The state of 3d printing and scanning after ces 2014 the push for mainstreaming begins make
21
The State of 3D Printing and Scanning After CES 2014: The Push For M... http://makezine.com/2014/01/16/the-state-of-3d-printing-and-scanning-af... 1 of 21 2014-05-03 9:58 PM
description
Â
Transcript of The state of 3d printing and scanning after ces 2014 the push for mainstreaming begins make
The State of 3D Printing and Scanning After CES 2014: The Push For M... http://makezine.com/2014/01/16/the-state-of-3d-printing-and-scanning-af...
1 of 21 2014-05-03 9:58 PM
The State of 3D Printing and Scanning After CES 2014: The Push For M... http://makezine.com/2014/01/16/the-state-of-3d-printing-and-scanning-af...
2 of 21 2014-05-03 9:58 PM
The State of 3D Printing and Scanning After CES 2014: The Push For M... http://makezine.com/2014/01/16/the-state-of-3d-printing-and-scanning-af...
3 of 21 2014-05-03 9:58 PM
The State of 3D Printing and Scanning After CES 2014: The Push For M... http://makezine.com/2014/01/16/the-state-of-3d-printing-and-scanning-af...
4 of 21 2014-05-03 9:58 PM
The State of 3D Printing and Scanning After CES 2014: The Push For M... http://makezine.com/2014/01/16/the-state-of-3d-printing-and-scanning-af...
5 of 21 2014-05-03 9:58 PM
The State of 3D Printing and Scanning After CES 2014: The Push For M... http://makezine.com/2014/01/16/the-state-of-3d-printing-and-scanning-af...
6 of 21 2014-05-03 9:58 PM
The State of 3D Printing and Scanning After CES 2014: The Push For M... http://makezine.com/2014/01/16/the-state-of-3d-printing-and-scanning-af...
7 of 21 2014-05-03 9:58 PM
″ ″ ″
The State of 3D Printing and Scanning After CES 2014: The Push For M... http://makezine.com/2014/01/16/the-state-of-3d-printing-and-scanning-af...
8 of 21 2014-05-03 9:58 PM
″
The State of 3D Printing and Scanning After CES 2014: The Push For M... http://makezine.com/2014/01/16/the-state-of-3d-printing-and-scanning-af...
9 of 21 2014-05-03 9:58 PM
″ ″
″ ″ ″
The State of 3D Printing and Scanning After CES 2014: The Push For M... http://makezine.com/2014/01/16/the-state-of-3d-printing-and-scanning-af...
10 of 21 2014-05-03 9:58 PM
The State of 3D Printing and Scanning After CES 2014: The Push For M... http://makezine.com/2014/01/16/the-state-of-3d-printing-and-scanning-af...
11 of 21 2014-05-03 9:58 PM
The State of 3D Printing and Scanning After CES 2014: The Push For M... http://makezine.com/2014/01/16/the-state-of-3d-printing-and-scanning-af...
12 of 21 2014-05-03 9:58 PM
The State of 3D Printing and Scanning After CES 2014: The Push For M... http://makezine.com/2014/01/16/the-state-of-3d-printing-and-scanning-af...
13 of 21 2014-05-03 9:58 PM
″ ″ ″
The State of 3D Printing and Scanning After CES 2014: The Push For M... http://makezine.com/2014/01/16/the-state-of-3d-printing-and-scanning-af...
14 of 21 2014-05-03 9:58 PM
The State of 3D Printing and Scanning After CES 2014: The Push For M... http://makezine.com/2014/01/16/the-state-of-3d-printing-and-scanning-af...
15 of 21 2014-05-03 9:58 PM
″ ″ ″
The State of 3D Printing and Scanning After CES 2014: The Push For M... http://makezine.com/2014/01/16/the-state-of-3d-printing-and-scanning-af...
16 of 21 2014-05-03 9:58 PM
″ ″ ″
″ ″ ″
The State of 3D Printing and Scanning After CES 2014: The Push For M... http://makezine.com/2014/01/16/the-state-of-3d-printing-and-scanning-af...
17 of 21 2014-05-03 9:58 PM
The State of 3D Printing and Scanning After CES 2014: The Push For M... http://makezine.com/2014/01/16/the-state-of-3d-printing-and-scanning-af...
18 of 21 2014-05-03 9:58 PM
The State of 3D Printing and Scanning After CES 2014: The Push For M... http://makezine.com/2014/01/16/the-state-of-3d-printing-and-scanning-af...
19 of 21 2014-05-03 9:58 PM
Powered by
The State of 3D Printing and Scanning After CES 2014: The Push For M... http://makezine.com/2014/01/16/the-state-of-3d-printing-and-scanning-af...
20 of 21 2014-05-03 9:58 PM
PiPhone: A DIY Raspberry Pi Cellphone•
Avatar — what wires did he use could
you put up a tutorial on how to do it? please
Super-Simple Mod Gives Your DSLR NineHours of Battery Life
•
Avatar — If you do this mod; mount the
battery parallel with the camera body and not
inline with the …
Test Your Skills at the Game of DronesAerial Sports Competition
•
Avatar — Sports Wallpaper Nice to determine
your site and awesome stuff...For Best
Wallpaper worldwide …
How to Make a 12 Foot Inflatable Death Star•
Avatar — So now you need to make a
planet model that you can blow up with it!
0 Comments
The State of 3D Printing and Scanning After CES 2014: The Push For M... http://makezine.com/2014/01/16/the-state-of-3d-printing-and-scanning-af...
21 of 21 2014-05-03 9:58 PM
