THHÖÖ ÄVVIIEENÄN ATTRRÖÖÔÔØØNN GG HÑÑAÏÏII...

TTHHÖÖ VVIIEEÄÄNN TTRRÖÖÔÔØØNNGG ÑÑAAÏÏII HHOOÏÏCC CCOOÂÂNNGG NNGGHHIIEEÄÄPP TTPP.. HHCCMM

--------------------

SSAAÛÛNN PPHHAAÅÅMM TTRRÍÍCCHH BBAAÙÙOO TTAAÏÏPP CCHHÍÍ

KKHHOOAA HHOOÏÏCC && CCOOÂÂNNGG NNGGHHEEÄÄ

TTiieeââuu cchhuuaaåånn KKhhooaa hhooïïcc –– CCooâânngg nngghheeää

VViieeäätt NNaamm && TThheeáá ggiiôôùùii 1122//22001155

1122//22001155

hhttttpp::////lliibb..iiuuhh..eedduu..vvnn

TIÊU CHUẨN QUỐC GIA (TCVN) .......................................................... 3

SƠN ................................................................................................................................. 3

THỦY LỢI ..................................................................................................................... 3

ĐƯỜNG BỘ ................................................................................................................... 3

TIÊU CHUẨN NƯỚC NGOÀI ................................................................... 3

CÔNG NGHỆ THÔNG TIN ........................................................................................ 3

ĐIỆN – ĐIỆN TỬ- THIẾT BỊ ...................................................................................... 5

CÁP THÔNG TIN ....................................................................................................... 10

PHƯƠNG TIỆN GIAO THÔNG - VẬN TẢI ........................................................... 10

TÀU THỦY .................................................................................................................. 11

CƠ KHÍ - CHẾ TẠO ................................................................................................... 11

MÁY NÔNG NGHIỆP ................................................................................................ 13

LUYỆN KIM ................................................................................................................ 13

XÂY DỰNG - VẬT LIỆU XÂY DỰNG .................................................................... 14

HÓA HỌC .................................................................................................................... 15

DỤNG CỤ THÍ NGHIỆM .......................................................................................... 15

CHẤT DẺO .................................................................................................................. 16

SƠN ............................................................................................................................... 16

DẦU MỎ....................................................................................................................... 16

NHIÊN LIỆU SINH HỌC RẮN ................................................................................. 16

GỖ - SẢN PHẨM GỖ ................................................................................................. 17

DỆT ............................................................................................................................... 17

THUỐC LÁ .................................................................................................................. 18

SỮA ............................................................................................................................... 18

Y TẾ - THIẾT BỊ Y TẾ .............................................................................................. 18

THIẾT BỊ THỂ THAO ............................................................................................... 19

CHẤT LƯỢNG NƯỚC .............................................................................................. 19

MÔI TRƯỜNG – AN TOÀN ..................................................................................... 19

THIẾT BỊ BẢO HỘ .................................................................................................... 21

QUẢN LÝ – SẢN XUẤT ............................................................................................ 21

TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4

TIÊU CHUẨN QUỐC GIA (TCVN)

SƠN

Trở về đầu trang

1 TCVN 10833:2015 Bột kẽm sử dụng trong sơn. Yêu cầu kỹ thuật và

phương pháp thử

18

THỦY LỢI


2 TCVN 10405:2014 Công trình thủy lợi - Đai cây chắn sóng - Khảo sát và

thiết kế

23

3 TCVN 9904:2014 Công trình thủy lợi. Công trình ở vùng triều. Yêu cầu

tính toán thủy lực ngăn dòng

54

4 TCVN 9901:2014 Công trình thủy lợi. Yêu cầu thiết kế đê biển 127

5

ĐƯỜNG BỘ


6 TCVN 11013:2015 Phương tiện giao thông đường bộ. Đèn báo rẽ trên ô

tô,rơ moóc và sơ mi rơ moóc. Yêu cầu kỹ thuật và

phương pháp thử

22

7 TCVN 11011:2015 Phương tiện giao thông đường bộ. Độ bền của xe mô

tô, xe gắn máy. Yêu cầu và phương pháp thử

21

8 TCVN 11012:2015 Phương tiện giao thông đường bộ. Độ tin cậy của xe

mô tô, xe gắn máy. Yêu cầu và phương pháp thử

21

9 TCVN 10832:2015 Vật liệu kẻ đường phản quang. Màu sắc. Yêu cầu kỹ

thuật và phương pháp thử

13

TIÊU CHUẨN NƯỚC NGOÀI

CÔNG NGHỆ THÔNG TIN


10 ISO 19160-1:2015 Addressing -- Part 1: Conceptual model 57

11 ISO/PAS 19450:2015 Automation systems and integration -- Object-

Process Methodology

162

12 ISO 12632:2015 Graphic technology -- Ink, paper and labels --

Requirements on hot alkali penetration and resistance

4

13 ISO/IEC 18328-1:2015 Identification cards -- ICC-managed devices -- Part

1: General framework

18

14 ISO/IEC 7811-9:2015

Replace: ISO/IEC 7811-

9:2008

Identification cards -- Recording technique -- Part 9:

Tactile identifier mark

3

15 ISO 11799:2015

Replace: ISO

11799:2003

Information and documentation -- Document storage

requirements for archive and library materials

12

16 ISO 7098:2015 Replace:

ISO 7098:1991

Information and documentation -- Romanization of

Chinese

19

17 ISO/IEC TR 18121:2015 Information technology -- Learning, education and

training -- Virtual experiment framework

18

18 ISO/IEC 11179-1:2015

Replace: ISO/IEC

11179-1:2004

Information technology -- Metadata registries (MDR)

-- Part 1: Framework

22

19 ISO/IEC 23001-12:2015 Information technology -- MPEG systems

technologies -- Part 12: Sample Variants in the ISO

base media file format

14

20 ISO/IEC 18477-3:2015 Information technology -- Scalable compression and

coding of continuous-tone still images -- Part 3: Box

file format

8

21 ISO/IEC TR 20004:2015

Replace: ISO/IEC TR

20004:2012

Information technology -- Security techniques --

Refining software vulnerability analysis under

ISO/IEC 15408 and ISO/IEC 18045

17

22 ISO/IEC TR 20000- Information technology -- Service management -- 47

11:2015 Part 11: Guidance on the relationship between

ISO/IEC 20000-1:2011 and service management

frameworks: ITIL®

23 ISO/IEC/IEEE 8802-

A:2015

Information technology -- Telecommunications and

information exchange between systems -- Local and

metropolitan area networks -- Part A: Overview and

architecture

56

24 ISO/IEC 11889-1:2015

Replace: ISO/IEC

11889-1:2009

Information technology -- Trusted Platform Module

Library -- Part 1: Architecture

256

25 ISO/IEC 11889-2:2015

Replace: ISO/IEC

11889-2:2009


Library -- Part 2: Structures

159

26 ISO/IEC 11889-4:2015

Replace: ISO/IEC

11889-4:2009


Library -- Part 4: Supporting Routines

565

27 ISO/IEC 11889-3:2015

Replace: ISO/IEC

11889-3:2009


Library -- Part 3: Commands

457

28 ISO/IEC 19845:2015 Information technology -- Universal Business

Language Version 2.1 (UBL v2.1)

145

29 ISO/IEC 24800-

3:2010/Amd 1:2015JP

Search API 11

30 ISO/IEC/IEEE 29119-

4:2015

Software and systems engineering -- Software testing

-- Part 4: Test techniques

139

ĐIỆN – ĐIỆN TỬ- THIẾT BỊ


31 ISO 18563-3:2015 Non-destructive testing -- Characterization and

verification of ultrasonic phased array equipment --

Part 3: Combined systems

34

32 ISO 19084:2015 Photography -- Digital cameras -- Chromatic

displacement measurements

14

33 IEC 60730-

1:2013/AMD1:2015

Amendment 1 - Automatic electrical controls - Part

1: General requirements

29

34 IEC

62648:2012/AMD1:2015

Amendment 1 - Graphical symbols for use on

equipment - Guidelines for the inclusion of graphical

symbols in IEC publications

9

35 IEC 60730-2-

8:2000/AMD2:2015

Amendment 2 - Automatic electrical controls for

household and similar use - Part 2-8: Particular

requirements for electrically operated water valves,

including mechanical requirements

27

36 IEC 61000-4-

13:2002/AMD2:2015

Amendment 2 - Electromagnetic compatibility

(EMC) - Part 4-13: Testing and measurement

techniques - Harmonics and interharmonics including

mains signalling at a.c. power port, low frequency

immunity test

9

37 IEC 60728-5:2015 Cable networks for television signals, sound signals

and interactive services - Part 5: Headend equipment

188

38 IEC 60603-7-81:2015 Connectors for electronic equipment - Part 7-81:

Detail specification for 8-way, shielded, free and

fixed connectors, for data transmissions with

frequencies up to 2 000 MHz

34

39 IEC TR 62878-2-2:2015 Device embedded substrate - Part 2-2: Guidelines -

Electrical testing

29

40 IEC 62631-3-3:2015 Dielectric and resistive properties of solid insulating

materials - Part 3-3: Determination of resistive

properties (DC methods) - Insulation resistance

32

41 IEC 62631-3-2:2015 Dielectric and resistive properties of solid insulating

materials - Part 3-2: Determination of resistive

properties (DC methods) - Surface resistance and

surface resistivity

34

42 IEC 61000-4-16:2015 Electromagnetic compatibility (EMC) - Part 4-16:

Testing and measurement techniques - Test for

immunity to conducted, common mode disturbances

in the frequency range 0 Hz to 150 kHz

53

43 IEC 60424-4:2015 Ferrite cores - Guidelines on the limits of surface

irregularities - Part 4: Ring-cores

20


irregularities - Part 2: RM-cores

25


irregularities - Part 1: General specification

25

46 IEC TR 63017:2015 Flexible printed circuit boards (FPCBs) - Method of

compensation of impedance variations

16

47 IEC TR 63018:2015 Flexible printed circuit boards (FPCBs) - Method to

decrease signal loss by using noise suppression

materials

14

48 IEC TR 62687:2015 Graphical symbols for use on equipment -

Vocabulary

13

49 IEC 62601:2015 Industrial networks - Wireless communication

network and communication profiles - WIA-PA

487

50 IEC 60534-2-3:2015 Industrial-process control valves - Part 2-3: Flow

capacity - Test procedures

42

51 IEC TS 62872:2015 Industrial-process measurement, control and

automation system interface between industrial

facilities and the smart grid

63

52 IEC TR 62474-1:2015 Material declaration for products of and for the

electrotechnical industry - Part 1: Guidance for the

implementation of IEC 62474

72

53 IEC 62665:2015 Multimedia systems and equipment - Multimedia e-

publishing and e-books technologies - Texture map

for auditory presentation of printed texts

42

54 IEC 62341-6-2:2015 Organic light emitting diode (OLED) displays - Part

6-2: Measuring methods of visual quality and

ambient performance

46

55 IEC 60393-2:2015 Potentiometers for use in electronic equipment - Part

2: Sectional specification - Lead-screw actuated and

rotary preset potentiometers

53


5: Sectional specification - Single-turn rotary low-

power wirewound and non-wirewound

potentiometers

65


6: Sectional specification - Surface mount preset

potentiometers

57

58 IEC TS 62871-1:2015 Professional video strage products - Tape-less

camera recorder using MXF file format - Encoding

guidelines - Part 1: MXF Operational Pattern

20

59 IEC TS 62257-6:2015 Recommendations for renewable energy and hybrid

systems for rural electrification - Part 6: Acceptance,

operation, maintenance and replacement

20


systems for rural electrification - Part 5: Protection

against electrical hazards

46


systems for rural electrification - Part 4: System

selection and design

72


systems for rural electrification - Part 3: Project

development and management

48


systems for rural electrification - Part 2: From

requirements to a range of electrification systems

65

64 IEC 60034-27-3:2015 Rotating electrical machines - Part 27-3: Dielectric

dissipation factor measurement on stator winding

insulation of rotating electrical machines

55

65 IEC 63004:20153 Standard for receiver fixture interface

143

66 IEC 63003:2015 Standard for the common test interface pin map

configuration for high-density, single-tier electronics

test requirements utilizing IEEE Std 1505™

162

67 IEC 60401-3:2015 Terms and nomenclature for cores made of

magnetically soft ferrites - Part 3: Guidelines on the

format of data appearing in manufacturers catalogues

of transformer and inductor cores

28

68 IECEE TRF 60335-2-

2&54:2015

This Test Report applies to: IEC 60335-2-2:2009

(Sixth Edition) + A1:2012 and IEC 60335-2-54:2008

(Fourth Edition) + A1:2015 for use in conjunction

with IEC 60335-1:2010 (Fifth Edition) + A1:2013

98

69 IECEE TRF 60335-2-

3:2015


(Sixth Edition) + A1:2015 in conjunction with IEC

60335-1 2010 (Fifth Edition) incl. Corr. 1:2010 and

Corr. 2:2011 + A1:2013

93

70 IECEE TRF 60335-2-

97:2015

This Test Report applies to: IEC 60335-2-97 :2002

(Second Edition) + A1:2004 + A2:2008 in

conjunction with IEC 60335-1:2010 (Fifth Edition)

incl. Corr. 1:2010 and Corr. 2:2011 + A1:2013

97

71 IECEE TRF 60335-2-

98:2015


(Second Edition) + A1:2004 + A2:2008 in

conjunction with IEC 60335-1:2010 (Fifth Edition)

incl. Corr. 1:2010 and Corr. 2:2011 + A1:2013

98

72 IECEE TRF 60669-

1:2015

This Test Report applies to: IEC 60669-1:1998

(Third Edition) + A1:1999 + A2:2006

39

73 IECEE TRF 60730-2- This Test Report applies to: IEC 60730-2-8:2000 20

8:2015 (Second Edition) + A1:2002 for use with IEC 60730-

1:1999

74 IECEE TRF 60838-2-

2:2015


(First Edition) +A1:2012

20

75 IECEE TRF 61439-

5:2015

This Test Report applies to: IEC 61439-5:2014

(Second Edition)

76

CÁP THÔNG TIN


76 IEC 62153-4-15:2015 Metallic communication cable test methods - Part 4-

15: Electromagnetic compatibility (EMC) - Test

method for measuring transfer impedance and

screening attenuation - or coupling attenuation with

triaxial cell

39

77 IEC 62153-4-7:2015 Metallic communication cable test methods - Part 4-

7: Electromagnetic compatibility (EMC) - Test

method for measuring of transfer impedance ZT and

screening attenuation aS or coupling attenuation aC

of connectors and assemblies up to and above 3 GHz

- Triaxial tube in tube method

41

78 IEC 61935-1:2015 Specification for the testing of balanced and coaxial

information technology cabling - Part 1: Installed

balanced cabling as specified in ISO/IEC 11801 and

related standards

113

PHƯƠNG TIỆN GIAO THÔNG - VẬN TẢI


79 ISO 12855:2015

Replace: ISO

12855:2012; ISO

12855:2012/Cor 1:2013

Electronic fee collection -- Information exchange

between service provision and toll charging

100

80 ISO 11898-1:2015

Replace: ISO 11898-

Road vehicles -- Controller area network (CAN) --

Part 1: Data link layer and physical signalling

65

1:2003; ISO 11898-

1:2003/Cor 1:2006

81 ASTM D913 – 15

Revises: ASTM D913–

10

Standard Practice for Evaluating Degree of Traffic

Marking Line Wear

2

TÀU THỦY



ISO 5488:1979

Ships and marine technology -- Accommodation

ladders

8


ISO 7061:1993

Ships and marine technology -- Aluminium shore

gangways for seagoing vessels

11

84 ISO 17905:2015 Ships and marine technology -- Installation,

inspection and maintenance of container securing

devices for ships

25

85 ISO 29404:2015 Ships and marine technology -- Offshore wind

energy -- Supply chain information flow

37

CƠ KHÍ - CHẾ TẠO


86 ISO/TR 14799-2:2015

Replace: ISO/TR 14799-

2:2005

Comparison of worldwide escalator and moving walk

safety standards -- Part 2: Abbreviated comparison

and comments

55

87 ISO/TR 14799-1:2015

Replace: ISO/TR 14799-

1:2005

Comparison of worldwide escalator and moving walk

safety standards -- Part 1: Rule by rule comparison

166

88 ISO 14878:2015 Cycles -- Audible warning devices -- Technical

specification and test methods


ISO 6695:1991

Cycles -- Pedal axle and crank assembly with square

end fitting -- Assembly dimensions

2

90 ISO 18246:2015 Electrically propelled mopeds and motorcycles --

Safety requirements for conductive connection to an

33

external electric power supply

91 ISO 28927-8:2009/Amd

1:2015

Polishing machines, modified feed forces 11

92 ISO/TS 19425:2015 Reciprocating internal combustion engines --

Measurement method for air cleaners -- Sound power

level of combustion air inlet noise and insertion loss

using sound pressure

42

93 ISO 15242-1:2015

Replace: ISO 15242-

1:2004

Rolling bearings -- Measuring methods for vibration

-- Part 1: Fundamentals

16

94 ISO 15242-2:2015

Replace: ISO 15242-

2:2004; ISO 15242-

2:2004/Cor 1:2010

Rolling bearings -- Measuring methods for vibration

-- Part 2: Radial ball bearings with cylindrical bore

and outside surface

7


ISO 3245:2007

Rolling bearings -- Needle roller bearings with drawn

cup and without inner ring -- Boundary dimensions,

geometrical product specifications (GPS) and

tolerance values

11

96 ISO 21107:2015

Replace: ISO

21107:2004

Rolling bearings and spherical plain bearings --

Search structure for electronic media --

Characteristics and performance criteria identified by

property vocabulary

31

97 ISO 19353:2015

Replace: ISO

19353:2005

Safety of machinery -- Fire prevention and fire

protection

35

98 ISO 13849-1:2015

Replace: ISO 13849-

1:2006; ISO 13849-

1:2006/Cor 1:2009

Safety of machinery -- Safety-related parts of control

systems -- Part 1: General principles for design

86

99 ASTM F2215 – 15

Revises: ASTM F2215–

Standard Specification for Balls, Bearings, Ferrous

and Nonferrous for Use in Bearings, Valves, and

10

08 Bearing Applications

MÁY NÔNG NGHIỆP


100 ISO 17989-1:2015 Tractors and machinery for agriculture and forestry --

Sustainability -- Part 1: Principles

15

LUYỆN KIM


101 ISO 14737:2015

Replace: ISO

14737:2003; ISO

3755:1991

Carbon and low alloy cast steels for general

applications

9

102 ISO 7500-1:2015

Replace: ISO 7500-

1:2004; ISO 7500-

1:2004/Cor 1:2008

Metallic materials -- Calibration and verification of

static uniaxial testing machines -- Part 1:

Tension/compression testing machines -- Calibration

and verification of the force-measuring system

18

103 ISO 26843:2015 Metallic materials -- Measurement of fracture

toughness at impact loading rates using precracked

Charpy-type test pieces

35

104 ISO/TS 18223:2015 Nickel alloys -- Determination of Nickel content --

Inductively coupled plasma atomic emission

spectrometric method

15

105 ISO 4991:2015 Replace:

ISO 4991:2005

Steel castings for pressure purposes 19

106 ISO 6935-2:2015

Replace: ISO 6935-

2:2007

Steel for the reinforcement of concrete -- Part 2:

Ribbed bars

23

107 ASTM A962/A962M –

15 Revises: ASTM

A962/A962M–14a

Standard Specification for Common Requirements

for Bolting Intended for Use at Any Temperature

from Cryogenic to the Creep Range

12

108 ASTM A269/A269M - Standard Specification for Seamless and Welded 7

15a Revises: ASTM

A269/A269M–15

Austenitic Stainless Steel Tubing for General Service

109 ASTM B975 – 15 Standard Test Method for Measurement of Internal

Stress of Metallic Coatings by Split Strip Evaluation

(Deposit Stress Analyzer Method)

8

110 ASTM B636/B636M –

15 Revises: ASTM

B636– 84 (Reapproved

2010)

Standard Test Method for Measurement of Internal

Stress of Plated Metallic Coatings with the Spiral

Contractometer

5

111 JIS G 0582:2015/AMD 1 Automated ultrasonic examination of steel pipes and

tubes ( Amendment 1)

2

112 JIS G 3126:2015 Carbon steel plates for pressure vessels for low

temperature service

15

113 JIS G 3133:2015 Decarburized steel sheets and strip for porcelain

enamelling

16

114 JIS G 0804:2015 Digital radiographic examination with for the weld

seam of welded steel tubes

27

115 JIS G 0555:2015/AMD 1 Microscopic testing method for the non-metallic

inclusions in steel ( Amendment 1)

3

116 JIS G 0803:2015 Radiographic examination with film for the weld

seam of welded steel tubes

22

117 JIS G 3547:2015 Zinc-coated low carbon steel wires 15

XÂY DỰNG - VẬT LIỆU XÂY DỰNG


118 ISO 19026:2015 Accessible design -- Shape and colour of a flushing

button and a call button, and their arrangement with a

paper dispenser installed on the wall in public

restroom

3

119 ISO 29584:2015

Replace: ISO/TS

Glass in building -- Pendulum impact testing and

classification of safety glass

40

29584:2012

120 ASTM E3036 – 15 Standard Guide for Notating Facade Conditions in

the Field

4

121 ASTM D5982 – 15


07

Standard Test Method for Determining Cement

Content of Fresh Soil-Cement (Heat of

Neutralization Method)

11

122 JIS A 1460:2015 Determination of the emision of formaldehyde from

building boards -- Desiccator method

14

HÓA HỌC


123 ISO/ASTM 52900:2015 Additive manufacturing -- General principles --

Terminology

19

124 ISO/TR 15916:2015

Replace: ISO/TR

15916:2004

Basic considerations for the safety of hydrogen

systems

62

125 ISO 14606:2015

Replace: ISO

14606:2000

Surface chemical analysis -- Sputter depth profiling -

- Optimization using layered systems as reference

materials

16

126 ASTM C903 – 15

Revises: ASTM C903–

10

Standard Practice for Preparing Refractory

Specimens by Cold Gunning

8

127 ASTM D465 – 15


05 (Reapproved 2010)

Standard Test Methods for Acid Number of Pine

Chemical Products Including Tall Oil and Other

Related Products

4

DỤNG CỤ THÍ NGHIỆM



ISO 384:1978

Laboratory glass and plastics ware -- Principles of

design and construction of volumetric instruments

15

129 ISO 3819:2015 Replace:

ISO 3819:1985

Laboratory glassware -- Beakers 4

130 ISO 4797:2015 Replace:

ISO 4797:2004

Laboratory glassware -- Boiling flasks with conical

ground joints

3

CHẤT DẺO


131 ISO 6383-1:2015

Replace: ISO 6383-

1:1983

Plastics -- Film and sheeting -- Determination of tear

resistance -- Part 1: Trouser tear method

6

132 ASTM C1303/C1303M –

15 Revises: ASTM

C1303/C1303M–14

Standard Test Method for Predicting Long-Term

Thermal Resistance of Closed-Cell Foam Insulation

22

SƠN


133 JIS H 7851:2015 Test method of cyclic heating for thermal-barier

coatings under temperature gradient

21

DẦU MỎ


134 ISO 21007-2:2015

Replace: ISO 21007-

2:2013

Gas cylinders -- Identification and marking using

radio frequency identification technology -- Part 2:

Numbering schemes for radio frequency

identification

41

135 ASTM D2318 – 15


14ε1

Standard Test Method for Quinoline-Insoluble (QI)

Content of Tar and Pitch

4

136 ASTM D7280 – 15


06 (Reapproved 2011)

Standard Test Method for Quinoline-Insoluble (QI)

Content of Tar and Pitch by Stainless Steel Crucible

Filtration

5

137 ASTM D4312 – 15


95a (Reapproved 2010)

Standard Test Method for Toluene-Insoluble (TI)

Content of Tar and Pitch (Short Method)

3

NHIÊN LIỆU SINH HỌC RẮN


138 ISO 17828:2015 Solid biofuels -- Determination of bulk density

139 ISO 17831-1:2015 Solid biofuels -- Determination of mechanical

durability of pellets and briquettes -- Part 1: Pellets

7

140 ISO 17831-2:2015 Solid biofuels -- Determination of mechanical

durability of pellets and briquettes -- Part 2:

Briquettes

6

GỖ - SẢN PHẨM GỖ


141 JIS A 5905:2014 Fiberboards 54

DỆT


142 ISO 18168:2015 Textile floor coverings -- Colour fastness to

shampooing

5

143 ISO 16373-1:2015 Textiles -- Dyestuffs -- Part 1: General principles of

testing coloured textiles for dyestuff identification

17

144 ISO 18080-1:2015 Textiles -- Test methods for evaluating the

electrostatic propensity of fabrics -- Part 1: Test

method using corona charging

16



method using rotary mechanical friction

14



method using manual friction

16



method using horizontal mechanical friction

10

148 JIS L 1930:2014 Textiles-- Domestic washing and drying procedures

for textile testing

44

THUỐC LÁ


149 ISO 6565:2015 Replace:

ISO 6565:2011

Tobacco and tobacco products -- Draw resistance of

cigarettes and pressure drop of filter rods -- Standard

conditions and measurement

20

SỮA


150 ISO 19344:2015 (IDF

232)

Milk and milk products -- Starter cultures, probiotics

and fermented products -- Quantification of lactic

acid bacteria by flow cytometry

25

Y TẾ - THIẾT BỊ Y TẾ


151 ISO/TR 17302:2015N Anotechnologies -- Framework for identifying

vocabulary development for nanotechnology

applications in human healthcare

20

152 ISO/TS 16843-2:2015 Health informatics -- Categorial structures for

representation of acupuncture -- Part 2: Needling

9

153 ISO/TS 19844:2015 Health informatics -- Identification of medicinal

products -- Implementation guidelines for data

elements and structures for the unique identification

and exchange of regulated information on substances

260

154 ISO/TS 13582:2015

Replace: ISO/TS

13582:2013

Health informatics -- Sharing of OID registry

information

27

155 ISO 13940:2015 Health informatics -- System of concepts to support

continuity of care

152

156 ISO 11810:2015

Replace: ISO 11810-

1:2005; ISO 11810-

2:2007

Lasers and laser-related equipment -- Test method

and classification for the laser resistance of surgical

drapes and/or patient protective covers -- Primary

ignition, penetration, flame spread and secondary

21

ignition

157 ISO/TR 19498:2015 Ophthalmic optics and instruments -- Correlation of

optotypes

4

158 ISO 29661:2012/Amd

1:2015

Reference point of personal dosemeters 3

THIẾT BỊ THỂ THAO


159 ISO 8061:2015 Replace:

ISO 8061:2004; ISO

8061:2004/Amd 1:2006

Alpine ski-bindings -- Selection of release torque

values

5

160 ISO 11088:2015

Replace: ISO

11088:2006

Assembly, adjustment and inspection of an alpine

ski/binding/boot (S-B-B) system

13

CHẤT LƯỢNG NƯỚC


161 ISO 13167:2015 Water quality -- Plutonium, americium, curium and

neptunium -- Test method using alpha spectrometry

20

MÔI TRƯỜNG – AN TOÀN


162 ISO 14644-1:2015

Replace: ISO 14644-

1:1999

Cleanrooms and associated controlled environments -

- Part 1: Classification of air cleanliness by particle

concentration

37

163 ISO 14644-2:2015

Replace: ISO 14644-

2:2000

Cleanrooms and associated controlled environments -

- Part 2: Monitoring to provide evidence of

cleanroom performance related to air cleanliness by

particle concentration

14

164 ISO 21207:2015

Replace: ISO

21207:2004; ISO

21207:2004/Cor 1:2008

Corrosion tests in artificial atmospheres --

Accelerated corrosion tests involving alternate

exposure to corrosion-promoting gases, neutral salt-

spray and drying

9

165 ISO 13344:2015

Replace: ISO

13344:2004

Estimation of the lethal toxic potency of fire effluents 13

166 ISO/TS 29761:2015 Fire safety engineering -- Selection of design

occupant behavioural scenarios

25

167 ISO 14520-1:2015

Replace: ISO 14520-

1:2006; ISO 14520-

1:2006/Cor 1:2007;

ISO/TS 20885:2003

Gaseous fire-extinguishing systems -- Physical

properties and system design -- Part 1: General

requirements

101

168 ISO 19017:2015

Replace: ISO 14850-

1:2004

Guidance for gamma spectrometry measurement of

radioactive waste

48

169 ISO/TS 14837-32:2015 Mechanical vibration -- Ground-borne noise and

vibration arising from rail systems -- Part 32:

Measurement of dynamic properties of the ground

53

170 ISO 19449:2015 Mopeds -- Measurement methods for gaseous

exhaust emissions during inspection or maintenance

24

171 ISO 16638-1:2015 Radiological protection -- Monitoring and internal

dosimetry for specific materials -- Part 1: Inhalation

of uranium compounds

43

172 ISO 17733:2015

Replace: ISO

17733:2004

Workplace air -- Determination of mercury and

inorganic mercury compounds -- Method by cold-

vapour atomic absorption spectrometry or atomic

fluorescence spectrometry

54

173 IEC 60846-2:2015 Radiation protection instrumentation - Ambient

and/or directional dose equivalent (rate) meters

and/or monitors for beta, X and gamma radiation -

Part 2: High range beta and photon dose and dose

rate portable instruments for emergency radiation

protection purposes

34

174 JIS A 1901:2015 Determination of the emission of volatile organic

compounds and aldehydes for building products.

Small chamber method

47

THIẾT BỊ BẢO HỘ


175 ISO 12127-1:2015

Replace: ISO 12127-

1:2007

Clothing for protection against heat and flame --

Determination of contact heat transmission through

protective clothing or constituent materials -- Part 1:

Contact heat produced by heating cylinder

9

QUẢN LÝ – SẢN XUẤT


176 ISO 16355-1:2015 Application of statistical and related methods to new

technology and product development process -- Part

1: General principles and perspectives of Quality

Function Deployment (QFD)

73

177 IEC 62264-4:2015 Enterprise-control system integration - Part 4:

Objects models attributes for manufacturing

operations management integration

191

178 JIS Q 1001:2015/AMD 1 Conformity assessment - Conformity assessment for

Japanese Industrial Standards - General guidance on

a third-party certification system for products (

Amendment 1)

3

Thư viện Trường Đại học Công Nghiệp TP.HCM phối hợp với Trung tâm thông tin khoa

học và công nghệ TP.HCM cung cấp thông tin toàn văn dành cho người sử dụng thư viện trong

trường (SV, GV, HVCH, CBVC...) có nhu cầu học tập, nghiên cứu, tham khảo. Để gửi và nhận thông

tin, xin vui lòng liên hệ:

1. Thư viện Đại học Công Nghiệp TP.HCM: Gửi thông tin yêu cầu bằng 1 trong các phương tiện

sau:

+ Cổng thông tin Thư viện: http://lib.iuh.edu.vn tại mục "Yêu cầu tin";

+ Facebook: http://facebook.com/libiuh - Gửi qua "Tin nhắn" trên Page;

+ Liên hệ Phòng Nghiệp vụ: Phan Minh Trí – 0919.8989.33 - ĐT: (08) 38940390 (130) - Email:

[email protected]

http://lib.iuh.edu.vn/

http://facebook.com/libiuh

mailto:[email protected]

2. Phòng đảm bảo thông tin của trung tâm thông tin khoa học và công nghệ TP.HCM

Địa chỉ: 79 Trương Định - Q1 - TP.HCM

ĐT: (08)38243826: (08)38297040 Ext: 202-203-216) Fax: 38291957

Website: www.cesti.gov.vn Email: [email protected]

Lưu ý

1/ Khi đến gửi yêu cầu thông tin, bạn nhớ mang theo thẻ sinh viên, thẻ giảng viên của trường.

2/ Thông tin được cung cấp miễn phi, ngoại trừ chi phí: in ấn tài liệu, mua tài liệu (nếu có)

Thư viện Trường Đại học Công nghiệp Thành phố H Chí Minh.

http://www.cesti.gov.vn/

mailto:[email protected]

THHÖÖ ÄVVIIEENÄN ATTRRÖÖÔÔØØNN GG HÑÑAÏÏII...

Documents

Transcript of THHÖÖ ÄVVIIEENÄN ATTRRÖÖÔÔØØNN GG HÑÑAÏÏII...