Sassuolo rustic tile producer,TOE rustic tile, engineering tile promotion
Tile Over Tile - crossvillestudios.com · Can I Tile over existing ceramic tile? This is done...
2
CrossvilleInc.com ENV-TOT-15 ENVISION Can I Tile over existing ceramic tile? This is done regularly where there is not a floor height or wall thickness limitation and where the existing tile is well-bonded. To insure a good bond to the existing tile, certain procedures need to be followed; these are described in the TCNA Handbook in detail TR712 and TR713. This demo board is using Custom Building Products - MBP a multi surface bonding primer. Where to purchase and how to apply - with video, can be found at www.custombuildingproducts.com. Laminam Envision Demo Tile Over Tile Note: Not all thin-sets (nor polymer modified thin-sets) are capable of bonding directly to tile. Please consult the grout and mortar manufacturers specified for their recommended thin-sets. Also, depending on the tile already installed, in some cases the tile must be mechanically abraded to insure a good bond - this is usually best determined with a “bond test.” The thin-set used with this demo board is MegaLite, using a Euro-notch trowel on both the tile and the substrate. Caution: Appropriate safety equipment should be worn at all times. This Tile over Tile using Laminam Envision Demo can be ordered from your Crossville Distributor using code ENV-TOT-15. The list price is $50.00. ETA to stock by 2016. Weight average is 15lbs. The demo size is 12 x 19. Order this demo for your next sales visits!
Transcript of Tile Over Tile - crossvillestudios.com · Can I Tile over existing ceramic tile? This is done...
CrossvilleInc.com
ENV-TOT-15
ENVISION
Can I Tile over existing ceramic tile?
This is done regularly where there is not a floor height or wall thickness limitation and where the existing tile is well-bonded. To insure a good bond to the existing tile, certain procedures need to be followed; these are described in the TCNA Handbook in detail TR712 and TR713. This demo board is using Custom Building Products - MBP a multi surface bonding primer. Where to purchase and how to apply - with video, can be found at www.custombuildingproducts.com.
Laminam Envision Demo
Tile Over Tile
Note: Not all thin-sets (nor polymer modified thin-sets) are capable of bonding directly to tile. Please consult the grout and mortar manufacturers specified for their recommended thin-sets. Also, depending on the tile already installed, in some cases the tile must be mechanically abraded to insure a good bond - this is usually best determined with a “bond test.” The thin-set used with this demo board is MegaLite, using a Euro-notch trowel on both the tile and the substrate.
Caution: Appropriate safety equipment should be worn at all times.
This Tile over Tile using Laminam Envision Demo can be ordered from your Crossville Distributor using code ENV-TOT-15. The list price is $50.00. ETA to stock by 2016. Weight average is 15lbs. The demo size is 12 x 19.
Order this demo for your next sales visits!
Laminam Envision Demo
Tile Over Tile
ENV-TOT-15 15lbs.
CustomBuildingProducts,MBP,Multi
SurfaceBondingPrimer
LaminambyCrossvilleFiloArgento3+*
Display Panels
EnvisionGroutedPanel:Virtue*
MegaLiteThin-setusingEuro-notchtrowel
Envision Panels 12 x 19
*PleaseNote:Actualpanelsmayvaryfrompictures.
