Timber Engineering SolutionsTimber Engineering Solutions for a survey call or click 0800 99 11 00...

2
Timber Engineering Solutions for a survey call or click 0800 99 11 00 www.timberwise.co.uk The Problem When Dry Rot or Wet Rot occurs in timber beam or truss ends it usually requires extensive opening up and destructive works to replace the timber or “bolt on” unsightly steel plates or side-splice. Timberwise prides itself on being at the forefront of timber technology and have, with a number of resin manufacturers, helped develop a range of resins suitable for almost any eventuality. The replacing of timbers is a highly skilled job requiring expert knowledge of timber replacement. Repairs often require the removal of ceilings and floorboards and the formation of new wall sockets to allow for side splicing Some repairs will need to be carried out in restricted areas or involve reinforcing weak joints or making good stress cracks Specifications may require that the aesthetic features of the original timber are retained The Solution Timberwise have fully trained and experienced Surveyors who have a range of solutions at their disposal to solve your problem. Our Surveyors will recommend the most suitable solution for your property as well as providing a written report for the work to be carried out. Defects can be repaired economically and in-situ using a variety of specially formulated resins, coupled with innovative application techniques. The use of resins include:- An effective, permanent and virtually unaltered finish to plain or ornate timbers The insertion of unseen steel or fibre reinforcement bars • Pouring resin into shuttering to match existing timbers Graining and staining of the resin to match existing timbers • Making good cracks with special grouting resins Increasing the load bearing capacity of existing timber beams

Transcript of Timber Engineering SolutionsTimber Engineering Solutions for a survey call or click 0800 99 11 00...

Page 1: Timber Engineering SolutionsTimber Engineering Solutions for a survey call or click 0800 99 11 00 The Problem When Dry Rot or Wet Rot occurs in timber beam or truss ends it usually

Timber Engineering Solutions

for a survey call or click 0800 99 11 00

www.timberwise.co.uk

The Problem

When Dry Rot or Wet Rot occurs intimber beam or truss ends it usuallyrequires extensive opening up anddestructive works to replace the timberor “bolt on” unsightly steel plates orside-splice. Timberwise prides itself onbeing at the forefront of timbertechnology and have, with a number ofresin manufacturers, helped develop arange of resins suitable for almost anyeventuality.

The replacing of timbers is a highlyskilled job requiring expert knowledgeof timber replacement.

• Repairs often require the removal ofceilings and floorboards and theformation of new wall sockets toallow for side splicing

• Some repairs will need to be carriedout in restricted areas or involvereinforcing weak joints or makinggood stress cracks

• Specifications may require that theaesthetic features of the originaltimber are retained

The Solution

Timberwise have fully trained andexperienced Surveyors who have arange of solutions at their disposal tosolve your problem. Our Surveyors willrecommend the most suitable solutionfor your property as well as providing awritten report for the work to be carriedout. Defects can be repairedeconomically and in-situ using avariety of specially formulated resins,coupled with innovative applicationtechniques.

The use of resins include:-

• An effective, permanent and virtuallyunaltered finish to plain or ornatetimbers

• The insertion of unseen steel or fibrereinforcement bars

• Pouring resin into shuttering tomatch existing timbers

• Graining and staining of the resin tomatch existing timbers

• Making good cracks with specialgrouting resins

• Increasing the load bearing capacityof existing timber beams

Page 2: Timber Engineering SolutionsTimber Engineering Solutions for a survey call or click 0800 99 11 00 The Problem When Dry Rot or Wet Rot occurs in timber beam or truss ends it usually

Timber Engineering Solutions

Technical Information

The 5 typical stages in Timber Replacement:

Why Use Timberwise?

• Professional competence

• Approved by leading Architects / Surveyors

• Fast friendly local service nationwide

• Fully insured for Public Liability and Professional Indemnity

• Speedy, efficient and competitive

• Health & Safety approved products

• Conscientious and tidy workmanship from trustworthy tradesmen

Over the decades Timberwise have treated in excess of 200,000 properties throughout the UK.With Timberwise you can be safe in the knowledge that your property is cared for by the professionals.

Contact us on 0800 99 11 00

[email protected]

www.timberwise.co.uk

Local ServiceNational Resource

for a survey call or click 0800 99 11 00

www.timberwise.co.uk

1 2 3

4 5