The tear of grief

Line upwith = alignerAvec

The tear of grief is a buliding in New York.

It is lined up with the Statue of Liberty and the World trade

center.

It was designed by an Russian artist whose name is Zurab Tsereteli

33m175 tonsDedicate : Sept 11, 2006

It is 33m high ( how high is it ?)It weighs 175 tons ( how much

does it weigh?)It was dedicated on Sept 11, 2006, 5 years after the terrorists’attack.

On the wall behind the monument a portrait of Vladimir Putine was

painted.The Tear of Grief is a gift from

Vladimir Putine to the USA(The Tear of Grief was given to the

USA by Vladimir Putine)

Etch = engrave = graver Base -granite

The names of the 3,000 victims were etched in the 11-sided base

which is made of granite.

4 parts+ the tear- Ship from St Petersburg to New Jersey

Bayonne harbour

New Jersey

The Monument was cast in St. Petersburg, Russia, where it was assembled into four large pieces plus the tear. These five large pieces were shipped to Bayonne, New Jersey, where they arrived in August 2005.

4 tons, 12m, stainless steel – nickel plated

The tear is 12m long (how long is the Tear?)

It weighs 4 tons ( how much does it weigh?)

It is made of stainless steel which is plated with nickel.

the memorial –steel cover with / sheathe in bronze.

The memorial is made of steel which is covered with bronze/

steathed in bronze.

The foundations - 2004

The foundations were dug in 2004

Walkway - stones

The walkway which leads to the Tear of grief is made of stones.

Some messages/inscriptions were etched in the stones in memory of

the victims.

Dedication- September 11, 2006

Zurab Tsereteli

The Tear of Grief was dedicated by Bill Clinton on Sept 11, 2006. Zurab Tseretli was invited /

attended the ceremony.

Puntine ‘s and George W. Bush’s portraits were painted on the wall as they both fought terrorism.