Tilting Weirs KWT Tilting Weirs type: KKS-PE
2
The KKS PE is KWT’s lowcost solution for regulating water levels. The HDPE side cheeks are toothed for a rack-and-pinion operation and the tilting plate is made from stainless steel thus not requiring any additional reinforcements. This way all material properties have been optimally employed. This tilting weir is available in max 2000 mm width and can be manually operated, or by actuator with manual override. Whereas KKS in stainless steel is adequate for flood control, KKS PE is more focused on rural water level control, such as forest creeks, small streams and upstream reservoirs. Just like KKS, KKS PE enjoys the same modular structure. This weir can be fitted into the civil structure on both upstream and downstream sides. Application Specifications Materials Weir width : 500 mm to 2000 mm Weir height : 100 mm to 1200 mm Operation method : manual or by actuator Operation point : KWT- connection (half moon) Other sizes on request Tilting Weirs Side cheeks : HDPE Plate : SS 304 or SS 316 Topbridge and frame : SS 304 or SS 316 Other materials on request Operation Benefits KWT Tilting Weirs type: KKS-PE KWT Biddinghuizen - ® www.kwtgroup.nl KWT tilting weirs are used for regulating rain-, surface- and waste water. The tilting weir is a modularly assembled concept fabricated in stainless steel grade 304 or 316 and/or HDPE Less ground work, because the tilting weir runs at threshold Compact construction Easy to install Favorable price / performance Short notice delivery KWT reserves the right to modify the design without prior notification
Transcript of Tilting Weirs KWT Tilting Weirs type: KKS-PE
The KKS PE is KWT’s lowcost solution for regulating water levels. The HDPE side cheeks are toothed for a rack-and-pinion operation and the tilting plate is made from stainless steel thus not requiring any additional reinforcements. This way all material properties have been optimally employed. This tilting weir is available in max 2000 mm width and can be manually operated, or by actuator with manual override. Whereas KKS in stainless steel is adequate for flood control, KKS PE is more focused on rural water level control, such as forest creeks, small streams and upstream reservoirs.Just like KKS, KKS PE enjoys the same modular structure. This weir can be fitted into the civil structure on both upstream and downstream sides.
Application
Specifications
Materials
Weir width : 500 mm to 2000 mm
Weir height : 100 mm to 1200 mm
Operation method : manual or by actuator
Operation point : KWT- connection (half moon)
Other sizes on request
Tilting Weirs
Side cheeks : HDPE
Plate : SS 304 or SS 316
Topbridge and frame : SS 304 or SS 316
Other materials on request
Operation
Benefits
KWT Tilting Weirs type: KKS-PE
KWT Biddinghuizen -
®
www.kwtgroup.nl
KWT tilting weirs are used for regulating rain-, surface- and waste water. The tilting weir is a modularly assembled concept fabricated in stainless steel grade 304 or 316 and/or HDPE
Less ground work, because the tilting weir runs at threshold
Compact construction
Easy to install
Favorable price / performance
Short notice delivery
KWT reserves the right to modify the design without prior notification
KgNm.A BB x H C D E F G H J K
1000
1500
2000
1000
1500
2000
1000
1500
2000
1000
1500
600
600
600
800
800
800
1000
1000
1000
1200
1200
100
100
100
100
100
100
100
100
100
100
100
1000 X 600
1500 X 600
2000 X 600
1000 X 800
1500 X 800
2000 X 800
1000 X 1000
1500 X 1000
2000 X 1000
1000 X 1200
1500 X 1200
1320
1820
2320
1320
1820
2320
1320
1820
2320
1320
1820
1163
1163
1163
1363
1363
1363
1563
1563
1563
1763
1763
1063
1063
1063
1263
1263
1263
1463
1463
1463
1663
1663
931
931
931
1131
1131
1131
1331
1331
1331
1531
1531
1041
1041
1041
1241
1241
1241
1441
1441
1441
1641
1641
900
900
900
1100
1100
1100
1300
1300
1300
1500
1500
1100
1600
2100
1100
1600
2100
1100
1600
2100
1100
1600
113
113
113
145
145
145
177
177
177
209
209
30
30
30
30
30
30
30
30
30
30
30
140
170
205
165
205
245
200
240
285
235
280
2000 1200 1002000 X 1200 2320 1763 1531 1641 1500 2100 209 30 335
1663
max
DATA
Fully open; mounted downstream side
TILTING WEIRS KWT Tilting Weirs type: KKS-PE
First you choose the preferred size. To decide the clear width, you choose from colomn ’D’. When you pass these through to the sales department from KWT, you’ll get a quotation in no time.Please note also the weir side (up- or downstream) and the possibilities of the operation method. You can choose for a manual operation weir, but also for a weir that is prepared for an actuator.
a -
Lifting hooks
b -
Half moon connector
c -
Top member
d -
Drive chain
e -
Seal
f -
Side cheeks
g -
Moving plate
h -
Reinforcement rib
i -
Actuator bracket
j -
Chain tensioner
k -
Frame
