These knitted toys make a HUGE difference to the …...Meet Harry Bear! Size is approximately 12”...

16
Thank you for supporting Buddy Bag Foundation! Below are only examples of Buddy Bag Knitting Patterns; any suitable patterns with a maximum height of 12”, and any wool can be used. These knitted toys make a HUGE difference to the children. In each Buddy Bag we include a knitted toy. Knitted with love Further details about the Buddy Bag Foundation can be found at: www.buddybagfoundation.co.uk

Transcript of These knitted toys make a HUGE difference to the …...Meet Harry Bear! Size is approximately 12”...

Page 1: These knitted toys make a HUGE difference to the …...Meet Harry Bear! Size is approximately 12” tall Materials: Berroco Chinchilla (50grs), 1 ball #5535 Fawn (MC) for bear, 1 ball

Thank you for supporting Buddy Bag Foundation!

Below are only examples of Buddy Bag Knitting Patterns; any suitable

patterns with a maximum height of 12”, and any wool can be used.

These knitted toys make a HUGE difference to the children.

In each Buddy Bag we include a knitted toy.

Knitted with love 💙

Further details about the Buddy Bag Foundation can be found at:

www.buddybagfoundation.co.uk

Page 2: These knitted toys make a HUGE difference to the …...Meet Harry Bear! Size is approximately 12” tall Materials: Berroco Chinchilla (50grs), 1 ball #5535 Fawn (MC) for bear, 1 ball

Stitch Glossary Inc 1. K in front and back of next st. WTS. Sl 1, bring yarn to RS of work, return slipped st back to LH needle, turn

work, bring yarn to WS of work, sl 1 purlwise.

Back - 1st Leg

With straight needles, using MC, cast

on 4 sts.

Row 15: K1, SSK, k2, k2 tog, k1 – 6

sts. Break off yarn and sl 6 sts to st

holder.

Row 7: K5, SSK, k4, k2 tog, k5 – 16 sts.

Row 1 (RS): Inc 1, k2, inc 1 – 6 sts.

2nd Leg

Work same as for 1st Leg, end on Row

15, leaving sts on needle.

Row 9: (K1, SSK) twice, k4, k2 tog, k1,

k2 tog, k1 – 12 sts.

Row 2 and all WS rows: Purl.

Joining Row (WS): Purl 6 sts, cast on 1

st, purl 6 sts from holder – 13 sts.BODY

Row 11: K2, SSK, k4, k2 tog, k2 – 10 sts.

Row 3: K1, (Inc 1) 4 times, k1 – 10 sts.

Row 1: K4, Inc 1, k3, Inc 1, k4 – 15 sts.

Row 12 (WS): Purl 10, then cast on 9

sts (1st arm) – 19 sts.

Row 5: K8, WTS, p5, WTS, k7 – 10 sts.

Row 2 and all WS rows (unless

otherwise specified): Purl.

Row 13: K9 (1st arm), k10, then cast on

9 sts (2nd arm) – 28 sts.

Row 7: K2, SSK, k2, k2 tog, k2 – 8 sts.

Row 3: K2, Inc 1, (k4, Inc 1) twice, k2 –

18 sts.

Rows 15, 17 and 19: Knit – 28 sts.

Rows 9, 11 and 13: Knit – 8 sts.

Row 5: K16, WTS, p13, WTS, k12, WTS,

p11, WTS, k10, WTS, p9, WTS, k13 – 18

sts.

Row 21: Bind off 9 sts, k to end – 19

sts.

Meet Harry Bear! www.berroco.com

Size is approximately 12” tall

Materials: Berroco Chinchilla (50grs), 1 ball

#5535 Fawn (MC) for bear, 1 ball #5560 Madder

Lake (A) for scarf, Berroco Glace (50 grs), 1 hank

#2519 Midas (B)

Straight knitting needles, size 8 OR SIZE TO

OBTAIN GAUGE.

Crochet hook, size 5.00 mm (H).

Black embroidery floss.

Tapestry needle.

1 St holder.

Small amount of polyfil for stuffing. GAUGE

14 sts = 4”; 20 rows = 4” in St st with MC on size

8 needles.

TO SAVE TIME, TAKE TIME TO CHECK GAUGE.

Page 3: These knitted toys make a HUGE difference to the …...Meet Harry Bear! Size is approximately 12” tall Materials: Berroco Chinchilla (50grs), 1 ball #5535 Fawn (MC) for bear, 1 ball

Row 22 (WS): Bind off 9 sts purlwise, p

to end – 10 sts.

Head -

Row 1 (RS): SSK, k6, k2 tog – 8 sts.

Row 11: K5, SSK, k8, k2 tog, k5 – 20 sts.

Row 4: P2 tog, p4, p2 tog – 6 sts.

Row 2 and all WS rows: Purl.

Row 13: K2, SSK, (k5, k2 tog) twice, k2

– 17 sts.

Row 5: K2 tog, k2, k2 tog – 4 sts.

Row 3: Inc 1, k1, Inc 1, k2, Inc 1, k1, Inc

1 – 12 sts.

Row 15: SSK, k13, WTS, p12, WTS, k10,

WTS, p8, WTS, k6, WTS, p4, WTS, k8, k2

tog – 15 sts.

Row 6: Bind off as follows: K2 tog

twice. Bind off ;ast 2 sts.

Row 5: Inc 1, k3, Inc 1, k2, Inc 1, k3,

WTS, p11, WTS, k10, WTS, p9, WTS,

k10, Inc 1 – 16 sts.

Row 17: K5, sl sts to holder, bind off 5

sts, k to end – 5 sts.

2nd Ear: With WS facing, join MC and

purl 5 sts from holder.

Row 7: Inc 1, k3, Inc 1, k6, Inc 1, k3, Inc

1 – 20 sts.

1st Ear: Purl 5.

Row 1 (RS): (Inc 1, k1) twice, Inc 1 – 8

sts.

Work same as for 1st ear.

Row 9: K4, Inc 1, k10, Inc 1, k4 – 22 sts.

Row 2: Purl.

Row 3: Knit – 8 sts.

Front - 1st Leg: With straight needles,

using MC, cast on 4 sts.

Row 3: K1, (Inc 1) 4 times, k1 – 10 sts.

Rows 9, 11 and 13: Knit – 8 sts.

Row 1 (RS): Inc 1, k2, Inc 1 – 6 sts.

Row 5: K8, WTS, p5, WTS, k4, WTS, p3,

WTS, k6 – 10 sts.

Row 15: K1, SSK, k2, k2 tog, k1 – 6

sts. Break off yarn and sl 6 sts to st

holder.

Row 2 and all WS rows: Purl.

Row 7: K3, SSK, k2 tog, k3 – 8 sts.

2nd Leg: Work same as for 1st Leg, end

on Row 15, leaving sts on needle.

Joining Row (WS): Purl 6, cast on 1 st,

purl 6 sts from holder – 13 sts.

Page 4: These knitted toys make a HUGE difference to the …...Meet Harry Bear! Size is approximately 12” tall Materials: Berroco Chinchilla (50grs), 1 ball #5535 Fawn (MC) for bear, 1 ball

Body - Row 1 (RS): K5, Inc 1, k1, Inc 1,

k5 – 15 sts.

Row 13: K9 (1st arm), k13, then cast on

9 sts (2nd arm) – 31 sts.

Row 5: (Inc 1) twice, k1, (Inc 1) 4 times,

k1, (Inc 1) twice – 18 sts.

Row 2 and all WS rows (unless

otherwise specified): Purl.

Row 15: K12, SSK, k3, k2 tog, k12 - 29

sts.

Row 7: K2, Inc 1, k3, Inc 1, k4, Inc 1, k2,

WTS, p11, WTS, k9, WTS, p7, WTS, k5,

WTS, p3, WTS, k8, Inc 1, k2 – 22 sts.

Row 3: Inc 1, k5, Inc 1, k1, Inc 1, k5, Inc

1 – 19 sts.

Row 17: Knit - 29 sts.

Row 19: K11, SSK, k3, k2 tog, k11 - 27

sts.

Row 9: K1, Inc 1, k5, (SSK) twice, (k2

tog) twice, k5, Inc 1, k1 – 20 sts.

Row 5: K15, WTS, p10, WTS, k8, WTS,

p6, WTS, k4, WTS, p2, WTS, k10 – 19

sts.

Row 21: Bind off 9 sts, k to end – 18

sts.

Row 11: K9, k2 tog, k9 – 19 sts.

Row 7: K5, SSK, k5, k2 tog, k5 – 17 sts.

Row 22 (WS): Bind off 9 sts purlwise, p

to end – 9 sts.HEAD

Row 13: K2, SSK, k11, k2 tog, k2 – 17

sts.

Row 9: K4, SSK, k5, k2 tog, k4 – 15 sts.

Row 1 (RS): SSK, k5, k2 tog – 7 sts.

Row 15: SSK, k13, WTS, p12, WTS, k10,

WTS, p8, WTS, k6, WTS, p4, WTS, k8, k2

tog – 15 sts.

Row 11: K2, SSK, k7, k2 tog, k2 – 13 sts.

Row 2 and all WS rows: Purl.

Row 17: K5, sl these sts onto holder,

bind off 5 sts, k to end – 5 sts.

Row 12 (WS): P13, then cast on 9 sts

(1st arm) – 22 sts.

Row 3: (K1, Inc 1) 3 times, k1 – 10 sts.

Ears: Work same as for back ears.

Scarf - With crochet hook, using A, ch 5.

Row 2: Ch 1, sc in each sc across – 4

sc’s. Turn. Rep Row 2 until piece

measures 1 1/4”.

Fringe: Cut One 3” long strand of

B. Fold strand in half. With crochet

hook, draw center of strand through

first st of cast-on edge of scarf forming

a loop.

Row 1: Sc in 2nd ch from hook and in

each ch across – 4 sc’s. Turn.

* Change to B and rep Row 2

twice. Change to A and rep Row for 1

1/4”. Rep from * 8 times more. Fasten

off.

Pull ends of fringe through this loop. In

this manner, make 4 fringes evenly

spaced along cast-on and bound-off

edges of scarf. Trim fringe to even off if

necessary.

Finishing - Sew back and front of bear

together, leaving ears and bound-off sts

at top of head open for stuffing. Stuff

legs and arms first, making them quite

firm.

Stuff body next, being sure to stuff

lightly so that bear is huggable. Stuff

muzzle next, then head. This makes the

muzzle stand out. Sew bound-off sts

and ears tog. Embroider the face with

Optional: If desired, you may work

running sts around the muzzle with

matching yarn and pull up slightly for

more definition. You may also sew

Page 5: These knitted toys make a HUGE difference to the …...Meet Harry Bear! Size is approximately 12” tall Materials: Berroco Chinchilla (50grs), 1 ball #5535 Fawn (MC) for bear, 1 ball

embroidery floss as in photo. Tie scarf

around neck as in photo.

across the base of ears and around

curve of ear to give the ear more shape.

Legs: With 6mm (US 10) needles and one strand each of the pink and beige yarns held together, cast on 8 stitches.

Stocking stitch for 16 rows, ending on a purl row. Break yarn and transfer live stitches to a stitch holder.

Meet Blue’s Big Hug Bear!

http://www.barddance.org/knittering/bluesbighugbear.h

tm

Size is approximately 12” tall

For bear:

Aran (worsted) yarn, pink

Aran (worsted) yarn, beige

6mm (US 10) needles

2 black buttons for eyes

Black yarn

Stuffing

For scarf: DK (sport) tweed yarn in brown 4mm (US 6) needles

Bear is knitted in one piece from toe to toe, and then

folded up and sewn into shape before being stuffed and

features added. Use any colour combination for bear,

remembering to hold two strands together throughout.

Page 6: These knitted toys make a HUGE difference to the …...Meet Harry Bear! Size is approximately 12” tall Materials: Berroco Chinchilla (50grs), 1 ball #5535 Fawn (MC) for bear, 1 ball

Repeat for second leg, again ending on a purl row. Do NOT break yarn.

Knit across the leg just worked, and the leg from the stitch holder (16 stitches).

Belly & arms: Stocking stitch 12 rows

Cast on 10 stitches at the beginning of the next two rows using backward loop cast on. These form the arms, a total of 36 stitches (16 + 10 +10)

Stocking stitch 6 rows.

Cast off 10 stitches at the beginning of each of the next 2 rows, to finish the arms (16 stitches remaining)

Head: Stocking stitch 32 rows (creating front and back of head).

Arms & back: Cast on 10 stitches at the beginning of the next two rows using backward loop cast on. These form the arms, a total of 36 stitches (16 + 10 +10)

Stocking stitch 6 rows.

Cast off 10 stitches at the beginning of each of the next 2 rows, to finish the arms (16 stitches remaining)

Stocking stitch 12 rows.

Legs: Work first 8 stitches on needle and slip remaining 8 stitches to a stitch holder.

Work 16 rows for leg and cast off.

Place stitches from stitch holder back onto needles, re-join yarn and work 16 rows for leg. Cast off.

Page 7: These knitted toys make a HUGE difference to the …...Meet Harry Bear! Size is approximately 12” tall Materials: Berroco Chinchilla (50grs), 1 ball #5535 Fawn (MC) for bear, 1 ball

Making Up: Weave in all ends. Fold bear in half along the head section ensuring legs and arms line up neatly. Pin in place if desired. Starting at an inside leg roughly an inch from the end of the leg, begin seaming the bear, following round the outside to the top of the head. Secure yarn, and seam other side, again starting near the bottom of the leg and continuing to the top of the head, with an opening now left where the legs join the body.

Create ears by running stitches across the corner at each side of the head.

Stuff bear, filling head and arms first, and then legs and stomach.

Make neck by weaving a length of yarn in and out around the bear where the arms join. Pull tight, pushing more stuffing up into the head to firm before securing the yarn and tidying the ends. Finish stuffing the bear, and seam the opening shut.

Sew buttons on for eyes and embroider a nose and mouth. If giving to a child, embroider eyes rather than using buttons.

Scarf: Using 4mm (US 6) needles, cast on 10 stitches using brown DK yarn. Work brioche stitch as described below until scarf reaches desired length, bind off in pattern.

Brioche stitch: row 1: K row 2: *(yif, sl 1 purl-wise, k1)* row 3: *(yif, s1 1 purl-wise, k2tog)* repeat row 3 for pattern.

You could also use k1 p1 ribbing or other suitable stitch pattern, or substitute length of wide ribbon if not intended for a small child.

Page 8: These knitted toys make a HUGE difference to the …...Meet Harry Bear! Size is approximately 12” tall Materials: Berroco Chinchilla (50grs), 1 ball #5535 Fawn (MC) for bear, 1 ball

Leg: *With brown cast on 15 sts. First row: Increase in every st. (30 sts). Starting with a purl row, stockinette 7 rows. **

Next row: K 6, K 2 tog 4 times, K to end of row.

Next row: Purl.

Next row: K6, K 2 tog 2 times, K to end of row.

Starting with a purl row, stockinette 15 rows. Put stitches on a spare needle.

Second leg: Repeat instructions from * to ** above. Next row: K 16, K 2 tog 4 times, K 6. Next row: Purl. Next row: K 16, K 2 tog 2 times, K 6. Starting with a purl row, stockinette 15 rows. Next row: Knit across stitches on needle, knit across stitches on spare needle. You should now have both legs on the same needle and 48 stitches. Mark each end of this row with a piece of colored yarn.

Body: Starting with a purl row, stockinette 23 rows.

Decrease for neck: K 2 tog across row. (24 sts) Starting with a purl row, stockinette 3 rows.

Increase for head: Inc in every stitch. (48 sts)

Head: Starting with a purl row, stockinette 23 rows.

Shape top of head: *K 4, K 2 tog*. Repeat from * to * across row. Next row: Purl *K 3, K 2 tog*. Repeat from * to * across row. Next row: Purl. *K 2, K 2 tog*. Repeat from * to * across row. Next row: Purl. *K 1, K 2 tog*. Repeat from * to * across row. Next row: Purl Next row: K 2 tog across row

Meet Bitsy Bear!

www.knittingpatterncentral.com

Size is approximately 9” tall.

Using stockinette (knit 1 row, purl 1 row) and garter stitch (knit

every row). Clothes are finished with simple crochet stitches:

single crochet, double crochet and chain. Pieces are joined using

mattress stitch or, if you prefer, backstitch one stitch in from edge.

Gauge: 26 stitches= 4 inches

Materials: Bear-3 oz brown, 1 snap for back of pinafore, 1 bag

polyester fiberfil, Panties-1/2 oz white, Pinafore/Headband- 1 oz

pink, knitting needles size 3 or size needed to knit to gauge,

crochet hook size D (Note: Use whatever size hook that will allow

you to crochet around edges without drawing them up or creating

ripples.)

Abbreviations: K = knit, P = purl, tog = together, inc = increase

(knit in the front and back of the same stitch), st = stitch, YO =

yarn over (yarn forward), sc = single crochet, dc = double crochet,

Ch = chain

Page 9: These knitted toys make a HUGE difference to the …...Meet Harry Bear! Size is approximately 12” tall Materials: Berroco Chinchilla (50grs), 1 ball #5535 Fawn (MC) for bear, 1 ball

Cut yarn leaving a long tail. Thread tail through stitches remaining on needle. Pull up tight and fasten off. Match yarn markers and sew back seam to markers leaving a gap for stuffing. Sew inside leg seams. Fold foot so toes point forward and over sew cast on stitches together.

Stuff firmly. Before closing gap in back seam make sure tummy is firm and rounded. Finish back seam.

Cut a length of brown yarn about 20" long. Starting at back, weave through the stitches of the second row of neck. Pull up

tightly to shape neck. Wrap one end of yarn around neck to cover gathering stitches. Again, pull up tightly. Tie yarn ends in

knot, trim and bury ends in body.

Ear: With brown cast on 8 stitches.

First row: K 1, inc in next st, K to last 2 sts, inc in next st, K 1.

Next row: Purl.

Next row: K 1, inc in next st, K to last 2 sts, inc in next st, K 1. (12 sts)

Starting with a purl row, stockinette 3 rows.

Next row: K 1, K 2 tog, K to last 3 sts, K 2 tog, K 1.

Next row: Purl.

Next row: K 1, K 2 tog, K to last 3 sts, K 2 tog, K 1.

Next row: Purl. (8 sts)

Next row: K 1, inc in next st, K to last 2 sts, inc in next st, K 1.

Next row: Purl.

Next row: K 1, inc in next st, K to last 2 sts, inc in next st, K 1. (12 sts)

Starting with a purl row, stockinette 3 rows.

Next row: K 1, K 2 tog, K to last 3 sts, K 2 tog, K 1.

Next row: Purl.

Next row: K 1, K 2 tog, K to last 3 sts, K 2 tog, K 1. (8sts) Bind off.

Fold ear in half with wrong side together. Over sew row ends. Oversew cast on and bound off stitches together. Sew ear to

top of bear's head. Repeat for second ear.

Muzzle: With brown cast on 12 stitches. First row: Purl

Next row: Inc in first st, K to last st, inc in last st.

Next row: Purl

Next row: Inc in first st, K to last st, inc in last st. (16 sts) Starting with a purl row, stockinette 3 rows.

Next row: K 2 tog, K to last 2 sts, K 2 tog. Next row: Purl

Next row: K 2 tog, K to last 2 sts, K 2 tog. (12 sts)

Next row: Purl. Bind off.

Centre between ears with bottom about 2 rows above increases for head. Sew in place leaving a small gap for stuffing. Stuff

firmly and close gap.

Face: Thread a long darning needle with black yarn. Mark position of eyes with pins. Bring yarn out at one eye position. Put

needle through head up 2 rows in a direct line with first position.

Bring needle out at first position and pull thread through. You have completed one stitch. Make 2 more in the same way. Move to second eye and finish in the same way.

Satin stitch nose to form a V. Nose is made at the top, centre of muzzle. Make mouth with one 1ong stitch coming down from

bottom of nose and 2 long stitches at the bottom of the first, one on each side. (See Picture)

Arm: With brown cast on 9 sts. First row: Inc in every st. (18 sts)

Beginning with a purl row, stockinette 17 rows. Bind off. Make second arm in the same way. Stuff arms firmly. Sew to sides of

bear at shoulder.

Page 10: These knitted toys make a HUGE difference to the …...Meet Harry Bear! Size is approximately 12” tall Materials: Berroco Chinchilla (50grs), 1 ball #5535 Fawn (MC) for bear, 1 ball

Panties: With white cast on 28 stitches. Stockinette 6 rows. Next row: K 2 tog, K to last 2 sts, K 2 tog. Next row: P 2 tog, P to last 2 sts, P 2 tog.

Repeat these 2 rows until you have 2 sts on needle. Starting with a purl row, stockinette 3 rows. Next row: Inc in first st, K to last st, inc in last st. Next row: Inc in first st, P to last st, inc in last st.

Repeat these 2 rows until you have 28 sts on needle. Stockinette 6 rows. Bind off. Sew side seams.

Put on Bitsy pulling up to waist.

Pinafore: With pink cast on 100. Stockinette 4 rows. Next row: K 1, (K 2 tog, YO) across row, end YO, K 1. Starting with a purl row, stockinette 15 rows.

Next row: K 2 tog across row. (50 sts) Next row: Bind off 20 stitches purlwise. Purl across remaining stitches. Next row: Bind off 20 sts knitwise. K across remaining 10 sts. These sts are the pinafore bib. Starting with a purl row, stockinette 7 rows. Bind off.

Finishing: Sew back seam leaving 1& 1/4" open at top. Turn up hem along picots and sew in place. With crochet hook, attach pink yarn to the top left corner of back opening with a slip stitch. Ch 1, sc in same st, sc in each bound off stitch of pinafore waistband until you get to bib.

Sc in row ends of bib to top corner stitch. Ch 51. Turn and sc in 2nd ch from hook and each remaining ch. Sc in each bound off st of bib to corner st. Leave comer st unworked.

Ch 51, turn and sc in 2nd ch from hook and each remaining ch. Sc in comer st. Sc in in the unworked sts of bib and waistband.

Sc down one side of back opening and up the other. End with slip stitch in top of first sc. Fasten off.

Sew snap to top of back opening. Put on Bitsy and tie ties in a bow behind neck.

Headband With pink cast on 60 sts. K1, P 1 rib for 3 rows. Bind off in rib. Oversew ends together.

Bow: With pink cast on 6 sts. Stockinette for 12 rows. Bind off. Gather and tie center of piece to make a bow shape. Attach to

headband.

© Copyright 2002 Yvonne Boucher

Page 11: These knitted toys make a HUGE difference to the …...Meet Harry Bear! Size is approximately 12” tall Materials: Berroco Chinchilla (50grs), 1 ball #5535 Fawn (MC) for bear, 1 ball

Beginning at the top of the head, cast on 40sts and knit 32 rows.

Place a coloured thread in the middle (approximately) of the last row to show where the neck is.

Knit a further 34 rows (total 66 rows)

Put a coloured thread at each end of the last row to show where the body stops and the legs start.

Next row: Knit 20, turn Knit a further 39 rows on these 20 sts. Cast off.

With right side facing, rejoin yarn to the other 20sts and knit 40 rows. Cast off

Arms: Cast on 20sts and knit 40 rows. Cast off.

Making Up: Fold the body in half and sew the back seam from the cast on edge to the row where you placed markers for the top of the legs.

Refold the body so that the seam you just sewed runs down the centre of the back and sew the inside leg and foot seams.

Stuff your teddy lightly and sew the top of the head closed, rounding the corners very slightly.

Sew across the corners of your teddy's head so that the corner points form ears. If you want your ears to stand out like those in the picture, gather around the bottom of each ear and pull slightly.

Gather around the neck on the row where you placed the marker for the neck.

Fold the arm pieces in half and sew the side and one end closed. Stuff very lightly, sew the remaining side closed and sew the arm to the body, just below the neck.

Put a ribbon around the neck and embroider face.

Copyright © Sarah Bradberry

Meet Yarn Teddy Bear!

Designed by Sarah Bradberry

You can knit him/her with any yarn you like, using needles that

give you a very firm gauge so that the filling does not show

through the fabric.

Materials:

“I used 60gm 8 ply (DK) Patons Fireside in dark brown at approx

95m (110 yards) per 50gm ball and 3.25mm needles. My tension

was 26sts and 52 rows to 4 inches over garter st on 3.25mm

needles.”

You can make this bear out of any yarn using needles 2 - 3 sizes

smaller than those you would normally use for your chosen

yarn.

Bear is knit entirely in garter st.

Page 12: These knitted toys make a HUGE difference to the …...Meet Harry Bear! Size is approximately 12” tall Materials: Berroco Chinchilla (50grs), 1 ball #5535 Fawn (MC) for bear, 1 ball

Head side A (make 1) Cast on 10 sts. 1st row (WS) K and inc 1 st at each end of row.

Place marker at last cast off st. 10 sts. 12th row P.

2nd row P. 13th row K. Dec 1 st at each end of next 2 rows.

Inc 1 st at beg of 3rd, 5th, 7th and 9th rows. 16 sts. Cast off rem 6 sts, working p2tog at each end of cast off row.

10th row P. 11th row Cast off 6 sts, k to end.

Head side B (make 1) Cast on 10 sts. 1st row (RS) P and inc 1 st at each end of row.

12th row K. 13th row P.

2nd row K. Inc 1 st at beg of 3rd, 5th, 7th and 9th rows. 16 sts.

Dec 1 st at each end of next 2 rows.

10th row K. 11th row Cast off 6 sts, p to end. Cast off rem 6 sts, working k2tog at each end of cast off row.

Place marker at last cast off st. 10 sts.

Head gusset Beg at back of neck, cast on 3 sts. 1st row P. Inc 1 st at each end of 2nd, 6th and 10th rows.

5 sts. Place marker at each end of last row.

9 sts. Beg with a p row, work 13 rows in rev st-st, so ending with a p row.

Work 5 rows rev st-st.

Shape nose Dec 1 st at each end of next 2 rows. Cast off working p2tog at each end of cast off row.

Ears (make 2) Cast on 7 sts, work 4 rows in g-st. Next row K2tog at each end of row.

Cast off working k2tog at each end of cast off row.

Body front (make 1) Cast on 4 sts. 1st row (WS) K and inc in every st. 8 sts. P 1 row. P 1 row.

Shape chest 25th row K2tog, k8, [k2tog] twice, k8, k2tog. 20 sts. P 1 row.

Meet Teddy Bear with Cardigan!

www.prima.co.uk

Size is approximately 15cm.

Knit this smart bear, in his own knitted jacket, which can be

taken off.

The teddy bear knitting pattern is worked in reverse stocking

stitch, with garter-stitch ears, and you'll need just two balls of

yarn. The bear is worked in reverse stocking stitch throughout –

P all RS rows and K all WS rows, except ears which are worked in

garter st – K every row.

Materials:

Patons Diploma 4 ply – One 50g ball in each of Natural and

Denim

Pair 2¾mm knitting needles

2 x 4mm black beads or loop-back eyes

Washable polyester toy stuffing

Black or brown embroidery thread

2 small buttons and optional press fasteners

Page 13: These knitted toys make a HUGE difference to the …...Meet Harry Bear! Size is approximately 12” tall Materials: Berroco Chinchilla (50grs), 1 ball #5535 Fawn (MC) for bear, 1 ball

3rd row K and inc in every st. 16 sts. P 1 row. 5th row K7, inc in next 2 sts, k7. 18 sts. **

27th row K8, [k2tog] twice, k8. P 1 row.

7th row K8, inc in next 2 sts, k8. 20 sts. P 1 row. 9th row K9, inc in next 2 sts, k9. 22 sts. P 1 row.

29th row K2tog, k5, [k2tog] twice, k5, k2tog. 14 sts. P 1 row.

11th row K10, inc in next 2 sts, k10. 24 sts. Work 13 rows in rev st-st so ending with a p row.

31st row K2tog, k3, [k2tog] twice, k3, k2tog. 10 sts. Cast off purlwise.

Work as Body Front to **. Work 9 rows in rev st-st.

27th row K2tog, k5, [k2tog] twice, k5, k2tog. 14 sts. P 1 row.

Shape lower back 15th row K7, [k2tog] twice, k7. 16 sts. Work 3 rows rev st-st.

29th row K5, [k2tog] twice, k5. 12 sts. P 1 row. 31st row K2tog, k2, [k2tog] twice, k2, k2tog. 8 sts.

19th row K7, inc in next 2 sts, k7. 18 sts. Work 7 rows in rev st-st.

Cast off purlwise.

Arms (make 2) Cast on 3 sts. Shape paws 1st row K and inc in every st. 6 sts. P 1 row.

15th row K and inc 1 st at each end of row. 14 sts. Work 7 rows rev st-st.

3rd row Inc in 1st st, k1, inc in next 2 sts, k1, inc in last st. 10 sts. P 1 row.

23rd row K2tog, k to last 2 sts, k2tog. P 1 row.

5th row K and inc 1 st at each end of row. 12 sts. P 1 row. 25th row K2tog, k2, [k2tog] twice, k2, k2tog.

7th row Inc in 1st st, k3, [k2tog] twice, k3, inc in last st. P 1 row. Rep the last 2 rows once more. Work 4 rows rev st-st.

Cast off purlwise, slipping the first st.

Legs (make 2) Cast on 22 sts. Beg with a K row, work 2 rows. Dec 1 st at each end of next 2 rows. 18 sts.

7th row Inc in 1st st, k5, inc in next st, k5, inc in last st. 16 sts. Work 9 rows in rev st-st.

5th row K2tog, k6, k2tog, k6, k2tog. 15 sts. 17th row K2tog, k4, [k2tog] twice, k4, k2tog. 12 sts. P 1 row.

6th row P2tog, p11, p2tog. 13 sts. Cast off working k2tog at each end of cast off row.

Soles (make 2) Cast on 3 sts. 1st row K and inc 1 st at each end of row. 5 sts. Work 9 rows in rev st-st. 11th row K2tog, k1, k2tog.

Cast off purlwise, slipping first st.

To make up: Make sure purl side is the right side. Press all pieces. With purl sides together, and using a tiny backstitch, join front and back body pieces together all around from back neck to front neck.

Sew up legs and arms and stuff, then pinning in place to body, sew on limbs, passing thread through body several times so arms and legs appear to be jointed.

Turn through and stuff through neck opening, do not close seam.

Sew the ears to the head, curving slightly.

Join head side pieces from tip of nose to chin. Insert head gusset, matching markers (these are approximate eye positions), stuff head, moulding as you go, stuffing nose firmly first. Leave neck edge open.

Sew the bead eyes to the head, sinking them in to the face by pulling the threads towards the back of the head and securing.

Join head to body around neck edge, adding more stuffing as you work. Tie a length of yarn around neck, pull up but not too tightly, fasten off.

Embroider a small nose, mouth and claws.

For the jacket - (Worked in g-st throughout) Right front Cast on 10 sts. 1st row K and inc 1 st in first st. K 7 rows, ending at front edge. Shape underarm 9th row K and inc in last st. 10th row K and inc in first st. 11th row As 9th row. 14 sts. K 5 rows, ending at front edge. Shape front 17th row K1, k2tog, k to end. K 3 rows. Rep the last 4 rows twice more. Cast off rem 11 sts.

Back Cast on 20 sts. K 8 rows. Shape underarm 9th, 10th and 11th rows K and inc 1 st at each end of row. 26 sts. K 14 rows. Shape back neck 26th row K11, cast off 4 sts, k to end. Shape right shoulder Next row K to last 2 sts, k2tog. K 1 row. Cast off.

Page 14: These knitted toys make a HUGE difference to the …...Meet Harry Bear! Size is approximately 12” tall Materials: Berroco Chinchilla (50grs), 1 ball #5535 Fawn (MC) for bear, 1 ball

Left front Cast on 10 sts. 1st row K and inc 1 st in last st. K 7 rows, ending at side edge. Shape underarm 9th row K and inc in first st. 10th row K and inc in last st. 11th row As 9th row. 14 sts. K 5 rows, ending at side edge. Shape front 17th row K to last 3 sts, k2tog, k1. K 3 rows. Rep the last 4 rows twice more. Cast off rem 11 sts.

Shape left shoulder Next row Rejoin yarn to neck edge and dec 1 st at beg of row. K 1 row. Cast off.

To make up: Do not press. Join shoulder and underarm seams. Dress the bear, overlap the jacket fronts slightly and sew buttons through both layers.

If you want to undo the jacket, sew buttons to one front and press fasteners to correspond with buttons.

Page 15: These knitted toys make a HUGE difference to the …...Meet Harry Bear! Size is approximately 12” tall Materials: Berroco Chinchilla (50grs), 1 ball #5535 Fawn (MC) for bear, 1 ball

Body: Make 2 pieces, beg at shoulders. With 3mm needles, cast on 22 sts. K 10 rows.

Next row K1, skpo, k11, k2tog, skpo, k11, k2tog, k1. 28 sts. K 1 row. Next row K1, skpo, k9, k2tog, skpo, k9, k2tog, k1. 24 sts. K 1 row.

Cont in garter st and inc 1 st at each end of next row and 6 foll 6th rows. 36 sts. K 7 rows. Shape base Next row K1, skpo, k13, k2tog, skpo, k13, k2tog, k1. 32 sts. K 1 row.

Cont to dec 4 sts on every alt row in this way until 8 sts rem. K 1 row. Next row K1, sk2togpo, k3tog, k1. 4 sts. Next row [K2tog] twice. Next row K2tog and fasten off.

Head: Make 1 piece. With 3mm needles, cast on 32 sts. K 2 rows. Next row [Kfb, k6, kfb] 4 times. 40 sts. K 1 row. Next row [Kfb, k8, kfb] 4 times. 48 sts. K 1 row. Next row [Kfb, k10, kfb] 4 times. 56 sts. K 30 rows.

Next row [Skpo, k2, k2tog] 4 times. 16 sts. K 1 row. Next row [Skpo, k2tog] 4 times. 8 sts. K 1 row. Next row [Skpo, k2tog] twice.

Shape top Next row [Skpo, k10, k2tog] 4 times. 48 sts. K 1 row. Next row [Skpo, k8, k2tog] 4 times. 40 sts. K 1 row. Next row [Skpo, k6, k2tog] 4 times. 32 sts. K 1 row. Next row [Skpo, k4, k2tog] 4 times. 24 sts. K 1 row.

4 sts. Break yarn, thread through rem sts, pull up and secure.

Snout: Make 1 piece. With 3mm needles, cast on 36 sts. K 10 rows. Next row * K1, k2tog; rep from * to end. 24 sts. K 1 row. Next row [K2tog] to end. 12 sts. K 1 row.

Break yarn, thread through sts, pull up and secure.

Legs: Make 2 pieces. With 3mm needles, cast on 8 sts. K 20 rows for the Sole. Shape foot Cont in garter st and cast on 14 sts at beg of next 2 rows. 36 sts. K 6 rows. Dec 1 st at beg of next 10 rows. 26 sts. K 30 rows.

Next row K3, skpo, k2tog, k4, skpo, k2tog, k3. 14 sts. K 1 row. Next row K2, skpo, k2tog, k2, skpo, k2tog, k2. 10 sts. K 1 row. Next row K1, skpo, k2tog, skpo, k2tog, k1. 6 sts.

Shape top Next row K5, skpo, k2tog, k8, skpo, k2tog, k5. 22 sts. K 1 row. Next row K4, skpo, k2tog, k6, skpo, k2tog, k4. 18 sts. K 1 row.

Next row [K2tog] 3 times. Next row K3tog and fasten off.

Arms: Make 2 pieces. With 3mm needles, cast on 4 sts. K 1 row. Next row [Kfb] 3 times, k1. 7 sts. K 1 row. Next row [Kfb] 6 times, k1. 13 sts. K 1 row. Next row [Kfb] 12 times, k1. 25 sts. K 36 rows.

Next row K2tog tbl, k4, k2tog, k1, k2tog tbl, k4, k2tog. 13 sts. K 1 row. Next row K2tog tbl, k2, k2tog, k1, k2tog tbl, k2, k2tog. 9 sts. K 1 row. Next row K2tog tbl, k2tog, k1, k2tog tbl, k2tog. 5 sts. K 1 row.

Meet Teddy Bear for Peace!

http://www.knitforpeace.org.uk/wp-

content/uploads/2014/06/Teddy-Bear2.pdf

Size approximately 30cm tall.

Materials: Two 50g balls Debbie Bliss baby cashmerino in Stone 102.

1 pair of 3mm knitting needles. Washable toy stuffing. Black felt and

matching sewing thread.

Tension 27 sts and 56 rows to 10cm square over garter st using 3mm

needles.

Abbreviations: alt alternate; beg beginning; cm centimetres; cont

continue; dec decrease; inc increase; k knit; kfb k into front and back

of next st; rem remaining; rep repeat; skpo sl 1, k1, pass slipped st

over; sk2togpo slip 1, k2tog, pass slipped st over; st(s) stitch(es); tbl

through back loop; tog together.

Page 16: These knitted toys make a HUGE difference to the …...Meet Harry Bear! Size is approximately 12” tall Materials: Berroco Chinchilla (50grs), 1 ball #5535 Fawn (MC) for bear, 1 ball

Shape top Next row K2tog tbl, k8, k2tog, k1, k2tog tbl, k8, k2tog. 21 sts. K 1 row. Next row K2tog tbl, k6, k2tog, k1, k2tog tbl, k6, k2tog. 17 sts. K 1 row.

Next row K2tog tbl, k1, k2tog. 3 sts. Next row K3tog and fasten off.

Ears: Make 2 pieces. With 3mm needles, cast on 13 sts. K 4 rows. Dec 1 st at each end of next row and 3 foll alt rows. 5 sts. K 1 row.

Inc 1 st at each end of next row and 3 foll alt rows. 13 sts. K 4 rows. Cast off.

To Make Up: Join 2 body pieces together, leaving cast on edges (shoulders) open. Evenly fill with stuffing, then join seam. Join back seam in head, leaving neck (cast on edge) open. Evenly fill with stuffing.

Evenly fill with stuffing, position on body and sew in place. Join arm seam, leaving top open, evenly fill with stuffing, position on body and sew in place.

Join snout seam, leaving cast on edge open. Position and sew onto head, stuffing lightly. Sew base of head onto shoulders. Fold each ear in half, position on head and sew in place. Join front seam of each leg, then sew sole in place, so leaving top of leg open.

Cut two small circles from black felt for eyes and one quarter circle for the nose, then sew in place.