TimberTech Anti Slip Strip Fixing Detail...blade drill bit. Strips to be screw fixed (8N per strip)...

1
Sheet 1 of 1 Data Sheet N° 106 TimberTech Anti Slip Strip Fixing Detail © © Copyright Greensquares Products Ltd 2013 GRIT STRIPS FIXED PARALLEL TO DECK BOARDS. GRIT STRIPS FIXED PERPENDICULAR TO DECK BOARDS. Strip dimensions - 1000mm x 50mm x 2mm thick. Strips to be secured using M4.2 x 20mm Pozi countersunk A2 stainless steel self tapping screws with 8g stainless steel cup washers. Pilot hole to be drilled through grit strip into decking using 3mm Bosch multipurpose blade drill bit. Strips to be screw fixed (8N° per strip) at minimum centres indicated below. Avoid screw fixing directly over butt joints in decking.

Transcript of TimberTech Anti Slip Strip Fixing Detail...blade drill bit. Strips to be screw fixed (8N per strip)...

Page 1: TimberTech Anti Slip Strip Fixing Detail...blade drill bit. Strips to be screw fixed (8N per strip) at minimum centres indicated below. Avoid screw fixing directly over butt joints

Sheet 1 of 1

Data Sheet N° 106TimberTech Anti Slip Strip Fixing Detail

©© Copyright Greensquares Products Ltd 2013

GRIT STRIPS FIXED PARALLEL TO DECK BOARDS.

GRIT STRIPS FIXED PERPENDICULAR TO DECK BOARDS.

Strip dimensions - 1000mm x 50mm x 2mm thick.

Strips to be secured using M4.2 x 20mm Pozi countersunk A2 stainless steel self tapping screws with 8g stainless steel cup washers.

Pilot hole to be drilled through grit strip into decking using 3mm Bosch multipurpose blade drill bit.

Strips to be screw fixed (8N° per strip) at minimum centres indicated below.

Avoid screw fixing directly over butt joints in decking.