The Process of Brick Making in Hyderabad
-
Upload
the-modern-story -
Category
Documents
-
view
4.008 -
download
3
description
Transcript of The Process of Brick Making in Hyderabad
THE PROCESS OF BRICK-MAKING
IN HYDERABAD
A PROJECT BY NEHA
Important Components Of Brick Making 1
Important Components Of Brick Making 2.
The Raw Materials
This wood sheet is used as the stand for bricks, because when the bricks are ready they are wet, so we cant touch them and that’s why we are using this wood stand.
HOW TO MIX THE MATERIALS
They are mixing the materials: chopped stone, cement,white sand and water.
How to start the machine...
First , connect
the the wire
which is on
the standing pole.
HOW TO START THE WORK
First, arrange the wood sheet in the machine, below the two
holes.
Secondly, pull the wood handle and move it round so you can see the two holes
Then fill the material on the two holes, and manage it
equally.
Then pull up the handle and move it around like this.
Afterwards, back to the old position and push the handle harder in down way.
Then pull it up... See we got the shape!
T
The other laborers are taking the bricks out of the
machine.
They are arranging the bricks in a line.
This is the arranging style of the bricks when they wet.
At evening time the bricks are almost dry so they remove the wood stand and
arrange it in different styles..
Next morning, the water should be applied to the brick and they become more harder.
Transport facilities of the material..
Different kinds of bricks.
Project presented by “NehA”..
NEHA