The spirit of ‘Made in Japan’€¦ · 40 REXIS XELA SHAFTS 41 REXIS KAIZA SHAFTS GOLF GEAR 43...

44

Transcript of The spirit of ‘Made in Japan’€¦ · 40 REXIS XELA SHAFTS 41 REXIS KAIZA SHAFTS GOLF GEAR 43...

Page 1: The spirit of ‘Made in Japan’€¦ · 40 REXIS XELA SHAFTS 41 REXIS KAIZA SHAFTS GOLF GEAR 43 BAGS / ACCESSORIES. The spirit of ‘Made in Japan’ craftsmanship and technology

yonex.co.uk

yonex.co.uk yonex.co.uk @YONEXGOLF_UK In keeping with our policy of constant product refinement, we reserve the right to make product changes at any time without prior notice.

©Yonex Co.Ltd. February 2018 UK

Page 2: The spirit of ‘Made in Japan’€¦ · 40 REXIS XELA SHAFTS 41 REXIS KAIZA SHAFTS GOLF GEAR 43 BAGS / ACCESSORIES. The spirit of ‘Made in Japan’ craftsmanship and technology

The spirit of ‘Made in Japan’ craftsmanship and technology

The latest in Graphite Crown technology or for the lightest possible shaft, Graphite, as a cutting-edge material in golf club manufacture brings unlimited possibilities to all golfers.

‘Every Yard Matters!’ Increasing your driving distance is the everlasting discussion point for any golfer. To meet these desires Yonex devote a significant amount of time on research and development to satisfy this expectation. The core team behind this is located at our production headquarters in Nagaoka City, Niigata prefecture. Here, each product goes through planning, production and quality control with developments achieved by utilising the latest technologies nurtured by our R&D team.

Graphite is a very strong and complex material that can have varying characteristics by simply adjusting the way in which the fibres are layered. Our understanding of this material at our production headquarters in Niigata enables us to design and manufacture clubs that harness the best qualities of Graphite. This has been enhanced by our heritage and highly skilled craftsmanship in manufacturing Graphite inspired sports equipment in both tennis and badminton. In golf club production the Graphite Crown achieves the optimal centre of gravity while combining it with a high-performance shaft that complements the head which is the key to increasing driving distances.

Taking traditional forged irons to the next level with Graphite.

Yonex are striving to also improve the performance of even the very best golfers by utilising our unique technologies. At Yonex we are not only focusing our attention on woods but also devoting our skill and energy on forged irons loved by many of the best golfers. The accuracy of an iron directly affects the scoring of these high-level golfers who demand pinpoint accuracy. At our Niigata production headquarters, the team of developers is passionate to contribute in improving the performance of these world class players. By combining traditional forgings with the latest Graphite technologies, we have succeeded in manufacturing forged irons with a new performance enhancing structure.

YONEX TECHNOLOGY02 YONEX TECHNOLOGY 03

EZONE GT

04 TECHNOLOGY

09 TYPE X DRIVER

10 FAIRWAY WOOD / HYBRID

12 IRON

13 PUTTER

FORGED IRONS

15 EZONE CB 501 FORGED IRON

16 EZONE CB 301 FORGED IRON

17 N1-MB FORGED IRON

17 EZONE N1-W FORGED WEDGE

Royal EZONE

19 DRIVER

20 HYBRID FAIRWAY

21 IRON

EZONE ELITE

23 DRIVER

24 FAIRWAY WOOD

25 HYBRID

26 IRON

27 PUTTER

EZONE TP

28 TP-GR1 / TP-BR1

29 TRIPRINCIPLE HYBRID

Royal EZONE Women

31 DRIVER

32 HYBRID FAIRWAY

33 IRON

EZONE ELITE Women

35 DRIVER

36 FAIRWAY WOOD

37 HYBRID

38 IRON

39 PUTTER

CUSTOM FIT

40 REXIS XELA SHAFTS

41 REXIS KAIZA SHAFTS

GOLF GEAR

43 BAGS / ACCESSORIES

Page 3: The spirit of ‘Made in Japan’€¦ · 40 REXIS XELA SHAFTS 41 REXIS KAIZA SHAFTS GOLF GEAR 43 BAGS / ACCESSORIES. The spirit of ‘Made in Japan’ craftsmanship and technology

The spirit of ‘Made in Japan’ craftsmanship and technology

The latest in Graphite Crown technology or for the lightest possible shaft, Graphite, as a cutting-edge material in golf club manufacture brings unlimited possibilities to all golfers.

‘Every Yard Matters!’ Increasing your driving distance is the everlasting discussion point for any golfer. To meet these desires Yonex devote a significant amount of time on research and development to satisfy this expectation. The core team behind this is located at our production headquarters in Nagaoka City, Niigata prefecture. Here, each product goes through planning, production and quality control with developments achieved by utilising the latest technologies nurtured by our R&D team.

Graphite is a very strong and complex material that can have varying characteristics by simply adjusting the way in which the fibres are layered. Our understanding of this material at our production headquarters in Niigata enables us to design and manufacture clubs that harness the best qualities of Graphite. This has been enhanced by our heritage and highly skilled craftsmanship in manufacturing Graphite inspired sports equipment in both tennis and badminton. In golf club production the Graphite Crown achieves the optimal centre of gravity while combining it with a high-performance shaft that complements the head which is the key to increasing driving distances.

Taking traditional forged irons to the next level with Graphite.

Yonex are striving to also improve the performance of even the very best golfers by utilising our unique technologies. At Yonex we are not only focusing our attention on woods but also devoting our skill and energy on forged irons loved by many of the best golfers. The accuracy of an iron directly affects the scoring of these high-level golfers who demand pinpoint accuracy. At our Niigata production headquarters, the team of developers is passionate to contribute in improving the performance of these world class players. By combining traditional forgings with the latest Graphite technologies, we have succeeded in manufacturing forged irons with a new performance enhancing structure.

YONEX TECHNOLOGY02 YONEX TECHNOLOGY 03

EZONE GT

04 TECHNOLOGY

09 TYPE X DRIVER

10 FAIRWAY WOOD / HYBRID

12 IRON

13 PUTTER

FORGED IRONS

15 EZONE CB 501 FORGED IRON

16 EZONE CB 301 FORGED IRON

17 N1-MB FORGED IRON

17 EZONE N1-W FORGED WEDGE

Royal EZONE

19 DRIVER

20 HYBRID FAIRWAY

21 IRON

EZONE ELITE

23 DRIVER

24 FAIRWAY WOOD

25 HYBRID

26 IRON

27 PUTTER

EZONE TP

28 TP-GR1 / TP-BR1

29 TRIPRINCIPLE HYBRID

Royal EZONE Women

31 DRIVER

32 HYBRID FAIRWAY

33 IRON

EZONE ELITE Women

35 DRIVER

36 FAIRWAY WOOD

37 HYBRID

38 IRON

39 PUTTER

CUSTOM FIT

40 REXIS XELA SHAFTS

41 REXIS KAIZA SHAFTS

GOLF GEAR

43 BAGS / ACCESSORIES

Page 4: The spirit of ‘Made in Japan’€¦ · 40 REXIS XELA SHAFTS 41 REXIS KAIZA SHAFTS GOLF GEAR 43 BAGS / ACCESSORIES. The spirit of ‘Made in Japan’ craftsmanship and technology

The new Yonex EX 320 Graphite shaft has been specifically designed and manufactured to produce the optimum performance for the EZONE GT range. The EX 320 shaft provides rapid snapback for maximum ball speeds whilst maintaining stability at the tip for that all important accuracy.

The EZONE GT Type X Driver features a new Lightweight Graphite Crown material that reduces weight. The resulting 14% weight reduction produces a lower and deeper centre of gravity allowing for a higher, low spin trajectory to maximise distance and forgiveness.

*Compared with conventional driver

A tour inspired shaft that provides rapid snapback for maximum power launching the ball

at a higher initial velocity whilst maintaining stability at the tip.

EX 320 for EZONE GT: Graphite Shaft

New Material: New Graphite Crown

14% Lighter Graphite Crown

The 14% Lighter Graphite Crown produces a lower and deeper

centre of gravity for increased distance*.

Innovative Graphite Crown A new High Performance Yonex Graphite Shaft

EZONE GT / TECHNOLOGY04 EZONE GT / TECHNOLOGY 05

Page 5: The spirit of ‘Made in Japan’€¦ · 40 REXIS XELA SHAFTS 41 REXIS KAIZA SHAFTS GOLF GEAR 43 BAGS / ACCESSORIES. The spirit of ‘Made in Japan’ craftsmanship and technology

The new Yonex EX 320 Graphite shaft has been specifically designed and manufactured to produce the optimum performance for the EZONE GT range. The EX 320 shaft provides rapid snapback for maximum ball speeds whilst maintaining stability at the tip for that all important accuracy.

The EZONE GT Type X Driver features a new Lightweight Graphite Crown material that reduces weight. The resulting 14% weight reduction produces a lower and deeper centre of gravity allowing for a higher, low spin trajectory to maximise distance and forgiveness.

*Compared with conventional driver

A tour inspired shaft that provides rapid snapback for maximum power launching the ball

at a higher initial velocity whilst maintaining stability at the tip.

EX 320 for EZONE GT: Graphite Shaft

New Material: New Graphite Crown

14% Lighter Graphite Crown

The 14% Lighter Graphite Crown produces a lower and deeper

centre of gravity for increased distance*.

Innovative Graphite Crown A new High Performance Yonex Graphite Shaft

EZONE GT / TECHNOLOGY04 EZONE GT / TECHNOLOGY 05

Page 6: The spirit of ‘Made in Japan’€¦ · 40 REXIS XELA SHAFTS 41 REXIS KAIZA SHAFTS GOLF GEAR 43 BAGS / ACCESSORIES. The spirit of ‘Made in Japan’ craftsmanship and technology

Vertical polishing on the face is a design that breaks the common way of thinking.Traditionally, face polishing is performed in a horizontal direction, but the 'EZONE GT' adopts a new vertical polish. A design that eliminates the need for grooves on the face, whilst improving shot accuracy off the tee. The Fairway Woods and Hybrids also feature a new face design which focuses on flight performance as well as accuracy. Yonex have realised distance performance and improved accuracy, with a design that is not limited by the conventional way of thinking.

With horizontal polishing it is easier to move the ball in a left/right direction compared to vertical polishing. As a result, the spin axis tilts, and there is an increase in side spin.

���������

With a vertical polish it is easier to move the ball in an upwards direction rather than horizontally. As a result, the spin axis is difficult to change and destructive side spin is minimised.

Vertical Polish

Spin axis small

Horizontal Polish

Ball movement comparison at the point of impact

Spin axis large

Robot test data (3˚open face angle)

Tested by Yonex

Head speed

�(mph)�

Vertical polish

Horizontal polish

86.7

86.5

125.9

125.4

16.0

16.7

9.1

11.0

23.8

28.8

Ballvelocity(mph)

Launchangle

(°)

Spinaxis(°)

3566

3869

Spin rate

(rpm)

195.3

191.7

Carrydistance

(yds)

LRdispersion

(yds)

210.8

205.6

Totaldistance

(yds)

Horizontal Polish

VerticalPolish

Vertical polishing improves accuracy by decreasing side spin. Testing shows a difference of up to 5 yards.

Ball landing position

G-BRID Construction:Inserting the Graphite dampening material into the cavity creates a softer hitting feel at impact by suppressing vibrations whilst also producing an optimal lower and deeper centre of gravity.

Flight distance is improved by up to 5% when compared to conventional irons as a result of increased ball speeds and a high but penetrating ball flight.The EZONE GT adopts the tour proven G-BRID head technology. The head is manufactured from Chrome Molybdenum steel (Chromoly steel) which has high repulsion properties. These properties are further enhanced by heat treating the face to increase power and expand the sweet spot whilst the hosel remains soft, allowing for easier custom fit adjustments.

Robot test data (#7 iron)

By adjusting the hardness of the Chrome Molybdenum steel, the face is hardened to enhance repulsion power whilst the hosel is softened to allow for easy loft and lie angle adjustment.

Headspeed(mph)

EZONE GT

Competitor

73.3

71.1

99.9

97.3

16.8

17.6

148

141

Ballvelocity(mph)

Launchangle

(°)

5115

5580

Spin rate

(rpm)

19.1

18.9

Trajectoryheight(yds)

Totaldistance

(yds)

135

129

Carrydistance

(yds)

Tested by Yonex

Vertical RealityA new idea was born from research into improving accuracy by affecting the spin

produced by the face.

G-BRIDGraphite Hybrid

G-BRID technology produces a distance enhancing lower centre

of gravity combined with the super soft feel of a forged iron.

EZONE GT / TECHNOLOGY06 EZONE GT / TECHNOLOGY 07

Page 7: The spirit of ‘Made in Japan’€¦ · 40 REXIS XELA SHAFTS 41 REXIS KAIZA SHAFTS GOLF GEAR 43 BAGS / ACCESSORIES. The spirit of ‘Made in Japan’ craftsmanship and technology

Vertical polishing on the face is a design that breaks the common way of thinking.Traditionally, face polishing is performed in a horizontal direction, but the 'EZONE GT' adopts a new vertical polish. A design that eliminates the need for grooves on the face, whilst improving shot accuracy off the tee. The Fairway Woods and Hybrids also feature a new face design which focuses on flight performance as well as accuracy. Yonex have realised distance performance and improved accuracy, with a design that is not limited by the conventional way of thinking.

With horizontal polishing it is easier to move the ball in a left/right direction compared to vertical polishing. As a result, the spin axis tilts, and there is an increase in side spin.

���������

With a vertical polish it is easier to move the ball in an upwards direction rather than horizontally. As a result, the spin axis is difficult to change and destructive side spin is minimised.

Vertical Polish

Spin axis small

Horizontal Polish

Ball movement comparison at the point of impact

Spin axis large

Robot test data (3˚open face angle)

Tested by Yonex

Head speed

�(mph)�

Vertical polish

Horizontal polish

86.7

86.5

125.9

125.4

16.0

16.7

9.1

11.0

23.8

28.8

Ballvelocity(mph)

Launchangle

(°)

Spinaxis(°)

3566

3869

Spin rate

(rpm)

195.3

191.7

Carrydistance

(yds)

LRdispersion

(yds)

210.8

205.6

Totaldistance

(yds)

Horizontal Polish

VerticalPolish

Vertical polishing improves accuracy by decreasing side spin. Testing shows a difference of up to 5 yards.

Ball landing position

G-BRID Construction:Inserting the Graphite dampening material into the cavity creates a softer hitting feel at impact by suppressing vibrations whilst also producing an optimal lower and deeper centre of gravity.

Flight distance is improved by up to 5% when compared to conventional irons as a result of increased ball speeds and a high but penetrating ball flight.The EZONE GT adopts the tour proven G-BRID head technology. The head is manufactured from Chrome Molybdenum steel (Chromoly steel) which has high repulsion properties. These properties are further enhanced by heat treating the face to increase power and expand the sweet spot whilst the hosel remains soft, allowing for easier custom fit adjustments.

Robot test data (#7 iron)

By adjusting the hardness of the Chrome Molybdenum steel, the face is hardened to enhance repulsion power whilst the hosel is softened to allow for easy loft and lie angle adjustment.

Headspeed(mph)

EZONE GT

Competitor

73.3

71.1

99.9

97.3

16.8

17.6

148

141

Ballvelocity(mph)

Launchangle

(°)

5115

5580

Spin rate

(rpm)

19.1

18.9

Trajectoryheight(yds)

Totaldistance

(yds)

135

129

Carrydistance

(yds)

Tested by Yonex

Vertical RealityA new idea was born from research into improving accuracy by affecting the spin

produced by the face.

G-BRIDGraphite Hybrid

G-BRID technology produces a distance enhancing lower centre

of gravity combined with the super soft feel of a forged iron.

EZONE GT / TECHNOLOGY06 EZONE GT / TECHNOLOGY 07

Page 8: The spirit of ‘Made in Japan’€¦ · 40 REXIS XELA SHAFTS 41 REXIS KAIZA SHAFTS GOLF GEAR 43 BAGS / ACCESSORIES. The spirit of ‘Made in Japan’ craftsmanship and technology

EX 320 for EZONE GT Type X: Graphite Shaft Original grip (round with Yonex logo)50g size 60 /

Head cover Torque wrench Driver Fairway Wood Hybrid Iron

The Driver features vertical polishing, whilst the Fairway

Woods and Hybrids have slanted grooves. The Iron adopts

traditional horizontal grooves.

Groove Flow Concept Shaft EX 320

Shaft Flex R S SL R S SL R FL FL

Loft Angle (°) 9 10.5 12 14

Lie Angle (°) 59.0 (STD)

Face Angle (°) 0.5 Open (STD)

Volume (ml) 450

Head Weight (g) 202.0 (Including 8g sleeve)

Shaft Weight (g) 51 53 49 51 53 49 51 44 44

Torque (°) 5 5.5

Club Length (inch) 46 44.5

Swing Weight D5 C9

Club Weight (g) 306 308 304 306 308 304 306 287 287

Left Hand available in 10.5˚ regular

DRIVER

FAIRWAY WOOD

No. #3 #5 #7

Shaft EX 320

Shaft Flex SL R S FL SL R S FL SL R FL

Loft Angle (°) 15 18 18 21 21 24

Lie Angle (°) 58.0 (STD) 58.5 (STD) 59.0 (STD)

Face Angle (°) 1.0 Open (STD)

Women's

Men's

EZONE GT TYPE X DRIVERInnovative Graphite Crown and Vertically Polished Face to achieve maximum distances with unprecedented accuracy.

Centre of gravity depth: 38.2mm / Centre of gravity distance: 38.4mm / Centre of gravity height: 25.2mm / Face height: 54mm

QUICK ADJUSTSYSTEM

08 EZONE GT / DRIVER 09EZONE GT / LINEUP

Page 9: The spirit of ‘Made in Japan’€¦ · 40 REXIS XELA SHAFTS 41 REXIS KAIZA SHAFTS GOLF GEAR 43 BAGS / ACCESSORIES. The spirit of ‘Made in Japan’ craftsmanship and technology

EX 320 for EZONE GT Type X: Graphite Shaft Original grip (round with Yonex logo)50g size 60 /

Head cover Torque wrench Driver Fairway Wood Hybrid Iron

The Driver features vertical polishing, whilst the Fairway

Woods and Hybrids have slanted grooves. The Iron adopts

traditional horizontal grooves.

Groove Flow Concept Shaft EX 320

Shaft Flex R S SL R S SL R FL FL

Loft Angle (°) 9 10.5 12 14

Lie Angle (°) 59.0 (STD)

Face Angle (°) 0.5 Open (STD)

Volume (ml) 450

Head Weight (g) 202.0 (Including 8g sleeve)

Shaft Weight (g) 51 53 49 51 53 49 51 44 44

Torque (°) 5 5.5

Club Length (inch) 46 44.5

Swing Weight D5 C9

Club Weight (g) 306 308 304 306 308 304 306 287 287

Left Hand available in 10.5˚ regular

DRIVER

FAIRWAY WOOD

No. #3 #5 #7

Shaft EX 320

Shaft Flex SL R S FL SL R S FL SL R FL

Loft Angle (°) 15 18 18 21 21 24

Lie Angle (°) 58.0 (STD) 58.5 (STD) 59.0 (STD)

Face Angle (°) 1.0 Open (STD)

Women's

Men's

EZONE GT TYPE X DRIVERInnovative Graphite Crown and Vertically Polished Face to achieve maximum distances with unprecedented accuracy.

Centre of gravity depth: 38.2mm / Centre of gravity distance: 38.4mm / Centre of gravity height: 25.2mm / Face height: 54mm

QUICK ADJUSTSYSTEM

08 EZONE GT / DRIVER 09EZONE GT / LINEUP

Page 10: The spirit of ‘Made in Japan’€¦ · 40 REXIS XELA SHAFTS 41 REXIS KAIZA SHAFTS GOLF GEAR 43 BAGS / ACCESSORIES. The spirit of ‘Made in Japan’ craftsmanship and technology

Shaft Name EX 320

Shaft Flex R S SL R S SL R FL FL

Loft Angle(°) 9 10.5 12 14

Lie Angle (°) 59.0 (STD)

Face Angle (°) 0.5 Open (STD)

Volume (ml) 450

Head Weight (g) 202.0 (Including 8g sleeve)

Shaft Weight (g) 51 53 49 51 53 49 51 44 44

Torque (°) 5 5.5

Club Length (inch) 46 44.5

Swing Weight D5 C9

Club Weight (g) 306 308 304 306 308 304 306 287 287

(10.5 Also available in LH regular)

DRIVER

FAIRWAY WOOD

No. #3 #5 #7

Shaft EX 320

Shaft Flex SL R S FL SL R S FL SL R FL

Loft Angle (°) 15 18 18 21 21 24

Lie Angle (°) 58.0 (STD) 58.5 (STD) 59.0 (STD)

Face Angle (°) 1.0 Open (STD)

Volume (ml) 178 180 152 154 141 143

Head Weight (g) 217 215.5 223 222 229 229.5

Shaft Weight (g) 50 51 55 46 49 50 54 45 48 49 44

Torque (°) 4.5 5 4.5 5 4.5 5

Club Length (inch) 43.25 42.25 42.5 41.5 41.75 40.75

Swing Weight D1 C8 D1 C8 D1 C8

Club Weight (g) 320 321 325 303 325 326 330 309 330 331 314

Left Hand available in #3 and #5 regular

UTILITY No. #3 #4 #5 #6 #7

Shaft EX 320

Shaft Flex SL R S SL R S FL SL R FL FL FL

Loft Angle (°) 19 22 25.5 29 33

Lie Angle (°) 58.5 (STD) 59.0 (STD) 59.5 (STD) 60 60.5

Face Angle (°) 1.0 Open (STD)

Volume (ml) 107 105 105 104 104 102 100

Head Weight (g) 237 244.5 244.5 253.5 262.5 271.5

Shaft Weight (g) 53 54 57 52 53 56 49 51 52 48 47 46

Torque (°) 4 4.5 4 4.5 4.5 4.5

Club Length (inch) 40.75 40 39 39.25 38.25 37.5 36.75

Swing Weight D1 D1 C8 D1 C8 C8 C8

Club Weight (g) 341 344 345 347 351 351 333 357 359 342 351 360

(#3, #4 Also available in LH regular)

MENS IRONS No 4 5 6 7 8 9 PW AW SW

Shaft Options Graphite: EX 320 Steel: N.S.PRO950GH HT

Loft (°) 20 22 25 28 32 37 42 48 54

Lie (°) 61 61.5 62 62.5 63 63.5 64 64 64

Offset (mm) 2.5 2.5 2.5 2.5 3 3.5 3.5 4.5 5

Face progression (°) 0 0 1 2 3 4 5 11 14

Head Weight (g) 246.5 255 264 270 277 284 293 301 306.5

Shaft Length (inch) Graphite 39.5 38.75 38 37.5 37 36.5 36 35.75 35.5

Shaft Length (inch) Steel 39 38.25 37.75 37.25 36.75 36.25 35.75 35.5 35.25

Swing weight Graphite D2 (Steel D4) D3 D4

(Also available in LH Steel: R,S Graphite: SL,R,S)

LADIES IRONS

No 5 6 7 8 9 PW AW SW

Shaft Options Graphite: EX 320

Loft (°) 22 25 28 32 37 42 48 54

Lie (°) 61.5 62 62.5 63 63.5 64 64 64

Offset (mm) 2.5 2.5 2.5 3 3.5 3.5 4.5 5

Face progression (°) 0 1 2 3 4 5 11 14

Head Weight (g) 255 264 270 277 284 293 301 306.5

Shaft Length (inch) 37.75 37 36.5 36 35.5 35 34.75 34.5

Swing weight Graphite C8 C9 D0

MENS IRONS Shaft Options EX 320 N.S.PRO950GH HT

Shaft Flex SL R S R S

Total Weight (g) 364 366 368 403 407

Shaft Weight (g) 53 55 57 94.5 98

Torque (°) 3.5 3.5 3.5 2 1.8

LADIES IRONS

Shaft Options EX 320

Shaft Flex FL

Total Weight (g) 363

Shaft Weight (g) 50

Torque (°) 4

MENS PUTTER LADIES PUTTER

Shaft Name EX 320

Shaft Flex R S SL R S SL R FL FL

Loft Angle(°) 9 10.5 12 14

Lie Angle (°) 59.0 (STD)

Face Angle (°) 0.5 Open (STD)

Volume (ml) 450

Head Weight (g) 202.0 (Including 8g sleeve)

Shaft Weight (g) 51 53 49 51 53 49 51 44 44

Torque (°) 5 5.5

Club Length (inch) 46 44.5

Swing Weight D5 C9

Club Weight (g) 306 308 304 306 308 304 306 287 287

(10.5 Also available in LH regular)

DRIVER

FAIRWAY WOOD

No. #3 #5 #7

Shaft EX 320

Shaft Flex SL R S FL SL R S FL SL R FL

Loft Angle (°) 15 18 18 21 21 24

Lie Angle (°) 58.0 (STD) 58.5 (STD) 59.0 (STD)

Face Angle (°) 1.0 Open (STD)

Volume (ml) 178 180 152 154 141 143

Head Weight (g) 217 215.5 223 222 229 229.5

Shaft Weight (g) 50 51 55 46 49 50 54 45 48 49 44

Torque (°) 4.5 5 4.5 5 4.5 5

Club Length (inch) 43.25 42.25 42.5 41.5 41.75 40.75

Swing Weight D1 C8 D1 C8 D1 C8

Club Weight (g) 320 321 325 303 325 326 330 309 330 331 314

(#3, #5 Also available in LH regular)

UTILITY No. #3 #4 #5 #6 #7

Shaft EX 320

Shaft Flex SL R S SL R S FL SL R FL FL FL

Loft Angle (°) 19 22 25.5 29 33

Lie Angle (°) 58.5 (STD) 59.0 (STD) 59.5 (STD) 60 60.5

Face Angle (°) 1.0 Open (STD)

Volume (ml) 107 105 105 104 104 102 100

Head Weight (g) 237 244.5 244.5 253.5 262.5 271.5

Shaft Weight (g) 53 54 57 52 53 56 49 51 52 48 47 46

Torque (°) 4 4.5 4 4.5 4.5 4.5

Club Length (inch) 40.75 40 39 39.25 38.25 37.5 36.75

Swing Weight D1 D1 C8 D1 C8 C8 C8

Club Weight (g) 341 344 345 347 351 351 333 357 359 342 351 360

Left Hand available in #3 and #4 regular

MENS IRONS No 4 5 6 7 8 9 PW AW SW

Shaft Options Graphite: EX 320 Steel: N.S.PRO950GH HT

Loft (°) 20 22 25 28 32 37 42 48 54

Lie (°) 61 61.5 62 62.5 63 63.5 64 64 64

Offset (mm) 2.5 2.5 2.5 2.5 3 3.5 3.5 4.5 5

Face progression (°) 0 0 1 2 3 4 5 11 14

Head Weight (g) 246.5 255 264 270 277 284 293 301 306.5

Shaft Length (inch) Graphite 39.5 38.75 38 37.5 37 36.5 36 35.75 35.5

Shaft Length (inch) Steel 39 38.25 37.75 37.25 36.75 36.25 35.75 35.5 35.25

Swing weight Graphite D2 (Steel D4) D3 D4

MENS IRONS Shaft Options EX 320 N.S.PRO950GH HT

Shaft Flex SL R S R S

Total Weight (g) 364 366 368 403 407

Shaft Weight (g) 53 55 57 94.5 98

Torque (°) 3.5 3.5 3.5 2 1.8

EX 320 for EZONE GT: Graphite Shaft

A new face design concept. Slanted Grooves producea stable and accurate ball flight with the precision of an iron.

EZONE GT Fairway WoodSlanted Grooves produce a stable and accurate ball flight.

Centre of gravity depth: 30.7mm / Centre of gravity distance: 28mm / Centre of gravity height: 17.1mm / Face height: 34mm

EZONE GT Hybrid

Centre of gravity depth: 28.4mm / Centre of gravity distance: 33.3mm / Centre of gravity height: 13.8mm / Face height: 33mm

QUICK ADJUSTSYSTEM

The Slanted Grooves prevent grass and moisture from coming in-between the club face and the ball, helping to stabilise the ball

flight reducing left and right side spin for more accuracy.

¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢

¢¢¢¢¢¢

Spin axis: large

Spin axis: large

¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢

Vertical groove face

Horizontal groove face

Slanted groove face

Spin axis: small

Dispersion Comparison

Tested by Yonex

Slanted5.5 yds

Vertical

10.4 yds

Horizontal

8.9 ydsLeft/right width

The spin axis is small, direction is more stable increasing accuracy.

A new face design concept

Slanted Grooves produce a stable and accurate ball flight.

The spin axis is large, direction is less stable reducing accuracy.

Vertical grooves make the ball slide on the face.

The spin axis is not constant and the ball direction is less stable reducing accuracy.

Movement comparison of the golf ball at the point of impact.

Head cover Torque wrench

QUICK ADJUSTSYSTEM

Original grip (round with Yonex logo)50g size 60 /

EZONE GT / FAIRWAY WOOD / HYBRID10 EZONE GT / FAIRWAY WOOD / HYBRID 11

Women's

Men's

Men's

Women's

Page 11: The spirit of ‘Made in Japan’€¦ · 40 REXIS XELA SHAFTS 41 REXIS KAIZA SHAFTS GOLF GEAR 43 BAGS / ACCESSORIES. The spirit of ‘Made in Japan’ craftsmanship and technology

Shaft Name EX 320

Shaft Flex R S SL R S SL R FL FL

Loft Angle(°) 9 10.5 12 14

Lie Angle (°) 59.0 (STD)

Face Angle (°) 0.5 Open (STD)

Volume (ml) 450

Head Weight (g) 202.0 (Including 8g sleeve)

Shaft Weight (g) 51 53 49 51 53 49 51 44 44

Torque (°) 5 5.5

Club Length (inch) 46 44.5

Swing Weight D5 C9

Club Weight (g) 306 308 304 306 308 304 306 287 287

(10.5 Also available in LH regular)

DRIVER

FAIRWAY WOOD

No. #3 #5 #7

Shaft EX 320

Shaft Flex SL R S FL SL R S FL SL R FL

Loft Angle (°) 15 18 18 21 21 24

Lie Angle (°) 58.0 (STD) 58.5 (STD) 59.0 (STD)

Face Angle (°) 1.0 Open (STD)

Volume (ml) 178 180 152 154 141 143

Head Weight (g) 217 215.5 223 222 229 229.5

Shaft Weight (g) 50 51 55 46 49 50 54 45 48 49 44

Torque (°) 4.5 5 4.5 5 4.5 5

Club Length (inch) 43.25 42.25 42.5 41.5 41.75 40.75

Swing Weight D1 C8 D1 C8 D1 C8

Club Weight (g) 320 321 325 303 325 326 330 309 330 331 314

Left Hand available in #3 and #5 regular

UTILITY No. #3 #4 #5 #6 #7

Shaft EX 320

Shaft Flex SL R S SL R S FL SL R FL FL FL

Loft Angle (°) 19 22 25.5 29 33

Lie Angle (°) 58.5 (STD) 59.0 (STD) 59.5 (STD) 60 60.5

Face Angle (°) 1.0 Open (STD)

Volume (ml) 107 105 105 104 104 102 100

Head Weight (g) 237 244.5 244.5 253.5 262.5 271.5

Shaft Weight (g) 53 54 57 52 53 56 49 51 52 48 47 46

Torque (°) 4 4.5 4 4.5 4.5 4.5

Club Length (inch) 40.75 40 39 39.25 38.25 37.5 36.75

Swing Weight D1 D1 C8 D1 C8 C8 C8

Club Weight (g) 341 344 345 347 351 351 333 357 359 342 351 360

(#3, #4 Also available in LH regular)

MENS IRONS No 4 5 6 7 8 9 PW AW SW

Shaft Options Graphite: EX 320 Steel: N.S.PRO950GH HT

Loft (°) 20 22 25 28 32 37 42 48 54

Lie (°) 61 61.5 62 62.5 63 63.5 64 64 64

Offset (mm) 2.5 2.5 2.5 2.5 3 3.5 3.5 4.5 5

Face progression (°) 0 0 1 2 3 4 5 11 14

Head Weight (g) 246.5 255 264 270 277 284 293 301 306.5

Shaft Length (inch) Graphite 39.5 38.75 38 37.5 37 36.5 36 35.75 35.5

Shaft Length (inch) Steel 39 38.25 37.75 37.25 36.75 36.25 35.75 35.5 35.25

Swing weight Graphite D2 (Steel D4) D3 D4

(Also available in LH Steel: R,S Graphite: SL,R,S)

LADIES IRONS

No 5 6 7 8 9 PW AW SW

Shaft Options Graphite: EX 320

Loft (°) 22 25 28 32 37 42 48 54

Lie (°) 61.5 62 62.5 63 63.5 64 64 64

Offset (mm) 2.5 2.5 2.5 3 3.5 3.5 4.5 5

Face progression (°) 0 1 2 3 4 5 11 14

Head Weight (g) 255 264 270 277 284 293 301 306.5

Shaft Length (inch) 37.75 37 36.5 36 35.5 35 34.75 34.5

Swing weight Graphite C8 C9 D0

MENS IRONS Shaft Options EX 320 N.S.PRO950GH HT

Shaft Flex SL R S R S

Total Weight (g) 364 366 368 403 407

Shaft Weight (g) 53 55 57 94.5 98

Torque (°) 3.5 3.5 3.5 2 1.8

LADIES IRONS

Shaft Options EX 320

Shaft Flex FL

Total Weight (g) 363

Shaft Weight (g) 50

Torque (°) 4

MENS PUTTER LADIES PUTTER

Shaft Name EX 320

Shaft Flex R S SL R S SL R FL FL

Loft Angle(°) 9 10.5 12 14

Lie Angle (°) 59.0 (STD)

Face Angle (°) 0.5 Open (STD)

Volume (ml) 450

Head Weight (g) 202.0 (Including 8g sleeve)

Shaft Weight (g) 51 53 49 51 53 49 51 44 44

Torque (°) 5 5.5

Club Length (inch) 46 44.5

Swing Weight D5 C9

Club Weight (g) 306 308 304 306 308 304 306 287 287

(10.5 Also available in LH regular)

DRIVER

FAIRWAY WOOD

No. #3 #5 #7

Shaft EX 320

Shaft Flex SL R S FL SL R S FL SL R FL

Loft Angle (°) 15 18 18 21 21 24

Lie Angle (°) 58.0 (STD) 58.5 (STD) 59.0 (STD)

Face Angle (°) 1.0 Open (STD)

Volume (ml) 178 180 152 154 141 143

Head Weight (g) 217 215.5 223 222 229 229.5

Shaft Weight (g) 50 51 55 46 49 50 54 45 48 49 44

Torque (°) 4.5 5 4.5 5 4.5 5

Club Length (inch) 43.25 42.25 42.5 41.5 41.75 40.75

Swing Weight D1 C8 D1 C8 D1 C8

Club Weight (g) 320 321 325 303 325 326 330 309 330 331 314

(#3, #5 Also available in LH regular)

UTILITY No. #3 #4 #5 #6 #7

Shaft EX 320

Shaft Flex SL R S SL R S FL SL R FL FL FL

Loft Angle (°) 19 22 25.5 29 33

Lie Angle (°) 58.5 (STD) 59.0 (STD) 59.5 (STD) 60 60.5

Face Angle (°) 1.0 Open (STD)

Volume (ml) 107 105 105 104 104 102 100

Head Weight (g) 237 244.5 244.5 253.5 262.5 271.5

Shaft Weight (g) 53 54 57 52 53 56 49 51 52 48 47 46

Torque (°) 4 4.5 4 4.5 4.5 4.5

Club Length (inch) 40.75 40 39 39.25 38.25 37.5 36.75

Swing Weight D1 D1 C8 D1 C8 C8 C8

Club Weight (g) 341 344 345 347 351 351 333 357 359 342 351 360

Left Hand available in #3 and #4 regular

MENS IRONS No 4 5 6 7 8 9 PW AW SW

Shaft Options Graphite: EX 320 Steel: N.S.PRO950GH HT

Loft (°) 20 22 25 28 32 37 42 48 54

Lie (°) 61 61.5 62 62.5 63 63.5 64 64 64

Offset (mm) 2.5 2.5 2.5 2.5 3 3.5 3.5 4.5 5

Face progression (°) 0 0 1 2 3 4 5 11 14

Head Weight (g) 246.5 255 264 270 277 284 293 301 306.5

Shaft Length (inch) Graphite 39.5 38.75 38 37.5 37 36.5 36 35.75 35.5

Shaft Length (inch) Steel 39 38.25 37.75 37.25 36.75 36.25 35.75 35.5 35.25

Swing weight Graphite D2 (Steel D4) D3 D4

MENS IRONS Shaft Options EX 320 N.S.PRO950GH HT

Shaft Flex SL R S R S

Total Weight (g) 364 366 368 403 407

Shaft Weight (g) 53 55 57 94.5 98

Torque (°) 3.5 3.5 3.5 2 1.8

EX 320 for EZONE GT: Graphite Shaft

A new face design concept. Slanted Grooves producea stable and accurate ball flight with the precision of an iron.

EZONE GT Fairway WoodSlanted Grooves produce a stable and accurate ball flight.

Centre of gravity depth: 30.7mm / Centre of gravity distance: 28mm / Centre of gravity height: 17.1mm / Face height: 34mm

EZONE GT Hybrid

Centre of gravity depth: 28.4mm / Centre of gravity distance: 33.3mm / Centre of gravity height: 13.8mm / Face height: 33mm

QUICK ADJUSTSYSTEM

The Slanted Grooves prevent grass and moisture from coming in-between the club face and the ball, helping to stabilise the ball

flight reducing left and right side spin for more accuracy.

¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢

¢¢¢¢¢¢

Spin axis: large

Spin axis: large

¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢

Vertical groove face

Horizontal groove face

Slanted groove face

Spin axis: small

Dispersion Comparison

Tested by Yonex

Slanted5.5 yds

Vertical

10.4 yds

Horizontal

8.9 ydsLeft/right width

The spin axis is small, direction is more stable increasing accuracy.

A new face design concept

Slanted Grooves produce a stable and accurate ball flight.

The spin axis is large, direction is less stable reducing accuracy.

Vertical grooves make the ball slide on the face.

The spin axis is not constant and the ball direction is less stable reducing accuracy.

Movement comparison of the golf ball at the point of impact.

Head cover Torque wrench

QUICK ADJUSTSYSTEM

Original grip (round with Yonex logo)50g size 60 /

EZONE GT / FAIRWAY WOOD / HYBRID10 EZONE GT / FAIRWAY WOOD / HYBRID 11

Women's

Men's

Men's

Women's

Page 12: The spirit of ‘Made in Japan’€¦ · 40 REXIS XELA SHAFTS 41 REXIS KAIZA SHAFTS GOLF GEAR 43 BAGS / ACCESSORIES. The spirit of ‘Made in Japan’ craftsmanship and technology

EZONE GT / IRON12 EZONE GT / PUTTER 13

N.S.PRO950GHEX 320 for EZONE GT: Graphite Shaft Original grip (round with Yonex logo)50g size 60 /

Shaft Name EX 320

Shaft Flex R S SL R S SL R FL FL

Loft Angle(°) 9 10.5 12 14

Lie Angle (°) 59.0 (STD)

Face Angle (°) 0.5 Open (STD)

Volume (ml) 450

Head Weight (g) 202.0 (Including 8g sleeve)

Shaft Weight (g) 51 53 49 51 53 49 51 44 44

Torque (°) 5 5.5

Club Length (inches) 46 44.5

Swing Weight (g) D5 C9

Club Weight (g) 306 308 304 306 308 304 306 287 287

FAIRWAY WOOD (#3, #5 Also available in LH regular)

No. #3 #5 #7

Shaft EX 320

Shaft Flex SL R S FL SL R S FL SL R FL

Loft Angle (°) 15 18 18 21 21 24

Lie Angle (°) 58.0 (STD) 58.5 (STD) 59.0 (STD)

Face Angle (°) 1.0 Open (STD)

Volume (ml) 178 180 152 154 141 143

Head Weight (g) 217 215.5 223 222 229 229.5

Shaft Weight (g) 50 51 55 46 49 50 54 45 48 49 44

Torque (°) 4.5 5 4.5 5 4.5 5

Club Length (inch) 43.25 42.25 42.5 41.5 41.75 40.75

Swing Weight D1 C8 D1 C8 D1 C8

Club Weight (g) 320 321 325 303 325 326 330 309 330 331 314

UTILITY (#3, #4 Also available in LH regular)

No. #3 #4 #5 #6 #7

Shaft EX 320

Shaft Flex SL R S SL R S FL SL R FL FL FL

Loft Angle (°) 19 22 25.5 29 33

Lie Angle (°) 58.5 (STD) 59.0 (STD) 59.5 (STD) 60 60.5

Face Angle (°) 1.0 Open (STD)

Volume (ml) 107 105 105 104 104 102 100

Head Weight (g) 237 244.5 244.5 253.5 253.5 253.5 262.5 271.5

Shaft Weight (g) 53 54 57 52 53 56 49 51 52 48 47 46

Torque (°) 4 4.5 4 4.5 4.5 4.5

Club Length (inch) 40.75 40 39 39.25 38.25 37.5 36.75

Swing Weight D1 D1 C8 D1 C8 C8 C8

Club Weight (g) 341 344 345 347 351 351 333 357 359 342 351 360

MENS IRONS Also available in LH Steel: R,S Graphite: SL,R,S

No. 4 5 6 7 8 9 PW AW SW

Shaft Option Graphite EX 320 Steel N.S.PRO950GH

Loft Angle (STD) 20 22 25 28 32 37 42 48 54

Lie Angle (°) 61 61.5 62 62.5 63 63.5 64 64 64

Offset (mm) 2.5 2.5 2.5 2.5 3 3.5 3.5 4.5 5

Face Progression (°) 0 0 1 2 3 4 5 11 14

Head Weight (g) 246.5 255 264 270 277 284 293 301 306.5

Shaft Length (inch) Graphite 39.5 38.75 38 37.5 37 36.5 36 35.75 35.5

Steel 39 38.25 37.75 37.25 36.75 36.25 35.75 35.5 35.25

Swing Weight Graphite D2 (Steel D4) D3 D4

LADIES IRONS

No 5 6 7 8 9 PW AW SW

Shaft Options Graphite EX 320

Loft Angle (°) 22 25 28 32 37 42 48 54

Lie Angle (°) 61.5 62 62.5 63 63.5 64 64 64

Offset (mm) 2.5 2.5 2.5 3 3.5 3.5 4.5 5

Face progression (°) 0 1 2 3 4 5 11 14

Head Weight (g) 255 264 270 277 284 293 301 306.5

Shaft Length (inch) 37.75 37 36.5 36 35.5 35 34.75 34.5

Swing weight Graphite C8 C9 D0

Shaft Option EX 320 N.S.PRO950GH

Shaft Flex SL R S R S

Total Weight (g) 364 366 368 403 407

Shaft Weight (g) 53 55 57 94.5 98

Torque (°) 3.5 3.5 3.5 2 1.8

LADIES IRONS

Shaft Options EX 320

Shaft Flex FL

Total Weight (g) 363

Shaft Weight (g) 50

Torque (°) 4

MENS PUTTER

Loft Lie Head Weight Length

3° 71° 355g 34

LADIES PUTTER

Loft Lie Head Weight Length

3° 71° 355g 33

Lie Angle (°) 59.0 (STD)

Face Angle (°) 0.5 Open (STD)

Volume (ml) 450

Head Weight (g) 202.0 (Including 8g sleeve)

Shaft Weight (g) 51 53 49 51 53 49 51 44 44

Torque (°) 5 5.5

Club Length (inches) 46 44.5

Swing Weight (g) D5 C9

Club Weight (g) 306 308 304 306 308 304 306 287 287

FAIRWAY WOOD (#3, #5 Also available in LH regular)

No. #3 #5 #7

Shaft EX 320

Shaft Flex SL R S FL SL R S FL SL R FL

Loft Angle (°) 15 18 18 21 21 24

Lie Angle (°) 58.0 (STD) 58.5 (STD) 59.0 (STD)

Face Angle (°) 1.0 Open (STD)

Volume (ml) 178 180 152 154 141 143

Head Weight (g) 217 215.5 223 222 229 229.5

Shaft Weight (g) 50 51 55 46 49 50 54 45 48 49 44

Torque (°) 4.5 5 4.5 5 4.5 5

Club Length (inch) 43.25 42.25 42.5 41.5 41.75 40.75

Swing Weight D1 C8 D1 C8 D1 C8

Club Weight (g) 320 321 325 303 325 326 330 309 330 331 314

UTILITY (#3, #4 Also available in LH regular)

No. #3 #4 #5 #6 #7

Shaft EX 320

Shaft Flex SL R S SL R S FL SL R FL FL FL

Loft Angle (°) 19 22 25.5 29 33

Lie Angle (°) 58.5 (STD) 59.0 (STD) 59.5 (STD) 60 60.5

Face Angle (°) 1.0 Open (STD)

Volume (ml) 107 105 105 104 104 102 100

Head Weight (g) 237 244.5 244.5 253.5 253.5 253.5 262.5 271.5

Shaft Weight (g) 53 54 57 52 53 56 49 51 52 48 47 46

Torque (°) 4 4.5 4 4.5 4.5 4.5

Club Length (inch) 40.75 40 39 39.25 38.25 37.5 36.75

Swing Weight D1 D1 C8 D1 C8 C8 C8

Club Weight (g) 341 344 345 347 351 351 333 357 359 342 351 360

MENS IRONS (Also available in LH Steel: R,S Graphite:SL,R,S)

No 4 5 6 7 8 9 PW AW SW

Shaft Options Graphite EX 320 Steel N.S.PRO950GH

Loft Angle (STD) 20 22 25 28 32 37 42 48 54

Lie Angle (°) 61 61.5 62 62.5 63 63.5 64 64 64

Offset (mm) 2.5 2.5 2.5 2.5 3 3.5 3.5 4.5 5

Face progression (°) 0 0 1 2 3 4 5 11 14

Head Weight (g) 246.5 255 264 270 277 284 293 301 306.5

Shaft Length (inch) Graphite 39.5 38.75 38 37.5 37 36.5 36 35.75 35.5

Steel 39 38.25 37.75 37.25 36.75 36.25 35.75 35.5 35.25

Swing weight Graphite D2 (Steel D4) D3 D4

LADIES IRONS

No. 5 6 7 8 9 PW AW SW

Shaft Graphite EX 320

Loft Angle (°) 22 25 28 32 37 42 48 54

Lie Angle (°) 61.5 62 62.5 63 63.5 64 64 64

Offset (mm) 2.5 2.5 2.5 3 3.5 3.5 4.5 5

Face Progression (°) 0 1 2 3 4 5 11 14

Head Weight (g) 255 264 270 277 284 293 301 306.5

Shaft Length (inch) 37.75 37 36.5 36 35.5 35 34.75 34.5

Swing Weight Graphite C8 C9 D0

MENS IRONS

Shaft Options EX 320 N.S.PRO950GH

Shaft Flex SL R S R S

Total Weight (g) 364 366 368 403 407

Shaft Weight (g) 53 55 57 94.5 98

Torque (°) 3.5 3.5 3.5 2 1.8

LADIES IRONS Shaft EX 320

Shaft Flex FL

Total Weight (g) 363

Shaft Weight (g) 50

Torque (°) 4

MENS PUTTER

Loft Lie Head Weight Length

3° 71° 355g 34

LADIES PUTTER

Loft Lie Head Weight Length

3° 71° 355g 33

EZONE GT IRON - MEN’S

EZONE GT IRON - WOMEN’S

Torque (°) 5 5.5

Club Length (inch) 46 44.5

Swing Weight D5 C9

Club Weight (g) 306 308 304 306 308 304 306 287 287

(10.5 Also available in LH regular)

FAIRWAY WOOD

No. #3 #5 #7

Shaft EX 320

Shaft Flex SL R S FL SL R S FL SL R FL

Loft Angle (°) 15 18 18 21 21 24

Lie Angle (°) 58.0 (STD) 58.5 (STD) 59.0 (STD)

Face Angle (°) 1.0 Open (STD)

Volume (ml) 178 180 152 154 141 143

Head Weight (g) 217 215.5 223 222 229 229.5

Shaft Weight (g) 50 51 55 46 49 50 54 45 48 49 44

Torque (°) 4.5 5 4.5 5 4.5 5

Club Length (inch) 43.25 42.25 42.5 41.5 41.75 40.75

Swing Weight D1 C8 D1 C8 D1 C8

Club Weight (g) 320 321 325 303 325 326 330 309 330 331 314

(#3, #5 Also available in LH regular)

UTILITY

No. #3 #4 #5 #6 #7

Shaft EX 320

Shaft Flex SL R S SL R S FL SL R FL FL FL

Loft Angle (°) 19 22 25.5 29 33

Lie Angle (°) 58.5 (STD) 59.0 (STD) 59.5 (STD) 60 60.5

Face Angle (°) 1.0 Open (STD)

Volume (ml) 107 105 105 104 104 102 100

Head Weight (g) 237 244.5 244.5 253.5 262.5 271.5

Shaft Weight (g) 53 54 57 52 53 56 49 51 52 48 47 46

Torque (°) 4 4.5 4 4.5 4.5 4.5

Club Length (inch) 40.75 40 39 39.25 38.25 37.5 36.75

Swing Weight D1 D1 C8 D1 C8 C8 C8

Club Weight (g) 341 344 345 347 351 351 333 357 359 342 351 360

(#3, #4 Also available in LH regular)

MENS IRONS

No 4 5 6 7 8 9 PW AW SW

Shaft Options Graphite: EX 320 Steel: N.S.PRO950GH HT

Loft (°) 20 22 25 28 32 37 42 48 54

Lie (°) 61 61.5 62 62.5 63 63.5 64 64 64

Offset (mm) 2.5 2.5 2.5 2.5 3 3.5 3.5 4.5 5

Face progression (°) 0 0 1 2 3 4 5 11 14

Head Weight (g) 246.5 255 264 270 277 284 293 301 306.5

Shaft Length (inch) Graphite 39.5 38.75 38 37.5 37 36.5 36 35.75 35.5

Shaft Length (inch) Steel 39 38.25 37.75 37.25 36.75 36.25 35.75 35.5 35.25

Swing weight Graphite D2 (Steel D4) D3 D4

(Also available in LH Steel: R,S Graphite: SL,R,S)

LADIES IRONS

No 5 6 7 8 9 PW AW SW

Shaft Options Graphite: EX 320

Loft (°) 22 25 28 32 37 42 48 54

Lie (°) 61.5 62 62.5 63 63.5 64 64 64

Offset (mm) 2.5 2.5 2.5 3 3.5 3.5 4.5 5

Face progression (°) 0 1 2 3 4 5 11 14

Head Weight (g) 255 264 270 277 284 293 301 306.5

Shaft Length (inch) 37.75 37 36.5 36 35.5 35 34.75 34.5

Swing weight Graphite C8 C9 D0

MENS IRONS

Shaft Options EX 320 N.S.PRO950GH HT

Shaft Flex SL R S R S

Total Weight (g) 364 366 368 403 407

Shaft Weight (g) 53 55 57 94.5 98

Torque (°) 3.5 3.5 3.5 2 1.8

LADIES IRONS

Shaft Options EX 320

Shaft Flex FL

Total Weight (g) 363

Shaft Weight (g) 50

Torque (°) 4

MENS PUTTER

Loft (°) Lie (°) Head Weight (g) Length (inch)

3 71 355 34

LADIES PUTTER

Loft (°) Lie (°) Head Weight (g) Length (inch)

3 71 355 33

PUTTER - MEN’S PUTTER - WOMEN’S

Head Construction: SUS431 Stainless Steel Precision Casting Carbon Graphite Composite.Shaft Construction: Original Putter Shaft (Steel). Grip: Original PU Rubber

Women's

Women's

Men's

Men's

EZONE GT IronThe G-BRID (Graphite Hybrid) head construction is currently used to great success on tour. The next-generation of irons with a superb ball flight and super soft feel off the face.

EZONE GT PutterThe G-BRID head construction provides the optimum centre of gravity whilst expanding the sweet spot for improved accuracy and a soft feel off the face. The CNC milling on the face applies the optimal ball contact to generate the desired forward rotation for a smooth roll at the hole.

Page 13: The spirit of ‘Made in Japan’€¦ · 40 REXIS XELA SHAFTS 41 REXIS KAIZA SHAFTS GOLF GEAR 43 BAGS / ACCESSORIES. The spirit of ‘Made in Japan’ craftsmanship and technology

EZONE GT / IRON12 EZONE GT / PUTTER 13

N.S.PRO950GHEX 320 for EZONE GT: Graphite Shaft Original grip (round with Yonex logo)50g size 60 /

Shaft Name EX 320

Shaft Flex R S SL R S SL R FL FL

Loft Angle(°) 9 10.5 12 14

Lie Angle (°) 59.0 (STD)

Face Angle (°) 0.5 Open (STD)

Volume (ml) 450

Head Weight (g) 202.0 (Including 8g sleeve)

Shaft Weight (g) 51 53 49 51 53 49 51 44 44

Torque (°) 5 5.5

Club Length (inches) 46 44.5

Swing Weight (g) D5 C9

Club Weight (g) 306 308 304 306 308 304 306 287 287

FAIRWAY WOOD (#3, #5 Also available in LH regular)

No. #3 #5 #7

Shaft EX 320

Shaft Flex SL R S FL SL R S FL SL R FL

Loft Angle (°) 15 18 18 21 21 24

Lie Angle (°) 58.0 (STD) 58.5 (STD) 59.0 (STD)

Face Angle (°) 1.0 Open (STD)

Volume (ml) 178 180 152 154 141 143

Head Weight (g) 217 215.5 223 222 229 229.5

Shaft Weight (g) 50 51 55 46 49 50 54 45 48 49 44

Torque (°) 4.5 5 4.5 5 4.5 5

Club Length (inch) 43.25 42.25 42.5 41.5 41.75 40.75

Swing Weight D1 C8 D1 C8 D1 C8

Club Weight (g) 320 321 325 303 325 326 330 309 330 331 314

UTILITY (#3, #4 Also available in LH regular)

No. #3 #4 #5 #6 #7

Shaft EX 320

Shaft Flex SL R S SL R S FL SL R FL FL FL

Loft Angle (°) 19 22 25.5 29 33

Lie Angle (°) 58.5 (STD) 59.0 (STD) 59.5 (STD) 60 60.5

Face Angle (°) 1.0 Open (STD)

Volume (ml) 107 105 105 104 104 102 100

Head Weight (g) 237 244.5 244.5 253.5 253.5 253.5 262.5 271.5

Shaft Weight (g) 53 54 57 52 53 56 49 51 52 48 47 46

Torque (°) 4 4.5 4 4.5 4.5 4.5

Club Length (inch) 40.75 40 39 39.25 38.25 37.5 36.75

Swing Weight D1 D1 C8 D1 C8 C8 C8

Club Weight (g) 341 344 345 347 351 351 333 357 359 342 351 360

MENS IRONS Also available in LH Steel: R,S Graphite: SL,R,S

No. 4 5 6 7 8 9 PW AW SW

Shaft Option Graphite EX 320 Steel N.S.PRO950GH

Loft Angle (STD) 20 22 25 28 32 37 42 48 54

Lie Angle (°) 61 61.5 62 62.5 63 63.5 64 64 64

Offset (mm) 2.5 2.5 2.5 2.5 3 3.5 3.5 4.5 5

Face Progression (°) 0 0 1 2 3 4 5 11 14

Head Weight (g) 246.5 255 264 270 277 284 293 301 306.5

Shaft Length (inch) Graphite 39.5 38.75 38 37.5 37 36.5 36 35.75 35.5

Steel 39 38.25 37.75 37.25 36.75 36.25 35.75 35.5 35.25

Swing Weight Graphite D2 (Steel D4) D3 D4

LADIES IRONS

No 5 6 7 8 9 PW AW SW

Shaft Options Graphite EX 320

Loft Angle (°) 22 25 28 32 37 42 48 54

Lie Angle (°) 61.5 62 62.5 63 63.5 64 64 64

Offset (mm) 2.5 2.5 2.5 3 3.5 3.5 4.5 5

Face progression (°) 0 1 2 3 4 5 11 14

Head Weight (g) 255 264 270 277 284 293 301 306.5

Shaft Length (inch) 37.75 37 36.5 36 35.5 35 34.75 34.5

Swing weight Graphite C8 C9 D0

Shaft Option EX 320 N.S.PRO950GH

Shaft Flex SL R S R S

Total Weight (g) 364 366 368 403 407

Shaft Weight (g) 53 55 57 94.5 98

Torque (°) 3.5 3.5 3.5 2 1.8

LADIES IRONS

Shaft Options EX 320

Shaft Flex FL

Total Weight (g) 363

Shaft Weight (g) 50

Torque (°) 4

MENS PUTTER

Loft Lie Head Weight Length

3° 71° 355g 34

LADIES PUTTER

Loft Lie Head Weight Length

3° 71° 355g 33

Lie Angle (°) 59.0 (STD)

Face Angle (°) 0.5 Open (STD)

Volume (ml) 450

Head Weight (g) 202.0 (Including 8g sleeve)

Shaft Weight (g) 51 53 49 51 53 49 51 44 44

Torque (°) 5 5.5

Club Length (inches) 46 44.5

Swing Weight (g) D5 C9

Club Weight (g) 306 308 304 306 308 304 306 287 287

FAIRWAY WOOD (#3, #5 Also available in LH regular)

No. #3 #5 #7

Shaft EX 320

Shaft Flex SL R S FL SL R S FL SL R FL

Loft Angle (°) 15 18 18 21 21 24

Lie Angle (°) 58.0 (STD) 58.5 (STD) 59.0 (STD)

Face Angle (°) 1.0 Open (STD)

Volume (ml) 178 180 152 154 141 143

Head Weight (g) 217 215.5 223 222 229 229.5

Shaft Weight (g) 50 51 55 46 49 50 54 45 48 49 44

Torque (°) 4.5 5 4.5 5 4.5 5

Club Length (inch) 43.25 42.25 42.5 41.5 41.75 40.75

Swing Weight D1 C8 D1 C8 D1 C8

Club Weight (g) 320 321 325 303 325 326 330 309 330 331 314

UTILITY (#3, #4 Also available in LH regular)

No. #3 #4 #5 #6 #7

Shaft EX 320

Shaft Flex SL R S SL R S FL SL R FL FL FL

Loft Angle (°) 19 22 25.5 29 33

Lie Angle (°) 58.5 (STD) 59.0 (STD) 59.5 (STD) 60 60.5

Face Angle (°) 1.0 Open (STD)

Volume (ml) 107 105 105 104 104 102 100

Head Weight (g) 237 244.5 244.5 253.5 253.5 253.5 262.5 271.5

Shaft Weight (g) 53 54 57 52 53 56 49 51 52 48 47 46

Torque (°) 4 4.5 4 4.5 4.5 4.5

Club Length (inch) 40.75 40 39 39.25 38.25 37.5 36.75

Swing Weight D1 D1 C8 D1 C8 C8 C8

Club Weight (g) 341 344 345 347 351 351 333 357 359 342 351 360

MENS IRONS (Also available in LH Steel: R,S Graphite:SL,R,S)

No 4 5 6 7 8 9 PW AW SW

Shaft Options Graphite EX 320 Steel N.S.PRO950GH

Loft Angle (STD) 20 22 25 28 32 37 42 48 54

Lie Angle (°) 61 61.5 62 62.5 63 63.5 64 64 64

Offset (mm) 2.5 2.5 2.5 2.5 3 3.5 3.5 4.5 5

Face progression (°) 0 0 1 2 3 4 5 11 14

Head Weight (g) 246.5 255 264 270 277 284 293 301 306.5

Shaft Length (inch) Graphite 39.5 38.75 38 37.5 37 36.5 36 35.75 35.5

Steel 39 38.25 37.75 37.25 36.75 36.25 35.75 35.5 35.25

Swing weight Graphite D2 (Steel D4) D3 D4

LADIES IRONS

No. 5 6 7 8 9 PW AW SW

Shaft Graphite EX 320

Loft Angle (°) 22 25 28 32 37 42 48 54

Lie Angle (°) 61.5 62 62.5 63 63.5 64 64 64

Offset (mm) 2.5 2.5 2.5 3 3.5 3.5 4.5 5

Face Progression (°) 0 1 2 3 4 5 11 14

Head Weight (g) 255 264 270 277 284 293 301 306.5

Shaft Length (inch) 37.75 37 36.5 36 35.5 35 34.75 34.5

Swing Weight Graphite C8 C9 D0

MENS IRONS

Shaft Options EX 320 N.S.PRO950GH

Shaft Flex SL R S R S

Total Weight (g) 364 366 368 403 407

Shaft Weight (g) 53 55 57 94.5 98

Torque (°) 3.5 3.5 3.5 2 1.8

LADIES IRONS Shaft EX 320

Shaft Flex FL

Total Weight (g) 363

Shaft Weight (g) 50

Torque (°) 4

MENS PUTTER

Loft Lie Head Weight Length

3° 71° 355g 34

LADIES PUTTER

Loft Lie Head Weight Length

3° 71° 355g 33

EZONE GT IRON - MEN’S

EZONE GT IRON - WOMEN’S

Torque (°) 5 5.5

Club Length (inch) 46 44.5

Swing Weight D5 C9

Club Weight (g) 306 308 304 306 308 304 306 287 287

(10.5 Also available in LH regular)

FAIRWAY WOOD

No. #3 #5 #7

Shaft EX 320

Shaft Flex SL R S FL SL R S FL SL R FL

Loft Angle (°) 15 18 18 21 21 24

Lie Angle (°) 58.0 (STD) 58.5 (STD) 59.0 (STD)

Face Angle (°) 1.0 Open (STD)

Volume (ml) 178 180 152 154 141 143

Head Weight (g) 217 215.5 223 222 229 229.5

Shaft Weight (g) 50 51 55 46 49 50 54 45 48 49 44

Torque (°) 4.5 5 4.5 5 4.5 5

Club Length (inch) 43.25 42.25 42.5 41.5 41.75 40.75

Swing Weight D1 C8 D1 C8 D1 C8

Club Weight (g) 320 321 325 303 325 326 330 309 330 331 314

(#3, #5 Also available in LH regular)

UTILITY

No. #3 #4 #5 #6 #7

Shaft EX 320

Shaft Flex SL R S SL R S FL SL R FL FL FL

Loft Angle (°) 19 22 25.5 29 33

Lie Angle (°) 58.5 (STD) 59.0 (STD) 59.5 (STD) 60 60.5

Face Angle (°) 1.0 Open (STD)

Volume (ml) 107 105 105 104 104 102 100

Head Weight (g) 237 244.5 244.5 253.5 262.5 271.5

Shaft Weight (g) 53 54 57 52 53 56 49 51 52 48 47 46

Torque (°) 4 4.5 4 4.5 4.5 4.5

Club Length (inch) 40.75 40 39 39.25 38.25 37.5 36.75

Swing Weight D1 D1 C8 D1 C8 C8 C8

Club Weight (g) 341 344 345 347 351 351 333 357 359 342 351 360

(#3, #4 Also available in LH regular)

MENS IRONS

No 4 5 6 7 8 9 PW AW SW

Shaft Options Graphite: EX 320 Steel: N.S.PRO950GH HT

Loft (°) 20 22 25 28 32 37 42 48 54

Lie (°) 61 61.5 62 62.5 63 63.5 64 64 64

Offset (mm) 2.5 2.5 2.5 2.5 3 3.5 3.5 4.5 5

Face progression (°) 0 0 1 2 3 4 5 11 14

Head Weight (g) 246.5 255 264 270 277 284 293 301 306.5

Shaft Length (inch) Graphite 39.5 38.75 38 37.5 37 36.5 36 35.75 35.5

Shaft Length (inch) Steel 39 38.25 37.75 37.25 36.75 36.25 35.75 35.5 35.25

Swing weight Graphite D2 (Steel D4) D3 D4

(Also available in LH Steel: R,S Graphite: SL,R,S)

LADIES IRONS

No 5 6 7 8 9 PW AW SW

Shaft Options Graphite: EX 320

Loft (°) 22 25 28 32 37 42 48 54

Lie (°) 61.5 62 62.5 63 63.5 64 64 64

Offset (mm) 2.5 2.5 2.5 3 3.5 3.5 4.5 5

Face progression (°) 0 1 2 3 4 5 11 14

Head Weight (g) 255 264 270 277 284 293 301 306.5

Shaft Length (inch) 37.75 37 36.5 36 35.5 35 34.75 34.5

Swing weight Graphite C8 C9 D0

MENS IRONS

Shaft Options EX 320 N.S.PRO950GH HT

Shaft Flex SL R S R S

Total Weight (g) 364 366 368 403 407

Shaft Weight (g) 53 55 57 94.5 98

Torque (°) 3.5 3.5 3.5 2 1.8

LADIES IRONS

Shaft Options EX 320

Shaft Flex FL

Total Weight (g) 363

Shaft Weight (g) 50

Torque (°) 4

MENS PUTTER

Loft (°) Lie (°) Head Weight (g) Length (inch)

3 71 355 34

LADIES PUTTER

Loft (°) Lie (°) Head Weight (g) Length (inch)

3 71 355 33

PUTTER - MEN’S PUTTER - WOMEN’S

Head Construction: SUS431 Stainless Steel Precision Casting Carbon Graphite Composite.Shaft Construction: Original Putter Shaft (Steel). Grip: Original PU Rubber

Women's

Women's

Men's

Men's

EZONE GT IronThe G-BRID (Graphite Hybrid) head construction is currently used to great success on tour. The next-generation of irons with a superb ball flight and super soft feel off the face.

EZONE GT PutterThe G-BRID head construction provides the optimum centre of gravity whilst expanding the sweet spot for improved accuracy and a soft feel off the face. The CNC milling on the face applies the optimal ball contact to generate the desired forward rotation for a smooth roll at the hole.

Page 14: The spirit of ‘Made in Japan’€¦ · 40 REXIS XELA SHAFTS 41 REXIS KAIZA SHAFTS GOLF GEAR 43 BAGS / ACCESSORIES. The spirit of ‘Made in Japan’ craftsmanship and technology

N.S.PRO MODUS3 TOUR105

3

20

59.5

1

39

4

22

60

2

38.5

4.0 5.5

5

25

60.5

3

38

6

28

61

4.5

4

37.5

N.S.PRO MODUS3 TOUR105 (Mid)

D1

N.S.PRO MODUS3 TOUR105

S

407

106.5

1.7

8

36

62

5.0

6

36.5

9

41

62.5

7

36

PW

46

63

8

35.5

7

32

61.5

5

37

Uneven distribution and size of iron material.

Even distribution and uniform size of iron material offers softer feel on contact.

EZONE CB 501

EZONE CB 501 Forged IronThe G-BRID (Graphite Hybrid) technology and Vacuum Heat Treatment provide next level super soft feel.

Vacuum Heat Treatment*: This new manufacturing technique improves the hitting feel more than traditional forgings. The new Vacuum Heat Treatment manufacturing technique makes the forging 20% softer than other forgings for maximum ball control and a super soft feel preferred by professionals and advanced players. *Vacuum Heat Treatment has a patent pending in Japan

G-BRID (Graphite Hybrid) Technology: Improved ball striking feel and a lower and deeper centre of gravityBy filling the cavity with a Graphite dampening material (G-BRID) there is a reduction in unwanted vibrations achieving an improved ball striking feel. It also produces a lower and deeper centre of gravity, increasing the size of the sweet area for improved playability.

No.

Shaft

Loft (°)

Lie (°)

Bounce (°)�

Face Progression (mm)

Shaft Length (inch)

Swing Weight

Shaft (#5)

Flex

Total Weight (g)

Shaft Weight (g)

Torque (°)

Head material manufacturing method. Body: Forged S25C Steel + Graphite Hybrid / Made in Japan

Tour Velvet (with Yonex logo)

Unprocessed forging

Steel shaft spec is published value by the manufacturer

Left Hand also available

Redefining the performance of traditional forged irons

EZONE GRAPHITE HYBRID / FORGED IRONS14 EZONE GRAPHITE HYBRID / FORGED IRON 15

Page 15: The spirit of ‘Made in Japan’€¦ · 40 REXIS XELA SHAFTS 41 REXIS KAIZA SHAFTS GOLF GEAR 43 BAGS / ACCESSORIES. The spirit of ‘Made in Japan’ craftsmanship and technology

N.S.PRO MODUS3 TOUR105

3

20

59.5

1

39

4

22

60

2

38.5

4.0 5.5

5

25

60.5

3

38

6

28

61

4.5

4

37.5

N.S.PRO MODUS3 TOUR105 (Mid)

D1

N.S.PRO MODUS3 TOUR105

S

407

106.5

1.7

8

36

62

5.0

6

36.5

9

41

62.5

7

36

PW

46

63

8

35.5

7

32

61.5

5

37

Uneven distribution and size of iron material.

Even distribution and uniform size of iron material offers softer feel on contact.

EZONE CB 501

EZONE CB 501 Forged IronThe G-BRID (Graphite Hybrid) technology and Vacuum Heat Treatment provide next level super soft feel.

Vacuum Heat Treatment*: This new manufacturing technique improves the hitting feel more than traditional forgings. The new Vacuum Heat Treatment manufacturing technique makes the forging 20% softer than other forgings for maximum ball control and a super soft feel preferred by professionals and advanced players. *Vacuum Heat Treatment has a patent pending in Japan

G-BRID (Graphite Hybrid) Technology: Improved ball striking feel and a lower and deeper centre of gravityBy filling the cavity with a Graphite dampening material (G-BRID) there is a reduction in unwanted vibrations achieving an improved ball striking feel. It also produces a lower and deeper centre of gravity, increasing the size of the sweet area for improved playability.

No.

Shaft

Loft (°)

Lie (°)

Bounce (°)�

Face Progression (mm)

Shaft Length (inch)

Swing Weight

Shaft (#5)

Flex

Total Weight (g)

Shaft Weight (g)

Torque (°)

Head material manufacturing method. Body: Forged S25C Steel + Graphite Hybrid / Made in Japan

Tour Velvet (with Yonex logo)

Unprocessed forging

Steel shaft spec is published value by the manufacturer

Left Hand also available

Redefining the performance of traditional forged irons

EZONE GRAPHITE HYBRID / FORGED IRONS14 EZONE GRAPHITE HYBRID / FORGED IRON 15

Page 16: The spirit of ‘Made in Japan’€¦ · 40 REXIS XELA SHAFTS 41 REXIS KAIZA SHAFTS GOLF GEAR 43 BAGS / ACCESSORIES. The spirit of ‘Made in Japan’ craftsmanship and technology

The G-BRID (Graphite Hybrid) technology allows tournament players irons to combine the control of a Muscle Back with the playability of a Cavity iron.

N1-MB Forged IronAdvanced G-BRID (Graphite Hybrid) Forged Muscle Back Iron.Highly desirable super soft feel with maximum control.

EZONE N1-WThe integration of advanced technology, the Graphite Hybrid Forged Wedge. The Graphite dampening material improves the ball striking feel for easier swings and maximum spin control.

N.S.PRO MODUS3 SYSTEM3 TOUR125 Tour Velvet (With Yonex logo)

By filling the cavity with a Graphite dampening material (G-BRID) there is a reduction in unwanted vibrations achieving an improved ball striking feel. It also produces a lower and deeper centre of gravity, increasing the size of the sweet area for improved playability.

G-BRID (Graphite Hybrid) Technology:

Despite a wider sole design, the 3D Round Sole ensures minimal turf drag for maximum control.

3D Round Sole Design

N1-MB N1-WShaft/Grip

Steel shaft spec is published value by the manufacturer

Iron #

Shaft

Loft (°)

Lie (°)

Face Progression (mm)

Bounce (°)�

Shaft Length (inch)

Swing Weight

Shaft (#5)

Flex

Total Weight (g)

Shaft Weight (g)

Torque (°)

Head material manufacturing method. Body: Forged S25C Steel + Graphite Hybrid / Made in Japan

3

21

60

1.5

39

4

24

60.5

2.5

38.5

5

27

61

3.5

38

6

31

61.5

4.5

37.5

N.S.PRO MODUS3 SYSTEM3 TOUR125 (Low)

5.2

D2

N.S.PRO MODUS3 SYSTEM3 TOUR125

S

428

128.5

1.5

8

39

62.5

6.5

36.5

9

43

63

7.5

36

PW

47

63.5

8.5

35.5

7

35

62

5.5

37

The slightly larger but rounded sole enhances spin control while reducing turf interaction.

3D Round Sole Design

Steel shaft spec is published value by the manufacturer

Iron #

Shaft

Loft (°)

Lie (°)

Face Progression (mm)

Bounce (°)�

Shaft Length (inch)

Swing Weight

Flex

Total Weight (g)

Shaft Weight (g)

Torque (°)

Head material manufacturing method. Body: Forged S25C Steel + Graphite Hybrid / Made in Japan

52/10

52

63.5

5.7

10.0

35.5

D2

467

58/10

58

63.5

5.8

10.0

35.25

472

D3

56/12

N.S.PRO MODUS3 SYSTEM3 TOUR125 (Low)

56

63.5

5.7

12.0

35.375

S

471

128.5

1.5

Utilising the new Graphite dampening material behind the face reduces unwanted vibrations for improved feel and holds the ball on the face for maximum control.

G-BRID (Graphite Hybrid) Technology

N.S.PRO MODUS3 SYSTEM3 TOUR125 Tour Velvet (with Yonex logo)

No.

Shaft

Loft (°)

Lie (°)

Bounce (°)�

Face Progression (mm)

Shaft Length (inch)

Swing Weight

Shaft (#5)

Flex

Total Weight (g)

Shaft Weight (g)

Torque (°)

Head material manufacturing method. Body: Forged S25C Steel + Graphite Composite / Made in Japan

3

20

60

2

39

4

23

60.5

3

38.5

5

26

61

4

38

6

30

61.5

5

37.5

N.S.PRO MODUS3 SYSTEM3 TOUR125 (High)

5.4

D2

5.2

N.S.PRO MODUS3 SYSTEM3 TOUR125

S

427

128.5

1.5

8

38

62.5

7

36.5

9

42

63

8

36

PW

46

63.5

9

35.5

7

34

62

6

37

Steel shaft spec is published value by the manufacturer

EZONE CB 301 Forged Iron

Uneven distribution and size of iron material.

Even distribution and uniform size of iron material offers softer feel on contact.

EZONE CB 301Unprocessed forging

EZONE GRAPHITE HYBRID / FORGED IRON16 EZONE GRAPHITE HYBRID / FORGED IRON / WEDGE 17

Vacuum Heat Treatment*: This new manufacturing technique improves the hitting feel more than traditional forgings. The new Vacuum Heat Treatment manufacturing technique makes the forging 20% softer than other forgings for maximum ball control and a super soft feel preferred by professionals and advanced players. *Vacuum Heat Treatment has a patent pending in Japan

G-BRID (Graphite Hybrid) Technology:Improved ball striking feel and a lower and deeper centre of gravityBy filling the cavity with a Graphite dampening material (G-BRID) there is a reduction in unwanted vibrations achieving an improved ball striking feel. It also produces a lower and deeper centre of gravity, increasing the size of the sweet area for improved playability.

Page 17: The spirit of ‘Made in Japan’€¦ · 40 REXIS XELA SHAFTS 41 REXIS KAIZA SHAFTS GOLF GEAR 43 BAGS / ACCESSORIES. The spirit of ‘Made in Japan’ craftsmanship and technology

The G-BRID (Graphite Hybrid) technology allows tournament players irons to combine the control of a Muscle Back with the playability of a Cavity iron.

N1-MB Forged IronAdvanced G-BRID (Graphite Hybrid) Forged Muscle Back Iron.Highly desirable super soft feel with maximum control.

EZONE N1-WThe integration of advanced technology, the Graphite Hybrid Forged Wedge. The Graphite dampening material improves the ball striking feel for easier swings and maximum spin control.

N.S.PRO MODUS3 SYSTEM3 TOUR125 Tour Velvet (With Yonex logo)

By filling the cavity with a Graphite dampening material (G-BRID) there is a reduction in unwanted vibrations achieving an improved ball striking feel. It also produces a lower and deeper centre of gravity, increasing the size of the sweet area for improved playability.

G-BRID (Graphite Hybrid) Technology:

Despite a wider sole design, the 3D Round Sole ensures minimal turf drag for maximum control.

3D Round Sole Design

N1-MB N1-WShaft/Grip

Steel shaft spec is published value by the manufacturer

Iron #

Shaft

Loft (°)

Lie (°)

Face Progression (mm)

Bounce (°)�

Shaft Length (inch)

Swing Weight

Shaft (#5)

Flex

Total Weight (g)

Shaft Weight (g)

Torque (°)

Head material manufacturing method. Body: Forged S25C Steel + Graphite Hybrid / Made in Japan

3

21

60

1.5

39

4

24

60.5

2.5

38.5

5

27

61

3.5

38

6

31

61.5

4.5

37.5

N.S.PRO MODUS3 SYSTEM3 TOUR125 (Low)

5.2

D2

N.S.PRO MODUS3 SYSTEM3 TOUR125

S

428

128.5

1.5

8

39

62.5

6.5

36.5

9

43

63

7.5

36

PW

47

63.5

8.5

35.5

7

35

62

5.5

37

The slightly larger but rounded sole enhances spin control while reducing turf interaction.

3D Round Sole Design

Steel shaft spec is published value by the manufacturer

Iron #

Shaft

Loft (°)

Lie (°)

Face Progression (mm)

Bounce (°)�

Shaft Length (inch)

Swing Weight

Flex

Total Weight (g)

Shaft Weight (g)

Torque (°)

Head material manufacturing method. Body: Forged S25C Steel + Graphite Hybrid / Made in Japan

52/10

52

63.5

5.7

10.0

35.5

D2

467

58/10

58

63.5

5.8

10.0

35.25

472

D3

56/12

N.S.PRO MODUS3 SYSTEM3 TOUR125 (Low)

56

63.5

5.7

12.0

35.375

S

471

128.5

1.5

Utilising the new Graphite dampening material behind the face reduces unwanted vibrations for improved feel and holds the ball on the face for maximum control.

G-BRID (Graphite Hybrid) Technology

N.S.PRO MODUS3 SYSTEM3 TOUR125 Tour Velvet (with Yonex logo)

No.

Shaft

Loft (°)

Lie (°)

Bounce (°)�

Face Progression (mm)

Shaft Length (inch)

Swing Weight

Shaft (#5)

Flex

Total Weight (g)

Shaft Weight (g)

Torque (°)

Head material manufacturing method. Body: Forged S25C Steel + Graphite Composite / Made in Japan

3

20

60

2

39

4

23

60.5

3

38.5

5

26

61

4

38

6

30

61.5

5

37.5

N.S.PRO MODUS3 SYSTEM3 TOUR125 (High)

5.4

D2

5.2

N.S.PRO MODUS3 SYSTEM3 TOUR125

S

427

128.5

1.5

8

38

62.5

7

36.5

9

42

63

8

36

PW

46

63.5

9

35.5

7

34

62

6

37

Steel shaft spec is published value by the manufacturer

EZONE CB 301 Forged Iron

Uneven distribution and size of iron material.

Even distribution and uniform size of iron material offers softer feel on contact.

EZONE CB 301Unprocessed forging

EZONE GRAPHITE HYBRID / FORGED IRON16 EZONE GRAPHITE HYBRID / FORGED IRON / WEDGE 17

Vacuum Heat Treatment*: This new manufacturing technique improves the hitting feel more than traditional forgings. The new Vacuum Heat Treatment manufacturing technique makes the forging 20% softer than other forgings for maximum ball control and a super soft feel preferred by professionals and advanced players. *Vacuum Heat Treatment has a patent pending in Japan

G-BRID (Graphite Hybrid) Technology:Improved ball striking feel and a lower and deeper centre of gravityBy filling the cavity with a Graphite dampening material (G-BRID) there is a reduction in unwanted vibrations achieving an improved ball striking feel. It also produces a lower and deeper centre of gravity, increasing the size of the sweet area for improved playability.

Page 18: The spirit of ‘Made in Japan’€¦ · 40 REXIS XELA SHAFTS 41 REXIS KAIZA SHAFTS GOLF GEAR 43 BAGS / ACCESSORIES. The spirit of ‘Made in Japan’ craftsmanship and technology

XELA for Royal (NANOMETRIC DR Graphite) Original Tungsten Balance Grip

Royal EZONE DriverHigher launch, more forgiving, maximised distance.

Shaft

Shaft Flex

Loft Angle (°)

Lie Angle (°)

Face Angle (°)

Volume (ml)

Shaft Weight (g)

Torque (°)

Club Length (inch)

Club Weight (g)

Swing Weight

XELA for Royal (Low)

58.5

0

460

5.6

47

5.6

47

R

10

41.5

285

D0

Light R

35

9.1

46

278

C5

Light R

35

9.1

46

278

C5

R

11.5

41.5

285

D0

SR

43.5

287

D0.5

SR

43.5

287

D0.5

Head Construction, Body: 6Al-4V Titanium Precision Casting, Face: Rolled SP-700HM Titanium Plate, Crown: TOUGH G-FIBER Reinforced High Intensity Graphite / Made in Japan

Our biggest ever sweet spot. The Graphite Crown makes up 45% of the head producing a wider sweet area.

Unique Innovative Yonex technology to inspire your game.

Enlarged Graphite Crown

Tungsten Balanced

Grip

Centre of gravity depth: 35.5mm / Centre of gravitydistance: 38.0mm / Centre of gravity height: 26.2mm / Face height: 51.0mm

Test Data

Royal EZONE Driver

Conventional driver

Yonex machine tested, at the same swing speed

Head Speed (mph)

85.00

85.67

Ball Speed (mph)

120.79

121.46

Spin (rpm)

2,995

2,696

Launch Angle (°)

15.8

15.3

Carry Distance (yds)

189.1

188.6

Total Distance (yds)

213.1

211.3

High launch angle and optimal spin combine to increase distance.

TOUGH G-FIBERSurface area

Head cover

The start of a new era in distance

Torque wrench

QUICK ADJUSTSYSTEM

Evolved Dual Tungsten Power SystemThe secret to greater distance is the new evolved Dual Tungsten Power System. The Tungsten weighting in the grip is combined with a unique Graphite Crown head construction that utilises a new revolutionary Vacuum Internal Pressure Molding production method with the new TOUGH G-FIBER material. Expertise from the lightest REXIS XELA is used to produce a special lightweight shaft, resulting in high repulsion and superior distance.

TOUGH G-FIBER Graphite Crown combined headThe vacuum pressure molded Graphite Crown is thinner yet stronger. Additionally, a new TOUGH G-FIBER composed of Graphite nanotubes and glass fibre, about 3 times the flexibility of Graphite, is added. This creates a high flex Graphite Crown with enhanced repulsion power, producing greater distances when compared to other hot drivers.

ROYAL EZONE / TECHNOLOGY18 ROYAL EZONE / DRIVER 19

Page 19: The spirit of ‘Made in Japan’€¦ · 40 REXIS XELA SHAFTS 41 REXIS KAIZA SHAFTS GOLF GEAR 43 BAGS / ACCESSORIES. The spirit of ‘Made in Japan’ craftsmanship and technology

XELA for Royal (NANOMETRIC DR Graphite) Original Tungsten Balance Grip

Royal EZONE DriverHigher launch, more forgiving, maximised distance.

Shaft

Shaft Flex

Loft Angle (°)

Lie Angle (°)

Face Angle (°)

Volume (ml)

Shaft Weight (g)

Torque (°)

Club Length (inch)

Club Weight (g)

Swing Weight

XELA for Royal (Low)

58.5

0

460

5.6

47

5.6

47

R

10

41.5

285

D0

Light R

35

9.1

46

278

C5

Light R

35

9.1

46

278

C5

R

11.5

41.5

285

D0

SR

43.5

287

D0.5

SR

43.5

287

D0.5

Head Construction, Body: 6Al-4V Titanium Precision Casting, Face: Rolled SP-700HM Titanium Plate, Crown: TOUGH G-FIBER Reinforced High Intensity Graphite / Made in Japan

Our biggest ever sweet spot. The Graphite Crown makes up 45% of the head producing a wider sweet area.

Unique Innovative Yonex technology to inspire your game.

Enlarged Graphite Crown

Tungsten Balanced

Grip

Centre of gravity depth: 35.5mm / Centre of gravitydistance: 38.0mm / Centre of gravity height: 26.2mm / Face height: 51.0mm

Test Data

Royal EZONE Driver

Conventional driver

Yonex machine tested, at the same swing speed

Head Speed (mph)

85.00

85.67

Ball Speed (mph)

120.79

121.46

Spin (rpm)

2,995

2,696

Launch Angle (°)

15.8

15.3

Carry Distance (yds)

189.1

188.6

Total Distance (yds)

213.1

211.3

High launch angle and optimal spin combine to increase distance.

TOUGH G-FIBERSurface area

Head cover

The start of a new era in distance

Torque wrench

QUICK ADJUSTSYSTEM

Evolved Dual Tungsten Power SystemThe secret to greater distance is the new evolved Dual Tungsten Power System. The Tungsten weighting in the grip is combined with a unique Graphite Crown head construction that utilises a new revolutionary Vacuum Internal Pressure Molding production method with the new TOUGH G-FIBER material. Expertise from the lightest REXIS XELA is used to produce a special lightweight shaft, resulting in high repulsion and superior distance.

TOUGH G-FIBER Graphite Crown combined headThe vacuum pressure molded Graphite Crown is thinner yet stronger. Additionally, a new TOUGH G-FIBER composed of Graphite nanotubes and glass fibre, about 3 times the flexibility of Graphite, is added. This creates a high flex Graphite Crown with enhanced repulsion power, producing greater distances when compared to other hot drivers.

ROYAL EZONE / TECHNOLOGY18 ROYAL EZONE / DRIVER 19

Page 20: The spirit of ‘Made in Japan’€¦ · 40 REXIS XELA SHAFTS 41 REXIS KAIZA SHAFTS GOLF GEAR 43 BAGS / ACCESSORIES. The spirit of ‘Made in Japan’ craftsmanship and technology

Royal EZONE IronStrike the ball with increased power and superior feel from the Graphite insert.

The perfect fusion of power and feel

Royal EZONE Hybrid FairwayNew Hybrid Fairway with the power of a wood and the controllability of an iron.

Head Construction, Body: 6Al-4V Titanium Precision Casting, Face: Rolled SP-700HM Titanium Plate, Crown: TOUGH G-FIBER Reinforced High Intensity Graphite / Made in Japan

These 4 Fairways evenly fill the distance gaps between Driver and 7 Iron.

The flat face gives easier control.

The low 12.5mm Centre of gravity makes it easy to get the ball airborne.

3W43.25 inch

4W41.75 inch

5W40.25 inch

6W38.75 inch

Shaft

No.

Shaft Flex

Loft Angle (°)

Lie Angle (°)

Face Angle (°)

Volume (ml)

Shaft Weight (g)

Torque (°)

Club Length (inch)

Club Weight (g)

Swing Weight

XELA for Royal (Low)

0

R

38

304

C9

SR

40

306

C9.5

5.6

3

15

58.5

200

43.25

R

37

315

C9

SR

39

317

C9.5

4

18

59

168

41.75

R

37

327

C9

SR

39

329

C9.5

5.0

5

21

59.5

150

40.25

R

36

341

C9

SR

38

343

C9.5

6

24

60

135

38.75

90g of Tungstenplaced low anddeep into the sole of the club

Thin 1.8mm sole

Thin 2.0mm top edge

Thin 2.1mm face

Ultra-resilient AM355 stainless steel head provides superior power

Graphite cavity insert for improved feel

No.

Shaft

Loft Angle (°)

Lie Angle (°)

Face Progression (°)

Bounce (°)�

Length (inch)�

Swing Weight

Shaft

Shaft Flex

Total Weight (g)

Shaft Weight (g)

Torque (°)

Head Construction, #5-PW: AM Maraging Steel Precision Casting + Tungsten + Graphite Plate, #AW-SW: SUS431 Stainless Steel Precision Casting + Carbon Plate / Made in Japan

R

352

38

SR

354

40

5

23

60.5

38.75

6

25

61.0

1.5

0

38.25

7

27

61.5

37.75

8

30

62.0

2.0

1

37.25

C8

PW

39

63.0

3.0

3

36.25

AW

44

63.5

3.5

4

36.00

AS

50

63.5

4.0

6

35.75

C9

SW

56

64.0

5.0

8

35.5

D0

9

XELA for Royal (Low)

34

62.5

2.5

2

36.75

XELA for Royal

4.8

XELA for Royal (NANOMETRIC DR Graphite) Original Tungsten Balance Grip XELA for Royal (NANOMETRIC DR Carbon Graphite) Original Tungsten Balance GripHead cover

The ultra-thin blade, face and sole construction deliver maximum distance enhancing power, whilst the Graphite cavity insert ensures enhanced feel.

Centre of gravity depth: 38.1mm / Centre of gravity distance: 36.9mm / Centre of gravity height: 12.5mm / Face height: 36.0mm

ROYAL EZONE / HYBRID FAIRWAY20 ROYAL EZONE / IRON 21

Page 21: The spirit of ‘Made in Japan’€¦ · 40 REXIS XELA SHAFTS 41 REXIS KAIZA SHAFTS GOLF GEAR 43 BAGS / ACCESSORIES. The spirit of ‘Made in Japan’ craftsmanship and technology

Royal EZONE IronStrike the ball with increased power and superior feel from the Graphite insert.

The perfect fusion of power and feel

Royal EZONE Hybrid FairwayNew Hybrid Fairway with the power of a wood and the controllability of an iron.

Head Construction, Body: 6Al-4V Titanium Precision Casting, Face: Rolled SP-700HM Titanium Plate, Crown: TOUGH G-FIBER Reinforced High Intensity Graphite / Made in Japan

These 4 Fairways evenly fill the distance gaps between Driver and 7 Iron.

The flat face gives easier control.

The low 12.5mm Centre of gravity makes it easy to get the ball airborne.

3W43.25 inch

4W41.75 inch

5W40.25 inch

6W38.75 inch

Shaft

No.

Shaft Flex

Loft Angle (°)

Lie Angle (°)

Face Angle (°)

Volume (ml)

Shaft Weight (g)

Torque (°)

Club Length (inch)

Club Weight (g)

Swing Weight

XELA for Royal (Low)

0

R

38

304

C9

SR

40

306

C9.5

5.6

3

15

58.5

200

43.25

R

37

315

C9

SR

39

317

C9.5

4

18

59

168

41.75

R

37

327

C9

SR

39

329

C9.5

5.0

5

21

59.5

150

40.25

R

36

341

C9

SR

38

343

C9.5

6

24

60

135

38.75

90g of Tungstenplaced low anddeep into the sole of the club

Thin 1.8mm sole

Thin 2.0mm top edge

Thin 2.1mm face

Ultra-resilient AM355 stainless steel head provides superior power

Graphite cavity insert for improved feel

No.

Shaft

Loft Angle (°)

Lie Angle (°)

Face Progression (°)

Bounce (°)�

Length (inch)�

Swing Weight

Shaft

Shaft Flex

Total Weight (g)

Shaft Weight (g)

Torque (°)

Head Construction, #5-PW: AM Maraging Steel Precision Casting + Tungsten + Graphite Plate, #AW-SW: SUS431 Stainless Steel Precision Casting + Carbon Plate / Made in Japan

R

352

38

SR

354

40

5

23

60.5

38.75

6

25

61.0

1.5

0

38.25

7

27

61.5

37.75

8

30

62.0

2.0

1

37.25

C8

PW

39

63.0

3.0

3

36.25

AW

44

63.5

3.5

4

36.00

AS

50

63.5

4.0

6

35.75

C9

SW

56

64.0

5.0

8

35.5

D0

9

XELA for Royal (Low)

34

62.5

2.5

2

36.75

XELA for Royal

4.8

XELA for Royal (NANOMETRIC DR Graphite) Original Tungsten Balance Grip XELA for Royal (NANOMETRIC DR Carbon Graphite) Original Tungsten Balance GripHead cover

The ultra-thin blade, face and sole construction deliver maximum distance enhancing power, whilst the Graphite cavity insert ensures enhanced feel.

Centre of gravity depth: 38.1mm / Centre of gravity distance: 36.9mm / Centre of gravity height: 12.5mm / Face height: 36.0mm

ROYAL EZONE / HYBRID FAIRWAY20 ROYAL EZONE / IRON 21

Page 22: The spirit of ‘Made in Japan’€¦ · 40 REXIS XELA SHAFTS 41 REXIS KAIZA SHAFTS GOLF GEAR 43 BAGS / ACCESSORIES. The spirit of ‘Made in Japan’ craftsmanship and technology

EZONE Elite DriverThe Octaforce technology in the crown and face creates a super forgiving Driver for all levels of golfer.

The EZONE ELITE range combines cutting-edge technology, quality and unparalleled performance with maximum forgiveness.

Octaforce technology in the club face and crown provides a lower and deeper centre of gravity to give you more repulsion, optimal spin and a higher more forgiving launch.

QUICK ADJUSTSYSTEM

The new EZONE ELITE is the latest in high quality performance from Yonex.

The best by far

Octaforce technology in the crown and face gives the club a lower and deeper centre of gravity and a high-repulsion face for a higher launch, faster ball speeds and effortless power. Weight is reduced by separating 0.8mm thin sections of the crown with 0.5mm thin octagonal spaces.

The larger, forgiving club head gives players a bigger sweet spot to generate effortless distance.

The M60 shaft is 3g lighter for additional energy transfer and increased acceleration.

Quick Adjust SystemThe Quick Adjust System optimizes loft/launch through 8 settings.

S:STD

H:HIGHER+1.5LOFT

U:UPRT

L:LOWER-1.5LOFT

EZONE ELITE / DRIVER 23EZONE ELITE / TECHNOLOGY22

MENS FW

Shaft M60 LightShaft Flex SL R S SL R Loft Angle (°) 10.5 12Lie Angle (°) 59.5 (STD)Face Angle (°) 0Volume (ml) 460Head Weight (g) 199Shaft Weight (g) 58 60 65 58 60Torque (°) 5 4.8 5 5Club Length (inch) 45.75Swing Weight (g) D5Club Weight (g) 313.5 315.5 320.5 313.5 315.5

No. #3 #5 Shaft M60 LightShaft Flex SL R S SL R S

Page 23: The spirit of ‘Made in Japan’€¦ · 40 REXIS XELA SHAFTS 41 REXIS KAIZA SHAFTS GOLF GEAR 43 BAGS / ACCESSORIES. The spirit of ‘Made in Japan’ craftsmanship and technology

EZONE Elite DriverThe Octaforce technology in the crown and face creates a super forgiving Driver for all levels of golfer.

The EZONE ELITE range combines cutting-edge technology, quality and unparalleled performance with maximum forgiveness.

Octaforce technology in the club face and crown provides a lower and deeper centre of gravity to give you more repulsion, optimal spin and a higher more forgiving launch.

QUICK ADJUSTSYSTEM

The new EZONE ELITE is the latest in high quality performance from Yonex.

The best by far

Octaforce technology in the crown and face gives the club a lower and deeper centre of gravity and a high-repulsion face for a higher launch, faster ball speeds and effortless power. Weight is reduced by separating 0.8mm thin sections of the crown with 0.5mm thin octagonal spaces.

The larger, forgiving club head gives players a bigger sweet spot to generate effortless distance.

The M60 shaft is 3g lighter for additional energy transfer and increased acceleration.

Quick Adjust SystemThe Quick Adjust System optimizes loft/launch through 8 settings.

S:STD

H:HIGHER+1.5LOFT

U:UPRT

L:LOWER-1.5LOFT

EZONE ELITE / DRIVER 23EZONE ELITE / TECHNOLOGY22

MENS FW

Shaft M60 LightShaft Flex SL R S SL R Loft Angle (°) 10.5 12Lie Angle (°) 59.5 (STD)Face Angle (°) 0Volume (ml) 460Head Weight (g) 199Shaft Weight (g) 58 60 65 58 60Torque (°) 5 4.8 5 5Club Length (inch) 45.75Swing Weight (g) D5Club Weight (g) 313.5 315.5 320.5 313.5 315.5

No. #3 #5 Shaft M60 LightShaft Flex SL R S SL R S

Page 24: The spirit of ‘Made in Japan’€¦ · 40 REXIS XELA SHAFTS 41 REXIS KAIZA SHAFTS GOLF GEAR 43 BAGS / ACCESSORIES. The spirit of ‘Made in Japan’ craftsmanship and technology

EZONE Elite HybridThe lower and deeper centre or gravity ensures an effortless ball strike whatever the lie.

EZONE Elite Fairway WoodThe enlarged shallower head shape maximises forgiveness from the fairway or tee.

MENS DRIVER

MENS FW

MENS HYBRID

Shaft Name M60 LightShaft Flex SL R S SL R Loft Angle (°) 10.5 12Lie Angle (°) 59.5 (STD)Face Angle (°) 0Volume (ml) 460Head Weight (g) 199Shaft Weight (g) 58 60 65 58 60Torque (°) 5 4.8 5 5Club Length (inch) 45.75Swing Weight (g) D5Club Weight (g) 313.5 315.5 320.5 313.5 315.5

No. #3 #5 Shaft M60 LightShaft Flex SL R S SL R S Loft Angle (°) 15 18Lie Angle (°) 57.0 (STD) 57.5 (STD) Face Angle (°) 0Volume (ml) 217 213Head Weight (g) 213 217Shaft Weight (g) 52 54 57 51.0 53.0 56.0Torque (°) 5.3 5.1 4.8 5.3 5.1 4.8Club Length (inch) 43.25 42.75Swing Weight D2Club Weight (g) 321 323 326 324 326 329

No. #3 #4 #5 Shaft M60 Light

MENS DRIVER

MENS FW

MENS HYBRID

MENS IRONS

Shaft Name M60 LightShaft Flex SL R S SL R Loft Angle (°) 10.5 12Lie Angle (°) 59.5 (STD)Face Angle (°) 0Volume (ml) 460Head Weight (g) 199Shaft Weight (g) 58 60 65 58 60Torque (°) 5 4.8 5 5Club Length (inch) 45.75Swing Weight (g) D5Club Weight (g) 313.5 315.5 320.5 313.5 315.5

No. #3 #5 Shaft M60 LightShaft Flex SL R S SL R S Loft Angle (°) 15 18Lie Angle (°) 57.0 (STD) 57.5 (STD) Face Angle (°) 0Volume (ml) 217 213Head Weight (g) 213 217Shaft Weight (g) 52 54 57 51.0 53.0 56.0Torque (°) 5.3 5.1 4.8 5.3 5.1 4.8Club Length (inch) 43.25 42.75Swing Weight D2Club Weight (g) 321 323 326 324 326 329

No. #3 #4 #5 Shaft M60 LightShaft Flex SL R S SL R S SL R SLoft Angle (°) 20 23 26Lie Angle (°) 58.0 (STD) 58.5 (STD) 59.0 (STD) Face Angle (°) 0.5 Open (STD) Volume (ml) 108 107 106Head Weight (g) 239 244 250Shaft Weight (g) 61 62 65 60 61 64 59 60 63Torque (°) 4.0Club Length (inch) 40 39.5 39Swing Weight D1.5Club Weight (g) 356 357 360 360 361 364 365 366 369

Left Hand also available

No. 4 5 6 7 8 9 PW AW SWShaft Options Graphite: M60 Light Steel: FST-115

The larger, shallower club head maximises forgiveness.

The lightweight M60 shaft provides additional energy transfer and increased acceleration.

The lightweight M60 shaft provides additional energy transfer and increased acceleration.

Octaforce technology in the crown and face gives the club a lower and deeper centre of gravity and a high-repulsion face for a higher launch, faster ball speeds and effortless power. Weight is reduced by separating 0.8mm thin sections of the crown with 0.5mm thin octagonal spaces.

Octaforce technology in the crown and face gives the club a lower and deeper centre of gravity and a high-repulsion face for a higher launch, faster ball speeds and effortless power. Weight is reduced by separating 0.8mm thin sections of the crown with 0.5mm thin octagonal spaces.

The larger, shallower club head maximises forgiveness.

EZONE ELITE / FAIRWAY WOOD24 EZONE ELITE / HYBRID 25

Page 25: The spirit of ‘Made in Japan’€¦ · 40 REXIS XELA SHAFTS 41 REXIS KAIZA SHAFTS GOLF GEAR 43 BAGS / ACCESSORIES. The spirit of ‘Made in Japan’ craftsmanship and technology

EZONE Elite HybridThe lower and deeper centre or gravity ensures an effortless ball strike whatever the lie.

EZONE Elite Fairway WoodThe enlarged shallower head shape maximises forgiveness from the fairway or tee.

MENS DRIVER

MENS FW

MENS HYBRID

Shaft Name M60 LightShaft Flex SL R S SL R Loft Angle (°) 10.5 12Lie Angle (°) 59.5 (STD)Face Angle (°) 0Volume (ml) 460Head Weight (g) 199Shaft Weight (g) 58 60 65 58 60Torque (°) 5 4.8 5 5Club Length (inch) 45.75Swing Weight (g) D5Club Weight (g) 313.5 315.5 320.5 313.5 315.5

No. #3 #5 Shaft M60 LightShaft Flex SL R S SL R S Loft Angle (°) 15 18Lie Angle (°) 57.0 (STD) 57.5 (STD) Face Angle (°) 0Volume (ml) 217 213Head Weight (g) 213 217Shaft Weight (g) 52 54 57 51.0 53.0 56.0Torque (°) 5.3 5.1 4.8 5.3 5.1 4.8Club Length (inch) 43.25 42.75Swing Weight D2Club Weight (g) 321 323 326 324 326 329

No. #3 #4 #5 Shaft M60 Light

MENS DRIVER

MENS FW

MENS HYBRID

MENS IRONS

Shaft Name M60 LightShaft Flex SL R S SL R Loft Angle (°) 10.5 12Lie Angle (°) 59.5 (STD)Face Angle (°) 0Volume (ml) 460Head Weight (g) 199Shaft Weight (g) 58 60 65 58 60Torque (°) 5 4.8 5 5Club Length (inch) 45.75Swing Weight (g) D5Club Weight (g) 313.5 315.5 320.5 313.5 315.5

No. #3 #5 Shaft M60 LightShaft Flex SL R S SL R S Loft Angle (°) 15 18Lie Angle (°) 57.0 (STD) 57.5 (STD) Face Angle (°) 0Volume (ml) 217 213Head Weight (g) 213 217Shaft Weight (g) 52 54 57 51.0 53.0 56.0Torque (°) 5.3 5.1 4.8 5.3 5.1 4.8Club Length (inch) 43.25 42.75Swing Weight D2Club Weight (g) 321 323 326 324 326 329

No. #3 #4 #5 Shaft M60 LightShaft Flex SL R S SL R S SL R SLoft Angle (°) 20 23 26Lie Angle (°) 58.0 (STD) 58.5 (STD) 59.0 (STD) Face Angle (°) 0.5 Open (STD) Volume (ml) 108 107 106Head Weight (g) 239 244 250Shaft Weight (g) 61 62 65 60 61 64 59 60 63Torque (°) 4.0Club Length (inch) 40 39.5 39Swing Weight D1.5Club Weight (g) 356 357 360 360 361 364 365 366 369

Left Hand also available

No. 4 5 6 7 8 9 PW AW SWShaft Options Graphite: M60 Light Steel: FST-115

The larger, shallower club head maximises forgiveness.

The lightweight M60 shaft provides additional energy transfer and increased acceleration.

The lightweight M60 shaft provides additional energy transfer and increased acceleration.

Octaforce technology in the crown and face gives the club a lower and deeper centre of gravity and a high-repulsion face for a higher launch, faster ball speeds and effortless power. Weight is reduced by separating 0.8mm thin sections of the crown with 0.5mm thin octagonal spaces.

Octaforce technology in the crown and face gives the club a lower and deeper centre of gravity and a high-repulsion face for a higher launch, faster ball speeds and effortless power. Weight is reduced by separating 0.8mm thin sections of the crown with 0.5mm thin octagonal spaces.

The larger, shallower club head maximises forgiveness.

EZONE ELITE / FAIRWAY WOOD24 EZONE ELITE / HYBRID 25

Page 26: The spirit of ‘Made in Japan’€¦ · 40 REXIS XELA SHAFTS 41 REXIS KAIZA SHAFTS GOLF GEAR 43 BAGS / ACCESSORIES. The spirit of ‘Made in Japan’ craftsmanship and technology

3.2mm 2.7mm

Deep cavity for enlarged sweet spotDeeper cavity behind the club face enlarges the sweet spot.

3.2mm 2.7mm

Octaforce technology in the faceApplied to the rear area of the face providing a lower centre of gravity and more repulsion.

Toe-Heel weight flowMaintaining the same centre of gravity length, weight is distributed more on the toe-side for shorter irons. This promotes a draw on the longer irons and reduces pulls on the shorter irons.

EZONE Elite IronThe deeper cavity and high flex face create an enlarged sweet spot for maximum distance and forgiveness.

EZONE Elite PutterThe Anti-Slip Groove Face provides responsive feel, improved consistency and a truer roll.

MENS FW

MENS HYBRID

MENS IRONS

MENS PUTTERS

Shaft Flex SL R S SL R Loft Angle (°) 10.5 12Lie Angle (°) 59.5 (STD)Face Angle (°) 0Volume (ml) 460Head Weight (g) 199Shaft Weight (g) 58 60 65 58 60Torque (°) 5 4.8 5 5Club Length (inch) 45.75Swing Weight (g) D5Club Weight (g) 313.5 315.5 320.5 313.5 315.5

No. #3 #5 Shaft M60 LightShaft Flex SL R S SL R S Loft Angle (°) 15 18Lie Angle (°) 57.0 (STD) 57.5 (STD) Face Angle (°) 0Volume (ml) 217 213Head Weight (g) 213 217Shaft Weight (g) 52 54 57 51.0 53.0 56.0Torque (°) 5.3 5.1 4.8 5.3 5.1 4.8Club Length (inch) 43.25 42.75Swing Weight D2Club Weight (g) 321 323 326 324 326 329

No. #3 #4 #5 Shaft M60 LightShaft Flex SL R S SL R S SL R SLoft Angle (°) 20 23 26Lie Angle (°) 58.0 (STD) 58.5 (STD) 59.0 (STD) Face Angle (°) 0.5 Open (STD) Volume (ml) 106 107 108Head Weight (g) 239 244 250Shaft Weight (g) 61 62 65 60 61 64 59 60 63Torque (°) 4.0Club Length (inch) 40 39.5 39Swing Weight D1.5Club Weight (g) 356 357 360 360 361 364 365 366 369

Left Hand also available

No. 4 5 6 7 8 9 PW AW SWShaft Option Graphite: M60 Light Steel: FST-115Loft (°) 22 24 26 29 33 38 43 49 56Lie (°) 61.5 62 62.5 63 63.5 64 64.5 64.5 64.5Face Progression (mm) 1 1 1.5 1.5 2 2 2.5 3 5Head Weight (g) 252 257 263 270 276 284 292 300 302Shaft Length (inch) Graphite 38.75 38.25 37.75 37.25 36.75 36.25 35.75 35.25 35.25 Steel 38.75 38.25 37.75 37.25 36.75 36.25 35.75 35.25 35.25Swing Weight Graphite D 0.5 (Steel D 2.5) D 2.5 (Steel D 3.5)

Left Hand also available

Shaft Options Graphite: M60 Light Steel: FST-115Shaft Flex SL R S R STotal Weight (g) 383 385 388 420 420Shaft Weight (g) 57 59 62 94 94Torque (°) 38 3.8 3.8

Based on #7

MENS IRONS

M60 Light shaft for additional energy transfer and ball strike acceleration.

MENS HYBRID

MENS IRONS

MENS PUTTERS

Shaft M60 LightShaft Flex SL R S SL R S Loft Angle (°) 15 18Lie Angle (°) 57.0 (STD) 57.5 (STD) Face Angle (°) 0Volume (ml) 217 213Head Weight (g) 213 217Shaft Weight (g) 52 54 57 51.0 53.0 56.0Torque (°) 5.3 5.1 4.8 5.3 5.1 4.8Club Length (inch) 43.25 42.75Swing Weight D2Club Weight (g) 321 323 326 324 326 329

No. #3 #4 #5 Shaft M60 LightShaft Flex SL R S SL R S SL R SLoft Angle (°) 20 23 26Lie Angle (°) 58.0 (STD) 58.5 (STD) 59.0 (STD) Face Angle (°) 0.5 Open (STD) Volume (ml) 106 107 108Head Weight (g) 239 244 250Shaft Weight (g) 61 62 65 60 61 64 59 60 63Torque (°) 4.0Club Length (inch) 40 39.5 39Swing Weight D1.5Club Weight (g) 356 357 360 360 361 364 365 366 369

Left Hand also available

No. 4 5 6 7 8 9 PW AW SWShaft Options Graphite: M60 Light Steel: FST-115Loft (°) 22 24 26 29 33 38 43 49 56Lie (°) 61.5 62 62.5 63 63.5 64 64.5 64.5 64.5Face Progression (mm) 1 1 1.5 1.5 2 2 2.5 3 5Head Weight (g) 252 257 263 270 276 284 292 300 302Shaft Length (inch) Graphite 38.75 38.25 37.75 37.25 36.75 36.25 35.75 35.25 35.25Steel 38.75 38.25 37.75 37.25 36.75 36.25 35.75 35.25 35.25Swing Weight Graphite D 0.5 (Steel D 2.5) D 2.5 (Steel D 3.5)

Left Hand also available

Shaft Options Graphite: M60 Light Steel: FST-115Shaft Flex SL R S R STotal Weight (g) 383 385 388 420 420Shaft Weight (g) 57 59 62 94 94Torque (°) 38 3.8 3.8

Based on #7

Loft (°) Lie (°) Head Weight (g) Length (inch)4 72 355 34

MENS IRONS

MENS FW

MENS HYBRID

MENS IRONS

MENS PUTTERS

Shaft Weight (g) 58 60 65 58 60Torque (°) 5 4.8 5 5Club Length (inch) 45.75Swing Weight (g) D5Club Weight (g) 313.5 315.5 320.5 313.5 315.5

No. #3 #5 Shaft M60 LightShaft Flex SL R S SL R S Loft Angle (°) 15 18Lie Angle (°) 57.0 (STD) 57.5 (STD) Face Angle (°) 0Volume (ml) 217 213Head Weight (g) 213 217Shaft Weight (g) 52 54 57 51.0 53.0 56.0Torque (°) 5.3 5.1 4.8 5.3 5.1 4.8Club Length (inch) 43.25 42.75Swing Weight D2Club Weight (g) 321 323 326 324 326 329

No. #3 #4 #5 Shaft M60 LightShaft Flex SL R S SL R S SL R SLoft Angle (°) 20 23 26Lie Angle (°) 58.0 (STD) 58.5 (STD) 59.0 (STD) Face Angle (°) 0.5 Open (STD) Volume (ml) 106 107 108Head Weight (g) 239 244 250Shaft Weight (g) 61 62 65 60 61 64 59 60 63Torque (°) 4.0Club Length (inch) 40 39.5 39Swing Weight D1.5Club Weight (g) 356 357 360 360 361 364 365 366 369

Left Hand also available

No. 4 5 6 7 8 9 PW AW SWShaft Options Graphite: M60 Light Steel: FST-115Loft (°) 22 24 26 29 33 38 43 49 56Lie (°) 61.5 62 62.5 63 63.5 64 64.5 64.5 64.5Face Progression (mm) 1 1 1.5 1.5 2 2 2.5 3 5Head Weight (g) 252 257 263 270 276 284 292 300 302Shaft Length (inch) Graphite 38.75 38.25 37.75 37.25 36.75 36.25 35.75 35.25 35.25Steel 38.75 38.25 37.75 37.25 36.75 36.25 35.75 35.25 35.25Swing Weight Graphite D 0.5 (Steel D 2.5) D 2.5 (Steel D 3.5)

Left Hand also available

Shaft Option Graphite: M60 Light Steel: FST-115Shaft Flex SL R S R STotal Weight (g) 383 385 388 420 420Shaft Weight (g) 57 59 62 94 94Torque (°) 38 3.8 3.8

Based on #7

Loft Lie Head Weight Length4° 72° 355g 34”

MENS IRONS

Anti-Slip Groove Face provides responsive feel, improved consistency and straighter roll.

Blade style head design with slant-neck hosel delivers straighter roll even on off-centre putts.

Black PVD finish provides an ultra-premium look and feel while reducing glare.

EZONE ELITE / IRON26 EZONE ELITE / PUTTER 27

Page 27: The spirit of ‘Made in Japan’€¦ · 40 REXIS XELA SHAFTS 41 REXIS KAIZA SHAFTS GOLF GEAR 43 BAGS / ACCESSORIES. The spirit of ‘Made in Japan’ craftsmanship and technology

3.2mm 2.7mm

Deep cavity for enlarged sweet spotDeeper cavity behind the club face enlarges the sweet spot.

3.2mm 2.7mm

Octaforce technology in the faceApplied to the rear area of the face providing a lower centre of gravity and more repulsion.

Toe-Heel weight flowMaintaining the same centre of gravity length, weight is distributed more on the toe-side for shorter irons. This promotes a draw on the longer irons and reduces pulls on the shorter irons.

EZONE Elite IronThe deeper cavity and high flex face create an enlarged sweet spot for maximum distance and forgiveness.

EZONE Elite PutterThe Anti-Slip Groove Face provides responsive feel, improved consistency and a truer roll.

MENS FW

MENS HYBRID

MENS IRONS

MENS PUTTERS

Shaft Flex SL R S SL R Loft Angle (°) 10.5 12Lie Angle (°) 59.5 (STD)Face Angle (°) 0Volume (ml) 460Head Weight (g) 199Shaft Weight (g) 58 60 65 58 60Torque (°) 5 4.8 5 5Club Length (inch) 45.75Swing Weight (g) D5Club Weight (g) 313.5 315.5 320.5 313.5 315.5

No. #3 #5 Shaft M60 LightShaft Flex SL R S SL R S Loft Angle (°) 15 18Lie Angle (°) 57.0 (STD) 57.5 (STD) Face Angle (°) 0Volume (ml) 217 213Head Weight (g) 213 217Shaft Weight (g) 52 54 57 51.0 53.0 56.0Torque (°) 5.3 5.1 4.8 5.3 5.1 4.8Club Length (inch) 43.25 42.75Swing Weight D2Club Weight (g) 321 323 326 324 326 329

No. #3 #4 #5 Shaft M60 LightShaft Flex SL R S SL R S SL R SLoft Angle (°) 20 23 26Lie Angle (°) 58.0 (STD) 58.5 (STD) 59.0 (STD) Face Angle (°) 0.5 Open (STD) Volume (ml) 106 107 108Head Weight (g) 239 244 250Shaft Weight (g) 61 62 65 60 61 64 59 60 63Torque (°) 4.0Club Length (inch) 40 39.5 39Swing Weight D1.5Club Weight (g) 356 357 360 360 361 364 365 366 369

Left Hand also available

No. 4 5 6 7 8 9 PW AW SWShaft Option Graphite: M60 Light Steel: FST-115Loft (°) 22 24 26 29 33 38 43 49 56Lie (°) 61.5 62 62.5 63 63.5 64 64.5 64.5 64.5Face Progression (mm) 1 1 1.5 1.5 2 2 2.5 3 5Head Weight (g) 252 257 263 270 276 284 292 300 302Shaft Length (inch) Graphite 38.75 38.25 37.75 37.25 36.75 36.25 35.75 35.25 35.25 Steel 38.75 38.25 37.75 37.25 36.75 36.25 35.75 35.25 35.25Swing Weight Graphite D 0.5 (Steel D 2.5) D 2.5 (Steel D 3.5)

Left Hand also available

Shaft Options Graphite: M60 Light Steel: FST-115Shaft Flex SL R S R STotal Weight (g) 383 385 388 420 420Shaft Weight (g) 57 59 62 94 94Torque (°) 38 3.8 3.8

Based on #7

MENS IRONS

M60 Light shaft for additional energy transfer and ball strike acceleration.

MENS HYBRID

MENS IRONS

MENS PUTTERS

Shaft M60 LightShaft Flex SL R S SL R S Loft Angle (°) 15 18Lie Angle (°) 57.0 (STD) 57.5 (STD) Face Angle (°) 0Volume (ml) 217 213Head Weight (g) 213 217Shaft Weight (g) 52 54 57 51.0 53.0 56.0Torque (°) 5.3 5.1 4.8 5.3 5.1 4.8Club Length (inch) 43.25 42.75Swing Weight D2Club Weight (g) 321 323 326 324 326 329

No. #3 #4 #5 Shaft M60 LightShaft Flex SL R S SL R S SL R SLoft Angle (°) 20 23 26Lie Angle (°) 58.0 (STD) 58.5 (STD) 59.0 (STD) Face Angle (°) 0.5 Open (STD) Volume (ml) 106 107 108Head Weight (g) 239 244 250Shaft Weight (g) 61 62 65 60 61 64 59 60 63Torque (°) 4.0Club Length (inch) 40 39.5 39Swing Weight D1.5Club Weight (g) 356 357 360 360 361 364 365 366 369

Left Hand also available

No. 4 5 6 7 8 9 PW AW SWShaft Options Graphite: M60 Light Steel: FST-115Loft (°) 22 24 26 29 33 38 43 49 56Lie (°) 61.5 62 62.5 63 63.5 64 64.5 64.5 64.5Face Progression (mm) 1 1 1.5 1.5 2 2 2.5 3 5Head Weight (g) 252 257 263 270 276 284 292 300 302Shaft Length (inch) Graphite 38.75 38.25 37.75 37.25 36.75 36.25 35.75 35.25 35.25Steel 38.75 38.25 37.75 37.25 36.75 36.25 35.75 35.25 35.25Swing Weight Graphite D 0.5 (Steel D 2.5) D 2.5 (Steel D 3.5)

Left Hand also available

Shaft Options Graphite: M60 Light Steel: FST-115Shaft Flex SL R S R STotal Weight (g) 383 385 388 420 420Shaft Weight (g) 57 59 62 94 94Torque (°) 38 3.8 3.8

Based on #7

Loft (°) Lie (°) Head Weight (g) Length (inch)4 72 355 34

MENS IRONS

MENS FW

MENS HYBRID

MENS IRONS

MENS PUTTERS

Shaft Weight (g) 58 60 65 58 60Torque (°) 5 4.8 5 5Club Length (inch) 45.75Swing Weight (g) D5Club Weight (g) 313.5 315.5 320.5 313.5 315.5

No. #3 #5 Shaft M60 LightShaft Flex SL R S SL R S Loft Angle (°) 15 18Lie Angle (°) 57.0 (STD) 57.5 (STD) Face Angle (°) 0Volume (ml) 217 213Head Weight (g) 213 217Shaft Weight (g) 52 54 57 51.0 53.0 56.0Torque (°) 5.3 5.1 4.8 5.3 5.1 4.8Club Length (inch) 43.25 42.75Swing Weight D2Club Weight (g) 321 323 326 324 326 329

No. #3 #4 #5 Shaft M60 LightShaft Flex SL R S SL R S SL R SLoft Angle (°) 20 23 26Lie Angle (°) 58.0 (STD) 58.5 (STD) 59.0 (STD) Face Angle (°) 0.5 Open (STD) Volume (ml) 106 107 108Head Weight (g) 239 244 250Shaft Weight (g) 61 62 65 60 61 64 59 60 63Torque (°) 4.0Club Length (inch) 40 39.5 39Swing Weight D1.5Club Weight (g) 356 357 360 360 361 364 365 366 369

Left Hand also available

No. 4 5 6 7 8 9 PW AW SWShaft Options Graphite: M60 Light Steel: FST-115Loft (°) 22 24 26 29 33 38 43 49 56Lie (°) 61.5 62 62.5 63 63.5 64 64.5 64.5 64.5Face Progression (mm) 1 1 1.5 1.5 2 2 2.5 3 5Head Weight (g) 252 257 263 270 276 284 292 300 302Shaft Length (inch) Graphite 38.75 38.25 37.75 37.25 36.75 36.25 35.75 35.25 35.25Steel 38.75 38.25 37.75 37.25 36.75 36.25 35.75 35.25 35.25Swing Weight Graphite D 0.5 (Steel D 2.5) D 2.5 (Steel D 3.5)

Left Hand also available

Shaft Option Graphite: M60 Light Steel: FST-115Shaft Flex SL R S R STotal Weight (g) 383 385 388 420 420Shaft Weight (g) 57 59 62 94 94Torque (°) 38 3.8 3.8

Based on #7

Loft Lie Head Weight Length4° 72° 355g 34”

MENS IRONS

Anti-Slip Groove Face provides responsive feel, improved consistency and straighter roll.

Blade style head design with slant-neck hosel delivers straighter roll even on off-centre putts.

Black PVD finish provides an ultra-premium look and feel while reducing glare.

EZONE ELITE / IRON26 EZONE ELITE / PUTTER 27

Page 28: The spirit of ‘Made in Japan’€¦ · 40 REXIS XELA SHAFTS 41 REXIS KAIZA SHAFTS GOLF GEAR 43 BAGS / ACCESSORIES. The spirit of ‘Made in Japan’ craftsmanship and technology

EZONE Putters TP-GR1/TP-BR1Sink 90%* of those tricky 1-metre putts. TP-GR1 TP-BR1

5.61°

TP-GR1 Back TP-GR1 Toe TP-BR1 Toe

Shaft

Length (inch)

Loft (°) 

Lie (°) 

Total Weight (g)

Head Weight (g) 

34

543

36

551

Steel

3

68

350

Head Construction: SUS630 Casting / Made in Japan

*This figure is based on a scientific theory and the percentage is not guaranteed

Head coverOriginal Grip

The centre of gravity is weighted towards the toe providing a sweet area in the face centre which improves accuracy.

The centre of gravity is located towards the back of the head providing a straight stable stroke.

TRIPRINCIPLE HybridHit those last 180 yards with the swing of an 8 Iron.

Head Construction, Body: SUS630 Stainless Steel Precision Casting, Face: Rolled 455 Steel Plate Maraging / Made in Japan

Tour Velvet (with Yonex logo) Head cover

3S Scoreline Slanted Spin StabilizerOn either wet or dry grass, the 3S scorelines (diagonal) enable a clean ball strike for consistent spin and distance control.

Shaft

No.

Shaft Flex

Loft Angle (°)

Lie Angle (°)

Face Angle (°)

Volume (ml)

Shaft Weight (g)

Torque (°)

Club Length (inch)

Club Weight (g)

Swing Weight

WFS 300-U (Mid)

4

 

23.5

60.5

0.5 Open

98

40.25

2

R

48

4.9

332

S

52

4.7

336

R

52

4.4

349

3

 

20

60

102

41.25

S

56

4.2

353

R

58

3.7

360

S

62

3.5

364

5

 

27

61

93

39.5

Head data #3

Focused on ForgivenessThis club design features a deep cut in the middle of the crown to produce a low centre of gravity. In addition the club's centre of gravity axis has been positioned at the centre of the face for the perfect launch.

Reverse Weight Flow DesignThe longer shaft becomes lighter and easier to swing which helps to increase head speeds and reduce the spin rate for a perfect launch.

Centre of gravity depth: 30.4mm / Centre of gravity distance: 36.1mm / Centre of gravity height: 13.1mm / Face height: 31.0mm

EZONE TRIPRINCIPLE / PUTTER28 TRIPRINCIPLE / HYBRID 29

Page 29: The spirit of ‘Made in Japan’€¦ · 40 REXIS XELA SHAFTS 41 REXIS KAIZA SHAFTS GOLF GEAR 43 BAGS / ACCESSORIES. The spirit of ‘Made in Japan’ craftsmanship and technology

EZONE Putters TP-GR1/TP-BR1Sink 90%* of those tricky 1-metre putts. TP-GR1 TP-BR1

5.61°

TP-GR1 Back TP-GR1 Toe TP-BR1 Toe

Shaft

Length (inch)

Loft (°) 

Lie (°) 

Total Weight (g)

Head Weight (g) 

34

543

36

551

Steel

3

68

350

Head Construction: SUS630 Casting / Made in Japan

*This figure is based on a scientific theory and the percentage is not guaranteed

Head coverOriginal Grip

The centre of gravity is weighted towards the toe providing a sweet area in the face centre which improves accuracy.

The centre of gravity is located towards the back of the head providing a straight stable stroke.

TRIPRINCIPLE HybridHit those last 180 yards with the swing of an 8 Iron.

Head Construction, Body: SUS630 Stainless Steel Precision Casting, Face: Rolled 455 Steel Plate Maraging / Made in Japan

Tour Velvet (with Yonex logo) Head cover

3S Scoreline Slanted Spin StabilizerOn either wet or dry grass, the 3S scorelines (diagonal) enable a clean ball strike for consistent spin and distance control.

Shaft

No.

Shaft Flex

Loft Angle (°)

Lie Angle (°)

Face Angle (°)

Volume (ml)

Shaft Weight (g)

Torque (°)

Club Length (inch)

Club Weight (g)

Swing Weight

WFS 300-U (Mid)

4

 

23.5

60.5

0.5 Open

98

40.25

2

R

48

4.9

332

S

52

4.7

336

R

52

4.4

349

3

 

20

60

102

41.25

S

56

4.2

353

R

58

3.7

360

S

62

3.5

364

5

 

27

61

93

39.5

Head data #3

Focused on ForgivenessThis club design features a deep cut in the middle of the crown to produce a low centre of gravity. In addition the club's centre of gravity axis has been positioned at the centre of the face for the perfect launch.

Reverse Weight Flow DesignThe longer shaft becomes lighter and easier to swing which helps to increase head speeds and reduce the spin rate for a perfect launch.

Centre of gravity depth: 30.4mm / Centre of gravity distance: 36.1mm / Centre of gravity height: 13.1mm / Face height: 31.0mm

EZONE TRIPRINCIPLE / PUTTER28 TRIPRINCIPLE / HYBRID 29

Page 30: The spirit of ‘Made in Japan’€¦ · 40 REXIS XELA SHAFTS 41 REXIS KAIZA SHAFTS GOLF GEAR 43 BAGS / ACCESSORIES. The spirit of ‘Made in Japan’ craftsmanship and technology

XELA for Royal (NANOMETRIC DR Carbon Graphite) Original Tungsten Balance Grip

Female golfers can now achieve outstanding driving distances due to the new evolved Dual Tungsten Power System.

Shaft

Shaft Flex

Loft Angle (°)

Lie Angle (°)

Face Angle (°)

Volume (ml)

Shaft Weight (g)

Torque (°)

Club Length (inch)

Club Weight (g)

Swing Weight

XELA for Royal (Low)

58.5

0

460

R

11.5

38

6

45.25

277

C3

Head Construction, Body: 6Al-4V Titanium Precision Casting, Face: Rolled SP-700HM Titanium Plate, Crown: TOUGH G-FIBER Reinforced High Intensity Graphite / Made in Japan

Royal EZONE Driver

Centre of gravity depth: 35.5mm / Centre of gravitydistance: 38.0mm / Centre of gravity height: 26.2mm / Face height: 51.0mm

TOUGH G-FIBERSurface area

Head cover Torque wrench

QUICK ADJUSTSYSTEM

Our biggest ever sweet spot. The Graphite Crown makes up 45% of the head producing a wider sweet area.

Drive Further.Our flagship driver to help all female golfers produce those all-important extra yards.

The Graphite Crown construction is produced using a new manufacturing technique 'Vacuum internal pressure molding' and a new material 'TOUGH G-FIBER'.

Evolved Dual TungstenPower System

A new material TOUGH G-FIBER is composed of Graphite nanotubes and glass fibre, and has about 3 times the flexibility of Graphite.

A powerful Graphite Crown that is unique to Yonex is created by utilising a new vacuum internal pressure molding production method with the new TOUGH G-FIBER material. The added power and flex in the head assists female golfer's swings.

Tungsten is used in the head and grip. In addition, using nanometric DR makes this shaft light, strong and powerful. As a result, swings are easier without feeling the true length of the shaft.

TOUGH G-FIBER Graphite Crown combined headThe vacuum pressure molded Graphite Crown is thinner yet stronger. Additionally, a new TOUGH G-FIBER composed of Graphite nanotubes and glass fibre, about 3 times the flexibility of Graphite, is added. This creates a high flex Graphite Crown with enhanced repulsion power, producing greater distances when compared to other hot drivers.

ROYAL EZONE WOMEN / TECHNOLOGY30 ROYAL EZONE WOMEN / DRIVER 31

Page 31: The spirit of ‘Made in Japan’€¦ · 40 REXIS XELA SHAFTS 41 REXIS KAIZA SHAFTS GOLF GEAR 43 BAGS / ACCESSORIES. The spirit of ‘Made in Japan’ craftsmanship and technology

XELA for Royal (NANOMETRIC DR Carbon Graphite) Original Tungsten Balance Grip

Female golfers can now achieve outstanding driving distances due to the new evolved Dual Tungsten Power System.

Shaft

Shaft Flex

Loft Angle (°)

Lie Angle (°)

Face Angle (°)

Volume (ml)

Shaft Weight (g)

Torque (°)

Club Length (inch)

Club Weight (g)

Swing Weight

XELA for Royal (Low)

58.5

0

460

R

11.5

38

6

45.25

277

C3

Head Construction, Body: 6Al-4V Titanium Precision Casting, Face: Rolled SP-700HM Titanium Plate, Crown: TOUGH G-FIBER Reinforced High Intensity Graphite / Made in Japan

Royal EZONE Driver

Centre of gravity depth: 35.5mm / Centre of gravitydistance: 38.0mm / Centre of gravity height: 26.2mm / Face height: 51.0mm

TOUGH G-FIBERSurface area

Head cover Torque wrench

QUICK ADJUSTSYSTEM

Our biggest ever sweet spot. The Graphite Crown makes up 45% of the head producing a wider sweet area.

Drive Further.Our flagship driver to help all female golfers produce those all-important extra yards.

The Graphite Crown construction is produced using a new manufacturing technique 'Vacuum internal pressure molding' and a new material 'TOUGH G-FIBER'.

Evolved Dual TungstenPower System

A new material TOUGH G-FIBER is composed of Graphite nanotubes and glass fibre, and has about 3 times the flexibility of Graphite.

A powerful Graphite Crown that is unique to Yonex is created by utilising a new vacuum internal pressure molding production method with the new TOUGH G-FIBER material. The added power and flex in the head assists female golfer's swings.

Tungsten is used in the head and grip. In addition, using nanometric DR makes this shaft light, strong and powerful. As a result, swings are easier without feeling the true length of the shaft.

TOUGH G-FIBER Graphite Crown combined headThe vacuum pressure molded Graphite Crown is thinner yet stronger. Additionally, a new TOUGH G-FIBER composed of Graphite nanotubes and glass fibre, about 3 times the flexibility of Graphite, is added. This creates a high flex Graphite Crown with enhanced repulsion power, producing greater distances when compared to other hot drivers.

ROYAL EZONE WOMEN / TECHNOLOGY30 ROYAL EZONE WOMEN / DRIVER 31

Page 32: The spirit of ‘Made in Japan’€¦ · 40 REXIS XELA SHAFTS 41 REXIS KAIZA SHAFTS GOLF GEAR 43 BAGS / ACCESSORIES. The spirit of ‘Made in Japan’ craftsmanship and technology

XELA for Royal (NANOMETRIC DR Carbon Graphite)

Head Construction, Body: 6Al-4V Titanium Precision Casting, Face: Rolled SP-700HM Titanium Plate, Crown: TOUGH G-FIBER Reinforced High Intensity Graphite / Made in Japan

Shaft

No.

Shaft Flex

Loft Angle (°)

Lie Angle (°)

Face Angle (°)

Volume (ml)

Shaft Weight (g)

Torque (°)

Club Length (inch)

Club Weight (g)

Swing Weight

XELA for Royal (Low)

0

R

37

6

42.25

296

C5

3

15

58.5

200

R

36

6

40.75

308

C5

4

18

59

168

R

36

5.2

39.25

321

C5

5

21

59.5

150

R

35

5.2

37.75

335

C5

6

24

60

135

Original Tungsten Balance Grip Head cover

These 4 Fairways evenly fill the distance gaps between Driver and 7 Iron. (For club length R)

The flat face gives easier control.

The low 12.5mm centre of gravity makes it easy to get the ball airborne.

3W42.25 inch

4W40.75 inch

5W39.25 inch

6W37.75 inch

The maximum legal face repulsion allows female golfers to hit effortless shots.Royal EZONE Hybrid Fairway

Centre of gravity depth: 38.1mm / Centre of gravitydistance: 36.9mm / Centre of gravity height: 12.5mm / Face height: 36.0mm

Strike the ball with increased power and superior feel from the Graphite insert.Royal EZONE Iron

XELA for Royal (NANOMETRIC DR Carbon Graphite)

No.

Shaft

Loft Angle (°)

Lie Angle (°)

Face Progression (°)

Bounce (°)�

Length (inch)�

Swing Weight

Shaft

Shaft Flex

Total Weight (g)

Shaft Weight (g)

Torque (°)

Head Construction, #5-Pw: AM Maraging Steel Precision Casting + Tungsten + Carbon Plate, #AW-SW: SUS431 Stainless Steel Precision Casting + Carbon Plate / Made in Japan

6

25

61.0

37.50

1.5

0

C4

7

27

61.5

37.00

8

30

62.0

2.0

1

36.50

PW

39

63.0

3.0

3

35.5

AW

44

63.5

3.5

4

35.25

AS

50

63.5

4.0

6

35.0

C5

SW

56

64.0

5.0

8

34.75

C6

9

34

62.5

2.5

2

36.00

90g of Tungsten placed low and deep into the sole of the club Thin 1.8mm sole

Thin 2.0mm top edge

Ultra-resilientAM355 stainlesssteel head providessuperior power

Thin 2.1mm face

Original Tungsten Balance Grip

The ultra-thin blade, face and sole construction deliver maximum distance enhancing power, whilst the Graphite cavity insert ensures enhanced feel.

The perfect fusion of power and feel

XELA for Royal (Low)�

XELA for Royal

R

345

34

5.1

ROYAL EZONE WOMEN / HYBRID FAIRWAY32 ROYAL EZONE WOMEN / IRON 33

Page 33: The spirit of ‘Made in Japan’€¦ · 40 REXIS XELA SHAFTS 41 REXIS KAIZA SHAFTS GOLF GEAR 43 BAGS / ACCESSORIES. The spirit of ‘Made in Japan’ craftsmanship and technology

XELA for Royal (NANOMETRIC DR Carbon Graphite)

Head Construction, Body: 6Al-4V Titanium Precision Casting, Face: Rolled SP-700HM Titanium Plate, Crown: TOUGH G-FIBER Reinforced High Intensity Graphite / Made in Japan

Shaft

No.

Shaft Flex

Loft Angle (°)

Lie Angle (°)

Face Angle (°)

Volume (ml)

Shaft Weight (g)

Torque (°)

Club Length (inch)

Club Weight (g)

Swing Weight

XELA for Royal (Low)

0

R

37

6

42.25

296

C5

3

15

58.5

200

R

36

6

40.75

308

C5

4

18

59

168

R

36

5.2

39.25

321

C5

5

21

59.5

150

R

35

5.2

37.75

335

C5

6

24

60

135

Original Tungsten Balance Grip Head cover

These 4 Fairways evenly fill the distance gaps between Driver and 7 Iron. (For club length R)

The flat face gives easier control.

The low 12.5mm centre of gravity makes it easy to get the ball airborne.

3W42.25 inch

4W40.75 inch

5W39.25 inch

6W37.75 inch

The maximum legal face repulsion allows female golfers to hit effortless shots.Royal EZONE Hybrid Fairway

Centre of gravity depth: 38.1mm / Centre of gravitydistance: 36.9mm / Centre of gravity height: 12.5mm / Face height: 36.0mm

Strike the ball with increased power and superior feel from the Graphite insert.Royal EZONE Iron

XELA for Royal (NANOMETRIC DR Carbon Graphite)

No.

Shaft

Loft Angle (°)

Lie Angle (°)

Face Progression (°)

Bounce (°)�

Length (inch)�

Swing Weight

Shaft

Shaft Flex

Total Weight (g)

Shaft Weight (g)

Torque (°)

Head Construction, #5-Pw: AM Maraging Steel Precision Casting + Tungsten + Carbon Plate, #AW-SW: SUS431 Stainless Steel Precision Casting + Carbon Plate / Made in Japan

6

25

61.0

37.50

1.5

0

C4

7

27

61.5

37.00

8

30

62.0

2.0

1

36.50

PW

39

63.0

3.0

3

35.5

AW

44

63.5

3.5

4

35.25

AS

50

63.5

4.0

6

35.0

C5

SW

56

64.0

5.0

8

34.75

C6

9

34

62.5

2.5

2

36.00

90g of Tungsten placed low and deep into the sole of the club Thin 1.8mm sole

Thin 2.0mm top edge

Ultra-resilientAM355 stainlesssteel head providessuperior power

Thin 2.1mm face

Original Tungsten Balance Grip

The ultra-thin blade, face and sole construction deliver maximum distance enhancing power, whilst the Graphite cavity insert ensures enhanced feel.

The perfect fusion of power and feel

XELA for Royal (Low)�

XELA for Royal

R

345

34

5.1

ROYAL EZONE WOMEN / HYBRID FAIRWAY32 ROYAL EZONE WOMEN / IRON 33

Page 34: The spirit of ‘Made in Japan’€¦ · 40 REXIS XELA SHAFTS 41 REXIS KAIZA SHAFTS GOLF GEAR 43 BAGS / ACCESSORIES. The spirit of ‘Made in Japan’ craftsmanship and technology

EZONE Elite DriverThe Octaforce technology in the crown and face creates a super forgiving Driver for all levels of golfer.

Specifically designed for the female golfer, the EZONE ELITE range combines cutting-edge technology, quality and elegance for unparalleled performance with maximum forgiveness.

Octaforce technology in the club face and crown provides a lower and deeper centre of gravity to give you more repulsion, optimal spin and a higher more forgiving launch.

The new EZONE ELITE is the latest in high quality performance from Yonex.

The best by far

The more forgiving club head gives players a bigger sweet spot to generate effortless distance.

The L50 shaft is lighter for additional energy transfer and increased acceleration.

Octaforce technology in the crown and face gives the club a lower and deeper centre of gravity and a high-repulsion face for a higher launch, faster ball speeds and effortless power. Weight is reduced by separating 0.8mm thin sections of the crown with 0.5mm thin octagonal spaces.

EZONE ELITE WOMEN / TECHNOLOGY34 EZONE ELITE WOMEN / DRIVER 35

WOMENS DRIVERShaft L50 LightShaft Flex FL FLLoft Angle (°) 12 14Lie Angle (°) 60Face Angle (°) 0.5 (CL)Volume (ml) 440Head Weight (g) 193Shaft Weight (g) 52Torque (°) 5.6Club Length (inch) 44.5Swing Weight (g) C5Club Weight (g) 292

Page 35: The spirit of ‘Made in Japan’€¦ · 40 REXIS XELA SHAFTS 41 REXIS KAIZA SHAFTS GOLF GEAR 43 BAGS / ACCESSORIES. The spirit of ‘Made in Japan’ craftsmanship and technology

EZONE Elite DriverThe Octaforce technology in the crown and face creates a super forgiving Driver for all levels of golfer.

Specifically designed for the female golfer, the EZONE ELITE range combines cutting-edge technology, quality and elegance for unparalleled performance with maximum forgiveness.

Octaforce technology in the club face and crown provides a lower and deeper centre of gravity to give you more repulsion, optimal spin and a higher more forgiving launch.

The new EZONE ELITE is the latest in high quality performance from Yonex.

The best by far

The more forgiving club head gives players a bigger sweet spot to generate effortless distance.

The L50 shaft is lighter for additional energy transfer and increased acceleration.

Octaforce technology in the crown and face gives the club a lower and deeper centre of gravity and a high-repulsion face for a higher launch, faster ball speeds and effortless power. Weight is reduced by separating 0.8mm thin sections of the crown with 0.5mm thin octagonal spaces.

EZONE ELITE WOMEN / TECHNOLOGY34 EZONE ELITE WOMEN / DRIVER 35

WOMENS DRIVERShaft L50 LightShaft Flex FL FLLoft Angle (°) 12 14Lie Angle (°) 60Face Angle (°) 0.5 (CL)Volume (ml) 440Head Weight (g) 193Shaft Weight (g) 52Torque (°) 5.6Club Length (inch) 44.5Swing Weight (g) C5Club Weight (g) 292

Page 36: The spirit of ‘Made in Japan’€¦ · 40 REXIS XELA SHAFTS 41 REXIS KAIZA SHAFTS GOLF GEAR 43 BAGS / ACCESSORIES. The spirit of ‘Made in Japan’ craftsmanship and technology

EZONE Elite HybridThe lower and deeper centre of gravity ensures an effortless ball strike whatever the lie.

EZONE Elite Fairway WoodThe enlarged shallower head shape maximises forgiveness from the fairway or tee.

WOMENS DRIVER

WOMENS FW

Shaft Name L50 LightShaft Flex FL FLLoft Angle (°) 12 14Lie Angle (°) 60Face Angle (°) 0.5 (CL)Volume (ml) 440Head Weight (g) 193Shaft Weight (g) 52Torque (°) 5.6Club Length (inch) 44.5Swing Weight (g) C5Club Weight (g) 292

#3 #5 #7Shaft L50 LightShaft Flex FL FL FL Loft Angle (°) 18 21 24Lie Angle (°) 58 58.5 59Face Angle (°) 0 0 0Volume (ml) 171 167 163Head Weight (g) 210 214 219Shaft Weight (g) 54 53 52Torque (°) 5.8Club Length (inch) 42.25 41.75 41.25Swing Weight (g) C5Club Weight (g) 311 314 318

WOMENS DRIVER

WOMENS FW

WOMENS HYBRID

Shaft Name L50 LightShaft Flex FL FLLoft Angle (°) 12 14Lie Angle (°) 60Face Angle (°) 0.5 (CL)Volume (ml) 440Head Weight (g) 193Shaft Weight (g) 52Torque (°) 5.6Club Length (inch) 44.5Swing Weight (g) C5Club Weight (g) 292

#3 #5 #7Shaft Name L50 LightShaft Flex FL FL FL Loft Angle (°) 18 21 24Lie Angle (°) 58 58.5 59Face Angle (°) 0 0 0Volume (ml) 171 167 163Head Weight (g) 210 214 219Shaft Weight (g) 54 53 52Torque (°) 5.8Club Length (inch) 42.25 41.75 41.25Swing Weight (g) C5Club Weight (g) 311 314 318

#4 #5 #6 #7Shaft L50 LightShaft Flex FL FL FL FL Loft Angle (°) 23 26 29 32Lie Angle (°) 58.5 59 59.5 60Face Angle (°) 0Volume (ml) 112 111 110 109Head Weight (g) 240 246 252 258Shaft Weight (g) 54 53 52 52Torque (°) 4Club Length (inch) 38.5 38 37.5 37Swing Weight (g) C5Club Weight (g) 341 346 351 357

The larger, shallower club head maximises forgiveness.

The larger, shallower club head maximises forgiveness.

The lightweight L50 shaft provides additional energy transfer and increased acceleration.

The lightweight L50 shaft provides additional energy transfer and increased acceleration.

Octaforce technology in the crown and face gives the club a lower and deeper centre of gravity and a high-repulsion face for a higher launch, faster ball speeds and effortless power. Weight is reduced by separating 0.8mm thin sections of the crown with 0.5mm thin octagonal spaces.

Octaforce technology in the crown and face gives the club a lower and deeper centre of gravity and a high-repulsion face for a higher launch, faster ball speeds and effortless power. Weight is reduced by separating 0.8mm thin sections of the crown with 0.5mm thin octagonal spaces.

EZONE ELITE WOMEN / FAIRWAY WOOD36 EZONE ELITE WOMEN / HYBRID 37

Page 37: The spirit of ‘Made in Japan’€¦ · 40 REXIS XELA SHAFTS 41 REXIS KAIZA SHAFTS GOLF GEAR 43 BAGS / ACCESSORIES. The spirit of ‘Made in Japan’ craftsmanship and technology

EZONE Elite HybridThe lower and deeper centre of gravity ensures an effortless ball strike whatever the lie.

EZONE Elite Fairway WoodThe enlarged shallower head shape maximises forgiveness from the fairway or tee.

WOMENS DRIVER

WOMENS FW

Shaft Name L50 LightShaft Flex FL FLLoft Angle (°) 12 14Lie Angle (°) 60Face Angle (°) 0.5 (CL)Volume (ml) 440Head Weight (g) 193Shaft Weight (g) 52Torque (°) 5.6Club Length (inch) 44.5Swing Weight (g) C5Club Weight (g) 292

#3 #5 #7Shaft L50 LightShaft Flex FL FL FL Loft Angle (°) 18 21 24Lie Angle (°) 58 58.5 59Face Angle (°) 0 0 0Volume (ml) 171 167 163Head Weight (g) 210 214 219Shaft Weight (g) 54 53 52Torque (°) 5.8Club Length (inch) 42.25 41.75 41.25Swing Weight (g) C5Club Weight (g) 311 314 318

WOMENS DRIVER

WOMENS FW

WOMENS HYBRID

Shaft Name L50 LightShaft Flex FL FLLoft Angle (°) 12 14Lie Angle (°) 60Face Angle (°) 0.5 (CL)Volume (ml) 440Head Weight (g) 193Shaft Weight (g) 52Torque (°) 5.6Club Length (inch) 44.5Swing Weight (g) C5Club Weight (g) 292

#3 #5 #7Shaft Name L50 LightShaft Flex FL FL FL Loft Angle (°) 18 21 24Lie Angle (°) 58 58.5 59Face Angle (°) 0 0 0Volume (ml) 171 167 163Head Weight (g) 210 214 219Shaft Weight (g) 54 53 52Torque (°) 5.8Club Length (inch) 42.25 41.75 41.25Swing Weight (g) C5Club Weight (g) 311 314 318

#4 #5 #6 #7Shaft L50 LightShaft Flex FL FL FL FL Loft Angle (°) 23 26 29 32Lie Angle (°) 58.5 59 59.5 60Face Angle (°) 0Volume (ml) 112 111 110 109Head Weight (g) 240 246 252 258Shaft Weight (g) 54 53 52 52Torque (°) 4Club Length (inch) 38.5 38 37.5 37Swing Weight (g) C5Club Weight (g) 341 346 351 357

The larger, shallower club head maximises forgiveness.

The larger, shallower club head maximises forgiveness.

The lightweight L50 shaft provides additional energy transfer and increased acceleration.

The lightweight L50 shaft provides additional energy transfer and increased acceleration.

Octaforce technology in the crown and face gives the club a lower and deeper centre of gravity and a high-repulsion face for a higher launch, faster ball speeds and effortless power. Weight is reduced by separating 0.8mm thin sections of the crown with 0.5mm thin octagonal spaces.

Octaforce technology in the crown and face gives the club a lower and deeper centre of gravity and a high-repulsion face for a higher launch, faster ball speeds and effortless power. Weight is reduced by separating 0.8mm thin sections of the crown with 0.5mm thin octagonal spaces.

EZONE ELITE WOMEN / FAIRWAY WOOD36 EZONE ELITE WOMEN / HYBRID 37

Page 38: The spirit of ‘Made in Japan’€¦ · 40 REXIS XELA SHAFTS 41 REXIS KAIZA SHAFTS GOLF GEAR 43 BAGS / ACCESSORIES. The spirit of ‘Made in Japan’ craftsmanship and technology

3.2mm 2.7mm

Octaforce technology in the faceApplied to the rear area of the face providing a lower centre of gravity and more repulsion.

Toe-Heel weight flowMaintaining the same centre of gravity length, weight is distributed more on the toe-side for shorter irons. This promotes a draw on the longer irons and reduces pulls on the shorter irons.

EZONE Elite Iron EZONE Elite PutterThe Anti-Slip Groove Face provides responsive feel, improved consistency and a truer roll.

WOMENS DRIVER

WOMENS FW

WOMENS HYBRID

WOMENS IRONS

WOMENS IRONS

Shaft Name L50 LightShaft Flex FL FLLoft Angle (°) 12 14Lie Angle (°) 60Face Angle (°) 0.5 (CL)Volume (ml) 440Head Weight (g) 193Shaft Weight (g) 52Torque (°) 5.6Club Length (inch) 44.5Swing Weight (g) C5Club Weight (g) 292

#3 #5 #7Shaft Name L50 LightShaft Flex FL FL FL Loft Angle (°) 18 21 24Lie Angle (°) 58 58.5 59Face Angle (°) 0 0 0Volume (ml) 171 167 163Head Weight (g) 210 214 219Shaft Weight (g) 54 53 52Torque (°) 5.8Club Length (inch) 42.25 41.75 41.25Swing Weight (g) C5Club Weight (g) 311 314 318

#4 #5 #6 #7Shaft Name L50 LightShaft Flex FL FL FL FL Loft Angle (°) 23 26 29 32Lie Angle (°) 58.5 59 59.5 60Face Angle (°) 0Volume (ml) 112 111 110 109Head Weight (g) 240 246 252 258Shaft Weight (g) 54 53 52 52Torque (°) 4Club Length (inch) 38.5 38 37.5 37Swing Weight (g) C5Club Weight (g) 341 346 351 357

No. 5 6 7 8 9 PW AW SWShaft L50 LightLoft (°) 25 27 30 34 39 44 50 56Lie (°) 61.5 62 62.5 63 63.5 64 64 64Face Progression (mm) 1.5 1.5 1.5 2 2.5 3 3.5 5Head Weight (g) 256 261 268 274 282 289 300 302Shaft Length (inch) Graphite 37.25 36.75 36.25 35.75 35.25 34.75 34.25 34.25Swing Weight Graphite C5 C6 C7

Based on #7

L50 Light shaft for additional energy transfer and ball strike acceleration.

WOMENS HYBRID

WOMENS IRONS

WOMENS IRONS

WOMENS PUTTERS

#3 #5 #7Shaft Name L50 LightShaft Flex FL FL FL Loft Angle (°) 18 21 24Lie Angle (°) 58 58.5 59Face Angle (°) 0 0 0Volume (ml) 171 167 163Head Weight (g) 210 214 219Shaft Weight (g) 54 53 52Torque (°) 5.8Club Length (inch) 42.25 41.75 41.25Swing Weight (g) C5Club Weight (g) 311 314 318

#4 #5 #6 #7Shaft Name L50 LightShaft Flex FL FL FL FL Loft Angle (°) 23 26 29 32Lie Angle (°) 58.5 59 59.5 60Face Angle (°) 0Volume (ml) 112 111 110 109Head Weight (g) 240 246 252 258Shaft Weight (g) 54 53 52 52Torque (°) 4Club Length (inch) 38.5 38 37.5 37Swing Weight (g) C5Club Weight (g) 341 346 351 357

No. 5 6 7 8 9 PW AW SWShaft Options L50 LightLoft (°) 25 27 30 34 39 44 50 56Lie (°) 61.5 62 62.5 63 63.5 64 64 64Face Progression (mm) 1.5 1.5 1.5 2 2.5 3 3.5 5Head Weight (g) 256 261 268 274 282 289 300 302Shaft Length (inch) Graphite 37.25 36.75 36.25 35.75 35.25 34.75 34.25 34.25Swing Weight Graphite C5 C6 C7

Based on #7

Shaft Options Graphite: L50 LightShaft Flex FLTotal Weight (g) 355Shaft Weight (g) 50Torque (°) 40

Loft (°) Lie (°) Head Weight (g) Length (inch)3 72 358 33

WOMENS FW

WOMENS HYBRID

WOMENS IRONS

WOMENS IRONS

Face Angle (°) 0.5 (CL)Volume (ml) 440Head Weight (g) 193Shaft Weight (g) 52Torque (°) 5.6Club Length (inch) 44.5Swing Weight (g) C5Club Weight (g) 292

#3 #5 #7Shaft Name L50 LightShaft Flex FL FL FL Loft Angle (°) 18 21 24Lie Angle (°) 58 58.5 59Face Angle (°) 0 0 0Volume (ml) 171 167 163Head Weight (g) 210 214 219Shaft Weight (g) 54 53 52Torque (°) 5.8Club Length (inch) 42.25 41.75 41.25Swing Weight (g) C5Club Weight (g) 311 314 318

#4 #5 #6 #7Shaft Name L50 LightShaft Flex FL FL FL FL Loft Angle (°) 23 26 29 32Lie Angle (°) 58.5 59 59.5 60Face Angle (°) 0Volume (ml) 112 111 110 109Head Weight (g) 240 246 252 258Shaft Weight (g) 54 53 52 52Torque (°) 4Club Length (inch) 38.5 38 37.5 37Swing Weight (g) C5Club Weight (g) 341 346 351 357

No. 5 6 7 8 9 PW AW SWShaft Options L50 LightLoft (°) 25 27 30 34 39 44 50 56Lie (°) 61.5 62 62.5 63 63.5 64 64 64Face Progression (mm) 1.5 1.5 1.5 2 2.5 3 3.5 5Head Weight (g) 256 261 268 274 282 289 300 302Shaft Length (inch) Graphite 37.25 36.75 36.25 35.75 35.25 34.75 34.25 34.25Swing Weight Graphite C5 C6 C7

Based on #7

Shaft Graphite: L50 LightShaft Flex FLTotal Weight (g) 355Shaft Weight (g) 50Torque (°) 40

Anti-slip Groove Face provides responsive feel, improved consistency and straighter roll.

Mallet head design for stable accurate putting.

Black PVD finish provides an ultra-premium look and feel while reducing glare.

Prominent alignment aid for easy set-up.

3.2mm 2.7mm

Deep cavity for enlarged sweet spotDeeper cavity behind the club face enlarges the sweet spot.

The deeper cavity and high flex face create an enlarged sweet spot for maximum distance and forgiveness.

EZONE ELITE WOMEN / IRON38 EZONE ELITE WOMEN / PUTTER 39

Page 39: The spirit of ‘Made in Japan’€¦ · 40 REXIS XELA SHAFTS 41 REXIS KAIZA SHAFTS GOLF GEAR 43 BAGS / ACCESSORIES. The spirit of ‘Made in Japan’ craftsmanship and technology

3.2mm 2.7mm

Octaforce technology in the faceApplied to the rear area of the face providing a lower centre of gravity and more repulsion.

Toe-Heel weight flowMaintaining the same centre of gravity length, weight is distributed more on the toe-side for shorter irons. This promotes a draw on the longer irons and reduces pulls on the shorter irons.

EZONE Elite Iron EZONE Elite PutterThe Anti-Slip Groove Face provides responsive feel, improved consistency and a truer roll.

WOMENS DRIVER

WOMENS FW

WOMENS HYBRID

WOMENS IRONS

WOMENS IRONS

Shaft Name L50 LightShaft Flex FL FLLoft Angle (°) 12 14Lie Angle (°) 60Face Angle (°) 0.5 (CL)Volume (ml) 440Head Weight (g) 193Shaft Weight (g) 52Torque (°) 5.6Club Length (inch) 44.5Swing Weight (g) C5Club Weight (g) 292

#3 #5 #7Shaft Name L50 LightShaft Flex FL FL FL Loft Angle (°) 18 21 24Lie Angle (°) 58 58.5 59Face Angle (°) 0 0 0Volume (ml) 171 167 163Head Weight (g) 210 214 219Shaft Weight (g) 54 53 52Torque (°) 5.8Club Length (inch) 42.25 41.75 41.25Swing Weight (g) C5Club Weight (g) 311 314 318

#4 #5 #6 #7Shaft Name L50 LightShaft Flex FL FL FL FL Loft Angle (°) 23 26 29 32Lie Angle (°) 58.5 59 59.5 60Face Angle (°) 0Volume (ml) 112 111 110 109Head Weight (g) 240 246 252 258Shaft Weight (g) 54 53 52 52Torque (°) 4Club Length (inch) 38.5 38 37.5 37Swing Weight (g) C5Club Weight (g) 341 346 351 357

No. 5 6 7 8 9 PW AW SWShaft L50 LightLoft (°) 25 27 30 34 39 44 50 56Lie (°) 61.5 62 62.5 63 63.5 64 64 64Face Progression (mm) 1.5 1.5 1.5 2 2.5 3 3.5 5Head Weight (g) 256 261 268 274 282 289 300 302Shaft Length (inch) Graphite 37.25 36.75 36.25 35.75 35.25 34.75 34.25 34.25Swing Weight Graphite C5 C6 C7

Based on #7

L50 Light shaft for additional energy transfer and ball strike acceleration.

WOMENS HYBRID

WOMENS IRONS

WOMENS IRONS

WOMENS PUTTERS

#3 #5 #7Shaft Name L50 LightShaft Flex FL FL FL Loft Angle (°) 18 21 24Lie Angle (°) 58 58.5 59Face Angle (°) 0 0 0Volume (ml) 171 167 163Head Weight (g) 210 214 219Shaft Weight (g) 54 53 52Torque (°) 5.8Club Length (inch) 42.25 41.75 41.25Swing Weight (g) C5Club Weight (g) 311 314 318

#4 #5 #6 #7Shaft Name L50 LightShaft Flex FL FL FL FL Loft Angle (°) 23 26 29 32Lie Angle (°) 58.5 59 59.5 60Face Angle (°) 0Volume (ml) 112 111 110 109Head Weight (g) 240 246 252 258Shaft Weight (g) 54 53 52 52Torque (°) 4Club Length (inch) 38.5 38 37.5 37Swing Weight (g) C5Club Weight (g) 341 346 351 357

No. 5 6 7 8 9 PW AW SWShaft Options L50 LightLoft (°) 25 27 30 34 39 44 50 56Lie (°) 61.5 62 62.5 63 63.5 64 64 64Face Progression (mm) 1.5 1.5 1.5 2 2.5 3 3.5 5Head Weight (g) 256 261 268 274 282 289 300 302Shaft Length (inch) Graphite 37.25 36.75 36.25 35.75 35.25 34.75 34.25 34.25Swing Weight Graphite C5 C6 C7

Based on #7

Shaft Options Graphite: L50 LightShaft Flex FLTotal Weight (g) 355Shaft Weight (g) 50Torque (°) 40

Loft (°) Lie (°) Head Weight (g) Length (inch)3 72 358 33

WOMENS FW

WOMENS HYBRID

WOMENS IRONS

WOMENS IRONS

Face Angle (°) 0.5 (CL)Volume (ml) 440Head Weight (g) 193Shaft Weight (g) 52Torque (°) 5.6Club Length (inch) 44.5Swing Weight (g) C5Club Weight (g) 292

#3 #5 #7Shaft Name L50 LightShaft Flex FL FL FL Loft Angle (°) 18 21 24Lie Angle (°) 58 58.5 59Face Angle (°) 0 0 0Volume (ml) 171 167 163Head Weight (g) 210 214 219Shaft Weight (g) 54 53 52Torque (°) 5.8Club Length (inch) 42.25 41.75 41.25Swing Weight (g) C5Club Weight (g) 311 314 318

#4 #5 #6 #7Shaft Name L50 LightShaft Flex FL FL FL FL Loft Angle (°) 23 26 29 32Lie Angle (°) 58.5 59 59.5 60Face Angle (°) 0Volume (ml) 112 111 110 109Head Weight (g) 240 246 252 258Shaft Weight (g) 54 53 52 52Torque (°) 4Club Length (inch) 38.5 38 37.5 37Swing Weight (g) C5Club Weight (g) 341 346 351 357

No. 5 6 7 8 9 PW AW SWShaft Options L50 LightLoft (°) 25 27 30 34 39 44 50 56Lie (°) 61.5 62 62.5 63 63.5 64 64 64Face Progression (mm) 1.5 1.5 1.5 2 2.5 3 3.5 5Head Weight (g) 256 261 268 274 282 289 300 302Shaft Length (inch) Graphite 37.25 36.75 36.25 35.75 35.25 34.75 34.25 34.25Swing Weight Graphite C5 C6 C7

Based on #7

Shaft Graphite: L50 LightShaft Flex FLTotal Weight (g) 355Shaft Weight (g) 50Torque (°) 40

Anti-slip Groove Face provides responsive feel, improved consistency and straighter roll.

Mallet head design for stable accurate putting.

Black PVD finish provides an ultra-premium look and feel while reducing glare.

Prominent alignment aid for easy set-up.

3.2mm 2.7mm

Deep cavity for enlarged sweet spotDeeper cavity behind the club face enlarges the sweet spot.

The deeper cavity and high flex face create an enlarged sweet spot for maximum distance and forgiveness.

EZONE ELITE WOMEN / IRON38 EZONE ELITE WOMEN / PUTTER 39

Page 40: The spirit of ‘Made in Japan’€¦ · 40 REXIS XELA SHAFTS 41 REXIS KAIZA SHAFTS GOLF GEAR 43 BAGS / ACCESSORIES. The spirit of ‘Made in Japan’ craftsmanship and technology

High performance and ultra-lightweight.

Flex

2F3

3F3

3F2

3F1

4R

4SR

4S

Weight (g)

28.5

31

36

39

42

44

46

Torque (°)�

10.5

9.1

6.5

6.5

6.0

6.0

6.0

Kick Point

LOW

Frequency (cpm)

173

168

193

203

218

233

243

REXIS SHAFTS40 REXIS SHAFTS 41

REXIS XELA High performance, ultra-lightweight shaft made with NANOMETRIC Carbon Graphite is designed for golfers looking for high impact speeds and greater distance.

NANOMETRIC is a material which applies the NANALLOYTM Technology of Toray Industries, Inc.

Rexis Graphite ShaftsCustom fit your clubs with the REXIS series from Yonex. REXIS shafts use innovative technologies that complement the characteristics of your swing, delivering increased energy transfer and superior shaft stability. The end result is a lighter, stronger, and more resilient shaft, which ultimately gives greater distance.

This high-kick point shaft stores explosive power in a downswing to unleash a fierce shot. It allows golfers to achieve hard-hitting impact and extra distance.

Shaft Composition: Nanometric DR, TOUGH G-FIBER, High-Modulus Ultra-Thin Multi-Layered Graphite

Flex

5R

5SR

5S

5X

6SR

6S

6X

7S

7X

Weight (g)

53

55

57

59

63

65

67

75

77

Torque (°)

4.4

4.4

4.3

4.3

3.1

3.1

3.1

2.9

2.9

Kick Point

HIGH

Frequency (cpm)

233

243

253

263

248

258

268

263

273

Maximised butt-stiff and tip-soft flexibility gap provides the biggest acceleration in the series. Utilising an innovative manufacturing process to produce an extraordinary ultra-thin, multi-layered Graphite structure, the shaft provides an effortless swing which improves initial velocity.

Shaft Composition: Nanometric DR, Reinforced High-Modulus Ultra-Thin Multi-Layered Graphite

Flex

5R

5SR

5S

5X

6SR

6S

6X

7S

7X

Weight (g)

52

54

56

58

62

64

66

74

76

Torque (°)

3.6

3.6

3.6

3.6

2.8

2.8

2.8

2.4

2.4

Kick Point

LOW

Frequency (cpm)

233

243

253

263

248

258

268

263

273

Mid-soft profile that suits a wide range of swings ensuring a straight penetrating trajectory. Utilising an innovative manufacturing process to produce an extraordinary ultra-thin, multi-layered Graphite structure, the shaft provides an effortless swing which improves initial velocity.

Shaft Composition: High-Modulus Ultra-Thin Multi-Layered Graphite

Flex

5R

5SR

5S

5X

6SR

6S

6X

7S

7X

Weight (g)

57

59

60

62

64

66

68

77

79

Torque (°)

3.9

3.9

3.9

3.9

3.3

3.3

3.3

3.0

3.0

Kick Point

MID

Frequency (cpm)

233

243

253

263

248

258

268

263

273

Designed for golfers with a faster swing who strike the ball hard and who prefer a strong draw. A stable, effortless swing is produced via the ultra-thin, multi-layered Graphite structure, which is produced utilising an innovative manufacturing process.

Shaft Composition: High-Modulus Ultra-Thin Multi-Layered Graphite

Flex

5R

5SR

5S

5X

6SR

6S

6X

7S

7X

Weight (g)

53

55

57

59.5

62

64

66

72

74

Torque (°)

3.8

3.8

3.8

3.8

3.0

3.0

3.0

2.7

2.7

Kick Point

MID/LOW

Frequency (cpm)

233

243

253

263

248

258

268

263

273

Designed for golfers aiming to hit shots with a strong fade. An innovative manufacturing process is used to give the shaft an ultra-thin, multi-layered Graphite structure that is stable and easy to swing. Hitting a hook shot is no longer a problem with this accurate ultra-thin multi-layered Graphite shaft. Shaft Composition: High-Modulus Ultra-Thin Multi-Layered Graphite

Flex

5R

5SR

5S

5X

6SR

6S

6X

7S

7X

Weight (g)

53

55

57

59

65

67

69

75

77

Torque (°)

3.7

3.7

3.7

3.7

3.0

3.0

3.0

2.6

2.6

Kick Point

MID/HIGH

Frequency (cpm)

233

243

253

263

248

258

268

263

273

Page 41: The spirit of ‘Made in Japan’€¦ · 40 REXIS XELA SHAFTS 41 REXIS KAIZA SHAFTS GOLF GEAR 43 BAGS / ACCESSORIES. The spirit of ‘Made in Japan’ craftsmanship and technology

High performance and ultra-lightweight.

Flex

2F3

3F3

3F2

3F1

4R

4SR

4S

Weight (g)

28.5

31

36

39

42

44

46

Torque (°)�

10.5

9.1

6.5

6.5

6.0

6.0

6.0

Kick Point

LOW

Frequency (cpm)

173

168

193

203

218

233

243

REXIS SHAFTS40 REXIS SHAFTS 41

REXIS XELA High performance, ultra-lightweight shaft made with NANOMETRIC Carbon Graphite is designed for golfers looking for high impact speeds and greater distance.

NANOMETRIC is a material which applies the NANALLOYTM Technology of Toray Industries, Inc.

Rexis Graphite ShaftsCustom fit your clubs with the REXIS series from Yonex. REXIS shafts use innovative technologies that complement the characteristics of your swing, delivering increased energy transfer and superior shaft stability. The end result is a lighter, stronger, and more resilient shaft, which ultimately gives greater distance.

This high-kick point shaft stores explosive power in a downswing to unleash a fierce shot. It allows golfers to achieve hard-hitting impact and extra distance.

Shaft Composition: Nanometric DR, TOUGH G-FIBER, High-Modulus Ultra-Thin Multi-Layered Graphite

Flex

5R

5SR

5S

5X

6SR

6S

6X

7S

7X

Weight (g)

53

55

57

59

63

65

67

75

77

Torque (°)

4.4

4.4

4.3

4.3

3.1

3.1

3.1

2.9

2.9

Kick Point

HIGH

Frequency (cpm)

233

243

253

263

248

258

268

263

273

Maximised butt-stiff and tip-soft flexibility gap provides the biggest acceleration in the series. Utilising an innovative manufacturing process to produce an extraordinary ultra-thin, multi-layered Graphite structure, the shaft provides an effortless swing which improves initial velocity.

Shaft Composition: Nanometric DR, Reinforced High-Modulus Ultra-Thin Multi-Layered Graphite

Flex

5R

5SR

5S

5X

6SR

6S

6X

7S

7X

Weight (g)

52

54

56

58

62

64

66

74

76

Torque (°)

3.6

3.6

3.6

3.6

2.8

2.8

2.8

2.4

2.4

Kick Point

LOW

Frequency (cpm)

233

243

253

263

248

258

268

263

273

Mid-soft profile that suits a wide range of swings ensuring a straight penetrating trajectory. Utilising an innovative manufacturing process to produce an extraordinary ultra-thin, multi-layered Graphite structure, the shaft provides an effortless swing which improves initial velocity.

Shaft Composition: High-Modulus Ultra-Thin Multi-Layered Graphite

Flex

5R

5SR

5S

5X

6SR

6S

6X

7S

7X

Weight (g)

57

59

60

62

64

66

68

77

79

Torque (°)

3.9

3.9

3.9

3.9

3.3

3.3

3.3

3.0

3.0

Kick Point

MID

Frequency (cpm)

233

243

253

263

248

258

268

263

273

Designed for golfers with a faster swing who strike the ball hard and who prefer a strong draw. A stable, effortless swing is produced via the ultra-thin, multi-layered Graphite structure, which is produced utilising an innovative manufacturing process.

Shaft Composition: High-Modulus Ultra-Thin Multi-Layered Graphite

Flex

5R

5SR

5S

5X

6SR

6S

6X

7S

7X

Weight (g)

53

55

57

59.5

62

64

66

72

74

Torque (°)

3.8

3.8

3.8

3.8

3.0

3.0

3.0

2.7

2.7

Kick Point

MID/LOW

Frequency (cpm)

233

243

253

263

248

258

268

263

273

Designed for golfers aiming to hit shots with a strong fade. An innovative manufacturing process is used to give the shaft an ultra-thin, multi-layered Graphite structure that is stable and easy to swing. Hitting a hook shot is no longer a problem with this accurate ultra-thin multi-layered Graphite shaft. Shaft Composition: High-Modulus Ultra-Thin Multi-Layered Graphite

Flex

5R

5SR

5S

5X

6SR

6S

6X

7S

7X

Weight (g)

53

55

57

59

65

67

69

75

77

Torque (°)

3.7

3.7

3.7

3.7

3.0

3.0

3.0

2.6

2.6

Kick Point

MID/HIGH

Frequency (cpm)

233

243

253

263

248

258

268

263

273

Page 42: The spirit of ‘Made in Japan’€¦ · 40 REXIS XELA SHAFTS 41 REXIS KAIZA SHAFTS GOLF GEAR 43 BAGS / ACCESSORIES. The spirit of ‘Made in Japan’ craftsmanship and technology

Flex

8S

8X

9S

9X

Weight (g)

84

86

93

95

Torque (°)

3.6

3.6

2.9

2.9

Kick Point Frequency (cpm)

295

305

300

310

Mid

Flex

95S

95X

105S

105X

Weight (g)

81-104

83-106

91-114

93-116

Torque (°)

2.0-2.1

2.0-2.1

1.8-2.0

1.8-2.0

Kick Point Frequency (cpm)

335

345

340

350

Mid

Flex

7R

7SR

8SR

8S

Weight (g)

76

78

86

88

Torque (°)

3.0

3.0

2.4

2.4

Kick Point Frequency (cpm)

275

285

290

300

Mid

Shaft length: 991-902mm

Shaft length: 1070mm

Shaft length: 1000mm

Specifically designed for irons to be more forgiving and accurate than steel shafts, it features the new high performance TOUGH G-FIBER material. This unique glass fibre and carbon nanotube composite is 3 times softer than normal Graphite, yet gives you the control of a steel shaft but with the easy launch of a Graphite shaft.

Shaft Composition: TOUGH G-FIBER & Tungsten Reinforced Graphite

Specifically designed for irons, this shaft has increased stiffness at the butt-end and less stiffness in the mid section, to give you increased acceleration with the combination of a high launch and maximised spin for improved accuracy.

Shaft Composition: PHT Graphite

Improved flight control, with less pulls and increased ball speeds. Designed to deliver a high penetrating trajectory with stable spin performance. Best matches with KAIZA-Xi and steel shaft.

Shaft Composition: Nanometric DR, TOUGH G-FIBER, High-Modulus Ultra-Thin Multi-Layered Graphite

REXIS SHAFTS42 BAGS / ACCESSORIES 43

Water repellent fabric and fasteners / Waterproof and tape-sealed valuables pocket / Large capacity front and side pockets

Stand BagsThis full function stand bag is fully waterproof, ideal for use whatever the weather conditions.

Lift handle, heavy duty bottom and pedal for extra durability

Simple 5 way full-length dividers to avoid jams

Item Code: CB-7907EX / Size: 9.5 inch / Weight: 2.6kg/5.8lbs Materials: Polyester/Nylon / Colour: Navy/Grey, Grey/Red

MEN’SItem Code: CB-6909EXSize: 10.5 inchWeight: 3.0kg/6.6lbsMaterial: Polyester 95%, PU 5%Colour: Black/Red

Item: Yonex Golf UmbrellaColour: Black/White

Cart BagsDesigned specifically for carts, this bag offers you greater club protection with a 14 way club divider plus 10 functional pockets for practical storage.

14 Dividers Pull and electric-cart fit base

Roomy front pocket

Roomy side pocket

WOMEN’SItem Code: CB-6809EXSize: 10.5 inchWeight: 2.7kg/5.9lbs Material: Polyester 95%, PU 5%Colour: Pink/White

Tour Pro Umbrella

Page 43: The spirit of ‘Made in Japan’€¦ · 40 REXIS XELA SHAFTS 41 REXIS KAIZA SHAFTS GOLF GEAR 43 BAGS / ACCESSORIES. The spirit of ‘Made in Japan’ craftsmanship and technology

Flex

8S

8X

9S

9X

Weight (g)

84

86

93

95

Torque (°)

3.6

3.6

2.9

2.9

Kick Point Frequency (cpm)

295

305

300

310

Mid

Flex

95S

95X

105S

105X

Weight (g)

81-104

83-106

91-114

93-116

Torque (°)

2.0-2.1

2.0-2.1

1.8-2.0

1.8-2.0

Kick Point Frequency (cpm)

335

345

340

350

Mid

Flex

7R

7SR

8SR

8S

Weight (g)

76

78

86

88

Torque (°)

3.0

3.0

2.4

2.4

Kick Point Frequency (cpm)

275

285

290

300

Mid

Shaft length: 991-902mm

Shaft length: 1070mm

Shaft length: 1000mm

Specifically designed for irons to be more forgiving and accurate than steel shafts, it features the new high performance TOUGH G-FIBER material. This unique glass fibre and carbon nanotube composite is 3 times softer than normal Graphite, yet gives you the control of a steel shaft but with the easy launch of a Graphite shaft.

Shaft Composition: TOUGH G-FIBER & Tungsten Reinforced Graphite

Specifically designed for irons, this shaft has increased stiffness at the butt-end and less stiffness in the mid section, to give you increased acceleration with the combination of a high launch and maximised spin for improved accuracy.

Shaft Composition: PHT Graphite

Improved flight control, with less pulls and increased ball speeds. Designed to deliver a high penetrating trajectory with stable spin performance. Best matches with KAIZA-Xi and steel shaft.

Shaft Composition: Nanometric DR, TOUGH G-FIBER, High-Modulus Ultra-Thin Multi-Layered Graphite

REXIS SHAFTS42 BAGS / ACCESSORIES 43

Water repellent fabric and fasteners / Waterproof and tape-sealed valuables pocket / Large capacity front and side pockets

Stand BagsThis full function stand bag is fully waterproof, ideal for use whatever the weather conditions.

Lift handle, heavy duty bottom and pedal for extra durability

Simple 5 way full-length dividers to avoid jams

Item Code: CB-7907EX / Size: 9.5 inch / Weight: 2.6kg/5.8lbs Materials: Polyester/Nylon / Colour: Navy/Grey, Grey/Red

MEN’SItem Code: CB-6909EXSize: 10.5 inchWeight: 3.0kg/6.6lbsMaterial: Polyester 95%, PU 5%Colour: Black/Red

Item: Yonex Golf UmbrellaColour: Black/White

Cart BagsDesigned specifically for carts, this bag offers you greater club protection with a 14 way club divider plus 10 functional pockets for practical storage.

14 Dividers Pull and electric-cart fit base

Roomy front pocket

Roomy side pocket

WOMEN’SItem Code: CB-6809EXSize: 10.5 inchWeight: 2.7kg/5.9lbs Material: Polyester 95%, PU 5%Colour: Pink/White

Tour Pro Umbrella

Page 44: The spirit of ‘Made in Japan’€¦ · 40 REXIS XELA SHAFTS 41 REXIS KAIZA SHAFTS GOLF GEAR 43 BAGS / ACCESSORIES. The spirit of ‘Made in Japan’ craftsmanship and technology

yonex.co.uk

yonex.co.uk yonex.co.uk @YONEXGOLF_UK In keeping with our policy of constant product refinement, we reserve the right to make product changes at any time without prior notice.

©Yonex Co.Ltd. February 2018 UK