

144-20M-115-QD-N

168-20M-115-QD-N

192-20M-115-QD-N

216-20M-115-QD-N

34

36

38

40

44

48

52

56

60

64

68

72

80

90

112

144

168

192

216

AF1

AF1

AF1

AF1

AF1

DF1

DF1

DF2

DF2

DF2

DF2

DF2

DF2

DF2

D2

G3

G3

G3

G3

8.522

9.023

9.524

10.026

11.028

12.031

13.033

14.036

15.038

16.041

17.043

18.046

20.051

22.557

28.071

36.092

42.107

48.122

54.136

8.352

8.853

9.354

9.856

10.858

11.861

12.863

13.866

14.868

15.871

16.873

17.876

19.881

22.387

27.901

35.922

41.937

47.952

53.958

9.438

9.844

10.438

10.813

11.813

12.781

13.750

14.750

15.906

16.906

17.906

18.875

20.875

23.406

–

–

–

–

–

F

F

F

F

F

J

J

J

J

J

J

J

M

M

M

N

N

N

N

1

1

1

1

1

1 1/2

1 1/2

1 1/2

1 1/2

1 1/2

1 1/2

1 1/2

2

2

2

2 7/16

2 7/16

2 7/16

2 7/16

4

4

4

4

4

4 1/2

4 1/2

4 1/2

4 1/2

4 1/2

4 1/2

4 1/2

5 1/2

5 1/2

5 1/2

5 7/8

5 7/8

5 7/8

5 7/8

6.750

6.813

7.313

7.875

8.813

9.813

10.625

11.750

12.813

13.813

14.750

15.594

17.750

20.313

26.375

34.375

40.375

46.250

52.250

0.000

0.000

0.000

0.000

0.000

0.000

0.000

9.000

9.000

9.000

9.000

9.000

11.375

11.375

11.375

12.000

12.000

12.000

12.000

5.000

5.000

5.000

5.000

5.000

5.000

5.000

5.000

5.000

5.000

5.000

5.000

5.000

5.000

5.000

5.000

5.000

5.000

5.000

2.500

2.500

2.500

2.500

2.500

3.188

3.188

3.188

3.188

3.188

3.188

3.188

5.188

5.188

5.188

6.250

6.250

6.250

6.250

0.063

0.063

0.063

0.063

0.063

0.375

0.375

0.375

0.375

0.375

0.375

0.375

1.500

1.500

1.500

2.000

2.000

2.000

2.000

5.375

5.375

5.375

5.375

5.375

5.375

5.375

5.375

5.375

5.375

5.375

5.375

5.375

5.375

5.375

5.375

5.375

5.375

5.375

1.438

1.438

1.438

1.438

1.438

1.188

1.188

1.188

1.188

1.188

1.188

1.188

0.188

0.188

0.188

0.000

0.000

0.000

0.000

3.750

3.750

3.750

3.750

3.750

4.625

4.625

4.625

4.625

4.625

4.625

4.625

6.750

6.750

6.750

8.813

8.125

8.125

8.125

1.438

1.438

1.438

1.438

1.438

1.000

1.000

1.000

1.000

1.000

1.000

1.000

0.000

0.000

0.000

0.875

0.875

0.875

0.875

36.50

46.30

51.00

57.40

70.80

90.90

110.00

106.00

116.00

127.00

148.00

186.00

237.00

275.00

477.00

612.00

648.00

786.00

907.00

ON . OFT EE TH

ETYPP.D.

BORES

WEIGHT

DIAMETERS

MAX.


SBU HINGSTOCK

DIMENSIONS

A C W D E F K L M

34-20M-170-218-PB

36-20M-170-218-PB

38-20M-170-QD-J

40-20M-170-QD-J

44-20M-170-QD-J

48-20M-170-QD-M

52-20M-170-QD-M

56-20M-170-QD-M

60-20M-170-QD-M

64-20M-170-QD-M

68-20M-170-QD-M

72-20M-170-QD-M

80-20M-170-QD-M

90-20M-170-QD-M

112-20M-170-QD-N

144-20M-170-QD-N

168-20M-170-QD-P

192-20M-170-QD-P

216-20M-170-QD-P

34

36

38

40

44

48

52

56

60

64

68

72

80

90

112

144

168

192

216

FF1

FF1

AF1

AF1

AF1

DF1

DF1

DF1

DF1

DF1

DF2

DF2

DF2

DF2

D-2

D-3

G-3

G-3

G-3

8.522

9.023

9.524

10.026

11.028

12.031

13.033

14.036

15.038

16.041

17.043

18.046

20.051

22.557

28.071

36.092

42.107

48.122

54.136

8.352

8.853

9.354

9.856

10.858

11.861

12.863

13.866

14.868

15.871

16.873

17.876

19.881

22.387

27.901

35.922

41.937

47.952

53.958

9.438

9.844

10.438

10.813

11.813

12.781

13.750

14.750

15.906

16.906

17.906

18.875

20.875

23.406

–

–

–

–

–

MPB

MPB

J

J

J

M

M

M

M

M

M

M

M

M

N

N

P

P

P

2 1/8

2 1/8

1 1/2

1 1/2

1 1/2

2

2

2

2

2

2

2

2

2

2 7/16

2 7/16

2 15/16

2 15/16

2 15/16

4 1/4

4 1/2

4 1/2

4 1/2

4 1/2

5 1/2

5 1/2

5 1/2

5 1/2

5 1/2

5 1/2

5 1/2

5 1/2

5 1/2

5 7/8

5 7/8

7

7

7

6.500

7.000

7.375

7.750

8.875

9.875

10.688

11.813

12.875

13.875

14.813

15.594

17.813

20.375

26.250

34.250

40.250

46.250

52.125

6.500

7.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

11.375

11.375

11.375

11.375

12.000

12.000

14.000

14.000

14.000

7.125

7.125

7.125

7.125

7.125

7.125

7.125

7.125

7.125

7.125

7.125

7.125

7.125

7.125

7.125

7.125

7.125

7.125

7.125

–

–

3.188

3.188

3.188

5.188

5.188

5.188

5.188

5.188

5.188

5.188

5.188

5.188

6.250

6.250

7.250

7.250

7.250

1.250

1.250

0.625

0.750

0.625

0.188

0.188

0.188

0.188

0.188

0.188

0.188

0.188

0.188

0.750

0.750

1.188

1.188

1.188

7.500

7.500

7.500

7.500

7.500

7.500

7.500

7.500

7.500

7.500

7.500

7.500

7.500

7.500

7.500

7.500

7.500

7.500

7.500

–

–

2.188

2.313

2.188

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.250

1.250

1.063

1.063

1.063

6.500

6.500

4.625

4.625

4.625

6.750

6.750

6.750

6.750

6.750

6.750

6.750

6.750

6.750

8.125

8.125

9.375

9.375

9.375

2.250

2.250

2.125

2.000

2.125

0.813

0.813

0.813

0.813

0.813

0.813

0.813

0.813

0.813

0.000

0.000

0.813

0.813

0.813

87.20

98.70

64.00

73.40

88.10

120.00

149.00

177.00

209.00

236.00

214.00

238.00

262.00

303.00

473.00

520.00

619.00

783.00

902.00




G-61

TYPE - G

O.D.C

F

L

D

K

I.D.

E M

P.D.

W

P.D.L

EM

K

C

F

O.D.

TYPE - D

A

D

P.D.L

EM

K

C

F

O.D.

TYPE - DF

A

D

W

F.D.

P.D.

L

E

M

K

C

F

O.D.

TYPE - AF

D

A

W

F.D.

TYPE - FF

O.D.

A

F

L

E

M

P.D.

W

F.D.

P.D.L

EM

K

C

F

O.D.

TYPE - D

A

D

P.D.L

EM

K

C

F

O.D.

TYPE - DF

A

D

W

F.D.

P.D.

L

E

M

K

C

F

O.D.

TYPE - A

D

A

P.D.

L

E

M

K

C

F

O.D.

TYPE - AF

D

A

W

F.D.

TYPE - G

O.D.C

F

L

D

K

I.D.

E M

P.D.

W

TYPE - FF

O.D.

A

F

L

E

M

P.D.

W

F.D.

STEEL



ON . OFT EE TH

ETYPP.D.

BORES

WEIGHT

DIAMETERS

MAX.


SBU HINGSTOCK

DIMENSIONS

A C W D E F K L M

52-20M-290-QD-N

56-20M-290-QD-N

60-20M-290-QD-N

64-20M-290-QD-N

68-20M-290-QD-N

72-20M-290-QD-N

80-20M-290-QD-N

90-20M-290-QD-N

112-20M-290-QD-P

144-20M-290-QD-P

168-20M-290-QD-W

192-20M-290-QD-W

216-20M-290-QD-W

52

56

60

64

68

72

80

90

112

144

168

192

216

AF1

AF1

AF1

AF1

AF1

AF2

AF2

AF2

A2

A3

A3

A3

A3

13.033

14.036

15.038

16.041

17.043

18.046

20.051

22.557

28.071

36.092

42.107

48.122

54.136

12.863

13.866

14.868

15.871

16.873

17.876

19.881

22.387

27.901

35.922

41.937

47.952

53.958

13.750

14.750

15.906

16.906

17.906

18.875

20.875

23.406

–

–

–

–

–

N

N

N

N

N

N

N

N

P

P

W

W

W

2 7/16

2 7/16

2 7/16

2 7/16

2 7/16

2 7/16

2 7/16

2 7/16

2 15/16

2 15/16

4

4

4

5 7/8

5 7/8

5 7/8

5 7/8

5 7/8

5 7/8

5 7/8

5 7/8

7

7

8 1/2

8 1/2

8 1/2

10.813

11.875

13.000

14.000

14.938

15.594

17.906

20.500

26.125

34.000

40.000

46.000

52.000

0.000

0.000

0.000

0.000

0.000

12.000

12.000

12.000

14.000

14.000

17.000

17.000

17.000

11.875

11.875

11.875

11.875

11.875

11.875

11.875

11.875

11.875

11.875

11.875

11.875

11.875

6.250

6.250

6.250

6.250

6.250

6.250

6.250

6.250

7.250

7.250

9.000

9.000

9.000

0.500

0.500

0.500

0.500

0.500

0.500

0.500

0.500

0.250

0.250

0.188

0.188

0.188

12.250

12.250

12.250

12.250

12.250

12.250

12.250

12.250

12.250

12.250

12.250

12.250

12.250

2.500

2.500

2.500

2.500

2.500

2.500

2.500

2.500

2.500

2.500

2.688

2.688

2.688

8.125

8.125

8.125

8.125

8.125

8.125

8.125

8.125

9.375

9.375

11.375

11.375

11.375

3.500

3.500

3.500

3.500

3.500

3.500

3.500

3.500

2.500

2.500

0.563

0.563

0.563

202.00

237.00

276.00

320.00

368.00

404.00

376.00

431.00

799.00

1004.00

1410.00

1552.00

1441.00


ON . OFT EE TH

ETYPP.D.

BORES

WEIGHT

DIAMETERS

MAX.


SBU HINGSTOCK

DIMENSIONS

A C W D E F K L M

38-20M-230-278-PB

40-20M-230-278-PB

44-20M-230-278-PB

48-20M-230-QD-M

52-20M-230-QD-M

56-20M-230-QD-M

60-20M-230-QD-M

64-20M-230-QD-M

68-20M-230-QD-N

72-20M-230-QD-N

80-20M-230-QD-N

90-20M-230-QD-N

112-20M-230-QD-N

144-20M-230-QD-P

168-20M-230-QD-P

192-20M-230-QD-P

216-20M-230-QD-P

38

40

44

48

52

56

60

64

68

72

80

90

112

144

168

192

216

FF1

FF1

FF1

AF1

AF1

AF1

AF1

AF1

DF1

DF1

DF2

DF2

D2

D3

D3

G3

G3

9.524

10.026

11.028

12.031

13.033

14.036

15.038

16.041

17.043

18.046

20.051

22.557

28.071

36.092

42.107

48.122

54.136

9.354

9.856

10.858

11.861

12.863

13.866

14.868

15.871

16.873

17.876

19.881

22.387

27.901

35.922

41.937

47.952

53.958

10.438

10.813

11.813

12.781

13.750

14.750

15.906

16.906

17.906

18.875

20.875

23.406

–

–

–

–

–

MPB

MPB

MPB

M

M

M

M

M

N

N

N

N

N

P

P

W

W

2 7/8

2 7/8

2 7/8

2

2

2

2

2

2 7/8

2 7/8

2 7/8

2 7/8

2 7/8

2 15/16

2 15/16

4

4

4 3/4

5 1/4

6

5 1/2

5 1/2

5 1/2

5 1/2

5 1/2

5 7/8

5 7/8

5 7/8

5 7/8

5 7/8

7

7

8 1/2

8 1/2

7.563

8.000

8.938

9.938

10.656

11.625

12.938

13.938

14.875

15.594

17.875

20.438

26.250

34.250

40.250

46.000

52.000

7.500

8.000

8.250

0.000

0.000

0.000

0.000

0.000

0.000

0.000

12.000

12.000

12.000

14.000

14.000

17.000

17.000

9.500

9.500

9.500

9.500

9.500

9.500

9.500

9.500

9.500

9.500

9.500

9.500

9.500

9.500

9.500

9.500

9.500

–

–

–

5.188

5.188

5.188

5.188

5.188

6.250

6.250

6.250

6.250

6.250

7.250

7.250

9.000

9.000

1.250

1.250

1.250

0.313

0.313

0.313

0.313

0.313

0.188

0.188

0.188

0.188

0.188

0.938

0.938

1.000

1.000

9.875

9.875

9.875

9.875

9.875

9.875

9.875

9.875

9.875

9.875

9.875

9.875

9.875

9.875

9.875

9.875

9.875

–

–

–

2.000

2.000

2.000

2.000

2.000

11.813

11.813

11.813

11.813

11.813

1.313

1.313

1.500

1.500

7.500

8.500

8.500

6.750

6.750

6.750

6.750

6.750

8.125

8.125

8.125

8.125

8.125

9.375

9.375

11.375

11.375

3.625

2.625

2.625

2.688

2.688

2.688

2.688

2.688

1.813

1.813

1.813

1.813

1.813

1.313

1.313

0.625

0.625

128.00

156.00

189.00

140.00

175.00

204.00

234.00

270.00

341.00

410.00

343.00

398.00

664.00

886.00

934.00

1429.00

1317.00



G-62

STEEL



ON . OFT EE TH

ETYPP.D.

BORES

WEIGHT

DIAMETERS

MAX.


SBU HINGSTOCK

DIMENSIONS

A C W D E F K L M

52-20M-340-QD-N

56-20M-340-QD-N

60-20M-340-QD-N

64-20M-340-QD-N

68-20M-340-QD-N

72-20M-340-QD-N

80-20M-340-QD-P

90-20M-340-QD-P

112-20M-340-QD-P

144-20M-340-QD-W

168-20M-340-QD-W

192-20M-340-QD-S

216-20M-340-QD-S

52

56

60

64

68

72

80

90

112

144

168

192

216

AF1

AF1

AF1

AF1

AF1

AF2

AF2

AF2

A2

A3

A3

D3

D3

13.033

14.036

15.038

16.041

17.043

18.046

20.051

22.557

28.071

36.092

42.107

48.122

54.136

12.863

13.866

14.868

15.871

16.873

17.876

19.881

22.387

27.901

35.922

41.937

47.952

53.958

13.750

14.750

15.906

16.906

17.906

18.875

20.875

23.406

–

–

–

–

–

N

N

N

N

N

N

P

P

P

W

W

S

S

2 7/16

2 7/16

2 7/16

2 7/16

2 7/16

2 7/16

2 15/16

2 15/16

2 15/16

4

4

5 1/2

5 1/2

5 7/8

5 7/8

5 7/8

5 7/8

5 7/8

5 7/8

7

7

7

8 1/2

8 1/2

10

10

10.813

11.875

13.063

14.063

15.000

15.594

18.000

20.563

26.094

34.000

40.000

46.000

51.875

0.000

0.000

0.000

0.000

0.000

12.000

14.000

14.000

14.000

17.000

17.000

19.000

19.000

13.875

13.875

13.875

13.875

13.875

13.875

13.875

13.875

13.875

13.875

13.875

13.875

13.875

6.250

6.250

6.250

6.250

6.250

6.250

7.250

7.250

7.250

9.000

9.000

12.000

12.000

0.500

0.500

0.500

0.500

0.500

0.500

1.250

1.250

1.250

0.125

0.125

2.375

2.375

14.250

14.250

14.250

14.250

14.250

14.250

14.250

14.250

14.250

14.250

14.250

14.250

14.250

2.500

2.500

2.500

2.500

2.500

2.500

3.500

3.500

3.500

2.625

2.625

1.125

1.125

8.125

8.125

8.125

8.125

8.125

8.125

9.375

9.375

9.375

11.375

11.375

15.250

15.250

5.500

5.500

5.500

5.500

5.500

5.500

3.500

3.500

3.500

2.625

2.625

1.125

1.125

219.00

258.00

294.00

339.00

389.00

438.00

462.00

507.00

870.00

1215.00

1514.00

1817.00

1717.00



G-63

P.D.L

EM

K

C

F

O.D.

TYPE - D

A

D

P.D.

L

E

M

K

C

F

O.D.

TYPE - AF

D

A

W

F.D.

P.D.

L

E

M

K

C

F

O.D.

TYPE - A

D

A

STEEL


ART M RP NU BEON . OF

T ETE HBUSHING ETYP

DIAMETERS

P.D. O.D. F.D. TOCKS MAX.WEIGHT

22-8MX-12-TL-1008

22-8MX-12-PB-1/2

25-8MX-12-TL-1008

25-8MX-12-PB-1/2

28-8MX-12-TL-1008

28-8MX-12-PB-1/2

30-8MX-12-TL-1008

32-8MX-12-PB-1/2

32-8MX-12-TL-1210

34-8MX-12-TL-1610

36-8MX-12-TL-1610

38-8MX-12-TL-1610

40-8MX-12-TL-2012

42-8MX-12-TL-2012

45-8MX-12-TL-2012

48-8MX-12-TL-2012

50-8MX-12-TL-2012

53-8MX-12-TL-2012

56-8MX-12-TL-2012

60-8MX-12-TL-2012

63-8MX-12-TL-2012

67-8MX-12-TL-2012

71-8MX-12-TL-2012

75-8MX-12-TL-2012

80-8MX-12-TL-2012

90-8MX-12-TL-2012

112-8MX-12-TL-2012

140-8MX-12-TL-2012

180-8MX-12-TL-2012

224-8MX-12-TL-2012

22

22

25

25

28

28

30

32

32

34

36

38

40

42

45

48

50

53

56

60

63

67

71

75

80

90

112

140

180

224

1008

MPB

1108

MPB

1108

MPB

1108

MPB

1210

1610

1610

1610

2012

2012

2012

2012

2012

2012

2012

2012

2012

2012

2012

2012

2012

2012

2012

2012

2517

2517

AF-1

6F-1

AF-1

6F-1

AF-1

6F-1

AF-1

6F-1

AF-1

AF-1

AF-1

AF-1

BF-1

BF-1

BF-1

BF-1

BF-1

BF-1

BF-1

BF-1

CF-1

CF-1

CF-1

CF-1

CF-1

C-2

C-2

C-3

C-3

C-3

2.206

2.206

2.506

2.506

2.807

2.807

3.008

3.208

3.208

3.409

3.609

3.810

4.010

4.211

4.511

4.812

5.013

5.314

5.614

6.015

6.316

6.717

7.118

7.519

8.020

9.023

11.229

14.036

18.046

22.457

2.143

2.143

2.443

2.443

2.744

2.744

2.945

3.145

3.145

3.346

3.546

3.747

3.947

4.148

4.448

4.749

4.950

5.251

5.551

5.952

6.253

6.654

7.055

7.456

7.957

8.960

11.166

13.973

17.983

22.394

2.610

2.610

2.910

2.910

3.210

3.210

3.410

3.610

3.610

3.810

4.010

4.210

4.410

4.910

4.910

5.210

5.410

5.500

6.010

6.410

6.720

6.870

7.500

7.920

8.420

-

-

-

-

-

DIMENSIO SN

A B C D E F M F-CL

0.00

-

0.00

-

0.00

-

0.00

-

-

-

-

-

-

-

-

-

-

-

-

-

5.71

6.14

6.51

6.90

7.23

8.05

10.25

11.96

15.80

20.17

-

1.79

-

2.08

-

2.34

-

2.73

-

-

-

-

3.56

3.76

3.76

3.76

3.76

3.76

3.76

3.76

4.00

4.00

4.00

4.00

4.00

4.00

4.00

4.38

4.88

4.88

0.60

0.57

0.60

0.57

0.60

0.57

0.60

0.57

0.72

0.72

0.72

0.72

0.57

0.57

0.57

0.57

0.57

0.57

0.57

0.57

0.57

0.57

0.57

0.57

0.57

-

-

-

-

-

0.88

1.31

0.88

1.31

0.88

1.31

0.88

1.42

1.00

1.00

1.00

1.00

1.25

1.25

1.25

1.25

1.25

1.25

1.25

1.25

1.25

1.25

1.25

1.25

1.25

1.25

1.25

1.25

1.75

1.75

-

0.46

-

0.46

-

0.46

-

0.57

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

0.88

0.85

0.88

0.85

0.88

0.85

0.88

0.85

1.00

1.00

1.00

1.00

0.85

0.85

0.85

0.85

0.85

0.85

0.85

0.85

0.85

0.85

0.85

0.85

0.85

0.85

0.85

0.85

0.85

0.85

0.01

0.00

0.01

0.00

0.01

0.00

0.01

0.00

0.00

0.00

0.00

0.00

0.40

0.40

0.40

0.40

0.40

0.40

0.40

0.40

0.40

0.40

0.40

0.40

0.40

0.40

0.40

0.40

0.90

0.90

0.44

0.43

0.44

0.43

0.44

0.43

0.44

0.43

0.50

0.50

0.50

0.50

0.43

0.43

0.43

0.43

0.43

0.43

0.43

0.43

0.43

0.43

0.43

0.43

0.43

0.43

0.43

0.43

0.43

0.43

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1

1 3/16

1 1/8

1 1/2

1 1/8

1 3/4

1 1/8

2

1 1/4

1 11/16

1 11/16

1 11/16

2 1/8

2 1/8

2 1/8

2 1/8

2 1/8

2 1/8

2 1/8

2 1/8

2 1/8

2 1/8

2 1/8

2 1/8

2 1/8

2 1/8

2 1/8

2 1/8

2 11/16

2 11/16

0.40

1.00

0.60

1.40

0.90

1.80

1.10

2.50

1.20

1.10

1.40

1.70

1.70

2.10

2.60

3.40

3.70

4.70

5.40

6.30

4.10

4.30

4.70

5.10

5.80

8.00

12.00

17.00

26.60

37.00

BORE

FE M

A

D

B

O.D.

F

P.D.F.D.

TYPE - CFTYPE - BF

DE

B

O.D.

M

F

A

C

P.D.

F.D.

FE M

A

D

B

O.D.

P.D.

TYPE - C

ME DA

O.D.

F

C

P.D.

F.D.

TYPE - AF

W

CBO.D.

P.D.

F.D.

TYPE - 6F

8mm PITCH (TL) 12mm WIDE BELTS


G-64


2 2 - 8 M X - 1 2 - T L - 1 0 0 8


0.393

STEEL



T ETE HBUSHING ETYP

DIAMETERS

P.D. O.D. F.D. TOCKS MAX.WE GHTI

22-8MX-21-TL-1108

22-8MX-21-PB-1/2

25-8MX-21-TL-1108

25-8MX-21-PB-1/2

28-8MX-21-TL-1108

28-8MX-21-PB-1/2

30-8MX-21-TL-1108

30-8MX-21-PB-1/2

32-8MX-21-TL-1108

32-8MX-21-PB-1/2

34-8MX-21-TL-1108

36-8MX-21-TL-1108

38-8MX-21-TL-1108

40-8MX-21-TL-1108

42-8MX-21-TL-1108

45-8MX-21-TL-1108

48-8MX-21-TL-1108

50-8MX-21-TL-1108

53-8MX-21-TL-1108

56-8MX-21-TL-1108

60-8MX-21-TL-1108

63-8MX-21-TL-1108

67-8MX-21-TL-2517

71-8MX-21-TL-2517

75-8MX-21-TL-2517

80-8MX-21-TL-2517

90-8MX-21-TL-2517

112-8MX-21-TL-2517

140-8MX-21-TL-2517

180-8MX-21-TL-3020

224-8MX-21-TL-3020

22

22

25

25

28

28

30

30

32

32

34

36

38

40

42

45

48

50

53

56

60

63

67

71

75

80

90

112

140

180

224

1008

MPB

1108

MPB

1108

MPB

1108

MPB

1210

MPB

1610

1610

1610

2012

2012

2012

2012

2012

2012

2012

2012

2012

2517

2517

2517

2517

2517

2517

2517

3020

3020

AF-1

6F-1

AF-1

6F-1

AF-1

6F-1

AF-1

6F-1

AF-1

6F-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

CF-1

CF-1

CF-1

CF-1

CF-1

C-2

C-2

C-3

C-3

C-3

2.206

2.206

2.506

2.506

2.807

2.807

3.008

3.008

3.208

3.208

3.409

3.609

3.810

4.010

4.211

4.511

4.812

5.013

5.314

5.614

6.015

6.316

6.717

7.118

7.519

8.020

9.023

11.229

14.036

18.046

22.457

2.143

2.143

2.443

2.443

2.744

2.744

2.945

2.945

3.145

3.145

3.346

3.546

3.747

3.947

4.148

4.448

4.749

4.950

5.251

5.551

5.952

6.253

6.654

7.055

7.456

7.957

8.960

11.166

13.973

17.983

22.394

2.610

2.610

2.910

2.910

3.210

3.210

3.410

3.410

3.610

3.610

3.810

4.010

4.210

4.410

4.910

4.910

5.210

5.410

5.500

6.010

6.420

6.720

6.880

7.500

7.920

8.420

—

—

—

—

—

E IO SDIM NS N

A B C D E F M F-CL

1.63

—

1.92

—

2.18

—

2.38

—

2.58

—

2.66

2.96

3.15

—

—

—

—

—

—

—

—

5.71

6.14

6.51

6.90

7.23

7.78

10.00

11.74

15.49

19.86

—

1.79

—

2.08

—

2.34

—

2.54

—

2.73

—

—

—

—

—

—

—

—

—

—

—

3.76

4.50

4.50

4.50

4.50

4.50

4.50

4.88

6.25

6.25

0.92

0.92

0.92

0.92

0.92

0.92

0.92

0.92

0.92

0.92

0.92

0.92

0.92

0.97

0.97

0.97

0.97

0.97

0.97

0.97

0.97

0.92

0.92

0.92

0.92

0.92

—

—

—

—

—

0.88

1.65

0.88

1.65

0.88

1.65

0.88

1.77

1.00

1.77

1.00

1.00

1.00

1.25

1.25

1.25

1.25

1.25

1.25

1.25

1.25

1.25

1.75

1.75

1.75

1.75

1.75

1.75

1.75

2.00

2.00

—

0.45

—

0.45

—

0.45

—

0.57

—

0.57

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

1.20

1.20

1.20

1.20

1.20

1.20

1.20

1.20

1.20

1.20

1.20

1.20

1.20

1.25

1.25

1.25

1.25

1.25

1.25

1.25

1.25

1.20

1.20

1.20

1.20

1.20

1.20

1.20

1.20

1.20

1.20

0.33

0.00

0.33

0.00

0.33

0.00

0.33

0.00

0.20

0.00

0.20

0.20

0.20

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.05

0.55

0.55

0.55

0.55

0.55

0.55

0.55

0.80

0.80

0.60

0.60

0.60

0.60

0.60

0.60

0.60

0.60

0.60

0.60

0.60

0.60

0.60

0.63

0.63

0.63

0.63

0.63

0.63

0.63

0.63

0.60

0.60

0.60

0.60

0.60

0.60

0.60

0.60

0.60

0.60

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

7/8

7/8

1

1 3/16

1 1/8

1 1/2

1 1/8

1 3/4

1 1/8

1 13/16

1 1/4

2

1 11/16

1 11/16

1 11/16

2 1/8

2 1/8

2 1/8

2 1/8

2 1/8

2 1/8

2 1/8

2 1/8

2 1/8

2 11/16

2 11/16

2 11/16

2 11/16

2 11/16

2 11/16

2 11/16

3 1/4

3 1/4

0.60

1.30

0.80

1.80

1.00

2.30

1.30

2.80

1.40

3.20

1.40

1.66

1.90

2.00

2.40

3.00

3.70

4.20

5.00

5.80

6.90

4.10

5.70

6.10

6.50

7.50

11.00

16.00

24.10

39.00

53.40

BORE

FE M

A

D

B

O.D.

F

P.D.F.D.

TYPE - CF

FE M

A

D

B

O.D.

P.D.

TYPE - C

W

CBO.D.

P.D.

F.D.

TYPE - 6F

ME DA

O.D.

F

C

P.D.

F.D.

TYPE - AF



G-65


0.393

STEEL



T ETE HBUSHING ETYP

DIAMETERS


BORE

22-8MX-36-PB-1/2

25-8MX-36-PB-1/2

28-8MX-36-PB-1/2

30-8MX-36-PB-1/2

32-8MX-36-TL-1210

34-8MX-36-TL-1610

36-8MX-36-TL-1610

40-8MX-36-TL-1610

42-8MX-36-TL-2012

45-8MX-36-TL-2012

48-8MX-36-TL-2012

50-8MX-36-TL-2012

53-8MX-36-TL-2012

56-8MX-36-TL-2012

60-8MX-36-TL-2517

63-8MX-36-TL-2517

67-8MX-36-TL-2517

71-8MX-36-TL-2517

75-8MX-36-TL-2517

80-8MX-36-TL-3020

90-8MX-36-TL-3020

112-8MX-36-TL-3020

140-8MX-36-TL-3020

180-8MX-36-TL-3020

224-8MX-36-TL-3525

22

25

28

30

32

34

36

40

42

45

48

50

53

56

60

63

67

71

75

80

90

112

140

180

224

MPB

MPB

MPB

MPB

1210

1610

1610

2012

2012

2012

2012

2012

2012

2012

2517

2517

2517

2517

2517

3020

3020

3020

3020

3020

3525

6F-1

6F-1

6F-1

6F-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

DF-1

DF-1

DF-1

BF-1

B-1

C-2

C-3

C-3

C-3

2.206

2.506

2.807

3.008

3.208

3.409

3.609

4.010

4.211

4.511

4.812

5.013

5.314

5.614

6.015

6.316

6.717

7.118

7.519

8.020

9.023

11.229

14.036

18.046

22.457

2.143

2.443

2.744

2.945

3.145

3.346

3.546

3.947

4.148

4.448

4.749

4.950

5.251

5.551

5.952

6.253

6.654

7.055

7.456

7.957

8.960

11.166

13.973

17.983

22.394

2.610

2.910

3.210

3.410

3.610

3.810

4.010

4.410

4.910

4.910

5.210

5.410

5.500

6.010

6.420

6.720

6.880

7.500

7.920

8.420

—

—

—

—

—

E IO SDIM NS N

A B C D E F M F-CL

—

—

—

—

2.58

2.66

2.96

3.35

3.62

3.62

4.14

4.13

4.76

4.92

5.13

5.71

5.98

6.39

6.79

—

—

9.80

11.72

15.31

19.62

1.79

2.08

2.34

2.54

—

—

—

—

—

—

—

—

—

—

—

—

4.25

4.25

4.25

5.75

5.75

5.75

6.25

6.25

8.75

1.58

1.58

1.58

1.58

1.58

1.58

1.58

1.58

1.58

1.58

1.58

1.58

1.58

1.58

1.58

1.58

1.58

1.58

1.58

1.58

—

—

—

—

—

2.44

2.44

2.44

2.44

1.00

1.00

1.00

1.25

1.25

1.25

1.25

1.25

1.25

1.25

1.75

1.75

1.75

1.75

1.75

2.00

2.00

2.00

2.00

2.00

2.50

0.58

0.58

0.58

0.58

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

1.86

1.86

1.86

1.86

1.86

1.86

1.86

1.86

1.86

1.86

1.86

1.86

1.86

1.86

1.86

1.86

1.86

1.86

1.86

1.86

1.86

1.86

1.86

1.86

1.86

0.00

0.00

0.00

0.00

0.86

0.86

0.86

0.61

0.61

0.61

0.61

0.61

0.61

0.61

0.11

0.11

0.11

0.11

0.11

0.14

0.14

0.14

0.14

0.14

0.64

0.93

0.93

0.93

0.93

0.93

0.93

0.93

0.93

0.93

0.93

0.93

0.93

0.93

0.93

0.93

0.93

0.93

0.93

0.93

0.93

0.93

0.93

0.93

0.93

0.93

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

7/8

7/8

7/8

7/8

7/8

1 3/16

1 3/16

1 1/2

1 3/4

1 13/16

1 1/4

1 11/16

1 11/16

2 1/8

2 1/8

2 1/8

2 1/8

2 1/8

2 1/8

2 1/8

2 11/16

2 11/16

2 11/16

2 11/16

2 11/16

3 1/4

3 1/4

3 1/4

3 1/4

3 1/4

3 15/16

2.00

2.70

3.40

3.90

1.70

1.80

2.10

2.50

2.80

3.80

4.30

5.10

5.50

6.50

8.90

10.40

6.50

7.00

7.30

17.90

24.20

22.70

36.20

54.40

91.10

DE

B

O.D.

M

F

A P.D.

TYPE - B TYPE - BF

DE

B

O.D.

M

F

A

C

P.D.

F.D.

O.D.

E MF

BA

D

P.D.

F.D.

TYPE - DF

FE M

A

D

B

O.D.

P.D.

TYPE - C

ME DA

O.D.

F

C

P.D.

F.D.

TYPE - AF

W

CBO.D.

P.D.

F.D.

TYPE - 6F



G-66


0.393

STEEL



T ETE HBUSHING ETYP

DIAMETERS


BORE

22-8MX-62-PB-1

25-8MX-62-PB-1

28-8MX-62-PB-1

30-8MX-62-PB-1

32-8MX-62-PB-1

34-8MX-62-TL-1610

34-8MX-62-PB-1

36-8MX-62-TL-1610

36-8MX-62-PB-1

38-8MX-62-TL-1610

38-8MX-62-PB-1

38-8MX-62-TL-2012

40-8MX-62-PB-1

40-8MX-62-TL-2012

42-8MX-62-PB-1

42-8MX-62-TL-2012

45-8MX-62-PB-1

48-8MX-62-TL-2517

50-8MX-62-TL-2517

53-8MX-62-TL-2517

56-8MX-62-TL-2517

60-8MX-62-TL-3020

63-8MX-62-TL-3020

67-8MX-62-TL-3020

71-8MX-62-TL-3020

75-8MX-62-TL-3020

80-8MX-62-TL-3020

90-8MX-62-TL-3020

112-8MX-62-TL-3020

140-8MX-62-TL-3525

180-8MX-62-TL-3525

224-8MX-62-TL-3525

22

25

28

30

32

34

34

36

36

38

38

40

40

42

42

45

45

48

50

53

56

60

63

67

71

75

80

90

112

140

180

224

MPB

MPB

MPB

MPB

MPB

1610

MPB

1610

MPB

1610

MPB

2012

MPB

2012

MPB

2012

MPB

2517

2517

2517

2517

3020

3020

3020

3020

3020

3020

3020

3020

3525

3525

3525

6F-1

6F-1

6F-1

6F-1

6F-1

AF-1

6F-1

AF-1

6F-1

AF-1

6F-1

AF-1

6F-1

AF-1

6F-1

AF-1

6F-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

D-1

D-2

D-2

D-3

D-3

2.206

2.506

2.807

3.008

3.208

3.409

3.409

3.609

3.609

3.810

3.810

4.010

4.010

4.211

4.211

4.511

4.511

4.812

5.013

5.314

5.614

6.015

6.316

6.717

7.118

7.519

8.020

9.023

11.229

14.036

18.046

22.457

2.143

2.443

2.744

2.945

3.145

3.346

3.346

3.546

3.546

3.747

3.747

3.947

3.947

4.148

4.148

4.448

4.448

4.749

4.950

5.251

5.551

5.952

6.253

6.654

7.055

7.456

7.957

8.960

11.166

13.973

17.983

22.394

2.610

2.910

3.210

3.410

3.610

3.810

3.810

4.010

4.010

4.210

4.210

4.410

4.410

4.910

4.910

4.910

4.910

5.210

5.410

5.500

6.010

6.420

6.720

6.880

7.500

7.920

8.420

—

—

—

—

—

E IO SDIM NS N

A B C D E F M F-CL

—

—

—

—

—

2.66

—

2.96

—

3.15

—

3.35

—

3.62

—

3.62

—

4.14

4.13

4.76

4.92

5.13

5.71

6.14

6.51

6.90

7.23

7.39

9.60

12.40

15.33

19.38

1.79

2.08

2.34

2.54

2.73

—

2.82

—

3.13

—

3.32

—

3.52

—

3.79

—

3.79

—

—

—

—

—

—

—

—

—

—

5.42

5.42

8.75

8.75

8.75

2.63

2.63

2.63

2.63

2.63

2.63

2.63

2.63

2.63

2.63

2.63

2.63

2.63

2.63

2.63

2.63

2.63

2.63

2.63

2.63

2.63

2.63

2.63

2.63

2.63

2.63

2.63

—

—

—

—

—

3.56

3.56

3.56

3.50

3.50

1.00

3.50

1.00

3.56

1.00

3.56

1.25

3.63

1.25

3.63

1.25

3.63

1.75

1.75

1.75

1.75

2.00

2.00

2.00

2.00

2.00

2.00

2.00

2.00

2.50

2.50

2.50

0.65

0.65

0.65

0.58

0.59

—

0.59

—

0.65

—

0.65

—

0.72

—

0.72

—

0.72

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

2.91

2.91

2.91

2.92

2.91

2.91

2.91

2.91

2.91

2.91

2.91

2.91

2.91

2.91

2.91

2.91

2.91

2.91

2.91

2.91

2.91

2.91

2.91

2.91

2.91

2.91

2.91

2.91

2.91

2.91

2.91

2.91

0.00

0.00

0.00

0.00

0.00

1.91

0.00

1.91

0.00

1.91

0.00

1.66

0.00

1.66

0.00

1.66

0.00

1.16

1.16

1.16

1.16

0.91

0.91

0.91

0.91

0.91

0.91

0.91

0.91

0.41

0.41

0.41

1.46

1.46

1.46

1.46

1.46

1.46

1.46

1.46

1.46

1.46

1.46

1.46

1.46

1.46

1.46

1.46

1.46

1.46

1.46

1.46

1.46

1.46

1.46

1.46

1.46

1.46

1.46

1.46

1.46

1.46

1.46

1.46

1

1

1

1

1

1/2

1

1/2

1

1/2

1

1/2

1

1/2

1

1/2

1

1/2

1/2

1/2

1/2

7/8

7/8

7/8

7/8

7/8

7/8

7/8

7/8

1 3/16

1 3/16

1 3/16

1 3/16

1 1/2

1 3/4

1 13/16

2

1 11/16

2 1/8

1 11/16

2 5/16

1 11/16

2 7/16

2 1/8

2 9/16

2 1/8

2 3/4

2 1/8

2 3/4

2 11/16

2 11/16

2 11/16

2 11/16

3 1/4

3 1/4

3 1/4

3 1/4

3 1/4

3 1/4

3 1/4

3 1/4

3 15/16

3 15/16

3 15/16

2.40

3.40

4.50

5.20

6.10

2.60

6.90

2.80

8.00

3.10

9.10

3.30

10.30

3.60

11.60

5.10

13.10

5.10

6.30

6.70

8.30

8.90

9.90

12.00

14.40

16.80

20.50

30.10

31.00

62.80

91.60

127.10

ME DA

O.D.

F

C

P.D.

F.D.

TYPE - AFTYPE - 6F

O.D.

E MF

BA

D

P.D.

TYPE - D



G-67


W

CBO.D.

P.D.

F.D.

0.393

STEEL



T ETE HSHINGBU ETYP

E EDIAM T RS

P.D. DO. . F.D. T CS O K MAX.WE GHTI

BORE

22-8MS-12-PB-1/2

25-8MS-12-QD-JA

28-8MS-12-QD-JA

30-8MS-12-QD-JA

32-8MS-12-QD-JA

34-8MS-12-QD-JA

36-8MS-12-QD-SH

38-8MS-12-QD-SH

40-8MS-12-QD-SH

45-8MS-12-QD-SDS

48-8MS-12-QD-SDS

50-8MS-12-QD-SDS

56-8MS-12-QD-SDS

60-8MS-12-QD-SDS

63-8MS-12-QD-SDS

75-8MS-12-QD-SDS

80-8MS-12-QD-SDS

90-8MS-12-QD-SDS

112-8MS-12-QD-SK

140-8MS-12-QD-SK

180-8MS-12-QD-SF

224-8MS-12-QD-SF

22

25

28

30

32

34

36

38

40

45

48

50

56

60

63

75

80

90

112

140

180

224

MPB

JA

JA

JA

JA

JA

SH

SH

SH

SDS

SDS

SDS

SDS

SDS

SDS

SDS

SDS

SDS

SK

SK

SF

SF

FF-1

EF-1

EF-1

DF-1

DF-1

DF-1

DF-1

DF-1

DF-1

DF-1

DF-1

DF-1

DF-1

DF-1

DF-1

DF-2

DF-1

D-2

G-2

G-3

G-3

G-3

2.206

2.506

2.807

3.008

3.208

3.409

3.609

3.810

4.010

4.511

4.812

5.013

5.614

6.015

6.316

7.519

8.020

9.023

11.229

14.036

18.046

22.457

2.143

2.443

2.744

2.945

3.145

3.346

3.546

3.747

3.947

4.448

4.749

4.950

5.551

5.952

6.253

7.456

7.957

8.960

11.166

13.973

17.983

22.394

2.625

2.938

3.219

3.438

3.844

3.844

4.031

4.250

4.438

4.938

5.438

5.438

6.031

6.438

6.750

7.938

8.438

-

-

-

-

-

A

E IO SDIM NS N

B C D E F K ML

-

1.34

1.34

2.02

2.22

2.56

-

-

2.88

3.55

3.55

3.25

4.50

4.00

4.00

6.38

6.81

7.88

10.13

12.94

16.25

20.31

1.44

-

-

-

-

-

-

-

-

-

-

-

-

-

-

4.75

-

4.75

4.75

4.75

6.38

6.38

0.56

0.56

0.56

0.56

0.56

0.56

0.56

0.56

0.56

0.56

0.56

0.56

0.56

0.56

0.56

0.56

0.56

-

-

-

-

-

-

0.56

0.56

0.63

0.81

0.56

0.88

0.88

0.81

0.75

0.75

1.09

0.75

0.75

0.75

0.75

0.75

0.75

1.25

1.25

1.25

1.25

0.44

0.28

0.28

0.38

0.22

0.22

0.66

0.66

0.66

0.59

0.59

0.59

0.59

0.59

0.59

0.59

0.59

0.59

0.88

0.88

0.88

0.88

0.88

0.88

0.88

0.88

0.88

0.88

0.88

0.88

0.88

0.88

0.88

0.88

0.88

0.88

0.88

0.88

0.88

0.88

0.88

0.88

0.88

0.88

-

0.00

0.00

0.00

0.03

0.31

0.00

0.00

0.05

0.13

0.13

0.03

0.13

0.13

0.13

0.13

0.13

0.13

0.00

0.00

0.16

0.08

1.31

1.00

1.00

1.00

1.00

1.00

1.31

1.31

1.31

1.31

1.31

1.31

1.31

1.31

1.31

1.31

1.31

1.31

1.31

1.31

2.06

2.06

0.00

0.50

0.50

0.25

0.03

0.00

0.00

0.00

0.02

0.00

0.00

0.06

0.00

0.00

0.00

0.00

0.00

0.00

0.38

0.41

0.22

0.30

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1 3/16

1 1/4

1 1/4

1 1/4

1 1/4

1 1/4

1 11/16

1 11/16

1 11/16

2

2

2

2

2

2

2

2

2

2 5/8

2 5/8

2 15/16

2 15/16

0.90

0.70

0.90

1.00

1.10

1.30

1.50

1.70

2.00

2.50

2.80

3.10

4.10

4.80

5.50

6.90

9.10

9.90

16.50

15.90

30.00

41.20

P.D.

B

F

D

LA

E

O.D.

K

M

TYPE - D TYPE - EF

C

P.D.

B

L

A

E

O.D.

KDMF

F.D.P.D.

B

F

D

LA

E

O.D.

K

M

TYPE - DF

F.D.

C

TYPE - FF

P.D.

BA

E

O.D.

F

M L

C

F.D.P.D.

B

F

D

LA

E

O.D.

K

M

TYPE - G

8mm PITCH (QD) 12mm WIDE BELTS


G-68


STEEL



T ETE HSHINGBU ETYP

E EDIAM T RS


BORE

22-8MS-21-PB-1/2

25-8MS-21-PB-1/2

28-8MS-21-PB-1/2

30-8MS-21-PB-1/2

32-8MS-21-PB-1/2

34-8MS-21-QD-SH

36-8MS-21-QD-SH

38-8MS-21-QD-SH

40-8MS-21-QD-SH

45-8MS-21-QD-SDS

48-8MS-21-QD-SDS

50-8MS-21-QD-SDS

56-8MS-21-QD-SDS

60-8MS-21-QD-SK

63-8MS-21-QD-SK

75-8MS-21-QD-SK

80-8MS-21-QD-SK

90-8MS-21-QD-SK

112-8MS-21-QD-SK

140-8MS-21-QD-SF

180-8MS-21-QD-SF

224-8MS-21-QD-E

22

25

28

30

32

34

36

38

40

45

48

50

56

60

63

75

80

90

112

140

180

224

MPB

MPB

MPB

MPB

MPB

SH

SH

SH

SH

SDS

SDS

SDS

SDS

SK

SK

SK

SK

SK

SK

SF

SF

E

FF-1

FF-1

FF-1

FF-1

FF-1

EF-1

EF-1

DF-1

DF-1

DF-1

DF-1

DF-1

DF-1

DF-1

DF-1

DF-2

DF-2

D-2

D-2

D-3

D-3

C-3

2.206

2.506

2.807

3.008

3.208

3.409

3.609

3.810

4.010

4.511

4.812

5.013

5.614

6.015

6.316

7.519

8.020

9.023

11.229

14.036

18.046

22.457

2.143

2.443

2.744

2.945

3.145

3.346

3.546

3.747

3.947

4.448

4.749

4.950

5.551

5.952

6.253

7.456

7.957

8.960

11.166

13.973

17.983

22.394

2.625

2.938

3.219

3.438

3.844

3.844

4.031

4.250

4.438

4.938

5.438

5.438

6.031

6.438

6.750

7.938

8.438

-

-

-

-

-

A

E IO SDIM NS N

B C D E F K ML

1.44

1.75

2.00

2.06

2.25

1.81

1.81

2.94

3.06

3.44

3.63

3.81

4.50

-

-

6.38

6.88

7.88

10.06

12.94

16.25

20.31

1.78

2.08

2.34

2.53

2.72

-

-

-

-

-

-

-

-

-

-

4.75

4.38

4.75

4.75

6.38

6.38

7.50

0.97

0.97

0.97

0.97

0.97

0.97

0.97

0.97

0.97

0.97

0.97

0.97

0.97

0.97

0.97

0.97

0.97

-

-

-

-

-

-

-

-

-

-

0.81

0.78

0.81

0.81

0.75

0.75

0.75

0.75

1.25

1.25

1.25

1.25

1.25

1.25

1.25

1.25

1.63

0.44

0.44

0.44

0.56

0.56

0.59

0.47

0.38

0.38

0.44

0.44

0.44

0.44

0.88

0.88

0.88

0.88

0.88

0.88

0.94

0.94

1.25

1.25

1.25

1.25

1.25

1.25

1.25

1.25

1.25

1.25

1.25

1.25

1.25

1.25

1.25

1.25

1.25

1.25

1.25

1.25

1.25

1.25

1.25

-

-

-

-

-

0.00

0.00

0.25

0.44

0.25

0.31

0.31

0.25

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

1.31

1.31

1.31

1.31

1.31

1.31

1.31

1.31

1.31

1.31

1.31

1.31

1.31

1.31

1.31

1.31

1.31

1.31

1.31

2.06

2.06

2.75

0.38

0.38

0.38

0.50

0.50

0.66

0.53

0.19

0.00

0.25

0.19

0.19

0.25

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.38

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

7/8

1 3/16

1 1/2

1 3/4

1 13/16

2

1 11/16

1 11/16

1 11/16

1 11/16

2

2

2

2

2 5/8

2 5/8

2 5/8

2 5/8

2 5/8

2 5/8

2 15/16

2 15/16

3 1/2

1.10

1.40

1.80

2.20

2.60

1.80

1.80

2.10

2.40

3.00

3.50

3.90

4.90

6.80

7.70

9.10

9.70

14.50

19.70

23.60

34.70

50.10

P.D.

B

F

D

LA

E

O.D.

K

M

TYPE - DTYPE - C

P.D.

B

F

D

LA

E

O.D.

K

M

TYPE - EF

C

P.D.

B

L

A

E

O.D.

KDMF

F.D.P.D.

B

F

D

LA

E

O.D.

K

M

TYPE - DF

F.D.

C

TYPE - FF

P.D.

BA

E

O.D.

F

M L

C

F.D.



G-69


STEEL



T ETE HSHINGBU ETYP

E EDIAM T RS


BORE

22-8MS-36-PB-1/2

25-8MS-36-PB-1/2

28-8MS-36-PB-1/2

30-8MS-36-PB-1/2

32-8MS-36-PB-1/2

34-8MS-36-QD-SH

36-8MS-36-QD-SH

38-8MS-36-QD-SH

40-8MS-36-QD-SH

45-8MS-36-QD-SD

48-8MS-36-QD-SD

50-8MS-36-QD-SK

56-8MS-36-QD-SK

60-8MS-36-QD-SK

63-8MS-36-QD-SK

75-8MS-36-QD-SF

80-8MS-36-QD-SF

90-8MS-36-QD-SF

112-8MS-36-QD-SF

140-8MS-36-QD-E

180-8MS-36-QD-E

224-8MS-36-QD-E

22

25

28

30

32

34

36

38

40

45

48

50

56

60

63

75

80

90

112

140

180

224

MPB

MPB

MPB

MPB

MPB

SH

SH

SH

SH

SD

SD

SK

SK

SK

SK

SF

SF

SF

SF

E

E

E

FF-1

FF-1

FF-1

FF-1

FF-1

AF-1

AF-1

AF-1

DF-1

DF-1

DF-1

DF-1

DF-1

DF-1

DF-1

DF-1

DF-1

D-1

D-2

D-2

D-2

D-2

2.206

2.506

2.807

3.008

3.208

3.409

3.609

3.810

4.010

4.511

4.812

5.013

5.614

6.015

6.316

7.519

8.020

9.023

11.229

14.036

18.046

22.457

2.143

2.443

2.744

2.945

3.145

3.346

3.546

3.747

3.947

4.448

4.749

4.950

5.551

5.952

6.253

7.456

7.957

8.960

11.166

13.973

17.983

22.394

2.625

2.938

3.219

3.438

3.844

3.844

4.031

4.250

4.438

4.938

5.438

5.438

6.031

6.438

6.750

7.938

8.438

-

-

-

-

-

A

E IO SDIM NS N

B C D E F K ML

1.44

1.75

2.00

2.06

2.25

1.81

2.75

2.94

3.06

3.44

3.63

4.03

4.56

4.88

5.19

6.34

6.88

7.81

10.06

12.47

16.38

20.31

1.78

2.08

2.34

2.53

2.72

-

-

-

-

-

-

-

-

-

-

-

-

-

6.38

7.50

7.50

7.50

1.59

1.59

1.59

1.59

1.59

1.59

1.59

1.59

1.59

1.59

1.59

1.59

1.59

1.59

1.59

1.59

1.59

-

-

-

-

-

-

-

-

-

-

0.81

0.81

0.81

0.81

1.25

1.25

1.25

1.25

1.25

1.25

1.25

1.25

1.25

1.25

1.63

1.63

1.63

0.44

0.44

0.44

0.44

0.44

1.06

0.03

0.03

0.03

0.03

0.03

0.50

0.50

0.50

0.50

0.56

0.56

0.56

0.56

0.84

0.94

0.94

1.88

1.88

1.88

1.88

1.88

1.88

1.88

1.88

1.88

1.88

1.88

1.88

1.88

1.88

1.88

1.88

1.88

1.88

1.88

1.88

1.88

1.88

-

-

-

-

-

0.00

0.69

0.69

0.69

0.38

0.38

0.38

0.38

0.38

0.38

0.38

0.38

0.38

0.38

0.25

0.25

0.25

1.81

1.81

1.81

1.81

1.81

1.31

1.31

1.31

1.31

1.81

1.81

1.94

1.94

1.94

1.94

2.06

2.06

2.06

2.06

2.75

2.75

2.75

0.63

0.63

0.63

0.63

0.63

0.66

0.38

0.38

0.38

0.25

0.25

0.25

0.25

0.25

0.25

0.25

0.25

0.25

0.25

0.00

0.00

0.00

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

7/8

7/8

7/8

1 3/16

1 1/2

1 3/4

1 13/16

2

1 11/16

1 11/16

1 11/16

1 11/16

2

2

2 5/8

2 5/8

2 5/8

2 5/8

2 15/16

2 15/16

2 15/16

2 15/16

3 1/2

3 1/2

3 1/2

1.50

2.00

2.60

3.10

3.60

2.80

2.40

2.70

3.10

4.60

5.50

5.00

6.80

8.20

9.40

14.80

15.20

21.20

29.90

37.60

49.90

70.20

P.D.

B

F

D

LA

E

O.D.

K

M

TYPE - D

B

F

D M

LA

E

O.D.

K

F.D.

C

P.D.

TYPE - AF

P.D.

B

F

D

LA

E

O.D.

K

M

TYPE - DF

F.D.

C

TYPE - FF

P.D.

BA

E

O.D.

F

M L

C

F.D.



G-70


STEEL



T ETE HSHINGBU ETYP

E EDIAM T RS


BORE

25-8MS-62-PB-1/2

28-8MS-62-PB-1/2

30-8MS-62-PB-1/2

32-8MS-62-PB-1/2

34-8MS-62-PB-1/2

36-8MS-62-PB-1/2

38-8MS-62-PB-1/2

40-8MS-62-PB-1/2

45-8MS-62-PB-1/2

48-8MS-62-PB-1/2

50-8MS-62-QD-SK

56-8MS-62-QD-SF

60-8MS-62-QD-SF

63-8MS-62-QD-SF

75-8MS-62-QD-SF

80-8MS-62-QD-SF

90-8MS-62-QD-E

112-8MS-62-QD-E

140-8MS-62-QD-E

180-8MS-62-QD-F

224-8MS-62-QD-F

25

28

30

32

34

36

38

40

45

48

50

56

60

63

75

80

90

112

140

180

224

MPB

MPB

MPB

MPB

MPB

MPB

MPB

MPB

MPB

MPB

SK

SF

SF

SF

SF

SF

E

E

E

F

F

FF-1

FF-2

FF-3

FF-4

FF-5

FF-6

FF-7

FF-8

FF-9

FF-10

AF-1

DF-1

DF-1

DF-1

DF-1

DF-1

D-1

D-2

D-2

D-3

D-3

2.506

2.807

3.008

3.208

3.409

3.609

3.810

4.010

4.511

4.812

5.013

5.614

6.015

6.316

7.519

8.020

9.023

11.229

14.036

18.046

22.457

2.443

2.744

2.945

3.145

3.346

3.546

3.747

3.947

4.448

4.749

4.950

5.551

5.952

6.253

7.456

7.957

8.960

11.166

13.973

17.983

22.394

2.938

3.219

3.438

3.844

3.844

4.031

4.250

4.438

4.938

5.438

5.438

6.031

6.438

6.750

7.938

8.438

-

-

-

-

-

A

E IO SDIM NS N

B C D E F K ML

1.75

2.00

2.06

2.25

2.38

2.56

2.69

2.81

3.00

3.50

4.00

4.72

5.06

5.31

6.50

6.94

7.69

9.88

12.50

16.38

20.31

2.08

2.34

2.53

2.72

2.81

3.13

3.31

3.50

3.78

4.31

-

-

-

-

-

-

-

7.50

7.50

7.25

7.25

2.63

2.63

2.63

2.63

2.63

2.63

2.63

2.63

2.63

2.63

2.63

2.63

2.63

2.63

2.63

2.63

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

1.25

1.25

1.25

1.25

1.25

1.25

1.63

1.63

1.63

2.50

2.50

0.59

0.59

0.59

0.59

0.59

0.66

0.66

1.03

0.03

0.03

0.03

0.03

0.03

0.03

0.03

0.03

0.41

0.41

0.41

1.06

1.06

2.91

2.91

2.91

2.91

2.91

2.91

2.91

2.91

2.91

2.91

2.91

2.91

2.91

2.91

2.91

2.91

2.91

2.91

2.91

2.91

2.91

-

-

-

-

-

-

-

-

-

-

0.91

0.91

0.91

0.91

0.91

0.91

0.78

0.78

0.78

0.31

0.31

2.44

2.44

2.44

2.44

2.44

2.44

2.44

2.44

2.44

2.44

1.94

2.06

2.06

2.06

2.06

2.06

2.75

2.75

2.75

3.75

3.75

1.06

1.06

1.06

1.06

1.06

1.13

1.13

1.19

1.19

1.50

0.75

0.75

0.75

0.75

0.75

0.75

0.50

0.50

0.50

0.09

0.09

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

7/8

7/8

7/8

1

1

1 1/2

1 3/4

1 13/16

2

2 1/8

2 5/16

2 7/16

2 9/16

2 3/4

3 1/8

2 5/8

2 15/16

2 15/16

2 15/16

2 15/16

2 15/16

3 1/2

3 1/2

3 1/2

4

4

2.90

3.70

4.40

5.00

5.70

6.60

7.40

8.40

10.80

12.60

6.70

7.80

9.40

10.60

18.90

23.50

28.80

43.40

54.20

67.30

92.20

P.D.

B

F

D

LA

E

O.D.

K

M

TYPE - D

B

F

D M

LA

E

O.D.

K

F.D.

C

P.D.

TYPE - AF

P.D.

B

F

D

LA

E

O.D.

K

M

TYPE - DF

F.D.

C

TYPE - FF

P.D.

BA

E

O.D.

F

M L

C

F.D.



G-71


STEEL



T ETE HBUSHING ETYP

DIAMETERS


BORE

28-14MX-20-TL-2012

29-14MX-20-TL-2012

30-14MX-20-TL-2012

31-14MX-20-TL-2012

32-14MX-20-TL-2012

33-14MX-20-TL-2012

34-14MX-20-TL-2012

35-14MX-20-TL-2012

36-14MX-20-TL-2517

37-14MX-20-TL-2517

38-14MX-20-TL-2517

39-14MX-20-TL-2517

40-14MX-20-TL-2517

43-14MX-20-TL-2517

45-14MX-20-TL-3020

48-14MX-20-TL-3020

50-14MX-20-TL-3020

53-14MX-20-TL-3020

56-14MX-20-TL-3525

60-14MX-20-TL-3525

63-14MX-20-TL-3525

67-14MX-20-TL-3525

71-14MX-20-TL-3525

75-14MX-20-TL-3525

80-14MX-20-TL-3525

90-14MX-20-TL-3525

112-14MX-20-TL-3525

140-14MX-20-TL-3525

180-14MX-20-TL-3525

190-14MX-20-TL-3525

200-14MX-20-TL-3525

224-14MX-20-TL-3525

28

29

30

31

32

33

34

35

36

37

38

39

40

43

45

48

50

53

56

60

63

67

71

75

80

90

112

140

168

180

200

224

2012

2012

2012

2012

2012

2012

2012

2012

2517

2517

2517

2517

2517

2517

3020

3020

3020

3020

3525

3525

3525

3525

3525

3525

3525

3525

3525

3525

3525

3525

3525

4030

A1-F

A1-F

A1-F

A1-F

A1-F

A1-F

A1-F

A1-F

BF-1

BF-1

BF-1

BF-1

BF-1

BF-1

BF-1

BF-1

BF-1

BF-1

BF-1

BF-1

BF-1

BF-1

CF-1

CF-1

CF-2

C-2

C-3

C-3

C-3

C-3

C-3

C-3

4.912

5.088

5.263

5.439

5.614

5.790

5.965

6.141

6.316

6.492

6.667

6.842

7.018

7.544

7.895

8.421

8.772

9.299

9.825

10.527

11.053

11.755

12.457

13.158

14.036

15.790

19.650

24.562

29.475

31.580

35.089

39.300

4.802

4.978

5.153

5.329

5.504

5.680

5.855

6.031

6.206

6.382

6.557

6.732

6.908

7.434

7.785

8.311

8.662

9.189

9.715

10.417

10.943

11.645

12.347

13.048

13.926

15.680

19.540

24.452

29.365

31.470

34.979

39.190

5.400

5.760

5.760

6.110

6.110

6.460

6.460

6.820

6.820

7.170

7.170

7.520

7.520

8.040

8.400

8.940

9.290

9.690

10.360

11.070

11.590

12.500

13.070

13.730

14.620

—

—

—

—

—

—

—

E IO SDIM NS N

A B C D E F M F-CL

3.61

3.99

3.99

4.22

4.22

4.53

4.53

4.95

—

—

—

—

—

—

—

—

—

—

—

—

—

—

11.05

11.68

12.56

14.26

16.47

21.04

25.90

27.99

31.46

35.63

—

—

—

—

—

—

—

—

4.25

4.25

4.25

4.25

4.25

4.25

5.41

5.75

5.75

5.75

8.70

8.75

8.75

8.75

8.75

8.75

8.75

8.75

8.75

8.75

8.75

8.75

8.75

10.00

1.04

1.04

1.04

1.04

1.04

1.04

1.04

1.04

1.04

1.04

1.04

1.04

1.04

1.04

1.04

1.04

1.04

1.04

1.04

1.04

1.04

1.04

1.04

1.04

1.04

—

—

—

—

—

—

—

1.25

1.25

1.25

1.25

1.25

1.25

1.25

1.25

1.75

1.75

1.75

1.75

1.75

1.75

2.00

2.00

2.00

2.00

2.50

2.50

2.50

2.50

2.50

2.50

2.50

2.50

2.50

2.50

2.50

2.50

2.50

3.00

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

1.36

1.36

1.36

1.36

1.36

1.36

1.36

1.36

1.36

1.36

1.36

1.36

1.36

1.36

1.36

1.36

1.36

1.36

1.36

1.36

1.36

1.36

1.36

1.36

1.36

1.36

1.36

1.36

1.36

1.36

1.36

1.36

0.11

0.11

0.11

0.11

0.11

0.11

0.11

0.11

0.39

0.39

0.39

0.39

0.39

0.39

0.64

0.64

0.64

0.64

1.14

1.14

1.14

1.14

1.14

1.14

1.14

1.14

1.14

1.14

1.14

1.14

1.14

1.64

0.68

0.68

0.68

0.68

0.68

0.68

0.68

0.68

0.68

0.68

0.68

0.68

0.68

0.68

0.68

0.68

0.68

0.68

0.68

0.68

0.68

0.68

0.68

0.68

0.68

0.68

0.68

0.68

0.68

0.68

0.68

0.68

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

7/8

7/8

7/8

7/8

1 3/16

1 3/16

1 3/16

1 3/16

1 3/16

1 3/16

1 3/16

1 3/16

1 3/16

1 3/16

1 3/16

1 3/16

1 3/16

1 7/16

2 1/8

2 1/8

2 1/8

2 1/8

2 1/8

2 1/8

2 1/8

2 1/8

2 11/16

2 11/16

2 11/16

2 11/16

2 11/16

2 11/16

3 1/4

3 1/4

3 1/4

3 1/4

3 15/16

3 15/16

3 15/16

3 15/16

3 15/16

3 15/16

3 15/16

3 15/16

3 15/16

3 15/16

3 15/16

3 15/16

3 15/16

4 7/16

3.90

4.30

4.80

5.30

5.80

6.30

6.80

7.30

8.40

9.30

9.90

10.70

11.40

14.00

15.00

18.20

20.80

24.10

30.20

36.90

42.30

50.30

40.60

42.30

48.00

53.80

70.10

94.80

120.80

134.60

158.10

201.10

FE M

A

D

B

O.D.

F

P.D.F.D.

TYPE - CFTYPE - BF

DE

B

O.D.

M

F

A

C

P.D.

F.D.

FE M

A

D

B

O.D.

P.D.

TYPE - C

ME DA

O.D.

F

C

P.D.

F.D.

TYPE - AF



G-72


STEEL



T ETE HBUSHING ETYP

DIAMETERS

P.D. O.D. F.D.WE GHTI

28-14MX-37-TL-2012

28-14MX-37-PB-1

29-14MX-37-TL-2517

30-14MX-37-TL-2517

31-14MX-37-TL-2517

32-14MX-37-TL-2517

33-14MX-37-TL-2517

34-14MX-37-TL-2517

35-14MX-37-TL-2517

36-14MX-37-TL-2517

37-14MX-37-TL-2517

38-14MX-37-TL-3020

39-14MX-37-TL-3020

40-14MX-37-TL-3020

43-14MX-37-TL-3020

45-14MX-37-TL-3020

48-14MX-37-TL-3020

50-14MX-37-TL-3020

53-14MX-37-TL-3020

56-14MX-37-TL-3525

60-14MX-37-TL-3525

63-14MX-37-TL-3525

67-14MX-37-TL-3525

71-14MX-37-TL-3525

75-14MX-37-TL-3525

80-14MX-37-TL-3525

90-14MX-37-TL-3525

112-14MX-37-TL-3525

140-14MX-37-TL-3525

168-14MX-37-TL-4030

180-14MX-37-TL-4030

200-14MX-37-TL-4030

224-14MX-37-TL-4030

28

28

29

30

31

32

33

34

35

36

37

38

39

40

43

45

48

50

53

56

60

63

67

71

75

80

90

112

140

168

180

200

224

MPB

2012

2517

2517

2517

2517

2517

2517

2517

2517

2517

3020

3020

3020

3020

3020

3020

3020

3020

3525

3525

3525

3525

3525

3525

3525

3525

3525

3525

4030

4030

4030

4030

6F-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

BF-1

BF-1

BF-1

BF-1

BF-1

CF-1

CF-2

C-2

C-3

C-3

C-3

C-3

C-3

C-3

4.912

4.912

5.088

5.263

5.439

5.614

5.790

5.965

6.141

6.316

6.492

6.667

6.842

7.018

7.544

7.895

8.421

8.772

9.299

9.825

10.527

11.053

11.755

12.457

13.158

14.036

15.790

19.650

24.562

29.475

31.580

35.089

39.300

4.802

4.802

4.978

5.153

5.329

5.504

5.680

5.855

6.031

6.206

6.382

6.557

6.732

6.908

7.434

7.785

8.311

8.662

9.189

9.715

10.417

10.943

11.645

12.347

13.048

13.926

15.680

19.540

24.452

29.365

31.470

34.979

39.190

5.400

5.400

5.760

5.760

6.110

6.110

6.460

6.460

6.820

6.820

7.170

7.170

7.520

7.520

8.040

8.400

8.940

9.290

9.690

10.360

11.070

11.590

12.500

13.070

13.730

14.620

—

—

—

—

—

—

—

E IO SDIM NS N

A B C D E F M F-CL

—

3.61

3.99

3.99

4.22

4.22

4.53

4.53

4.95

4.95

5.27

5.27

5.54

5.54

6.16

6.42

6.96

7.44

7.84

—

—

—

—

—

11.68

12.56

14.26

16.39

20.84

25.51

27.59

31.07

35.24

3.97

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

8.70

8.75

8.75

8.75

8.75

8.75

8.75

8.75

8.75

8.75

10.00

10.00

10.00

10.00

1.74

1.74

1.74

1.74

1.74

1.74

1.74

1.74

1.74

1.74

1.74

1.74

1.74

1.74

1.74

1.74

1.74

1.74

1.74

1.74

1.74

1.74

1.74

1.74

1.74

1.74

—

—

—

—

—

—

—

2.86

1.25

1.75

1.75

1.75

1.75

1.75

1.75

1.75

1.75

1.75

2.00

2.00

2.00

2.00

2.00

2.00

2.00

2.00

2.50

2.50

2.50

2.50

2.50

2.50

2.50

2.50

2.50

2.50

3.00

3.00

3.00

3.00

0.80

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

2.06

2.06

2.06

2.06

2.06

2.06

2.06

2.06

2.06

2.06

2.06

2.06

2.06

2.06

2.06

2.06

2.06

2.06

2.06

2.06

2.06

2.06

2.06

2.06

2.06

2.06

2.06

2.06

2.06

2.06

2.06

2.06

2.06

0.00

0.81

0.31

0.31

0.31

0.31

0.31

0.31

0.31

0.31

0.31

0.06

0.06

0.06

0.06

0.06

0.06

0.06

0.06

0.44

0.44

0.44

0.44

0.44

0.44

0.44

0.44

0.44

0.44

0.94

0.94

0.94

0.94

1.03

1.03

1.03

1.03

1.03

1.03

1.03

1.03

1.03

1.03

1.03

1.03

1.03

1.03

1.03

1.03

1.03

1.03

1.03

1.03

1.03

1.03

1.03

1.03

1.03

1.03

1.03

1.03

1.03

1.03

1.03

1.03

1.03

TOCKS MAX.

BORE

1

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

7/8

7/8

7/8

7/8

7/8

7/8

7/8

7/8

1 3/16

1 3/16

1 3/16

1 3/16

1 3/16

1 3/16

1 3/16

1 3/16

1 3/16

1 3/16

1 7/16

1 7/16

1 7/16

1 7/16

2 15/16

2 1/8

2 11/16

2 11/16

2 11/16

2 11/16

2 11/16

2 11/16

2 11/16

2 11/16

2 11/16

3 1/4

3 1/4

3 1/4

3 1/4

3 1/4

3 1/4

3 1/4

3 1/4

3 15/16

3 15/16

3 15/16

3 15/16

3 15/16

3 15/16

3 15/16

3 15/16

3 15/16

3 15/16

4 7/16

4 7/16

4 7/16

4 7/16

11.70

5.20

5.10

5.80

6.40

7.20

7.80

8.70

9.30

10.20

10.80

10.30

11.30

12.30

15.60

18.00

21.50

24.10

28.30

33.00

40.60

46.70

55.60

61.20

46.90

52.50

61.50

89.10

125.50

175.10

191.40

224.90

267.70

ME DA

O.D.

F

C

P.D.

F.D.

TYPE - AF

FE M

A

D

B

O.D.

F

P.D.F.D.

TYPE - CFTYPE - BF

DE

B

O.D.

M

F

A

C

P.D.

F.D.

FE M

A

D

B

O.D.

P.D.

TYPE - CTYPE - 6F



G-73


W

CBO.D.

P.D.

F.D.

0.393

STEEL



T ETE HBUSHING ETYP

DIAMETERS

P.D. O.D. F.D. STOCK MAX.WE GHTI

BORE

28-14MX-68-PB-1

29-14MX-68-TL-2517

29-14MX-68-100-PB

30-14MX-68-TL-2517

31-14MX-68-TL-2517

31-14MX-68-PB-1

32-14MX-68-TL-2517

32-14MX-68-PB-1

33-14MX-68-TL-2517

33-14MX-68-PB-1

34-14MX-68-TL-2517

34-14MX-68-PB-1

35-14MX-68-TL-3020

36-14MX-68-TL-3020

37-14MX-68-TL-3020

38-14MX-68-TL-3020

39-14MX-68-TL-3020

40-14MX-68-TL-3020

43-14MX-68-TL-3020

45-14MX-68-TL-3020

48-14MX-68-TL-3525

50-14MX-68-TL-3525

53-14MX-68-TL-3525

56-14MX-68-TL-3525

60-14MX-68-TL-3525

63-14MX-68-TL-3525

67-14MX-68-TL-3525

71-14MX-68-TL-3525

75-14MX-68-TL-3525

80-14MX-68-TL-3525

90-14MX-68-TL-4030

112-14MX-68-TL-4030

140-14MX-68-TL-4030

168-14MX-68-TL-4030

180-14MX-68-TL-4030

200-14MX-68-TL-4030

224-14MX-68-TL-4030

28

29

29

30

31

31

32

32

33

33

34

34

35

36

37

38

39

40

43

45

48

50

53

56

60

63

67

71

75

80

90

112

140

168

180

200

224

MPB

2517

MPB

2517

2517

MPB

2517

MPB

2517

MPB

2517

MPB

3020

3020

3020

3020

3020

3020

3020

3020

3525

3525

3525

3525

3525

3525

3525

3525

3525

3525

4030

4030

4030

4030

4030

4030

4030

6F-1

AF-1

6F-1

AF-1

AF-1

6F-1

AF-1

6F-1

AF-1

6F-1

AF-1

6F-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

DF-1

DF-1

DF-1

DF-2

D-2

D-3

D-3

C-3

C-3

C-3

C-3

4.912

5.088

5.088

5.263

5.439

5.439

5.614

5.614

5.790

5.790

5.965

5.965

6.141

6.316

6.492

6.667

6.842

7.018

7.544

7.895

8.421

8.772

9.299

9.825

10.527

11.053

11.755

12.457

13.158

14.036

15.790

19.650

24.562

29.475

31.580

35.089

39.300

4.802

4.978

4.978

5.153

5.329

5.329

5.504

5.504

5.680

5.680

5.855

5.855

6.031

6.206

6.382

6.557

6.732

6.908

7.434

7.785

8.311

8.662

9.189

9.715

10.417

10.943

11.645

12.347

13.048

13.926

15.680

19.540

24.452

29.365

31.470

34.979

39.190

5.400

5.760

5.760

5.760

6.110

6.110

6.110

6.110

6.460

6.470

6.460

6.470

6.820

6.820

7.170

7.170

7.520

7.520

8.040

8.390

8.940

9.290

9.690

10.360

11.070

11.590

12.500

13.070

13.730

14.620

-

-

-

-

-

-

-

17.40

7.00

19.10

8.20

8.80

21.90

10.00

23.20

10.50

25.90

11.80

27.30

10.30

11.70

12.30

13.60

14.60

16.20

18.40

21.90

25.70

28.50

33.70

39.00

46.40

52.30

56.40

64.10

56.90

62.10

86.20

135.10

189.00

259.50

288.60

331.90

404.30

E IO SDIM NS N

A B C D E F M F-CL

-

3.99

-

3.99

4.22

-

4.22

-

4.53

-

4.53

-

4.95

4.95

5.27

5.27

5.54

5.54

6.16

6.42

6.96

7.44

7.84

8.35

9.06

9.59

10.36

11.05

11.68

12.56

14.26

16.35

20.78

25.23

27.16

30.65

34.82

3.97

-

4.35

-

-

4.57

-

4.57

-

4.89

-

4.89

-

-

-

-

-

-

-

-

-

-

-

-

-

-

8.75

8.75

8.75

8.75

10.00

10.00

10.00

10.50

10.50

10.50

11.00

3.01

3.01

3.01

3.01

3.01

3.01

3.01

3.01

3.01

3.01

3.01

3.01

3.01

3.01

3.01

3.01

3.01

3.01

3.01

3.01

3.01

3.01

3.01

3.01

3.01

3.01

3.01

3.01

3.01

3.01

3.01

3.01

3.01

3.01

3.01

3.01

3.01

4.13

1.75

4.13

1.75

1.75

4.13

1.75

4.13

1.75

4.33

1.75

4.33

2.00

2.00

2.00

2.00

2.00

2.00

2.00

2.00

2.50

2.50

2.50

2.50

2.50

2.50

2.50

2.50

2.50

2.50

3.00

3.00

3.00

3.50

3.50

3.50

4.00

0.80

-

0.80

-

-

0.80

-

0.80

-

1.00

-

1.00

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

3.33

3.33

3.33

3.33

3.33

3.33

3.33

3.33

3.33

3.33

3.33

3.33

3.33

3.33

3.33

3.33

3.33

3.33

3.33

3.33

3.33

3.33

3.33

3.33

3.33

3.33

3.33

3.33

3.33

3.33

3.33

3.33

3.33

3.33

3.33

3.33

3.33

0.00

1.59

0.00

1.58

1.58

0.00

1.58

0.00

1.58

0.00

1.58

0.00

1.33

1.33

1.33

1.33

1.33

1.33

1.33

1.33

0.83

0.83

0.83

0.83

0.83

0.83

0.83

0.83

0.83

0.83

0.33

0.33

0.33

0.17

0.17

0.17

0.67

1.67

1.67

1.67

1.67

1.67

1.67

1.67

1.67

1.67

1.67

1.67

1.67

1.67

1.67

1.67

1.67

1.67

1.67

1.67

1.67

1.67

1.67

1.67

1.67

1.67

1.67

1.67

1.67

1.67

1.67

1.67

1.67

1.67

1.67

1.67

1.67

1.67

1

1/2

1

1/2

1/2

1

1/2

1

1/2

1

1/2

1

7/8

7/8

7/8

7/8

7/8

7/8

7/8

7/8

1 3/16

1 3/16

1 3/16

1 3/16

1 3/16

1 3/16

1 3/16

1 3/16

1 3/16

1 3/16

1 7/16

1 7/16

1 7/16

1 15/16

1 15/16

1 15/16

2 7/16

2 15/16

2 11/16

3 3/16

2 11/16

2 11/16

3 7/16

2 11/16

3 7/16

2 11/16

3 1/2

2 11/16

3 1/2

3 1/4

3 1/4

3 1/4

3 1/4

3 1/4

3 1/4

3 1/4

3 1/4

3 15/16

3 15/16

3 15/16

3 15/16

3 15/16

3 15/16

3 15/16

3 15/16

3 15/16

3 15/16

4 7/16

4 7/16

4 7/16

4 15/16

4 15/16

4 15/16

5

O.D.

E MF

BA

D

P.D.

F.D.

TYPE - DF

FE M

A

D

B

O.D.

P.D.

TYPE - C

ME DA

O.D.

F

C

P.D.

F.D.

TYPE - AFTYPE - 6F

O.D.

E MF

BA

D

P.D.

TYPE - D



G-74


W

CBO.D.

P.D.

F.D.

0.393

STEEL



T ETE HBUSHING ETYP

DIAMETERS


B RO E

28-14MX-90-PB-1/12

29-14MX-90-PB-1/12

30-14MX-90-PB-1/12

31-14MX-90-PB-1/12

32-14MX-90-PB-1/12

33-14MX-90-PB-1/12

34-14MX-90-PB-1/12

35-14MX-90-TL-3020

35-14MX-90-PB-1/12

36-14MX-90-TL-3020

36-14MX-90-PB-1/12

37-14MX-90-TL-3020

37-14MX-90-PB-1/12

38-14MX-90-TL-3020

38-14MX-90-PB-1/12

39-14MX-90-TL-3020

39-14MX-90-PB-1/12

40-14MX-90-TL-3020

40-14MX-90-PB-1/12

43-14MX-90-TL-3525

45-14MX-90-TL-3525

48-14MX-90-TL-3525

50-14MX-90-TL-3525

53-14MX-90-TL-3525

56-14MX-90-TL-4030

60-14MX-90-TL-4030

63-14MX-90-TL-4030

67-14MX-90-TL-4030

71-14MX-90-TL-4030

75-14MX-90-TL-4030

80-14MX-90-TL-4030

90-14MX-90-TL-4030

112-14MX-90-TL-4030

140-14MX-90-TL-4030

168-14MX-90-TL-4030

180-14MX-90-TL-4030

200-14MX-90-TL-4030

224-14MX-90-TL-4030

28

29

30

31

32

33

34

35

35

36

36

37

37

38

38

39

39

40

40

43

45

48

50

53

56

60

63

67

71

75

80

90

112

140

168

180

200

224

MPB

MPB

MPB

MPB

MPB

MPB

MPB

3020

MPB

3020

MPB

3020

MPB

3020

MPB

3020

MPB

3020

MPB

3525

3525

3525

3525

3525

4030

4030

4030

4030

4030

4030

4030

4030

4535

5040

6050

6050

6050

6050

6F-1

6F-1

6F-1

6F-1

6F-1

6F-1

6F-1

AF-1

6F-1

AF-1

6F-1

AF-1

6F-1

AF-1

6F-1

AF-1

6F-1

AF-1

6F-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

DF-1

D-2

D-2

D-3

C-3

C-3

C-3

C-3

4.912

5.088

5.263

5.439

5.614

5.790

5.965

6.141

6.141

6.316

6.316

6.492

6.492

6.667

6.667

6.842

6.842

7.018

7.018

7.544

7.895

8.421

8.772

9.299

9.825

10.527

11.053

11.755

12.457

13.158

14.036

15.790

19.650

24.562

29.475

31.580

35.089

39.300

4.802

4.978

5.153

5.329

5.504

5.680

5.855

6.031

6.031

6.206

6.206

6.382

6.382

6.557

6.557

6.732

6.732

6.908

6.908

7.434

7.785

8.311

8.662

9.189

9.715

10.417

10.943

11.645

12.347

13.048

13.926

15.680

19.540

24.452

29.365

31.470

34.979

39.190

5.400

5.760

5.760

6.110

6.110

6.470

6.470

6.820

6.820

6.820

6.820

7.170

7.170

7.170

7.170

7.520

7.500

7.520

7.520

8.040

8.390

8.940

9.290

9.690

10.360

11.070

11.590

12.500

13.070

13.730

14.620

—

—

—

—

—

—

—

E IO SDIM NS N

A B C D E F M F-CL

—

—

—

—

—

—

—

4.95

—

4.95

—

5.27

—

5.27

—

5.54

—

5.54

—

6.16

6.42

6.96

7.44

7.83

8.35

9.06

9.59

9.88

10.67

11.63

12.56

14.26

16.35

20.74

25.11

27.06

30.29

34.46

3.97

4.35

4.35

4.57

4.57

4.89

4.89

—

5.30

—

5.30

—

5.63

—

5.63

—

5.89

—

5.89

—

—

—

—

—

—

—

—

—

—

—

10.00

10.00

10.50

11.00

15.50

15.50

15.50

15.50

3.88

3.88

3.88

3.88

3.88

3.88

3.88

3.88

3.88

3.88

3.88

3.88

3.88

3.88

3.88

3.88

3.88

3.88

3.88

3.88

3.88

3.88

3.88

3.88

3.88

3.88

3.88

3.88

3.88

3.88

3.88

—

—

—

—

—

—

—

5.14

5.00

5.00

5.00

5.00

5.20

5.20

2.00

5.20

2.00

5.20

2.00

5.20

2.00

5.20

2.00

5.20

2.00

5.20

2.50

2.50

2.50

2.50

2.50

3.00

3.00

3.00

3.00

3.00

3.00

3.00

3.00

3.50

4.00

5.00

5.00

5.00

5.00

0.94

0.80

0.80

0.80

0.80

1.00

1.00

—

1.00

—

1.00

—

1.00

—

1.00

—

1.00

—

1.00

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

4.20

4.20

4.20

4.20

4.20

4.20

4.20

4.20

4.20

4.20

4.20

4.20

4.20

4.20

4.20

4.20

4.20

4.20

4.20

4.20

4.20

4.20

4.20

4.20

4.20

4.20

4.20

4.20

4.20

4.20

4.20

4.20

4.20

4.20

4.20

4.20

4.20

4.20

0.00

0.00

0.00

0.00

0.00

0.00

0.00

2.20

0.00

2.20

0.00

2.20

0.00

2.20

0.00

2.20

0.00

2.20

0.00

1.70

1.70

1.70

1.70

1.70

1.20

1.20

1.20

1.20

1.20

1.20

1.20

1.20

0.70

0.20

0.80

0.80

0.80

0.80

2.10

2.10

2.10

2.10

2.10

2.10

2.10

2.10

2.10

2.10

2.10

2.10

2.10

2.10

2.10

2.10

2.10

2.10

2.10

2.10

2.10

2.10

2.10

2.10

2.10

2.10

2.10

2.10

2.10

2.10

2.10

2.10

2.10

2.10

2.10

2.10

2.10

2.10

1 1/2

1 1/2

1 1/2

1 1/2

1 1/2

1 1/2

1 1/2

7/8

1 1/2

7/8

1 1/2

7/8

1 1/2

7/8

1 1/2

7/8

1 1/2

7/8

1 1/2

1 3/16

1 3/16

1 3/16

1 3/16

1 3/16

1 7/16

1 7/16

1 7/16

1 7/16

1 7/16

1 7/16

1 7/16

1 7/16

1 15/16

2 7/16

4 7/16

4 7/16

4 7/16

4 7/16

2 15/16

3 3/16

3 3/16

3 7/16

3 7/16

3 1/2

3 1/2

3 1/4

3 13/16

3 1/4

3 13/16

3 1/4

4 1/8

3 1/4

4 1/8

3 1/4

4 3/8

3 1/4

4 3/8

3 15/16

3 15/16

3 15/16

3 15/16

3 15/16

4 7/16

4 7/16

4 7/16

4 7/16

4 7/16

4 7/16

4 7/16

4 7/16

4 15/16

5

6

6

6

6

20.40

22.00

23.60

25.50

27.10

30.20

31.90

12.10

34.60

13.90

36.40

14.20

39.00

16.10

41.00

16.80

43.60

18.80

45.60

20.90

24.30

28.90

31.50

37.40

43.20

52.20

59.30

71.30

81.60

95.90

94.10

94.50

173.70

245.30

395.10

429.40

493.00

562.60

O.D.

E MF

BA

D

P.D.

F.D.

TYPE - DF

FE M

A

D

B

O.D.

P.D.

TYPE - C

ME DA

O.D.

F

C

P.D.

F.D.

TYPE - AFTYPE - 6F

O.D.

E MF

BA

D

P.D.

TYPE - D



G-75


W

CBO.D.

P.D.

F.D.

0.393

STEEL


28-14MX-125-PB-1/12

29-14MX-125-PB-1/12

30-14MX-125-PB-1/12

31-14MX-125-PB-1/12

32-14MX-125-PB-1/12

33-14MX-125-PB-1/12

34-14MX-125-PB-1/12

35-14MX-125-PB-1/12

36-14MX-125-PB-1/12

37-14MX-125-PB-1/12

38-14MX-125-PB-1/12

39-14MX-125-PB-1/12

40-14MX-125-PB-1/12

43-14MX-125-PB-1/12

45-14MX-125-PB-1/12

48-14MX-125-PB-1/12

50-14MX-125-TL-4535

53-14MX-125-TL-4535

56-14MX-125-TL-4535

60-14MX-125-TL-4535

63-14MX-125-TL-4535

67-14MX-125-TL-4535

71-14MX-125-TL-5040

75-14MX-125-TL-5040

80-14MX-125-TL-5040

90-14MX-125-TL-5040

112-14MX-125-TL-6050

140-14MX-125-TL-6050

168-14MX-125-TL-7060

180-14MX-125-TL-7060

200-14MX-125-TL-7060

224-14MX-125-TL-7060

28

29

30

31

32

33

34

35

36

37

38

39

40

43

45

48

50

53

56

60

63

67

71

75

80

90

112

140

168

180

200

224

MPB

MPB

MPB

MPB

MPB

MPB

MPB

MPB

MPB

MPB

MPB

MPB

MPB

MPB

MPB

MPB

4535

4535

4535

4535

4535

4535

5040

5040

5040

5040

6050

6050

7060

7060

7060

7060

6F-1

6F-1

6F-1

6F-1

6F-1

6F-1

6F-1

6F-1

6F-1

6F-1

6F-1

6F-1

6F-1

6F-1

6F-1

6F-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

AF-1

D-1

A-1

D-3

C-3

C-3

C-3

C-3

4.912

5.088

5.263

5.439

5.614

5.790

5.965

6.141

6.316

6.492

6.667

6.842

7.018

7.544

7.895

8.421

8.772

9.299

9.825

10.527

11.053

11.755

12.457

13.158

14.036

15.790

19.650

24.562

29.475

31.580

35.089

39.300

4.802

4.978

5.153

5.329

5.504

5.680

5.855

6.031

6.206

6.382

6.557

6.732

6.908

7.434

7.785

8.311

8.662

9.189

9.715

10.417

10.943

11.645

12.347

13.048

13.926

15.680

19.540

24.452

29.365

31.470

34.979

39.190

5.400

5.760

5.760

6.110

6.110

6.470

6.470

6.820

6.820

7.170

7.170

7.520

7.520

8.040

8.400

8.940

9.290

9.690

10.360

11.070

11.590

12.500

13.070

13.730

14.620

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

7.44

7.83

8.35

9.06

9.59

9.88

10.67

11.63

12.59

14.26

16.35

20.74

25.11

27.06

30.29

34.21

3.97

4.35

4.35

4.57

4.57

4.89

4.89

5.30

5.30

5.63

5.63

5.89

5.89

6.51

6.76

7.29

—

—

—

—

—

—

—

—

—

11.00

—

15.50

17.00

17.00

17.00

17.00

5.29

5.29

5.29

5.29

5.29

5.29

5.29

5.29

5.29

5.29

5.29

5.29

5.29

5.29

5.29

5.29

5.29

5.29

5.29

5.29

5.29

5.29

5.29

5.29

5.29

—

—

—

—

—

—

—

6.50

6.50

6.50

6.50

6.50

6.69

6.69

6.69

6.69

6.69

6.69

6.69

6.69

6.81

6.81

6.81

3.50

3.50

3.50

3.50

3.50

3.50

4.00

4.00

4.00

4.00

5.00

5.00

6.00

6.00

6.00

6.00

0.89

0.89

0.89

0.89

0.89

1.08

1.08

1.08

1.08

1.08

1.08

1.08

1.08

1.20

1.20

1.20

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

5.61

5.61

5.61

5.61

5.61

5.61

5.61

5.61

5.61

5.61

5.61

5.61

5.61

5.61

5.61

5.61

5.61

5.61

5.61

5.61

5.61

5.61

5.61

5.61

5.61

5.61

5.61

5.61

5.61

5.61

5.61

5.61

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

2.11

2.11

2.11

2.11

2.11

2.11

1.61

1.61

1.61

1.61

0.61

0.61

0.39

0.39

0.39

0.39

2.81

2.81

2.81

2.81

2.81

2.81

2.81

2.81

2.81

2.81

2.81

2.81

2.81

2.81

2.81

2.81

2.81

2.81

2.81

2.81

2.81

2.81

2.81

2.81

2.81

2.81

2.81

2.81

2.81

2.81

2.81

2.81

1 1/2

1 1/2

1 1/2

1 1/2

1 1/2

1 1/2

1 1/2

1 1/2

1 1/2

1 1/2

1 1/2

1 1/2

1 1/2

1 1/2

1 1/2

1 1/2

1 15/16

1 15/16

1 15/16

1 15/16

1 15/16

1 15/16

2 7/16

2 7/16

2 7/16

2 7/16

4 7/16

4 7/16

4 15/16

4 15/16

4 15/16

4 15/16

2 15/16

3 3/16

3 3/16

3 7/16

3 7/16

3 1/2

3 1/2

3 13/16

3 13/16

4 1/8

4 1/8

4 3/8

4 3/8

4 13/16

5

5 5/8

4 15/16

4 15/16

4 15/16

4 15/16

4 15/16

4 15/16

5

5

5

5

6

6

7

7

7

7

24.80

27.20

29.20

31.60

33.80

37.30

39.60

42.90

45.30

48.50

51.10

54.30

57.00

68.20

75.00

86.30

38.00

46.00

53.60

64.30

72.80

88.20

103.00

117.00

136.00

135.00

317.00

373.00

524.00

567.00

648.00

753.00

ME D

AO.D.

F

P.D.

TYPE - A

FE M

A

D

B

O.D.

P.D.

TYPE - C

ME DA

O.D.

F

C

P.D.

F.D.

TYPE - AFTYPE - 6F

O.D.

E MF

BA

D

P.D.

TYPE - D



G-76



T ETE HBUSHING ETYP

DIAMETERS


B RO E E IO SDIM NS N

A B C D E F M F-CL

W

CBO.D.

P.D.

F.D.

0.393

STEEL



T ETE HSHINGBU ETYP

E EDIAM T RS

P.D. DO. . F.D.WE GHTI

28-14MS-20-QD-SK

30-14MS-20-QD-SK

32-14MS-20-QD-SK

34-14MS-20-QD-SK

36-14MS-20-QD-SF

38-14MS-20-QD-SF

40-14MS-20-QD-SF

43-14MS-20-QD-E

45-14MS-20-QD-E

48-14MS-20-QD-E

50-14MS-20-QD-E

56-14MS-20-QD-E

60-14MS-20-QD-E

63-14MS-20-QD-E

71-14MS-20-QD-E

75-14MS-20-QD-E

80-14MS-20-QD-E

90-14MS-20-QD-E

112-14MS-20-QD-E

140-14MS-20-QD-E

168-14MS-20-QD-F

180-14MS-20-QD-F

200-14MS-20-QD-F

224-14MS-20-QD-F

28

30

32

34

36

38

40

43

45

48

50

56

60

63

71

75

80

90

112

140

168

180

200

224

SK

SK

SK

SK

AF

AF

AF

E

E

E

E

E

E

E

E

E

E

E

E

E

F

F

F

F

DF-1

DF-1

DF-1

DF-1

DF-1

DF-1

DF-1

CF-1

CF-1

CF-1

CF-1

CF-1

CF-1

CF-1

CF-2

CF-2

GF-3

G-3

G-3

G-3

G-3

G-3

G-3

G-3

4.912

5.263

5.614

5.965

6.316

6.667

7.018

7.544

7.895

8.421

8.772

9.825

10.527

11.053

12.457

13.158

14.036

15.790

19.650

24.562

29.475

31.580

35.089

39.300

4.802

5.153

5.504

5.855

6.602

6.557

6.908

7.434

7.785

8.311

8.662

9.715

10.417

10.943

12.346

13.048

13.926

15.680

19.540

24.452

29.365

31.470

34.979

39.190

5.438

5.750

6.125

6.844

7.188

7.531

7.531

8.406

8.406

9.313

9.719

10.375

11.781

11.781

13.094

13.750

14.656

-

-

-

-

-

-

-

A

E IO SDIM NS N

B C D E F K ML

-

-

-

-

-

-

-

-

-

-

-

-

-

-

10.38

11.28

11.88

13.75

17.50

22.44

-

29.38

32.88

37.13

-

-

-

-

-

-

-

6.50

6.84

7.25

7.50

7.50

7.50

7.50

7.50

7.50

7.50

7.50

7.50

7.50

7.75

7.25

7.25

7.25

1.05

1.05

1.05

1.05

1.05

1.05

1.05

1.05

1.05

1.05

1.05

1.05

1.05

1.05

1.05

1.05

1.05

-

-

-

-

-

-

-

1.38

1.38

1.38

1.38

1.38

1.38

1.38

1.63

1.63

1.63

1.63

1.63

1.63

1.63

1.63

1.63

1.63

1.63

1.63

1.63

2.50

2.50

2.50

2.50

0.88

0.88

0.88

0.88

0.94

0.94

0.94

1.19

1.19

1.19

1.19

1.19

1.19

1.19

1.19

1.19

1.16

1.47

1.47

1.47

1.97

2.53

1.66

2.53

1.38

1.38

1.38

1.38

1.38

1.38

1.38

1.38

1.38

1.38

1.38

1.38

1.38

1.38

1.38

1.38

1.38

1.38

1.38

1.38

1.38

1.38

1.38

1.38

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.25

0.25

0.25

0.63

1.13

0.25

1.13

1.94

1.94

1.94

1.94

2.06

2.06

2.06

2.75

2.75

2.75

2.75

2.75

2.75

2.75

2.75

2.75

2.75

2.75

2.75

2.75

3.75

3.75

3.75

3.75

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.25

0.25

0.25

0.25

0.25

0.25

0.25

0.25

0.25

0.25

0.00

0.00

0.00

0.56

0.00

0.88

0.00

T CS O K MAX.

BORE

1/2

1/2

1/2

1/2

1/2

1/2

1/2

7/8

7/8

7/8

7/8

7/8

7/8

7/8

7/8

7/8

7/8

7/8

7/8

7/8

1

1

1

1

2 5/8

2 5/8

2 5/8

2 5/8

2 15/16

2 15/16

2 15/16

3 1/2

3 1/2

3 1/2

3 1/2

3 1/2

3 1/2

3 1/2

3 1/2

3 1/2

3 1/2

3 1/2

3 1/2

3 1/2

4

4

4

4

3.90

4.80

5.90

6.90

7.60

8.80

10.10

10.00

11.50

13.80

15.40

20.70

24.60

27.70

30.60

36.00

32.00

40.20

50.40

66.10

93.00

108.00

119.00

151.00

TYPE - CF

P.D.

B

F

D

LA

E

O.D.

K

M

F.D.

C

P.D.

B

F

D

LA

E

O.D.

K

M

TYPE - DF

F.D.

C

TYPE - GF

P.D.

B

F

D

LA

E

O.D.

K

M

F.D.

C

P.D.

B

F

D

LA

E

O.D.

K

M

TYPE - G



G-77


STEEL



T ETE HSHINGBU ETYP

E EDIAM T RS


BORE

28-14MS-37-QD-SK

30-14MS-37-QD-SK

32-14MS-37-QD-SK

34-14MS-37-PB-1

36-14MS-37-QD-SF

38-14MS-37-QD-SF

40-14MS-37-QD-SF

43-14MS-37-QD-E

45-14MS-37-QD-E

48-14MS-37-QD-E

50-14MS-37-QD-E

56-14MS-37-QD-E

60-14MS-37-QD-E

63-14MS-37-QD-F

71-14MS-37-QD-F

75-14MS-37-QD-F

80-14MS-37-QD-F

90-14MS-37-QD-F

112-14MS-37-QD-F

140-14MS-37-QD-J

168-14MS-37-QD-J

180-14MS-37-QD-J

200-14MS-37-QD-J

224-14MS-37-QD-M

28

30

32

34

36

38

40

43

45

48

50

56

60

63

71

75

80

90

112

140

168

180

200

224

SK

SK

SK

MPB

SF

SF

SF

E

E

E

E

E

E

F

F

F

F

F

F

J

J

J

J

M

EF-1

DF-1

DF-1

FF-1

DF-1

DF-1

DF-1

DF-1

DF-1

DF-1

DF-1

DF-1

DF-1

CF-1

CF-2

CF-2

CF-2

G-3

G-3

G-3

G-3

G-3

G-3

G-3

4.912

5.263

5.614

5.965

6.316

6.667

7.018

7.544

7.895

8.421

8.772

9.825

10.527

11.053

12.457

13.158

14.036

15.790

19.650

24.562

29.475

31.580

35.089

39.300

4.802

5.153

5.504

5.855

6.602

6.557

6.908

7.434

7.785

8.311

8.662

9.715

10.417

10.943

12.346

13.048

13.926

15.680

19.540

24.452

29.365

31.470

34.979

39.190

5.438

5.750

6.125

6.844

7.188

7.531

7.531

8.406

8.406

9.313

9.719

10.375

11.781

11.781

13.094

13.750

14.656

-

-

-

-

-

-

-

A

E IO SDIM NS N

B C D E F K ML

3.50

4.06

4.19

3.88

4.94

5.13

5.50

6.16

6.38

6.88

7.38

8.19

8.88

0.00

10.31

11.00

11.88

13.75

17.50

22.38

27.47

29.38

32.88

37.38

-

-

-

4.88

-

-

-

-

-

-

-

-

-

7.13

7.13

7.13

7.13

7.00

7.19

8.25

9.00

8.63

8.63

10.25

1.75

1.75

1.75

1.75

1.75

1.75

1.75

1.75

1.75

1.75

1.75

1.75

1.75

1.75

1.75

1.75

1.75

-

-

-

-

-

-

-

1.25

1.25

1.25

-

1.25

1.25

1.25

1.63

1.63

1.63

1.63

1.63

1.63

2.50

2.50

2.50

2.50

2.50

2.50

3.19

3.19

3.19

3.19

3.31

0.81

0.31

0.31

1.00

0.38

0.38

0.38

0.94

0.94

0.94

0.94

0.94

0.94

1.38

1.38

1.38

1.38

1.81

1.81

2.69

2.16

2.69

1.88

3.31

2.06

2.06

2.06

2.06

2.06

2.06

2.06

2.06

2.06

2.06

2.06

2.06

2.06

2.06

2.06

2.06

2.06

2.06

2.06

2.06

2.06

2.06

2.06

2.13

0.00

0.56

0.56

-

0.56

0.56

0.56

0.25

0.25

0.25

0.25

0.25

0.25

0.00

0.00

0.00

0.00

0.44

0.44

1.13

0.59

1.13

0.31

1.59

1.94

1.94

1.94

2.56

2.06

2.06

2.06

2.75

2.75

2.75

2.75

2.75

2.75

3.75

3.75

3.75

3.75

3.75

3.75

4.63

4.63

4.63

4.63

6.75

0.81

0.25

0.25

0.50

0.25

0.25

0.25

0.19

0.19

0.19

0.19

0.19

0.19

0.44

0.44

0.44

0.44

0.00

0.00

0.00

0.53

0.00

0.81

1.47

1/2

1/2

1/2

1

1/2

1/2

1/2

7/8

7/8

7/8

7/8

7/8

7/8

1

1

1

1

1

1

1 1/2

1 1/2

1 1/2

1 1/2

2

2 5/8

2 5/8

2 5/8

3 1/2

2 15/16

2 15/16

2 15/16

3 1/2

3 1/2

3 1/2

3 1/2

3 1/2

3 1/2

4

4

4

4

4

4

4 1/2

4 1/2

4 1/2

4 1/2

5 1/2

5.10

5.90

7.20

16.60

8.00

10.50

12.70

14.30

16.20

19.10

21.70

28.20

33.40

39.40

44.70

49.10

54.20

50.20

65.40

101.00

157.00

143.00

186.00

230.00

TYPE - CF

P.D.

B

F

D

LA

E

O.D.

K

M

F.D.

C

P.D.

B

F

D

LA

E

O.D.

K

M

TYPE - DF

F.D.

C

TYPE - EF

C

P.D.

B

L

A

E

O.D.

KDMF

F.D. P.D.

B

F

D

LA

E

O.D.

K

M

TYPE - GTYPE - FF

P.D.

BA

E

O.D.

F

M L

C

F.D.



G-78


STEEL



T ETE HSHINGBU ETYP

E EDIAM T RS


BORE

28-14MS-68-PB-1

30-14MS-68-PB-1

32-14MS-68-PB-1

34-14MS-68-PB-1

36-14MS-68-PB-1

38-14MS-68-PB-1

40-14MS-68-PB-1

43-14MS-68-QD-E

45-14MS-68-QD-E

48-14MS-68-QD-E

50-14MS-68-QD-F

56-14MS-68-QD-F

60-14MS-68-QD-J

63-14MS-68-QD-J

71-14MS-68-QD-J

75-14MS-68-QD-J

80-14MS-68-QD-J

90-14MS-68-QD-J

112-14MS-68-QD-J

140-14MS-68-QD-M

168-14MS-68-QD-M

180-14MS-68-QD-M

200-14MS-68-QD-M

224-14MS-68-QD-N

28

30

32

34

36

38

40

43

45

48

50

56

60

63

71

75

80

90

112

140

168

180

200

224

MPB

MPB

MPB

MPB

MPB

MPB

MPB

E

E

E

F

F

J

J

J

J

J

J

J

M

M

M

M

N

FF-1

FF-1

FF-1

FF-1

FF-1

FF-1

FF-1

DF-1

DF-1

DF-1

DF-1

DF-1

DF-1

DF-1

DF-2

DF-2

DF-2

D-3

D-3

G-3

G-3

G-3

G-3

G-3

4.912

5.263

5.614

5.965

6.316

6.667

7.018

7.544

7.895

8.421

8.772

9.825

10.527

11.053

12.457

13.158

14.036

15.790

19.650

24.562

29.475

31.580

35.089

39.300

4.802

5.153

5.504

5.855

6.602

6.557

6.908

7.434

7.785

8.311

8.662

9.715

10.417

10.943

12.346

13.048

13.926

15.680

19.540

24.452

29.365

31.470

34.979

39.190

5.438

5.750

6.125

6.844

7.188

7.531

7.531

8.406

8.406

9.313

9.719

10.375

11.781

11.781

13.094

13.750

14.656

-

-

-

-

-

-

-

A

E IO SDIM NS N

B C D E F K ML

3.31

3.56

3.81

3.88

4.31

4.63

4.88

6.16

6.38

6.88

7.38

8.19

8.25

8.25

10.50

11.25

12.13

13.75

17.50

22.38

27.28

29.38

32.88

37.13

3.97

4.34

4.56

4.88

5.31

5.63

5.88

-

-

-

-

-

-

-

8.50

8.50

8.50

8.25

8.50

10.25

11.38

10.50

10.50

11.50

3.02

3.02

3.02

3.02

3.02

3.02

3.02

3.02

3.02

3.02

3.02

3.02

3.02

3.02

3.02

3.02

3.02

-

-

-

-

-

-

-

-

-

-

-

-

-

-

1.63

1.63

1.63

2.50

2.50

3.19

3.19

3.19

3.19

3.19

3.19

3.19

5.19

5.19

5.19

5.19

6.25

0.91

0.91

0.91

0.97

0.97

0.97

0.97

0.19

0.19

0.19

0.88

0.88

1.47

1.47

1.47

1.47

1.47

1.47

1.44

3.56

3.06

3.56

2.25

2.84

3.34

3.34

3.34

3.34

3.34

3.34

3.34

3.34

3.34

3.34

3.34

3.34

3.34

3.34

3.34

3.34

3.34

3.34

3.34

3.34

3.34

3.34

3.34

3.34

-

-

-

-

-

-

-

1.00

1.00

1.00

0.53

0.53

0.09

0.09

0.09

0.09

0.09

0.09

0.16

1.84

1.34

1.84

0.56

0.84

2.56

2.56

2.56

2.56

2.56

2.56

2.56

2.75

2.75

2.75

3.75

3.75

4.63

4.63

4.63

4.63

4.63

4.63

4.63

6.75

6.75

6.75

6.75

8.13

1.69

1.69

1.69

1.75

1.75

1.75

1.75

0.72

0.72

0.72

0.31

0.31

0.06

0.06

0.06

0.06

0.06

0.06

0.00

0.00

0.50

0.00

1.34

2.09

1

1

1

1

1

1

1

7/8

7/8

7/8

1

1

1 1/2

1 1/2

1 1/2

1 1/2

1 1/2

1 1/2

1 1/2

2

2

2

2

2 7/8

2 15/16

3 3/16

3 7/16

3 1/2

3 13/16

4 1/8

4 3/8

3 1/2

3 1/2

3 1/2

4

4

4 1/2

4 1/2

4 1/2

4 1/2

4 1/2

4 1/2

4 1/2

5 1/2

5 1/2

5 1/2

5 1/2

5 7/8

13.40

15.70

18.00

21.10

23.50

26.20

29.10

17.80

20.80

26.20

30.40

41.50

53.30

60.80

64.70

69.60

80.40

72.60

92.70

177.00

251.00

240.00

263.00

350.00

P.D.

B

F

D

LA

E

O.D.

K

M

TYPE - DF

F.D.

C

P.D.

B

F

D

LA

E

O.D.

K

M

TYPE - D

P.D.

B

F

D

LA

E

O.D.

K

M

TYPE - GTYPE - FF

P.D.

BA

E

O.D.

F

M L

C

F.D.



G-79


STEEL



T ETE HSHINGBU ETYP

E EDIAM T RS


BORE

28-14MS-90-PB-1

30-14MS-90-PB-1

32-14MS-90-PB-1

34-14MS-90-PB-1

36-14MS-90-PB-1

38-14MS-90-PB-1

40-14MS-90-PB-1

43-14MS-90-QD-F

45-14MS-90-QD-F

48-14MS-90-QD-F

50-14MS-90-QD-F

56-14MS-90-QD-J

60-14MS-90-QD-J

63-14MS-90-QD-J

71-14MS-90-QD-J

75-14MS-90-QD-J

80-14MS-90-QD-M

90-14MS-90-QD-M

112-14MS-90-QD-M

140-14MS-90-QD-M

168-14MS-90-QD-N

180-14MS-90-QD-N

200-14MS-90-QD-N

224-14MS-90-QD-N

28

30

32

34

36

38

40

43

45

48

50

56

60

63

71

75

80

90

112

140

168

180

200

224

MPB

MPB

MPB

MPB

MPB

MPB

MPB

F

F

F

F

J

J

J

J

J

M

M

M

M

N

N

N

N

FF-1

FF-1

FF-1

FF-1

FF-1

FF-1

FF-1

EF-1

EF-1

EF-1

AF-1

DF-1

DF-1

DF-1

DF-1

DF-1

GF-1

G-2

G-3

G-3

G-3

G-3

G-3

G-3

4.912

5.263

5.614

5.965

6.316

6.667

7.018

7.544

7.895

8.421

8.772

9.825

10.527

11.053

12.457

13.158

14.036

15.790

19.650

24.562

29.475

31.580

35.089

39.300

4.802

5.153

5.504

5.855

6.602

6.557

6.908

7.434

7.785

8.311

8.662

9.715

10.417

10.943

12.346

13.048

13.926

15.680

19.540

24.452

29.365

31.470

34.979

39.190

5.438

5.750

6.125

6.844

7.188

7.531

7.531

8.406

8.406

9.313

9.719

10.375

11.781

11.781

13.094

13.750

14.656

-

-

-

-

-

-

-

A

E IO SDIM NS N

B C D E F K ML

3.31

3.56

3.81

3.88

4.31

4.63

4.88

5.63

5.97

6.47

6.78

8.19

8.88

8.88

10.00

10.66

-

13.69

17.47

22.34

27.16

29.28

32.75

36.94

3.97

4.34

4.56

4.88

5.31

5.63

5.88

-

-

-

-

-

-

-

-

-

11.38

10.00

11.38

11.38

12.00

11.25

11.50

12.00

3.88

3.88

3.88

3.88

3.88

3.88

3.88

3.88

3.88

3.88

3.88

3.88

3.88

3.88

3.88

3.88

3.88

-

-

-

-

-

-

-

-

-

-

-

-

-

-

2.50

2.50

2.50

2.50

3.19

3.19

3.19

3.19

3.19

5.19

5.19

5.19

5.19

6.25

6.25

6.25

6.25

0.78

0.78

0.78

0.97

0.97

0.97

0.97

1.72

1.72

1.72

0.16

1.06

1.06

1.06

1.06

1.06

2.69

2.69

2.69

2.69

4.06

4.06

4.06

4.06

4.22

4.22

4.22

4.22

4.22

4.22

4.22

4.22

4.22

4.22

4.22

4.22

4.22

4.22

4.22

4.22

4.22

4.22

4.22

4.22

4.22

4.22

4.22

4.22

-

-

-

-

-

-

-

0.00

0.00

0.00

1.50

0.50

0.50

0.50

0.50

0.50

0.97

0.97

0.97

0.97

2.03

2.03

2.03

2.03

3.56

3.56

3.56

3.56

3.56

3.56

3.56

3.75

3.75

3.75

3.75

4.63

4.63

4.63

4.63

4.63

6.75

6.75

6.75

6.75

8.13

8.13

8.13

8.13

1.44

1.44

1.44

1.63

1.63

1.63

1.63

1.38

1.38

1.38

0.19

0.50

0.50

0.50

0.50

0.50

-

-

-

-

-

-

-

-

1

1

1

1

1

1

1

1

1

1

1

1 1/2

1 1/2

1 1/2

1 1/2

1 1/2

2

2

2

2

2 7/16

2 7/16

2 7/16

2 7/16

2 15/16

3 3/16

3 7/16

3 1/2

3 13/16

4 1/8

4 3/8

4

4

4

4

4 1/2

4 1/2

4 1/2

4 1/2

4 1/2

5 1/2

5 1/2

5 1/2

5 1/2

5 7/8

5 7/8

5 7/8

5 7/8

17.30

20.20

23.10

27.10

30.30

33.90

37.70

24.90

29.20

36.30

36.50

48.20

57.70

67.20

90.50

105.40

121.50

130.90

187.90

239.90

327.30

298.50

344.50

406.30

B

F

D M

LA

E

O.D.

K

F.D.

C

P.D.

TYPE - AF

P.D.

B

F

D

LA

E

O.D.

K

M

TYPE - DF

F.D.

C

TYPE - EF

C

P.D.

B

L

A

E

O.D.

KDMF

F.D.

TYPE - FF

P.D.

BA

E

O.D.

F

M L

C

F.D.

TYPE - GF

P.D.

B

F

D

LA

E

O.D.

K

M

F.D.

C

P.D.

B

F

D

LA

E

O.D.

K

M

TYPE - G



G-80


STEEL


P.D.

B

F

D

LA

E

O.D.

K

M

TYPE - D

P.D.

B

F

D

LA

E

O.D.

K

M

TYPE - GTYPE - FF

P.D.

BA

E

O.D.

F

M L

C

F.D.P.D.

B

F

D

LA

E

O.D.

K

M

TYPE - DF

F.D.

C


G-81


T ETE HSHINGBU ETYP

E EDIAM T RS

P.D. DO. . DF. . STOCK MAX.WE GHTI

BORE

28-14MS-125-PB-1

30-14MS-125-PB-1

32-14MS-125-PB-1

34-14MS-125-PB-1

36-14MS-125-PB-1

38-14MS-125-PB-1

40-14MS-125-PB-1

43-14MS-125-PB-1

45-14MS-125-PB-1

48-14MS-125-PB-1

50-14MS-125-QD-J

56-14MS-125-QD-J

60-14MS-125-QD-J

63-14MS-125-QD-M

71-14MS-125-QD-M

75-14MS-125-QD-M

80-14MS-125-QD-M

90-14MS-125-QD-M

112-14MS-125-QD-N

140-14MS-125-QD-N

168-14MS-125-QD-N

180-14MS-125-QD-N

200-14MS-125-QD-N

224-14MS-125-QD-P

28

30

32

34

36

38

40

43

45

48

50

56

60

63

71

75

80

90

112

140

168

180

200

224

MPB

MPB

MPB

MPB

MPB

MPB

MPB

MPB

MPB

MPB

J

J

J

M

M

M

M

M

N

N

N

N

N

P

FF-1

FF-1

FF-1

FF-1

FF-1

FF-1

FF-1

FF-1

FF-1

FF-1

DF-1

DF-1

DF-1

DF-1

DF-1

DF-1

DF-1

D-2

G-3

G-3

G-3

G-3

G-3

G-3

4.912

5.263

5.614

5.965

6.316

6.667

7.018

7.544

7.895

8.421

8.772

9.825

10.527

11.053

12.457

13.158

14.036

15.790

19.650

24.562

29.475

31.580

35.089

39.300

4.802

5.153

5.504

5.855

6.602

6.557

6.908

7.434

7.785

8.311

8.662

9.715

10.417

10.943

12.346

13.048

13.926

15.680

19.540

24.452

29.365

31.470

34.979

39.190

5.438

5.750

6.125

6.844

7.188

7.531

7.531

8.406

8.406

9.313

9.719

10.375

11.781

11.781

13.094

13.750

14.656

-

-

-

-

-

-

-

A

E IO SDIM NS N

B C D E F K ML

3.31

3.56

3.81

3.88

4.31

4.63

4.88

5.31

5.50

6.13

7.44

8.16

8.88

9.22

10.00

10.00

10.00

13.66

17.66

22.56

27.16

25.56

32.94

37.13

3.97

4.34

4.56

4.88

5.31

5.63

5.88

6.50

6.75

7.28

-

-

-

-

-

-

-

10.00

11.25

11.50

12.00

11.25

11.25

13.50

5.28

5.28

5.28

5.28

5.28

5.28

5.28

5.28

5.28

5.28

5.28

5.28

5.28

5.28

5.28

5.28

5.28

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

3.19

3.19

3.19

5.19

5.19

5.19

5.19

5.19

6.25

6.25

6.25

6.25

6.25

7.25

0.88

0.88

0.88

1.06

1.06

1.06

1.06

1.19

1.19

1.19

0.28

0.28

0.28

1.28

1.28

1.28

1.28

1.28

2.66

2.66

2.66

2.66

2.66

2.81

5.63

5.63

5.63

5.63

5.63

5.63

5.63

5.63

5.63

5.63

5.63

5.63

5.63

5.63

5.63

5.63

5.63

5.63

5.63

5.63

5.63

5.63

5.63

5.63

-

-

-

-

-

-

-

-

-

-

1.28

1.28

1.28

0.41

0.41

0.41

0.41

0.44

0.63

0.63

0.63

0.63

0.63

0.53

4.19

4.19

4.19

4.19

4.19

4.19

4.19

4.19

4.19

4.19

4.63

4.63

4.63

6.75

6.75

6.75

6.75

6.75

8.13

8.13

8.13

8.13

8.13

9.38

2.31

2.31

2.31

2.50

2.50

2.50

2.50

2.63

2.63

2.63

0.13

0.13

0.13

-

-

-

-

-

-

-

-

-

-

1.09

1

1

1

1

1

1

1

1

1

1

1 1/2

1 1/2

1 1/2

2

2

2

2

2

2 7/16

2 7/16

2 7/16

2 7/16

2 7/16

2 15/16

2 15/16

3 3/16

3 7/16

3 1/2

3 13/16

4 1/8

4 3/8

4 13/16

5

5 5/8

4 1/2

4 1/2

4 1/2

5 1/2

5 1/2

5 1/2

5 1/2

5 1/2

5 7/8

5 7/8

5 7/8

5 7/8

5 7/8

7

21.70

25.40

29.10

34.20

38.00

42.40

47.10

55.40

61.20

68.60

38.80

55.80

65.50

83.40

119.70

139.70

166.80

146.00

210.60

270.30

365.20

329.60

373.50

482.30



Timing Belt Drive Catalog [Powerdrive.com]

Documents

Transcript of Timing Belt Drive Catalog [Powerdrive.com]