Thermostatic Steam T raps efficient and cost effective ... sarco/thermostaticbrochure.pdf ·...
Transcript of Thermostatic Steam T raps efficient and cost effective ... sarco/thermostaticbrochure.pdf ·...
ThermostaticSteam Traps
efficient and cost effective steam trapping solutions for industrial process,HVAC equipment and steam tracing lines
2
Efficient thermostatic steam trapsreduce startup times and improve overall efficiency
For more than 85 years, Spirax Sarco hasbeen the world’s leader in thermostatic steamtrap development. The thermostatic operationadjusts automatically to varying steam pressuresand has excellent air venting characteristics.These air venting characteristics are essential toa quick and efficient start-up and also a smoothuninterrupted operation.
In addition to balanced pressure thermostaticsteam traps, Spirax Sarco also offers bimetallicthermostatic steam traps. The unique multi-crossbimetallic element used in this range dictates thatthey follow the steam saturation curve over widepressure ranges.
Spirax Sarco’s range of balanced pressure andbimetallic thermostatic steam traps are offeredwith built-in strainers and are resistant to water-hammer and freezing. In addition, these traps aredesigned to be serviced without removal fromthe piping for ease of maintenance.
These traps are ideal for applications in whichsome condensate subcooling is permissible oreven desirable.
Thermostatic Steam Trap OverviewModel Sizes (inches) Connections Pipe Configuration Body Material
1/43/8
1/23/4 1 NPT SW FLG Angle In-Line Brass Cast Dctl. Steel Stn.
Iron Iron Steel
BALANCED PRESSURE
TA-125 ✓ ✓ ✓ ✓ ✓ ✓TH-25 ✓ ✓ ✓ ✓TH-125 ✓ ✓ ✓ ✓ ✓TV-125 ✓ ✓ ✓ ✓ ✓
T250 ✓ ✓ ✓ ✓ ✓ ✓ ✓TM600 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
BPM21L ✓ ✓ ✓ ✓ ✓ ✓BPT21 ✓ ✓ ✓ ✓ ✓ ✓ ✓BPT30 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
TSS300 ✓ ✓ ✓ ✓ ✓MST18 ✓ ✓ ✓ ✓ ✓
SBP30 ✓ ✓ ✓ ✓ ✓ ✓UBP30 ✓ ✓ ✓ ✓ ✓ ✓ ✓
BT6 ✓ ✓ ✓ ✓* ✓ ✓BTM7 ✓ ✓ ✓ ✓ ✓*† ✓ ✓BTS7 ✓ ✓ ✓ ✓ ✓† ✓ ✓
BIMETALLIC
SM21 ✓ ✓ ✓ ✓ ✓ ✓ ✓SM24H ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓SM45 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓SSM21 ✓ ✓ ✓ ✓ ✓
TIS#
2.0101
2.0092.003
2.0142.0042.005
2.00012.002
2.00612.008
2.0002.00022.0002
2.1002.1022.1032.104
Both angle and in-lineconnections available for
piping convenience.
Variety of body materialsavailable to meet a multitude
of requirements.
Patented capsule designis resistant to corrosion
and waterhammer.
Bimetallic element is alsoresistant to superheat
* Available with Tri-Clamp® compatible sanitary clamp ends.† Available with O.D. Tube ends.
3
Stainless steel construction for long life.
Reduces start-up time and increases operatingefficiency with excellent air handling ability.
Adjusts automatically to varyingsteam pressures.
High resistance to superheat on somemodels widens the range of applications.
Replaceable element/valve connectionis easily interchanged without disturbing
the piping connections.
Reduces installation space requirements andminimizes radiant heat loss with compact design.
User benefits
✓
✓
✓
✓
✓
✓
Ideal for freezing environments.✓
1 2 3
How the balanced pressure element worksThe stainless steel thermostatic element is filled
with a liquid which boils a few degrees below sat-urated steam temperature at any given operatingp re s s u re. When the liquid fill boils, the pre s s u reinside the element increases, the element expands,f o rcing the valve head on the seat to close the trap.
When the trap is cold, the valve is wide open.The equipment can warm up rapidly because theair which initially fills the steam space and thestart-up load of cool condensate are discharg e dquickly (1). As the equipment warms up, the tem-p e r a t u re of the condensate passing through thetrap increases. When the condensate temperaturea p p roaches saturated steam temperature, the ele-ment’s liquid fill boils, closing the trap before anysteam is lost (2). The trap remains closed until thecondensate waiting to be discharged has cooleds u fficiently to allow the element’s fill to condense.The trap then opens and the cycle is repeated (3).
The trap automatically adjusts to variations insteam pre s s u re, so that the amount of subcoolingremains constant. Subcooling refers to the degre e sthe condensate must cool below saturated steamt e m p e r a t u re before the trap opens.
Y-pattern strainers availableto meet plant maintenance
requirements.
4
SterilizersFor effective operation, the
sterilizer must be kept completelyfree of condensate and air. (Anair-steam mixture has a lowertemperature than pure steam.)
Because of its excellent air-handling ability and compact size,
a balanced pressure trap with a“near to steam” capsule is the best
choice for small sterilizers.Depending on the configurationof the steam space, a separate air
vent may be advantageous.
Jacketed kettlesBalanced pressure thermostatic
steam traps are particularly suitedfor batch-type processes because
the air which initially fills the steamspace is quickly discharged
through the wide open steam trap.A separate thermostatic air ventinstalled opposite the steam inlet
will discharge air which may collectin the top of the jacket.
Steam radiators and convectorsSpirax Sarco brass-bodied radiator traps have maleunion inlet fittings to simplify direct connection to
steam radiators and convectors. The stainless steel weld-ed bellows, valve head and seat can be replaced easily
and quickly without disturbing the piping connections.
Steam tracing linesFor non-critical steam tracing
applications, a trap with a sub-coolingcapsule will make use of some of thesensible heat in the condensate beforeit is discharged. For critical applica-tions a trap which operates close to
steam temperature should be selected.
Steam Trap Selection and SizingNeed to Know
1. The steam pressure at the trap after any pressure drop through the control valve or equipment.
2. The distance the condensate must be lifted after the trap.Rule of thumb: 2 feet of lift equals 1 psi back pressure (approximately).
3. Any other possible sources of back pressure in the condensate return system. For example:• Condensate taken to a pressurized deaerator tank or flash
recovery vessel.• Local back pressure due to discharge of numerous traps close
together into an undersized return.
4. Quantity of condensate handled. Obtained from:• Measurement • Calculation • Manufacturer’s data
5. Safety Factor that is dependent upon particular application, typical examples as follows:Steam Mains 2:1Tracers 2:1Non-Modulating 2:1Modulating over 30 psi 3:1Modulating under 30 psi Size trap at full load and 1/2 psi
differential
Rule of thumb: Use a factor of 2 on everything except Temperature ControlledAir Heater Coils and Converters, and Siphon Applications
How to SizeThe difference between the steam pressure at the trap inlet and the totalback pressure, including that due to lift after the trap, is the differentialpressure. The quantity of condensate should be multiplied by the appro-priate safety factor to produce the sizing load. The trap may now beselected using the differential pressure and the sizing load.
Note: The inlet pressure to the steam trap should never exceed theMaximum Operating Pressure (PMO) of the selected trap, regardless ofdifferential pressure.
ExampleA steam trap is required to drain 150 lb/h of condensate from a jacketedkettle which uses steam at 100 psig. There will be a lift after the trap of 30 ft.
Inlet Pressure 100 psigLift 30 ft. = 15 psi (approximately)
Therefore,Differential Pressure 100 psi - 15 psi = 85 psi
Quantity 150 lb/hSafety Factor 2:1
Sizing Load 300 lb/h
The BPT21Y will easily handle 300 lb/h at a differential pressure of 85 psi.
Typical applications for thermostatic steam traps
5
Sizes 1/2", 3/4", 1"Body Material Cast IronConnections NPTPiping Configuration Angle or In-LineOptions N/ATIS# 2.009MaximumOperating 250 psigPressure (PMO)
T250
T250
The balanced pressurethermostatic T250 steamtrap is a rugged cast ironproduct suitable for highcapacity process applica-tions. The cast iron bodyand thermostatic designmake it a good choice foroutdoor applicationswhere freezing is aconcern. All internalparts can be servicedwithout removing thetrap from the pipeline.
TM600
The balanced pressurethermostatic TM600steam trap is a mediumcapacity, high pressuretrap suitable for steammain drips and processequipment. The durabledesign is ideal foroutdoor applicationssubject to freezing. Avariety of flow patterns(angle, in-line horizontalor vertical) are availablefor piping convenience.
Model TM600 TM600L TM600NSizes 1/2", 3/4"Body Material Ductile IronConnections NPTPiping Configuration Angle In-LineOptions SW or FlangedTIS# 2.003MaximumOperating 600 psigPressure (PMO)
TM600
Differential Pressure, psi
TM600 Capacities5000
60040030020015010040 50302010
4000
3000
2500
2000
1500
1000
700
500
300
Differential Pressure, psi
T250 Capacities100,000
1 0 , 0 0 0
1,000
100200100 250101
A A
B B
CC
DD
A n g l e S t r a i g h t w a y
TM600N TM600TM600L
Dimensions (nominal) in inches
Size Type A B C D Weight1/2" & 3/4" A n g l e 1.75 1.75 3.12 4.56 3.5 lb1/2" Straightway 1.75 1.75 3.12 5.37 4.3 lb3/4" Straightway 1.87 1.75 3.12 5.37 4.3 lb1" Angle 2.12 2.25 3.9 5.37 6.0 lb
Dimensions (nominal) in inches
T y p e A B C D W e i g h tT M 6 0 0 N – 1 . 0 6 4.25 (SW), 5.25 (Scr.) 6 . 0 6 9.25 lbTM600 & TM600L 2 . 0 2 . 8 4 . 2 6 . 2 5 7.0 lb
A
B
C
D
B
C
D
6
Differential Pressure, psi
TA, TH, TV Capacities
TA, TH, TV
These brass bodied balanced pressure thermostatic steam trapsare available with a variety
of flow and connection optionsmaking them ideal for two-pipe
heating systems, radiators,convectors, sterilizers
and other smallprocess equip-m e n t .The weldedstainless steelelement self-adjusts over theentire operating
BPM21L
The BPM21L is a low profilebalanced pressurethermostaticsteam trap idealfor steam tracers,hospital equip-ment, radiators,and main drips.The balancedpressure capsuledesign providesgood resistanceto waterhammerand moderate super-
Sizes 3/8", 1/2"Body Material Forged SteelConnections NPTPiping Configuration In-LineOptions SW Connections (1/2" only)TIS# 2.014MaximumOperating 305 psigPressure (PMO)
BPM21L
Capacity Condensate 20˚F (11˚C) below steam temperature
60005000
4000
3000
2000
1500
1000
700
500
400
300
200
150
10010070 1255030201510754321
1"
3/4"
Differential Pressure, psi
BPM21L Capacities
1500
1000
700
500
400
300
200
150
200 30030 50 100201052
Model TA-125 TH-25 TH-125 TV-125Sizes 1/2", 3/4", 1" 1/2" 1/2", 3/4"Body Material BrassConnections NPT-Male union inletPiping Configuration Angle Horizontal VerticalOptions Extended male inlet spud (1/2", 3/4" TA-125 only)
TIS# 2.0101Maximum Operating 125 psig 25 psig 125 psigPressure (PMO)
T-Series Radiator Traps
A*
D
B
C
A
D
F
G
D
E
C
B
1/2", 3/4"TV-125
1/2" TH-251/2", 3/4" TH-125
TA-125
Dimensions (nominal) in inches
Size T y p e P a t t e r n A B C D E F G W e i g h t1/2" T A - 1 2 5 A n g l e 2 . 8 * 1 . 2 1 . 0 1 . 9 – – – 1 lb1/2" T H - 2 5 S t r a i g h t 3 . 2 5 – 1 . 6 2 . 0 1 . 7 5 0 . 6 0 . 6 1.3 lb1 / 2 " T H - 1 2 5 S t r a i g h t 3 . 2 5 – 1 . 2 5 2 . 0 1 . 4 0 . 6 0 . 6 1.4 lb1 / 2 " T V - 1 2 5 V e r t i c a l – 5 . 1 – 2 . 0 – – – 1.6 lb3 / 4 " T A - 1 2 5 A n g l e 3 . 1 * 1 . 2 5 1 . 0 1 . 9 – – – 1.3 lb3 / 4 " T H - 1 2 5 S t r a i g h t 3 . 2 5 – 1 . 2 5 2 . 0 1 . 4 0 . 8 1 . 1 1.8 lb3 / 4 " T V - 1 2 5 V e r t i c a l – 5 . 6 – 2 . 0 – – – 2 lb1 " T A - 1 2 5 A n g l e 3 . 5 2 . 0 1 . 7 5 2 . 0 – – – 2.8 lb
* With optional extended inlet spud, “A” dimension is 3.25"
A
B
C
D
E withdrawal distance
Dimensions (nominal) in inches
Size A B C D E Weight3/8", 1/2" 2.75 2.4 1.4 .6 .4 2.0 lb
1/2"
7
BPT21
The BPT21 is a versatile balancedpressure thermostatic steam trapsuitable for steam main dripstations, hospital, laundry,kitchen equipment, and steamtracing lines. The unit is availablewith or without a strainer andwith various end connectionsfor maximum flexibility. Thebalanced pressure capsuledesign is good waterhammerand moderate superheatresistance.
BPT 30
The BPT30, like the BPT21, isa balanced pressure thermostaticsteam trap available with or with-out a strainer and with various endconnections. The advantage of theBPT30 is its maximum operatingpressure of 435 psig. This makes itsuitable for medium pressure maindrips, steam tracing systems, andprocess equipment. The balancedpressure capsule design is selfadjusting over the entire operatingpressure range.
Model BPT21LC, BPT21HC, BPT21YLC, BPT21YHC
Sizes 1/2", 3/4"Body Material Forged SteelConnections NPTPiping Configuration In-Line
SW connections, ANSI 150 & 300, Options Subcooling capsule filling, 1/4" plugs
for strainer blowdown & trap testingTIS# 2.004MaximumOperating 304 psigPressure (PMO)
BPT21Model B P T 3 0 L C B P T 3 0 H C B P T 3 0 Y L C B P T 3 0 Y H CSizes 1/2", 3/4" 1" 1/2", 3/4" 1"Body Material Forged SteelConnections NPTPiping Configuration In-Line
SW connections, ANSI 150 & 300, Options Subcooling capsule filling, blowdown
valve for BPT30Y & trap testingTIS# 2.005MaximumOperating 435 psigPressure (PMO)
BPT30
Differential Pressure, psi
BPT21/30, BPT21Y/30Y Capacities
150 30020010050 70403020
6000
5000
4000
3000
2000
1000
800
600
500
400
300
HC
LC
400
AB
C
D
E
H
J
E
D
withdrawaldistance
BPT21 BPT21Y
withdrawaldistance
A
B
C
D
H
D
EJ
E
BPT30 BPT30Y
OptionalBlowdown
Valve
withdrawaldistance
Dimensions (nominal) in inches
W e i g h tSize T y p e A B C D E H J S c r / S W F l g d
1/2" B P T 2 1 3 . 4 5 . 9 2 . 9 2 . 5 0 . 8 3 1 . 4 – 3 lb 6.8 lb
3/4" B P T 2 1 3 . 4 5 . 9 2 . 9 2 . 6 0 . 9 8 1 . 4 – 3.5 lb 7.3 lb
1/2" B P T 2 1 Y 3 . 4 5 . 9 2 . 9 2 . 5 2 . 0 1 . 4 3 . 0 3.5 lb 5.9 lb
3/4" B P T 2 1 Y 3 . 4 5 . 9 2 . 9 2 . 6 2 . 0 1 . 4 3 . 0 3.9 lb 6.4 lb
Dimensions (nominal) in inches
W e i g h tSize T y p e A B C D E H J S c r / S W F l g d
1 / 2 " B P T 3 0 3 . 7 5 . 9 3 . 2 3 . 9 0 . 6 7 1 . 5 – 4.8 lb 7.9 lb
3 / 4 " B P T 3 0 3 . 7 5 . 9 3 . 2 3 . 9 0 . 7 9 1 . 5 – 5.1 lb 9.0 lb
1 " B P T 3 0 3 . 7 6 . 3 3 . 2 3 . 9 1 . 1 1 . 5 – 5.3 lb 10.1 lb
1 / 2 " B P T 3 0 Y 3 . 7 5 . 9 3 . 2 3 . 8 3 . 1 1 . 5 * 5 . 0 7 lb 10.3 lb
3 / 4 " B P T 3 0 Y 3 . 7 5 . 9 3 . 2 3 . 8 3 . 1 1 . 5 * 5 . 0 7 lb 11.9 lb
1 " B P T 3 0 Y 3 . 7 6 . 3 3 . 2 3 . 8 3 . 1 1 . 5 * 5 . 0 7.3 lb 12.8 lb* With Blowdown valve add 1.06"
8
TSS300
The TSS300 is a lowcapacity, low profilebalanced pressurethermostatic steam trapideal for critical andnon-critical steam tracingsystems. The weldedstainless steel elementself adjusts to varyingoperating pressures. Itcan be installed in eitherhorizontal or verticalpiping for addedflexibility.
MST18
Like the TSS300,the MST18 is a lowcapacity, low profilebalanced pressurethermostatic steamtracer trap. Theadded benefit of theMST18 is the abilityto service easily. Thewelded stainless steelcapsule self adjuststo accommodatevarying pressures.
Sizes 3/8", 1/2"Body Material Stainless SteelConnections NPTPiping Configuration In-LineOptions Strainer Screen (1/2" only)TIS# 2.0001MaximumOperating 300 psigPressure (PMO)
TSS300Sizes 1/4", 1/2"Body Material Stainless SteelConnections NPTPiping Configuration In-LineOptions N/ATIS# 2.002MaximumOperating 261 psigPressure (PMO)
MST18
Differential Pressure, psi
TSS300 Capacities
100 30020050 701075 3020
1000
800
600
500
400
300
200
100
70
Differential Pressure, psi
MST18 Capacities
100 200403020 50
1000900
800
700
600
500
400
300
200
Dimensions (nominal) in inches
Size A B Weight3/8", 1/2" 2.5 1.5 0.7 lb
B
A
Dimensions (nominal) in inches
Size A B Weight1/4" 2.0 1.8 0.88 lb1/2" 2.5 1.8 0.95 lb
B
A
9
SBP30LC
The SBP30LC is asealed stainless steelbalanced pressurethermostatic steamtrap ideal for steamtracing systems, maindrips, and kitchen andhospital equipment.The balancedpressure capsulehas good resistanceto waterhammerand moderatesuperheat.
UBP30
The UBP30 joins the sealed thermostatic steam trap withSpirax Sarco’s popular swivel connector. The result is abalanced pressure thermostatic steamtrap with the flexibility of beinginstalled in either a vertical orhorizontal line. The conveniencein piping and repair make itideal for low capacity processsystems as well assteam tracingsystemsandsteammaindrips.
Sizes 1/2", 3/4"Body Material Stainless SteelConnections NPTPiping Configuration In-LineOptions SW and BSP connections,
subcooling capsuleTIS# 2.0061MaximumOperating 261 psigPressure (PMO)
SBP30LCSizes 1/2", 3/4", 1"Body Material Stainless SteelConnections NPTPiping Configuration In-LineOptions SW and BSP connections,
subcooling capsuleTIS# 2.008MaximumOperating 435 psigPressure (PMO)
UBP30
Differential Pressure, psi
UBP30 Capacities
2000
1000
800
600
500
400
300
400300150 20010040 50 60 803020
Differential Pressure, psi
SBP30LC Capacities
400300150 20010040 50 703020
3000
2000
1000
800
600
500
400
300
Dimensions (nominal) in inches
Size A B C D Weight1/2" 2.4 3.2 2.2 2.5 3.5 lb3/4" 2.8 3.1 2.2 2.5 3.8 lb1" 3.5 3.2 2.2 2.5 4.2 lb
C
B
D
A
AC
B
D
A
Dimensions (nominal) in inches
Size A B C D Weight1/2", 3/4" 3.1 2.5 2.2 0.74 2.2 lb
10
Differential Pressure, psi
SM21, SM21Y Capacities
2000
1000
800
600500
400
300
30020010040 60 803020
200
10080
60
98 10
Differential Pressure, psi
SM24H Capacities8000700060005000
4000
3000
2000
30020010040 803020
1000
800
600
500
8 10 50
400
300
SM21, SM21Y
The SM21 is a low capacitybimetalic thermostaticsteam trap ideal for non-critical steam tracingand processsystems. Thebimetallicelement is self-adjusting overthe operatingpressure range.The SM21 is avail-able in a variety ofend connectionsfor maximum pip-ing convenience.
Sizes 1/2"& 3/4"Body Material Forged SteelConnections NPTPiping Configuration In-LineOptions SW, ANSI 150 & 300
Connections, 1/4" tappings
TIS# 2.100PMO 300 psig
SM21, SM21Y
SM24H
The SM24H is abimetallic thermostaticsteam trap that can befound in high pressuresteam main drips,non-critical tracingand high pressureprocess systems.This steam trap isavailable withthreaded, socketweld, or flangedconnections forpiping convenience.
Sizes 1/2", 3/4", 1"Body Material Forged SteelConnections NPTPiping Configuration In-LineOptions SW, ANSI 150 & 300
Connections, 1/4" tappings
TIS# 2.102PMO 350 psig
SM24H
Dimensions (nominal) in inchesWeight
Size T y p e A B C D E F G S c r / S W F l g d1/2" SM21 3.4 5.9 2.9 2.5 0.83 1.4 – 3.2 lb 6.8 lb3/4" SM21 3.4 5.9 2.9 2.6 0.98 1.4 – 3.5 lb 7.3 lb1/2" SM21Y 3.4 5.9 2.9 2.5 2.0 1.4 1.0 3.6 lb 5.9 lb3/4" SM21Y 3.4 5.9 2.9 2.6 2.0 1.4 1.0 3.9 lb 6.4 lb
Dimensions (nominal) in inchesWeight
Size A B C D E F Scr/SW Flgd1/2" 3.7 5.9 3.2 3.8 0.67 2.2 4.5 lb 7.9 lb3/4" 3.7 5.9 3.2 3.8 0.79 2.2 5.1 lb 9.0 lb1" 3.7 6.3 3.2 3.8 1.1 2.2 5.2 lb 9.1 lb
AB
C
D
E
F
SM21 SM21Y
withdrawaldistance
G
D
E
withdrawaldistance
A
B
C
D
E
Fwithdrawaldistance
11
Differential Pressure, psi
SM45 Capacities
500300200100503020108
20000
100008000
600050004000
3000
2000
1000800
600500400
300
200
Differential Pressure, psi
SSM21 Capacities
2000
1000
800
600500400
300
200
100
80
60
8 910 20 30 40 60 80 100 200 300
SM45
The SM45 is SpiraxSarco’s highest pressurebimetalic thermostaticsteam trap. The ruggedcast steel designcan handle steampressures to 650 psigand temperaturesto 842˚F. On highpressure steammains, wheresome subcoolingis acceptable, theSM45 providesefficient drainage.
Sizes 1/2", 3/4", 1", 11/2"Body Material Cast SteelConnections SWPiping Configuration In-LineOptions NPT, ANSI 150 & 300
Connections
TIS# 2.103PMO 650 psig
SM45
SSM21
The SSM21 is asealed bimetallicthermostatic steamtrap suitable fornon-critical tracingwhere subcoolingof condensate ispermissible.
Sizes 1/2"Body Material Stainless SteelConnections NPTPiping Configuration In-LineOptions N/A
TIS# 2.104PMO 304 psig
SSM21
Dimensions (nominal) in inches Weight
Size A A1 C D E H Scr/SW Flgd1/2" 5.1 8.3 4.0 5.4 0.95 4.3 12.6 lb 16.0 lb3/4" 5.1 9.1 4.0 5.4 0.95 4.3 13.7 lb 19.0 lb1" 5.1 9.1 4.0 5.4 0.95 4.3 13.7 lb 21.0 lb1-1/2" 5.9 10.2 4.0 5.7 1.2 4.5 14.0 lb 30.0 lb
Dimensions (nominal) in inches
A B Weight2.9 3.7 1.0 lb
A
C
D
E
Hwithdrawaldistance
A1 A
B
Steam Trap Selection Guide
Regional Offices
Spirax Sarco, Inc.1150 Northpoint Blvd.Blythewood, SC 290161 - 8 0 0 - 8 8 3 - 4 4 1 1w w w . s p i r a x s a r c o . c o m / u s
Printed in USA 9/96. Copyright 1996 Spirax Sarco, Inc.
As the USA’s leading provider of steam system solutions, Spirax Sarco recognizes that no two steam trapping systemsare identical. Because of the wide array of steam trap applications with inherently different characteristics, choosing thecorrect steam trap for optimum performance is difficult. Waterhammer, superheat, corrosive condensate, or other damagingoperating characteristics dramatically affect performance of a steam trap. With over 85 years of experience in steamtechnology, Spirax Sarco is committed to helping its customers design, operate and maintain an efficient steam system.You have our word on it!
Application
Steam Mains to 30 psig ✓ ✓30-400 psig ✓ ✓to 600 psig ✓ ✓to 900 psig ✓ ✓
to 2000 psig ✓ ✓with Superheat ✓ ✓
Separators ✓ ✓
Steam Tracers Critical ✓ ✓Non-Critical ✓ ✓
Heating EquipmentShell & Tube Heat Exchangers ✓ ✓
Heating Coils ✓ ✓Unit Heaters ✓ ✓
Plate & Frame Heat Exchangers ✓ ✓Radiators ✓
General Process Equipment to 30 psig ✓ ✓to 200 psig ✓ ✓to 465 psig ✓ ✓to 600 psig ✓to 900 psig ✓
to 2000 psig ✓
Hospital Equipment Autoclaves ✓ ✓Sterilizers ✓ ✓
Fuel Oil Heating Bulk Storage Tanks ✓ ✓Line Heaters ✓
Tanks & Vats Bulk Storage Tanks ✓ ✓Process Vats ✓ ✓
Vulcanizers ✓ ✓
Evaporators ✓ ✓
Reboilers ✓ ✓
Rotating Cylinders ✓
Freeze Protection ✓
1st Choice 2nd Choice
NortheastSpirax Sarco, Inc.7760 Olentangy River Road Suite 120Columbus, OH 43235Phone: (614) 436-8055Fax: (614) 436-8479
Spirax Sarco, Inc.209 W. Central StreetSuite 228Natick, MA 01760Phone: (508) 651-3200Fax: (508) 655-9434
SoutheastSpirax Sarco, Inc.200 Centre Port DriveSuite 170Greensboro, NC 27409Phone: (336) 605-0221Fax: (336) 605-1719
MidwestSpirax Sarco, Inc.2806 Centre Circle DriveDowners Grove, IL 60515Phone: (630) 268-0330Fax: (630) 268-0336
SouthwestSpirax Sarco, Inc.203 Georgia AvenueDeer Park, TX 77536Phone: (281) 478-4002Fax: (281) 478-4615
WestSpirax Sarco, Inc.1930 East Carson StreetSuite 102Long Beach, CA 90810Phone: (310) 549-9962Fax: (310) 549-7909
Mid-AtlanticSpirax Sarco, Inc.4647 Saucon Creek RoadSuite 102Center Valley, PA 18034Phone: (610) 432-4557Fax: (610) 432-2595