Thermal Protection - DTA Aus...˜ Radial tile cutter ideal for straight and 45 angle cuts on single...
Transcript of Thermal Protection - DTA Aus...˜ Radial tile cutter ideal for straight and 45 angle cuts on single...
� Radial tile cutter ideal for straight and 45° angle cuts on single fired ceramic, porcelain stoneware and marble� Sliding cutting head with 45° tilt� Thermal Protection� Spray system� Includes � plunge handle � porcelain blade Code: CDC2004000 (200mm porcelain blade) � wheels � universal front handle (70088U)
� Bridge saw ideal for straight and 45° angle cuts of natural-stones, granite and marble slabs� Sliding cutting head with 45° tilt� Overheat protection with manual reset � Cutting progress system with hand wheel� Includes � plunge handle � laser guide � wheels � universal front handle (70088U) � porcelain blade Code: CDC3004000 (300mm porcelain blade)
SUPREME-100S 1000 707 x 707 85 2200 3 300 97.2
SUPREME-85S 850 601 x 601 85 2200 3 300 94.3
2200 3 300 112.6851061 x 10611500SUPREME-150S
2200 3 300 10485849 x 8491200SUPREME-120S
2200 3 300 130
15AMP
15AMP
15AMP
15AMP
15AMP851410 x 14102000SUPREME-200S
Code Motor Size (watts)
HP Power Plug
Blade Size (mm)
Weight (kg)
(mm) (mm) (mm)
CLASSPLUS-1050S
910> 42mm
1050<=42mm
645 x 645> 42mm
735 x 735<= 42mm
65 1400
1400
1.8
1.8
250
250
52
58.5
10AMP
10AMP65
820 x 820> 42mm
920 x 920<=42mm
1160>42mm
1300<=42mm
CLASSPLUS-1300S
Code Motor Size (watts)(mm) (mm) (mm)
HP Blade Size (mm)
Weight (kg)
Power Plug
636 x 636 40 1.3
1.340775 x 775
200
200
Blade Size (mm)
40.5
50
1000
1000
HP
(mm) (mm)
Motor Size (watts)
10AMP
10AMP
Power Plug
Weight (kg)
CLASS-900 900
1100CLASS-1100
Code
(mm)
� Radial tile cutter ideal for straight and 45° angle cuts on single fired ceramic, porcelain stoneware and marble� Sliding cutting head with 45° tilt� Thermal Protection� Spray system� Includes � plunge handle � laser guide � porcelain blade Code: CDC2504000 (250mm porcelain blade) � wheels � universal front handle (70088U)
� Radial tile cutter ideal for straight and 45° angle cuts on single and double fired ceramic, porcelain stoneware and marble � Sliding cutting head with 45° tilt� Collapsible legs� Spray System� Plunge handle� Includes porcelain blade Code: CDC2004000 (200mm porcelain blade)
1000
1000
1.3
1.3
200
200
40.3 10AMP
42.8
40
40
Motor Size (watts)
HP Blade Size (mm)
Weight (kg)
Power Plug
(mm)
10AMP
VIP900 636 x 636
777 x 777VIP1100
Code
900
1100
(mm) (mm)
� Masonry saw ideal for the building sector� Suitable for straight and 45° angle cuts of bricks, stones, concrete-blocks, granite, marble and natural stones� Adjustable cutting head� Sliding working table� Transport wheels� 45° angle cut support� Spray system� Blade not included
EGO80 2200 3 350 69.6 15AMP800 410 x 410 110
Code Motor Size (watts)
HP Blade Size (mm)
Weight (kg)
Power Plug
(mm) (mm) (mm)
420x297mm
By