TI-83 Plus Graphing Calculator Basic Skill # 00 Entering and Editing Numerical Calculations.
-
Upload
maximilian-reynolds -
Category
Documents
-
view
224 -
download
0
Transcript of TI-83 Plus Graphing Calculator Basic Skill # 00 Entering and Editing Numerical Calculations.
TI-83 PlusGraphing Calculator
Basic Skill # 00
Entering
and
Editing
Numerical
Calculations
BasicOperations…
• Notice thatthe keypadhas 4 blueoperation keys,and
• a blue [ENTER] keywhich works like anequal sign key.
• You normally press the [ENTER] key after entering your calculation.
Try This Example
954
BasicOperations…
• Notice thatthe keypadhas 10 whitekeys with thedigits from 0 to 9,
• plus a whitedecimal point key,and
• a white negative number sign key. You must use this key and not the subtraction key to indicate a negative number.
Try This Example
4763.
BasicOperations…
• Notice thatthe keypadhas 2 blackkeys forparenthesesor grouping,
• plus a blackkey for “squaring”a number, and
• a black key for indicating other exponents.
Try This Example
283 )(
( x23 + 8 )
Try This Example
362 )(
( 2 - 6 ) ^ 3
Order of Operations• The calculator always performs operations
according to the “universal” order:
• Parentheses (or grouping)
• Exponents
• Multiply or Divide from left to right
• Add or Subtract from left to right
Try This Example
435
Try This Example
323
Try This Example
32
Try This Example
2
2
5
5
)(
Ooops...What if you
make a mistake and type in the
wrong calculation?
2nd KEY
• Notice that the keypad has one
gold key labeled 2nd and there are words written in small gold letters above many of the other keys.
• The 2nd key works like the “Shift” key on a computer keyboard.
• To perform the functions or operations written in small gold letters, first press and release the 2nd key and then press the key below the gold command.
CorrectingMistakes…
• Notice thatthe gold commandabove the blue[ENTER] key isENTRY.
• If you type in acalculation, press[ENTER], and thenrealize that you madea mistake, you can edit this previous entry by first pressing the gold 2nd function key and then the blue [ENTER] key.
Try This Example
451237
Ooops, 237 should have been 239!
•Then use your left arrow key to move the cursor over the entry you need to correct...
To correct your mistake,
press...
2nd ENTRY
ENTER
Recalculating the New Entry...
• With your cursor over the 7 in 237, type the correct digit and then press [ENTER] to recalculate your new entry.
9
ENTER
Inserting more digits and/or operations...
• When editing an entry, the calculator normally only allows you to “replace” or “type over” an existing digit or operation.
• If you need to insert more digits or operations, you must put the calculator into “insert” mode.
• INSERT is the 2nd function command on the DELETE key.
Try This ExampleOoops, what if the 239 should have
been 2039!
•Then use your left arrow key to move the cursor over the entry you need to correct (over the 9)...
To insert another digit,
press...
2nd ENTRY
ENTER
INSERT mode...
• With your cursor over the 9 in 239, press...
2ndINSDEL
• Notice that your cursor changes from a full rectangle to a small underline.
INSERT mode...
• Now type in the new digit...
0ENTER
• Then press [ENTER] to recalculate the new entry...
Correcting Entries...
• Pressing the 2nd function key and [ENTER] the first time will display the most recent entry and allow you to edit it.
• Pressing the 2nd function key and [ENTER] key again will display the second most recent entry and allow you to edit it.
• Pressing these keys again and again will continue displaying previous entries in the calculator’s memory.
2ndENTRY
ENTER
What about fractions??
Will the calculator perform
operations with fractions?
Entering Fractions...
• Notice that the keypad does not have a special “fraction” key so fractionsmust be entered as a division
(numerator / denominator).
• A mixed number must be entered as a sum of the whole number plus thefraction.
(whole number + numerator / denominator)
Try This Example
3
2
2
12
Notice that the answer is displayed as a decimal, not a fraction! The
calculator will always display answers in decimal form unless you use a special command to convert
the decimal answer to fraction form.
•Now let’s use a special command to convert the answer into a fraction.
Let’s edit this entry,
press...
2nd ENTRY
ENTER
Press...
MATH
ENTER
Then press...
Then press [ENTER] a second time to recalculate your entry...
ENTER
Notice that the answer is now displayed as an improper fraction!
MATH
ENTEROR
Anytime you enter fractions into a calculation and you want your answer expressed as a fraction, press [MATH]
and then [ENTER] (or [MATH] and then the [ 1 ] key) before pressing
[ENTER] to complete the calculation.
MATH
1
Summary
• Remember the special keys used for special numbers or operations– negative number key– parentheses keys (order of operations)– x2 “squared” key or ^ “exponent” key– 2nd function ENTRY command for correcting
mistakes or editing previous entries– “>Frac” command for converting answers into
fraction form