Ti_e_protegol 32-55 u 45 l Kartusche_jul 08

2

Click here to load reader

description

Coatings

Transcript of Ti_e_protegol 32-55 u 45 l Kartusche_jul 08

Page 1: Ti_e_protegol 32-55 u 45 l Kartusche_jul 08

Coating systems corrosion protection

P R O T E G O LSolvent-free, two-component polyurethane coating

application

TIB Chemicals AG | Mülheimer Straße 16 -22 | 68219 Mannheim | Phone +49 621 8901-812 | Fax +49 621 8901-

This information is given to the best of our knowledge but without obligation. We are not liable for any wrong This data sheet becomes invalid as soon as a new edition has been published.

Supplementary product to PROTEGOLand mechanical damages, pre-trowellingairless-hot spray method

Field manual for

1.

Required equipment:

• Double ram ejection gun (PROTEPRESS)

• Side by side cartuche comp

• Mixing tube (with static mixer

• Knife

Coating systems corrosion protection

P R O T E G O L® UR - coating 32-55 / 45 L

component polyurethane coating compoundapplication Side by side cartuche, 200 ml

22 | 68219 Mannheim | P.O. Box 81 02 20 | 68202 Mannheim -902 | [email protected] | www.tib-chemicals.com

This information is given to the best of our knowledge but without obligation. We are not liable for any wrong advice or any advice we may have failed to give.This data sheet becomes invalid as soon as a new edition has been published. Please contact us for latest.

1/2

Description

PROTEGOL® UR 32-55/45 L for manual application and repair

trowelling of parts with complicated design and subsequent over

Uses

manual for handling of PROTEPRESS / PROTEGOL®-cartridge

Processing of:

2.

(PROTEPRESS)

comp. A+B, 200 ml

with static mixer)

• Slice of the aluminium

• Place double cartuche

• Material temperature: stored at ambient temperature

55 / 45 L compound for manual

, 200 ml

Last update 07/2008

chemicals.com

advice or any advice we may have failed to give.

repair of defective areas of parts with complicated design and subsequent over-coating by

cartridge

aluminium outer package

he in ejection gun

aterial temperature: stored at ambient

Page 2: Ti_e_protegol 32-55 u 45 l Kartusche_jul 08

Coating systems corrosion protection

P R O T E G O LSolvent-free, two-component polyurethane coating

application

TIB Chemicals AG | Mülheimer Straße 16 -22 | 68219 Mannheim | Phone +49 621 8901-812 | Fax +49 621 8901-

This information is given to the best of our knowledge but without obligation. We are not liable for any wrong This data sheet becomes invalid as soon as a new edition has been published.

3.

• Cut cartuche catch with a knife at the notch before the thread, crush cartridge until both components are visible.

Coating systems corrosion protection

P R O T E G O L® UR - coating 32-55 / 45 L

component polyurethane coating compoundapplication Side by side cartuche, 200 ml

22 | 68219 Mannheim | P.O. Box 81 02 20 | 68202 Mannheim -902 | [email protected] | www.tib-chemicals.com

This information is given to the best of our knowledge but without obligation. We are not liable for any wrong advice or any advice we may have failed to give.This data sheet becomes invalid as soon as a new edition has been published. Please contact us for latest.

2/2

4.

catch with a knife at the notch crush cartridge until both

• Screw on the mixing tube

• Procession time approx. 20 m

• Activate gun

• Discard approx. 1 cm

• After partly ejection the mixing tube hasremain on the cartridge in order to seal the remaining material inside

• In case of building of a crystal cork at the notch of the B-component cartridge, this hasto be removed before mixing tube.

55 / 45 L compound for manual

, 200 ml

Last update 07/2008

chemicals.com

advice or any advice we may have failed to give.

Screw on the mixing tube

time approx. 20 min.

1 cm mixed material

partly ejection the mixing tube has to remain on the cartridge in order to seal the

material inside

In case of building of a crystal cork at the component cartridge, this has

to be removed before screwing on a new